| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"We've finally gotten rid of the struct clk_ops::round_rate() code
after months of effort from Brian Masney. Now the only option is to
use determine_rate(), which is good because that takes a struct
argument instead of just a couple unsigned longs, allowing us to
easily modify the way we determine and set rates in the clk tree.
Beyond that core framework change we've got the typical pile of new
SoC clk driver additions, fixes for clk data and/or adding missing
clks because the consumer driver using those clks wasn't ready, etc.
The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
pretty normal.
Core:
- Remove the round_rate() clk op (yay!)
New Drivers:
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
- Global TCSR, RPMh, and display clock controller support for the
Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller support
for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Clock driver for the Rockchip RV1103B SoC
- Initial support for the Renesas RZ/G3L (R9A08G046) SoC
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
clk: visconti: pll: initialize clk_init_data to zero
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
...
|
|
'clk-cleanup' into clk-next
* clk-samsung:
clk: samsung: exynos850: Add APM-to-AP mailbox clock
dt-bindings: clock: exynos850: Add APM_AP MAILBOX clock
clk: samsung: Use %pe format to simplify
clk: samsung: pll: Fix possible truncation in a9fraco recalc rate
clk: samsung: exynosautov920: add block G3D clock support
dt-bindings: clock: exynosautov920: add G3D clock definitions
clk: samsung: gs101: harmonise symbol names (clock arrays)
clk: samsung: artpec-9: Add initial clock support for ARTPEC-9 SoC
clk: samsung: Add clock PLL support for ARTPEC-9 SoC
dt-bindings: clock: Add ARTPEC-9 clock controller
* clk-qcom: (67 commits)
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
dt-bindings: clock: qcom: Add CMN PLL support for IPQ8074
clk: qcom: ipq-cmn-pll: Add IPQ6018 SoC support
dt-bindings: clock: qcom: Add CMN PLL support for IPQ6018
clk: qcom: gdsc: Fix error path on registration of multiple pm subdomains
dt-bindings: clock: qcom: Add missing power-domains property
clk: qcom: gcc-eliza: Enable FORCE_MEM_CORE_ON for UFS AXI PHY clock
clk: qcom: dispcc-sc7180: Add missing MDSS resets
...
* clk-round:
clk: divider: remove divider_round_rate() and divider_round_rate_parent()
clk: divider: remove divider_ro_round_rate_parent()
clk: remove round_rate() clk ops
clk: composite: convert from round_rate() to determine_rate()
clk: test: remove references to clk_ops.round_rate
* clk-sai:
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
* clk-cleanup:
clk: visconti: pll: initialize clk_init_data to zero
clk: xgene: Fix mapping leak in xgene_pllclk_init()
clk: Simplify clk_is_match()
clk: baikal-t1: Remove not-going-to-be-supported code for Baikal SoC
clk: mvebu: armada-37xx-periph: fix __iomem casts in structure init
clk: qoriq: avoid format string warning
|
|
'clk-allwinner' into clk-next
* clk-tenstorrent:
clk: tenstorrent: Add Atlantis clock controller driver
reset: tenstorrent: Add reset controller for Atlantis
dt-bindings: clk: tenstorrent: Add tenstorrent,atlantis-prcm-rcpu
* clk-rockchip:
clk: rockchip: rk3568: Add PCIe pipe clock gates
clk: rockchip: Add clock controller for the RV1103B
dt-bindings: clock: rockchip: Add RV1103B CRU support
* clk-imx:
clk: imx8mq: Correct the CSI PHY sels
clk: vf610: Add support for the Ethernet switch clocks
dt-bindings: clock: vf610: Add definitions for MTIP L2 switch
dt-bindings: clock: vf610: Drop VF610_CLK_END define
clk: vf610: Move VF610_CLK_END define to clk-vf610 driver
clk: imx: imx8-acm: fix flags for acm clocks
clk: imx: imx6q: Fix device node reference leak in of_assigned_ldb_sels()
clk: imx: imx6q: Fix device node reference leak in pll6_bypassed()
clk: imx: fracn-gppll: Add 477.4MHz support
clk: imx: fracn-gppll: Add 333.333333 MHz support
clk: imx: pll14xx: Use unsigned format specifier
dt-bindings: clock: imx6q[ul]-clock: add optional clock enet[1]_ref_pad
* clk-allwinner:
clk: sunxi-ng: sun55i-a523-r: Add missing r-spi module clock
|
|
'clk-mediatek' into clk-next
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
* clk-fixes:
clk: spacemit: ccu_mix: fix inverted condition in ccu_mix_trigger_fc()
clk: microchip: mpfs-ccc: fix out of bounds access during output registration
clk: qcom: dispcc-sm8450: use RCG2 ops for DPTX1 AUX clock source
* clk-renesas:
clk: renesas: Add support for RZ/G3L SoC
dt-bindings: clock: renesas,rzg2l-cpg: Document RZ/G3L SoC
clk: renesas: rzg2l: Re-enable critical module clocks during resume
clk: renesas: rzg2l: Add rzg2l_mod_clock_init_mstop_helper()
clk: renesas: rzg2l: Add helper for mod clock enable/disable
clk: renesas: r9a0{7g04[34],8g045}: Add critical reset entries
clk: renesas: rzg2l: Add support for critical resets
clk: renesas: r9a09g056: Remove entries for WDT{0,2,3}
clk: renesas: r9a06g032: Enable watchdog reset sources
clk: renesas: cpg-mssr: Use struct_size() helper
clk: renesas: r9a09g047: Add PCIe clocks and reset
clk: renesas: r9a09g057: Add PCIe clocks and reset
clk: renesas: r9a09g056: Add PCIe clocks and reset
clk: renesas: r9a09g047: Add entries for the RSPIs
clk: renesas: r9a09g056: Add clock and reset entries for RTC
clk: renesas: r9a09g057: Remove entries for WDT{0,2,3}
clk: renesas: r9a09g056: Fix ordering of module clocks array
clk: renesas: r9a09g057: Fix ordering of module clocks array
* clk-rpi:
clk: bcm: rpi: Manage clock rate in prepare/unprepare callbacks
* clk-eswin:
MAINTAINERS: Add entry for ESWIN EIC7700 clock driver
clk: eswin: Add eic7700 clock driver
clk: divider: Add devm_clk_hw_register_divider_parent_data
dt-bindings: clock: eswin: Documentation for eic7700 SoC
* clk-mediatek:
clk: airoha: Add econet EN751221 clock/reset support to en7523-scu
dt-bindings: clock, reset: Add econet EN751221
|
|
Declare the PLLs and fixed factors found in the EyeQ6Lplus OLB as part
of the match data for the "mobileye,eyeq6lplus-olb" compatible.
The PLL and fixed factor of the CPU are registered in early init as they
are required during the boot by the GIC timer.
Also select clk-eyeq for all EYEQ SoCs instead of listing each one
individually, as it is needed by all Mobileye EyeQ SoC.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The i.MX8M/Mini/Nano/Plus variant of the SAI IP has control registers
shifted by +8 bytes and requires additional bus clock. Add support for
the i.MX8M variant of the IP with this register shift and additional
clock.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
EcoNet EN751221 clock/reset driver is significantly similar to the
EN7523 / EN7581, however the EN751221 does not have a neat batch of clock
divider registers so there are fewer known clocks, and the frequency of
each clock is derived differently. This clock driver will probably work
correctly on EN751627, EN7528, and EN7580.
Signed-off-by: Caleb James DeLisle <cjd@cjdns.fr>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add clock drivers for the EIC7700 SoC. The clock controller on the ESWIN
EIC7700 provides various clocks to different IP blocks within the SoC.
Signed-off-by: Yifeng Huang <huangyifeng@eswincomputing.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com> # ebc77
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Xuyang Dong <dongxuyang@eswincomputing.com>
Tested-by: Bo Gan <ganboing@gmail.com> # hfp550
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
As noticed in the discussion [1] the Baikal SoC and platforms
are not going to be finalized, hence remove stale code.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add driver for clock controller in Tenstorrent Atlantis SoC. This version
of the driver covers clocks from RCPU subsystem.
5 types of clocks generated by this controller: PLLs (PLLs
with bypass functionality and an additional Gate clk at output), Shared
Gates (Multiple Gate clks that share an enable bit), standard Muxes,
Dividers and Gates. All clocks are implemented using custom clk ops and
use the regmap interface associated with the syscon. All clocks are derived
from a 24 Mhz oscillator.
The reset controller is also setup as an auxiliary device of the clock
controller.
Signed-off-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Drew Fustini <fustini@kernel.org>
Signed-off-by: Drew Fustini <fustini@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"Not much changed in the clk framework this time except the clk.h
consumer API moved the context saving APIs around to fix a build error
in certain configurations.
There was a change to the core framework for CLK_OPS_PARENT_ENABLE
behavior during registration, but it wrecked existing drivers that
didn't expect things to be turned off during clk registration so it
got reverted.
This cycle is really a large collection of new clk drivers, primarily
for Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed.
Another big change in here is support for automatic hardware clock
gating on Samsung SoCs where the clks turn on and off when needed.
Ideally more vendors move to this method for better power savings. The
highlights are in the updates section below.
Beyond all the new drivers we have a bunch of cleanups like converting
drivers from divider_round_rate() to divider_determine_rate() and
using scoped for each OF child loops. Otherwise it's the usual data
fixes and plugging reference leaks, etc. that's all pretty ordinary
but not critical enough to fix until the next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and
video clk controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and
RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and
resets on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (165 commits)
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: Disable KUNIT_UML_PCI
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
...
|
|
Prepare for long-term maintenance and future additions by introducing a
dedicated drivers/clk/aspeed/ subdirectory for ASPEED clock drivers.
Move the existing ASPEED clock drivers into the new
drivers/clk/aspeed/ subdirectory.
No functional change, file move only.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The BD72720 has similar simple clk gate as a few other ROHM PMICs.
Add support for BD72720 clk gate.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/742e76cd0b87e726818d4fddc534a29298697b6b.1765804226.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's a bunch of patches here across drivers/clk/ to migrate drivers
to use struct clk_ops::determine_rate() instead of the round_rate()
one so that we can remove the round_rate clk_op entirely. Brian has
taken up that task which nobody else has wanted to do for close to a
decade. Thanks Brian!
This is all prerequisite work to get to the real task of improving the
clk rate setting process. Once we have determine_rate() used
everywhere, we'll be able to do things like chain the rate request
structs in linked lists to order the rate setting operations or add
more parameters without having to change every clk driver in
existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad
this is getting done.
Beyond this change we also have a tweak to the clk_lookup() function
in the core framework to use hashing on the clk name instead of a clk
tree walk with string comparisons. We _still_ rely on the clk name to
be unique, because historically we've used globally unique strings to
describe the clk tree topology. This tree walk becomes increasingly
slow as more clks are added to the system. Searching from the roots
for a duplicate is simple but pretty dumb and it wastes boot time so
we're using a hash table as an improvement. Ideally we wouldn't rely
on the strings to be unique at all, relegating them to simply debug
information, but that is future work that will likely require some
sort of Kconfig knob indicating strings aren't used for topology
description.
Outside of the core framework changes we have the usual new SoC
support and fixes to clk drivers for things that were discovered once
the clks were used by consumer drivers. Nothing in particular is
jumping out at me in the "misc" pile, except maybe the Amlogic driver
that has gone through a refactoring. That series got a fix from
testing in -next though so it seems likely that things have been
getting good test coverage for a couple weeks already"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
reset: aspeed: register AST2700 reset auxiliary bus device
dt-bindings: clock: ast2700: modify soc0/1 clock define
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
...
|
|
'clk-loongson' into clk-next
- Add Mediatek MT8196 clk drivers
* clk-marvell:
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
* clk-xilinx:
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
* clk-mediatek: (31 commits)
clk: mediatek: Add MT8196 vencsys clock support
clk: mediatek: Add MT8196 vdecsys clock support
clk: mediatek: Add MT8196 ovl1 clock support
clk: mediatek: Add MT8196 ovl0 clock support
clk: mediatek: Add MT8196 disp-ao clock support
clk: mediatek: Add MT8196 disp1 clock support
clk: mediatek: Add MT8196 disp0 clock support
clk: mediatek: Add MT8196 mfg clock support
clk: mediatek: Add MT8196 mdpsys clock support
clk: mediatek: Add MT8196 mcu clock support
clk: mediatek: Add MT8196 I2C clock support
clk: mediatek: Add MT8196 pextpsys clock support
clk: mediatek: Add MT8196 ufssys clock support
clk: mediatek: Add MT8196 peripheral clock support
clk: mediatek: Add MT8196 vlpckgen clock support
clk: mediatek: Add MT8196 topckgen2 clock support
clk: mediatek: Add MT8196 topckgen clock support
clk: mediatek: Add MT8196 apmixedsys clock support
dt-bindings: clock: mediatek: Describe MT8196 clock controllers
clk: mediatek: clk-mtk: Add MUX_DIV_GATE macro
...
* clk-loongson:
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
|
|
The RISC-V platform management interface (RPMI) is only available on
RISC-V platforms. Hence add a dependency on RISCV, to prevent asking
the user about this driver when configuring a kernel for a different
architecture.
Fixes: 5ba9f520f41a33c9 ("clk: Add clock driver for the RISC-V RPMI clock service group")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
The RPMI specification defines a clock service group which can be
accessed via SBI MPXY extension or dedicated S-mode RPMI transport.
Add mailbox client based clock driver for the RISC-V RPMI clock
service group.
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Co-developed-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Link: https://lore.kernel.org/r/20250818040920.272664-11-apatel@ventanamicro.com
[pjw@kernel.org: converted rpmi_clkrate_u64 macro to a function; replaced bare constant with a macro]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
The power domain driver shares the APMU clock controller's registers.
Instantiate the power domain driver through the APMU clock driver using
the auxiliary bus.
Also create a separate Kconfig entry for the PXA1908 clock driver to
allow (de)selecting the driver at will and selecting
CONFIG_AUXILIARY_BUS.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
There are very rare randconfig builds that turn on this driver but
don't already select CONFIG_AUXILIARY_BUS from another driver, and
this results in a build failure:
arm-linux-gnueabi-ld: drivers/clk/clk-npcm8xx.o: in function `npcm8xx_clock_driver_init':
clk-npcm8xx.c:(.init.text+0x18): undefined reference to `__auxiliary_driver_register'
Select the bus here, as all other clk drivers using it do.
Fixes: e0b255df027e ("clk: npcm8xx: add clock controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250807072241.4190376-1-arnd@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.
The big part of the diff is all the new Qualcomm clk drivers added for
a few SoCs they're working on. The other two vendors with significant
work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
to existing drivers and supports some new SoCs while Amlogic is
starting a significant refactoring to simplify their code.
The core framework gained a pair of helpers to get the 'struct device'
or 'struct device_node' associated with a 'struct clk_hw'. Some
associated KUnit tests were added for these simple helpers as well.
Beyond that core change there are lots of little fixes throughout the
clk drivers for the stuff we see every day, wrong clk driver data that
affects tree topology or supported frequencies, etc. They're not found
until the clks are actually used by some consumer device driver.
New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock
controller for the Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm
QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N
Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis
tools and possibly real humans
- A lot of little fixes here and there to things like clk tree
topology, missing frequencies, flagging clks as critical, etc"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
...
|
|
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250612-apple-kconfig-defconfig-v1-3-0e6f9cb512c1@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
RaspberryPi RP1 is an MFD providing, among other peripherals, several
clock generators and PLLs that drives the sub-peripherals.
Add the driver to support the clock providers.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20250529135052.28398-4-andrea.porta@suse.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
The clock tree of K1 SoC contains three main types of clock hardware
(PLL/DDN/MIX) and has control registers split into several multifunction
devices: APBS (PLLs), MPMU, APBC and APMU.
All register operations are done through regmap to ensure atomicity
between concurrent operations of clock driver and reset,
power-domain driver that will be introduced in the future.
Signed-off-by: Haylen Chu <heylenay@4d2.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Inochi Amaoto <inochiama@outlook.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250416135406.16284-4-heylenay@4d2.org
Signed-off-by: Yixun Lan <dlan@gentoo.org>
|
|
'clk-bindings' into clk-next
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- Convert more clk bindings to YAML
* clk-mobileye:
clk: eyeq: add EyeQ6H west fixed factor clocks
clk: eyeq: add EyeQ6H central fixed factor clocks
clk: eyeq: add EyeQ5 fixed factor clocks
clk: eyeq: add fixed factor clocks infrastructure
clk: eyeq: require clock index with phandle in all cases
clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
clk: eyeq: add driver
clk: divider: Introduce CLK_DIVIDER_EVEN_INTEGERS flag
dt-bindings: clock: add Mobileye EyeQ6L/EyeQ6H clock indexes
Revert "dt-bindings: clock: mobileye,eyeq5-clk: add bindings"
* clk-twl:
clk: twl: add TWL6030 support
clk: twl: remove is_prepared
* clk-nuvoton:
clk: npcm8xx: add clock controller
reset: npcm: register npcm8xx clock auxiliary bus device
dt-bindings: reset: npcm: add clock properties
* clk-renesas:
clk: renesas: vbattb: Add VBATTB clock driver
clk: Add devm_clk_hw_register_gate_parent_hw()
clk: renesas: rzg2l: Fix FOUTPOSTDIV clk
dt-bindings: clock: renesas,r9a08g045-vbattb: Document VBATTB
clk: renesas: r9a08g045: Add power domain for RTC
clk: renesas: r9a08g045: Mark the watchdog and always-on PM domains as IRQ safe
clk: renesas: rzg2l-cpg: Use GENPD_FLAG_* flags instead of local ones
clk: renesas: rzg2l-cpg: Move PM domain power on in rzg2l_cpg_pd_setup()
dt-bindings: clock: r9a08g045-cpg: Add power domain ID for RTC
clk: renesas: r8a779h0: Drop CLK_PLL2_DIV2 to clarify ZCn clocks
clk: renesas: r9a09g057: Add clock and reset entries for ICU
clk: renesas: r9a09g057: Add CA55 core clocks
clk: renesas: Remove duplicate and trailing empty lines
* clk-bindings:
dt-bindings: clock: actions,owl-cmu: convert to YAML
dt-bindings: clock: ti: Convert mux.txt to json-schema
dt-bindings: clock: ti: Convert divider.txt to json-schema
dt-bindings: clock: ti: Convert interface.txt to json-schema
dt-bindings: clock: convert rockchip,rk3328-cru.txt to YAML
|
|
'clk-fixed-gate' into clk-next
- Various clk driver cleanups
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- KUnit tests for clk-assigned-rates{,-u64}
- Add a driver for gated fixed rate clocks
* clk-cleanup:
clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
clk: Fix invalid execution of clk_set_rate
clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
clk: lan966x: make it selectable for ARCH_LAN969X
clk: clk-apple-nco: Add NULL check in applnco_probe
clk: starfive: jh7110-pll: Mark the probe function as __init
clk: sophgo: avoid integer overflow in sg2042_pll_recalc_rate()
clk: tegra: use clamp() in tegra_bpmp_clk_determine_rate()
clk: cdce925: make regmap_cdce925_bus constant
clk: Drop explicit initialization of struct i2c_device_id::driver_data to 0
clk: clk-qoriq: Replace of_node_put() with __free()
clk: Remove unused clk_hw_rate_is_protected
* clk-mediatek:
clk: en7523: map io region in a single block
clk: en7523: move en7581_reset_register() in en7581_clk_hw_init()
clk: en7523: fix estimation of fixed rate for EN7581
clk: en7523: introduce chip_scu regmap
clk: en7523: move clock_register in hw_init callback
clk: en7523: remove REG_PCIE*_{MEM,MEM_MASK} configuration
dt-bindings: clock: airoha: Update reg mapping for EN7581 SoC.
clk: mediatek: Add drivers for MT6735 syscon clock and reset controllers
dt-bindings: clock: mediatek: Add bindings for MT6735 syscon clock and reset controllers
clk: mediatek: mt6735-apmixedsys: Fix an error handling path in clk_mt6735_apmixed_probe()
clk: ralink: mtmips: add mmc related clocks for SoCs MT7620, MT7628 and MT7688
clk: ralink: mtmips: fix clocks probe order in oldest ralink SoCs
clk: ralink: mtmips: fix clock plan for Ralink SoC RT3883
clk: mediatek: clk-mt8188-topckgen: Remove univpll from parents of mfg_core_tmp
clk: mediatek: Add drivers for MediaTek MT6735 main clock and reset drivers
dt-bindings: clock: Add MediaTek MT6735 clock and reset bindings
clk: mediatek: drop two dead config options
* clk-kunit:
clk: Allow kunit tests to run without OF_OVERLAY enabled
clk: test: Add KUnit tests for clock-assigned-rates{-u64} DT properties
of: kunit: Extract some overlay boiler plate into macros
clk: test: Add test managed of_clk_add_hw_provider()
* clk-xilinx:
clk: clocking-wizard: move dynamic reconfig setup behind flag
dt-bindings: clock: xilinx: describe whether dynamic reconfig is enabled
clk: clocking-wizard: move clock registration to separate function
clk: clocking-wizard: use devres versions of clk_hw API
clk: clocking-wizard: use newer clk_hw API
clk: clocking-wizard: simplify probe/remove with devres helpers
* clk-fixed-gate:
clk: clk-gpio: add driver for gated-fixed-clocks
clk: clk-gpio: use dev_err_probe for gpio-get failure
clk: clk-gpio: update documentation for gpio-gate clock
dt-bindings: clocks: add binding for gated-fixed-clocks
|
|
LAN969x uses the same LAN966x clock driver so make it selectable for
ARCH_LAN969X.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20241108112355.20251-1-robert.marko@sartura.hr
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add Mobileye EyeQ5, EyeQ6L and EyeQ6H clock controller driver. It is
both a platform driver and a hook onto of_clk_init() used for clocks
required early (GIC timer, UARTs).
For some compatible, it is both at the same time. eqc_early_init()
initialises early PLLs and exposes its own clock provider. It marks
other clocks as deferred. eqc_probe() adds all remaining clocks using
another clock provider.
It exposes read-only PLLs derived from the main crystal on board.
It also exposes another type of clocks: divider clocks.
They always have even divisors and have one PLL as parent.
This driver also bears the responsability for optional reset and pinctrl
auxiliary devices. The match data attached to the devicetree node
compatible indicate if such devices should be created. They all get
passed a pointer to the start of the OLB region.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241023-mbly-clk-v6-1-ca83e43daf93@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Some configurations want to enable CONFIG_KUNIT without enabling
CONFIG_OF_OVERLAY. The kunit overlay code already skips if
CONFIG_OF_OVERLAY isn't enabled, so these selects here aren't really
doing anything besides making it easier to run the tests without them
skipping. Remove the select and move the config setting to the
drivers/clk/.kunitconfig file so that the clk tests can be run with or
without CONFIG_OF_OVERLAY set to test either behavior.
Fixes: 5776526beb95 ("clk: Add KUnit tests for clk fixed rate basic type")
Fixes: 274aff8711b2 ("clk: Add KUnit tests for clks registered with struct clk_parent_data")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20241016212738.897691-1-sboyd@kernel.org
|
|
Add auxiliary driver to support Nuvoton Arbel BMC NPCM8XX contains an
integrated clock controller which generates and supplies clocks to all
modules within the BMC.
The NPCM8xx clock controller is created using the auxiliary device
framework and set up in the npcm reset driver since the NPCM8xx clock is
using the same register region.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Tested-by: Benjamin Fair <benjaminfair@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240912191038.981105-4-tmaimon77@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The TWL6030 has similar clocks, so add support for it. Take care of the
resource grouping handling needed.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://lore.kernel.org/r/20241014161109.2222-4-andreas@kemnade.info
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC update from Arnd Bergmann:
"Convert ep93xx to devicetree
This concludes a long journey towards replacing the old board files
with devictree description on the Cirrus Logic EP93xx platform.
Nikita Shubin has been working on this for a long time, for details
see the last post on
https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"
* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
net: cirrus: use u8 for addr to calm down sparse
dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
pinctrl: ep93xx: Fix raster pins typo
spi: ep93xx: update kerneldoc comments for ep93xx_spi
clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
clk: ep93xx: add module license
dmaengine: cirrus: remove platform code
ASoC: cirrus: edb93xx: Delete driver
ARM: ep93xx: soc: drop defines
ARM: ep93xx: delete all boardfiles
ata: pata_ep93xx: remove legacy pinctrl use
pwm: ep93xx: drop legacy pinctrl
ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
ARM: dts: ep93xx: Add EDB9302 DT
ARM: dts: ep93xx: add ts7250 board
ARM: dts: add Cirrus EP93XX SoC .dtsi
...
|
|
Rewrite EP93xx clock driver located in arch/arm/mach-ep93xx/clock.c
trying to do everything the device tree way:
- provide clock acces via of
- drop clk_hw_register_clkdev
- drop init code and use module_auxiliary_driver
Co-developed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Test that clks registered with 'struct clk_parent_data' work as
intended and can find their parents.
Cc: Christian Marangi <ansuelsmth@gmail.com>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-9-sboyd@kernel.org
|
|
Test that the fixed rate basic type clk works as intended.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-8-sboyd@kernel.org
|
|
clk-next
- Add support for the AP sub-system clock controller in the T-Head TH1520
* clk-qcom: (71 commits)
clk: qcom: Park shared RCGs upon registration
clk: qcom: ipq9574: Use icc-clk for enabling NoC related clocks
clk: qcom: common: Add interconnect clocks support
interconnect: icc-clk: Add devm_icc_clk_register
interconnect: icc-clk: Specify master/slave ids
dt-bindings: clock: qcom: Add AHB clock for SM8150
clk: qcom: gcc-x1e80100: Set parent rate for USB3 sec and tert PHY pipe clks
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
clk: qcom: kpss-xcc: Return of_clk_add_hw_provider to transfer the error
clk: qcom: lpasscc-sc8280xp: Constify struct regmap_config
clk: qcom: gcc-x1e80100: Fix halt_check for all pipe clocks
clk: qcom: gcc-ipq6018: update sdcc max clock frequency
clk: qcom: camcc-sm8650: Add SM8650 camera clock controller driver
dt-bindings: clock: qcom: Add SM8650 camera clock controller
dt-bindings: clock: qcom: Update the order of SC8280XP camcc header
clk: qcom: videocc-sm8550: Add SM8650 video clock controller
clk: qcom: videocc-sm8550: Add support for videocc XO clk ares
dt-bindings: clock: qcom: Add SM8650 video clock controller
dt-bindings: clock: qcom: Update SM8450 videocc header file name
clk: qcom: gpucc-sa8775p: Update wait_val fields for GPU GDSC's
...
* clk-rockchip:
dt-bindings: clock: rk3188-cru-common: remove CLK_NR_CLKS
clk: rockchip: rk3188: Drop CLK_NR_CLKS usage
clk: rockchip: Switch to use kmemdup_array()
clk: rockchip: rk3128: Add HCLK_SFC
dt-bindings: clock: rk3128: Add HCLK_SFC
dt-bindings: clock: rk3128: Drop CLK_NR_CLKS
clk: rockchip: rk3128: Drop CLK_NR_CLKS usage
clk: rockchip: rk3128: Add hclk_vio_h2p to critical clocks
clk: rockchip: rk3128: Export PCLK_MIPIPHY
dt-bindings: clock: rk3128: Add PCLK_MIPIPHY
* clk-sophgo:
clk: sophgo: Avoid -Wsometimes-uninitialized in sg2042_clk_pll_set_rate()
clk/sophgo: Using BUG() instead of unreachable() in mmux_get_parent_id()
clk: sophgo: Add SG2042 clock driver
dt-bindings: clock: sophgo: add clkgen for SG2042
dt-bindings: clock: sophgo: add RP gate clocks for SG2042
dt-bindings: clock: sophgo: add pll clocks for SG2042
* clk-thead:
clk: thead: Add support for T-Head TH1520 AP_SUBSYS clocks
dt-bindings: clock: Document T-Head TH1520 AP_SUBSYS controller
|
|
Add support for the AP sub-system clock controller in the T-Head TH1520.
This include CPU, DPU, GMAC and TEE PLLs.
Link: https://openbeagle.org/beaglev-ahead/beaglev-ahead/-/blob/main/docs/TH1520%20System%20User%20Manual.pdf
Co-developed-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Co-developed-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
Link: https://lore.kernel.org/r/20240711-th1520-clk-v3-2-6ff17bb318fb@tenstorrent.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Currently clk-gate tests for s390 fail as the tests create a pretend
clk-gate and use a "fake_reg" to emulate the expected behavior of the
clk_gate->reg. I added some debug statements to the driver and noticed
that the reg changes after initialization to -1, which is coming from an
error coming from zpci_load(). This is likely because the test is using
fake iomem and the s390 architecture likely isn't designed to handle
that. Turn off the clk-gate tests for s390 for now as there is no clear
work around for this problem as discussed in upstream conversation [1].
[1] https://lore.kernel.org/all/301cd41e6283c12ac67fb8c0f8d5c929.sboyd@kernel.org/T/#t
Signed-off-by: Audra Mitchell <audra@redhat.com>
Link: https://lore.kernel.org/r/20240702125539.524489-1-audra@redhat.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
