| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Add a new shell test to verify the feature. The test covers:
- Basic address remapping for user space samples.
- Pipe mode coverage for piped into.
- Callchain address remapping.
- Consistency of output before and after injection.
- Pipe mode report consistency.
- Dropping of samples that leak ASLR info (physical addresses).
- Kernel address remapping (utilizing a dedicated kernel-intensive VFS
dd workload to guarantee continuous timer interrupts sampling flow
inside kernel privilege states).
- Kernel report consistency with address normalization.
The test suite is hardened with global 'set -o pipefail' assertions
to catch pipeline failures, stream-consuming awk processors to handle
SIGPIPE signals, and a dedicated pipe output scenario validating raw
'perf inject -o -' stdout streams.
Note on kernel DSO normalization in the test script:
The test script deliberately normalizes all kernel DSOs to a generic
[kernel] tag before diffing, as obfuscating physical kernel addresses
forces perf report to occasionally shift samples between individual
modules and [kernel.kallsyms] due to the lack of valid host module
boundary maps.
Note on ARM:
Kernel-based ASLR test cases (test_kernel_aslr and test_kernel_report_aslr)
are skipped on ARM architectures (aarch64 and arm*) to bypass high latency
constraints (such as check_invariants() spending excessive execution time
in maps__split_kallsyms() on debug builds) and symbolization inconsistencies.
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: James Clark <james.clark@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Gabriel Marin <gmx@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
There is a subfolder for Coresight tests so might as well keep them all
in here.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We can use exit snapshot to limit the amount of trace to decode here
too. Also each call to objdump is quite expensive on kcore so limit it
to 2 samples instead of 30. We only want to see if there is no data at
all.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If we reduce the number of samples searched to speed up the test, then
there will be less chance of hitting one of these branches. Extend the
regex to cover all branches so the test will always pass.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Hits in modules return empty disassembly with vmlinux as an input to
objdump. Make the disassembly test more reliable by always using kcore.
And update the comments to say that this is supported by the script.
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
These are now unused and had various issues like not working with out of
source builds and being slow to compile. Delete them.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Like the name says, this should be the most basic test possible. Kernel
recording is slow and already has coverage on the systemwide test. Perf
report output also has coverage elsewhere. 'ls' also produces more trace
than 'true'.
We only want to test if the combination of recording options works at
all, so fix all of these things to make it as fast as possible.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The default buffer size for root is 4MB which is very slow to decode. We
only need a few KB to verify that the dd process is hit so reduce the
size to 128KB.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the common idiom for skipping tests if not running as root, which is
required for these tests.
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We already test branch output in perf script mode, but then retest it in
Perf report mode. This is more of a test of Perf itself than Coresight
because Perf uses the same samples to generate both outputs. Also we're
already testing instruction output in Perf report mode.
Remove this test for a speedup. On the systemwide test also remove the
Perf report test because systemwide mode records a lot more data so
running multiple tests on it has a big runtime impact.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The thread_loop test only looks for context IDs in the raw trace.
There's a lot more that can go wrong when decoding these, so replace it
with a test that looks at the final output for matching thread names and
symbols.
In the future we might use timestamps and context switch events to track
threads, so looking at context IDs in the raw trace wouldn't always
work.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Like asm_pure_loop, this memcpy test only checks that 10 of each of a
few trace packet types occur after recording a lot of trace, which isn't
more specific than other existing Coresight tests.
Assume it was supposed to be a stress test for dumping and replace it
with one that doesn't require a custom binary and checks for a specific
amount of raw output. Don't bother checking for packets because the
other tests that test decoding will catch issues with malformed data.
This also adds coverage for exit snapshot mode which was missing.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It's not obvious what this test is for so remove it. It's not a stress
test because it doesn't output lots of data and it's not a functional
test because it only looks for raw trace output. It seems to imply that
a program written in assembly influences whether trace would be
generated by the CPU or not, but the CPU doesn't know what language the
program is written in.
We already have lots of Coresight tests that test the full pipeline
including decoding, and in many more modes of operation than this one,
so if no trace was collected they will already fail leaving this one
redundant.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Testing a long sequence without branches seems like it would be better
as a decoder unit test, and this test doesn't test decoding either, so
it's not clear what bugs this is trying to catch.
The new deterministic workload has somewhat long sequences when built
unoptimized, and we can always increase them later if we want to. But
now we test that decoding always gives the same result for the same
sequence of code which we've never had before.
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Leo Yan <leo.yan@arm.com>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Run the context switch workload on one CPU and trace it to test that
symbols are attributed to the correct process and that the attribution
changes at the exact point that the context switch happened.
Reviewed-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Cc: Amir Ayupov <aaupov@meta.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mike Leach <mike.leach@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paschalis Mpeis <Paschalis.Mpeis@arm.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The 1.x branch of Babeltrace has been superseded by 2.x in 2020 and has
been unmaintained since 2022, efforts have started to remove it from
popular distributions.
Babeltrace 2.x offers a very similar 'ctf-writer' library that can be used
with minimal changes for the '--to-ctf' feature and has been packaged
since Debian 11 and Fedora 32.
This patch replaces the 'libbabeltrace' build feature with
'babeltrace2-ctf-writer' using pkgconfig detection, adjusts the naming of
the public headers and applies minor API cleanups.
There is no changes to the output ctf traces, the ctf-writer API still
implements version 1.8 of the CTF specification that can be read by
either Babeltrace 1 / 2 or any CTF compliant reader.
Also remove some ifdefs in the cli option parsing to allow printing the
helpful error message with '--to-ctf' when built without babeltrace2.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Derek Foreman <derek.foreman@collabora.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The -L/--lock-filter option is to specify target locks by name or
address. It's basically for global locks where name or address is known
and fixed. But 'mmap_lock' is a per-process lock so it cannot be used
for the -L option.
$ sudo perf lock con -ab -L mmap_lock
ignore unknown symbol: mmap_lock
libbpf: map 'addr_filter': failed to create: -EINVAL
libbpf: failed to load BPF skeleton 'lock_contention_bpf': -EINVAL
Failed to load lock-contention BPF skeleton
lock contention BPF setup failed
However, it's still a common source of contention especially in a large
process so we want to use it for the -L/--lock-filter option. As there
is check_lock_type() to check mmap_lock at runtime, let's used it to
filter mmap_locks as a special case.
Of course, this only works with -b/--use-bpf option.
$ sudo perf lock con -b -L mmap_lock -- perf bench mem mmap -f demand -t 2
# Running 'mem/mmap' benchmark:
# function 'demand' (Demand loaded mmap())
# Copying 1MB bytes ...
2.679184 GB/sec/thread ( +- 1.78% )
contended total wait max wait avg wait type caller
1 15.22 us 15.22 us 15.22 us rwsem:W __vm_munmap+0x7e
1 7.72 us 7.72 us 7.72 us rwsem:R lock_mm_and_find_vma+0x97
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suchit Karunakaran <suchitkarunakaran@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In test_intel_pt.sh, the test script compiled two external C programs at
runtime using /usr/bin/cc (a thread loop workload and a JIT self-
modifying workload). Relying on external C compilers inside shell tests
frequently causes failures in continuous integration environments.
Create a built-in 'jitdump' workload and switch test_intel_pt.sh to use
'perf test -w thloop' and 'perf test -w jitdump'. Also add multi-
architecture compatibility without external C compiler dependencies, the
workload instruction arrays dynamically encode CHK_BYTE into opcodes
across x86, ARM32, ARM64, RISC-V, PowerPC, MIPS, LoongArch, and s390x.
Some minor include fixes for util/jitdump.h.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a shell test script (test_test_junit_output.sh) to execute perf test
with the -j/--junit option and validate that the generated test report
complies perfectly with standard XML formatting using Python's
ElementTree XML parser.
Assisted-by: Gemini-CLI:Google Gemini 3
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a shell test that verifies the file_offset diagnostic messages
work correctly when perf encounters corrupted events.
The test corrupts a MMAP2 event's size field in a recorded perf.data
file, then checks that perf report produces warning messages that
include both the file offset (e.g. "at offset 0x2738:") and the
event type name with numeric id (e.g. "MMAP2 (10)").
This exercises the diagnostic improvements from the file_offset
series, which retrofitted all skip/stop/error messages to include
the position and type of the problematic event.
Reviewed-by: Ian Rogers <irogers@google.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a shell test that verifies perf report handles truncated perf.data
files gracefully — exiting with an error code rather than crashing with
SIGSEGV or SIGABRT.
The test records a simple workload, then truncates the resulting
perf.data at four offsets that exercise different parsing stages:
8 bytes — file header magic only
64 bytes — partial file header (attr section incomplete)
256 bytes — into the first events (partial event headers)
75% size — mid-stream truncation (partial event data)
For each truncation, perf report is run and the exit code is checked:
- Exit code 0 (success) fails the test — a truncated file should
never parse without error.
- Crash signals are detected portably via kill -l, which maps the
signal number to a name on the running system. This handles
architectures where signal numbers differ (e.g. SIGBUS is 7 on
x86/ARM but 10 on MIPS/SPARC). Core-dump and fatal signals
(KILL, ILL, ABRT, BUS, FPE, SEGV, TRAP, SYS) fail the test.
- Higher exit codes (200+) are perf's own negative-errno returns
(e.g. -EINVAL = 234) and are expected.
This exercises the bounds checking, minimum-size validation, and error
propagation added by the preceding patches in this series.
Testing it:
root@number:~# perf test truncat
84: Test that perf report handles truncated perf.data gracefully (no crash, no segfault — clean error exit).: Ok
root@number:~# perf test -vv truncat
84: Test that perf report handles truncated perf.data gracefully (no crash, no segfault — clean error exit).:
--- start ---
test child forked, pid 62890
---- end(0) ----
84: Test that perf report handles truncated perf.data gracefully (no crash, no segfault — clean error exit).: Ok
root@number:~#
Changes in v2:
- Add SIGKILL to the list of fatal signals so OOM kills from
resource exhaustion bugs are detected (Reported-by: sashiko-bot@kernel.org)
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6-1m
[ Fixed the SPDX on the line where 'perf test' expects the test description, reviewed by Ian Rogers ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new shell test `stat_metrics_cgrp.sh` to verify metric reporting
with `--for-each-cgroup`, both with and without `--bpf-counters`.
The test:
- Checks if system-wide monitoring is supported (skips if not).
- Finds cgroups to test.
- Runs `perf stat` with `insn_per_cycle` metric and verifies that the
metric is reported for each cgroup.
- Dynamically pairs and verifies instructions and cycles counts to
avoid false failures on idle cgroups.
- Tests both standard mode and BPF counters mode (if supported).
Assisted-by: Antigravity:gemini-3-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Svilen Kanev <skanev@google.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a new test case `test_stat_delay` to `stat.sh` to verify that
`duration_time` correctly excludes the delay period when using the
delay option (-D).
The test runs `perf stat -D 1000 -e duration_time sleep 2` and
verifies that `duration_time` is ~1s (excluding the 1s delay), not
~2s.
Assisted-by: Antigravity:gemini-3-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Francesco Nigro <nigro.fra@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
IBS on pre-Zen6 platforms lacked a hardware privilege filter, so the
kernel enabled swfilt=1. Zen6 and newer platforms provides privilege
filtering via the RIP[63] bit, making swfilt redundant. Skip the perf
unit test that assumes IBS has no hardware-assisted privilege filter
on Zen6 and newer platforms.
swfilt is ignored by kernel on platforms that support RIP[63] bit filter
i.e. all amd-ibs-swfilt.sh tests will test hardware assisted privilege
filter.
Without the patch on Zen6:
# sudo ./perf test -vv 77
77: AMD IBS software filtering:
--- start ---
test child forked, pid 30813
check availability of IBS swfilt
run perf record with modifier and swfilt
[FAIL] IBS PMU should not accept exclude_kernel
---- end(-1) ----
77: AMD IBS software filtering : FAILED!
With the patch:
# ./perf test -vv 77
77: AMD IBS software filtering:
--- start ---
test child forked, pid 30903
check availability of IBS swfilt
run perf record with modifier and swfilt
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.000 MB /dev/null ]
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.000 MB /dev/null ]
[ perf record: Woken up 3 times to write data ]
[ perf record: Captured and wrote 0.000 MB /dev/null ]
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB /dev/null ]
check number of samples with swfilt
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.051 MB - ]
[ perf record: Woken up 4 times to write data ]
[ perf record: Captured and wrote 0.063 MB - ]
---- end(0) ----
77: AMD IBS software filtering : Ok
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ananth Narayan <ananth.narayan@amd.com>
Cc: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Manali Shukla <manali.shukla@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Santosh Shukla <santosh.shukla@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The trace summary test calls /bin/true and filters for open, read and
close events. These events are coming from shared library loads.
On a musl system, the loader and libc may point to the same file. true
needs only libc, no further shared libraries are loaded at startup. The
test fails since no open, read and close events are captured.
root@host:~# ldd /bin/true
/lib/ld-musl-riscv64.so.1 (0x3fb8882000)
libc.so => /lib/ld-musl-riscv64.so.1 (0x3fb8882000)
root@host:~# file /lib/ld-musl-riscv64.so.1
/lib/ld-musl-riscv64.so.1: symbolic link to /usr/lib/libc.so
root@host:~# strace -f /bin/true
execve("/bin/true", ["/bin/true", ...], ... /* 18 vars */) = 1
set_tid_address(0x3fa1f7bf70) = 330
mprotect(0x2ad6b8e000, 12288, PROT_READ) = 0
exit_group(0) = ?
+++ exited with 0 +++
Run "cat /dev/null" instead of "true". This creates the required events
regardless of the C library and it works for cat from busybox or from
coreutils.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The perf ftrace test case runs:
perf ftrace profile --graph-opts depth=5 sleep 0.1
and checks that the output contains a *clock_nanosleep function with a
count of 1.
This fails on a risc-v system that uses musl as its C library. musl's
nanosleep syscall wrapper uses either the nanosleep or the
clock_nanosleep syscall.
Filter for sys_*nanosleep to allow both syscalls.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When filtering branch stack samples on user events they sample in user
land but may have come from the kernel. Aarch64 avoids leaking the
kernel address for kaslr reasons but other platforms, for now,
don't. Be more permissive in allowing kernel addresses in the source
of user branch stacks.
When filtering branch stack samples on kernel events they sample in
kernel land but may have come from user land. Avoid the target being a
user address but allow the source to be in user land. Aarch64 may not
leak the user land addresses (making them 0) but other platforms
do. As the kernel address sampling implies privelege, just allow this.
Increase the duration of the system call sampling test to make the
likelihood of sampling a system call higher (increased from 1000 to
8000 loops - a number found through experimentation on an Intel
Tigerlake laptop), also make the period of the event a prime number.
Put unneeded perf record output into a temporary file so that the test
output isn't cluttered. More clearly state which test is running and
the pass, fail or skipped result of the test.
These changes make the test on an Intel tigerlake laptop reliably pass
rather than reliably fail.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
When adding a probe for libc's inet_pton, perf probe may create multiple
probe points (e.g., due to inlining or multiple symbol resolutions),
resulting in multiple identical event names being output (e.g.,
`probe_libc:inet_pton_1`).
The script previously used a brittle pipeline (`tail -n +2 | head -n -5`)
and an awk script to extract the event name. When multiple probes were
added, awk would output the event name multiple times, which expanded
to multiple words in bash. This broke the subsequent `perf record` and
`perf probe -d` commands, causing the test to fail with:
`Error: another command except --add is set.`
Fix this by removing the brittle `tail/head` commands and appending
`| head -n 1` to the awk extraction. This ensures that only a single,
unique event name is captured, regardless of how many probe points
are created.
Additionally, the test artificially limited the backtrace size via
`max-stack=4` and did not specify dwarf call graphs for non-s390x
architectures. In newer libc versions where `inet_pton` is nested
deeper or compiled without frame pointers, `perf script` failed to resolve
the backtrace up to `/bin/ping`. Fix this by explicitly collecting
dwarf call-graphs for all architectures and increasing `max-stack` to 8.
Assisted-by: Gemini:gemini-3.1-pro-preview
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Running both tests cases 126 128 together causes the first test case
126 to fail:
# for i in $(seq 3); do ./perf test 'perf trace BTF general tests' \
'perf trace record and replay'; done
126: perf trace BTF general tests : FAILED!
128: perf trace record and replay : Ok
126: perf trace BTF general tests : FAILED!
128: perf trace record and replay : Ok
126: perf trace BTF general tests : FAILED!
128: perf trace record and replay : Ok
#
Test case 126 fails because test case 128 runs concurrently as can
be observed using a ps -ef | grep perf output list on a different
window. Both do a perf trace command concurrently.
Make test case 'perf trace BTF general tests' exclusive.
Output after:
# for i in $(seq 3); do ./perf test 'perf trace BTF general tests' \
'perf trace record and replay'; done
127: perf trace BTF general tests : Ok
155: perf trace record and replay : Ok
127: perf trace BTF general tests : Ok
155: perf trace record and replay : Ok
127: perf trace BTF general tests : Ok
155: perf trace record and replay : Ok
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-by: Howard Chu <howardchu95@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Running perf sched stats requires root and it fails to open the
schedstat file for regular users. Let's skip the test.
$ perf sched stats true
Failed to open /proc/sys/kernel/sched_schedstats
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Writing to the perf.data file can fail in various contexts such as
continual test. Other tests write to a mktemp-ed file, make the "perf
sched stats tests" follow this convention.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Add basic kwork coverage tests for record, report, latency, timehist
and top.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Test case 'perf data type profiling tests' fails on s390 with this
error:
# ./perf mem record -- ./perf test -w code_with_type
failed: no PMU supports the memory events
# echo $?
255
#
because s390 does not support memory events at all. According to the
man page, perf annotate --code-with-type only works with memory
instructions only. As command 'perf mem record ...' is not supported
on s390, skip this test for s390.
Output before:
# ./perf test 'perf data type profiling tests'
77: perf data type profiling tests : FAILED!
Output after:
# ./perf test 'perf data type profiling tests'
77: perf data type profiling tests : Skip
Fixes: f60a5c22967b8 ("perf tests: Test annotate with data type profiling and rust")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Dmitrii Dolgov <9erthalion6@gmail.com>
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Suggested-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The test constantly fails on my Intel hybrid machine. The issue was it
has two events in the output even if I only gave it one event.
$ perf stat -e instructions -- perf test -w sqrtloop
Performance counter stats for 'perf test -w sqrtloop':
910,856,421 cpu_atom/instructions/ (28.05%)
14,852,865,997 cpu_core/instructions/ (96.79%)
1.014313341 seconds time elapsed
1.004114000 seconds user
0.008174000 seconds sys
Let's modify the awk script to add the values for each line and print
the total. The variable 'i' has a number of input lines that have valid
output and variable 'c' has the sum of actual counter values. That way
it should work on any platforms.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Writing to the test output files in the current working directory can
fail in various contexts such as continual test. Other tests write to
a mktemp-ed file, make the "perf script task-analyszer tests" follow
this convention too. Currently this isn't possible for the perf.data
file due to a lack of perf script support, add a variable for when
this support is available.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The typedef creates an issue where the struct or the typedef may
appear in the output and cause the "perf data type profiling tests" to
fail. Let's remove the typedef to keep the test passing.
Fixes: 335047109d7d ("perf tests: Test annotate with data type profiling and C")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Basic coverage of python script support from `perf script`.
Committer testing:
$ perf test 'perf script python'
107: perf script python tests : Ok
$ perf test -vv 'perf script python'
107: perf script python tests:
--- start ---
test child forked, pid 595537
Testing event: sched:sched_switch
perf script python test [Skipped: failed to record sched:sched_switch]
Testing event: task-clock
Generating python script...
generated Python script: /tmp/__perf_test_script.J4rWj.py
Executing python script...
perf script python test [Success: task-clock triggered param_dict]
---- end(0) ----
107: perf script python tests : Ok
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Basic coverage of perl script support from `perf script`. This is
disabled by default and so the test will most normally skip.
Committer testing:
$ perf test 'perf script perl'
106: perf script perl tests : Skip
$ perf test -vv 'perf script perl'
106: perf script perl tests:
--- start ---
test child forked, pid 578323
perf script perl test [Skipped: no libperl support]
---- end(-2) ----
106: perf script perl tests : Skip
$ perf check feature libperl
libperl: [ OFF ] # HAVE_LIBPERL_SUPPORT ( tip: Deprecated, use LIBPERL=1 and install perl-ExtUtils-Embed/libperl-dev to build with it )
$
Install perl-ExtUtils-Embed, build with LIBPERL=1, rebuild:
$ perf check feature libperl
libperl: [ on ] # HAVE_LIBPERL_SUPPORT
$ perf test 'perf script perl'
106: perf script perl tests : Ok
$ perf test -vv 'perf script perl'
106: perf script perl tests:
--- start ---
test child forked, pid 588206
Testing event: sched:sched_switch
perf script perl test [Skipped: failed to record sched:sched_switch]
Testing event: task-clock
Generating perl script...
generated Perl script: /tmp/__perf_test_script.RpMn5.pl
Executing perl script...
perf script perl test [Success: task-clock triggered $VAR1]
---- end(0) ----
106: perf script perl tests : Ok
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Cc: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If babeltrace is detected check that --to-ctf functions with a data
file and in pipe mode.
Committer testing:
$ perf test 'perf data convert --to-ctf'
124: 'perf data convert --to-ctf' command test : Ok
$ perf test -vv 'perf data convert --to-ctf'
124: 'perf data convert --to-ctf' command test:
--- start ---
test child forked, pid 556008
libbabeltrace: [ on ] # HAVE_LIBBABELTRACE_SUPPORT
Testing Perf Data Conversion Command to CTF (File input)
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.021 MB /tmp/__perf_test.perf.data.9TxzZ (115 samples) ]
[ perf data convert: Converted '/tmp/__perf_test.perf.data.9TxzZ' into CTF data '/tmp/__perf_test.ctf.f5EkS' ]
[ perf data convert: Converted and wrote 0.012 MB (115 samples) ]
Perf Data Converter Command to CTF (File input) [SUCCESS]
Testing Perf Data Conversion Command to CTF (Pipe mode)
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.047 MB - ]
Failed to setup all events.
[ perf data convert: Converted '/tmp/__perf_test.perf.data.9TxzZ' into CTF data '/tmp/__perf_test.ctf.f5EkS' ]
[ perf data convert: Converted and wrote 0.000 MB (0 samples) ]
Perf Data Converter Command to CTF (Pipe mode) [SUCCESS]
Unexpected signal in main
---- end(0) ----
124: 'perf data convert --to-ctf' command test : Ok
$
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Derek Foreman <derek.foreman@collabora.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add pipe mode test for json data conversion. Tidy up exit and cleanup
code.
Committer testing:
$ perf test 'perf data convert --to-json'
124: 'perf data convert --to-json' command test : Ok
$ perf test -vv 'perf data convert --to-json'
124: 'perf data convert --to-json' command test:
--- start ---
test child forked, pid 548738
Testing Perf Data Conversion Command to JSON
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB /tmp/__perf_test.perf.data.krxvl (104 samples) ]
[ perf data convert: Converted '/tmp/__perf_test.perf.data.krxvl' into JSON data '/tmp/__perf_test.output.json.0z60p' ]
[ perf data convert: Converted and wrote 0.075 MB (104 samples) ]
Perf Data Converter Command to JSON [SUCCESS]
Validating Perf Data Converted JSON file
The file contains valid JSON format [SUCCESS]
Testing Perf Data Conversion Command to JSON (Pipe mode)
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.046 MB - ]
[ perf data convert: Converted '-' into JSON data '/tmp/__perf_test.o |
