| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The kunit_run_irq_test() helper allows a function to be run in hardirq
and softirq contexts (in addition to the task context). It does this by
running the user-provided function concurrently in the three contexts,
until either a timeout has expired or a number of iterations have
completed in the normal task context.
However, on setups where the initialisation of the hardirq and softirq
contexts (or, indeed, the scheduling of those tasks) is significantly
slower than the function execution, it's possible for that number of
iterations to be exceeded before any runs in irq contexts actually
occur. This occurs with the polyval.test_polyval_preparekey_in_irqs
test, which runs 20000 iterations of the relatively fast preparekey
function, and therefore fails often under many UML, 32-bit arm, m68k and
other environments.
Instead, ensure that the max_iterations limit counts executions in all
three contexts, and requires at least one of each. This will cause the
test to continue iterating until at least the irq contexts have been
tested, or the 1s wall-clock limit has been exceeded. This causes the
test to pass in all of my environments.
In so doing, we also update the task counters to atomic ints, to better
match both the 'int' max_iterations input, and to ensure they are
correctly updated across contexts.
Finally, we also fix a few potential assertion messages to be
less-specific to the original crypto usecases.
Fixes: 950a81224e8b ("lib/crypto: tests: Add hash-test-template.h and gen-hash-testvecs.py")
Signed-off-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20251219085259.1163048-1-davidgow@google.com
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- New parameterized test features
KUnit parameterized tests supported two primary methods for getting
parameters:
- Defining custom logic within a generate_params() function.
- Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC() macros
with a pre-defined static array and passing the created
*_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating
parameters sequentially via generate_params() is inefficient or
overly complex.
These limitations are fixed with a parameterized test method
- Fix issues in kunit build artifacts cleanup
- Fix parsing skipped test problem in kselftest framework
- Enable PCI on UML without triggering WARN()
- a few other fixes and adds support for new configs such as MIPS
* tag 'linux_kselftest-kunit-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Extend kconfig help text for KUNIT_UML_PCI
rust: kunit: allow `cfg` on `test`s
kunit: qemu_configs: Add MIPS configurations
kunit: Enable PCI on UML without triggering WARN()
Documentation: kunit: Document new parameterized test features
kunit: Add example parameterized test with direct dynamic parameter array setup
kunit: Add example parameterized test with shared resource management using the Resource API
kunit: Enable direct registration of parameter arrays to a KUnit test
kunit: Pass parameterized test context to generate_params()
kunit: Introduce param_init/exit for parameterized test context management
kunit: Add parent kunit for parameterized test context
kunit: tool: Accept --raw_output=full as an alias of 'all'
kunit: tool: Parse skipped tests from kselftest.h
kunit: Always descend into kunit directory during build
|
|
KUnit parameterized tests currently support two primary methods f
or getting parameters:
1. Defining custom logic within a generate_params() function.
2. Using the KUNIT_ARRAY_PARAM() and KUNIT_ARRAY_PARAM_DESC()
macros with a pre-defined static array and passing
the created *_gen_params() to KUNIT_CASE_PARAM().
These methods present limitations when dealing with dynamically
generated parameter arrays, or in scenarios where populating parameters
sequentially via generate_params() is inefficient or overly complex.
This patch addresses these limitations by adding a new `params_array`
field to `struct kunit`, of the type `kunit_params`. The
`struct kunit_params` is designed to store the parameter array itself,
along with essential metadata including the parameter count, parameter
size, and a get_description() function for providing custom descriptions
for individual parameters.
The `params_array` field can be populated by calling the new
kunit_register_params_array() macro from within a param_init() function.
This will register the array as part of the parameterized test context.
The user will then need to pass kunit_array_gen_params() to the
KUNIT_CASE_PARAM_WITH_INIT() macro as the generator function, if not
providing their own. kunit_array_gen_params() is a KUnit helper that will
use the registered array to generate parameters.
The arrays passed to KUNIT_ARRAY_PARAM(,DESC) will also be registered to
the parameterized test context for consistency as well as for higher
availability of the parameter count that will be used for outputting a KTAP
test plan for a parameterized test.
This modification provides greater flexibility to the KUnit framework,
allowing testers to easily register and utilize both dynamic and static
parameter arrays.
Link: https://lore.kernel.org/r/20250826091341.1427123-5-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Only output the test plan if using kunit_array_gen_params --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
To enable more complex parameterized testing scenarios, the
generate_params() function needs additional context beyond just
the previously generated parameter. This patch modifies the
generate_params() function signature to include an extra
`struct kunit *test` argument, giving test users access to the
parameterized test context when generating parameters.
The `struct kunit *test` argument was added as the first parameter
to the function signature as it aligns with the convention of other
KUnit functions that accept `struct kunit *test` first. This also
mirrors the "this" or "self" reference found in object-oriented
programming languages.
This patch also modifies xe_pci_live_device_gen_param() in xe_pci.c
and nthreads_gen_params() in kcsan_test.c to reflect this signature
change.
Link: https://lore.kernel.org/r/20250826091341.1427123-4-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
[Catch some additional gen_params signatures in drm/xe/tests --David]
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Add (*param_init) and (*param_exit) function pointers to
`struct kunit_case`. Users will be able to set them via the new
KUNIT_CASE_PARAM_WITH_INIT() macro.
param_init/exit will be invoked by kunit_run_tests() once before and once
after the parameterized test, respectively. They will receive the
`struct kunit` that holds the parameterized test context; facilitating
init and exit for shared state.
This patch also sets param_init/exit to None in rust/kernel/kunit.rs.
Link: https://lore.kernel.org/r/20250826091341.1427123-3-davidgow@google.com
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Currently, KUnit parameterized tests lack a mechanism to share
resources across parameter runs because the same `struct kunit`
instance is cleaned up and reused for each run.
This patch introduces parameterized test context, enabling test
users to share resources between parameter runs. It also allows
setting up resources that need to be available for all parameter
runs only once, which is helpful in cases where setup is expensive.
To establish a parameterized test context, this patch adds a
parent pointer field to `struct kunit`. This allows resources added
to the parent `struct kunit` to be shared and accessible across all
parameter runs.
In kunit_run_tests(), the default `struct kunit` created is now
designated to act as the parameterized test context whenever a test
is parameterized.
Subsequently, a new `struct kunit` is made for each parameter run, and
its parent pointer is set to the `struct kunit` that holds the
parameterized test context.
Link: https://lore.kernel.org/r/20250826091341.1427123-2-davidgow@google.com
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Marie Zhussupova <marievic@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Rename run_irq_test() to kunit_run_irq_test() and move it to a public
header so that it can be reused by crc_kunit.
Link: https://lore.kernel.org/r/20250811182631.376302-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"Correct MODULE_IMPORT_NS() syntax documentation, make kunit_test
timeout configurable via a module parameter and a Kconfig option, fix
longest symbol length test, add a test for static stub, and adjust
kunit_test timeout based on test_{suite,case} speed"
* tag 'linux_kselftest-kunit-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: fix longest symbol length test
kunit: Make default kunit_test timeout configurable via both a module parameter and a Kconfig option
kunit: Adjust kunit_test timeout based on test_{suite,case} speed
kunit: Add test for static stub
Documentation: kunit: Correct MODULE_IMPORT_NS() syntax
|
|
Tests can allocate from virtual memory using kunit_vm_mmap(), which
transparently creates and attaches an mm_struct to the test runner if
one is not already attached. This is suitable for most cases, except for
when the code under test must access a task's mm before performing an
mmap. Expose kunit_attach_mm() as part of the interface for those
cases. This does not change the existing behavior.
Cc: David Gow <davidgow@google.com>
Signed-off-by: Tiffany Yang <ynaffit@google.com>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20250714185321.2417234-4-ynaffit@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently, the in-kernel kunit test case timeout is 300 seconds. (There
is a separate timeout mechanism for the whole test execution in
kunit.py, but that's unrelated.) However, tests marked 'slow' or 'very
slow' may timeout, particularly on slower machines.
Implement a multiplier to the test-case timeout, so that slower tests
have longer to complete:
- DEFAULT -> 1x default timeout
- KUNIT_SPEED_SLOW -> 3x default timeout
- KUNIT_SPEED_VERY_SLOW -> 12x default timeout
A further change is planned to allow user configuration of the
default/base timeout to allow people with faster or slower machines to
adjust these to their use-cases.
Link: https://lore.kernel.org/r/20250614084711.2654593-2-davidgow@google.com
Signed-off-by: Ujwal Jain <ujwaljain@google.com>
Co-developed-by: David Gow <davidgow@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This has been a semi-quiet cycle. The core framework remains unchanged
this time around.
In terms of shiny new code though, we have support for the SpacemiT K1
SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the usual
silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is
likely because they put one SoC support inside a driver for a
different SoC that is very similar.
Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along
with some Kconfig changes to make compile testing simpler and even
more DT binding conversions to boot.
The exciting part is still the new SoC support like SpacemiT and
Sophgo support though, which really dominate the diffstat because they
introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile
testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to
YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks
clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750
clk: qcom: rpmh: make clkaN optional
clk: qcom: Add support for Camera Clock Controller on QCS8300
clk: rockchip: rk3528: add slab.h header include
clk: rockchip: rk3576: add missing slab.h include
clk: meson: Do not enable by default during compile testing
clk: meson-g12a: add missing fclk_div2 to spicc
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
clk: rockchip: rename gate-grf clk file
clk: rockchip: rename branch_muxgrf to branch_grf_mux
clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support
dt-bindings: allwinner: add H616 DE33 clock binding
clk: samsung: correct clock summary for hsi1 block
dt-bindings: clock: add SM6350 QCOM video clock bindings
clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks
clk: sunxi-ng: h616: Add LVDS reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset
clk: rockchip: rk3036: mark ddrphy as critical
clk: rockchip: rk3036: fix implementation of usb480m clock mux
...
|
|
Add a forward-declare of struct of_phandle_args to prevent the compiler
warning:
../include/kunit/clk.h:29:63: warning: ‘struct of_phandle_args’ declared
inside parameter list will not be visible outside of this definition or
declaration
struct clk_hw *(*get)(struct of_phandle_args *clkspec, void *data),
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250327125214.82598-1-rf@opensource.cirrus.com
Fixes: a82fcb16d977 ("clk: test: Add test managed of_clk_add_hw_provider()")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Fix a misspelling of "slow".
Link: https://lore.kernel.org/r/1f7ebf98598418914ec9f5b6d5cb8583d24a4bf0.1743089563.git.geert@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
|
|
kunit_skip() and kunit_mark_skipped() can only be passed a pointer
to a struct kunit, not struct kunit_suite (only kunit_log() actually
supports both). Rename their first argument accordingly.
Link: https://lore.kernel.org/r/20250217140008.1941287-1-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- fix struct completion warning
- introduce autorun option
- add fallback for os.sched_getaffinity
- enable hardware acceleration when available
* tag 'linux_kselftest-kunit-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Introduce autorun option
kunit: enable hardware acceleration when available
kunit: add fallback for os.sched_getaffinity
kunit: platform: Resolve 'struct completion' warning
|
|
The new option controls tests run on boot or module load. With the new
debugfs "run" dentry allowing to run tests on demand, an ability to disable
automatic tests run becomes a useful option in case of intrusive tests.
The option is set to true by default to preserve the existent behavior. It
can be overridden by either the corresponding module option or by the
corresponding config build option.
Link: https://lore.kernel.org/r/173015245931.4747.16419517391658830640.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
If the <kunit/platform_device.h> header is included in a test without
certain other headers, it produces compiler warnings like:
In file included from [...]
../include/kunit/platform_device.h:15:57: warning: ‘struct completion’
declared inside parameter list will not be visible outside of this
definition or declaration
15 | struct completion *x);
| ^~~~~~~~~~
Add a 'struct completion' forward declaration to resolve this.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Clean up the existing export namespace code along the same lines of
commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo)
to __section("foo")") and for the same reason, it is not desired for the
namespace argument to be a macro expansion itself.
Scripted using
git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file;
do
awk -i inplace '
/^#define EXPORT_SYMBOL_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/^#define MODULE_IMPORT_NS/ {
gsub(/__stringify\(ns\)/, "ns");
print;
next;
}
/MODULE_IMPORT_NS/ {
$0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g");
}
/EXPORT_SYMBOL_NS/ {
if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) {
if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ &&
$0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ &&
$0 !~ /^my/) {
getline line;
gsub(/[[:space:]]*\\$/, "");
gsub(/[[:space:]]/, "", line);
$0 = $0 " " line;
}
$0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/,
"\\1(\\2, \"\\3\")", "g");
}
}
{ print }' $file;
done
Requested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc
Acked-by: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core framework gained a clk provider helper, a clk consumer
helper, and some unit tests for the assigned clk rates feature in
DeviceTree. On the vendor driver side, we gained a whole pile of SoC
driver support detailed below. The majority in the diffstat is
Qualcomm, but there's also quite a few Samsung and Mediatek clk driver
additions in here as well. The top vendors is quite common, but the
sheer amount of new drivers is uncommon, so I'm anticipating a larger
number of fixes for clk drivers this cycle.
Core:
- devm_clk_bulk_get_all_enabled() to return number of clks acquired
- devm_clk_hw_register_gate_parent_hw() helper to modernize drivers
- KUnit tests for clk-assigned-rates{,-u64}
New Drivers:
- Marvell PXA1908 SoC clks
- Mobileye EyeQ5, EyeQ6L and EyeQ6H clk driver
- TWL6030 clk driver
- Nuvoton Arbel BMC NPCM8XX SoC clks
- MediaTek MT6735 SoC clks
- MediaTek MT7620, MT7628 and MT7688 MMC clks
- Add a driver for gated fixed rate clocks
- Global clock controllers for Qualcomm QCS8300 and IPQ5424 SoCs
- Camera, display and video clock controllers for Qualcomm SA8775P
SoCs
- Global, display, GPU, TCSR, and RPMh clock controllers for Qualcomm
SAR2130P
- Global, camera, display, GPU, and video clock controllers for
Qualcomm SM8475 SoCs
- RTC power domain and Battery Backup Function (VBATTB) clock support
for the Renesas RZ/G3S SoC
- Qualcomm IPQ9574 alpha PLLs
- Support for i.MX91 CCM in the i.MX93 driver
- Microchip LAN969X SoC clks
- Cortex-A55 core clocks and Interrupt Control Unit (ICU) clock and
reset on Renesas RZ/V2H(P)
- Samsung ExynosAutov920 clk drivers for PERIC1, MISC, HSI0 and HSI1
- Samsung Exynos8895 clk drivers for FSYS0/1, PERIC0/1, PERIS and TOP
Updates:
- Convert more clk bindings to YAML
- Various clk driver cleanups: NULL checks, add const, etc.
- Remove END/NUM #defines that count number of clks in various
binding headers
- Continue moving reset drivers to drivers/reset via auxiliary bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (162 commits)
clk: clk-loongson2: Fix potential buffer overflow in flexible-array member access
clk: Fix invalid execution of clk_set_rate
clk: clk-loongson2: Fix memory corruption bug in struct loongson2_clk_provider
clk: lan966x: make it selectable for ARCH_LAN969X
clk: eyeq: add EyeQ6H west fixed factor clocks
clk: eyeq: add EyeQ6H central fixed factor clocks
clk: eyeq: add EyeQ5 fixed factor clocks
clk: eyeq: add fixed factor clocks infrastructure
clk: eyeq: require clock index with phandle in all cases
clk: fixed-factor: add clk_hw_register_fixed_factor_index() function
dt-bindings: clock: eyeq: add more Mobileye EyeQ5/EyeQ6H clocks
dt-bindings: soc: mobileye: set `#clock-cells = <1>` for all compatibles
clk: clk-axi-clkgen: make sure to enable the AXI bus clock
dt-bindings: clock: axi-clkgen: include AXI clk
clk: mmp: Add Marvell PXA1908 MPMU driver
clk: mmp: Add Marvell PXA1908 APMU driver
clk: mmp: Add Marvell PXA1908 APBCP driver
clk: mmp: Add Marvell PXA1908 APBC driver
dt-bindings: clock: Add Marvell PXA1908 clock bindings
clk: mmp: Switch to use struct u32_fract instead of custom one
...
|
|
Kuan-Wei Chiu pointed out that the kernel doc for kunit_zalloc_skb()
needs to include the @gfp information. Add it.
Reported-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Closes: https://lore.kernel.org/all/Zy+VIXDPuU613fFd@visitorckw-System-Product-Name/
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The intent here was clearly to use the gfp variable flags instead of
hardcoding GFP_KERNEL. All the callers pass GFP_KERNEL as the gfp
flags so this doesn't affect runtime.
Fixes: b3231d353a51 ("kunit: add a convenience allocation wrapper for SKBs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Make the lives of __of_overlay_apply_kunit() callers easier by
extracting some of the boiler plate involved in referencing the DT
overlays.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240822002433.1163814-3-sboyd@kernel.org
|
|
Add a test managed version of of_clk_add_hw_provider() that
automatically unregisters the clk_hw provider upon test conclusion.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Cc: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240822002433.1163814-2-sboyd@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core clk framework is left largely untouched this time around
except for support for the newly ratified DT property
'assigned-clock-rates-u64'.
I'm much more excited about the support for loading DT overlays from
KUnit tests so that we can test how the clk framework parses DT nodes
during clk registration. The clk framework has some places that are
highly DeviceTree dependent so this charts the path to extend the
KUnit tests to cover even more framework code in the future. I've got
some more tests on the list that use the DT overlay support, but they
uncovered issues with clk unregistration that I'm still working on
fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm
and Renesas SoCs, making it fairly usual. Looking closer, there are
fixes for things all over the place, like adding missing clk
frequencies or moving defines for the number of clks out of DT binding
headers into the drivers. There are even conversions of DT bindings to
YAML and migration away from strings to describe clk topology. Overall
it doesn't look unusual so I expect the new drivers to be where we'll
have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
them turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
and add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
clocks on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating
more memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the i.MXRT1050
driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
clk: Switch back to struct platform_driver::remove()
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- a new int_pow test suite
- documentation update to clarify filename best practices
- kernel-doc fix for EXPORT_SYMBOL_IF_KUNIT
- change to build compile_commands.json automatically instead of
requiring a manual build
* tag 'linux_kselftest-kunit-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
lib/math: Add int_pow test suite
kunit: tool: Build compile_commands.json
kunit: Fix kernel-doc for EXPORT_SYMBOL_IF_KUNIT
Documentation: KUnit: Update filename best practices
|
|
Add a missing kerneldoc comment for the 'test' test context parameter,
fixing the following warning:
include/kunit/test.h:492: warning: Function parameter or struct member 'test' not described in 'kunit_kfree_const'
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20240827160631.67e121ed@canb.auug.org.au/
Fixes: f2c6dbd22017 ("kunit: Device wrappers should also manage driver name")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
While kunit/visibility.h is today not included in any generated
kernel documentation, also likely due to the fact that none of the
existing comments are correctly recognized as kernel-doc, but once
we decide to add this header and fix the tool, there will be:
../include/kunit/visibility.h:61: warning: Function parameter or
struct member 'symbol' not described in 'EXPORT_SYMBOL_IF_KUNIT'
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
kunit_driver_create() accepts a name for the driver, but does not copy
it, so if that name is either on the stack, or otherwise freed, we end
up with a use-after-free when the driver is cleaned up.
Instead, strdup() the name, and manage it as another KUnit allocation.
As there was no existing kunit_kstrdup(), we add one. Further, add a
kunit_ variant of strdup_const() and kfree_const(), so we don't need to
allocate and manage the string in the majority of cases where it's a
constant.
However, these are inline functions, and is_kernel_rodata() only works
for built-in code. This causes problems in two cases:
- If kunit is built as a module, __{start,end}_rodata is not defined.
- If a kunit test using these functions is built as a module, it will
suffer the same fate.
This fixes a KASAN splat with overflow.overflow_allocation_test, when
built as a module.
Restrict the is_kernel_rodata() case to when KUnit is built as a module,
which fixes the first case, at the cost of losing the optimisation.
Also, make kunit_{kstrdup,kfree}_const non-inline, so that other modules
using them will not accidentally depend on is_kernel_rodata(). If KUnit
is built-in, they'll benefit from the optimisation, if KUnit is not,
they won't, but the string will be properly duplicated.
Fixes: d03c720e03bd ("kunit: Add APIs for managing devices")
Reported-by: Nico Pache <npache@redhat.com>
Closes: https://groups.google.com/g/kunit-dev/c/81V9b9QYON0
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Unit tests are more ergonomic and simpler to understand if they don't
have to hoist a bunch of code into the test harness init and exit
functions. Add some test managed wrappers for the clk APIs so that clk
unit tests can write more code in the actual test and less code in the
harness.
Only add APIs that are used for now. More wrappers can be added in the
future as necessary.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-7-sboyd@kernel.org
|
|
Introduce KUnit resource wrappers around platform_driver_register(),
platform_device_alloc(), and platform_device_add() so that test authors
can register platform drivers/devices from their tests and have the
drivers/devices automatically be unregistered when the test is done.
This makes test setup code simpler when a platform driver or platform
device is needed. Add a few test cases at the same time to make sure the
APIs work as intended.
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Reviewed-by: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-6-sboyd@kernel.org
|
|
Add test managed wrappers for of_overlay_apply() that automatically
removes the overlay when the test is finished. This API is intended for
use by KUnit tests that test code which relies on 'struct device_node's
and of_*() APIs.
KUnit tests will call of_overlay_apply_kunit() to load an overlay that's
been built into the kernel image. When the test is complete, the overlay
will be removed.
This has a few benefits:
1) It keeps the tests hermetic because the overlay is removed when the
test is complete. Tests won't even be aware that an overlay was
loaded in another test.
2) The overlay code can live right next to the unit test that loads it.
The overlay and the unit test can be compiled into one kernel module
if desired.
3) We can test different device tree configurations by loading
different overlays. The overlays can be written for a specific test,
and there can be many of them loaded per-test without needing to jam
all possible combinations into one DTB.
4) It also allows KUnit to test device tree dependent code on any
architecture, not just UML. This allows KUnit tests to test
architecture specific device tree code.
There are some potential pitfalls though. Test authors need to be
careful to not overwrite properties in the live tree. The easiest way to
do this is to add and remove nodes with a 'kunit-' prefix, almost
guaranteeing that the same node won't be present in the tree loaded at
boot.
Suggested-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20240718210513.3801024-3-sboyd@kernel.org
|
|
Introduces KUNIT_ASSERT_MEMEQ and KUNIT_ASSERT_MEMNEQ macros
to provide assert-type equivalents for memory comparison.
While KUNIT_EXPECT_MEMEQ and KUNIT_EXPECT_MEMNEQ are available for
expectations, the addition of these new macros ensures that assertions
can also be used for memory comparisons, enhancing the consistency and
completeness of the kunit framework.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Both KUNIT_FAIL and KUNIT_ASSERT_FAILURE defined to KUNIT_FAIL_ASSERTION
with different tpye of kunit_assert_type. The current naming of
KUNIT_ASSERT_FAILURE and KUNIT_FAIL_ASSERTION is confusing due to their
similarities. To improve readability and symmetry, renames
KUNIT_ASSERT_FAILURE to KUNIT_FAIL_AND_ABORT. Makes the naming
consistent, with KUNIT_FAIL and KUNIT_FAIL_AND_ABORT being symmetrical.
Additionally, an explanation for KUNIT_FAIL_AND_ABORT has been added to
clarify its usage.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
The current comment for KUNIT_ASSERT_STRNEQ incorrectly describes it as
an expectation. Since KUNIT_ASSERT_STRNEQ is an assertion, updates the
comment to correctly refer to it as such.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
For tests that need to allocate using vm_mmap() (e.g. usercopy and
execve), provide the interface to have the allocation tracked by KUnit
itself. This requires bringing up a placeholder userspace mm.
This combines my earlier attempt at this with Mark Rutland's version[1].
Normally alloc_mm() and arch_pick_mmap_layout() aren't exported for
modules, so export these only for KUnit testing.
Link: https://lore.kernel.org/lkml/20230321122514.1743889-2-mark.rutland@arm.com/ [1]
Co-developed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
There are multiple assertion formatting functions in the `assert.c`
file, which are not covered with tests yet. Implement the KUnit test
for these functions.
The test consists of 11 test cases for the following functions:
1) 'is_literal'
2) 'is_str_literal'
3) 'kunit_assert_prologue', test case for multiple assert types
4) 'kunit_assert_print_msg'
5) 'kunit_unary_assert_format'
6) 'kunit_ptr_not_err_assert_format'
7) 'kunit_binary_assert_format'
8) 'kunit_binary_ptr_assert_format'
9) 'kunit_binary_str_assert_format'
10) 'kunit_assert_hexdump'
11) 'kunit_mem_assert_format'
The test aims at maximizing the branch coverage for the assertion
formatting functions.
As you can see, it covers some of the static helper functions as
well, so mark the static functions in `assert.c` as 'VISIBLE_IF_KUNIT'
and conditionally export them with EXPORT_SYMBOL_IF_KUNIT. Add the
corresponding definitions to `assert.h`.
Build the assert test when CONFIG_KUNIT_TEST is enabled, similar to
how it is done for the string stream test.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Acked-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
This helps identify the location of test faults with opportunistic calls
to _KUNIT_SAVE_LOC(). This can be useful while writing tests or
debugging them. It is possible to call KUNIT_SUCCESS() to explicit save
last location.
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20240408074625.65017-7-mic@digikod.net
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Previously, when a kernel test thread crashed (e.g. NULL pointer
dereference, general protection fault), the KUnit test hanged for 30
seconds and exited with a timeout error.
Fix this issue by waiting on task_struct->vfork_done instead of the
custom kunit_try_catch.try_completion, and track the execution state by
initially setting try_result with -EINTR and only setting it to 0 if
the test passed.
Fix kunit_generic_run_threadfn_adapter() signature by returning 0
instead of calling kthread_complete_and_exit(). Because thread's exit
code is never checked, always set it to 0 to make it clear. To make
this explicit, export kthread_exit() for KUnit tests built as module.
Fix the -EINTR error message, which couldn't be reached until now.
This is tested with a following patch.
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Tested-by: Rae Moar <rmoar@google.com>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20240408074625.65017-5-mic@digikod.net
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org&g |
