| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Ensure that in the ftrace direct call logic, the CPU register state
(with ra = parent return address) is restored to the correct state after
the execution of the custom trampoline function and before returning to
the traced function. Additionally, guarantee the correctness of the jump
logic for jr t0 (traced function address).
Cc: stable@vger.kernel.org
Fixes: 9cdc3b6a299c ("LoongArch: ftrace: Add direct call support")
Reported-by: Youling Tang <tangyouling@kylinos.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Chenghao Duan <duanchenghao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
MMIO backend of PCI Bar always assumes little-endian devices and
will convert to CPU endianness automatically. Remove the u32::from_le
conversion which would cause a bug on big-endian machines.
Cc: stable@vger.kernel.org
Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Marko Turk <mt@markoturk.info>
Fixes: 685376d18e9a ("samples: rust: add Rust PCI sample driver")
Link: https://patch.msgid.link/20251210112503.62925-2-mt@markoturk.info
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "panic: sys_info: Refactor and fix a potential issue" (Andy Shevchenko)
fixes a build issue and does some cleanup in ib/sys_info.c
- "Implement mul_u64_u64_div_u64_roundup()" (David Laight)
enhances the 64-bit math code on behalf of a PWM driver and beefs up
the test module for these library functions
- "scripts/gdb/symbols: make BPF debug info available to GDB" (Ilya Leoshkevich)
makes BPF symbol names, sizes, and line numbers available to the GDB
debugger
- "Enable hung_task and lockup cases to dump system info on demand" (Feng Tang)
adds a sysctl which can be used to cause additional info dumping when
the hung-task and lockup detectors fire
- "lib/base64: add generic encoder/decoder, migrate users" (Kuan-Wei Chiu)
adds a general base64 encoder/decoder to lib/ and migrates several
users away from their private implementations
- "rbree: inline rb_first() and rb_last()" (Eric Dumazet)
makes TCP a little faster
- "liveupdate: Rework KHO for in-kernel users" (Pasha Tatashin)
reworks the KEXEC Handover interfaces in preparation for Live Update
Orchestrator (LUO), and possibly for other future clients
- "kho: simplify state machine and enable dynamic updates" (Pasha Tatashin)
increases the flexibility of KEXEC Handover. Also preparation for LUO
- "Live Update Orchestrator" (Pasha Tatashin)
is a major new feature targeted at cloud environments. Quoting the
cover letter:
This series introduces the Live Update Orchestrator, a kernel
subsystem designed to facilitate live kernel updates using a
kexec-based reboot. This capability is critical for cloud
environments, allowing hypervisors to be updated with minimal
downtime for running virtual machines. LUO achieves this by
preserving the state of selected resources, such as memory,
devices and their dependencies, across the kernel transition.
As a key feature, this series includes support for preserving
memfd file descriptors, which allows critical in-memory data, such
as guest RAM or any other large memory region, to be maintained in
RAM across the kexec reboot.
Mike Rappaport merits a mention here, for his extensive review and
testing work.
- "kexec: reorganize kexec and kdump sysfs" (Sourabh Jain)
moves the kexec and kdump sysfs entries from /sys/kernel/ to
/sys/kernel/kexec/ and adds back-compatibility symlinks which can
hopefully be removed one day
- "kho: fixes for vmalloc restoration" (Mike Rapoport)
fixes a BUG which was being hit during KHO restoration of vmalloc()
regions
* tag 'mm-nonmm-stable-2025-12-06-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (139 commits)
calibrate: update header inclusion
Reinstate "resource: avoid unnecessary lookups in find_next_iomem_res()"
vmcoreinfo: track and log recoverable hardware errors
kho: fix restoring of contiguous ranges of order-0 pages
kho: kho_restore_vmalloc: fix initialization of pages array
MAINTAINERS: TPM DEVICE DRIVER: update the W-tag
init: replace simple_strtoul with kstrtoul to improve lpj_setup
KHO: fix boot failure due to kmemleak access to non-PRESENT pages
Documentation/ABI: new kexec and kdump sysfs interface
Documentation/ABI: mark old kexec sysfs deprecated
kexec: move sysfs entries to /sys/kernel/kexec
test_kho: always print restore status
kho: free chunks using free_page() instead of kfree()
selftests/liveupdate: add kexec test for multiple and empty sessions
selftests/liveupdate: add simple kexec-based selftest for LUO
selftests/liveupdate: add userspace API selftests
docs: add documentation for memfd preservation via LUO
mm: memfd_luo: allow preserving memfd
liveupdate: luo_file: add private argument to store runtime state
mm: shmem: export some functions to internal.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Daniel Gomez:
"Rust module parameter support:
- Add Rust module parameter support, enabling Rust kernel modules to
declare and use module parameters. The rust_minimal sample module
demonstrates this, and the rust null block driver will be the first
to use it in the next cycle. This also adds the Rust module files
under the modules subsystem as agreed between the Rust and modules
maintainers.
Hardening:
- Add compile-time check for embedded NUL characters in MODULE_*()
macros. This module metadata was once used (and maybe still) to
bypass license enforcement (LWN article from 2003):
https://lwn.net/Articles/82305/ [1]
MAINTAINERS:
- Add Aaron Tomlin as reviewer for the Modules subsystem"
* tag 'modules-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
MAINTAINERS: Add myself as reviewer for module support
module: Add compile-time check for embedded NUL characters
media: radio: si470x: Fix DRIVER_AUTHOR macro definition
media: dvb-usb-v2: lmedm04: Fix firmware macro definitions
modules: add rust modules files to MAINTAINERS
rust: samples: add a module parameter to the rust_minimal sample
rust: module: update the module macro with module parameter support
rust: module: use a reference in macros::module::module
rust: introduce module_param module
rust: str: add radix prefixed integer parsing functions
rust: sync: add `SetOnce`
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Arch Topology:
- Move parse_acpi_topology() from arm64 to common code for reuse in
RISC-V
CPU:
- Expose housekeeping CPUs through /sys/devices/system/cpu/housekeeping
- Print a newline (or 0x0A) instead of '(null)' reading
/sys/devices/system/cpu/nohz_full when nohz_full= is not set
debugfs
- Remove (broken) 'no-mount' mode
- Remove redundant access mode checks in debugfs_get_tree() and
debugfs_create_*() functions
Devres:
- Remove unused devm_free_percpu() helper
- Move devm_alloc_percpu() from device.h to devres.h
Firmware Loader:
- Replace simple_strtol() with kstrtoint()
- Do not call cancel_store() when no upload is in progress
kernfs:
- Increase struct super_block::maxbytes to MAX_LFS_FILESIZE
- Fix a missing unwind path in __kernfs_new_node()
Misc:
- Increase the name size in struct auxiliary_device_id to 40
characters
- Replace system_unbound_wq with system_dfl_wq and add WQ_PERCPU to
alloc_workqueue()
Platform:
- Replace ERR_PTR() with IOMEM_ERR_PTR() in platform ioremap
functions
Rust:
- Auxiliary:
- Unregister auxiliary device on parent device unbind
- Move parent() to impl Device; implement device context aware
parent() for Device<Bound>
- Illustrate how to safely obtain a driver's device private data
when calling from an auxiliary driver into the parant device
driver
- DebugFs:
- Implement support for binary large objects
- Device:
- Let probe() return the driver's device private data as pinned
initializer, i.e. impl PinInit<Self, Error>
- Implement safe accessor for a driver's device private data for
Device<Bound> (returned reference can't out-live driver binding
and guarantees the correct private data type)
- Implement AsBusDevice trait, to be used by class device
abstractions to derive the bus device type of the parent device
- DMA:
- Store raw pointer of allocation as NonNull
- Use start_ptr() and start_ptr_mut() to inherit correct
mutability of self
- FS:
- Add file::Offset type alias
- I2C:
- Add abstractions for I2C device / driver infrastructure
- Implement abstractions for manual I2C device registrations
- I/O:
- Use "kernel vertical" style for imports
- Define ResourceSize as resource_size_t
- Move ResourceSize to top-level I/O module
- Add type alias for phys_addr_t
- Implement Rust version of read_poll_timeout_atomic()
- PCI:
- Use "kernel vertical" style for imports
- Move I/O and IRQ infrastructure to separate files
- Add support for PCI interrupt vectors
- Implement TryInto<IrqRequest<'a>> for IrqVector<'a> to convert
an IrqVector bound to specific pci::Device into an IrqRequest
bound to the same pci::Device's parent Device
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- PinInit:
- Add {pin_}init_scope() to execute code before creating an
initializer
- Platform:
- Leverage pin_init_scope() to get rid of redundant Result in IRQ
methods
- Timekeeping:
- Implement abstraction of udelay()
- Uaccess:
- Implement read_slice_partial() and read_slice_file() for
UserSliceReader
- Implement write_slice_partial() and write_slice_file() for
UserSliceWriter
sysfs:
- Prepare the constification of struct attribute"
* tag 'driver-core-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (75 commits)
rust: pci: fix build failure when CONFIG_PCI_MSI is disabled
debugfs: Fix default access mode config check
debugfs: Remove broken no-mount mode
debugfs: Remove redundant access mode checks
driver core: Check drivers_autoprobe for all added devices
driver core: WQ_PERCPU added to alloc_workqueue users
driver core: replace use of system_unbound_wq with system_dfl_wq
tick/nohz: Expose housekeeping CPUs in sysfs
tick/nohz: avoid showing '(null)' if nohz_full= not set
sysfs/cpu: Use DEVICE_ATTR_RO for nohz_full attribute
kernfs: fix memory leak of kernfs_iattrs in __kernfs_new_node
fs/kernfs: raise sb->maxbytes to MAX_LFS_FILESIZE
mod_devicetable: Bump auxiliary_device_id name size
sysfs: simplify attribute definition macros
samples/kobject: constify 'struct foo_attribute'
samples/kobject: add is_visible() callback to attribute group
sysfs: attribute_group: enable const variants of is_visible()
sysfs: introduce __SYSFS_FUNCTION_ALTERNATIVE()
sysfs: transparently handle const pointers in ATTRIBUTE_GROUPS()
sysfs: attribute_group: allow registration of const attribute
...
|
|
Pull VFIO updates from Alex Williamson:
- Move libvfio selftest artifacts in preparation of more tightly
coupled integration with KVM selftests (David Matlack)
- Fix comment typo in mtty driver (Chu Guangqing)
- Support for new hardware revision in the hisi_acc vfio-pci variant
driver where the migration registers can now be accessed via the PF.
When enabled for this support, the full BAR can be exposed to the
user (Longfang Liu)
- Fix vfio cdev support for VF token passing, using the correct size
for the kernel structure, thereby actually allowing userspace to
provide a non-zero UUID token. Also set the match token callback for
the hisi_acc, fixing VF token support for this this vfio-pci variant
driver (Raghavendra Rao Ananta)
- Introduce internal callbacks on vfio devices to simplify and
consolidate duplicate code for generating VFIO_DEVICE_GET_REGION_INFO
data, removing various ioctl intercepts with a more structured
solution (Jason Gunthorpe)
- Introduce dma-buf support for vfio-pci devices, allowing MMIO regions
to be exposed through dma-buf objects with lifecycle managed through
move operations. This enables low-level interactions such as a
vfio-pci based SPDK drivers interacting directly with dma-buf capable
RDMA devices to enable peer-to-peer operations. IOMMUFD is also now
able to build upon this support to fill a long standing feature gap
versus the legacy vfio type1 IOMMU backend with an implementation of
P2P support for VM use cases that better manages the lifecycle of the
P2P mapping (Leon Romanovsky, Jason Gunthorpe, Vivek Kasireddy)
- Convert eventfd triggering for error and request signals to use RCU
mechanisms in order to avoid a 3-way lockdep reported deadlock issue
(Alex Williamson)
- Fix a 32-bit overflow introduced via dma-buf support manifesting with
large DMA buffers (Alex Mastro)
- Convert nvgrace-gpu vfio-pci variant driver to insert mappings on
fault rather than at mmap time. This conversion serves both to make
use of huge PFNMAPs but also to both avoid corrected RAS events
during reset by now being subject to vfio-pci-core's use of
unmap_mapping_range(), and to enable a device readiness test after
reset (Ankit Agrawal)
- Refactoring of vfio selftests to support multi-device tests and split
code to provide better separation between IOMMU and device objects.
This work also enables a new test suite addition to measure parallel
device initialization latency (David Matlack)
* tag 'vfio-v6.19-rc1' of https://github.com/awilliam/linux-vfio: (65 commits)
vfio: selftests: Add vfio_pci_device_init_perf_test
vfio: selftests: Eliminate INVALID_IOVA
vfio: selftests: Split libvfio.h into separate header files
vfio: selftests: Move vfio_selftests_*() helpers into libvfio.c
vfio: selftests: Rename vfio_util.h to libvfio.h
vfio: selftests: Stop passing device for IOMMU operations
vfio: selftests: Move IOVA allocator into iova_allocator.c
vfio: selftests: Move IOMMU library code into iommu.c
vfio: selftests: Rename struct vfio_dma_region to dma_region
vfio: selftests: Upgrade driver logging to dev_err()
vfio: selftests: Prefix logs with device BDF where relevant
vfio: selftests: Eliminate overly chatty logging
vfio: selftests: Support multiple devices in the same container/iommufd
vfio: selftests: Introduce struct iommu
vfio: selftests: Rename struct vfio_iommu_mode to iommu_mode
vfio: selftests: Allow passing multiple BDFs on the command line
vfio: selftests: Split run.sh into separate scripts
vfio: selftests: Move run.sh into scripts directory
vfio/nvgrace-gpu: wait for the GPU mem to be ready
vfio/nvgrace-gpu: Inform devmem unmapped after reset
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to
test_progs runner (Alexis Lothoré)
- Convert selftests/bpf/test_xsk to test_progs runner (Bastien
Curutchet)
- Replace bpf memory allocator with kmalloc_nolock() in
bpf_local_storage (Amery Hung), and in bpf streams and range tree
(Puranjay Mohan)
- Introduce support for indirect jumps in BPF verifier and x86 JIT
(Anton Protopopov) and arm64 JIT (Puranjay Mohan)
- Remove runqslower bpf tool (Hoyeon Lee)
- Fix corner cases in the verifier to close several syzbot reports
(Eduard Zingerman, KaFai Wan)
- Several improvements in deadlock detection in rqspinlock (Kumar
Kartikeya Dwivedi)
- Implement "jmp" mode for BPF trampoline and corresponding
DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance
from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong)
- Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul
Chaignon)
- Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel
Borkmann)
- Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko)
- Optimize bpf_map_update_elem() for map-in-map types (Ritesh
Oedayrajsingh Varma)
- Introduce overwrite mode for BPF ring buffer (Xu Kuohai)
* tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits)
bpf: optimize bpf_map_update_elem() for map-in-map types
bpf: make kprobe_multi_link_prog_run always_inline
selftests/bpf: do not hardcode target rate in test_tc_edt BPF program
selftests/bpf: remove test_tc_edt.sh
selftests/bpf: integrate test_tc_edt into test_progs
selftests/bpf: rename test_tc_edt.bpf.c section to expose program type
selftests/bpf: Add success stats to rqspinlock stress test
rqspinlock: Precede non-head waiter queueing with AA check
rqspinlock: Disable spinning for trylock fallback
rqspinlock: Use trylock fallback when per-CPU rqnode is busy
rqspinlock: Perform AA checks immediately
rqspinlock: Enclose lock/unlock within lock entry acquisitions
bpf: Remove runqslower tool
selftests/bpf: Remove usage of lsm/file_alloc_security in selftest
bpf: Disable file_alloc_security hook
bpf: check for insn arrays in check_ptr_alignment
bpf: force BPF_F_RDONLY_PROG on insn array creation
bpf: Fix exclusive map memory leak
selftests/bpf: Make CS length configurable for rqspinlock stress test
selftests/bpf: Add lock wait time stats to rqspinlock stress test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Add support for 'syn'.
Syn is a parsing library for parsing a stream of Rust tokens into a
syntax tree of Rust source code.
Currently this library is geared toward use in Rust procedural
macros, but contains some APIs that may be useful more generally.
'syn' allows us to greatly simplify writing complex macros such as
'pin-init' (Benno has already prepared the 'syn'-based version). We
will use it in the 'macros' crate too.
'syn' is the most downloaded Rust crate (according to crates.io),
and it is also used by the Rust compiler itself. While the amount
of code is substantial, there should not be many updates needed for
these crates, and even if there are, they should not be too big,
e.g. +7k -3k lines across the 3 crates in the last year.
'syn' requires two smaller dependencies: 'quote' and 'proc-macro2'.
I only modified their code to remove a third dependency
('unicode-ident') and to add the SPDX identifiers. The code can be
easily verified to exactly match upstream with the provided
scripts.
They are all licensed under "Apache-2.0 OR MIT", like the other
vendored 'alloc' crate we had for a while.
Please see the merge commit with the cover letter for more context.
- Allow 'unreachable_pub' and 'clippy::disallowed_names' for
doctests.
Examples (i.e. doctests) may want to do things like show public
items and use names such as 'foo'.
Nevertheless, we still try to keep examples as close to real code
as possible (this is part of why running Clippy on doctests is
important for us, e.g. for safety comments, which userspace Rust
does not support yet but we are stricter).
'kernel' crate:
- Replace our custom 'CStr' type with 'core::ffi::CStr'.
Using the standard library type reduces our custom code footprint,
and we retain needed custom functionality through an extension
trait and a new 'fmt!' macro which replaces the previous 'core'
import.
This started in 6.17 and continued in 6.18, and we finally land the
replacement now. This required quite some stamina from Tamir, who
split the changes in steps to prepare for the flag day change here.
- Replace 'kernel::c_str!' with C string literals.
C string literals were added in Rust 1.77, which produce '&CStr's
(the 'core' one), so now we can write:
c"hi"
instead of:
c_str!("hi")
- Add 'num' module for numerical features.
It includes the 'Integer' trait, implemented for all primitive
integer types.
It also includes the 'Bounded' integer wrapping type: an integer
value that requires only the 'N' least significant bits of the
wrapped type to be encoded:
// An unsigned 8-bit integer, of which only the 4 LSBs are used.
let v = Bounded::<u8, 4>::new::<15>();
assert_eq!(v.get(), 15);
'Bounded' is useful to e.g. enforce guarantees when working with
bitfields that have an arbitrary number of bits.
Values can also be constructed from simple non-constant expressions
or, for more complex ones, validated at runtime.
'Bounded' also comes with comparison and arithmetic operations
(with both their backing type and other 'Bounded's with a
compatible backing type), casts to change the backing type,
extending/shrinking and infallible/fallible conversions from/to
primitives as applicable.
- 'rbtree' module: add immutable cursor ('Cursor').
It enables to use just an immutable tree reference where
appropriate. The existing fully-featured mutable cursor is renamed
to 'CursorMut'.
kallsyms:
- Fix wrong "big" kernel symbol type read from procfs.
'pin-init' crate:
- A couple minor fixes (Benno asked me to pick these patches up for
him this cycle).
Documentation:
- Quick Start guide: add Debian 13 (Trixie).
Debian Stable is now able to build Linux, since Debian 13 (released
2025-08-09) packages Rust 1.85.0, which is recent enough.
We are planning to propose that the minimum supported Rust version
in Linux follows Debian Stable releases, with Debian 13 being the
first one we upgrade to, i.e. Rust 1.85.
MAINTAINERS:
- Add entry for the new 'num' module.
- Remove Alex as Rust maintainer: he hasn't had the time to
contribute for a few years now, so it is a no-op change in
practice.
And a few other cleanups and improvements"
* tag 'rust-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (53 commits)
rust: macros: support `proc-macro2`, `quote` and `syn`
rust: syn: enable support in kbuild
rust: syn: add `README.md`
rust: syn: remove `unicode-ident` dependency
rust: syn: add SPDX License Identifiers
rust: syn: import crate
rust: quote: enable support in kbuild
rust: quote: add `README.md`
rust: quote: add SPDX License Identifiers
rust: quote: import crate
rust: proc-macro2: enable support in kbuild
rust: proc-macro2: add `README.md`
rust: proc-macro2: remove `unicode_ident` dependency
rust: proc-macro2: add SPDX License Identifiers
rust: proc-macro2: import crate
rust: kbuild: support using libraries in `rustc_procmacro`
rust: kbuild: support skipping flags in `rustc_test_library`
rust: kbuild: add proc macro library support
rust: kbuild: simplify `--cfg` handling
rust: kbuild: introduce `core-flags` and `core-skip_flags`
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Mutexes:
- Redo __mutex_init() to reduce generated code size (Sebastian
Andrzej Siewior)
Seqlocks:
- Introduce scoped_seqlock_read() (Peter Zijlstra)
- Change thread_group_cputime() to use scoped_seqlock_read() (Oleg
Nesterov)
- Change do_task_stat() to use scoped_seqlock_read() (Oleg Nesterov)
- Change do_io_accounting() to use scoped_seqlock_read() (Oleg
Nesterov)
- Fix the incorrect documentation of read_seqbegin_or_lock() /
need_seqretry() (Oleg Nesterov)
- Allow KASAN to fail optimizing (Peter Zijlstra)
Local lock updates:
- Fix all kernel-doc warnings (Randy Dunlap)
- Add the <linux/local_lock*.h> headers to MAINTAINERS (Sebastian
Andrzej Siewior)
- Reduce the risk of shadowing via s/l/__l/ and s/tl/__tl/ (Vincent
Mailhol)
Lock debugging:
- spinlock/debug: Fix data-race in do_raw_write_lock (Alexander
Sverdlin)
Atomic primitives infrastructure:
- atomic: Skip alignment check for try_cmpxchg() old arg (Arnd
Bergmann)
Rust runtime integration:
- sync: atomic: Enable generated Atomic<T> usage (Boqun Feng)
- sync: atomic: Implement Debug for Atomic<Debug> (Boqun Feng)
- debugfs: Remove Rust native atomics and replace them with Linux
versions (Boqun Feng)
- debugfs: Implement Reader for Mutex<T> only when T is Unpin (Boqun
Feng)
- lock: guard: Add T: Unpin bound to DerefMut (Daniel Almeida)
- lock: Pin the inner data (Daniel Almeida)
- lock: Add a Pin<&mut T> accessor (Daniel Almeida)"
* tag 'locking-core-2025-12-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/local_lock: Fix all kernel-doc warnings
locking/local_lock: s/l/__l/ and s/tl/__tl/ to reduce the risk of shadowing
locking/local_lock: Add the <linux/local_lock*.h> headers to MAINTAINERS
locking/mutex: Redo __mutex_init() to reduce generated code size
rust: debugfs: Replace the usage of Rust native atomics
rust: sync: atomic: Implement Debug for Atomic<Debug>
rust: sync: atomic: Make Atomic*Ops pub(crate)
seqlock: Allow KASAN to fail optimizing
rust: debugfs: Implement Reader for Mutex<T> only when T is Unpin
seqlock: Change do_io_accounting() to use scoped_seqlock_read()
seqlock: Change do_task_stat() to use scoped_seqlock_read()
seqlock: Change thread_group_cputime() to use scoped_seqlock_read()
seqlock: Introduce scoped_seqlock_read()
documentation: seqlock: fix the wrong documentation of read_seqbegin_or_lock/need_seqretry
atomic: Skip alignment check for try_cmpxchg() old arg
rust: lock: Add a Pin<&mut T> accessor
rust: lock: Pin the inner data
rust: lock: guard: Add T: Unpin bound to DerefMut
locking/spinlock/debug: Fix data-race in do_raw_write_lock
|
|
This follow-up patch completes centralization of kselftest.h and
ksefltest_harness.h includes in remaining seltests files, replacing all
relative paths with a non-relative paths using shared -I include path in
lib.mk
Tested with gcc-13.3 and clang-18.1, and cross-compiled successfully on
riscv, arm64, x86_64 and powerpc arch.
[reddybalavignesh9979@gmail.com: add selftests include path for kselftest.h]
Link: https://lkml.kernel.org/r/20251017090201.317521-1-reddybalavignesh9979@gmail.com
Link: https://lkml.kernel.org/r/20251016104409.68985-1-reddybalavignesh9979@gmail.com
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/lkml/20250820143954.33d95635e504e94df01930d0@linux-foundation.org/
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Günther Noack <gnoack@google.com>
Cc: Jakub Kacinski <kuba@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mickael Salaun <mic@digikod.net>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Simon Horman <horms@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Conflicts:
net/xdp/xsk.c
0ebc27a4c67d ("xsk: avoid data corruption on cq descriptor number")
8da7bea7db69 ("xsk: add indirect call for xsk_destruct_skb")
30ed05adca4a ("xsk: use a smaller new lock for shared pool case")
https://lore.kernel.org/20251127105450.4a1665ec@canb.auug.org.au
https://lore.kernel.org/eb4eee14-7e24-4d1b-b312-e9ea738fefee@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Showcase and test the new 'struct attribute' constification facilities.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251029-sysfs-const-attr-prep-v5-6-ea7d745acff4@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There was no example for the is_visible() callback so far.
It will also become an example and test for the constification of
'struct attribute' later.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20251029-sysfs-const-attr-prep-v5-5-ea7d745acff4@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace driver_pci -> rust_driver_pci in config SAMPLE_RUST_DRIVER_PCI.
Signed-off-by: Peter Colberg <pcolberg@redhat.com>
Fixes: 685376d18e9a ("samples: rust: add Rust PCI sample driver")
Link: https://patch.msgid.link/20251120-rust-driver-pci-fix-module-name-v1-1-430cee310dc0@redhat.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Apparently as of version 2.42, glibc headers define AT_RENAME_NOREPLACE
and some of the other flags for renameat2() and friends in <stdio.h>.
Which would all be fine, except for inexplicable reasons glibc decided
to define them _differently_ from the kernel definitions, which then
makes some of our sample code that includes both kernel headers and user
space headers unhappy, because the compiler will (correctly) complain
about redefining things.
Now, mixing kernel headers and user space headers is always a somewhat
iffy proposition due to namespacing issues, but it's kind of inevitable
in our sample and selftest code. And this is just glibc being stupid.
Those defines come from the kernel, glibc is exposing the kernel
interfaces, and glibc shouldn't make up some random new expressions for
these values.
It's not like glibc headers changed the actual result values, but they
arbitrarily just decided to use a different expression to describe those
values. The kernel just does
#define AT_RENAME_NOREPLACE 0x0001
while glibc does
# define RENAME_NOREPLACE (1 << 0)
# define AT_RENAME_NOREPLACE RENAME_NOREPLACE
instead. Same value in the end, but very different macro definition.
For absolutely no reason.
This has since been fixed in the glibc development tree, so eventually
we'll end up with the canonical expressions and no clashes. But in the
meantime the broken headers are in the glibc-2.42 release and have made
it out into distributions.
Do a minimal work-around to make the samples build cleanly by just
undefining the affected macros in between the user space header include
and the kernel header includes.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add a new `rust_i2c_client` sample, showing how to create a new
i2c client using `i2c::Registration`
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20251116162210.171542-1-igor.korotin.linux@gmail.com
[ * Remove dependency to I2C_CHARDEV, depend on I2C=y.
* Remove unnecessary impl Drop for SampleDriver.
* Rename i2c::Registration, import Devres.
* Fixup module description.
* Add new source file to MAINTAINERS.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Add a new `rust_driver_i2c` sample, showing how to create a new
i2c driver using ACPI/OF/Legacy ID tables.
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Igor Korotin <igor.korotin.linux@gmail.com>
Link: https://patch.msgid.link/20251116162204.171518-1-igor.korotin.linux@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Remove the duplicate code and change info to a pointer. caps are not used.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/21-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
This driver open codes the cap chain manipulations. Instead use
vfio_info_add_capability() and the get_region_info_caps() op.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/16-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Move it out of mbochs_ioctl() and re-indent it.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/8-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Move it out of mdpy_ioctl() and re-indent it.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/7-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Move it out of mtty_ioctl() and re-indent it.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v2-2a9e24d62f1b+e10a-vfio_get_region_info_op_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Rust native atomics are not allowed to use in kernel due to the mismatch
of memory model with Linux kernel memory model, hence remove the usage
of Rust native atomics in debufs.
Reviewed-by: Matthew Maurer <mmaurer@google.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: David Gow <davidgow@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20251022035324.70785-4-boqun.feng@gmail.com
|
|
Fix some coding style issues in Kconfig: use one tab to indent lines under
a config definition, and use an additional two spaces to indent help text.
Link: https://lkml.kernel.org/r/20250929062434.4114607-1-zhouyuhang1010@163.com
Signed-off-by: Zhou Yuhang <zhouyuhang@kylinos.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The comment incorrectly used "atleast" instead of "at least".
Signed-off-by: Chu Guangqing <chuguangqing@inspur.com>
Link: https://lore.kernel.org/r/20251015015954.2363-2-chuguangqing@inspur.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
Update all struct proto_ops connect() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extend the rust_debugfs_scoped sample to demonstrate how to export a
large binary object through a ScopedDir.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Matthew Maurer <mmaurer@google.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Extend the Rust debugfs sample to demonstrate usage of binary file
support. The example now shows how to expose both fixed-size arrays
and dynamically sized vectors as binary bl |
