| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Sinc commit 79a6d1bfe114 ("can: gs_usb: gs_usb_receive_bulk_callback():
unanchor URL on usb_submit_urb() error") a failing resubmit URB will print
an info message.
In the case of a short read where netdev has not yet been assigned,
initialize as NULL to avoid dereferencing an undefined value. Also report
the error value of the failed resubmit.
Fixes: 79a6d1bfe114 ("can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260119181904.1209979-1-kuba@kernel.org/
Link: https://patch.msgid.link/20260120-gs_usb-fix-error-message-v1-1-6be04de572bc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In usb_8dev_open() -> usb_8dev_start(), the URBs for USB-in transfers are
allocated, added to the priv->rx_submitted anchor and submitted. In the
complete callback usb_8dev_read_bulk_callback(), the URBs are processed and
resubmitted. In usb_8dev_close() -> unlink_all_urbs() the URBs are freed by
calling usb_kill_anchored_urbs(&priv->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
usb_8dev_read_bulk_callback() to the priv->rx_submitted anchor.
Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260116-can_usb-fix-memory-leak-v2-5-4b8cb2915571@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In mcba_usb_probe() -> mcba_usb_start(), the URBs for USB-in transfers are
allocated, added to the priv->rx_submitted anchor and submitted. In the
complete callback mcba_usb_read_bulk_callback(), the URBs are processed and
resubmitted. In mcba_usb_close() -> mcba_urb_unlink() the URBs are freed by
calling usb_kill_anchored_urbs(&priv->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
mcba_usb_read_bulk_callback()to the priv->rx_submitted anchor.
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260116-can_usb-fix-memory-leak-v2-4-4b8cb2915571@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In kvaser_usb_set_{,data_}bittiming() -> kvaser_usb_setup_rx_urbs(), the
URBs for USB-in transfers are allocated, added to the dev->rx_submitted
anchor and submitted. In the complete callback
kvaser_usb_read_bulk_callback(), the URBs are processed and resubmitted. In
kvaser_usb_remove_interfaces() the URBs are freed by calling
usb_kill_anchored_urbs(&dev->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in usb_kill_anchored_urbs().
Fix the memory leak by anchoring the URB in the
kvaser_usb_read_bulk_callback() to the dev->rx_submitted anchor.
Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260116-can_usb-fix-memory-leak-v2-3-4b8cb2915571@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In esd_usb_open(), the URBs for USB-in transfers are allocated, added to
the dev->rx_submitted anchor and submitted. In the complete callback
esd_usb_read_bulk_callback(), the URBs are processed and resubmitted. In
esd_usb_close() the URBs are freed by calling
usb_kill_anchored_urbs(&dev->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in esd_usb_close().
Fix the memory leak by anchoring the URB in the
esd_usb_read_bulk_callback() to the dev->rx_submitted anchor.
Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260116-can_usb-fix-memory-leak-v2-2-4b8cb2915571@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Fix similar memory leak as in commit 7352e1d5932a ("can: gs_usb:
gs_usb_receive_bulk_callback(): fix URB memory leak").
In ems_usb_open(), the URBs for USB-in transfers are allocated, added to
the dev->rx_submitted anchor and submitted. In the complete callback
ems_usb_read_bulk_callback(), the URBs are processed and resubmitted. In
ems_usb_close() the URBs are freed by calling
usb_kill_anchored_urbs(&dev->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in ems_usb_close().
Fix the memory leak by anchoring the URB in the
ems_usb_read_bulk_callback() to the dev->rx_submitted anchor.
Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260116-can_usb-fix-memory-leak-v2-1-4b8cb2915571@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
usb_submit_urb() error
In commit 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix
URB memory leak"), the URB was re-anchored before usb_submit_urb() in
gs_usb_receive_bulk_callback() to prevent a leak of this URB during
cleanup.
However, this patch did not take into account that usb_submit_urb() could
fail. The URB remains anchored and
usb_kill_anchored_urbs(&parent->rx_submitted) in gs_can_close() loops
infinitely since the anchor list never becomes empty.
To fix the bug, unanchor the URB when an usb_submit_urb() error occurs,
also print an info message.
Fixes: 7352e1d5932a ("can: gs_usb: gs_usb_receive_bulk_callback(): fix URB memory leak")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260110223836.3890248-1-kuba@kernel.org/
Link: https://patch.msgid.link/20260116-can_usb-fix-reanchor-v1-1-9d74e7289225@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In gs_can_open(), the URBs for USB-in transfers are allocated, added to the
parent->rx_submitted anchor and submitted. In the complete callback
gs_usb_receive_bulk_callback(), the URB is processed and resubmitted. In
gs_can_close() the URBs are freed by calling
usb_kill_anchored_urbs(parent->rx_submitted).
However, this does not take into account that the USB framework unanchors
the URB before the complete function is called. This means that once an
in-URB has been completed, it is no longer anchored and is ultimately not
released in gs_can_close().
Fix the memory leak by anchoring the URB in the
gs_usb_receive_bulk_callback() to the parent->rx_submitted anchor.
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260105-gs_usb-fix-memory-leak-v2-1-cc6ed6438034@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
When es58x_alloc_rx_urbs() fails to allocate the requested number of
URBs but succeeds in allocating some, it returns an error code.
This causes es58x_open() to return early, skipping the cleanup label
'free_urbs', which leads to the anchored URBs being leaked.
As pointed out by maintainer Vincent Mailhol, the driver is designed
to handle partial URB allocation gracefully. Therefore, partial
allocation should not be treated as a fatal error.
Modify es58x_alloc_rx_urbs() to return 0 if at least one URB has been
allocated, restoring the intended behavior and preventing the leak
in es58x_open().
Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Reported-by: syzbot+e8cb6691a7cf68256cb8@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e8cb6691a7cf68256cb8
Signed-off-by: Szymon Wilczek <swilczek.lx@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251223011732.39361-1-swilczek.lx@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Commit 2603be9e8167 ("can: gs_usb: gs_can_open(): improve error handling")
added missing error handling to the gs_can_open() function.
The driver uses 2 USB anchors to track the allocated URBs: the TX URBs in
struct gs_can::tx_submitted for each netdev and the RX URBs in struct
gs_usb::rx_submitted for the USB device. gs_can_open() allocates the RX
URBs, while TX URBs are allocated during gs_can_start_xmit().
The cleanup in gs_can_open() kills all anchored dev->tx_submitted
URBs (which is not necessary since the netdev is not yet registered), but
misses the parent->rx_submitted URBs.
Fix the problem by killing the rx_submitted instead of the tx_submitted.
Fixes: 2603be9e8167 ("can: gs_usb: gs_can_open(): improve error handling")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251210-gs_usb-fix-error-handling-v1-1-d6a5a03f10bb@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Conflicts:
net/xdp/xsk.c
0ebc27a4c67d ("xsk: avoid data corruption on cq descriptor number")
8da7bea7db69 ("xsk: add indirect call for xsk_destruct_skb")
30ed05adca4a ("xsk: use a smaller new lock for shared pool case")
https://lore.kernel.org/20251127105450.4a1665ec@canb.auug.org.au
https://lore.kernel.org/eb4eee14-7e24-4d1b-b312-e9ea738fefee@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
accessing data
The URB received in gs_usb_receive_bulk_callback() contains a struct
gs_host_frame. The length of the data after the header depends on the
gs_host_frame hf::flags and the active device features (e.g. time
stamping).
Introduce a new function gs_usb_get_minimum_length() and check that we have
at least received the required amount of data before accessing it. Only
copy the data to that skb that has actually been received.
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://patch.msgid.link/20251114-gs_usb-fix-usb-callbacks-v1-3-a29b42eacada@pengutronix.de
[mkl: rename gs_usb_get_minimum_length() -> +gs_usb_get_minimum_rx_length()]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
accessing header
The driver expects to receive a struct gs_host_frame in
gs_usb_receive_bulk_callback().
Use struct_group to describe the header of the struct gs_host_frame and
check that we have at least received the header before accessing any
members of it.
To resubmit the URB, do not dereference the pointer chain
"dev->parent->hf_size_rx" but use "parent->hf_size_rx" instead. Since
"urb->context" contains "parent", it is always defined, while "dev" is not
defined if the URB it too short.
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://patch.msgid.link/20251114-gs_usb-fix-usb-callbacks-v1-2-a29b42eacada@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The driver lacks the cleanup of failed transfers of URBs. This reduces the
number of available URBs per error by 1. This leads to reduced performance
and ultimately to a complete stop of the transmission.
If the sending of a bulk URB fails do proper cleanup:
- increase netdev stats
- mark the echo_sbk as free
- free the driver's context and do accounting
- wake the send queue
Closes: https://github.com/candle-usb/candleLight_fw/issues/187
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://patch.msgid.link/20251114-gs_usb-fix-usb-callbacks-v1-1-a29b42eacada@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The `kvaser_usb_leaf_wait_cmd()` and `kvaser_usb_leaf_read_bulk_callback`
functions contain logic to zero-length commands. These commands are used
to align data to the USB endpoint's wMaxPacketSize boundary.
The driver attempts to skip these placeholders by aligning the buffer
position `pos` to the next packet boundary using `round_up()` function.
However, if zero-length command is found exactly on a packet boundary
(i.e., `pos` is a multiple of wMaxPacketSize, including 0), `round_up`
function will return the unchanged value of `pos`. This prevents `pos`
to be increased, causing an infinite loop in the parsing logic.
This patch fixes this in the function by using `pos + 1` instead.
This ensures that even if `pos` is on a boundary, the calculation is
based on `pos + 1`, forcing `round_up()` to always return the next
aligned boundary.
Fixes: 7259124eac7d ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c")
Signed-off-by: Seungjin Bae <eeodqql09@gmail.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20251023162709.348240-1-eeodqql09@gmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Convert driver to use ndo_hwtstamp_set()/ndo_hwtstamp_get() callbacks.
ndo_eth_ioctl handler does nothing after conversion - remove it.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251029231620.1135640-4-vadim.fedorenko@linux.dev
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Can has generic implementation of ndo_eth_ioctl which implements only HW
timestamping commands. Implement generic ndo_hwtstamp callbacks and use
it in drivers instead of generic ioctl interface.
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251029231620.1135640-2-vadim.fedorenko@linux.dev
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
can_change_mtu() became obsolete by commit 23049938605b ("can: populate the
minimum and maximum MTU values"). Now that net_device->min_mtu and
net_device->max_mtu are populated, all the checks are already done by
dev_validate_mtu() in net/core/dev.c.
Remove the net_device_ops->ndo_change_mtu() callback of all the physical
interfaces, then remove can_change_mtu(). Only keep the vcan_change_mtu()
and vxcan_change_mtu() because the virtual interfaces use their own
different MTU logic.
The only functional change this patch introduces is that now the user will
be able to change the MTU even if the interface is up. This does not matter
for Classical CAN and CAN FD because their MTU range is composed of only
one value, respectively CAN_MTU and CANFD_MTU. For the upcoming CAN XL, the
MTU will be configurable within the CANXL_MIN_MTU to CANXL_MAX_MTU range at
any time, even if the interface is up. This is consistent with the other
net protocols and does not contradict ISO 11898-1:2024 as having a
modifiable MTU is a kernel extension.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251003-remove-can_change_mtu-v1-1-337f8bc21181@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The gs_usb driver supports USB devices with more than 1 CAN channel.
In old kernel before 3.15, it uses net_device->dev_id to distinguish
different channel in userspace, which was done in commit
acff76fa45b4 ("can: gs_usb: gs_make_candev(): set netdev->dev_id").
But since 3.15, the correct way is populating net_device->dev_port.
And according to documentation, if network device support multiple
interface, lack of net_device->dev_port SHALL be treated as a bug.
Fixes: acff76fa45b4 ("can: gs_usb: gs_make_candev(): set netdev->dev_id")
Cc: stable@vger.kernel.org
Signed-off-by: Celeste Liu <uwu@coelacanthus.name>
Link: https://patch.msgid.link/20250930-gs-usb-populate-net_device-dev_port-v1-1-68a065de6937@coelacanthus.name
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This issue was found by Runcheng Lu when develop HSCanT USB to CAN FD
converter[1]. The original developers may have only 3 interfaces
device to test so they write 3 here and wait for future change.
During the HSCanT development, we actually used 4 interfaces, so the
limitation of 3 is not enough now. But just increase one is not
future-proofed. Since the channel index type in gs_host_frame is u8,
just make canch[] become a flexible array with a u8 index, so it
naturally constraint by U8_MAX and avoid statically allocate 256
pointer for every gs_usb device.
[1]: https://github.com/cherry-embedded/HSCanT-hardware
Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Reported-by: Runcheng Lu <runcheng.lu@hpmicro.com>
Cc: stable@vger.kernel.org
Reviewed-by: Vincent Mailhol <mailhol@kernel.org>
Signed-off-by: Celeste Liu <uwu@coelacanthus.name>
Link: https://patch.msgid.link/20250930-gs-usb-max-if-v5-1-863330bf6666@coelacanthus.name
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There are two new drivers and support for more models in existing
ones.
The generic GPIO API has been reworked and all users converted
which allowed us to move the fields specific to the generic GPIO
implementation out of the high-level struct gpio_chip into its own
structure that wraps the gpio_chip.
Other than that, there's nothing too exciting. Mostly minor tweaks and
fixes all over the place, some refactoring and some small new features
in helper modules.
GPIO core:
- add support for sparse pin ranges to the glue between GPIO and
pinctrl
- use a common prefix across all GPIO descriptor flags for improved
namespacing
New drivers:
- add new GPIO driver for the Nuvoton NCT6694
- add new GPIO driver for MAX7360
Driver improvements:
- add support for Tegra 256 to the gpio-tegra186 driver
- add support for Loongson-2K0300 to the gpio-loongson-64bit driver
- refactor the gpio-aggregator module to expose its GPIO forwarder
API to other in-kernel users (to enable merging of a new pinctrl
driver that uses it)
- convert all remaining drivers to using the modernized generic GPIO
chip API and remove the old interface
- stop displaying global GPIO numbers in debugfs output of controller
drivers
- extend the gpio-regmap helper with a new config option and improve
its support for GPIO interrupts
- remove redundant fast_io parameter from regmap configs in GPIO
drivers that already use MMIO regmaps which imply it
- add support for a new model in gpio-mmio: ixp4xx expansion bus
- order includes alphabetically in a few drivers for better
readability
- use generic device properties where applicable
- use devm_mutex_init() where applicable
- extend build coverage of drivers by enabling more to be compiled
with COMPILE_TEST enabled
- allow building gpio-stmpe as a module
- use dev_err_probe() where it makes sense in drivers
Late driver fixes:
- fix setting GPIO direction to output in gpio-mpfs
Documentation:
- document the usage of software nodes with GPIO chips
Device-tree bindings:
- Add DT bindings documents for new hardware: Tegra256, MAX7360
- Document a new model in Loongson bindings: LS2K0300
- Document a new model using the generic GPIO binding: IXP4xx
- Convert the DT binding for fsl,mxs-pinctrl to YAML
- fix the schema ID in the "trivial" GPIO schema
- describe GPIO hogs in the generic GPIO binding"
* tag 'gpio-updates-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (122 commits)
gpio: mpfs: fix setting gpio direction to output
gpio: generic: move GPIO_GENERIC_ flags to the correct header
gpio: generic: rename BGPIOF_ flags to GPIO_GENERIC_
gpio: nomadik: fix the debugfs helper stub
MAINTAINERS: Add entry on MAX7360 driver
input: misc: Add support for MAX7360 rotary
input: keyboard: Add support for MAX7360 keypad
gpio: max7360: Add MAX7360 gpio support
gpio: regmap: Allow to provide init_valid_mask callback
gpio: regmap: Allow to allocate regmap-irq device
pwm: max7360: Add MAX7360 PWM support
pinctrl: Add MAX7360 pinctrl driver
mfd: Add max7360 support
dt-bindings: mfd: gpio: Add MAX7360
rtc: Add Nuvoton NCT6694 RTC support
hwmon: Add Nuvoton NCT6694 HWMON support
watchdog: Add Nuvoton NCT6694 WDT support
can: Add Nuvoton NCT6694 CANFD support
i2c: Add Nuvoton NCT6694 I2C support
gpio: Add Nuvoton NCT6694 GPIO support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-09-25
this is a pull request of 48 patches for net-next/main, which
supersedes tags/linux-can-next-for-6.18-20250923.
The 1st patch is by Xichao Zhao and converts ns_to_ktime() to
us_to_ktime() in the m_can driver.
Vincent Mailhol contributes 2 patches: Updating the MAINTAINERS and
mailmap files to Vincent's new email address and sorting the includes
in the CAN helper library alphabeticaly.
Stéphane Grosjean's patch modifies all peak CAN drivers and the
mailmap to reflect Stéphane's new email address.
4 patches by Biju Das update the CAN-FD handling in the rcar_canfd
driver.
Followed by 11 patches by Geert Uytterhoeven updating and improving
the rcar_can driver.
Stefan Mätje contributes 2 patches for the esd_usb driver updating the
error messages.
The next 3 patch series are all by Vincent Mailhol: 3 patches to
optimize the size of struct raw_sock and struct uniqframe. 4 patches
which rework the CAN MTU logic as preparation for CAN-XL interfaces.
And finally 20 patches that prepare and refactor the CAN netlink code
for the upcoming CAN-XL support.
* tag 'linux-can-next-for-6.18-20250924' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (48 commits)
can: netlink: add userland error messages
can: dev: add can_get_ctrlmode_str()
can: calc_bittiming: make can_calc_tdco() FD agnostic
can: netlink: make can_tdc_fill_info() FD agnostic
can: netlink: add can_bitrate_const_fill_info()
can: netlink: add can_bittiming_const_fill_info()
can: netlink: add can_bittiming_fill_info()
can: netlink: add can_data_bittiming_get_size()
can: netlink: make can_tdc_get_size() FD agnostic
can: netlink: add can_ctrlmode_changelink()
can: netlink: add can_dtb_changelink()
can: netlink: make can_tdc_changelink() FD agnostic
can: netlink: remove useless check in can_tdc_changelink()
can: netlink: refactor CAN_CTRLMODE_TDC_{AUTO,MANUAL} flag reset logic
can: netlink: add can_validate_databittiming()
can: netlink: add can_validate_tdc()
can: netlink: refactor can_validate_bittiming()
can: netlink: document which symbols are FD specific
can: dev: make can_get_relative_tdco() FD agnostic and move it to bittiming.h
can: dev: move struct data_bittiming_params to linux/can/bittiming.h
...
====================
Link: https://patch.msgid.link/20250925121332.848157-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The USB stack calls during disconnect the esd_usb_disconnect() callback.
esd_usb_disconnect() calls netdev_unregister() for each network which
in turn calls the net_device_ops::ndo_stop callback esd_usb_close() if
the net device is up.
The esd_usb_close() callback tries to disable all CAN Ids and to reset
the CAN controller of the device sending appropriate control messages.
Sending these messages in .disconnect() is moot and always fails because
either the device is gone or the USB communication is already torn down
by the USB stack in the course of a rmmod operation.
Move the code that sends these control messages to a new function
esd_usb_stop() which is approximately the counterpart of
esd_usb_start() to make code structure less convoluted.
Then change esd_usb_close() not to send the control messages at all if
the ndo_stop() callback is executed from the USB .disconnect()
callback. Add a new flag in_usb_disconnect to the struct esd_usb
device structure to mark this condition which is checked by
esd_usb_close() whether to skip the send operations in esd_usb_start().
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://patch.msgid.link/20250821143422.3567029-6-stefan.maetje@esd.eu
[mkl: minor change patch description to imperative language]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
- esd_usb_open(): Get rid of duplicate "couldn't start device: %d\n"
message already printed from esd_usb_start().
- Fix duplicate printout of network device name when network device
is registered. Add an unregister message for the network device
as counterpart to the register message.
- Add the printout of error codes together with the error messages
in esd_usb_close() and some in esd_usb_probe(). The additional error
codes should lead to a better understanding what is really going
wrong.
- Convert all occurrences of error status prints to use "ERR_PTR(err)"
instead of printing the decimal value of "err".
- Rename retval to err in esd_usb_read_bulk_callback() to make the
naming of error status variables consistent with all other functions.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://patch.msgid.link/20250821143422.3567029-5-stefan.maetje@esd.eu
[mkl: minor change patch description to imperative language]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Explicitly uses a 64-bit constant when the number of bits used for its
shifting is 32 (which is the case for PC CAN FD interfaces supported by
this driver).
Signed-off-by: Stéphane Grosjean <stephane.grosjean@hms-networks.com>
Link: https://patch.msgid.link/20250918132413.30071-1-stephane.grosjean@free.fr
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/20250917-aboriginal-refined-honeybee-82b1aa-mkl@pengutronix.de
Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
[mkl: update subject, apply manually]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the mcba_usb driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL))
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, mcba_usb_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN frame.
This can result in a buffer overflow. The driver will consume cf->len
as-is with no further checks on these lines:
usb_msg.dlc = cf->len;
memcpy(usb_msg.data, cf->data, usb_msg.dlc);
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU. By
fixing the root cause, this prevents the buffer overflow.
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-4-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Sending an PF_PACKET allows to bypass the CAN framework logic and to
directly reach the xmit() function of a CAN driver. The only check
which is performed by the PF_PACKET framework is to make sure that
skb->len fits the interface's MTU.
Unfortunately, because the etas_es58x driver does not populate its
net_device_ops->ndo_change_mtu(), it is possible for an attacker to
configure an invalid MTU by doing, for example:
$ ip link set can0 mtu 9999
After doing so, the attacker could open a PF_PACKET socket using the
ETH_P_CANXL protocol:
socket(PF_PACKET, SOCK_RAW, htons(ETH_P_CANXL));
to inject a malicious CAN XL frames. For example:
struct canxl_frame frame = {
.flags = 0xff,
.len = 2048,
};
The CAN drivers' xmit() function are calling can_dev_dropped_skb() to
check that the skb is valid, unfortunately under above conditions, the
malicious packet is able to go through can_dev_dropped_skb() checks:
1. the skb->protocol is set to ETH_P_CANXL which is valid (the
function does not check the actual device capabilities).
2. the length is a valid CAN XL length.
And so, es58x_start_xmit() receives a CAN XL frame which it is not
able to correctly handle and will thus misinterpret it as a CAN(FD)
frame.
This can result in a buffer overflow. For example, using the es581.4
variant, the frame will be dispatched to es581_4_tx_can_msg(), go
through the last check at the beginning of this function:
if (can_is_canfd_skb(skb))
return -EMSGSIZE;
and reach this line:
memcpy(tx_can_msg->data, cf->data, cf->len);
Here, cf->len corresponds to the flags field of the CAN XL frame. In
our previous example, we set canxl_frame->flags to 0xff. Because the
maximum expected length is 8, a buffer overflow of 247 bytes occurs!
Populate net_device_ops->ndo_change_mtu() to ensure that the
interface's MTU can not be set to anything bigger than CAN_MTU or
CANFD_MTU (depending on the device capabilities). By fixing the root
cause, this prevents the buffer overflow.
Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20250918-can-fix-mtu-v1-1-0d1cada9393b@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This driver supports Socket CANFD functionality for NCT6694 MFD
device based on USB interface.
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-5-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
With the upcoming deletion of @peak-system.com accounts and following
the acquisition of PEAK-System and its brand by HMS-Networks, this fix
aims to migrate all address references to @hms-networks.com, as well
as to map my personal committer addresses to author addresses, while
taking the opportunity to correct the accent on the first ‘e’ of my
first name.
Signed-off-by: Stéphane Grosjean <stephane.grosjean@hms-networks.com>
Link: https://patch.msgid.link/20250912081820.86314-1-stephane.grosjean@free.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support |
