| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The libopenssl is required by bpftool which is needed to generate BPF
skeleton. Disable it by setting BUILD_BPF_SKEL to 0 otherwise it'll see
build errors like below:
CC /build/util/bpf_skel/.tmp/bootstrap/sign.o
sign.c:16:10: fatal error: openssl/opensslv.h: No such file or directory
16 | #include <openssl/opensslv.h>
| ^~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[3]: *** [Makefile:256: /build/util/bpf_skel/.tmp/bootstrap/sign.o] Error 1
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [Makefile.perf:1211: /build/util/bpf_skel/.tmp/bootstrap/bpftool] Error 2
make[1]: *** [Makefile.perf:287: sub-make] Error 2
make: *** [Makefile:76: all] Error 2
Now it'll skip the build with the following message:
Makefile.config:729: Warning: Disabled BPF skeletons as libopenssl is required
Closes: https://lore.kernel.org/r/aP7uq6eVieG8v_v4@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Perf event/metric description:
Unify all event and metric descriptions in JSON format. Now event
parsing and handling is greatly simplified by that.
From users point of view, perf list will provide richer information
about hardware events like the following.
$ perf list hw
List of pre-defined events (to be used in -e or -M):
legacy hardware:
branch-instructions
[Retired branch instructions [This event is an alias of branches]. Unit: cpu]
branch-misses
[Mispredicted branch instructions. Unit: cpu]
branches
[Retired branch instructions [This event is an alias of branch-instructions]. Unit: cpu]
bus-cycles
[Bus cycles,which can be different from total cycles. Unit: cpu]
cache-misses
[Cache misses. Usually this indicates Last Level Cache misses; this is intended to be used in conjunction with the
PERF_COUNT_HW_CACHE_REFERENCES event to calculate cache miss rates. Unit: cpu]
cache-references
[Cache accesses. Usually this indicates Last Level Cache accesses but this may vary depending on your CPU. This may include
prefetches and coherency messages; again this depends on the design of your CPU. Unit: cpu]
cpu-cycles
[Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cycles]. Unit: cpu]
cycles
[Total cycles. Be wary of what happens during CPU frequency scaling [This event is an alias of cpu-cycles]. Unit: cpu]
instructions
[Retired instructions. Be careful,these can be affected by various issues,most notably hardware interrupt counts. Unit: cpu]
ref-cycles
[Total cycles; not affected by CPU frequency scaling. Unit: cpu]
But most notable changes would be in the perf stat. On the right side,
the default metrics are better named and aligned. :)
$ perf stat -- perf test -w noploop
Performance counter stats for 'perf test -w noploop':
11 context-switches # 10.8 cs/sec cs_per_second
0 cpu-migrations # 0.0 migrations/sec migrations_per_second
3,612 page-faults # 3532.5 faults/sec page_faults_per_second
1,022.51 msec task-clock # 1.0 CPUs CPUs_utilized
110,466 branch-misses # 0.0 % branch_miss_rate (88.66%)
6,934,452,104 branches # 6781.8 M/sec branch_frequency (88.66%)
4,657,032,590 cpu-cycles # 4.6 GHz cycles_frequency (88.65%)
27,755,874,218 instructions # 6.0 instructions insn_per_cycle (89.03%)
TopdownL1 # 0.3 % tma_backend_bound
# 9.3 % tma_bad_speculation (89.05%)
# 9.7 % tma_frontend_bound (77.86%)
# 80.7 % tma_retiring (88.81%)
1.025318171 seconds time elapsed
1.013248000 seconds user
0.012014000 seconds sys
Deferred unwinding support:
With the kernel support (commit c69993ecdd4d: "perf: Support deferred
user unwind"), perf can use deferred callchains for userspace stack
trace with frame pointers like below:
$ perf record --call-graph fp,defer ...
This will be transparent to users when it comes to other commands like
perf report and perf script. They will merge the deferred callchains
to the previous samples as if they were collected together.
ARM SPE updates
- Extensive enhancements to support various kinds of memory
operations including GCS, MTE allocation tags, memcpy/memset,
register access, and SIMD operations.
- Add inverted data source filter (inv_data_src_filter) support to
exclude certain data sources.
- Improve documentation.
Vendor event updates:
- Intel: Updated event files for Sierra Forest, Panther Lake, Meteor
Lake, Lunar Lake, Granite Rapids, and others.
- Arm64: Added metrics for i.MX94 DDR PMU and Cortex-A720AE
definitions.
- RISC-V: Added JSON support for T-HEAD C920V2.
Misc:
- Improve pointer tracking in data type profiling. It'd give better
output when the variable is using container_of() to convert type.
- Annotation support for perf c2c report in TUI. Press 'a' key to
enter annotation view from cacheline browser window. This will show
which instruction is causing the cacheline contention.
- Lots of fixes and test coverage improvements!"
* tag 'perf-tools-for-v6.19-2025-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (214 commits)
libperf: Use 'extern' in LIBPERF_API visibility macro
perf stat: Improve handling of termination by signal
perf tests stat: Add test for error for an offline CPU
perf stat: When no events, don't report an error if there is none
perf tests stat: Add "--null" coverage
perf cpumap: Add "any" CPU handling to cpu_map__snprint_mask
libperf cpumap: Fix perf_cpu_map__max for an empty/NULL map
perf stat: Allow no events to open if this is a "--null" run
perf test kvm: Add some basic perf kvm test coverage
perf tests evlist: Add basic evlist test
perf tests script dlfilter: Add a dlfilter test
perf tests kallsyms: Add basic kallsyms test
perf tests timechart: Add a perf timechart test
perf tests top: Add basic perf top coverage test
perf tests buildid: Add purge and remove testing
perf tests c2c: Add a basic c2c
perf c2c: Clean up some defensive gets and make asan clean
perf jitdump: Fix missed dso__put
perf mem-events: Don't leak online CPU map
perf hist: In init, ensure mem_info is put on error paths
...
|
|
The NO_AUXTRACE build option was used when the __get_cpuid feature
test failed or if it was provided on the command line. The option no
longer avoids a dependency on a library and so having the option is
just adding complexity to the code base. Remove the option
CONFIG_AUXTRACE from Build files and HAVE_AUXTRACE_SUPPORT by assuming
it is always defined.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
The intel-pt code dependent on __get_cpuid is no longer present so
remove the feature test in the Makefile.config.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
not available
This is one more remnant of the BUILD_NONDISTRO series to make building
with binutils-devel opt-in due to license incompatibility.
In this case just the references at link time were still in place, which
make building the test-all.bin file fail, which wasn't detected before
probably because the last test was done with binutils-devel available,
doh.
Now:
$ rpm -q binutils-devel
package binutils-devel is not installed
$ file /tmp/build/perf-tools/feature/test-all.bin
/tmp/build/perf-tools/feature/test-all.bin: ELF 64-bit LSB executable, x86-64, version 1 (SYSV),
dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2,
BuildID[sha1]=4b5388a346b51f1b993f0b0dbd49f4570769b03c, for GNU/Linux 3.2.0, not stripped
$
Fixes: 970ae86307718c34 ("perf build: The bfd features are opt-in, stop testing for them by default")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add support for building perf with clang. For cross compilation, the
Makefile dynamically selects target flag for corresponding arch.
This patch has been verified on x86_64 machine with Ubuntu distro, it
can build successfully for native target, and for cross building Arm64
and s390.
Example: native build on x86_64 / Ubuntu machine:
$ HOSTCC=clang CC=clang CXX=clang++ make -C tools/perf
Example: cross building s390 target on x86_64 / Ubuntu machine:
# Install x390x cross toolchain and headers
$ sudo apt-get install gcc-s390x-linux-gnu g++-s390x-linux-gnu \
libc6-dev-s390x-cross linux-libc-dev-s390x-cross
# Build with clang
$ HOSTCC=clang CC=clang CXX=clang++ \
ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- \
make -C tools/perf NO_LIBELF=1 NO_LIBTRACEEVENT=1 NO_LIBPYTHON=1
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-8-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The feature check guarded the -DHAVE_LIBBPF_STRINGS_SUPPORT is
unnecessary as it is sufficient and easier to use the
LIBBPF_CURRENT_VERSION_GEQ macro.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Blake Jones <blakejones@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The disasm feature tests feature-disassembler-four-args and
feature-disassembler-init-styled link against libopcodes part of
binutils which is license incompatible (GPLv3) with perf. Moving these
tests out of the common config will help improve build time.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Added in commit cbefd24f0aee3a5d ("tools build: Add test to check if
slang.h is in /usr/include/slang/") this feature was to fix build
support on now unsupported versions of RHEL 5 and 6. As 6 years has
passed let's remove the workaround.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
get_current_dir_name is a GNU extension not supported on, for example,
Android. There is only one use of it so let's just switch to getcwd to
avoid build and other complexity.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Move symbolization and srcline libbfd dependencies to a separate
libbfd.c. This mirrors moving llvm and capstone code. While this code
is deprecated as it is part of BUILD_NONDISTRO license incompatible
code, moving the code to its own file minimizes disruption in the main
files.
disasm_bpf.c is moved to libbfd.c also except for
symbol__disassemble_bpf_image which is currently more of a placeholder
function rather than something that provides disassembly support.
demangle-cxx.cpp code isn't migrated as it is very limited.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.ibm.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Collin Funk <collin.funk1@gmail.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dr. David Alan Gilbert <linux@treblig.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Stephen Brennan <stephen.s.brennan@oracle.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
libtracefs isn't used by perf but not having it installed causes build
warnings.
Given the library isn't used, there is no need for the configuration or
warnings so remove.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250929170600.59000-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
If libperl is installed then the perf tool build will build against
it. There appears to be limited interest in the scripting support for
perl so let's make it opt-in and deprecate it.
With this patch applied you need to add LIBPERL=1 to get libperl
support in perf - there is no warning if libperl is missing, but
building will fail if libperl is missing and the build has LIBPERL=1.
The perf version output is changed to:
```
$ perf version --build-options
perf version 6.17.rc3.g8eca69269947
aio: [ on ] # HAVE_AIO_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
bpf_skeletons: [ on ] # HAVE_BPF_SKEL
debuginfod: [ on ] # HAVE_DEBUGINFOD_SUPPORT
dwarf: [ on ] # HAVE_LIBDW_SUPPORT
dwarf_getlocations: [ on ] # HAVE_LIBDW_SUPPORT
dwarf-unwind: [ on ] # HAVE_DWARF_UNWIND_SUPPORT
auxtrace: [ on ] # HAVE_AUXTRACE_SUPPORT
libbfd: [ OFF ] # HAVE_LIBBFD_SUPPORT ( tip: Deprecated, license incompatibility, use BUILD_NONDISTRO=1 and install binutils-dev[el] )
libbpf-strings: [ on ] # HAVE_LIBBPF_STRINGS_SUPPORT
libcapstone: [ on ] # HAVE_LIBCAPSTONE_SUPPORT
libdw-dwarf-unwind: [ on ] # HAVE_LIBDW_SUPPORT
libelf: [ on ] # HAVE_LIBELF_SUPPORT
libnuma: [ on ] # HAVE_LIBNUMA_SUPPORT
libopencsd: [ OFF ] # HAVE_CSTRACE_SUPPORT
libperl: [ OFF ] # HAVE_LIBPERL_SUPPORT ( tip:
Deprecated, use LIBPERL=1 and install libperl-dev to build with it )
libpfm4: [ on ] # HAVE_LIBPFM
libpython: [ on ] # HAVE_LIBPYTHON_SUPPORT
libslang: [ on ] # HAVE_SLANG_SUPPORT
libtraceevent: [ on ] # HAVE_LIBTRACEEVENT
libunwind: [ OFF ] # HAVE_LIBUNWIND_SUPPORT ( tip:
Deprecated, use LIBUNWIND=1 and install libunwind-dev[el] to build
with it )
lzma: [ on ] # HAVE_LZMA_SUPPORT
numa_num_possible_cpus: [ on ] # HAVE_LIBNUMA_SUPPORT
zlib: [ on ] # HAVE_ZLIB_SUPPORT
zstd: [ on ] # HAVE_ZSTD_SUPPORT
```
i.e. there is a tip saying about deprecation and how to get support
back.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <qmo@kernel.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Yuzhuo Jing <yuzhuo@google.com>
Link: https://lore.kernel.org/lkml/aMrk03gigBlGcYLK@x1/
Link: https://lore.kernel.org/lkml/CAP-5=fVX+bLBRJCiziDi_hBySgv2NFtDoghtpheSSxVAvvETGw@mail.gmail.com
[ Keep the pre-existing perl-ExtUtils-Embed hint for Fedora/RHEL systems ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Remove all occurrence of libcrypto in the build system.
Signed-off-by: Yuzhuo Jing <yuzhuo@google.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250625202311.23244-5-ebiggers@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
perf pulls in code from kernel headers that assumes it is being built
with -fno-strict-aliasing, namely put_unaligned_*() from
<linux/unaligned.h> which write the data using packed structs that lack
the may_alias attribute. Enable -fno-strict-aliasing to prevent
miscompilations in sha1.c which would otherwise occur due to this issue.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250625202311.23244-2-ebiggers@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
These are leftovers noticed while updating a build container.
We don't need those so that test-all.c can build and thus speed up the
feature detection.
Test for those features only if the user asks for BUILD_NONDISTRO=1 to
build with libbfd.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250620212435.93846-4-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Just to follow the pattern with other devel packages.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250620212435.93846-3-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Just tidying up the suggestion to pick the latest and not some specific
version.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250620212435.93846-2-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This creates a config option that detects libbpf's ability to display
character arrays as strings, which was just added to the BPF tree
(https://git.kernel.org/bpf/bpf-next/c/87c9c79a02b4).
To test this change, I built perf (from later in this patch set) with:
- static libbpf (default, using source from kernel tree)
- dynamic libbpf (LIBBPF_DYNAMIC=1 LIBBPF_INCLUDE=/usr/local/include)
For both the static and dynamic versions, I used headers with and without
the ".emit_strings" option.
I verified that of the four resulting binaries, the two with
".emit_strings" would successfully record BPF_METADATA events, and the two
without wouldn't. All four binaries would successfully display
BPF_METADATA events, because the relevant bit of libbpf code is only used
during "perf record".
Signed-off-by: Blake Jones <blakejones@google.com>
Link: https://lore.kernel.org/r/20250612194939.162730-2-blakejones@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up fixes from the latest perf-tools pull request from Namhyung
and get perf-tools-next in line with thinngs in other areas it uses,
like tools/lib/bpf, etc.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When libperf is built alone in-source, $(OUTPUT) isn't set. This causes
the generated uapi path to resolve to '/../arch' which results in a
permissions error:
mkdir: cannot create directory '/../arch': Permission denied
Fix it by removing the preceding '/..' which means that it gets
generated either in the tools/lib/perf part of the tree or the OUTPUT
folder. Some other rules that rely on OUTPUT further refine this
conditionally depending on whether it's an in-source or out-of-source
build, but I don't think we need the extra complexity here. And this
rule is slightly different to others because the header is needed by
both libperf and Perf. This is further complicated by the fact that Perf
always passes O=... to libperf even for in source builds, meaning that
OUTPUT isn't set consistently between projects.
Because we're no longer going one level up to try to generate the file
in the tools/ folder, Perf's include rule needs to descend into libperf.
Also fix the clean rule while we're here.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/linux-perf-users/7703f88e-ccb7-4c98-9da4-8aad224e780f@leemhuis.info/
Fixes: bfb713ea53c7 ("perf tools: Fix arm64 build by generating unistd_64.h")
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/20250429-james-perf-fix-libperf-in-source-build-v1-1-a1a827ac15e5@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Since pulling in the kernel changes in commit 22f72088ffe6 ("tools
headers: Update the syscall table with the kernel sources"), arm64 is
no longer using a generic syscall header and generates one from the
syscall table. Therefore we must also generate the syscall header for
arm64 before building Perf.
Add it as a dependency to libperf which uses one syscall number. Perf
uses more, but as libperf is a dependency of Perf it will be generated
for both.
Future platforms that need this will have to add their own syscall-y
targets in libperf manually. Unfortunately the arch specific files that
do this (e.g. arch/arm64/include/asm/Kbuild) can't easily be imported
into the Perf build. But Perf only needs a subset of the generated files
anyway, so redefining them is probably the correct thing to do.
Fixes: 22f72088ffe6 ("tools headers: Update the syscall table with the kernel sources")
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20250417-james-perf-fix-gen-syscall-v1-1-1d268c923901@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
While working on 'perf version --build-options' I noticed that:
$ perf version --build-options
perf version 6.15.rc1.g312a07a00d31
aio: [ on ] # HAVE_AIO_SUPPORT
bpf: [ on ] # HAVE_LIBBPF_SUPPORT
bpf_skeletons: [ on ] # HAVE_BPF_SKEL
debuginfod: [ OFF ] # HAVE_DEBUGINFOD_SUPPORT
<SNIP>
And looking at tools/perf/Makefile.config I also noticed that it is not
opt-in, meaning we will attempt to build with it in all normal cases.
So add the usual warning at build time to let the user know that
something recommended is missing, now we see:
Makefile.config:563: No elfutils/debuginfod.h found, no debuginfo server support, please install elfutils-debuginfod-client-devel or equivalent
And after following the recommendation:
$ perf check feature debuginfod
debuginfod: [ on ] # HAVE_DEBUGINFOD_SUPPORT
$ ldd ~/bin/perf | grep debuginfo
libdebuginfod.so.1 => /lib64/libdebuginfod.so.1 (0x00007fee5cf5f000)
$
With this feature on several perf tools will fetch what is needed and
not require all the contents of the debuginfo packages, for instance:
# rpm -qa | grep kernel-debuginfo
# pahole --running_kernel_vmlinux
pahole: couldn't find a vmlinux that matches the running kernel
HINT: Maybe you're inside a container or missing a debuginfo package?
#
# perf trace -e open* perf probe --vars icmp_rcv
0.000 ( 0.005 ms): perf/97391 openat(dfd: CWD, filename: "/etc/ld.so.cache", flags: RDONLY|CLOEXEC) = 3
0.014 ( 0.004 ms): perf/97391 openat(dfd: CWD, filename: "/lib64/libm.so.6", flags: RDONLY|CLOEXEC) = 3
<SNIP>
32130.100 ( 0.008 ms): perf/97391 openat(dfd: CWD, filename: "/root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo") = 3
<SNIP>
Available variables at icmp_rcv
@<icmp_rcv+0>
struct sk_buff* skb
<SNIP>
#
# pahole --running_kernel_vmlinux
/root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
# file /root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
/root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=aa3c82b4a13f9c0e0301bebb20fe958c4db6f362, with debug_info, not stripped
# ls -la /root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
-r--------. 1 root root 475401512 Mar 27 21:00 /root/.cache/debuginfod_client/aa3c82b4a13f9c0e0301bebb20fe958c4db6f362/debuginfo
#
Then, cached:
# perf stat --null perf probe --vars icmp_rcv
Available variables at icmp_rcv
@<icmp_rcv+0>
struct sk_buff* skb
Performance counter stats for 'perf probe --vars icmp_rcv':
0.671389041 seconds time elapsed
0.519176000 seconds user
0.150860000 seconds sys
Fixes: c7a14fdcb3fa7736 ("perf build-ids: Fall back to debuginfod query if debuginfo not found")
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Howard Chu <howardchu95@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Link: https://lore.kernel.org/r/Z_dkNDj9EPFwPqq1@gmail.com
[ Folded patch from Ingo to have the debian/ubuntu devel package added build warning message ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The tools/build/feature/test-all.c file tries to detect the expected,
most common set of libraries/features we expect to have available to
build perf with.
At some point libunwind was deemed not to be part of that set of
libries, but the patches making it to be opt-in ended up forgetting some
details, fix one more.
Testing it:
$ rm -rf /tmp/build/$(basename $PWD)/ ; mkdir -p /tmp/build/$(basename $PWD)/
$ rpm -q libunwind-devel
libunwind-devel-1.8.0-3.fc40.x86_64
$ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
... libunwind: [ on ]
CC /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
CC /tmp/build/perf-tools-next/arch/x86/util/unwind-libunwind.o
CC /tmp/build/perf-tools-next/util/arm64-frame-pointer-unwind-support.o
CC /tmp/build/perf-tools-next/tests/dwarf-unwind.o
CC /tmp/build/perf-tools-next/util/unwind-libunwind-local.o
CC /tmp/build/perf-tools-next/util/unwind-libunwind.o
libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f615a549000)
libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f615a52f000)
$ sudo rpm -e libunwind-devel
$ rm -rf /tmp/build/$(basename $PWD)/ ; mkdir -p /tmp/build/$(basename $PWD)/
$ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
Makefile.config:653: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR
... libunwind: [ OFF ]
CC /tmp/build/perf-tools-next/arch/x86/tests/dwarf-unwind.o
CC /tmp/build/perf-tools-next/arch/x86/util/unwind-libdw.o
CC /tmp/build/perf-tools-next/util/arm64-frame-pointer-unwind-support.o
CC /tmp/build/perf-tools-next/tests/dwarf-unwind.o
CC /tmp/build/perf-tools-next/util/unwind-libdw.o
$
Should be in a separate patch, but tired now, so also adding a message
about the need to use LIBUNWIND=1 in the output when its not available,
so done here as well.
So, now when the devel files are not available we get:
$ make -k LIBUNWIND=1 CORESIGHT=1 O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin |& grep unwind && ldd ~/bin/perf | grep unwind
Makefile.config:653: No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR and set LIBUNWIND=1 in the make command line as it is opt-in now
... libunwind: [ OFF ]
$
Fixes: 13e17c9ff49119aa ("perf build: Make libunwind opt-in rather than opt-out")
Reported-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/Z_AnsW9oJzFbhIFC@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When enabling the libperl feature the build uses perl's build flags
(ccopts) but filters out various flags, e.g. for LTO.
While this is conceptually correct, it is insufficient in practice,
since only "-flto=auto" is filtered out. When perl itself is built with
"-flto" this can cause parts of perf being built with LTO and others
without, giving exciting build errors like e.g.:
../tools/perf/pmu-events/pmu-events.c:72851:(.text+0xb79): undefined
reference to `strcmp_cpuid_str' collect2: error: ld returned 1 exit status
Fix this by filtering all matching flag values of -flto{=n,auto,..}.
Signed-off-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Link: https://lore.kernel.org/r/20250321082038.27901-2-holger@applied-asynchrony.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
This is also used in util/comm.c now, so instead of selectively doing
the feature test, always do it. If it's ever used anywhere else it's
less likely to cause another build failure.
This doesn't remove the need to manually include libc_compat.h, and
missing that will still cause an error for glibc < 2.26. There isn't a
way to fix that without poisoning reallocarray like libbpf did, but that
has other downsides like making memory debugging tools less useful. So
for Perf keep it like this and we'll have to fix up any missed includes.
Fixes the following build error:
util/comm.c:152:31: error: implicit declaration of function
'reallocarray' [-Wimplicit-function-declaration]
152 | tmp = reallocarray(comm_strs->strs,
| ^~~~~~~~~~~~
Fixes: 13ca628716c6 ("perf comm: Add reference count checking to 'struct comm_str'")
Reported-by: Ali Utku Selen <ali.utku.selen@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250129154405.777533-1-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
All architectures now support HAVE_SYSCALL_TABLE_SUPPORT, so the flag is
no longer needed. With the removal of the flag, the related
GENERIC_SYSCALL_TABLE can also be removed.
libaudit was only used as a fallback for when HAVE_SYSCALL_TABLE_SUPPORT
was not defined, so libaudit is also no longer needed for any
architecture.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-16-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the generic scripts to generate headers from the syscall table
instead of the custom ones for s390.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-15-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the generic scripts to generate headers from the syscall table
instead of the custom ones for powerpc.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-14-7543b5293098@rivosinc.com
Link: https://lore.kernel.org/lkml/20250110100505.78d81450@canb.auug.org.au
[ Stephen Rothwell noticed on linux-next that the powerpc build for perf was broken and ...]
Link: https://lore.kernel.org/lkml/20250109-perf_powerpc_spu-v1-1-c097fc43737e@rivosinc.com
[ ... Charlie fixed it up and asked for it to be squashed to avoid breaking bisection. ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the generic scripts to generate headers from the syscall table for
mips.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-13-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
loongarch uses a syscall table, use that in perf instead of using unistd.h.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-12-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
arm64 uses a syscall table, use that in perf instead of using unistd.h.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-11-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the generic scripts to generate headers from the syscall table for
both 32- and 64-bit x86.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-8-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Arc uses the generic syscall table, use that in perf instead of
requiring libaudit.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250108-perf_syscalltbl-v6-2-7543b5293098@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
