| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
|
|
Allowing irq_work to be scheduled while trying to suspend has shown
to cause problems as some architectures interpret the pending
interrupts as a reason to not suspend. This became a problem for
printk() with the introduction of NBCON consoles. With every
printk() call, NBCON console printing kthreads are woken by queueing
irq_work. This means that irq_work continues to be queued due to
printk() calls late in the suspend procedure.
Avoid this problem by preventing printk() from queueing irq_work
once console suspending has begun. This applies to triggering NBCON
and legacy deferred printing as well as klogd waiters.
Since triggering of NBCON threaded printing relies on irq_work, the
pr_flush() within console_suspend_all() is used to perform the final
flushing before suspending consoles and blocking irq_work queueing.
NBCON consoles that are not suspended (due to the usage of the
"no_console_suspend" boot argument) transition to atomic flushing.
Introduce a new global variable @console_irqwork_blocked to flag
when irq_work queueing is to be avoided. The flag is used by
printk_get_console_flush_type() to avoid allowing deferred printing
and switch NBCON consoles to atomic flushing. It is also used by
vprintk_emit() to avoid klogd waking.
Add WARN_ON_ONCE(console_irqwork_blocked) to the irq_work queuing
functions to catch any code that attempts to queue printk irq_work
during the suspending/resuming procedure.
Cc: stable@vger.kernel.org # 6.13.x because no drivers in 6.12.x
Fixes: 6b93bb41f6ea ("printk: Add non-BKL (nbcon) console basic infrastructure")
Closes: https://lore.kernel.org/lkml/DB9PR04MB8429E7DDF2D93C2695DE401D92C4A@DB9PR04MB8429.eurprd04.prod.outlook.com
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://patch.msgid.link/20251113160351.113031-3-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The helper will be used on KDB code in the next commits.
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Link: https://patch.msgid.link/20251016-nbcon-kgdboc-v6-1-866aac60a80e@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The helper other_cpu_in_panic() duplicated logic already provided by
panic_on_other_cpu().
Remove other_cpu_in_panic() and update all users to call
panic_on_other_cpu() instead.
This removes redundant code and makes panic handling consistent.
Link: https://lkml.kernel.org/r/20250825022947.1596226-9-wangjinchao600@gmail.com
Signed-off-by: Jinchao Wang <wangjinchao600@gmail.com>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Kees Cook <kees@kernel.org>
Cc: Li Huafei <lihuafei1@huawei.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Luo Gengkun <luogengkun@huaweicloud.com>
Cc: Max Kellermann <max.kellermann@ionos.com>
Cc: Nam Cao <namcao@linutronix.de>
Cc: oushixiong <oushixiong@kylinos.cn>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Qianqiang Liu <qianqiang.liu@163.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Sohil Mehta <sohil.mehta@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Zimemrmann <tzimmermann@suse.de>
Cc: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Yunhui Cui <cuiyunhui@bytedance.com>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Add new "hash_pointers=[auto|always|never]" boot parameter to force
the hashing even with "slab_debug" enabled
- Allow to stop CPU, after losing nbcon console ownership during
panic(), even without proper NMI
- Allow to use the printk kthread immediately even for the 1st
registered nbcon
- Compiler warning removal
* tag 'printk-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: nbcon: Allow reacquire during panic
printk: Allow to use the printk kthread immediately even for 1st nbcon
slab: Decouple slab_debug and no_hash_pointers
vsprintf: Use __diag macros to disable '-Wsuggest-attribute=format'
compiler-gcc.h: Introduce __diag_GCC_all
|
|
vprintk_deferred() is useful for implementing runtime verification
reactors. Make it public.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The kthreads for nbcon consoles are created by nbcon_alloc() at
the beginning of the console registration. But it currently works
only for the 2nd or later nbcon console because the code checks
@printk_kthreads_running.
The kthread for the 1st registered nbcon console is created at the very
end of register_console() by printk_kthreads_check_locked(). As a result,
the entire log is replayed synchronously when the "enabled" message
gets printed. It might block the boot for a long time with a slow serial
console.
Prevent the synchronous flush by creating the kthread even for the 1st
nbcon console when it is safe (kthreads ready and no boot consoles).
Also inform printk() to use the kthread by setting
@printk_kthreads_running. Note that the kthreads already must be
running when it is safe and this is not the 1st nbcon console.
Symmetrically, clear @printk_kthreads_running when the last nbcon
console was unregistered by nbcon_free(). This requires updating
@have_nbcon_console before nbcon_free() gets called.
Note that there is _no_ problem when the 1st nbcon console replaces boot
consoles. In this case, the kthread will be started at the end
of registration after the boot consoles are removed. But the console
does not reply the entire log buffer in this case. Note that
the flag CON_PRINTBUFFER is always cleared when the boot consoles are
removed and vice versa.
Closes: https://lore.kernel.org/r/20250514173514.2117832-1-mcobb@thegoodpenguin.co.uk
Tested-by: Michael Cobb <mcobb@thegoodpenguin.co.uk>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://patch.msgid.link/20250604142045.253301-1-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Commit 779dbc2e78d7 ("printk: Avoid non-panic CPUs writing to ringbuffer")
aimed to isolate panic-related messages. However, when panic() itself
malfunctions, messages from non-panic CPUs become crucial for debugging.
While commit bcc954c6caba ("printk/panic: Allow cpu backtraces to
be written into ringbuffer during panic") enables non-panic CPU
backtraces, it may not provide sufficient diagnostic information.
Introduce the "debug_non_panic_cpus" command-line option, enabling
non-panic CPU messages to be stored in the ring buffer during a panic.
This also prevents discarding non-finalized messages from non-panic CPUs
during console flushing, providing a more comprehensive view of system
state during critical failures.
Link: https://lore.kernel.org/all/Z8cLEkqLL2IOyNIj@pathway/
Signed-off-by: Donghyeok Choe <d7271.choe@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250318022320.2428155-1-d7271.choe@samsung.com
[pmladek@suse.com: Added documentation, added module_parameter, removed printk_ prefix.]
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The documentation of printk_cpu_sync_get() clearly states
that the owner must never perform any activities where it waits
for a CPU. For legacy printing there can be spinning on the
console_lock and on the port lock. Therefore legacy printing
must be deferred when holding the printk_cpu_sync.
Note that in the case of emergency states, atomic consoles
are not prevented from printing when printk is deferred. This
is appropriate because they do not spin-wait indefinitely for
other CPUs.
Reported-by: Rik van Riel <riel@surriel.com>
Closes: https://lore.kernel.org/r/20240715232052.73eb7fb1@imladris.surriel.com
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Fixes: 55d6af1d6688 ("lib/nmi_backtrace: explicitly serialize banner and regs")
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20241209111746.192559-3-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Introduce FORCE_CON flag to printk. The new flag will make it possible to
create a context where printk messages will never be suppressed.
This mechanism will be used in the next patch to create a force_con
context on sysrq handling, removing an existing workaround on the
loglevel global variable. The workaround existed to make sure that sysrq
header messages were sent to all consoles, but this doesn't work with
deferred messages because the loglevel might be restored to its original
value before a console flushes the messages.
Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20241105-printk-loud-con-v2-1-bd3ecdf7b0e4@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The write() callback of legacy consoles usually makes use of
spinlocks. This is not permitted with PREEMPT_RT in atomic
contexts.
For PREEMPT_RT, create a new kthread to handle printing of all
the legacy consoles (and nbcon consoles if boot consoles are
registered). This allows legacy consoles to work on PREEMPT_RT
without requiring modification. (However they will not have
the reliability properties guaranteed by nbcon atomic
consoles.)
Use the existing printk_kthreads_check_locked() to start/stop
the legacy kthread as needed.
Introduce the macro force_legacy_kthread() to query if the
forced threading of legacy consoles is in effect. Although
currently only enabled for PREEMPT_RT, this acts as a simple
mechanism for the future to allow other preemption models to
easily take advantage of the non-interference property provided
by the legacy kthread.
When force_legacy_kthread() is true, the legacy kthread
fulfills the role of the console_flush_type @legacy_offload by
waking the legacy kthread instead of printing via the
console_lock in the irq_work. If the legacy kthread is not
yet available, no legacy printing takes place (unless in
panic).
If for some reason the legacy kthread fails to create, any
legacy consoles are unregistered. With force_legacy_kthread(),
the legacy kthread is a critical component for legacy consoles.
These changes only affect CONFIG_PREEMPT_RT.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-16-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
An emergency or panic context can takeover console ownership
while the current owner was printing a printk message. The
atomic printer will re-print the message that the previous
owner was printing. However, this can look confusing to the
user and may even seem as though a message was lost.
[3430014.1
[3430014.181123] usb 1-2: Product: USB Audio
Add a new field @nbcon_prev_seq to struct console to track
the sequence number to print that was assigned to the previous
console owner. If this matches the sequence number to print
that the current owner is assigned, then a takeover must have
occurred. In this case, print an additional message to inform
the user that the previous message is being printed again.
[3430014.1
** replaying previous printk message **
[3430014.181123] usb 1-2: Product: USB Audio
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-12-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Once the kthread is running and available
(i.e. @printk_kthreads_running is set), the kthread becomes
responsible for flushing any pending messages which are added
in NBCON_PRIO_NORMAL context. Namely the legacy
console_flush_all() and device_release() no longer flush the
console. And nbcon_atomic_flush_pending() used by
nbcon_cpu_emergency_exit() no longer flushes messages added
after the emergency messages.
The console context is safe when used by the kthread only when
one of the following conditions are true:
1. Other caller acquires the console context with
NBCON_PRIO_NORMAL with preemption disabled. It will
release the context before rescheduling.
2. Other caller acquires the console context with
NBCON_PRIO_NORMAL under the device_lock.
3. The kthread is the only context which acquires the console
with NBCON_PRIO_NORMAL.
This is satisfied for all atomic printing call sites:
nbcon_legacy_emit_next_record() (#1)
nbcon_atomic_flush_pending_con() (#1)
nbcon_device_release() (#2)
It is even double guaranteed when @printk_kthreads_running
is set because then _only_ the kthread will print for
NBCON_PRIO_NORMAL. (#3)
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-10-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
When printing via console_lock, the write_atomic() callback is
used for nbcon consoles. However, if it is known that the
current context is a task context, the write_thread() callback
can be used instead.
Using write_thread() instead of write_atomic() helps to reduce
large disabled preemption regions when the device_lock does not
disable preemption.
This is mainly a preparatory change to allow avoiding
write_atomic() completely during normal operation if boot
consoles are registered.
As a side-effect, it also allows consolidating the printing
code for legacy printing and the kthread printer.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-9-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Provide the main implementation for running a printer kthread
per nbcon console that is takeover/handover aware. This
includes:
- new mandatory write_thread() callback
- kthread creation
- kthread main printing loop
- kthread wakeup mechanism
- kthread shutdown
kthread creation is a bit tricky because consoles may register
before kthreads can be created. In such cases, registration
will succeed, even though no kthread exists. Once kthreads can
be created, an early_initcall will set @printk_kthreads_ready.
If there are no registered boot consoles, the early_initcall
creates the kthreads for all registered nbcon consoles. If
kthread creation fails, the related console is unregistered.
If there are registered boot consoles when
@printk_kthreads_ready is set, no kthreads are created until
the final boot console unregisters.
Once kthread creation finally occurs, @printk_kthreads_running
is set so that the system knows kthreads are available for all
registered nbcon consoles.
If @printk_kthreads_running is already set when the console
is registering, the kthread is created during registration. If
kthread creation fails, the registration will fail.
Until @printk_kthreads_running is set, console printing occurs
directly via the console_lock.
kthread shutdown on system shutdown/reboot is necessary to
ensure the printer kthreads finish their printing so that the
system can cleanly transition back to direct printing via the
console_lock in order to reliably push out the final
shutdown/reboot messages. @printk_kthreads_running is cleared
before shutting down the individual kthreads.
The kthread uses a new mandatory write_thread() callback that
is called with both device_lock() and the console context
acquired.
The console ownership handling is necessary for synchronization
against write_atomic() which is synchronized only via the
console context ownership.
The device_lock() serializes acquiring the console context with
NBCON_PRIO_NORMAL. It is needed in case the device_lock() does
not disable preemption. It prevents the following race:
CPU0 CPU1
[ task A ]
nbcon_context_try_acquire()
# success with NORMAL prio
# .unsafe == false; // safe for takeover
[ schedule: task A -> B ]
WARN_ON()
nbcon_atomic_flush_pending()
nbcon_context_try_acquire()
# success with EMERGENCY prio
# flushing
nbcon_context_release()
# HERE: con->nbcon_state is free
# to take by anyone !!!
nbcon_context_try_acquire()
# success with NORMAL prio [ task B ]
[ schedule: task B -> A ]
nbcon_enter_unsafe()
nbcon_context_can_proceed()
BUG: nbcon_context_can_proceed() returns "true" because
the console is owned by a context on CPU0 with
NBCON_PRIO_NORMAL.
But it should return "false". The console is owned
by a context from task B and we do the check
in a context from task A.
Note that with these changes, the printer kthreads do not yet
take over full responsibility for nbcon printing during normal
operation. These changes only focus on the lifecycle of the
kthreads.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-7-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The nbcon consoles will have two callbacks to be used for
different contexts. In order to determine if an nbcon console
is usable, console_is_usable() must know if it is a context
that will need to use the optional write_atomic() callback.
Also, nbcon_emit_next_record() must know which callback it
needs to call.
Add an extra parameter @use_atomic to console_is_usable() and
nbcon_emit_next_record() to specify this.
Since so far only the write_atomic() callback exists,
@use_atomic is set to true for all call sites.
For legacy consoles, @use_atomic is not used.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-5-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
In emergency situations (something has gone wrong but the
system continues to operate), usually important information
(such as a backtrace) is generated via printk(). This
information should be pushed out to the consoles ASAP.
Add per-CPU emergency nesting tracking because an emergency
can arise while in an emergency situation.
Add functions to mark the beginning and end of emergency
sections where the urgent messages are generated.
Perform direct console flushing at the emergency priority if
the current CPU is in an emergency state and it is safe to do
so.
Note that the emergency state is not system-wide. While one CPU
is in an emergency state, another CPU may attempt to print
console messages at normal priority.
Also note that printk() already attempts to flush consoles in
the caller context for normal priority. However, follow-up
changes will introduce printing kthreads, in which case the
normal priority printk() calls will offload to the kthreads.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-32-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
There are many call sites where console flushing occur.
Depending on the system state and types of consoles, the flush
methods to use are different. A flush call site generally must
consider:
@have_boot_console
@have_nbcon_console
@have_legacy_console
@legacy_allow_panic_sync
is_printk_preferred()
and take into account the current CPU state:
NBCON_PRIO_NORMAL
NBCON_PRIO_EMERGENCY
NBCON_PRIO_PANIC
in order to decide if it should:
flush nbcon directly via atomic_write() callback
flush legacy directly via console_unlock
flush legacy via offload to irq_work
All of these call sites use their own logic to make this
decision, which is complicated and error prone. Especially
later when two more flush methods will be introduced:
flush nbcon via offload to kthread
flush legacy via offload to kthread
Introduce a new internal struct console_flush_type that specifies
which console flushing methods should be used in the context of
the caller.
Introduce a helper function to fill out console_flush_type to
be used for flushing call sites.
Replace the logic of all flushing call sites to use the new
helper.
This change standardizes behavior, leading to both fixes and
optimizations across various call sites. For instance, in
console_cpu_notify(), the new logic ensures that nbcon consoles
are flushed when they aren’t managed by the legacy loop.
Similarly, in console_flush_on_panic(), the system no longer
needs to flush nbcon consoles if none are present.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-31-john.ogness@linutronix.de
[pmladek@suse.com: Updated the commit message.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
If legacy and nbcon consoles are registered and the nbcon
consoles are allowed to flush (i.e. no boot consoles
registered), the legacy consoles will no longer perform
direct printing on the panic CPU until after the backtrace
has been stored. This will give the safe nbcon consoles a
chance to print the panic messages before allowing the
unsafe legacy consoles to print.
If no nbcon consoles are registered or they are not allowed
to flush because boot consoles are registered, there is no
change in behavior (i.e. legacy consoles will always attempt
to print from the printk() caller context).
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-30-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
There may be new records that were added while a driver was
holding the nbcon context for non-printing purposes. These
new records must be flushed by the nbcon_device_release()
context because no other context will do it.
If boot consoles are registered, the legacy loop is used
(either direct or per irq_work) to handle the flushing.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-25-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
If printk has been explicitly deferred or is called from NMI
context, legacy console printing must be deferred to an irq_work
context. Introduce a helper function is_printk_legacy_deferred()
for a CPU to query if it must defer legacy console printing.
In follow-up commits this helper will be needed at other call
sites as well.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-24-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Allow nbcon consoles to print messages in the legacy printk()
caller context (printing via unlock) by integrating them into
console_flush_all(). The write_atomic() callback is used for
printing.
Provide nbcon_legacy_emit_next_record(), which acts as the
nbcon variant of console_emit_next_record(). Call this variant
within console_flush_all() for nbcon consoles. Since nbcon
consoles use their own @nbcon_seq variable to track the next
record to print, this also must be appropriately handled in
console_flush_all().
Note that the legacy printing logic uses @handover to detect
handovers for printing all consoles. For nbcon consoles,
handovers/takeovers occur on a per-console basis and thus do
not cause the console_flush_all() loop to abort.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-23-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Provide nbcon_atomic_flush_pending() to perform flushing of all
registered nbcon consoles using their write_atomic() callback.
Unlike console_flush_all(), nbcon_atomic_flush_pending() will
only flush up through the newest record at the time of the
call. This prevents a CPU from printing unbounded when other
CPUs are adding records. If new records are added while
flushing, it is expected that the dedicated printer threads
will print those records. If the printer thread is not
available (which is always the case at this point in the
rework), nbcon_atomic_flush_pending() _will_ flush all records
in the ringbuffer.
Unlike console_flush_all(), nbcon_atomic_flush_pending() will
fully flush one console before flushing the next. This helps to
guarantee that a block of pending records (such as a stack
trace in an emergency situation) can be printed atomically at
once before releasing console ownership.
nbcon_atomic_flush_pending() is safe in any context because it
uses write_atomic() and acquires with unsafe_takeover disabled.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-21-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Add a helper function to use the current state of the CPU to
determine which priority to assign to the printing context.
The EMERGENCY priority handling is added in a follow-up commit.
It will use a per-CPU variable.
Note: nbcon_device_try_acquire(), which is used by console
drivers to acquire the nbcon console for non-printing
activities, is hard-coded to always use NORMAL priority.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-20-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The caller of console_is_usable() usually needs @console->flags
for its own checks. Rather than having console_is_usable() read
its own copy, make the caller pass in the @flags. This also
ensures that the caller saw the same @flags value.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-19-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The nbcon consoles use a different printing callback. For nbcon
consoles, check for the write_atomic() callback instead of
write().
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-18-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Move console_is_usable() as-is into internal.h so that it can
be used by nbcon printing functions as well.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-17-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
The headers kernel.h, serial_core.h, and console.h allow for the
definitions of many types and functions from other headers.
Rather than relying on these as proxy headers, explicitly
include all headers providing needed definitions. Also sort the
list alphabetically to be able to easily detect duplicates.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-16-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Add validation that printk_deferred_enter()/_exit() are called in
non-migration contexts.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-5-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
Rather than splitting the nbcon allocation and initialization into
two pieces, perform all initialization in nbcon_alloc(). Later,
the initial sequence is calculated and can be explicitly set using
nbcon_seq_force(). This removes the need for the strong rules of
nbcon_init() that even included a BUG_ON().
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240820063001.36405-3-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
const qualify the struct ctl_table argument in the proc_handler function
signatures. This is a prerequisite to moving the static ctl_table
structs into .rodata data which will ensure that proc_handler function
pointers cannot be modified.
This patch has been generated by the following coccinelle script:
```
virtual patch
@r1@
identifier ctl, write, buffer, lenp, ppos;
identifier func !~ "appldata_(timer|interval)_handler|sched_(rt|rr)_handler|rds_tcp_skbuf_handler|proc_sctp_do_(hmac_alg|rto_min|rto_max|udp_port|alpha_beta|auth|probe_interval)";
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos);
@r2@
identifier func, ctl, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int write, void *buffer, size_t *lenp, loff_t *ppos)
{ ... }
@r3@
identifier func;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int , void *, size_t *, loff_t *);
@r4@
identifier func, ctl;
@@
int func(
- struct ctl_table *ctl
+ const struct ctl_table *ctl
,int , void *, size_t *, loff_t *);
@r5@
identifier func, write, buffer, lenp, ppos;
@@
int func(
- struct ctl_table *
+ const struct ctl_table *
,int write, void *buffer, size_t *lenp, loff_t *ppos);
```
* Code formatting was adjusted in xfs_sysctl.c to comply with code
conventions. The xfs_stats_clear_proc_handler,
xfs_panic_mask_proc_handler and xfs_deprecated_dointvec_minmax where
adjusted.
* The ctl_table argument in proc_watchdog_common was const qualified.
This is called from a proc_handler itself and is calling back into
another proc_handler, making it necessary to change it as part of the
proc_handler migration.
Co-developed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Co-developed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
|
|
Implement an emit function for nbcon consoles to output printk
messages. It utilizes the lockless printk_get_next_message() and
console_prepend_dropped() functions to retrieve/build the output
message. The emit function includes the required safety points to
check for handover/takeover and calls a new write_atomic callback
of the console driver to output the message. It also includes
proper handling for updating the nbcon console sequence number.
A new nbcon_write_context struct is introduced. This is provided
to the write_atomic callback and includes only the information
necessary for performing atomic writes.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-8-john.ogness@linutronix.de
|
|
Add an atomic_long_t field @nbcon_seq to the console struct to
store the sequence number for nbcon consoles. For nbcon consoles
this will be used instead of the non-atomic @seq field. The new
field allows for safe atomic sequence number updates without
requiring any locking.
On 64bit systems the new field stores the full sequence number.
On 32bit systems the new field stores the lower 32 bits of the
sequence number, which are expanded to 64bit as needed by
folding the values based on the sequence numbers available in
the ringbuffer.
For 32bit systems, having a 32bit representation in the console
is sufficient. If a console ever gets more than 2^31 records
behind the ringbuffer then this is the least of the problems.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-7-john.ogness@linutronix.de
|
|
In case of hostile takeovers it must be ensured that the previous
owner cannot scribble over the output buffer of the emergency/panic
context. This is achieved by:
- Adding a global output buffer instance for the panic context.
This is the only situation where hostile takeovers can occur and
there is always at most 1 panic context.
- Allocating an output buffer per non-boot console upon console
registration. This buffer is used by the console owner when not
in panic context. (For boot consoles, the existing shared global
legacy output buffer is used instead. Boot console printing will
be synchronized with legacy console printing.)
- Choosing the appropriate buffer is handled in the acquire/release
functions.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-5-john.ogness@linutronix.de
|
|
The nbcon boot consoles also need printk buffers that are available
very early. Since the nbcon boot consoles will also be serialized
by the console_lock, they can use the same static printk buffers
that the legacy consoles are using.
Make the legacy static printk buffers available outside of printk.c
so they can be used by nbcon.c.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-4-john.ogness@linutronix.de
|
|
The current console/printk subsystem is protected by a Big Kernel Lock,
(aka console_lock) which has ill defined semantics and is more or less
stateless. This puts severe limitations on the console subsystem and
makes forced takeover and output in emergency and panic situations a
fragile endeavour that is based on try and pray.
The goal of non-BKL (nbcon) consoles is to break out of the console lock
jail and to provide a new infrastructure that avoids the pitfalls and
also allows console drivers to be gradually converted over.
The proposed infrastructure aims for the following properties:
- Per console locking instead of global locking
- Per console state that allows to make informed decisions
- Stateful handover and takeover
As a first step, state is added to struct console. The per console state
is an atomic_t using a 32bit bit field.
Reserve state bits, which will be populated later in the series. Wire
it up into the console register/unregister functionality.
It was decided to use a bitfield because using a plain u32 with
mask/shift operations resulted in uncomprehensible code.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-2-john.ogness@linutronix.de
|
|
Currently abandon_console_lock_in_panic() is only used to determine if
the current CPU should immediately release the console lock because
another CPU is in panic. However, later this function will be used by
the CPU to immediately release other resources in this situation.
Rename the function to other_cpu_in_panic(), which is a better
description and does not assume it is related to the console lock.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230717194607.145135-8-john.ogness@linutronix.de
|
|
The various internal size limit macros have names and/or values that
do not fit well to their current usage.
Rename the macros so that their purpose is clear and, if needed,
provide a more appropriate value. In general, the new macros and
values will lead to less memory usage. The new macros are...
PRINTK_MESSAGE_MAX:
This is the maximum size for a formatted message on a console,
devkmsg, or syslog. It does not matter which format the message has
(normal or extended). It replaces the use of CONSOLE_EXT_LOG_MAX for
console and devkmsg. It replaces the use of CONSOLE_LOG_MAX for
syslog.
Historically, normal messages have been allowed to print up to 1kB,
whereas extended messages have been allowed to print up to 8kB.
However, the difference in lengths of these message types is not
significant and in multi-line records, normal messages are probably
larger. Also, because 1kB is only slightly above the allowed record
size, multi-line normal messages could be easily truncated during
formatting.
This new macro should be significantly larger than the allowed
record size to allow sufficient space for extended or multi-line
prefix text. A value of 2kB should be plenty of space. For normal
messages this represents a doubling of the historically allowed
amount. For extended messages it reduces the excessive 8kB size,
thus reducing memory usage needed for message formatting.
PRINTK_PREFIX_MAX:
This is the maximum size allowed for a record prefix (used by
console and syslog). It replaces PREFIX_MAX. The value is left
unchanged.
PRINTKRB_RECORD_MAX:
This is the maximum size allowed to be reserved for a record in the
ringbuffer. It is used by all readers and writers with the printk
ringbuffer. It replaces LOG_LINE_MAX.
Previously this was set to "1kB - PREFIX_MAX", which makes some
sense if 1kB is the limit for normal message output and prefixes are
enabled. However, with the allowance of larger output and the
existence of multi-line records, the value is rather bizarre.
Round the value up to 1kB.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-9-john.ogness@linutronix.de
|
|
Currently "dropped messages" are separately printed immediately
before printing the printk message. Since normal consoles are
now using an output buffer that is much larger than previously,
the "dropped message" could be prepended to the printk message
and then output everything in a single write() call.
Introduce a helper function console_prepend_dropped() to prepend
an existing message with a "dropped message". This simplifies
the code by allowing all message formatting to be handled
together and then only requires a single write() call to output
the full message. And since this helper does not require any
locking, it can be used in the future for other console printing
contexts as well.
Note that console_prepend_dropped() is defined as a NOP for
!CONFIG_PRINTK. Although the function will never be called for
!CONFIG_PRINTK, compiling the function can lead to warnings of
"always true" conditionals due to the size macro values used
in !CONFIG_PRINTK.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230109100800.1085541-7-john.ogness@linutronix.de
|
|
Code for performing the console output is intermixed with code that
is formatting the output for that console. Introduce a new helper
function printk_get_next_message() to handle the reading and
formatting of the printk text. The helper does not require any
locking so that in the future it can be used for other printing
contexts as well.
This also introduces a new struct printk_message to wrap the struct
printk_buffers, adding metadata about its contents. This allows
users of printk_get_next_message() to receive all relevant
information about the message that was read and formatted.
Why is struct printk_message a wrapper struct?
It is intentional that a wrapper struct is introduced instead of
adding the metadata directly to struct printk_buffers. The upcoming
atomic consoles support multiple printing contexts per CPU. |
