| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add new hardware support (i.MX93 TMU, Amlogic T7, Intel Arrow
Lake, QCom Nord, Shikra and Hawi), fix issues in a number of places in
the thermal control core and drivers, clean up code and refactor it in
preparation for future changes:
- Rework the initialization and cleanup of thermal class cooling
devices to separate DT-based cooling device registration and
cooling device registration without DT (Daniel Lezcano, Ovidiu
Panait)
- Update the cooling device DT bindings to support 3-cell cooling
device representation, where the additional cell holds an ID to
select a cooling mechanism for devices that offer multiple cooling
mechanisms, and adjust the cooling device registration code
accordingly (Gaurav Kohli, Daniel Lezcano)
- Remove dead code from two functions in the thermal core and
simplify the unregistration of thermal governors (Rafael Wysocki)
- Fix critical temperature attribute removal handling in the generic
thermal zone hwmon support code and rework that code to register a
separate hwmon class device for each thermal zone (instead of using
one hwmon class device for all thermal zones of the same type) to
address thermal zone removal deadlocks (Rafael Wysocki)
- Use attribute groups for adding temperature attributes to hwmon
class devices associated with thermal zones (Rafael Wysocki)
- Pass WQ_UNBOUND when allocating the thermal workqueue (Marco
Crivellari)
- Fix potential shift overflow in ptc_mmio_write() and improve error
handling in proc_thermal_ptc_add() in the int340x thermal control
driver (Aravind Anilraj)
- Use sysfs_emit() for cpumask printing in the Intel powerclamp
thermal driver (Yury Norov)
- Add Arrow Lake CPU models to the intel_tcc_cooling driver (Srinivas
Pandruvada)
- Add QCom Nord, Shikra and Hawi temperature sensor DT bindings
(Deepti Jaggi, Gaurav Kohli, Dipa Ramesh Mantre)
- Use devm_add_action_or_reset() for clock disable on the NVidia
soctherm and switch it to devm cooling device registration version
(Daniel Lezcano)
- Add the Amlogic T7 thermal sensor along with thermal calibration
data read from SMC calls (Ronald Claveau)
- Fix atomic temperature read in the QCom tsens driver to comply with
hardware documentation (Priyansh Jain)
- Add SpacemiT K1 thermal sensor support (Shuwei Wu)
- Add i.MX93 temperature sensor support and filter out the invalid
temperature (Jacky Bai)
- Enable by default the TMU (Thermal Monitoring Unit) on Exynos
platform (Krzysztof Kozlowski)
- Rework interrupt initialization in the Tsens driver and add the
optional wakeup source (Priyansh Jain)
- Fix typo in a comment in the TSens QCom driver (Jinseok Kim)
- Fix trailing whitespace and repeated word in the OF code, remove
quoted string splitting across lines from the iMX7 driver, and
remove a stray space from the thermal_trip_of_attr() macro
definition (Mayur Kumar)
- Update the thermal testing facility code to avoid NULL pointer
dereferences by rejecting missing command arguments and replace
sscanf() with kstrtoint() or kstrtoul() in that code (Ovidiu
Panait, Samuel Moelius)"
* tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
thermal: sysfs: Replace sscanf() with kstrtoul()
thermal: testing: Replace sscanf() with kstrtoint()
thermal: testing: reject missing command arguments
thermal: intel: intel_tcc_cooling: Add Arrow Lake CPU models
thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
thermal/core: Fix missing stub for devm_thermal_cooling_device_register
dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
thermal/of: Support cooling device ID in cooling-spec
thermal/of: Pass cdev_id and introduce devm registration helper
thermal/of: Add cooling device ID support
thermal/of: Rename the devm_thermal_of_cooling_device_register() function
thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
thermal/of: Move cooling device OF helpers out of thermal core
hwmon: Use non-OF thermal cooling device registration API
thermal/core: Add devm_thermal_cooling_device_register()
thermal/core: Introduce non-OF thermal_cooling_device_register()
thermal/drivers/samsung: Enable TMU by default
thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
thermal/drivers/qoriq: Add i.MX93 tmu support
...
|
|
To clarify that the function operates on child nodes, rename:
devm_thermal_of_cooling_device_register()
|
v
devm_thermal_of_child_cooling_device_register()
Used the command:
find . -type f -name '*.[ch]' -exec \
sed -i 's/devm_thermal_of_cooling_device_register/\
devm_thermal_of_child_cooling_device_register/g' {} \;
Did not used clang-format-diff because it does not indent correctly
and checkpatch complained. Manually reindented to make checkpatch
happy
This prepares for upcoming support of cooling devices identified by
an ID rather than device tree child nodes.
No functional change.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260526140802.1059293-18-daniel.lezcano@oss.qualcomm.com
|
|
After removing of_platform_default_populate() calls the atmel-ebi driver
was affected by deferred probing. platform_driver_probe() is
incompatible with deferred probing. This led to atmel-ebi driver
eventually not being probed on at91 sam9x60-curiosity and other sam9x60
based boards. Subsequently the nand-controller driver (nand-controller
being a child node of ebi) on that platform was not probed and thus raw
NAND flash was inaccessible, preventing devices to boot with rootfs on
raw NAND flash (e.g. with UBI/UBIFS).
Fixes: 0b0f7e6539a7 ("ARM: at91: remove unnecessary of_platform_default_populate calls")
Cc: stable@vger.kernel.org
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Link: https://patch.msgid.link/20260429125930.844790-1-ada@thorsis.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- added support for batched cache sync, what improves performance of
dma_map/unmap_sg() operations on ARM64 architecture (Barry Song)
- introduced DMA_ATTR_CC_SHARED attribute for explicitly shared memory
used in confidential computing (Jiri Pirko)
- refactored spaghetti-like code in drivers/of/of_reserved_mem.c and
its clients (Marek Szyprowski, shared branch with device-tree updates
to avoid merge conflicts)
- prepared Contiguous Memory Allocator related code for making dma-buf
drivers modularized (Maxime Ripard)
- added support for benchmarking dma_map_sg() calls to tools/dma
utility (Qinxin Xia)
* tag 'dma-mapping-7.1-2026-04-16' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux: (24 commits)
dma-buf: heaps: system: document system_cc_shared heap
dma-buf: heaps: system: add system_cc_shared heap for explicitly shared memory
dma-mapping: introduce DMA_ATTR_CC_SHARED for shared memory
mm: cma: Export cma_alloc(), cma_release() and cma_get_name()
dma: contiguous: Export dev_get_cma_area()
dma: contiguous: Make dma_contiguous_default_area static
dma: contiguous: Make dev_get_cma_area() a proper function
dma: contiguous: Turn heap registration logic around
of: reserved_mem: rework fdt_init_reserved_mem_node()
of: reserved_mem: clarify fdt_scan_reserved_mem*() functions
of: reserved_mem: rearrange code a bit
of: reserved_mem: replace CMA quirks by generic methods
of: reserved_mem: switch to ops based OF_DECLARE()
of: reserved_mem: use -ENODEV instead of -ENOENT
of: reserved_mem: remove fdt node from the structure
dma-mapping: fix false kernel-doc comment marker
dma-mapping: Support batch mode for dma_direct_{map,unmap}_sg
dma-mapping: Separate DMA sync issuing and completion waiting
arm64: Provide dcache_inval_poc_nosync helper
arm64: Provide dcache_clean_poc_nosync helper
...
|
|
Move init function from OF_DECLARE() argument to the given reserved
memory region ops structure and then pass that structure to the
OF_DECLARE() initializer. This node_init callback is mandatory for the
reserved mem driver. Such change makes it possible in the future to add
more functions called by the generic code before given memory region is
initialized and rmem object is created.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260325090023.3175348-4-m.szyprowski@samsung.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
FDT node is not needed for anything besides the initialization, so it can
be simply passed as an argument to the reserved memory region init
function.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260325090023.3175348-2-m.szyprowski@samsung.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
In Tegra264, different components from memory subsystems like Memory
Controller Fabric (MCF), HUB, HUB Common (HUBC), Side Band Shim (SBS)
and channels have different interrupt lines for receiving memory
controller error interrupts.
Add support for logging memory controller errors reported by these
memory subsystems on Tegra264 by:
- Renaming tegra_mc_error_names array to tegra20_mc_error_names
because it has a different bit index for error names compared to
Tegra264.
- Defining the intmask registers and mask values supported for
Tegra264.
- Registering interrupt handlers for interrupts associated with these
different MC components which read the interrupt status registers to
determine the type of violation that occurred.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-7-ketanp@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add a new structure for the intmask register e.g. MC_INTMASK_0 and
it's mask value. Add an array of these new structures to prepare for
supporting multiple intmask registers. This is done in preparation for
adding support for Tegra264 which supports multiple intmask registers.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-6-ketanp@nvidia.com
[krzk: Fix checkpatch warning]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Introduce new SoC specific fields in tegra_mc_soc struct for high
address mask and error status type mask because Tegra264 has different
values for these than the existing devices. Error status registers
e.g. MC_ERR_STATUS_0 has few bits which indicate the type of the
error. In order to obtain such type of error from error status
register, we use error status type mask. Similarly, these error status
registers have bits which indicate the higher address bits of the
address responsible for mc error. In order to obtain such higher
address, we use high address mask. Make this change to prepare for
adding MC interrupt support for Tegra264.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-5-ketanp@nvidia.com
[krzk: Fix checkpatch warning]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Add support to handle multiple MC interrupts lines, as supported by
Tegra264. Turn the single IRQ handler callback into a counted array to
allow specifying a separate handler for each interrupt. Move IRQ
handlers into tegra_mc_soc struct, so as to specify SoC specific
values.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-4-ketanp@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The current register definitions are not in sorted order. Sort these
registers according to their address. Put bit fields and masks of the
corresponding registers below the register definitions to clearly
identify which fields belongs to which registers.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-3-ketanp@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Group MC error related registers into a struct as they could have SoC
specific values. Tegra264 has different register offsets than the
existing devices and so in order to add support for Tegra264 we need to
first make this change.
Signed-off-by: Ketan Patil <ketanp@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260226163115.1152181-2-ketanp@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Make code printing pointer error value a bit simpler and fix coccinelle
suggestion:
tegra/mc.c:975:4-11: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260226-memory-simplify-v1-4-ccb94f378628@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Use dev_err_probe() to simplify the code and fix Coccinelle warning:
tegra/mc.c:513:52-59: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260226-memory-simplify-v1-3-ccb94f378628@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
tegra_mc_setup_latency_allowance() only succeeds, thus its return value
can be dropped making code a bit simpler.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260226-memory-simplify-v1-2-ccb94f378628@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Use dev_err_probe() to simplify the code and fix Coccinelle warning:
renesas-rpc-if.c:1010:3-10: WARNING: Consider using %pe to print PTR_ERR()
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260226-memory-simplify-v1-1-ccb94f378628@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The same limitations that apply to LPDDR4 also apply to LPDDR5. Expand
the check and rename accordingly.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260122003501.1191059-1-florian.fainelli@broadcom.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
As noticed in the discussion [1] the Baikal SoC and platforms
are not going to be finalized, hence remove stale code.
Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1]
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260225173930.3819351-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The code checking whether the specified memory timing enables DLL
in the EMRS register was reversed. DLL is enabled if bit A0 is low.
Fix the check.
Fixes: e34212c75a68 ("memory: tegra: Introduce Tegra30 EMC driver")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://patch.msgid.link/20260126-fix-emc-dllchange-v1-2-47ad3bb63262@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The code checking whether the specified memory timing enables DLL
in the EMRS register was reversed. DLL is enabled if bit A0 is low.
Fix the check.
Fixes: 73a7f0a90641 ("memory: tegra: Add EMC (external memory controller) driver")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://patch.msgid.link/20260126-fix-emc-dllchange-v1-1-47ad3bb63262@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
The DBB clock is needed by many IP blocks in order to access system
memory via the data backbone. The memory controller and external memory
controllers are the central place where these accesses are managed, so
make sure that the clock can be controlled from the corresponding
driver.
Note that not all drivers fully register bandwidth requests, and hence
the EMC driver doesn't have enough information to know when it's safe to
switch the clock off, so for now it will be kept on permanently.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260116123732.140813-1-thierry.reding@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Clean up device link creation by bailing out early in case the SMI
platform device lookup fails.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251121164624.13685-4-johan@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Make sure to drop the reference taken when looking up the SMI device
during larb probe on late probe failure (e.g. probe deferral) and on
driver unbind.
Fixes: cc8bbe1a8312 ("memory: mediatek: Add SMI driver")
Fixes: 038ae37c510f ("memory: mtk-smi: add missing put_device() call in mtk_smi_device_link_common")
Cc: stable@vger.kernel.org # 4.6: 038ae37c510f
Cc: stable@vger.kernel.org # 4.6
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251121164624.13685-3-johan@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Make sure to drop the reference taken when looking up the SMI device
during common probe on late probe failure (e.g. probe deferral) and on
driver unbind.
Fixes: 47404757702e ("memory: mtk-smi: Add device link for smi-sub-common")
Fixes: 038ae37c510f ("memory: mtk-smi: add missing put_device() call in mtk_smi_device_link_common")
Cc: stable@vger.kernel.org # 5.16: 038ae37c510f
Cc: stable@vger.kernel.org # 5.16
Cc: Yong Wu <yong.wu@mediatek.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251121164624.13685-2-johan@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
|
Commit a52ddb98a674 ("memory: tegra186-emc: Simplify and handle deferred
probe with dev_err_probe()") accidently dropped a call to 'put_bpmp' to
release a handle to the BPMP when getting the EMC clock fails. Fix this
by restoring the 'goto put_bpmp' if devm_clk_get() fails.
Fixes: a52ddb98a674 ("memory: tegra186-emc: Simplify and handle deferred probe with dev_err_probe()")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20251106190550.1776974-1-jonathanh@nvidia.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The original commit had typos for two of the memory client ids. Fix them
to reference the correct bindings.
Fixes: 3804cef4c597 ("memory: tegra210: Use bindings for client ids")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Link: https://patch.msgid.link/20251021-t210-mem-clientid-fixup-v1-1-5094946faa31@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
On RZ/G3E using PSCI, s2ram powers down the SoC. Add suspend/resume
callbacks to control spi/spix2 clocks.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251019180940.157088-1-biju.das.jz@bp.renesas.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Replace "tegra_emc" with "tegra30_emc" in all functions to:
1. Avoid name clashing with other Tegra EMC drivers which makes it
easier to jump to function definitions,
2. Decode the calltraces a bit easier,
3. Unify with other Tegra MC and EMC drivers, which use the SoC model
prefixes.
No functional impact.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Replace "tegra_emc" with "tegra20_emc" in all functions to:
1. Avoid name clashing with other Tegra EMC drivers which makes it
easier to jump to function definitions,
2. Decode the calltraces a bit easier,
3. Unify with other Tegra MC and EMC drivers, which use the SoC model
prefixes.
No functional impact.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Replace "tegra_emc" with "tegra186_emc" in all functions to:
1. Avoid name clashing with other Tegra EMC drivers which makes it
easier to jump to function definitions,
2. Decode the calltraces a bit easier,
3. Unify with other Tegra MC and EMC drivers, which use the SoC model
prefixes.
No functional impact.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Replace "tegra_emc" with "tegra124_emc" in all functions to:
1. Avoid name clashing with other Tegra EMC drivers which makes it
easier to jump to function definitions,
2. Decode the calltraces a bit easier,
3. Unify with other Tegra MC and EMC drivers, which use the SoC model
prefixes.
No functional impact.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Certain calls, like clk_get, can cause probe deferral and driver should
handle it. Use dev_err_probe() to fix that and also change other
non-deferred errors cases to make the code simpler.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Certain calls, like clk_get, can cause probe deferral and driver should
handle it. Use dev_err_probe() to fix that and also change other
non-deferred errors cases to make the code simpler.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Certain calls, like clk_get, can cause probe deferral and driver should
handle it. Use dev_err_probe() to fix that and also change other
non-deferred errors cases to make the code simpler.
Also fix missing new line in error message of devm_devfreq_add_device().
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Certain calls, like clk_get, can cause probe deferral and driver should
handle it. Use dev_err_probe() to fix that and also change other
non-deferred errors cases to make the code simpler.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
icc_node_create() is alloc-like function, so no need to print error
messages on its failure. Dropping one label makes the code a bit
simpler.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
icc_node_create() is alloc-like function, so no need to print error
messages on its failure. Dropping one label makes the code a bit
simpler.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
icc_node_create() is alloc-like function, so no need to print error
messages on its failure. Dropping one label makes the code a bit
simpler.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
icc_node_create() is alloc-like function, so no need to print error
messages on its failure. Dropping one label makes the code a bit
simpler.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
emc_init() returns always success, so just drop the return value to
simplify it.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Since the related binding is being added, use that for the client ids
instead of hardcoded magic numbers.
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
The of_platform_populate() call at the end of the function has a
possible failure path, causing a resource leak.
Replace of_iomap() with devm_platform_ioremap_resource() to ensure
automatic cleanup of srom->reg_base.
This issue was detected by smatch static analysis:
drivers/memory/samsung/exynos-srom.c:155 exynos_srom_probe()warn:
'srom->reg_base' from of_iomap() not released on lines: 155.
Fixes: 8ac2266d8831 ("memory: samsung: exynos-srom: Add support for bank configuration")
Cc: stable@vger.kernel.org
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Link: https://lore.kernel.org/r/20250806025538.306593-1-zhen.ni@easystack.cn
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
If "st,omm-req2ack-ns" property is found and its value is not 0,
the current test doesn't allow to compute and set req2ack value,
Fix this test.
Fixes: 8181d061dcff ("memory: Add STM32 Octo Memory Manager driver")
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20250807-upstream_omm_fix_req2ack_test_condition-v2-1-d7df4af2b48b@foss.st.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.17
1. Several cleanups: Use dev_fwnode() in OMAP GPMX, convert
arm,pl172.txt DT bindings to DT schema, use
syscon_regmap_lookup_by_phandle_args() wrapper, correct kerneldoc.
2. Mediatek MT8186 SMI: Extend hardware bandwidth limits to fix VENC
hardware during stress testing.
3. Broadcom brcmstb_memc: Add additional fallback compatible and
simplify device driver matching. The change comes from Broadcom
SoC maintainer (Florian Fainelli), thus its ABI impact is
acknowledged.
* tag 'memory-controller-drv-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
dt-bindings: memory: renesas,rzg3e-xspi: Document RZ/V2H(P) and RZ/V2N support
memory: brcmstb_memc: Simplify compatible matching
dt-bindings: memory-controller: Define fallback compatible
memory: omap-gpmx: Use dev_fwnode()
memory: mtk-smi: Add ostd setting for mt8186
dt-bindings: memory-controllers: convert arm,pl172.txt to yaml format
memory: stm32_omm: Use syscon_regmap_lookup_by_phandle_args
memory: emif: Add missing kerneldoc for lpmode
Link: https://lore.kernel.org/r/20250715095315.59299-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support to enable Memory Controller (MC) and External Memory
Controller (EMC) drivers for Tegra264. The nodes for MC and EMC are
mostly the same as Tegra234 but differ in number of channels and
interrupt numbers.
The patch also adds the bandwidth manager definitions required for
Tegra264 and uses them to populate the memory client table. All of
these are needed to properly enable memory interconnect (ICC) support.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250709222147.3758356-3-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Now that a "brcm,brcmstb-memc-ddr-rev-b.2.x" fallback compatible string
has been defined, we can greatly simplify the matching within the driver
to only look for that compatible string and nothing else.
The fallback "brcm,brcmstb-memc-ddr" is also updated to assume the V21
register layout since that is the most common nowadays.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250609212356.2264244-3-florian.fainelli@broadcom.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20250611104348.192092-12-jirislaby@kernel.org
[krzk: Dropped redundant parts of commit msg]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
