aboutsummaryrefslogtreecommitdiff
path: root/fs/ceph/snap.c
AgeCommit message (Collapse)AuthorFilesLines
2025-12-10ceph: Amend checking to fix `make W=1` build breakageAndy Shevchenko1-1/+1
In a few cases the code compares 32-bit value to a SIZE_MAX derived constant which is much higher than that value on 64-bit platforms, Clang, in particular, is not happy about this fs/ceph/snap.c:377:10: error: result of comparison of constant 2305843009213693948 with expression of type 'u32' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare] 377 | if (num > (SIZE_MAX - sizeof(*snapc)) / sizeof(u64)) | ~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by casting to size_t. Note, that possible replacement of SIZE_MAX by U32_MAX may lead to the behaviour changes on the corner cases. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-11-10Merge tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-clientLinus Torvalds1-86/+106
Pull ceph updates from Ilya Dryomov: - support for idmapped mounts in CephFS (Christian Brauner, Alexander Mikhalitsyn). The series was originally developed by Christian and later picked up and brought over the finish line by Alexander, who also contributed an enabler on the MDS side (separate owner_{u,g}id fields on the wire). The required exports for mnt_idmap_{get,put}() in VFS have been acked by Christian and received no objection from Christoph. - a churny change in CephFS logging to include cluster and client identifiers in log and debug messages (Xiubo Li). This would help in scenarios with dozens of CephFS mounts on the same node which are getting increasingly common, especially in the Kubernetes world. * tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client: ceph: allow idmapped mounts ceph: allow idmapped atomic_open inode op ceph: allow idmapped set_acl inode op ceph: allow idmapped setattr inode op ceph: pass idmap to __ceph_setattr ceph: allow idmapped permission inode op ceph: allow idmapped getattr inode op ceph: pass an idmapping to mknod/symlink/mkdir ceph: add enable_unsafe_idmap module parameter ceph: handle idmapped mounts in create_request_message() ceph: stash idmapping in mdsc request fs: export mnt_idmap_get/mnt_idmap_put libceph, ceph: move mdsmap.h to fs/ceph ceph: print cluster fsid and client global_id in all debug logs ceph: rename _to_client() to _to_fs_client() ceph: pass the mdsc to several helpers libceph: add doutc and *_client debug macros support
2023-11-03ceph: print cluster fsid and client global_id in all debug logsXiubo Li1-79/+95
Multiple CephFS mounts on a host is increasingly common so disambiguating messages like this is necessary and will make it easier to debug issues. At the same this will improve the debug logs to make them easier to troubleshooting issues, such as print the ino# instead only printing the memory addresses of the corresponding inodes and print the dentry names instead of the corresponding memory addresses for the dentry,etc. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-11-03ceph: rename _to_client() to _to_fs_client()Xiubo Li1-1/+1
We need to covert the inode to ceph_client in the following commit, and will add one new helper for that, here we rename the old helper to _fs_client(). Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-11-03ceph: pass the mdsc to several helpersXiubo Li1-6/+10
We will use the 'mdsc' to get the global_id in the following commits. Link: https://tracker.ceph.com/issues/61590 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Patrick Donnelly <pdonnell@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-10-18ceph: convert to new timestamp accessorsJeff Layton1-2/+2
Convert to using the new inode timestamp accessor functions. Signed-off-by: Jeff Layton <jlayton@kernel.org> Link: https://lore.kernel.org/r/20231004185347.80880-22-jlayton@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-09-06Merge tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-clientLinus Torvalds1-4/+6
Pull ceph updates from Ilya Dryomov: "Mixed with some fixes and cleanups, this brings in reasonably complete fscrypt support to CephFS! The list of things which don't work with encryption should be fairly short, mostly around the edges: fallocate (not supported well in CephFS to begin with), copy_file_range (requires re-encryption), non-default striping patterns. This was a multi-year effort principally by Jeff Layton with assistance from Xiubo Li, Luís Henriques and others, including several dependant changes in the MDS, netfs helper library and fscrypt framework itself" * tag 'ceph-for-6.6-rc1' of https://github.com/ceph/ceph-client: (53 commits) ceph: make num_fwd and num_retry to __u32 ceph: make members in struct ceph_mds_request_args_ext a union rbd: use list_for_each_entry() helper libceph: do not include crypto/algapi.h ceph: switch ceph_lookup/atomic_open() to use new fscrypt helper ceph: fix updating i_truncate_pagecache_size for fscrypt ceph: wait for OSD requests' callbacks to finish when unmounting ceph: drop messages from MDS when unmounting ceph: update documentation regarding snapshot naming limitations ceph: prevent snapshot creation in encrypted locked directories ceph: add support for encrypted snapshot names ceph: invalidate pages when doing direct/sync writes ceph: plumb in decryption during reads ceph: add encryption support to writepage and writepages ceph: add read/modify/write to ceph_sync_write ceph: align data in pages in ceph_sync_write ceph: don't use special DIO path for encrypted inodes ceph: add truncate size handling support for fscrypt ceph: add object version support for sync read libceph: allow ceph_osdc_new_request to accept a multi-op read ...
2023-08-24ceph: drop messages from MDS when unmountingXiubo Li1-4/+6
When unmounting all the dirty buffers will be flushed and after the last osd request is finished the last reference of the i_count will be released. Then it will flush the dirty cap/snap to MDSs, and the unmounting won't wait the possible acks, which will ihold the inodes when updating the metadata locally but makes no sense any more, of this. This will make the evict_inodes() to skip these inodes. If encrypt is enabled the kernel generate a warning when removing the encrypt keys when the skipped inodes still hold the keyring: WARNING: CPU: 4 PID: 168846 at fs/crypto/keyring.c:242 fscrypt_destroy_keyring+0x7e/0xd0 CPU: 4 PID: 168846 Comm: umount Tainted: G S 6.1.0-rc5-ceph-g72ead199864c #1 Hardware name: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015 RIP: 0010:fscrypt_destroy_keyring+0x7e/0xd0 RSP: 0018:ffffc9000b277e28 EFLAGS: 00010202 RAX: 0000000000000002 RBX: ffff88810d52ac00 RCX: ffff88810b56aa00 RDX: 0000000080000000 RSI: ffffffff822f3a09 RDI: ffff888108f59000 RBP: ffff8881d394fb88 R08: 0000000000000028 R09: 0000000000000000 R10: 0000000000000001 R11: 11ff4fe6834fcd91 R12: ffff8881d394fc40 R13: ffff888108f59000 R14: ffff8881d394f800 R15: 0000000000000000 FS: 00007fd83f6f1080(0000) GS:ffff88885fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f918d417000 CR3: 000000017f89a005 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> generic_shutdown_super+0x47/0x120 kill_anon_super+0x14/0x30 ceph_kill_sb+0x36/0x90 [ceph] deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x67/0xb0 exit_to_user_mode_prepare+0x23d/0x240 syscall_exit_to_user_mode+0x25/0x60 do_syscall_64+0x40/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fd83dc39e9b Later the kernel will crash when iput() the inodes and dereferencing the "sb->s_master_keys", which has been released by the generic_shutdown_super(). Link: https://tracker.ceph.com/issues/59162 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-and-tested-by: Luís Henriques <lhenriques@suse.de> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-07-13ceph: convert to ctime accessor functionsJeff Layton1-1/+1
In later patches, we're going to change how the inode's ctime field is used. Switch to using accessor functions instead of raw accesses of inode->i_ctime. Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230705190309.579783-28-jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-06-30ceph: trigger to flush the buffer when making snapshotXiubo Li1-3/+6
The 'i_wr_ref' is used to track the 'Fb' caps, while whenever the 'Fb' caps is took the kclient will always take the 'Fw' caps at the same time. That means it will always be a false check in __ceph_finish_cap_snap(). When writing to buffer the kclient will take both 'Fb|Fw' caps and then write the contents to the buffer pages by increasing the 'i_wrbuffer_ref' and then just release both 'Fb|Fw'. This is different with the user space libcephfs, which will keep the 'Fb' being took and use 'i_wr_ref' instead of 'i_wrbuffer_ref' to track this until the buffer is flushed to Rados. We need to defer flushing the capsnap until the corresponding buffer pages are all flushed to Rados, and at the same time just trigger to flush the buffer pages immediately. Link: https://tracker.ceph.com/issues/48640 Link: https://tracker.ceph.com/issues/59343 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-06-08ceph: fix use-after-free bug for inodes when flushing capsnapsXiubo Li1-1/+3
There is a race between capsnaps flush and removing the inode from 'mdsc->snap_flush_list' list: == Thread A == == Thread B == ceph_queue_cap_snap() -> allocate 'capsnapA' ->ihold('&ci->vfs_inode') ->add 'capsnapA' to 'ci->i_cap_snaps' ->add 'ci' to 'mdsc->snap_flush_list' ... == Thread C == ceph_flush_snaps() ->__ceph_flush_snaps() ->__send_flush_snap() handle_cap_flushsnap_ack() ->iput('&ci->vfs_inode') this also will release 'ci' ... == Thread D == ceph_handle_snap() ->flush_snaps() ->iterate 'mdsc->snap_flush_list' ->get the stale 'ci' ->remove 'ci' from ->ihold(&ci->vfs_inode) this 'mdsc->snap_flush_list' will WARNING To fix this we will increase the inode's i_count ref when adding 'ci' to the 'mdsc->snap_flush_list' list. [ idryomov: need_put int -> bool ] Cc: stable@vger.kernel.org Link: https://bugzilla.redhat.com/show_bug.cgi?id=2209299 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-05-18ceph: force updating the msg pointer in non-split caseXiubo Li1-0/+13
When the MClientSnap reqeust's op is not CEPH_SNAP_OP_SPLIT the request may still contain a list of 'split_realms', and we need to skip it anyway. Or it will be parsed as a corrupt snaptrace. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/61200 Reported-by: Frank Schilder <frans@dtu.dk> Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2023-02-02ceph: blocklist the kclient when receiving corrupted snap traceXiubo Li1-2/+34
When received corrupted snap trace we don't know what exactly has happened in MDS side. And we shouldn't continue IOs and metadatas access to MDS, which may corrupt or get incorrect contents. This patch will just block all the further IO/MDS requests immediately and then evict the kclient itself. The reason why we still need to evict the kclient just after blocking all the further IOs is that the MDS could revoke the caps faster. Link: https://tracker.ceph.com/issues/57686 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-11-14ceph: avoid putting the realm twice when decoding snaps failsXiubo Li1-1/+2
When decoding the snaps fails it maybe leaving the 'first_realm' and 'realm' pointing to the same snaprealm memory. And then it'll put it twice and could cause random use-after-free, BUG_ON, etc issues. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/57686 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-06-09netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_contextDavid Howells1-4/+4
While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-01ceph: misc fix for code style and logsXiubo Li1-60/+62
To make the logs more readable such as for log likes: ceph: will move 00000000a42b796b to split realm 100000003ed 000000007146df45 With this it will always show the inode numbers instead the inode addresses. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-03-01ceph: allocate capsnap memory outside of ceph_queue_cap_snap()Xiubo Li1-18/+28
This will reduce very possible but unnecessary frequently memory allocate/free in this loop. URL: https://tracker.ceph.com/issues/44100 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-03-01ceph: do not release the global snaprealm until unmountingXiubo Li1-2/+11
The global snaprealm would be created and then destroyed immediately every time when updating it. URL: https://tracker.ceph.com/issues/54362 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-03-01ceph: eliminate the recursion when rebuilding the snap contextXiubo Li1-9/+48
Use a list instead of recursion to avoid possible stack overflow. Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-03-01ceph: do not update snapshot context when there is no new snapshotXiubo Li1-9/+19
We will only track the uppest parent snapshot realm from which we need to rebuild the snapshot contexts _downward_ in hierarchy. For all the others having no new snapshot we will do nothing. This fix will avoid calling ceph_queue_cap_snap() on some inodes inappropriately. For example, with the code in mainline, suppose there are 2 directory hierarchies (with 6 directories total), like this: /dir_X1/dir_X2/dir_X3/ /dir_Y1/dir_Y2/dir_Y3/ Firstly, make a snapshot under /dir_X1/dir_X2/.snap/snap_X2, then make a root snapshot under /.snap/root_snap. Every time we make snapshots under /dir_Y1/..., the kclient will always try to rebuild the snap context for snap_X2 realm and finally will always try to queue cap snaps for dir_Y2 and dir_Y3, which makes no sense. That's because the snap_X2's seq is 2 and root_snap's seq is 3. So when creating a new snapshot under /dir_Y1/... the new seq will be 4, and the mds will send the kclient a snapshot backtrace in _downward_ order: seqs 4, 3. When ceph_update_snap_trace() is called, it will always rebuild the from the last realm, that's the root_snap. So later when rebuilding the snap context, the current logic will always cause it to rebuild the snap_X2 realm and then try to queue cap snaps for all the inodes related in that realm, even though it's not necessary. This is accompanied by a lot of these sorts of dout messages: "ceph: queue_cap_snap 00000000a42b796b nothing dirty|writing" Fix the logic to avoid this situation. Also, the 'invalidate' word is not precise here. In actuality, it will cause a rebuild of the existing snapshot contexts or just build non-existent ones. Rename it to 'rebuild_snapcs'. URL: https://tracker.ceph.com/issues/44100 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2022-03-01ceph: move to a dedicated slabcache for ceph_cap_snapXiubo Li1-2/+3
There could be huge number of capsnaps around at any given time. On x86_64 the structure is 248 bytes, which will be rounded up to 256 bytes by kzalloc. Move this to a dedicated slabcache to save 8 bytes for each. [ jlayton: use kmem_cache_zalloc ] Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-09-02ceph: add ceph_change_snap_realm() helperJeff Layton1-20/+39
Consolidate some fiddly code for changing an inode's snap_realm into a new helper function, and change the callers to use it. While we're in here, nothing uses the i_snap_realm_counter field, so remove that from the inode. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Luis Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-08-25ceph: correctly handle releasing an embedded cap flushXiubo Li1-0/+3
The ceph_cap_flush structures are usually dynamically allocated, but the ceph_cap_snap has an embedded one. When force umounting, the client will try to remove all the session caps. During this, it will free them, but that should not be done with the ones embedded in a capsnap. Fix this by adding a new boolean that indicates that the cap flush is embedded in a capsnap, and skip freeing it if that's set. At the same time, switch to using list_del_init() when detaching the i_list and g_list heads. It's possible for a forced umount to remove these objects but then handle_cap_flushsnap_ack() races in and does the list_del_init() again, corrupting memory. Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/52283 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-08-04ceph: take snap_empty_lock atomically with snaprealm refcount changeJeff Layton1-17/+17
There is a race in ceph_put_snap_realm. The change to the nref and the spinlock acquisition are not done atomically, so you could decrement nref, and before you take the spinlock, the nref is incremented again. At that point, you end up putting it on the empty list when it shouldn't be there. Eventually __cleanup_empty_realms runs and frees it when it's still in-use. Fix this by protecting the 1->0 transition with atomic_dec_and_lock, and just drop the spinlock if we can get the rwsem. Because these objects can also undergo a 0->1 refcount transition, we must protect that change as well with the spinlock. Increment locklessly unless the value is at 0, in which case we take the spinlock, increment and then take it off the empty list if it did the 0->1 transition. With these changes, I'm removing the dout() messages from these functions, as well as in __put_snap_realm. They've always been racy, and it's better to not print values that may be misleading. Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/46419 Reported-by: Mark Nelson <mnelson@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Luis Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-29ceph: eliminate ceph_async_iput()Jeff Layton1-11/+5
Now that we don't need to hold session->s_mutex or the snap_rwsem when calling ceph_check_caps, we can eliminate ceph_async_iput and just use normal iput calls. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-29ceph: don't take s_mutex in ceph_flush_snapsJeff Layton1-4/+1
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Luis Henriques <lhenriques@suse.de> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-29ceph: clean up locking annotation for ceph_get_snap_realm and ↵Jeff Layton1-4/+4
__lookup_snap_realm They both say that the snap_rwsem must be held for write, but I don't see any real reason for it, and it's not currently always called that way. The lookup is just walking the rbtree, so holding it for read should be fine there. The "get" is bumping the refcount and (possibly) removing it from the empty list. I see no need to hold the snap_rwsem for write for that. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-29ceph: add some lockdep assertions around snaprealm handlingJeff Layton1-0/+16
Turn some comments into lockdep asserts. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-29ceph: decoding error in ceph_update_snap_realm should return -EIOJeff Layton1-1/+1
Currently ceph_update_snap_realm returns -EINVAL when it hits a decoding error, which is the wrong error code. -EINVAL implies that the user gave us a bogus argument to a syscall or something similar. -EIO is more descriptive when we hit a decoding error. Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-06-28ceph: make ceph_queue_cap_snap staticJeff Layton1-1/+1
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-04-27ceph: fix up some bare fetches of i_sizeJeff Layton1-1/+1
We need to use i_size_read(), which properly handles the torn read case on 32-bit arches. Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2021-02-16ceph: defer flushing the capsnap if the Fb is usedXiubo Li1-0/+10
If the Fb cap is used it means the current inode is flushing the dirty data to OSD, just defer flushing the capsnap. URL: https://tracker.ceph.com/issues/48640 Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-11-04ceph: check session state after bumping session->s_seqJeff Layton1-1/+1
Some messages sent by the MDS entail a session sequence number increment, and the MDS will drop certain types of requests on the floor when the sequence numbers don't match. In particular, a REQUEST_CLOSE message can cross with one of the sequence morphing messages from the MDS which can cause the client to stall, waiting for a response that will never come. Originally, this meant an up to 5s delay before the recurring workqueue job kicked in and resent the request, but a recent change made it so that the client would never resend, causing a 60s stall unmounting and sometimes a blockisting event. Add a new helper for incrementing the session sequence and then testing to see whether a REQUEST_CLOSE needs to be resent, and move the handling of CEPH_MDS_SESSION_CLOSING into that function. Change all of the bare sequence counter increments to use the new helper. Reorganize check_session_state with a switch statement. It should no longer be called when the session is CLOSING, so throw a warning if it ever is (but still handle that case sanely). [ idryomov: whitespace, pr_err() call fixup ] URL: https://tracker.ceph.com/issues/47563 Fixes: fa9967734227 ("ceph: fix potential mdsc use-after-free crash") Reported-by: Patrick Donnelly <pdonnell@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-10-12ceph: add ceph_sb_to_mdsc helper support to parse the mdscXiubo Li1-1/+1
This will help simplify the code. [ jlayton: fix minor merge conflict in quota.c ] Signed-off-by: Xiubo Li <xiubli@redhat.com> Signed-off-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2020-03-23ceph: fix memory leak in ceph_cleanup_snapid_map()Luis Henriques1-0/+1
kmemleak reports the following memory leak: unreferenced object 0xffff88821feac8a0 (size 96): comm "kworker/1:0", pid 17, jiffies 4294896362 (age 20.512s) hex dump (first 32 bytes): a0 c8 ea 1f 82 88 ff ff 00 c9 ea 1f 82 88 ff ff ................ 00 00 00 00 00 00 00 00 00 01 00 00 00 00 ad de ................ backtrace: [<00000000b3ea77fb>] ceph_get_snapid_map+0x75/0x2a0 [<00000000d4060942>] fill_inode+0xb26/0x1010 [<0000000049da6206>] ceph_readdir_prepopulate+0x389/0xc40 [<00000000e2fe2549>] dispatch+0x11ab/0x1521 [<000000007700b894>] ceph_con_workfn+0xf3d/0x3240 [<0000000039138a41>] process_one_work+0x24d/0x590 [<00000000eb751f34>] worker_thread+0x4a/0x3d0 [<000000007e8f0d42>] kthread+0xfb/0x130 [<00000000d49bd1fa>] ret_from_fork+0x3a/0x50 A kfree is missing while looping the 'to_free' list of ceph_snapid_map objects. Cc: stable@vger.kernel.org Fixes: 75c9627efb72 ("ceph: map snapid to anonymous bdev ID") Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-08-22ceph: fix buffer free while holding i_ceph_lock in __ceph_build_xattrs_blob()Luis Henriques1-1/+3
Calling ceph_buffer_put() in __ceph_build_xattrs_blob() may result in freeing the i_xattrs.blob buffer while holding the i_ceph_lock. This can be fixed by having this function returning the old blob buffer and have the callers of this function freeing it when the lock is released. The following backtrace was triggered by fstests generic/117. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 649, name: fsstress 4 locks held by fsstress/649: #0: 00000000a7478e7e (&type->s_umount_key#19){++++}, at: iterate_supers+0x77/0xf0 #1: 00000000f8de1423 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: ceph_check_caps+0x7b/0xc60 #2: 00000000562f2b27 (&s->s_mutex){+.+.}, at: ceph_check_caps+0x3bd/0xc60 #3: 00000000f83ce16a (&mdsc->snap_rwsem){++++}, at: ceph_check_caps+0x3ed/0xc60 CPU: 1 PID: 649 Comm: fsstress Not tainted 5.2.0+ #439 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 __ceph_build_xattrs_blob+0x12b/0x170 __send_cap+0x302/0x540 ? __lock_acquire+0x23c/0x1e40 ? __mark_caps_flushing+0x15c/0x280 ? _raw_spin_unlock+0x24/0x30 ceph_check_caps+0x5f0/0xc60 ceph_flush_dirty_caps+0x7c/0x150 ? __ia32_sys_fdatasync+0x20/0x20 ceph_sync_fs+0x5a/0x130 iterate_supers+0x8f/0xf0 ksys_sync+0x4f/0xb0 __ia32_sys_sync+0xa/0x10 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fc6409ab617 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08ceph: handle change_attr in cap messagesJeff Layton1-0/+2
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-07-08ceph: handle btime in cap messagesJeff Layton1-0/+1
Signed-off-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-06-05ceph: avoid iput_final() while holding mutex or in dispatch threadYan, Zheng1-5/+11
iput_final() may wait for reahahead pages. The wait can cause deadlock. For example: Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: schedule+0x36/0x80 io_schedule+0x16/0x40 __lock_page+0x101/0x140 truncate_inode_pages_range+0x556/0x9f0 truncate_inode_pages_final+0x4d/0x60 evict+0x182/0x1a0 iput+0x1d2/0x220 iterate_session_caps+0x82/0x230 [ceph] dispatch+0x678/0xa80 [ceph] ceph_con_workfn+0x95b/0x1560 [libceph] process_one_work+0x14d/0x410 worker_thread+0x4b/0x460 kthread+0x105/0x140 ret_from_fork+0x22/0x40 Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: __schedule+0x3d6/0x8b0 schedule+0x36/0x80 schedule_preempt_disabled+0xe/0x10 mutex_lock+0x2f/0x40 ceph_check_caps+0x505/0xa80 [ceph] ceph_put_wrbuffer_cap_refs+0x1e5/0x2c0 [ceph] writepages_finish+0x2d3/0x410 [ceph] __complete_request+0x26/0x60 [libceph] handle_reply+0x6c8/0xa10 [libceph] dispatch+0x29a/0xbb0 [libceph] ceph_con_workfn+0x95b/0x1560 [libceph] process_one_work+0x14d/0x410 worker_thread+0x4b/0x460 kthread+0x105/0x140 ret_from_fork+0x22/0x40 In above example, truncate_inode_pages_range() waits for readahead pages while holding s_mutex. ceph_check_caps() waits for s_mutex and blocks OSD dispatch thread. Later OSD replies (for readahead) can't be handled. ceph_check_caps() also may lock snap_rwsem for read. So similar deadlock can happen if iput_final() is called while holding snap_rwsem. In general, it's not good to call iput_final() inside MDS/OSD dispatch threads or while holding any mutex. The fix is introducing ceph_async_iput(), which calls iput_final() in workqueue. Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-04-23ceph: fix ci->i_head_snapc leakYan, Zheng1-1/+6
We missed two places that i_wrbuffer_ref_head, i_wr_ref, i_dirty_caps and i_flushing_caps may change. When they are all zeros, we should free i_head_snapc. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/38224 Reported-and-tested-by: Luis Henriques <lhenriques@suse.com> Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05ceph: map snapid to anonymous bdev IDYan, Zheng1-2/+154
ceph_getattr() return zero dev ID for head inodes and set dev ID to snapid directly for snaphost inodes. This is not good because userspace utilities may consider device ID of 0 as invalid, snapid may conflict with other device's ID. This patch introduces "snapids to anonymous bdev IDs" map. we create a new mapping when we see a snapid for the first time. we trim unused mapping after it is ilde for 5 minutes. Link: http://tracker.ceph.com/issues/22353 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Acked-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-05ceph: split large reconnect into multiple messagesYan, Zheng1-0/+3
Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-02-18ceph: avoid repeatedly adding inode to mdsc->snap_flush_listYan, Zheng1-1/+2
Otherwise, mdsc->snap_flush_list may get corrupted. Cc: stable@vger.kernel.org Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-08-02ceph: use timespec64 for inode timestampArnd Bergmann1-3/+3
Since the vfs structures are all using timespec64, we can now change the internal representation, using ceph_encode_timespec64 and ceph_decode_timespec64. In case of ceph_aux_inode however, we need to avoid doing a memcmp() on uninitialized padding data, so the members of the i_mtime field get copied individually into 64-bit integers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-06-05vfs: change inode times to use struct timespec64Deepa Dinamani1-3/+3
struct timespec is not y2038 safe. Transition vfs to use y2038 safe struct timespec64 instead. The change was made with the help of the following cocinelle script. This catches about 80% of the changes. All the header file and logic changes are included in the first 5 rules. The rest are trivial substitutions. I avoid changing any of the function signatures or any other filesystem specific data structures to keep the patch simple for review. The script can be a little shorter by combining different cases. But, this version was sufficient for my usecase. virtual patch @ depends on patch @ identifier now; @@ - struct timespec + struct timespec64 current_time ( ... ) { - struct timespec now = current_kernel_time(); + struct timespec64 now = current_kernel_time64(); ... - return timespec_trunc( + return timespec64_trunc( ... ); } @ depends on patch @ identifier xtime; @@ struct \( iattr \| inode \| kstat \) { ... - struct timespec xtime; + struct timespec64 xtime; ... } @ depends on patch @ identifier t; @@ struct inode_operations { ... int (*update_time) (..., - struct timespec t, + struct timespec64 t, ...); ... } @ depends on patch @ identifier t; identifier fn_update_time =~ "update_time$"; @@ fn_update_time (..., - struct timespec *t, + struct timespec64 *t, ...) { ... } @ depends on patch @ identifier t; @@ lease_get_mtime( ... , - struct timespec *t + struct timespec64 *t ) { ... } @te depends on patch forall@ identifier ts; local idexpression struct inode *inode_node; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn_update_time =~ "update_time$"; identifier fn; expression e, E3; local idexpression struct inode *node1; local idexpression struct inode *node2; local idexpression struct iattr *attr1; local idexpression struct iattr *attr2; local idexpression struct iattr attr; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; @@ ( ( - struct timespec ts; + struct timespec64 ts; | - struct timespec ts = current_time(inode_node); + struct timespec64 ts = current_time(inode_node); ) <+... when != ts ( - timespec_equal(&inode_node->i_xtime, &ts) + timespec64_equal(&inode_node->i_xtime, &ts) | - timespec_equal(&ts, &inode_node->i_xtime) + timespec64_equal(&ts, &inode_node->i_xtime) | - timespec_compare(&inode_node->i_xtime, &ts) + timespec64_compare(&inode_node->i_xtime, &ts) | - timespec_compare(&ts, &inode_node->i_xtime) + timespec64_compare(&ts, &inode_node->i_xtime) | ts = current_time(e) | fn_update_time(..., &ts,...) | inode_node->i_xtime = ts | node1->i_xtime = ts | ts = inode_node->i_xtime | <+... attr1->ia_xtime ...+> = ts | ts = attr1->ia_xtime | ts.tv_sec | ts.tv_nsec | btrfs_set_stack_timespec_sec(..., ts.tv_sec) | btrfs_set_stack_timespec_nsec(..., ts.tv_nsec) | - ts = timespec64_to_timespec( + ts = ... -) | - ts = ktime_to_timespec( + ts = ktime_to_timespec64( ...) | - ts = E3 + ts = timespec_to_timespec64(E3) | - ktime_get_real_ts(&ts) + ktime_get_real_ts64(&ts) | fn(..., - ts + timespec64_to_timespec(ts) ,...) ) ...+> ( <... when != ts - return ts; + return timespec64_to_timespec(ts); ...> ) | - timespec_equal(&node1->i_xtime1, &node2->i_xtime2) + timespec64_equal(&node1->i_xtime2, &node2->i_xtime2) | - timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2) + timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2) | - timespec_compare(&node1->i_xtime1, &node2->i_xtime2) + timespec64_compare(&node1->i_xtime1, &node2->i_xtime2) | node1->i_xtime1 = - timespec_trunc(attr1->ia_xtime1, + timespec64_trunc(attr1->ia_xtime1, ...) | - attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2, + attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2, ...) | - ktime_get_real_ts(&attr1->ia_xtime1) + ktime_get_real_ts64(&attr1->ia_xtime1) | - ktime_get_real_ts(&attr.ia_xtime1) + ktime_get_real_ts64(&attr.ia_xtime1) ) @ depends on patch @ struct inode *node; struct iattr *attr; identifier fn; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; expression e; @@ ( - fn(node->i_xtime); + fn(timespec64_to_timespec(node->i_xtime)); | fn(..., - node->i_xtime); + timespec64_to_timespec(node->i_xtime)); | - e = fn(attr->ia_xtime); + e = fn(timespec64_to_timespec(attr->ia_xtime)); ) @ depends on patch forall @ struct inode *node; struct iattr *attr; identifier i_xtime =~ "^i_[acm]time$"; identifier ia_xtime =~ "^ia_[acm]time$"; identifier fn; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); fn (..., - &attr->ia_xtime, + &ts, ...); ) ...+> } @ depends on patch forall @ struct inode *node; struct iattr *attr; struct kstat *stat; identifier ia_xtime =~ "^ia_[acm]time$"; identifier i_xtime =~ "^i_[acm]time$"; identifier xtime =~ "^[acm]time$"; identifier fn, ret; @@ { + struct timespec ts; <+... ( + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime, + &ts, ...); | + ts = timespec64_to_timespec(node->i_xtime); ret = fn (..., - &node->i_xtime); + &ts); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime, + &ts, ...); | + ts = timespec64_to_timespec(attr->ia_xtime); ret = fn (..., - &attr->ia_xtime); + &ts); | + ts = timespec64_to_timespec(stat->xtime); ret = fn (..., - &stat->xtime); + &ts); ) ...+> } @ depends on patch @ struct inode *node; struct inode *node2; identifier i_xtime1 =~ "^i_[acm]time$"; identifier i_xtime2 =~ "^i_[acm]time$"; identifier i_xtime3 =~ "^i_[acm]time$"; struct iattr *attrp; struct iattr *attrp2; struct iattr attr ; identifier ia_xtime1 =~ "^ia_[acm]time$"; identifier ia_xtime2 =~ "^ia_[acm]time$"; struct kstat *stat; struct kstat stat1; struct timespec64 ts; identifier xtime =~ "^[acmb]time$"; expression e; @@ ( ( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ; | node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \); | node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \); | stat->xtime = node2->i_xtime1; | stat1.xtime = node2->i_xtime1; | ( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ; | ( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2; | - e = node->i_xtime1; + e = timespec64_to_timespec( node->i_xtime1 ); | - e = attrp->ia_xtime1; + e = timespec64_to_timespec( at