| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
dma_map_resource() uses pfn_valid() to ensure the range is not RAM.
However, pfn_valid() only checks for availability of the memory map for
a PFN but it does not ensure that the PFN is actually backed by RAM. On
ARM64 with SPARSEMEM (128MB section granularity), MMIO addresses that
share a section with RAM will falsely trigger the WARN_ON_ONCE and cause
dma_map_resource() to return DMA_MAPPING_ERROR.
This causes a WARNING on Raspberry Pi 4 during spi_bcm2835 probe because
the SPI FIFO register (0xfe204004) falls in the same sparsemem section
as the end of RAM (0xf8000000-0xfbffffff), both in section 31
(0xf8000000-0xffffffff).
Move the sanity check from dma_map_resource() into debug_dma_map_phys()
and replace the unreliable pfn_valid() with pfn_valid() &&
!PageReserved(), which correctly identifies actual usable RAM without
false positives for MMIO regions that happen to have struct pages.
Since dma_map_resource() is dma_map_phys(DMA_ATTR_MMIO), the check
applies equally to both APIs. Any non-reserved page represents kernel
memory to a sufficient degree that using DMA_ATTR_MMIO on it is almost
certainly wrong and risks breaking coherency on non-coherent platforms.
ZONE_DEVICE pages used for PCI P2P DMA (MEMORY_DEVICE_PCI_P2PDMA) have
PageReserved set, so they will not trigger a false positive.
The check no longer blocks the mapping and uses err_printk() to
integrate with dma-debug filtering.
Fixes: f7326196a781 ("dma-mapping: export new dma_*map_phys() interface")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260513072209.1486986-1-jianpeng.chang.cn@windriver.com
|
|
Calculate the correct physical address of the last byte of memory. Since
max_pfn is in fact "the PFN of the first page after the highest system RAM
in physical address space", the highest address that might be used for a
DMA buffer is one byte below max_pfn << PAGE_SHIFT.
This fix is unlikely to make any difference in practice. It's just that the
current formula is slightly confusing.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260410113506.262579-1-ptesarik@suse.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- improve debuggability of reserve_mem kernel parameter handling with
print outs in case of a failure and debugfs info showing what was
actually reserved
- Make memblock_free_late() and free_reserved_area() use the same core
logic for freeing the memory to buddy and ensure it takes care of
updating memblock arrays when ARCH_KEEP_MEMBLOCK is enabled.
* tag 'memblock-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
x86/alternative: delay freeing of smp_locks section
memblock: warn when freeing reserved memory before memory map is initialized
memblock, treewide: make memblock_free() handle late freeing
memblock: make free_reserved_area() update memblock if ARCH_KEEP_MEMBLOCK=y
memblock: extract page freeing from free_reserved_area() into a helper
memblock: make free_reserved_area() more robust
mm: move free_reserved_area() to mm/memblock.c
powerpc: opal-core: pair alloc_pages_exact() with free_pages_exact()
powerpc: fadump: pair alloc_pages_exact() with free_pages_exact()
memblock: reserve_mem: fix end caclulation in reserve_mem_release_by_name()
memblock: move reserve_bootmem_range() to memblock.c and make it static
memblock: Add reserve_mem debugfs info
memblock: Print out errors on reserve_mem parser
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- added support for batched cache sync, what improves performance of
dma_map/unmap_sg() operations on ARM64 architecture (Barry Song)
- introduced DMA_ATTR_CC_SHARED attribute for explicitly shared memory
used in confidential computing (Jiri Pirko)
- refactored spaghetti-like code in drivers/of/of_reserved_mem.c and
its clients (Marek Szyprowski, shared branch with device-tree updates
to avoid merge conflicts)
- prepared Contiguous Memory Allocator related code for making dma-buf
drivers modularized (Maxime Ripard)
- added support for benchmarking dma_map_sg() calls to tools/dma
utility (Qinxin Xia)
* tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (24 commits)
dma-buf: heaps: system: document system_cc_shared heap
dma-buf: heaps: system: add system_cc_shared heap for explicitly shared memory
dma-mapping: introduce DMA_ATTR_CC_SHARED for shared memory
mm: cma: Export cma_alloc(), cma_release() and cma_get_name()
dma: contiguous: Export dev_get_cma_area()
dma: contiguous: Make dma_contiguous_default_area static
dma: contiguous: Make dev_get_cma_area() a proper function
dma: contiguous: Turn heap registration logic around
of: reserved_mem: rework fdt_init_reserved_mem_node()
of: reserved_mem: clarify fdt_scan_reserved_mem*() functions
of: reserved_mem: rearrange code a bit
of: reserved_mem: replace CMA quirks by generic methods
of: reserved_mem: switch to ops based OF_DECLARE()
of: reserved_mem: use -ENODEV instead of -ENOENT
of: reserved_mem: remove fdt node from the structure
dma-mapping: fix false kernel-doc comment marker
dma-mapping: Support batch mode for dma_direct_{map,unmap}_sg
dma-mapping: Separate DMA sync issuing and completion waiting
arm64: Provide dcache_inval_poc_nosync helper
arm64: Provide dcache_clean_poc_nosync helper
...
|
|
Current CC designs don't place a vIOMMU in front of untrusted devices.
Instead, the DMA API forces all untrusted device DMA through swiotlb
bounce buffers (is_swiotlb_force_bounce()) which copies data into
shared memory on behalf of the device.
When a caller has already arranged for the memory to be shared
via set_memory_decrypted(), the DMA API needs to know so it can map
directly using the unencrypted physical address rather than bounce
buffering. Following the pattern of DMA_ATTR_MMIO, add
DMA_ATTR_CC_SHARED for this purpose. Like the MMIO case, only the
caller knows what kind of memory it has and must inform the DMA API
for it to work correctly.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260325192352.437608-2-jiri@resnulli.us
|
|
It shouldn't be responsibility of memblock users to detect if they free
memory allocated from memblock late and should use memblock_free_late().
Make memblock_free() and memblock_phys_free() take care of late memory
freeing and drop memblock_free_late().
Link: https://patch.msgid.link/20260323074836.3653702-9-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
The CMA dma-buf heap uses the dev_get_cma_area() function to retrieve
the default contiguous area.
Now that this function is no longer inlined, and since we want to turn
the CMA heap into a module, let's export it.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260331-dma-buf-heaps-as-modules-v4-4-e18fda504419@kernel.org
|
|
Now that dev_get_cma_area() is no longer inline, we don't have any user
of dma_contiguous_default_area() outside of contiguous.c so we can make
it static.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260331-dma-buf-heaps-as-modules-v4-3-e18fda504419@kernel.org
|
|
As we try to enable dma-buf heaps, and the CMA one in particular, to
compile as modules, we need to export dev_get_cma_area(). It's currently
implemented as an inline function that returns either the content of
device->cma_area or dma_contiguous_default_area.
Thus, it means we need to export dma_contiguous_default_area, which
isn't really something we want any module to have access to.
Instead, let's make dev_get_cma_area() a proper function we will be able
to export so we can avoid exporting dma_contiguous_default_area.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260331-dma-buf-heaps-as-modules-v4-2-e18fda504419@kernel.org
|
|
The CMA heap instantiation was initially developed by having the
contiguous DMA code call into the CMA heap to create a new instance
every time a reserved memory area is probed.
Turning the CMA heap into a module would create a dependency of the
kernel on a module, which doesn't work.
Let's turn the logic around and do the opposite: store all the reserved
memory CMA regions into the contiguous DMA code, and provide an iterator
for the heap to use when it probes.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260331-dma-buf-heaps-as-modules-v4-1-e18fda504419@kernel.org
|
|
requirement
When CONFIG_DMA_API_DEBUG is enabled, the DMA debug infrastructure
tracks active mappings per cacheline and warns if two different DMA
mappings share the same cacheline ("cacheline tracking EEXIST,
overlapping mappings aren't supported").
On x86_64, ARCH_KMALLOC_MINALIGN defaults to 8, so small kmalloc
allocations (e.g. the 8-byte hub->buffer and hub->status in the USB
hub driver) frequently land in the same 64-byte cacheline. When both
are DMA-mapped, this triggers a false positive warning.
This has been reported repeatedly since v5.14 (when the EEXIST check
was added) across various USB host controllers and devices including
xhci_hcd with USB hubs, USB audio devices, and USB ethernet adapters.
The cacheline overlap is only a real concern on architectures that
require DMA buffer alignment to cacheline boundaries (i.e. where
ARCH_DMA_MINALIGN >= L1_CACHE_BYTES). On architectures like x86_64
where dma_get_cache_alignment() returns 1, the hardware is
cache-coherent and overlapping cacheline mappings are harmless.
Suppress the EEXIST warning when dma_get_cache_alignment() is less
than L1_CACHE_BYTES, indicating the architecture does not require
cacheline-aligned DMA buffers.
Verified with a kernel module reproducer that performs two kmalloc(8)
allocations back-to-back and DMA-maps both:
Before: allocations share a cacheline, EEXIST fires within ~50 pairs
After: same cacheline pair found, but no warning emitted
Fixes: 2b4bbc6231d7 ("dma-debug: report -EEXIST errors in add_dma_entry")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215740
Suggested-by: Harry Yoo <harry@kernel.org>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260327124156.24820-1-mikhail.v.gavrilov@gmail.com
|
|
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Add optional reserved memory callbacks to perform region verification and
early fixup, then move all CMA related code in of_reserved_mem.c to them.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260325090023.3175348-5-m.szyprowski@samsung.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Move init function from OF_DECLARE() argument to the given reserved
memory region ops structure and then pass that structure to the
OF_DECLARE() initializer. This node_init callback is mandatory for the
reserved mem driver. Such change makes it possible in the future to add
more functions called by the generic code before given memory region is
initialized and rmem object is created.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260325090023.3175348-4-m.szyprowski@samsung.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
When given reserved memory region doesn't really support given node,
return -ENODEV instead of -ENOENT. Then fix __reserved_mem_init_node()
function to properly propagate error code different from -ENODEV instead
of silently ignoring it.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260325090023.3175348-3-m.szyprowski@samsung.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
FDT node is not needed for anything besides the initialization, so it can
be simply passed as an argument to the reserved memory region init
function.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260325090023.3175348-2-m.szyprowski@samsung.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
dma-mapping fixes for Linux 7.0
A set of fixes for DMA-mapping subsystem, which resolve false-positive
warnings from KMSAN and DMA-API debug (Shigeru Yoshida and Leon
Romanovsky) as well as a simple build fix (Miguel Ojeda).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
DMA_ATTR_REQUIRE_COHERENT indicates that SWIOTLB must not be used.
Ensure the SWIOTLB path is declined whenever the DMA direct path is
selected.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-5-1dde90a7f08b@nvidia.com
|
|
The mapping buffers which carry this attribute require DMA coherent system.
This means that they can't take SWIOTLB path, can perform CPU cache overlap
and doesn't perform cache flushing.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-4-1dde90a7f08b@nvidia.com
|
|
Rename the DMA_ATTR_CPU_CACHE_CLEAN attribute to better reflect that it
is debugging aid to inform DMA core code that CPU cache line overlaps are
allowed, and refine the documentation describing its use.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-3-1dde90a7f08b@nvidia.com
|
|
Repeated DMA mappings with DMA_ATTR_CPU_CACHE_CLEAN trigger the
following splat. This prevents using the attribute in cases where a DMA
region is shared and reused more than seven times.
------------[ cut here ]------------
DMA-API: exceeded 7 overlapping mappings of cacheline 0x000000000438c440
WARNING: kernel/dma/debug.c:467 at add_dma_entry+0x219/0x280, CPU#4: ibv_rc_pingpong/1644
Modules linked in: xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay mlx5_fwctl zram zsmalloc mlx5_ib fuse rpcrdma rdma_ucm ib_uverbs ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_core ib_core
CPU: 4 UID: 2733 PID: 1644 Comm: ibv_rc_pingpong Not tainted 6.19.0+ #129 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:add_dma_entry+0x221/0x280
Code: c0 0f 84 f2 fe ff ff 83 e8 01 89 05 6d 99 11 01 e9 e4 fe ff ff 0f 8e 1f ff ff ff 48 8d 3d 07 ef 2d 01 be 07 00 00 00 48 89 e2 <67> 48 0f b9 3a e9 06 ff ff ff 48 c7 c7 98 05 2b 82 c6 05 72 92 28
RSP: 0018:ff1100010e657970 EFLAGS: 00010002
RAX: 0000000000000007 RBX: ff1100010234eb00 RCX: 0000000000000000
RDX: ff1100010e657970 RSI: 0000000000000007 RDI: ffffffff82678660
RBP: 000000000438c440 R08: 0000000000000228 R09: 0000000000000000
R10: 00000000000001be R11: 000000000000089d R12: 0000000000000800
R13: 00000000ffffffef R14: 0000000000000202 R15: ff1100010234eb00
FS: 00007fb15f3f6740(0000) GS:ff110008dcc19000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb15f32d3a0 CR3: 0000000116f59001 CR4: 0000000000373eb0
Call Trace:
<TASK>
debug_dma_map_sg+0x1b4/0x390
__dma_map_sg_attrs+0x6d/0x1a0
dma_map_sgtable+0x19/0x30
ib_umem_get+0x284/0x3b0 [ib_uverbs]
mlx5_ib_reg_user_mr+0x68/0x2a0 [mlx5_ib]
ib_uverbs_reg_mr+0x17f/0x2a0 [ib_uverbs]
ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0xc2/0x130 [ib_uverbs]
ib_uverbs_cmd_verbs+0xa0b/0xae0 [ib_uverbs]
? ib_uverbs_handler_UVERBS_METHOD_QUERY_PORT_SPEED+0xe0/0xe0 [ib_uverbs]
? mmap_region+0x7a/0xb0
? do_mmap+0x3b8/0x5c0
ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs]
__x64_sys_ioctl+0x14f/0x8b0
? ksys_mmap_pgoff+0xc5/0x190
do_syscall_64+0x8c/0xbf0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7fb15f5e4eed
Code: 04 25 28 00 00 00 48 89 45 c8 31 c0 48 8d 45 10 c7 45 b0 10 00 00 00 48 89 45 b8 48 8d 45 d0 48 89 45 c0 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1a 48 8b 45 c8 64 48 2b 04 25 28 00 00 00
RSP: 002b:00007ffe09a5c540 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffe09a5c5d0 RCX: 00007fb15f5e4eed
RDX: 00007ffe09a5c5f0 RSI: 00000000c0181b01 RDI: 0000000000000003
RBP: 00007ffe09a5c590 R08: 0000000000000028 R09: 00007ffe09a5c794
R10: 0000000000000001 R11: 0000000000000246 R12: 00007ffe09a5c794
R13: 000000000000000c R14: 0000000025a49170 R15: 000000000000000c
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 61868dc55a11 ("dma-mapping: add DMA_ATTR_CPU_CACHE_CLEAN")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260316-dma-debug-overlap-v3-1-1dde90a7f08b@nvidia.com
|
|
When a device performs DMA to a bounce buffer, KMSAN is unaware of
the write and does not mark the data as initialized. When
swiotlb_bounce() later copies the bounce buffer back to the original
buffer, memcpy propagates the uninitialized shadow to the original
buffer, causing false positive uninit-value reports.
Fix this by calling kmsan_unpoison_memory() on the bounce buffer
before copying it back in the DMA_FROM_DEVICE path, so that memcpy
naturally propagates initialized shadow to the destination.
Suggested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/CAG_fn=WUGta-paG1BgsGRoAR+fmuCgh3xo=R3XdzOt_-DqSdHw@mail.gmail.com/
Fixes: 7ade4f10779c ("dma: kmsan: unpoison DMA mappings")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260315082750.2375581-1-syoshida@redhat.com
|
|
Extending these APIs with a flush argument:
dma_direct_unmap_phys(), dma_direct_map_phys(), and
dma_direct_sync_single_for_cpu(). For single-buffer cases, flush=true
would be used, while for SG cases flush=false would be used, followed
by a single flush after all cache operations are issued in
dma_direct_{map,unmap}_sg().
This ultimately benefits dma_map_sg() and dma_unmap_sg().
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tangquan Zheng <zhengtangquan@oppo.com>
Reviewed-by: Leon Romanovsky <leon@kernel.org>
Tested-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
Signed-off-by: Barry Song <baohua@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260228221337.59951-1-21cnbao@gmail.com
|
|
Currently, arch_sync_dma_for_cpu and arch_sync_dma_for_device
always wait for the completion of each DMA buffer. That is,
issuing the DMA sync and waiting for completion is done in a
single API call.
For scatter-gather lists with multiple entries, this means
issuing and waiting is repeated for each entry, which can hurt
performance. Architectures like ARM64 may be able to issue all
DMA sync operations for all entries first and then wait for
completion together.
To address this, arch_sync_dma_for_* now batches DMA operations
and performs a flush afterward. On ARM64, the flush is implemented
with a dsb instruction in arch_sync_dma_flush(). On other
architectures, arch_sync_dma_flush() is currently a nop.
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Tangquan Zheng <zhengtangquan@oppo.com>
Reviewed-by: Juergen Gross <jgross@suse.com> # drivers/xen/swiotlb-xen.c
Tested-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
Signed-off-by: Barry Song <baohua@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260228221316.59934-1-21cnbao@gmail.com
|
|
Support for dma scatter-gather mapping and is intended for testing
mapping performance. It achieves by introducing the dma_sg_map_param
structure and related functions, which enable the implementation of
scatter-gather mapping preparation, mapping, and unmapping operations.
Additionally, the dma_map_benchmark_ops array is updated to include
operations for scatter-gather mapping. This commit aims to provide
a wider range of mapping performance test to cater to different scenarios.
Reviewed-by: Barry Song <baohua@kernel.org>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260225093800.3625054-3-xiaqinxin@huawei.com
|
|
This patch adjusts the DMA map benchmark framework to make the DMA
map benchmark framework more flexible and adaptable to other mapping
modes in the future. By abstracting the framework into five interfaces:
prepare, unprepare, initialize_data, do_map, and do_unmap.
The new map schema can be introduced more easily
without major modifications to the existing code structure.
Reviewed-by: Barry Song <baohua@kernel.org>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260225093800.3625054-2-xiaqinxin@huawei.com
|
|
dma_addr is unitialized in dma_direct_map_phys() when swiotlb is forced
and DMA_ATTR_MMIO is set which leads to random value print out in
warning. Fix that by just returning DMA_MAPPING_ERROR.
Fixes: e53d29f957b3 ("dma-mapping: convert dma_direct_*map_page to be phys_addr_t based")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260209153809.250835-2-jiri@resnulli.us
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping update from Marek Szyprowski:
"A small code cleanup for the DMA-mapping subsystem: removal of unused
hooks (Robin Murphy)"
* tag 'dma-mapping-7.0-2026-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: Remove dma_mark_clean (again)
|
|
Pull virtio updates from Michael Tsirkin:
- in-order support in virtio core
- multiple address space support in vduse
- fixes, cleanups all over the place, notably dma alignment fixes for
non-cache-coherent systems
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (59 commits)
vduse: avoid adding implicit padding
vhost: fix caching attributes of MMIO regions by setting them explicitly
vdpa/mlx5: update MAC address handling in mlx5_vdpa_set_attr()
vdpa/mlx5: reuse common function for MAC address updates
vdpa/mlx5: update mlx_features with driver state check
crypto: virtio: Replace package id with numa node id
crypto: virtio: Remove duplicated virtqueue_kick in virtio_crypto_skcipher_crypt_req
crypto: virtio: Add spinlock protection with virtqueue notification
Documentation: Add documentation for VDUSE Address Space IDs
vduse: bump version number
vduse: add vq group asid support
vduse: merge tree search logic of IOTLB_GET_FD and IOTLB_GET_INFO ioctls
vduse: take out allocations from vduse_dev_alloc_coherent
vduse: remove unused vaddr parameter of vduse_domain_free_coherent
vduse: refactor vdpa_dev_add for goto err handling
vhost: forbid change vq groups ASID if DRIVER_OK is set
vdpa: document set_group_asid thread safety
vduse: return internal vq group struct as map token
vduse: add vq group support
vduse: add v1 API definition
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates for 7.0
- Implement masked user access
- Add bpf support for internal only per-CPU instructions and inline the
bpf_get_smp_processor_id() and bpf_get_current_task() functions
- Fix pSeries MSI-X allocation failure when quota is exceeded
- Fix recursive pci_lock_rescan_remove locking in EEH event handling
- Support tailcalls with subprogs & BPF exceptions on 64bit
- Extend "trusted" keys to support the PowerVM Key Wrapping Module
(PKWM)
Thanks to Abhishek Dubey, Christophe Leroy, Gaurav Batra, Guangshuo Li,
Jarkko Sakkinen, Mahesh Salgaonkar, Mimi Zohar, Miquel Sabaté Solà, Nam
Cao, Narayana Murty N, Nayna Jain, Nilay Shroff, Puranjay Mohan, Saket
Kumar Bhaskar, Sourabh Jain, Srish Srinivasan, and Venkat Rao Bagalkote.
* tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (27 commits)
powerpc/pseries: plpks: export plpks_wrapping_is_supported
docs: trusted-encryped: add PKWM as a new trust source
keys/trusted_keys: establish PKWM as a trusted source
pseries/plpks: add HCALLs for PowerVM Key Wrapping Module
pseries/plpks: expose PowerVM wrapping features via the sysfs
powerpc/pseries: move the PLPKS config inside its own sysfs directory
pseries/plpks: fix kernel-doc comment inconsistencies
powerpc/smp: Add check for kcalloc() failure in parse_thread_groups()
powerpc: kgdb: Remove OUTBUFMAX constant
powerpc64/bpf: Additional NVR handling for bpf_throw
powerpc64/bpf: Support exceptions
powerpc64/bpf: Add arch_bpf_stack_walk() for BPF JIT
powerpc64/bpf: Avoid tailcall restore from trampoline
powerpc64/bpf: Support tailcalls with subprogs
powerpc64/bpf: Moving tail_call_cnt to bottom of frame
powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling
powerpc/pseries: Fix MSI-X allocation failure when quota is exceeded
powerpc/iommu: bypass DMA APIs for coherent allocations for pre-mapped memory
powerpc64/bpf: Inline bpf_get_smp_processor_id() and bpf_get_current_task/_btf()
powerpc64/bpf: Support internal-only MOV instruction to resolve per-CPU addrs
...
|
|
Commit 8f1fc1bf1a3d ("dma: contiguous: Reserve default CMA heap")
introduced a bug where dma_heap_cma_register_heap() is called with
a NULL pointer when dma_contiguous_reserve_area() fails to reserve
the CMA area.
When dma_contiguous_reserve_area() fails, dma_contiguous_default_area
remains NULL (initialized as a global variable), but the code doesn't
check the return value and proceeds to call dma_heap_cma_register_heap()
with this NULL pointer.
Later during boot, add_cma_heaps() iterates through the dma_areas[]
array and attempts to register heaps. When it encounters the NULL
pointer stored by the earlier call, it crashes in __add_cma_heap()
-> dma_heap_add() when trying to dereference the NULL CMA pointer.
The crash manifests as:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000038
...
Call trace:
dma_heap_add+0x40/0x2b0
__add_cma_heap+0x80/0xe0
add_cma_heaps+0x64/0xb0
do_one_initcall+0x60/0x318
kernel_init_freeable+0x260/0x2f0
kernel_init+0x2c/0x168
ret_from_fork+0x10/0x20
Fix this by checking the return value of dma_contiguous_reserve_area()
and only calling dma_heap_cma_register_heap() when the reservation
succeeds.
Fixes: 8f1fc1bf1a3d ("dma: contiguous: Reserve default CMA heap")
Signed-off-by: Shanker Donthineni <sdonthineni@nvidia.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260129181317.2429196-1-sdonthineni@nvidia.com
|
|
Currently, dma_alloc_from_pool() unconditionally warns and dumps a stack
trace when an allocation fails, with the message "Failed to get suitable
pool".
This conflates two distinct failure modes:
1. Configuration error: No atomic pool is available for the requested
DMA mask (a fundamental system setup issue)
2. Resource Exhaustion: A suitable pool exists but is currently full (a
recoverable runtime state)
This lack of distinction prevents drivers from using __GFP_NOWARN to
suppress error messages during temporary pressure spikes, such as when
awaiting synchronous reclaim of descriptors.
Refactor the error handling to distinguish these cases:
- If no suitable pool is found, keep the unconditional WARN regarding
the missing pool.
- If a pool was found but is exhausted, respect __GFP_NOWARN and update
the warning message to explicitly state "DMA pool exhausted".
Fixes: 9420139f516d ("dma-pool: fix coherent pool allocations for IOMMU mappings")
Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260128133554.3056582-1-s-adivi@ti.com
|
|
When initializing the default cma region, the "cma=" kernel parameter
takes priority over a DT defined linux,cma-default region. Hence, give
the reserved_mem framework the ability to detect this so that the DT
defined cma region can skip initialization accordingly.
Signed-off-by: Oreoluwa Babatunde <oreoluwa.babatunde@oss.qualcomm.com>
Tested-by: Joy Zou <joy.zou@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Fixes: 8a6e02d0c00e ("of: reserved_mem: Restructure how the reserved memory regions are processed")
Fixes: 2c223f7239f3 ("of: reserved_mem: Restructure call site for dma_contiguous_early_fixup()")
Link: https://lore.kernel.org/r/20251210002027.1171519-1-oreoluwa.babatunde@oss.qualcomm.com
[mszyprow: rebased onto v6.19-rc1, added fixes tags, added a stub for
cma_skip_dt_default_reserved_mem() if no CONFIG_DMA_CMA is set]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
|
On smaller systems, e.g. embedded arm64, it is common for all memory
to end up in ZONE_DMA32 or even ZONE_DMA. In such cases it is redundant
to allocate a nominal pool for an empty higher zone that just ends up
coming from a lower zone that should already have its own pool anyway.
We already have logic to skip allocating a ZONE_DMA pool when that is
empty, so generalise that to save memory in the case of other zones too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/8ab8d8a620dee0109f33f5cb63d6bfeed35aac37.1768230104.git.robin.murphy@arm.com
|
|
If CONFIG_ZONE_DMA32 is enabled, but we have not allocated the
corresponding atomic_pool_dma32, dma_guess_pool() may return the NULL
value of that and fail a GFP_DMA32 allocation without trying to fall
back to other pools which may exist. Furthermore, if no GFP_DMA pool
exists, it is preferable to try GFP_DMA32 rather than immediately fall
back to GFP_KERNEL with even less chance of success. Improve matters
by encoding an explicit order of pool preference for each flag.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/c846b1a2f43295cac926c7af2ce907f62baec518.1768230104.git.robin.murphy@arm.com
|
|
With IA-64 now gone, there are no users of the dma_mark_clean hook,
so we can retire it for good.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/c004927f01962726ff1dcf94d1b4efff84db805a.1767727673.git.robin.murphy@arm.com
|
|
Leverage ARCH_HAS_DMA_MAP_DIRECT config option for coherent allocations as
well. This will bypass DMA ops for memory allocations that have been
pre-mapped.
Always set device bus_dma_limit when memory is pre-mapped. In some
architectures, like PowerPC, pmemory can be converted to regular memory via
daxctl command. This will gate the coherent allocations to pre-mapped RAM
only, by dma_coherent_ok().
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251107161105.85999-1-gbatra@linux.ibm.com
|
|
If a driver is buggy and has 2 overlapping mappings but only
sets cache clean flag on the 1st one of them, we warn.
But if it only does it for the 2nd one, we don't.
Fix by tracking cache clean flag in the entry.
Message-ID: <0ffb3513d18614539c108b4548cdfbc64274a7d1.1767601130.git.mst@redhat.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When multiple small DMA_FROM_DEVICE or DMA_BIDIRECTIONAL buffers share a
cacheline, and DMA_API_DEBUG is enabled, we get this warning:
cacheline tracking EEXIST, overlapping mappings aren't supported.
This is because when one of the mappings is removed, while another one
is active, CPU might write into the buffer.
Add an attribute for the driver to promise not to do this, making the
overlapping safe, and suppressing the warning.
Message-ID: <2d5d091f9d84b68ea96abd545b365dd1d00bbf48.1767601130.git.mst@redhat.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- last minute fix for missing parenthesis in recently merged code (Hans
de Goede)
- removal of excessive, non-fatal warnings (Dave Kleikamp)
* tag 'dma-mapping-6.19-2025-12-10' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: Fix DMA_BIT_MASK() macro being broken
dma/pool: eliminate alloc_pages warning in atomic_pool_expand
|
|
atomic_pool_expand iteratively tries the allocation while decrementing
the page order. There is no need to issue a warning if an attempted
allocation fails.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Fixes: d7e673ec2c8e ("dma-pool: Only allocate from CMA when in same memory zone")
[mszyprow: fixed typo]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251202152810.142370-1-dave.kleikamp@oracle.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- More DMA mapping API refactoring to physical addresses as the primary
interface instead of page+offset parameters.
This time dma_map_ops callbacks are converted to physical addresses,
what in turn results also in some simplification of architecture
specific code (Leon Romanovsky and Jason Gunthorpe)
- Clarify that dma_map_benchmark is not a kernel self-test, but
standalone tool (Qinxin Xia)
* tag 'dma-mapping-6.19-2025-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: remove unused map_page callback
xen: swiotlb: Convert mapping routine to rely on physical address
x86: Use physical address for DMA mapping
sparc: Use physical address DMA mapping
powerpc: Convert to physical address DMA mapping
parisc: Convert DMA map_page to map_phys interface
MIPS/jazzdma: Provide physical address directly
alpha: Convert mapping routine to rely on physical address
dma-mapping: remove unused mapping resource callbacks
xen: swiotlb: Switch to physical address mapping callbacks
ARM: dma-mapping: Switch to physical address mapping callbacks
ARM: dma-mapping: Reduce struct page exposure in arch_sync_dma*()
dma-mapping: convert dummy ops to physical address mapping
dma-mapping: prepare dma_map_ops to conversion to physical address
tools/dma: move dma_map_benchmark from selftests to tools/dma
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups |
