| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull persistent dentry infrastructure and conversion from Al Viro:
"Some filesystems use a kinda-sorta controlled dentry refcount leak to
pin dentries of created objects in dcache (and undo it when removing
those). A reference is grabbed and not released, but it's not actually
_stored_ anywhere.
That works, but it's hard to follow and verify; among other things, we
have no way to tell _which_ of the increments is intended to be an
unpaired one. Worse, on removal we need to decide whether the
reference had already been dropped, which can be non-trivial if that
removal is on umount and we need to figure out if this dentry is
pinned due to e.g. unlink() not done. Usually that is handled by using
kill_litter_super() as ->kill_sb(), but there are open-coded special
cases of the same (consider e.g. /proc/self).
Things get simpler if we introduce a new dentry flag
(DCACHE_PERSISTENT) marking those "leaked" dentries. Having it set
claims responsibility for +1 in refcount.
The end result this series is aiming for:
- get these unbalanced dget() and dput() replaced with new primitives
that would, in addition to adjusting refcount, set and clear
persistency flag.
- instead of having kill_litter_super() mess with removing the
remaining "leaked" references (e.g. for all tmpfs files that hadn't
been removed prior to umount), have the regular
shrink_dcache_for_umount() strip DCACHE_PERSISTENT of all dentries,
dropping the corresponding reference if it had been set. After that
kill_litter_super() becomes an equivalent of kill_anon_super().
Doing that in a single step is not feasible - it would affect too many
places in too many filesystems. It has to be split into a series.
This work has really started early in 2024; quite a few preliminary
pieces have already gone into mainline. This chunk is finally getting
to the meat of that stuff - infrastructure and most of the conversions
to it.
Some pieces are still sitting in the local branches, but the bulk of
that stuff is here"
* tag 'pull-persistency' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (54 commits)
d_make_discardable(): warn if given a non-persistent dentry
kill securityfs_recursive_remove()
convert securityfs
get rid of kill_litter_super()
convert rust_binderfs
convert nfsctl
convert rpc_pipefs
convert hypfs
hypfs: swich hypfs_create_u64() to returning int
hypfs: switch hypfs_create_str() to returning int
hypfs: don't pin dentries twice
convert gadgetfs
gadgetfs: switch to simple_remove_by_name()
convert functionfs
functionfs: switch to simple_remove_by_name()
functionfs: fix the open/removal races
functionfs: need to cancel ->reset_work in ->kill_sb()
functionfs: don't bother with ffs->ref in ffs_data_{opened,closed}()
functionfs: don't abuse ffs_data_closed() on fs shutdown
convert selinuxfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull cred guard updates from Christian Brauner:
"This contains substantial credential infrastructure improvements
adding guard-based credential management that simplifies code and
eliminates manual reference counting in many subsystems.
Features:
- Kernel Credential Guards
Add with_kernel_creds() and scoped_with_kernel_creds() guards that
allow using the kernel credentials without allocating and copying
them. This was requested by Linus after seeing repeated
prepare_kernel_creds() calls that duplicate the kernel credentials
only to drop them again later.
The new guards completely avoid the allocation and never expose the
temporary variable to hold the kernel credentials anywhere in
callers.
- Generic Credential Guards
Add scoped_with_creds() guards for the common override_creds() and
revert_creds() pattern. This builds on earlier work that made
override_creds()/revert_creds() completely reference count free.
- Prepare Credential Guards
Add prepare credential guards for the more complex pattern of
preparing a new set of credentials and overriding the current
credentials with them:
- prepare_creds()
- modify new creds
- override_creds()
- revert_creds()
- put_cred()
Cleanups:
- Make init_cred static since it should not be directly accessed
- Add kernel_cred() helper to properly access the kernel credentials
- Fix scoped_class() macro that was introduced two cycles ago
- coredump: split out do_coredump() from vfs_coredump() for cleaner
credential handling
- coredump: move revert_cred() before coredump_cleanup()
- coredump: mark struct mm_struct as const
- coredump: pass struct linux_binfmt as const
- sev-dev: use guard for path"
* tag 'kernel-6.19-rc1.cred' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
trace: use override credential guard
trace: use prepare credential guard
coredump: use override credential guard
coredump: use prepare credential guard
coredump: split out do_coredump() from vfs_coredump()
coredump: mark struct mm_struct as const
coredump: pass struct linux_binfmt as const
coredump: move revert_cred() before coredump_cleanup()
sev-dev: use override credential guards
sev-dev: use prepare credential guard
sev-dev: use guard for path
cred: add prepare credential guard
net/dns_resolver: use credential guards in dns_query()
cgroup: use credential guards in cgroup_attach_permissions()
act: use credential guards in acct_write_process()
smb: use credential guards in cifs_get_spnego_key()
nfs: use credential guards in nfs_idmap_get_key()
nfs: use credential guards in nfs_local_call_write()
nfs: use credential guards in nfs_local_call_read()
erofs: use credential guards
...
|
|
removals are done with locked_recursive_removal(); switch creations to
simple_start_creating()/d_make_persistent()/simple_done_creating() and
take them to a helper (add_entry()), while we are at it - simpler control
flow that way.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
bm_register_write() opens an executable file using open_exec(), which
internally calls do_open_execat() and denies write access on the file to
avoid modification while it is being executed.
However, when an error occurs, bm_register_write() closes the file using
filp_close() directly. This does not restore the write permission, which
may cause subsequent write operations on the same file to fail.
Fix this by calling exe_file_allow_write_access() before filp_close() to
restore the write permission properly.
Fixes: e7850f4d844e ("binfmt_misc: fix possible deadlock in bm_register_write")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Link: https://patch.msgid.link/20251105022923.1813587-1-zilin@seu.edu.cn
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use credential guards for scoped credential override with automatic
restoration on scope exit.
Link: https://patch.msgid.link/20251103-work-creds-guards-simple-v1-8-a3e156839e7f@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
... fixing a mount leak, strictly speaking.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The lookup_one_len family of functions is (now) only used internally by
a filesystem on itself either
- in a context where permission checking is irrelevant such as by a
virtual filesystem populating itself, or xfs accessing its ORPHANAGE
or dquota accessing the quota file; or
- in a context where a permission check (MAY_EXEC on the parent) has just
been performed such as a network filesystem finding in "silly-rename"
file in the same directory. This is also the context after the
_parentat() functions where currently lookup_one_qstr_excl() is used.
So the permission check is pointless.
The name "one_len" is unhelpful in understanding the purpose of these
functions and should be changed. Most of the callers pass the len as
"strlen()" so using a qstr and QSTR() can simplify the code.
This patch renames these functions (include lookup_positive_unlocked()
which is part of the family despite the name) to have a name based on
"lookup_noperm". They are changed to receive a 'struct qstr' instead
of separate name and len. In a few cases the use of QSTR() results in a
new call to strlen().
try_lookup_noperm() takes a pointer to a qstr instead of the whole
qstr. This is consistent with d_hash_and_lookup() (which is nearly
identical) and useful for lookup_noperm_unlocked().
The new lookup_noperm_common() doesn't take a qstr yet. That will be
tidied up in a subsequent patch.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/r/20250319031545.2999807-5-neil@brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- fix up /proc/pid/comm in the execveat(AT_EMPTY_PATH) case (Tycho
Andersen, Kees Cook)
- binfmt_misc: Fix comment typos (Christophe JAILLET)
- move empty argv[0] warning closer to actual logic (Nir Lichtman)
- remove legacy custom binfmt modules autoloading (Nir Lichtman)
- Make sure set_task_comm() always NUL-terminates
- binfmt_flat: Fix integer overflow bug on 32 bit systems (Dan
Carpenter)
- coredump: Do not lock when copying "comm"
- MAINTAINERS: add auxvec.h and set myself as maintainer
* tag 'execve-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_flat: Fix integer overflow bug on 32 bit systems
selftests/exec: add a test for execveat()'s comm
exec: fix up /proc/pid/comm in the execveat(AT_EMPTY_PATH) case
exec: Make sure task->comm is always NUL-terminated
exec: remove legacy custom binfmt modules autoloading
exec: move warning of null argv to be next to the relevant code
fs: binfmt: Fix a typo
MAINTAINERS: exec: Mark Kees as maintainer
MAINTAINERS: exec: Add auxvec.h UAPI
coredump: Do not lock during 'comm' reporting
|
|
A 't' is missing in "binfm_misc".
Add it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Link: https://lore.kernel.org/r/34b8c52b67934b293a67558a9a486aea7ba08951.1730539498.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
This reverts commit 2a010c41285345da60cece35575b4e0af7e7bf44.
Rui Ueyama <rui314@gmail.com> writes:
> I'm the creator and the maintainer of the mold linker
> (https://github.com/rui314/mold). Recently, we discovered that mold
> started causing process crashes in certain situations due to a change
> in the Linux kernel. Here are the details:
>
> - In general, overwriting an existing file is much faster than
> creating an empty file and writing to it on Linux, so mold attempts to
> reuse an existing executable file if it exists.
>
> - If a program is running, opening the executable file for writing
> previously failed with ETXTBSY. If that happens, mold falls back to
> creating a new file.
>
> - However, the Linux kernel recently changed the behavior so that
> writing to an executable file is now always permitted
> (https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2a010c412853).
>
> That caused mold to write to an executable file even if there's a
> process running that file. Since changes to mmap'ed files are
> immediately visible to other processes, any processes running that
> file would almost certainly crash in a very mysterious way.
> Identifying the cause of these random crashes took us a few days.
>
> Rejecting writes to an executable file that is currently running is a
> well-known behavior, and Linux had operated that way for a very long
> time. So, I don’t believe relying on this behavior was our mistake;
> rather, I see this as a regression in the Linux kernel.
Quoting myself from commit 2a010c412853 ("fs: don't block i_writecount during exec")
> Yes, someone in userspace could potentially be relying on this. It's not
> completely out of the realm of possibility but let's find out if that's
> actually the case and not guess.
It seems we found out that someone is relying on this obscure behavior.
So revert the change.
Link: https://github.com/rui314/mold/issues/1361
Link: https://lore.kernel.org/r/4a2bc207-76be-4715-8e12-7fc45a76a125@leemhuis.info
Cc: <stable@vger.kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs module description updates from Christian Brauner:
"This contains patches to add module descriptions to all modules under
fs/ currently lacking them"
* tag 'vfs-6.11.module.description' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
openpromfs: add missing MODULE_DESCRIPTION() macro
fs: nls: add missing MODULE_DESCRIPTION() macros
fs: autofs: add MODULE_DESCRIPTION()
fs: fat: add missing MODULE_DESCRIPTION() macros
fs: binfmt: add missing MODULE_DESCRIPTION() macros
fs: cramfs: add MODULE_DESCRIPTION()
fs: hfs: add MODULE_DESCRIPTION()
fs: hpfs: add MODULE_DESCRIPTION()
qnx4: add MODULE_DESCRIPTION()
qnx6: add MODULE_DESCRIPTION()
fs: sysv: add MODULE_DESCRIPTION()
fs: efs: add MODULE_DESCRIPTION()
fs: minix: add MODULE_DESCRIPTION()
|
|
Back in 2021 we already discussed removing deny_write_access() for
executables. Back then I was hesistant because I thought that this might
cause issues in userspace. But even back then I had started taking some
notes on what could potentially depend on this and I didn't come up with
a lot so I've changed my mind and I would like to try this.
Here are some of the notes that I took:
(1) The deny_write_access() mechanism is causing really pointless issues
such as [1]. If a thread in a thread-group opens a file writable,
then writes some stuff, then closing the file descriptor and then
calling execve() they can fail the execve() with ETXTBUSY because
another thread in the thread-group could have concurrently called
fork(). Multi-threaded libraries such as go suffer from this.
(2) There are userspace attacks that rely on overwriting the binary of a
running process. These attacks are _mitigated_ but _not at all
prevented_ from ocurring by the deny_write_access() mechanism.
I'll go over some details. The clearest example of such attacks was
the attack against runC in CVE-2019-5736 (cf. [3]).
An attack could compromise the runC host binary from inside a
_privileged_ runC container. The malicious binary could then be used
to take over the host.
(It is crucial to note that this attack is _not_ possible with
unprivileged containers. IOW, the setup here is already insecure.)
The attack can be made when attaching to a running container or when
starting a container running a specially crafted image. For example,
when runC attaches to a container the attacker can trick it into
executing itself.
This could be done by replacing the target binary inside the
container with a custom binary pointing back at the runC binary
itself. As an example, if the target binary was /bin/bash, this
could be replaced with an executable script specifying the
interpreter path #!/proc/self/exe.
As such when /bin/bash is executed inside the container, instead the
target of /proc/self/exe will be executed. That magic link will
point to the runc binary on the host. The attacker can then proceed
to write to the target of /proc/self/exe to try and overwrite the
runC binary on the host.
However, this will not succeed because of deny_write_access(). Now,
one might think that this would prevent the attack but it doesn't.
To overcome this, the attacker has multiple ways:
* Open a file descriptor to /proc/self/exe using the O_PATH flag and
then proceed to reopen the binary as O_WRONLY through
/proc/self/fd/<nr> and try to write to it in a busy loop from a
separate process. Ultimately it will succeed when the runC binary
exits. After this the runC binary is compromised and can be used
to attack other containers or the host itself.
* Use a malicious shared library annotating a function in there with
the constructor attribute making the malicious function run as an
initializor. The malicious library will then open /proc/self/exe
for creating a new entry under /proc/self/fd/<nr>. It'll then call
exec to a) force runC to exit and b) hand the file descriptor off
to a program that then reopens /proc/self/fd/<nr> for writing
(which is now possible because runC has exited) and overwriting
that binary.
To sum up: the deny_write_access() mechanism doesn't prevent such
attacks in insecure setups. It just makes them minimally harder.
That's all.
The only way back then to prevent this is to create a temporary copy
of the calling binary itself when it starts or attaches to
containers. So what I did back then for LXC (and Aleksa for runC)
was to create an anonymous, in-memory file using the memfd_create()
system call and to copy itself into the temporary in-memory file,
which is then sealed to prevent further modifications. This sealed,
in-memory file copy is then executed instead of the original on-disk
binary.
Any compromising write operations from a privileged container to the
host binary will then write to the temporary in-memory binary and
not to the host binary on-disk, preserving the integrity of the host
binary. Also as the temporary, in-memory binary is sealed, writes to
this will also fail.
The point is that deny_write_access() is uselss to prevent these
attacks.
(3) Denying write access to an inode because it's currently used in an
exec path could easily be done on an LSM level. It might need an
additional hook but that should be about it.
(4) The MAP_DENYWRITE flag for mmap() has been deprecated a long time
ago so while we do protect the main executable the bigger portion of
the things you'd think need protecting such as the shared libraries
aren't. IOW, we let anyone happily overwrite shared libraries.
(5) We removed all remaining uses of VM_DENYWRITE in [2]. That means:
(5.1) We removed the legacy uselib() protection for preventing
overwriting of shared libraries. Nobody cared in 3 years.
(5.2) We allow write access to the elf interpreter after exec
completed treating it on a par with shared libraries.
Yes, someone in userspace could potentially be relying on this. It's not
completely out of the realm of possibility but let's find out if that's
actually the case and not guess.
Link: https://github.com/golang/go/issues/22315 [1]
Link: 49624efa65ac ("Merge tag 'denywrite-for-5.15' of git://github.com/davidhildenbrand/linux") [2]
Link: https://unit42.paloaltonetworks.com/breaking-docker-via-runc-explaining-cve-2019-5736 [3]
Link: https://lwn.net/Articles/866493
Link: https://github.com/golang/go/issues/22220
Link: https://github.com/golang/go/blob/5bf8c0cf09ee5c7e5a37ab90afcce154ab716a97/src/cmd/go/internal/work/buildid.go#L724
Link: https://github.com/golang/go/blob/5bf8c0cf09ee5c7e5a37ab90afcce154ab716a97/src/cmd/go/internal/work/exec.go#L1493
Link: https://github.com/golang/go/blob/5bf8c0cf09ee5c7e5a37ab90afcce154ab716a97/src/cmd/go/internal/script/cmds.go#L457
Link: https://github.com/golang/go/blob/5bf8c0cf09ee5c7e5a37ab90afcce154ab716a97/src/cmd/go/internal/test/test.go#L1557
Link: https://github.com/golang/go/blob/5bf8c0cf09ee5c7e5a37ab90afcce154ab716a97/src/os/exec/lp_linux_test.go#L61
Link: https://github.com/buildkite/agent/pull/2736
Link: https://github.com/rust-lang/rust/issues/114554
Link: https://bugs.openjdk.org/browse/JDK-8068370
Link: https://github.com/dotnet/runtime/issues/58964
Link: https://lore.kernel.org/r/20240531-vfs-i_writecount-v1-1-a17bea7ee36b@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Fix the 'make W=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/binfmt_misc.o
WARNING: modpost: missing MODULE_DESCRIPTION() in fs/binfmt_script.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240527-md-fs-binfmt-v1-1-f9dc1745cb67@quicinc.com
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Support non-BSS ELF segments with zero filesz
Eric Biederman and I refactored ELF segment loading to handle the
case where a segment has a smaller filesz than memsz. Traditionally
linkers only did this for .bss and it was always the last segment. As
a result, the kernel only handled this case when it was the last
segment. We've had two recent cases where linkers were trying to use
these kinds of segments for other reasons, and the were in the middle
of the segment list. There was no good reason for the kernel not to
support this, and the refactor actually ends up making things more
readable too.
- Enable namespaced binfmt_misc
Christian Brauner has made it possible to use binfmt_misc with mount
namespaces. This means some traditionally root-only interfaces (for
adding/removing formats) are now more exposed (but believed to be
safe).
- Remove struct tag 'dynamic' from ELF UAPI
Alejandro Colomar noticed that the ELF UAPI has been polluting the
struct namespace with an unused and overly generic tag named
"dynamic" for no discernible reason for many many years. After
double-checking various distro source repositories, it has been
removed.
- Clean up binfmt_elf_fdpic debug output (Greg Ungerer)
* tag 'execve-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_misc: enable sandboxed mounts
binfmt_misc: cleanup on filesystem umount
binfmt_elf_fdpic: clean up debug warnings
mm: Remove unused vm_brk()
binfmt_elf: Only report padzero() errors when PROT_WRITE
binfmt_elf: Use elf_load() for library
binfmt_elf: Use elf_load() for interpreter
binfmt_elf: elf_bss no longer used by load_elf_binary()
binfmt_elf: Support segments with 0 filesz and misaligned starts
elf, uapi: Remove struct tag 'dynamic'
|
|
Convert the core vfs code to use the new timestamp accessor functions.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185239.80830-2-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Enable unprivileged sandboxes to create their own binfmt_misc mounts.
This is based on Laurent's work in [1] but has been significantly
reworked to fix various issues we identified in earlier versions.
While binfmt_misc can currently only be mounted in the initial user
namespace, binary types registered in this binfmt_misc instance are
available to all sandboxes (Either by having them installed in the
sandbox or by registering the binary type with the F flag causing the
interpreter to be opened right away). So binfmt_misc binary types are
already delegated to sandboxes implicitly.
However, while a sandbox has access to all registered binary types in
binfmt_misc a sandbox cannot currently register its own binary types
in binfmt_misc. This has prevented various use-cases some of which were
already outlined in [1] but we have a range of issues associated with
this (cf. [3]-[5] below which are just a small sample).
Extend binfmt_misc to be mountable in non-initial user namespaces.
Similar to other filesystem such as nfsd, mqueue, and sunrpc we use
keyed superblock management. The key determines whether we need to
create a new superblock or can reuse an already existing one. We use the
user namespace of the mount as key. This means a new binfmt_misc
superblock is created once per user namespace creation. Subsequent
mounts of binfmt_misc in the same user namespace will mount the same
binfmt_misc instance. We explicitly do not create a new binfmt_misc
superblock on every binfmt_misc mount as the semantics for
load_misc_binary() line up with the keying model. This also allows us to
retrieve the relevant binfmt_misc instance based on the caller's user
namespace which can be done in a simple (bounded to 32 levels) loop.
Similar to the current binfmt_misc semantics allowing access to the
binary types in the initial binfmt_misc instance we do allow sandboxes
access to their parent's binfmt_misc mounts if they do not have created
a separate binfmt_misc instance.
Overall, this will unblock the use-cases mentioned below and in general
will also allow to support and harden execution of another
architecture's binaries in tight sandboxes. For instance, using the
unshare binary it possible to start a chroot of another architecture and
configure the binfmt_misc interpreter without being root to run the
binaries in this chroot and without requiring the host to modify its
binary type handlers.
Henning had already posted a few experiments in the cover letter at [1].
But here's an additional example where an unprivileged container
registers qemu-user-static binary handlers for various binary types in
its separate binfmt_misc mount and is then seamlessly able to start
containers with a different architecture without affecting the host:
root [lxc monitor] /var/snap/lxd/common/lxd/containers f1
1000000 \_ /sbin/init
1000000 \_ /lib/systemd/systemd-journald
1000000 \_ /lib/systemd/systemd-udevd
1000100 \_ /lib/systemd/systemd-networkd
1000101 \_ /lib/systemd/systemd-resolved
1000000 \_ /usr/sbin/cron -f
1000103 \_ /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
1000000 \_ /usr/bin/python3 /usr/bin/networkd-dispatcher --run-startup-triggers
1000104 \_ /usr/sbin/rsyslogd -n -iNONE
1000000 \_ /lib/systemd/systemd-logind
1000000 \_ /sbin/agetty -o -p -- \u --noclear --keep-baud console 115200,38400,9600 vt220
1000107 \_ dnsmasq --conf-file=/dev/null -u lxc-dnsmasq --strict-order --bind-interfaces --pid-file=/run/lxc/dnsmasq.pid --liste
1000000 \_ [lxc monitor] /var/lib/lxc f1-s390x
1100000 \_ /usr/bin/qemu-s390x-static /sbin/init
1100000 \_ /usr/bin/qemu-s390x-static /lib/systemd/systemd-journald
1100000 \_ /usr/bin/qemu-s390x-static /usr/sbin/cron -f
1100103 \_ /usr/bin/qemu-s390x-static /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-ac
1100000 \_ /usr/bin/qemu-s390x-static /usr/bin/python3 /usr/bin/networkd-dispatcher --run-startup-triggers
1100104 \_ /usr/bin/qemu-s390x-static /usr/sbin/rsyslogd -n -iNONE
1100000 \_ /usr/bin/qemu-s390x-static /lib/systemd/systemd-logind
1100000 \_ /usr/bin/qemu-s390x-static /sbin/agetty -o -p -- \u --noclear --keep-baud console 115200,38400,9600 vt220
1100000 \_ /usr/bin/qemu-s390x-static /sbin/agetty -o -p -- \u --noclear --keep-baud pts/0 115200,38400,9600 vt220
1100000 \_ /usr/bin/qemu-s390x-static /sbin/agetty -o -p -- \u --noclear --keep-baud pts/1 115200,38400,9600 vt220
1100000 \_ /usr/bin/qemu-s390x-static /sbin/agetty -o -p -- \u --noclear --keep-baud pts/2 115200,38400,9600 vt220
1100000 \_ /usr/bin/qemu-s390x-static /sbin/agetty -o -p -- \u --noclear --keep-baud pts/3 115200,38400,9600 vt220
1100000 \_ /usr/bin/qemu-s390x-static /lib/systemd/systemd-udevd
[1]: https://lore.kernel.org/all/20191216091220.465626-1-laurent@vivier.eu
[2]: https://discuss.linuxcontainers.org/t/binfmt-misc-permission-denied
[3]: https://discuss.linuxcontainers.org/t/lxd-binfmt-support-for-qemu-static-interpreters
[4]: https://discuss.linuxcontainers.org/t/3-1-0-binfmt-support-service-in-unprivileged-guest-requires-write-access-on-hosts-proc-sys-fs-binfmt-misc
[5]: https://discuss.linuxcontainers.org/t/qemu-user-static-not-working-4-11
Link: https://lore.kernel.org/r/20191216091220.465626-2-laurent@vivier.eu (origin)
Link: https://lore.kernel.org/r/20211028103114.2849140-2-brauner@kernel.org (v1)
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Jann Horn <jannh@google.com>
Cc: Henning Schild <henning.schild@siemens.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
/* v2 */
- Serge Hallyn <serge@hallyn.com>:
- Use GFP_KERNEL_ACCOUNT for userspace triggered allocations when a
new binary type handler is registered.
- Christian Brauner <christian.brauner@ubuntu.com>:
- Switch authorship to me. I refused to do that earlier even though
Laurent said I should do so because I think it's genuinely bad form.
But by now I have changed so many things that it'd be unfair to
blame Laurent for any potential bugs in here.
- Add more comments that explain what's going on.
- Rename functions while changing them to better reflect what they are
doing to make the code easier to understand.
- In the first version when a specific binary type handler was removed
either through a write to the entry's file or all binary type
handlers were removed by a write to the binfmt_misc mount's status
file all cleanup work happened during inode eviction.
That includes removal of the relevant entries from entry list. While
that works fine I disliked that model after thinking about it for a
bit. Because it means that there was a window were someone has
already removed a or all binary handlers but they could still be
safely reached from load_misc_binary() when it has managed to take
the read_lock() on the entries list while inode eviction was already
happening. Again, that perfectly benign but it's cleaner to remove
the binary handler from the list immediately meaning that ones the
write to then entry's file or the binfmt_misc status file returns
the binary type cannot be executed anymore. That gives stronger
guarantees to the user.
|
|
Currently, registering a new binary type pins the binfmt_misc
filesystem. Specifically, this means that as long as there is at least
one binary type registered the binfmt_misc filesystem survives all
umounts, i.e. the superblock is not destroyed. Meaning that a umount
followed by another mount will end up with the same superblock and the
same binary type handlers. This is a behavior we tend to discourage for
any new filesystems (apart from a few special filesystems such as e.g.
configfs or debugfs). A umount operation without the filesystem being
pinned - by e.g. someone holding a file descriptor to an open file -
should usually result in the destruction of the superblock and all
associated resources. This makes introspection easier and leads to
clearly defined, simple and clean semantics. An administrator can rely
on the fact that a umount will guarantee a clean slate making it
possible to reinitialize a filesystem. Right now all binary types would
need to be explicitly deleted before that can happen.
This allows us to remove the heavy-handed calls to simple_pin_fs() and
simple_release_fs() when creating and deleting binary types. This in
turn allows us to replace the current brittle pinning mechanism abusing
dget() which has caused a range of bugs judging from prior fixes in [2]
and [3]. The additional dget() in load_misc_binary() pins the dentry but
only does so for the sake to prevent ->evict_inode() from freeing the
node when a user removes the binary type and kill_node() is run. Which
would mean ->interpreter and ->interp_file would be freed causing a UAF.
This isn't really nicely documented nor is it very clean because it
relies on simple_pin_fs() pinning the filesystem as long as at least one
binary type exists. Otherwise it would cause load_misc_binary() to hold
on to a dentry belonging to a superblock that has been shutdown.
Replace that implicit pinning with a clean and simple per-node refcount
and get rid of the ugly dget() pinning. A similar mechanism exists for
e.g. binderfs (cf. [4]). All the cleanup work can now be done in
->evict_inode().
In a follow-up patch we will make it possible to use binfmt_misc in
sandboxes. We will use the cleaner semantics where a umount for the
filesystem will cause the superblock and all resources to be
deallocated. In preparation for this apply the same semantics to the
initial binfmt_misc mount. Note, that this is a user-visible change and
as such a uapi change but one that we can reasonably risk. We've
discussed this in earlier versions of this patchset (cf. [1]).
The main user and provider of binfmt_misc is systemd. Systemd provides
binfmt_misc via autofs since it is configurable as a kernel module and
is used by a few exotic packages and users. As such a binfmt_misc mount
is triggered when /proc/sys/fs/binfmt_misc is accessed and is only
provided on demand. Other autofs on demand filesystems include EFI ESP
which systemd umounts if the mountpoint stays idle for a certain amount
of time. This doesn't apply to the binfmt_misc autofs mount which isn't
touched once it is mounted meaning this change can't accidently wipe
binary type handlers without someone having explicitly unmounted
binfmt_misc. After speaking to systemd folks they don't expect this
change to affect them.
In line with our general policy, if we see a regression for systemd or
other users with this change we will switch back to the old behavior for
the initial binfmt_misc mount and have binary types pin the filesystem
again. But while we touch this code let's take the chance and let's
improve on the status quo.
[1]: https://lore.kernel.org/r/20191216091220.465626-2-laurent@vivier.eu
[2]: commit 43a4f2619038 ("exec: binfmt_misc: fix race between load_misc_binary() and kill_node()"
[3]: commit 83f918274e4b ("exec: binfmt_misc: shift filp_close(interp_file) from kill_node() to bm_evict_inode()")
[4]: commit f0fe2c0f050d ("binder: prevent UAF for binderfs devices II")
Link: https://lore.kernel.org/r/20211028103114.2849140-1-brauner@kernel.org (v1)
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Jann Horn <jannh@google.com>
Cc: Henning Schild <henning.schild@siemens.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Laurent Vivier <laurent@vivier.eu>
Cc: linux-fsdevel@vger.kernel.org
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
---
/* v2 */
- Christian Brauner <christian.brauner@ubuntu.com>:
- Add more comments that explain what's going on.
- Rename functions while changing them to better reflect what they are
doing to make the code easier to understand.
- In the first version when a specific binary type handler was removed
either through a write to the entry's file or all binary type
handlers were removed by a write to the binfmt_misc mount's status
file all cleanup work happened during inode eviction.
That includes removal of the relevant entries from entry list. While
that works fine I disliked that model after thinking about it for a
bit. Because it means that there was a window were someone has
already removed a or all binary handlers but they could still be
safely reached from load_misc_binary() when it has managed to take
the read_lock() on the entries list while inode eviction was already
happening. Again, that perfectly benign but it's cleaner to remove
the binary handler from the list immediately meaning that ones the
write to then entry's file or the binfmt_misc status file returns
the binary type cannot be executed anymore. That gives stronger
guarantees to the user.
|
|
In later patches, we're going to change how the inode's ctime field is
used. Switch to using accessor functions instead of raw accesses of
inode->i_ctime.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Message-Id: <20230705190309.579783-23-jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
UBSAN reported a shift-out-of-bounds warning:
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x8d/0xcf lib/dump_stack.c:106
ubsan_epilogue+0xa/0x44 lib/ubsan.c:151
__ubsan_handle_shift_out_of_bounds+0x1e7/0x208 lib/ubsan.c:322
check_special_flags fs/binfmt_misc.c:241 [inline]
create_entry fs/binfmt_misc.c:456 [inline]
bm_register_write+0x9d3/0xa20 fs/binfmt_misc.c:654
vfs_write+0x11e/0x580 fs/read_write.c:582
ksys_write+0xcf/0x120 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x34/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x4194e1
Since the type of Node's flags is unsigned long, we should define these
macros with same type too.
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221102025123.1117184-1-liushixin2@huawei.com
|
|
Commit 3ba442d5331f ("fs: move binfmt_misc sysctl to its own file") did
not go unnoticed, binfmt-support stopped to work on my Debian system
since v5.17-rc2 (did not check with -rc1).
The existance of the /proc/sys/fs/binfmt_misc is a precondition for
attempting to mount the binfmt_misc fs, which in turn triggers the
autoload of the binfmt_misc module. Without it, no module is loaded and
no binfmt is available at boot.
Building as built-in or manually loading the module and mounting the fs
works fine, it's therefore only a matter of interaction with user-space.
I could try to improve the Debian systemd configuration but I can't say
anything about the other distributions.
This patch restores a working system right after boot.
Fixes: 3ba442d5331f ("fs: move binfmt_misc sysctl to its own file")
Signed-off-by: Domenico Andreoli <domenico.andreoli@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We should unregister the table upon module unload otherwise something
horrible will happen when we load binfmt_misc module again. Also note
that we should keep value returned by register_sysctl_mount_point() and
release it later, otherwise it will leak.
Also, per Christian's comment, to fully restore the old behavior that
won't break userspace the check(binfmt_misc_header) should be
eliminated.
To reproduce:
modprobe binfmt_misc
modprobe -r binfmt_misc
modprobe binfmt_misc
modprobe -r binfmt_misc
modprobe binfmt_misc
resulting in
modprobe: can't load module binfmt_misc (kernel/fs/binfmt_misc.ko): Cannot allocate memory
and an unhappy kernel:
binfmt_misc: Failed to create fs/binfmt_misc sysctl mount point
binfmt_misc: Failed to create fs/binfmt_misc sysctl mount point
BUG: unable to handle page fault for address: fffffbfff8004802
Call Trace:
init_misc_binfmt+0x2d/0x1000 [binfmt_misc]
Link: https://lkml.kernel.org/r/20220124181812.1869535-2-ztong0001@gmail.com
Fixes: 3ba442d5331f ("fs: move binfmt_misc sysctl to its own file")
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Co-developed-by: Christian Brauner<brauner@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.
To help with this maintenance let's start by moving sysctls to places
where they actually belong. The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.
This moves the binfmt_misc sysctl to its own file to help remove clutter
from kernel/sysctl.c.
Link: https://lkml.kernel.org/r/20211124231435.1445213-5-mcgrof@kernel.org
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Antti Palosaari <crope@iki.fi>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Benjamin LaHaise <bcrl@kvack.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kees Cook <keescook@chromium.org>
Cc: Lukas Middendorf <kernel@tuxforce.de>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Qing Wang <wangqing@vivo.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a deadlock in bm_register_write:
First, in the begining of the function, a lock is taken on the binfmt_misc
root inode with inode_lock(d_inode(root)).
Then, if the user used the MISC_FMT_OPEN_FILE flag, the function will call
open_exec on the user-provided interpreter.
open_exec will call a path lookup, and if the path lookup process includes
the root of binfmt_misc, it will try to take a shared lock on its inode
again, but it is already locked, and the code will get stuck in a deadlock
To reproduce the bug:
$ echo ":iiiii:E::ii::/proc/sys/fs/binfmt_misc/bla:F" > /proc/sys/fs/binfmt_misc/register
backtrace of where the lock occurs (#5):
0 schedule () at ./arch/x86/include/asm/current.h:15
1 0xffffffff81b51237 in rwsem_down_read_slowpath (sem=0xffff888003b202e0, count=<optimized out>, state=state@entry=2) at kernel/locking/rwsem.c:992
2 0xffffffff81b5150a in __down_read_common (state=2, sem=<optimized out>) at kernel/locking/rwsem.c:1213
3 __down_read (sem=<optimized out>) at kernel/locking/rwsem.c:1222
4 down_read (sem=<optimized out>) at kernel/locking/rwsem.c:1355
5 0xffffffff811ee22a in inode_lock_shared (inode=<optimized out>) at ./include/linux/fs.h:783
6 open_last_lookups (op=0xffffc9000022fe34, file=0xffff888004098600, nd=0xffffc9000022fd10) at fs/namei.c:3177
7 path_openat (nd=nd@entry=0xffffc9000022fd10, op=op@entry=0xffffc9000022fe34, flags=flags@entry=65) at fs/namei.c:3366
8 0xffffffff811efe1c in do_filp_open (dfd=<optimized out>, pathname=pathname@entry=0xffff8880031b9000, op=op@entry=0xffffc9000022fe34) at fs/namei.c:3396
9 0xffffffff811e493f in do_open_execat (fd=fd@entry=-100, name=name@entry=0xffff8880031b9000, flags=<optimized out>, flags@entry=0) at fs/exec.c:913
10 0xffffffff811e4a92 in open_exec (name=<optimized out>) at fs/exec.c:948
11 0xffffffff8124aa84 in bm_register_write (file=<optimized out>, buffer=<optimized out>, count=19, ppos=<optimized out>) at fs/binfmt_misc.c:682
12 0xffffffff811decd2 in vfs_write (file=file@entry=0xffff888004098500, buf=buf@entry=0xa758d0 ":iiiii:E::ii::i:CF
", count=count@entry=19, pos=pos@entry=0xffffc9000022ff10) at fs/read_write.c:603
13 0xffffffff811defda in ksys_write (fd=<optimized out>, buf=0xa758d0 ":iiiii:E::ii::i:CF
", count=19) at fs/read_write.c:658
14 0xffffffff81b49813 in do_syscall_64 (nr=<optimized out>, regs=0xffffc9000022ff58) at arch/x86/entry/common.c:46
15 0xffffffff81c0007c in entry_SYSCALL_64 () at arch/x86/entry/entry_64.S:120
To solve the issue, the open_exec call is moved to before the write
lock is taken by bm_register_write
Link: https://lkml.kernel.org/r/20210228224414.95962-1-liorribak@gmail.com
Fixes: 948b701a607f1 ("binfmt_misc: add persistent opened binary handler for containers")
Signed-off-by: Lior Ribak <liorribak@gmail.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It can be useful to the interpreter to know which flags are in use.
For instance, knowing if the preserve-argv[0] is in use would
allow to skip the pathname argument.
This patch uses an unused auxiliary vector, AT_FLAGS, to add a
flag to inform interpreter if the preserve-argv[0] is enabled.
Note by Helge Deller:
The real-world user of this patch is qemu-user, which needs to know
if it has to preserve the argv[0]. See Debian bug #970460.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: YunQiang Su <ysu@wavecomp.com>
URL: http://bugs.debian.org/970460
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Merge yet more updates from Andrew Morton:
- More MM work. 100ish more to go. Mike Rapoport's "mm: remove
__ARCH_HAS_5LEVEL_HACK" series should fix the current ppc issue
- Various other little subsystems
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (127 commits)
lib/ubsan.c: fix gcc-10 warnings
tools/testing/selftests/vm: remove duplicate headers
selftests: vm: pkeys: fix multilib builds for x86
selftests: vm: pkeys: use the correct page size on powerpc
selftests/vm/pkeys: override access right definitions on powerpc
selftests/vm/pkeys: test correct behaviour of pkey-0
selftests/vm/pkeys: introduce a sub-page allocator
selftests/vm/pkeys: detect write violation on a mapped access-denied-key page
selftests/vm/pkeys: associate key on a mapped page and detect write violation
selftests/vm/pkeys: associate key on a mapped page and detect access violation
selftests/vm/pkeys: improve checks to determine pkey support
selftests/vm/pkeys: fix assertion in test_pkey_alloc_exhaust()
selftests/vm/pkeys: fix number of reserved powerpc pkeys
selftests/vm/pkeys: introduce powerpc support
selftests/vm/pkeys: introduce generic pkey abstractions
selftests: vm: pkeys: use the correct huge page size
selftests/vm/pkeys: fix alloc_random_pkey() to make it really random
selftests/vm/pkeys: fix assertion in pkey_disable_set/clear()
selftests/vm/pkeys: fix pkey_disable_clear()
selftests: vm: pkeys: add helpers for pkey bits
...
|
|
copy_strings_kernel is always used with a single argument,
adjust the calling convention to that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Link: http://lkml.kernel.org/r/20200501104105.2621149-2-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Move the computation of creds from prepare_binfmt into begin_new_exec
so that the creds need only be |
