| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Rename the "async" ioctl API to "unlocked" so that upcoming usage in x86's
TDX code doesn't result in a massive misnomer. To avoid having to retry
SEAMCALLs, TDX needs to acquire kvm->lock *and* all vcpu->mutex locks, and
acquiring all of those locks after/inside the current vCPU's mutex is a
non-starter. However, TDX also needs to acquire the vCPU's mutex and load
the vCPU, i.e. the handling is very much not async to the vCPU.
No functional change intended.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20251030200951.3402865-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Implement kvm_arch_vcpu_async_ioctl() "natively" in x86 and arm64 instead
of relying on an #ifdef'd stub, and drop HAVE_KVM_VCPU_ASYNC_IOCTL in
anticipation of using the API on x86. Once x86 uses the API, providing a
stub for one architecture and having all other architectures opt-in
requires more code than simply implementing the API in the lone holdout.
Eliminating the Kconfig will also reduce churn if the API is renamed in
the future (spoiler alert).
No functional change intended.
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Kai Huang <kai.huang@intel.com>
Link: https://patch.msgid.link/20251030200951.3402865-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
|
|
Allow mmap() on guest_memfd instances for x86 VMs with private memory as
the need to track private vs. shared state in the guest_memfd instance is
only pertinent to INIT_SHARED. Doing mmap() on private memory isn't
terrible useful (yet!), but it's now possible, and will be desirable when
guest_memfd gains support for other VMA-based syscalls, e.g. mbind() to
set NUMA policy.
Lift the restriction now, before MMAP support is officially released, so
that KVM doesn't need to add another capability to enumerate support for
mmap() on private memory.
Fixes: 3d3a04fad25a ("KVM: Allow and advertise support for host mmap() on guest_memfd files")
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv updates from Wei Liu:
- Unify guest entry code for KVM and MSHV (Sean Christopherson)
- Switch Hyper-V MSI domain to use msi_create_parent_irq_domain()
(Nam Cao)
- Add CONFIG_HYPERV_VMBUS and limit the semantics of CONFIG_HYPERV
(Mukesh Rathor)
- Add kexec/kdump support on Azure CVMs (Vitaly Kuznetsov)
- Deprecate hyperv_fb in favor of Hyper-V DRM driver (Prasanna
Kumar T S M)
- Miscellaneous enhancements, fixes and cleanups (Abhishek Tiwari,
Alok Tiwari, Nuno Das Neves, Wei Liu, Roman Kisel, Michael Kelley)
* tag 'hyperv-next-signed-20251006' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyperv: Remove the spurious null directive line
MAINTAINERS: Mark hyperv_fb driver Obsolete
fbdev/hyperv_fb: deprecate this in favor of Hyper-V DRM driver
Drivers: hv: Make CONFIG_HYPERV bool
Drivers: hv: Add CONFIG_HYPERV_VMBUS option
Drivers: hv: vmbus: Fix typos in vmbus_drv.c
Drivers: hv: vmbus: Fix sysfs output format for ring buffer index
Drivers: hv: vmbus: Clean up sscanf format specifier in target_cpu_store()
x86/hyperv: Switch to msi_create_parent_irq_domain()
mshv: Use common "entry virt" APIs to do work in root before running guest
entry: Rename "kvm" entry code assets to "virt" to genericize APIs
entry/kvm: KVM: Move KVM details related to signal/-EINTR into KVM proper
mshv: Handle NEED_RESCHED_LAZY before transferring to guest
x86/hyperv: Add kexec/kdump support on Azure CVMs
Drivers: hv: Simplify data structures for VMBus channel close message
Drivers: hv: util: Cosmetic changes for hv_utils_transport.c
mshv: Add support for a new parent partition configuration
clocksource: hyper-v: Skip unnecessary checks for the root partition
hyperv: Add missing field to hv_output_map_device_interrupt
|
|
Rename the "kvm" entry code files and Kconfigs to use generic "virt"
nomenclature so that the code can be reused by other hypervisors (or
rather, their root/dom0 partition drivers), without incorrectly suggesting
the code somehow relies on and/or involves KVM.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Move KVM's morphing of pending signals into userspace exits into KVM
proper, and drop the @vcpu param from xfer_to_guest_mode_handle_work().
How KVM responds to -EINTR is a detail that really belongs in KVM itself,
and invoking kvm_handle_signal_exit() from kernel code creates an inverted
module dependency. E.g. attempting to move kvm_handle_signal_exit() into
kvm_main.c would generate an linker error when building kvm.ko as a module.
Dropping KVM details will also converting the KVM "entry" code into a more
generic virtualization framework so that it can be used when running as a
Hyper-V root partition.
Lastly, eliminating usage of "struct kvm_vcpu" outside of KVM is also nice
to have for KVM x86 developers, as keeping the details of kvm_vcpu purely
within KVM allows changing the layout of the structure without having to
boot into a new kernel, e.g. allows rebuilding and reloading kvm.ko with a
modified kvm_vcpu structure as part of debug/development.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.18
- Add support for FF-A 1.2 as the secure memory conduit for pKVM,
allowing more registers to be used as part of the message payload.
- Change the way pKVM allocates its VM handles, making sure that the
privileged hypervisor is never tricked into using uninitialised
data.
- Speed up MMIO range registration by avoiding unnecessary RCU
synchronisation, which results in VMs starting much quicker.
- Add the dump of the instruction stream when panic-ing in the EL2
payload, just like the rest of the kernel has always done. This will
hopefully help debugging non-VHE setups.
- Add 52bit PA support to the stage-1 page-table walker, and make use
of it to populate the fault level reported to the guest on failing
to translate a stage-1 walk.
- Add NV support to the GICv3-on-GICv5 emulation code, ensuring
feature parity for guests, irrespective of the host platform.
- Fix some really ugly architecture problems when dealing with debug
in a nested VM. This has some bad performance impacts, but is at
least correct.
- Add enough infrastructure to be able to disable EL2 features and
give effective values to the EL2 control registers. This then allows
a bunch of features to be turned off, which helps cross-host
migration.
- Large rework of the selftest infrastructure to allow most tests to
transparently run at EL2. This is the first step towards enabling
NV testing.
- Various fixes and improvements all over the map, including one BE
fix, just in time for the removal of the feature.
|
|
Device MMIO registration may happen quite frequently during VM boot,
and the SRCU synchronization each time has a measurable effect
on VM startup time. In our experiments it can account for around 25%
of a VM's startup time.
Replace the synchronization with a deferred free of the old kvm_io_bus
structure.
Tested-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Keir Fraser <keirf@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
This ensures that, if a VCPU has "observed" that an IO registration has
occurred, the instruction currently being trapped or emulated will also
observe the IO registration.
At the same time, enforce that kvm_get_bus() is used only on the
update side, ensuring that a long-term reference cannot be obtained by
an SRCU reader.
Signed-off-by: Keir Fraser <keirf@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add a new internal flag, KVM_MEMSLOT_GMEM_ONLY, to the top half of
memslot->flags (which makes it strictly for KVM's internal use). This
flag tracks when a guest_memfd-backed memory slot supports host
userspace mmap operations, which implies that all memory, not just
private memory for CoCo VMs, is consumed through guest_memfd: "gmem
only".
This optimization avoids repeatedly checking the underlying guest_memfd
file for mmap support, which would otherwise require taking and
releasing a reference on the file for each check. By caching this
information directly in the memslot, we reduce overhead and simplify the
logic involved in handling guest_memfd-backed pages for host mappings.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Introduce the core infrastructure to enable host userspace to mmap()
guest_memfd-backed memory. This is needed for several evolving KVM use
cases:
* Non-CoCo VM backing: Allows VMMs like Firecracker to run guests
entirely backed by guest_memfd, even for non-CoCo VMs [1]. This
provides a unified memory management model and simplifies guest memory
handling.
* Direct map removal for enhanced security: This is an important step
for direct map removal of guest memory [2]. By allowing host userspace
to fault in guest_memfd pages directly, we can avoid maintaining host
kernel direct maps of guest memory. This provides additional hardening
against Spectre-like transient execution attacks by removing a
potential attack surface within the kernel.
* Future guest_memfd features: This also lays the groundwork for future
enhancements to guest_memfd, such as supporting huge pages and
enabling in-place sharing of guest memory with the host for CoCo
platforms that permit it [3].
Enable the basic mmap and fault handling logic within guest_memfd, but
hold off on allow userspace to actually do mmap() until the architecture
support is also in place.
[1] https://github.com/firecracker-microvm/firecracker/tree/feature/secret-hiding
[2] https://lore.kernel.org/linux-mm/cc1bb8e9bc3e1ab637700a4d3defeec95b55060a.camel@amazon.com
[3] https://lore.kernel.org/all/c1c9591d-218a-495c-957b-ba356c8f8e09@redhat.com/T/#u
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Acked-by: David Hildenbrand <david@redhat.com>
Co-developed-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Enable KVM_GUEST_MEMFD for all KVM x86 64-bit builds, i.e. for "default"
VM types when running on 64-bit KVM. This will allow using guest_memfd
to back non-private memory for all VM shapes, by supporting mmap() on
guest_memfd.
Opportunistically clean up various conditionals that become tautologies
once x86 selects KVM_GUEST_MEMFD more broadly. Specifically, because
SW protected VMs, SEV, and TDX are all 64-bit only, private memory no
longer needs to take explicit dependencies on KVM_GUEST_MEMFD, because
it is effectively a prerequisite.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The comment that points to the path where the user-visible memslot flags
are refers to an outdated path and has a typo.
Update the comment to refer to the correct path.
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix comments so that they refer to slots_lock instead of slots_locks
(remove trailing s).
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename kvm_slot_can_be_private() to kvm_slot_has_gmem() to improve
clarity and accurately reflect its purpose.
The function kvm_slot_can_be_private() was previously used to check if a
given kvm_memory_slot is backed by guest_memfd. However, its name
implied that the memory in such a slot was exclusively "private".
As guest_memfd support expands to include non-private memory (e.g.,
shared host mappings), it's important to remove this association. The
new name, kvm_slot_has_gmem(), states that the slot is backed by
guest_memfd without making assumptions about the memory's privacy
attributes.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The original name was vague regarding its functionality. This Kconfig
option specifically enables and gates the kvm_gmem_populate() function,
which is responsible for populating a GPA range with guest data.
The new name, HAVE_KVM_ARCH_GMEM_POPULATE, describes the purpose of the
option: to enable arch-specific guest_memfd population mechanisms. It
also follows the same pattern as the other HAVE_KVM_ARCH_* configuration
options.
This improves clarity for developers and ensures the name accurately
reflects the functionality it controls, especially as guest_memfd
support expands beyond purely "private" memory scenarios.
Temporarily keep KVM_GENERIC_PRIVATE_MEM as an x86-only config so as to
minimize churn, and to hopefully make it easier to see what features
require HAVE_KVM_ARCH_GMEM_POPULATE. On that note, omit GMEM_POPULATE
for KVM_X86_SW_PROTECTED_VM, as regular ol' memset() suffices for
software-protected VMs.
As for KVM_GENERIC_PRIVATE_MEM, a future change will select KVM_GUEST_MEMFD
for all 64-bit KVM builds, at which point the intermediate config will
become obsolete and can/will be dropped.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rename the Kconfig option CONFIG_KVM_PRIVATE_MEM to
CONFIG_KVM_GUEST_MEMFD. The original name implied that the feature only
supported "private" memory. However, CONFIG_KVM_PRIVATE_MEM enables
guest_memfd in general, which is not exclusively for private memory.
Subsequent patches in this series will add guest_memfd support for
non-CoCo VMs, whose memory is not private.
Renaming the Kconfig option to CONFIG_KVM_GUEST_MEMFD more accurately
reflects its broader scope as the main Kconfig option for all
guest_memfd-backed memory. This provides clearer semantics for the
option and avoids confusion as new features are introduced.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shivank Garg <shivankg@amd.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250729225455.670324-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Drop kvm_arch_{start,end}_assignment() and all associated code now that
KVM x86 no longer consumes assigned_device_count. Tracking whether or not
a VFIO-assigned device is formally associated with a VM is fundamentally
flawed, as such an association is optional for general usage, i.e. is prone
to false negatives. E.g. prior to commit 2edd9cb79fb3 ("kvm: detect
assigned device via irqbypass manager"), device passthrough via VFIO would
fail to enable IRQ bypass if userspace omitted the formal VFIO<=>KVM
binding.
And device drivers that *need* the VFIO<=>KVM connection, e.g. KVM-GT,
shouldn't be relying on generic x86 tracking infrastructure.
Cc: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250523011756.3243624-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Fold kvm_arch_irqfd_route_changed() into kvm_arch_update_irqfd_routing().
Calling arch code to know whether or not to call arch code is absurd.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250611224604.313496-35-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Don't bother WARNing if updating an IRTE route fails now that vendor code
provides much more precise WARNs. The generic WARN doesn't provide enough
information to actually debug the problem, and has obviously done nothing
to surface the myriad bugs in KVM x86's implementation.
Drop all of the associated return code plumbing that existed just so that
common KVM could WARN.
Link: https://lore.kernel.org/r/20250611224604.313496-34-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
When updating IRTEs in response to a GSI routing or IRQ bypass change,
pass the new/current routing information along with the associated irqfd.
This will allow KVM x86 to harden, simplify, and deduplicate its code.
Since adding/removing a bypass producer is now conveniently protected with
irqfds.lock, i.e. can't run concurrently with kvm_irq_routing_update(),
use the routing information cached in the irqfd instead of looking up
the information in the current GSI routing tables.
Opportunistically convert an existing printk() to pr_info() and put its
string onto a single line (old code that strictly adhered to 80 chars).
Link: https://lore.kernel.org/r/20250611224604.313496-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a Kconfig to allow building KVM without support for emulating a I/O
APIC, PIC, and PIT, which is desirable for deployments that effectively
don't support a fully in-kernel IRQ chip, i.e. never expect any VMM to
create an in-kernel I/O APIC. E.g. compiling out support eliminates a few
thousand lines of guest-facing code and gives security folks warm fuzzies.
As a bonus, wrapping relevant paths with CONFIG_KVM_IOAPIC #ifdefs makes
it much easier for readers to understand which bits and pieces exist
specifically for fully in-kernel IRQ chips.
Opportunistically convert all two in-kernel uses of __KVM_HAVE_IOAPIC to
CONFIG_KVM_IOAPIC, e.g. rather than add a second #ifdef to generate a stub
for kvm_arch_post_irq_routing_update().
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250611213557.294358-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Hardcode the PIT's source IRQ ID to '2' instead of "finding" that bit 2
is always the first available bit in irq_sources_bitmap. Bits 0 and 1 are
set/reserved by kvm_arch_init_vm(), i.e. long before kvm_create_pit() can
be invoked, and KVM allows at most one in-kernel PIT instance, i.e. it's
impossible for the PIT to find a different free bit (there are no other
users of kvm_request_irq_source_id().
Delete the now-defunct irq_sources_bitmap and all its associated code.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250611213557.294358-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Move kvm_{request,free}_irq_source_id() to i8254.c, i.e. the dedicated PIT
emulation file, in anticipation of removing them entirely in favor of
hardcoding the PIT's "requested" source ID (the source ID can only ever be
'2', and the request can never fail).
No functional change intended.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250611213557.294358-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Trigger the I/O APIC route rescan that's performed for a split IRQ chip
after userspace updates IRQ routes in kvm_arch_irq_routing_update(), i.e.
before dropping kvm->irq_lock. Calling kvm_make_all_cpus_request() under
a mutex is perfectly safe, and the smp_wmb()+smp_mb__after_atomic() pair
in __kvm_make_request()+kvm_check_request() ensures the new routing is
visible to vCPUs prior to the request being visible to vCPUs.
In all likelihood, commit b053b2aef25d ("KVM: x86: Add EOI exit bitmap
inference") somewhat arbitrarily made the request outside of irq_lock to
avoid holding irq_lock any longer than is strictly necessary. And then
commit abdb080f7ac8 ("kvm/irqchip: kvm_arch_irq_routing_update renaming
split") took the easy route of adding another arch hook instead of risking
a functional change.
Note, the call to synchronize_srcu_expedited() does NOT provide ordering
guarantees with respect to vCPUs scanning the new routing; as above, the
request infrastructure provides the necessary ordering. I.e. there's no
need to wait for kvm_scan_ioapic_routes() to complete if it's actively
running, because regardless of whether it grabs the old or new table, the
vCPU will have another KVM_REQ_SCAN_IOAPIC pending, i.e. will rescan again
and see the new mappings.
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20250611213557.294358-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Introduce new mutex locking functions mutex_trylock_nest_lock() and
mutex_lock_killable_nest_lock() and use them to clean up locking
of all vCPUs for a VM.
For x86, this removes some complex code that was used instead
of lockdep's "nest_lock" feature.
For ARM and RISC-V, this removes a lockdep warning when the VM is
configured to have more than MAX_LOCK_DEPTH vCPUs, and removes a fair
amount of duplicate code by sharing the logic across all architectures.
Signed-off-by: Paolo BOnzini <pbonzini@redhat.com>
|
|
In a few cases, usually in the initialization code, KVM locks all vCPUs
of a VM to ensure that userspace doesn't do funny things while KVM performs
an operation that affects the whole VM.
Until now, all these operations were implemented using custom code,
and all of them share the same problem:
Lockdep can't cope with simultaneous locking of a large number of locks of
the same class.
However if these locks are taken while another lock is already held,
which is luckily the case, it is possible to take advantage of little known
_nest_lock feature of lockdep which allows in this case to have an
unlimited number of locks of same class to be taken.
To implement this, create two functions:
kvm_lock_all_vcpus() and kvm_trylock_all_vcpus()
Both functions are needed because some code that will be replaced in
the subsequent patches, uses mutex_trylock, instead of regular mutex_lock.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Message-ID: <20250512180407.659015-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
An AP destroy request for a target vCPU is typically followed by an
RMPADJUST to remove the VMSA attribute from the page currently being
used as the VMSA for the target vCPU. This can result in a vCPU that
is about to VMRUN to exit with #VMEXIT_INVALID.
This usually does not happen as APs are typically sitting in HLT when
being destroyed and therefore the vCPU thread is not running at the time.
However, if HLT is allowed inside the VM, then the vCPU could be about to
VMRUN when the VMSA attribute is removed from the VMSA page, resulting in
a #VMEXIT_INVALID when the vCPU actually issues the VMRUN and causing the
guest to crash. An RMPADJUST against an in-use (already running) VMSA
results in a #NPF for the vCPU issuing the RMPADJUST, so the VMSA
attribute cannot be changed until the VMRUN for target vCPU exits. The
Qemu command line option '-overcommit cpu-pm=on' is an example of allowing
HLT inside the guest.
Update the KVM_REQ_UPDATE_PROTECTED_GUEST_STATE event to include the
KVM_REQUEST_WAIT flag. The kvm_vcpu_kick() function will not wait for
requests to be honored, so create kvm_make_request_and_kick() that will
add a new event request and honor the KVM_REQUEST_WAIT flag. This will
ensure that the target vCPU sees the AP destroy request before returning
to the initiating vCPU should the target vCPU be in guest mode.
Fixes: e366f92ea99e ("KVM: SEV: Support SEV-SNP AP Creation NAE event")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/fe2c885bf35643dd224e91294edb6777d5df23a4.1743097196.git.thomas.lendacky@amd.com
[sean: add a comment explaining the use of smp_send_reschedule()]
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
This large commit contains the initial support for TDX in KVM. All x86
parts enable the host-side hypercalls that KVM uses to talk to the TDX
module, a software component that runs in a special CPU mode called SEAM
(Secure Arbitration Mode).
The series is in turn split into multiple sub-series, each with a separate
merge commit:
- Initialization: basic setup for using the TDX module from KVM, plus
ioctls to create TDX VMs and vCPUs.
- MMU: in TDX, private and shared halves of the address space are mapped by
different EPT roots, and the private half is managed by the TDX module.
Using the support that was added to the generic MMU code in 6.14,
add support for TDX's secure page tables to the Intel side of KVM.
Generic KVM code takes care of maintaining a mirror of the secure page
tables so that they can be queried efficiently, and ensuring that changes
are applied to both the mirror and the secure EPT.
- vCPU enter/exit: implement the callbacks that handle the entry of a TDX
vCPU (via the SEAMCALL TDH.VP.ENTER) and the corresponding save/restore
of host state.
- Userspace exits: introduce support for guest TDVMCALLs that KVM forwards to
userspace. These correspond to the usual KVM_EXIT_* "heavyweight vmexits"
but are triggered through a different mechanism, similar to VMGEXIT for
SEV-ES and SEV-SNP.
- Interrupt handling: support for virtual interrupt injection as well as
handling VM-Exits that are caused by vectored events. Exclusive to
TDX are machine-check SMIs, which the kernel already knows how to
handle through the kernel machine check handler (commit 7911f145de5f,
"x86/mce: Implement recovery for errors in TDX/SEAM non-root mode")
- Loose ends: handling of the remaining exits from the TDX module, including
EPT violation/misconfig and several TDVMCALL leaves that are handled in
the kernel (CPUID, HLT, RDMSR/WRMSR, GetTdVmCallInfo); plus returning
an error or ignoring operations that are not supported by TDX guests
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Convert HAVE_KVM_IRQ_BYPASS into a tristate so that selecting
IRQ_BYPASS_MANAGER follows KVM={m,y}, i.e. doesn't force irqbypass.ko to
be built-in.
Note, PPC allows building KVM as a module, but selects HAVE_KVM_IRQ_BYPASS
from a boolean Kconfig, i.e. KVM PPC unnecessarily forces irqbpass.ko to
be built-in. But that flaw is a longstanding PPC specific issue.
Fixes: 61df71ee992d ("kvm: move "select IRQ_BYPASS_MANAGER" to common code")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250315024623.2363994-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The immediate issue being fixed here is a nVMX bug where KVM fails to
detect that, after nested VM-Exit, L1 has a pending IRQ (or NMI).
However, checking for a pending interrupt accesses the legacy PIC, and
x86's kvm_arch_destroy_vm() currently frees the PIC before destroying
vCPUs, i.e. checking for IRQs during the forced nested VM-Exit results
in a NULL pointer deref; that's a prerequisite for the nVMX fix.
The remaining patches attempt to bring a bit of sanity to x86's VM
teardown code, which has accumulated a lot of cruft over the years. E.g.
KVM currently unloads each vCPU's MMUs in a separate operation from
destroying vCPUs, all because when guest SMP support was added, KVM had a
kludgy MMU teardown flow that broke when a VM had more than one 1 vCPU.
And that oddity lived on, for 18 years...
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move pv_unhalted check out of kvm_vcpu_has_events(), check pv_unhalted
explicitly when handling PV unhalt and expose kvm_vcpu_has_events().
kvm_vcpu_has_events() returns true if pv_unhalted is set, and pv_unhalted
is only cleared on transitions to KVM_MP_STATE_RUNNABLE. If the guest
initiates a spurious wakeup, pv_unhalted could be left set in perpetuity.
Currently, this is not problematic because kvm_vcpu_has_events() is only
called when handling PV unhalt. However, if kvm_vcpu_has_events() is used
for other purposes in the future, it could return the unexpected results.
Export kvm_vcpu_has_events() for its usage in broader contexts.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Message-ID: <20250222014225.897298-3-binbin.wu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Before KVM can use TDX to create and run TDX guests, TDX needs to be
initialized from two perspectives: 1) TDX module must be initialized
properly to a working state; 2) A per-cpu TDX initialization, a.k.a the
TDH.SYS.LP.INIT SEAMCALL must be done on any logical cpu before it can
run any other TDX SEAMCALLs.
The TDX host core-kernel provides two functions to do the above two
respectively: tdx_enable() and tdx_cpu_enable().
There are two options in terms of when to initialize TDX: initialize TDX
at KVM module loading time, or when creating the first TDX guest.
Choose to initialize TDX during KVM module loading time:
Initializing TDX module is both memory and CPU time consuming: 1) the
kernel needs to allocate a non-trivial size(~1/256) of system memory
as metadata used by TDX module to track each TDX-usable memory page's
status; 2) the TDX module needs to initialize this metadata, one entry
for each TDX-usable memory page.
Also, the kernel uses alloc_contig_pages() to allocate those metadata
chunks, because they are large and need to be physically contiguous.
alloc_contig_pages() can fail. If initializing TDX when creating the
first TDX guest, then there's chance that KVM won't be able to run any
TDX guests albeit KVM _declares_ to be able to support TDX.
This isn't good for the user.
On the other hand, initializing TDX at KVM module loading time can make
sure KVM is providing a consistent view of whether KVM can support TDX
to the user.
Always only try to initialize TDX after VMX has been initialized. TDX
is based on VMX, and if VMX fails to initialize then TDX is likely to be
broken anyway. Also, in practice, supporting TDX will require part of
VMX and common x86 infrastructure in working order, so TDX cannot be
enabled alone w/o VMX support.
There are two cases that can result in failure to initialize TDX: 1) TDX
cannot be supported (e.g., because of TDX is not supported or enabled by
hardware, or module is not loaded, or missing some dependency in KVM's
configuration); 2) Any unexpected error during TDX bring-up. For the
first case only mark TDX is disabled but still allow KVM module to be
loaded. For the second case just fail to load the KVM module so that
the user can be aware.
Because TDX costs additional memory, don't enable TDX by default. Add a
new module parameter 'enable_tdx' to allow the user to opt-in.
Note, the name tdx_init() has already been taken by the early boot code.
Use tdx_bringup() for initializing TDX (and tdx_cleanup() since KVM
doesn't actually teardown TDX). They don't match vt_init()/vt_exit(),
vmx_init()/vmx_exit() etc but it's not end of the world.
Also, once initialized, the TDX module cannot be disabled and enabled
again w/o the TDX module runtime update, which isn't supported by the
kernel. After TDX is enabled, nothing needs to be done when KVM
disables hardware virtualization, e.g., when offlining CPU, or during
suspend/resume. TDX host core-kernel code internally tracks TDX status
and can handle "multiple enabling" scenario.
Similar to KVM_AMD_SEV, add a new KVM_INTEL_TDX Kconfig to guide KVM TDX
code. Make it depend on INTEL_TDX_HOST but not replace INTEL_TDX_HOST
because in the longer term there's a use case that requires making
SEAMCALLs w/o KVM as mentioned by Dan [1].
Link: https://lore.kernel.org/6723fc2070a96_60c3294dc@dwillia2-mobl3.amr.corp.intel.com.notmuch/ [1]
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-ID: <162f9dee05c729203b9ad6688db1ca2960b4b502.1731664295.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
To support TDX, KVM will need to enable TDX during KVM module loading
time. Enabling TDX requires enabling hardware virtualization first so
that all online CPUs (and the new CPU going online) are in post-VMXON
state.
KVM by default enables hardware virtualization but that is done in
kvm_init(), which must be the last step after all initialization is done
thus is too late for enabling TDX.
Export functions to enable/disable hardware virtualization so that TDX
code can use them to handle hardware virtualization enabling before
kvm_init().
Signed-off-by: Kai Huang <kai.huang@intel.com>
Message-ID: <dfe17314c0d9978b7bc3b0833dff6f167fbd28f5.1731664295.git.kai.huang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove kvm_arch_sync_events() now that x86 no longer uses it (no other
arch has ever used it).
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250224235542.2562848-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It is possible to correctly do aging without taking the KVM MMU lock,
or while taking it for read; add a Kconfig to let architectures do so.
Architectures that select KVM_MMU_LOCKLESS_AGING are responsible for
correctness.
Suggested-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20250204004038.1680123-3-jthoughton@google.com
[sean: massage shortlog+changelog, fix Kconfig goof and shorten name]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
The only statement in a kvm_arch_post_init_vm implementation
can be moved into the x86 kvm_arch_init_vm. Do so and remove all
traces from architecture-independent code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
As part of enabling TDX virtual machines, support support separation of
private/shared EPT into separate roots.
Confidential computing solutions almost invariably have concepts of
private and shared memory, but they may different a lot in the details.
In SEV, for example, the bit is handled more like a permission bit as
far as the page tables are concerned: the private/shared bit is not
included in the physical address.
For TDX, instead, the bit is more like a physical address bit, with
the host mapping private memory in one half of the address space and
shared in another. Furthermore, the two halves are mapped by different
EPT roots and only the shared half is managed by KVM; the private half
(also called Secure EPT in Intel documentation) gets managed by the
privileged TDX Module via SEAMCALLs.
As a result, the operations that actually change the private half of
the EPT are limited and relatively slow compared to reading a PTE. For
this reason the design for KVM is to keep a mirror of the private EPT in
host memory. This allows KVM to quickly walk the EPT and only perform the
slower private EPT operations when it needs to actually modify mid-level
private PTEs.
There are thus three sets of EPT page tables: external, mirror and
direct. In the case of TDX (the only user of this framework) the
first two cover private memory, whereas the third manages shared
memory:
external EPT - Hidden within the TDX module, modified via TDX module
calls.
mirror EPT - Bookkeeping tree used as an optimization by KVM, not
used by the processor.
direct EPT - Normal EPT that maps unencrypted shared memory.
Managed like the EPT of a normal VM.
Modifying external EPT
----------------------
Modifications to the mirrored page tables need to also perform the
same operations to the private page tables, which will be handled via
kvm_x86_ops. Although this prep series does not interact with the TDX
module at all to actually configure the private EPT, it does lay the
ground work for doing this.
In some ways updating the private EPT is as simple as plumbing PTE
modifications through to also call into the TDX module; however, the
locking is more complicated because inserting a single PTE cannot anymore
be done atomically with a single CMPXCHG. For this reason, the existing
FROZEN_SPTE mechanism is used whenever a call to the TDX module updates the
private EPT. FROZEN_SPTE acts basically as a spinlock on a PTE. Besides
protecting operation of KVM, it limits the set of cases in which the
TDX module will encounter contention on its own PTE locks.
Zapping external EPT
--------------------
While the framework tries to be relatively generic, and to be
understandable without knowing TDX much in detail, some requirements of
TDX sometimes leak; for example the private page tables also cannot be
zapped while the range has anything mapped, so the mirrored/private page
tables need to be protected from KVM operations that zap any non-leaf
PTEs, for example kvm_mmu_reset_context() or kvm_mmu_zap_all_fast().
For normal VMs, guest memory is zapped for several reasons: user
memory getting paged out by the guest, memslots getting deleted,
passthrough of devices with non-coherent DMA. Confidential computing
adds to these the conversion of memory between shared and privates. These
operations must not zap any private memory that is in use by the guest.
This is possible because the only zapping that is out of the control
of KVM/userspace is paging out userspace memory, which cannot apply to
guestmemfd operations. Thus a TDX VM will only zap private memory from
memslot deletion and from conversion between private and shared memory
which is triggered by the guest.
To avoid zapping too much memory, enums are introduced so that operations
can choose to target onl |
