| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fd prepare updates from Christian Brauner:
"This adds the FD_ADD() and FD_PREPARE() primitive. They simplify the
common pattern of get_unused_fd_flags() + create file + fd_install()
that is used extensively throughout the kernel and currently requires
cumbersome cleanup paths.
FD_ADD() - For simple cases where a file is installed immediately:
fd = FD_ADD(O_CLOEXEC, vfio_device_open_file(device));
if (fd < 0)
vfio_device_put_registration(device);
return fd;
FD_PREPARE() - For cases requiring access to the fd or file, or
additional work before publishing:
FD_PREPARE(fdf, O_CLOEXEC, sync_file->file);
if (fdf.err) {
fput(sync_file->file);
return fdf.err;
}
data.fence = fd_prepare_fd(fdf);
if (copy_to_user((void __user *)arg, &data, sizeof(data)))
return -EFAULT;
return fd_publish(fdf);
The primitives are centered around struct fd_prepare. FD_PREPARE()
encapsulates all allocation and cleanup logic and must be followed by
a call to fd_publish() which associates the fd with the file and
installs it into the caller's fdtable. If fd_publish() isn't called,
both are deallocated automatically. FD_ADD() is a shorthand that does
fd_publish() immediately and never exposes the struct to the caller.
I've implemented this in a way that it's compatible with the cleanup
infrastructure while also being usable separately. IOW, it's centered
around struct fd_prepare which is aliased to class_fd_prepare_t and so
we can make use of all the basica guard infrastructure"
* tag 'vfs-6.19-rc1.fd_prepare.fs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits)
io_uring: convert io_create_mock_file() to FD_PREPARE()
file: convert replace_fd() to FD_PREPARE()
vfio: convert vfio_group_ioctl_get_device_fd() to FD_ADD()
tty: convert ptm_open_peer() to FD_ADD()
ntsync: convert ntsync_obj_get_fd() to FD_PREPARE()
media: convert media_request_alloc() to FD_PREPARE()
hv: convert mshv_ioctl_create_partition() to FD_ADD()
gpio: convert linehandle_create() to FD_PREPARE()
pseries: port papr_rtas_setup_file_interface() to FD_ADD()
pseries: convert papr_platform_dump_create_handle() to FD_ADD()
spufs: convert spufs_gang_open() to FD_PREPARE()
papr-hvpipe: convert papr_hvpipe_dev_create_handle() to FD_PREPARE()
spufs: convert spufs_context_open() to FD_PREPARE()
net/socket: convert __sys_accept4_file() to FD_ADD()
net/socket: convert sock_map_fd() to FD_ADD()
net/kcm: convert kcm_ioctl() to FD_PREPARE()
net/handshake: convert handshake_nl_accept_doit() to FD_PREPARE()
secretmem: convert memfd_secret() to FD_ADD()
memfd: convert memfd_create() to FD_ADD()
bpf: convert bpf_token_create() to FD_PREPARE()
...
|
|
Link: https://patch.msgid.link/20251123-work-fd-prepare-v4-44-b6efa1706cfd@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
On stock kernel gcc 14 emits avoidable register spillage:
endbr64
call ffffffff81374630 <__fentry__>
push %r13
push %r12
push %rbx
sub $0x8,%rsp
[snip]
Total fast path is 99 bytes.
Moving the slowpath out avoids it and shortens the fast path to 74
bytes.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://patch.msgid.link/20251110095634.1433061-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
replace_fd() returns the number of the new file descriptor through the
return value of do_dup2(). However its callers never care about the
specific returned number. In fact the caller in receive_fd_replace() treats
any non-zero return value as an error and therefore never calls
__receive_sock() for most file descriptors, which is a bug.
To fix the bug in receive_fd_replace() and to avoid the same issue
happening in future callers, signal success through a plain zero.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/lkml/20250801220215.GS222315@ZenIV/
Fixes: 173817151b15 ("fs: Expand __receive_fd() to accept existing fd")
Fixes: 42eb0d54c08a ("fs: split receive_fd_replace from __receive_fd")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/20250805-fix-receive_fd_replace-v3-1-b72ba8b34bac@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc VFS updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add ext4 IOCB_DONTCACHE support
This refactors the address_space_operations write_begin() and
write_end() callbacks to take const struct kiocb * as their first
argument, allowing IOCB flags such as IOCB_DONTCACHE to propagate
to the filesystem's buffered I/O path.
Ext4 is updated to implement handling of the IOCB_DONTCACHE flag
and advertises support via the FOP_DONTCACHE file operation flag.
Additionally, the i915 driver's shmem write paths are updated to
bypass the legacy write_begin/write_end interface in favor of
directly calling write_iter() with a constructed synchronous kiocb.
Another i915 change replaces a manual write loop with
kernel_write() during GEM shmem object creation.
Cleanups:
- don't duplicate vfs_open() in kernel_file_open()
- proc_fd_getattr(): don't bother with S_ISDIR() check
- fs/ecryptfs: replace snprintf with sysfs_emit in show function
- vfs: Remove unnecessary list_for_each_entry_safe() from
evict_inodes()
- filelock: add new locks_wake_up_waiter() helper
- fs: Remove three arguments from block_write_end()
- VFS: change old_dir and new_dir in struct renamedata to dentrys
- netfs: Remove unused declaration netfs_queue_write_request()
Fixes:
- eventpoll: Fix semi-unbounded recursion
- eventpoll: fix sphinx documentation build warning
- fs/read_write: Fix spelling typo
- fs: annotate data race between poll_schedule_timeout() and
pollwake()
- fs/pipe: set FMODE_NOWAIT in create_pipe_files()
- docs/vfs: update references to i_mutex to i_rwsem
- fs/buffer: remove comment about hard sectorsize
- fs/buffer: remove the min and max limit checks in __getblk_slow()
- fs/libfs: don't assume blocksize <= PAGE_SIZE in
generic_check_addressable
- fs_context: fix parameter name in infofc() macro
- fs: Prevent file descriptor table allocations exceeding INT_MAX"
* tag 'vfs-6.17-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
netfs: Remove unused declaration netfs_queue_write_request()
eventpoll: fix sphinx documentation build warning
ext4: support uncached buffered I/O
mm/pagemap: add write_begin_get_folio() helper function
fs: change write_begin/write_end interface to take struct kiocb *
drm/i915: Refactor shmem_pwrite() to use kiocb and write_iter
drm/i915: Use kernel_write() in shmem object create
eventpoll: Fix semi-unbounded recursion
vfs: Remove unnecessary list_for_each_entry_safe() from evict_inodes()
fs/libfs: don't assume blocksize <= PAGE_SIZE in generic_check_addressable
fs/buffer: remove the min and max limit checks in __getblk_slow()
fs: Prevent file descriptor table allocations exceeding INT_MAX
fs: Remove three arguments from block_write_end()
fs/ecryptfs: replace snprintf with sysfs_emit in show function
fs: annotate suspected data race between poll_schedule_timeout() and pollwake()
docs/vfs: update references to i_mutex to i_rwsem
fs/buffer: remove comment about hard sectorsize
fs_context: fix parameter name in infofc() macro
VFS: change old_dir and new_dir in struct renamedata to dentrys
proc_fd_getattr(): don't bother with S_ISDIR() check
...
|
|
When sysctl_nr_open is set to a very high value (for example, 1073741816
as set by systemd), processes attempting to use file descriptors near
the limit can trigger massive memory allocation attempts that exceed
INT_MAX, resulting in a WARNING in mm/slub.c:
WARNING: CPU: 0 PID: 44 at mm/slub.c:5027 __kvmalloc_node_noprof+0x21a/0x288
This happens because kvmalloc_array() and kvmalloc() check if the
requested size exceeds INT_MAX and emit a warning when the allocation is
not flagged with __GFP_NOWARN.
Specifically, when nr_open is set to 1073741816 (0x3ffffff8) and a
process calls dup2(oldfd, 1073741880), the kernel attempts to allocate:
- File descriptor array: 1073741880 * 8 bytes = 8,589,935,040 bytes
- Multiple bitmaps: ~400MB
- Total allocation size: > 8GB (exceeding INT_MAX = 2,147,483,647)
Reproducer:
1. Set /proc/sys/fs/nr_open to 1073741816:
# echo 1073741816 > /proc/sys/fs/nr_open
2. Run a program that uses a high file descriptor:
#include <unistd.h>
#include <sys/resource.h>
int main() {
struct rlimit rlim = {1073741824, 1073741824};
setrlimit(RLIMIT_NOFILE, &rlim);
dup2(2, 1073741880); // Triggers the warning
return 0;
}
3. Observe WARNING in dmesg at mm/slub.c:5027
systemd commit a8b627a introduced automatic bumping of fs.nr_open to the
maximum possible value. The rationale was that systems with memory
control groups (memcg) no longer need separate file descriptor limits
since memory is properly accounted. However, this change overlooked
that:
1. The kernel's allocation functions still enforce INT_MAX as a maximum
size regardless of memcg accounting
2. Programs and tests that legitimately test file descriptor limits can
inadvertently trigger massive allocations
3. The resulting allocations (>8GB) are impractical and will always fail
systemd's algorithm starts with INT_MAX and keeps halving the value
until the kernel accepts it. On most systems, this results in nr_open
being set to 1073741816 (0x3ffffff8), which is just under 1GB of file
descriptors.
While processes rarely use file descriptors near this limit in normal
operation, certain selftests (like
tools/testing/selftests/core/unshare_test.c) and programs that test file
descriptor limits can trigger this issue.
Fix this by adding a check in alloc_fdtable() to ensure the requested
allocation size does not exceed INT_MAX. This causes the operation to
fail with -EMFILE instead of triggering a kernel warning and avoids the
impractical >8GB memory allocation request.
Fixes: 9cfe015aa424 ("get rid of NR_OPEN and introduce a sysctl_nr_open")
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/20250629074021.1038845-1-sashal@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The assert in function file_seek_cur_needs_f_lock() can be triggered very
easily because there are many users of vfs_llseek() (such as overlayfs)
that do their custom locking around llseek instead of relying on
fdget_pos(). Just drop the overzealous assertion.
Fixes: da06e3c51794 ("fs: don't needlessly acquire f_lock")
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Luis Henriques <luis@igalia.com>
Link: https://lore.kernel.org/20250613101111.17716-1-luis@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This reduces the slowdown in face of multiple callers issuing close on
what turns out to not be the last reference.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/20250418125756.59677-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202504171513.6d6f8a16-lkp@intel.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file handling updates from Christian Brauner:
"This contains performance improvements for struct file's new refcount
mechanism and various other performance work:
- The stock kernel transitioning the file to no refs held penalizes
the caller with an extra atomic to block any increments. For cases
where the file is highly likely to be going away this is easily
avoidable.
Add file_ref_put_close() to better handle the common case where
closing a file descriptor also operates on the last reference and
build fput_close_sync() and fput_close() on top of it. This brings
about 1% performance improvement by eliding one atomic in the
common case.
- Predict no error in close() since the vast majority of the time
system call returns 0.
- Reduce the work done in fdget_pos() by predicting that the file was
found and by explicitly comparing the reference count to one and
ignoring the dead zone"
* tag 'vfs-6.15-rc1.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: reduce work in fdget_pos()
fs: use fput_close() in path_openat()
fs: use fput_close() in filp_close()
fs: use fput_close_sync() in close()
file: add fput and file_ref_put routines optimized for use when closing a fd
fs: predict no error in close()
|
|
fd_install() has a questionable comment above it.
While it correctly points out a possible race against dup2(), it states:
> We need to detect this and fput() the struct file we are about to
> overwrite in this case.
>
> It should never happen - if we allow dup2() do it, _really_ bad things
> will follow.
I have difficulty parsing the above. The first sentence would suggest
fd_install() tries to detect and recover from the race (it does not),
the next one claims the race needs to be dealt with (it is, by dup2()).
Given that fd_install() does not suffer the burden, this patch removes
the above and instead expands on the race in dup2() commentary.
While here tidy up the docs around fd_install().
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250320102637.1924183-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
1. predict the file was found
2. explicitly compare the ref to "one", ignoring the dead zone
The latter arguably improves the behavior to begin with. Suppose the
count turned bad -- the previously used ref routine is going to check
for it and return 0, indicating the count does not necessitate taking
->f_pos_lock. But there very well may be several users.
i.e. not paying for special-casing the dead zone improves semantics.
While here spell out each condition in a dedicated if statement. This
has no effect on generated code.
Sizes are as follows (in bytes; gcc 13, x86-64):
stock: 321
likely(): 298
likely()+ref: 280
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250319215801.1870660-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
... except when the table is known to be only used by one thread.
A file pointer can get installed at any moment despite the ->file_lock
being held since the following:
8a81252b774b53e6 ("fs/file.c: don't acquire files->file_lock in fd_install()")
Accesses subject to such a race can in principle suffer load tearing.
While here redo the comment in dup_fd -- it only covered a race against
files showing up, still assuming fd_install() takes the lock.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250313135725.1320914-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This also restores the check which got removed in 52732bb9abc9ee5b
("fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd()")
for performance reasons -- they no longer apply with a debug-only
variant.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250312161941.1261615-1-mjguzik@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Vast majority of the time closing a file descriptor also operates on the
last reference, where a regular fput usage will result in 2 atomics.
This can be changed to only suffer 1.
See commentary above file_ref_put_close() for more information.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250305123644.554845-2-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Before 2011 there was no meaningful synchronization between
read/readdir/write/seek. Only in commit
ef3d0fd27e90 ("vfs: do (nearly) lockless generic_file_llseek")
synchronization was added for SEEK_CUR by taking f_lock around
vfs_setpos().
Then in 2014 full synchronization between read/readdir/write/seek was
added in commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX")
by introducing f_pos_lock for regular files with FMODE_ATOMIC_POS and
for directories. At that point taking f_lock became unnecessary for such
files.
So only acquire f_lock for SEEK_CUR if this isn't a file that would have
acquired f_pos_lock if necessary.
Link: https://lore.kernel.org/r/20250207-daten-mahlzeit-99d2079864fb@brauner
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Support caching symlink lengths in inodes
The size is stored in a new union utilizing the same space as
i_devices, thus avoiding growing the struct or taking up any more
space
When utilized it dodges strlen() in vfs_readlink(), giving about
1.5% speed up when issuing readlink on /initrd.img on ext4
- Add RWF_DONTCACHE iocb and FOP_DONTCACHE file_operations flag
If a file system supports uncached buffered IO, it may set
FOP_DONTCACHE and enable support for RWF_DONTCACHE.
If RWF_DONTCACHE is attempted without the file system supporting
it, it'll get errored with -EOPNOTSUPP
- Enable VBOXGUEST and VBOXSF_FS on ARM64
Now that VirtualBox is able to run as a host on arm64 (e.g. the
Apple M3 processors) we can enable VBOXSF_FS (and in turn
VBOXGUEST) for this architecture.
Tested with various runs of bonnie++ and dbench on an Apple MacBook
Pro with the latest Virtualbox 7.1.4 r165100 installed
Cleanups:
- Delay sysctl_nr_open check in expand_files()
- Use kernel-doc includes in fiemap docbook
- Use page->private instead of page->index in watch_queue
- Use a consume fence in mnt_idmap() as it's heavily used in
link_path_walk()
- Replace magic number 7 with ARRAY_SIZE() in fc_log
- Sort out a stale comment about races between fd alloc and dup2()
- Fix return type of do_mount() from long to int
- Various cosmetic cleanups for the lockref code
Fixes:
- Annotate spinning as unlikely() in __read_seqcount_begin
The annotation already used to be there, but got lost in commit
52ac39e5db51 ("seqlock: seqcount_t: Implement all read APIs as
statement expressions")
- Fix proc_handler for sysctl_nr_open
- Flush delayed work in delayed fput()
- Fix grammar and spelling in propagate_umount()
- Fix ESP not readable during coredump
In /proc/PID/stat, there is the kstkesp field which is the stack
pointer of a thread. While the thread is active, this field reads
zero. But during a coredump, it should have a valid value
However, at the moment, kstkesp is zero even during coredump
- Don't wake up the writer if the pipe is still full
- Fix unbalanced user_access_end() in select code"
* tag 'vfs-6.14-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (28 commits)
gfs2: use lockref_init for qd_lockref
erofs: use lockref_init for pcl->lockref
dcache: use lockref_init for d_lockref
lockref: add a lockref_init helper
lockref: drop superfluous externs
lockref: use bool for false/true returns
lockref: improve the lockref_get_not_zero description
lockref: remove lockref_put_not_zero
fs: Fix return type of do_mount() from long to int
select: Fix unbalanced user_access_end()
vbox: Enable VBOXGUEST and VBOXSF_FS on ARM64
pipe_read: don't wake up the writer if the pipe is still full
selftests: coredump: Add stackdump test
fs/proc: do_task_stat: Fix ESP not readable during coredump
fs: add RWF_DONTCACHE iocb and FOP_DONTCACHE file_operations flag
fs: sort out a stale comment about races between fd alloc and dup2
fs: Fix grammar and spelling in propagate_umount()
fs: fc_log replace magic number 7 with ARRAY_SIZE()
fs: use a consume fence in mnt_idmap()
file: flush delayed work in delayed fput()
...
|
|
It claims the issue is only relevant for shared descriptor tables which
is of no concern for POSIX (but then is POSIX of concern to anyone
today?), which I presume predates standarized threading.
The comment also mentions the following systems:
- OpenBSD installing a larval file -- they moved away from it, file is
installed late and EBUSY is returned on conflict
- FreeBSD returning EBADF -- reworked to install the file early like
OpenBSD used to do
- NetBSD "deadlocks in amusing ways" -- their solution looks
Solaris-inspired (not a compliment) and I would not be particularly
surprised if it indeed deadlocked, in amusing ways or otherwise
I don't believe mentioning any of these adds anything and the statement
about the issue not being POSIX-relevant is outdated.
dup2 description in POSIX still does not mention the problem.
Just shorten the comment and be done with it.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241205154743.1586584-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
fs/file.c should include include/linux/init_task.h for
declaration of init_files. This fixes the sparse warning:
fs/file.c:501:21: warning: symbol 'init_files' was not declared. Should it be static?
Signed-off-by: Zhang Kunbo <zhangkunbo@huawei.com>
Link: https://lore.kernel.org/r/20241217071836.2634868-1-zhangkunbo@huawei.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Suppose a thread sharing the table started a resize, while
sysctl_nr_open got lowered to a value which prohibits it. This is still
going to go through with and without the patch, which is fine.
Further suppose another thread shows up to do a matching expansion while
resize_in_progress == true. It is going to error out since it performs
the sysctl_nr_open check *before* finding out if there is an expansion
in progress. But the aformentioned thread is going to succeded, so the
error is spurious (and it would not happen if the thread showed up a
little bit later).
Checking the sysctl *after* we know there are no pending updates sorts
it out.
While here annotate the thing as unlikely.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20241116064128.280870-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This contains changes the changes for files for this cycle:
- Introduce a new reference counting mechanism for files.
As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop
it has O(N^2) behaviour under contention with N concurrent
operations and it is in a hot path in __fget_files_rcu().
The rcuref infrastructures remedies this problem by using an
unconditional increment relying on safe- and dead zones to make
this work and requiring rcu protection for the data structure in
question. This not just scales better it also introduces overflow
protection.
However, in contrast to generic rcuref, files require a memory
barrier and thus cannot rely on *_relaxed() atomic operations and
also require to be built on atomic_long_t as having massive amounts
of reference isn't unheard of even if it is just an attack.
This adds a file specific variant instead of making this a generic
library.
This has been tested by various people and it gives consistent
improvement up to 3-5% on workloads with loads of threads.
- Add a fastpath for find_next_zero_bit(). Skip 2-levels searching
via find_next_zero_bit() when there is a free slot in the word that
contains the next fd. This improves pts/blogbench-1.1.0 read by 8%
and write by 4% on Intel ICX 160.
- Conditionally clear full_fds_bits since it's very likely that a bit
in full_fds_bits has been cleared during __clear_open_fds(). This
improves pts/blogbench-1.1.0 read up to 13%, and write up to 5% on
Intel ICX 160.
- Get rid of all lookup_*_fdget_rcu() variants. They were used to
lookup files without taking a reference count. That became invalid
once files were switched to SLAB_TYPESAFE_BY_RCU and now we're
always taking a reference count. Switch to an already existing
helper and remove the legacy variants.
- Remove pointless includes of <linux/fdtable.h>.
- Avoid cmpxchg() in close_files() as nobody else has a reference to
the files_struct at that point.
- Move close_range() into fs/file.c and fold __close_range() into it.
- Cleanup calling conventions of alloc_fdtable() and expand_files().
- Merge __{set,clear}_close_on_exec() into one.
- Make __set_open_fd() set cloexec as well instead of doing it in two
separate steps"
* tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: add file SLAB_TYPESAFE_BY_RCU recycling stressor
fs: port files to file_ref
fs: add file_ref
expand_files(): simplify calling conventions
make __set_open_fd() set cloexec state as well
fs: protect backing files with rcu
file.c: merge __{set,clear}_close_on_exec()
alloc_fdtable(): change calling conventions.
fs/file.c: add fast path in find_next_fd()
fs/file.c: conditionally clear full_fds
fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd()
move close_range(2) into fs/file.c, fold __close_range() into it
close_files(): don't bother with xchg()
remove pointless includes of <linux/fdtable.h>
get rid of ...lookup...fdget_rcu() family
|
|
Bring in the fdtable changes for this cycle.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Port files to rely on file_ref reference to improve scaling and gain
overflow protection.
- We continue to WARN during get_file() in case a file that is already
marked dead is revived as get_file() is only valid if the caller
already holds a reference to the file. This hasn't changed just the
check changes.
- The semantics for epoll and ttm's dmabuf usage have changed. Both
epoll and ttm synchronize with __fput() to prevent the underlying file
from beeing freed.
(1) epoll
Explaining epoll is straightforward using a simple diagram.
Essentially, the mutex of the epoll instance needs to be taken in both
__fput() and around epi_fget() preventing the file from being freed
while it is polled or preventing the file from being resurrected.
CPU1 CPU2
fput(file)
-> __fput(file)
-> eventpoll_release(file)
-> eventpoll_release_file(file)
mutex_lock(&ep->mtx)
epi_item_poll()
-> epi_fget()
-> file_ref_get(file)
mutex_unlock(&ep->mtx)
mutex_lock(&ep->mtx);
__ep_remove()
mutex_unlock(&ep->mtx);
-> kmem_cache_free(file)
(2) ttm dmabuf
This explanation is a bit more involved. A regular dmabuf file stashed
the dmabuf in file->private_data and the file in dmabuf->file:
file->private_data = dmabuf;
dmabuf->file = file;
The generic release method of a dmabuf file handles file specific
things:
f_op->release::dma_buf_file_release()
while the generic dentry release method of a dmabuf handles dmabuf
freeing including driver specific things:
dentry->d_release::dma_buf_release()
During ttm dmabuf initialization in ttm_object_device_init() the ttm
driver copies the provided struct dma_buf_ops into a private location:
struct ttm_object_device {
spinlock_t object_lock;
struct dma_buf_ops ops;
void (*dmabuf_release)(struct dma_buf *dma_buf);
struct idr idr;
};
ttm_object_device_init(const struct dma_buf_ops *ops)
{
// copy original dma_buf_ops in private location
tdev->ops = *ops;
// stash the release method of the original struct dma_buf_ops
tdev->dmabuf_release = tdev->ops.release;
// override the release method in the copy of the struct dma_buf_ops
// with ttm's own dmabuf release method
tdev->ops.release = ttm_prime_dmabuf_release;
}
When a new dmabuf is created the struct dma_buf_ops with the overriden
release method set to ttm_prime_dmabuf_release is passed in exp_info.ops:
DEFINE_DMA_BUF_EXPORT_INFO(exp_info);
exp_info.ops = &tdev->ops;
exp_info.size = prime->size;
exp_info.flags = flags;
exp_info.priv = prime;
The call to dma_buf_export() then sets
mutex_lock_interruptible(&prime->mutex);
dma_buf = dma_buf_export(&exp_info)
{
dmabuf->ops = exp_info->ops;
}
mutex_unlock(&prime->mutex);
which creates a new dmabuf file and then install a file descriptor to
it in the callers file descriptor table:
ret = dma_buf_fd(dma_buf, flags);
When that dmabuf file is closed we now get:
fput(file)
-> __fput(file)
-> f_op->release::dma_buf_file_release()
-> dput()
-> d_op->d_release::dma_buf_release()
-> dmabuf->ops->release::ttm_prime_dmabuf_release()
mutex_lock(&prime->mutex);
if (prime->dma_buf == dma_buf)
prime->dma_buf = NULL;
mutex_unlock(&prime->mutex);
Where we can see that prime->dma_buf is set to NULL. So when we have
the following diagram:
CPU1 CPU2
fput(file)
-> __fput(file)
-> f_op->release::dma_buf_file_release()
-> dput()
-> d_op->d_release::dma_buf_release()
-> dmabuf->ops->release::ttm_prime_dmabuf_release()
ttm_prime_handle_to_fd()
mutex_lock_interruptible(&prime->mutex)
dma_buf = prime->dma_buf
dma_buf && get_dma_buf_unless_doomed(dma_buf)
-> file_ref_get(dma_buf->file)
mutex_unlock(&prime->mutex);
mutex_lock(&prime->mutex);
if (prime->dma_buf == dma_buf)
prime->dma_buf = NULL;
mutex_unlock(&prime->mutex);
-> kmem_cache_free(file)
The logic of the mechanism is the same as for epoll: sync with
__fput() preventing the file from being freed. Here the
synchronization happens through the ttm instance's prime->mutex.
Basically, the lifetime of the dma_buf and the file are tighly
coupled.
Both (1) and (2) used to call atomic_inc_not_zero() to check whether
the file has already been marked dead and then refuse to revive it.
This is only safe because both (1) and (2) sync with __fput() and thus
prevent kmem_cache_free() on the file being called and thus prevent
the file from being immediately recycled due to SLAB_TYPESAFE_BY_RCU.
Both (1) and (2) have been ported from atomic_inc_not_zero() to
file_ref_get(). That means a file that is already in the process of
being marked as FILE_REF_DEAD:
file_ref_put()
cnt = atomic_long_dec_return()
-> __file_ref_put(cnt)
if (cnt == FIlE_REF_NOREF)
atomic_long_try_cmpxchg_release(cnt, FILE_REF_DEAD)
can be revived again:
CPU1 CPU2
file_ref_put()
cnt = atomic_long_dec_return()
-> __file_ref_put(cnt)
if (cnt == FIlE_REF_NOREF)
file_ref_get()
// Brings reference back to FILE_REF_ONEREF
atomic_long_add_negative()
atomic_long_try_cmpxchg_release(cnt, FILE_REF_DEAD)
This is fine and inherent to the file_ref_get()/file_ref_put()
semantics. For both (1) and (2) this is safe because __fput() is
prevented from making progress if file_ref_get() fails due to the
aforementioned synchronization mechanisms.
Two cases need to be considered that affect both (1) epoll and (2) ttm
dmabuf:
(i) fput()'s file_ref_put() and marks the file as FILE_REF_NOREF but
before that fput() can mark the file as FILE_REF_DEAD someone
manages to sneak in a file_ref_get() and brings the refcount back
from FILE_REF_NOREF to FILE_REF_ONEREF. In that case the original
fput() doesn't call __fput(). For epoll the poll will finish and
for ttm dmabuf the file can be used again. For ttm dambuf this is
actually an advantage because it avoids immediately allocating
a new dmabuf object.
CPU1 CPU2
file_ref_put()
cnt = atomic_long_dec_return()
-> __file_ref_put(cnt)
if (cnt == FIlE_REF_NOREF)
file_ref_get()
// Brings reference back to FILE_REF_ONEREF
atomic_long_add_negative()
atomic_long_try_cmpxchg_release(cnt, FILE_REF_DEAD)
(ii) fput()'s file_ref_put() marks the file FILE_REF_NOREF and
also suceeds in actually marking it FILE_REF_DEAD and then calls
into __fput() to free the file.
When either (1) or (2) call file_ref_get() they fail as
atomic_long_add_negative() will return true.
At the same time, both (1) and (2) all file_ref_get() under
mutexes that __fput() must also acquire preventing
kmem_cache_free() from freeing the file.
So while this might be treated as a change in semantics for (1) and
(2) it really isn't. It if should end up causing issues this can be
fixed by adding a helper that does something like:
long cnt = atomic_long_read(&ref->refcnt);
do {
if (cnt < 0)
return false;
} while (!atomic_long_try_cmpxchg(&ref->refcnt, &cnt, cnt + 1));
return true;
which would block FILE_REF_NOREF to FILE_REF_ONEREF transitions.
- Jann correctly pointed out that kmem_cache_zalloc() cannot be used
anymore once files have been ported to file_ref_t.
The kmem_cache_zalloc() call will memset() the whole struct file to
zero when it is reallocated. This will also set file->f_ref to zero
which mens that a concurrent file_ref_get() can return true:
CPU1 CPU2
__get_file_rcu()
rcu_dereference_raw()
close()
[frees file]
alloc_empty_file()
kmem_cache_zalloc()
[reallocates same file]
memset(..., 0, ...)
file_ref_get()
[increments 0->1, returns true]
init_file()
file_ref_init(..., 1)
[sets to 0]
rcu_dereference_raw()
fput()
file_ref_put()
[decrements 0->FILE_REF_NOREF, frees file]
[UAF]
causing a concurrent __get_file_rcu() call to acquire a reference to
the file that is about to be reallocated and immediately freeing it
on realizing that it has been recycled. This causes a UAF for the
task that reallocated/recycled the file.
This is prevented by switching from kmem_cache_zalloc() to
kmem_cache_alloc() and initializing the fields manually. With
file->f_ref initialized last.
Note that a memset() also isn't guaranteed to atomically update an
unsigned long so it's theoretically possible to see torn and
therefore bogus counter values.
Link: https://lore.kernel.org/r/20241007-brauner-file-rcuref-v2-3-387e24dc9163@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop it has
O(N^2) behaviour under contention with N concurrent operations and it is
in a hot path in __fget_files_rcu().
The rcuref infrastructures remedies this problem by using an
unconditional increment relying on safe- and dead zones to make this
work and requiring rcu protection for the data structure in question.
This not just scales better it also introduces overflow protection.
However, in contrast to generic rcuref, files require a memory barrier
and thus cannot rely on *_relaxed() atomic operations and also require
to be built on atomic_long_t as having massive amounts of reference
isn't unheard of even if it is just an attack.
As suggested by Linus, add a file specific variant instead of making
this a generic library.
Files are SLAB_TYPESAFE_BY_RCU and thus don't have "regular" rcu
protection. In short, freeing of files isn't delayed until a grace
period has elapsed. Instead, they are freed immediately and thus can be
reused (multiple times) within the same grace period.
So when picking a file from the file descriptor table via its file
descriptor number it is thus possible to see an elevated reference count
on file->f_count even though the file has already been recycled possibly
multiple times by another task.
To guard against this the vfs will pick the file from the file
descriptor table twice. Once before the refcount increment and once
after to compare the pointers (grossly simplified). If they match then
the file is still valid. If not the caller needs to fput() it.
The unconditional increment makes the following race possible as
illustrated by rcuref:
> Deconstruction race
> ===================
>
> The release operation must be protected by prohibiting a grace period in
> order to prevent a possible use after free:
>
> T1 T2
> put() get()
> // ref->refcnt = ONEREF
> if (!atomic_add_negative(-1, &ref->refcnt))
> return false; <- Not taken
>
> // ref->refcnt == NOREF
> --> preemption
> // Elevates ref->refcnt to ONEREF
> if (!atomic_add_negative(1, &ref->refcnt))
> return true; <- taken
>
> if (put(&p->ref)) { <-- Succeeds
> remove_pointer(p);
> kfree_rcu(p, rcu);
> }
>
> RCU grace period ends, object is freed
>
> atomic_cmpxchg(&ref->refcnt, NOREF, DEAD); <- UAF
>
> [...] it prevents the grace period which keeps the object alive until
> all put() operations complete.
Having files by SLAB_TYPESAFE_BY_RCU shouldn't cause any problems for
this deconstruction race. Afaict, the only interesting case would be
someone freeing the file and someone immediately recycling it within the
same grace period and reinitializing file->f_count to ONEREF while a
concurrent fput() is doing atomic_cmpxchg(&ref->refcnt, NOREF, DEAD) as
in the race above.
But this is safe from SLAB_TYPESAFE_BY_RCU's perspective and it should
be safe from rcuref's perspective.
T1 T2 T3
fput() fget()
// f_count->refcnt = ONEREF
if (!atomic_add_negative(-1, &f_count->refcnt))
return false; <- Not taken
// f_count->refcnt == NOREF
--> preemption
// Elevates f_count->refcnt to ONEREF
if (!atomic_add_negative(1, &f_count->refcnt))
return true; <- taken
if (put(&f_count)) { <-- Succeeds
remove_pointer(p);
/*
* Cache is SLAB_TYPESAFE_BY_RCU
* so this is freed without a grace period.
*/
kmem_cache_free(p);
}
kmem_cache_alloc()
init_file() {
// Sets f_count->refcnt to ONEREF
rcuref_long_init(&f->f_count, 1);
}
Object has been reused within the same grace period
via kmem_cache_alloc()'s SLAB_TYPESAFE_BY_RCU.
/*
* With SLAB_TYPESAFE_BY_RCU this would be a safe UAF access and
* it would work correctly because the atomic_cmpxchg()
* will fail because the refcount has been reset to ONEREF by T3.
*/
atomic_cmpxchg(&ref->refcnt, NOREF, DEAD); <- UAF
However, there are other cases to consider:
(1) Benign race due to multiple atomic_long_read()
CPU1 CPU2
file_ref_put()
// last reference
// => count goes negative/FILE_REF_NOREF
atomic_long_add_negative_release(-1, &ref->refcnt)
-> __file_ref_put()
file_ref_get()
// goes back from negative/FILE_REF_NOREF to 0
// and file_ref_get() succeeds
atomic_long_add_negative(1, &ref->refcnt)
// This is immediately followed by file_ref_put()
// managing to set FILE_REF_DEAD
file_ref_put()
// __file_ref_put() continues and sees
// cnt > FILE_REF_RELEASED // and splats with
// "imbalanced put on file reference count"
cnt = atomic_long_read(&ref->refcnt);
The race however is benign and the problem is the
atomic_long_read(). Instead of performing a separate read this uses
atomic_long_dec_return() and pass the value to __file_ref_put().
Thanks to Linus for pointing out that braino.
(2) SLAB_TYPESAFE_BY_RCU may cause recycled files to be marked dead
When a file is recycled the following race exists:
CPU1 CPU2
// @file is already dead and thus
// cnt >= FILE_REF_RELEASED.
file_ref_get(file)
atomic_long_add_negative(1, &ref->refcnt)
// We thus call into __file_ref_get()
-> __file_ref_get()
// which sees cnt >= FILE_REF_RELEASED
cnt = atomic_long_read(&ref->refcnt);
// In the meantime @file gets freed
kmem_cache_free()
// and is immediately recycled
file = kmem_cache_zalloc()
// and the reference count is reinitialized
// and the file alive again in someone
// else's file descriptor table
file_ref_init(&ref->refcnt, 1);
// the __file_ref_get() slowpath now continues
// and as it saw earlier that cnt >= FILE_REF_RELEASED
// it wants to ensure that we're staying in the middle
// of the deadzone and unconditionally sets
// FILE_REF_DEAD.
// This marks @file dead for CPU2...
atomic_long_set(&ref->refcnt, FILE_REF_DEAD);
// Caller issues a close() system call to close @file
close(fd)
file = file_close_fd_locked()
filp_flush()
// The caller sees that cnt >= FILE_REF_RELEASED
// and warns the first time...
CHECK_DATA_CORRUPTION(file_count(file) == 0)
// and then splats a second time because
// __file_ref_put() sees cnt >= FILE_REF_RELEASED
file_ref_put(&ref->refcnt);
-> __file_ref_put()
My initial inclination was to replace the unconditional
atomic_long_set() with an atomic_long_try_cmpxchg() but Linus
pointed out that:
> I think we should just make file_ref_get() do a simple
>
> return !atomic_long_add_negative(1, &ref->refcnt));
>
> and nothing else. Yes, multiple CPU's can race, and you can increment
> more than once, but the gap - even on 32-bit - between DEAD and
> becoming close to REF_RELEASED is so big that we simply don't care.
> That's the point of having a gap.
I've been testing this with will-it-scale using fstat() on a machine
that Jens gave me access (thank you very much!):
processor : 511
vendor_id : AuthenticAMD
cpu family : 25
model : 160
model name : AMD EPYC 9754 128-Core Processor
and I consistently get a 3-5% improvement on 256+ threads.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202410151043.5d224a27-oliver.sang@intel.com
Closes: https://lore.kernel.org/all/202410151611.f4cd71f2-oliver.sang@intel.com
Link: https://lore.kernel.org/r/20241007-brauner-file-rcuref-v2-2-387e24dc9163@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All callers treat 0 and 1 returned by expand_files() in the same way
now since the call in alloc_fd() had been made conditional. Just make
it return 0 on success and be done with it...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
->close_on_exec[] state is maintained only for opened descriptors;
as the result, anything that marks a descriptor opened has to
set its cloexec state explicitly.
As the result, all calls of __set_open_fd() are followed by
__set_close_on_exec(); might as well fold it into __set_open_fd()
so that cloexec state is defined as soon as the descriptor is
marked opened.
[braino fix folded]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Alice Ryhl <aliceryhl@google.com> says:
This patchset contains the file abstractions needed by the Rust
implementation of the B |
