| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
clang-22 warns about csiphy_match_clock_name() taking a variable format
string that is not checked against the 'int index' argument:
drivers/media/platform/qcom/camss/camss-csiphy.c:566:44: error: diagnostic behavior may be improved by
adding the 'format(printf, 2, 3)' attribute to the declaration of 'csiphy_match_clock_name'
[-Werror,-Wmissing-format-attribute]
561 | static bool csiphy_match_clock_name(const char *clock_name, const char *format,
| __attribute__((format(printf, 2, 3)))
562 | int index)
563 | {
564 | char name[16]; /* csiphyXXX_timer\0 */
565 |
566 | snprintf(name, sizeof(name), format, index);
| ^
drivers/media/platform/qcom/camss/camss-csiphy.c:561:13: note: 'csiphy_match_clock_name' declared here
561 | static bool csiphy_match_clock_name(const char *clock_name, const char *format,
| ^
Change the function to use a snprintf() style format string that allows this
to be checked at the call site.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add missing required clocks (cpas_ahb and camnoc_axi) for VFE lite
instances on sa8775p platform. These clocks are necessary for proper
VFE lite operation:
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Fixes: e7b59e1d06fb ("media: qcom: camss: Add support for VFE 690")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix the mismatch between clock list and clock rate table for CSID lite
instances. The current implementation has 5 clocks defined but only 2
are actually needed (vfe_lite_csid and vfe_lite_cphy_rx), while the
clock rate table doesn't match this configuration.
Update both clock list and rate table to maintain consistency:
- Remove unused clocks: cpas_vfe_lite, vfe_lite_ahb, vfe_lite
- Update clock rate table to match the remaining two clocks
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Fixes: ed03e99de0fa ("media: qcom: camss: Add support for CSID 690")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix BUF_DONE_IRQ_STATUS_RDI_OFFSET calculation for csid lite on
sa8775p platform. The offset should be 0 for csid lite on sa8775p,
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Fixes: ed03e99de0fa ("media: qcom: camss: Add support for CSID 690")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Follow the commit bfe1326573ff ("venus: Fix for H265 decoding failure.")
and increase H265D_MAX_SLICE following firmware requirements on that
platform. Otherwise decoding of the H.265 streams fails with the
"insufficient scratch_1 buffer size" from the firmware.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
[bod: Fixed commit log withthe => with the]
Fixes: e1f5d32608ec ("media: iris: Add internal buffer calculation for HEVC and VP9 decoders")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
During concurrency testing, multiple instances can run in parallel, and
each instance uses its own inst->lock while the core->lock protects the
list of active instances. The race happens because these locks cover
different scopes, inst->lock protects only the internals of a single
instance, while the Macro Blocks Per Frame (MBPF) checker walks the
core list under core->lock and reads fields like fmt_src->width and
fmt_src->height. At the same time, iris_close() may free fmt_src and
fmt_dst under inst->lock while the instance is still present in the core
list. This allows a situation where the MBPF checker, still iterating
through the core list, reaches an instance whose fmt_src was already
freed by another thread and ends up dereferencing a dangling pointer,
resulting in a use-after-free. This happens because the MBPF checker
assumes that any instance in the core list is fully valid, but the
freeing of fmt_src and fmt_dst without removing the instance from the
core list is not correct.
The correct ordering is to defer freeing fmt_src and fmt_dst until after
the instance has been removed from the core list and all teardown under
the core lock has completed, ensuring that no dangling pointers are ever
exposed during MBPF checks.
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Fixes: 5ad964ad5656 ("media: iris: Initialize and deinitialize encoder instance structure")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Currently the driver switches the vcodec GDSC to hardware (HW) mode
before firmware load and boot sequence. GDSC can be powered off, keeping
in hw mode, thereby the vcodec registers programmed in TrustZone (TZ)
carry default (reset) values.
Move the transition to HW mode after firmware load and boot sequence.
The bug was exposed with driver configuring different stream ids to
different devices via iommu-map. With registers carrying reset values,
VPU would not generate desired stream-id, thereby leading to SMMU fault.
For vpu4, when GDSC is switched to HW mode, there is a need to perform
the reset operation. Without reset, there are occasional issues of
register corruption observed. Hence the vpu GDSC switch also involves
the reset.
Co-developed-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: occassional => occasional]
Fixes: dde659d37036 ("media: iris: Introduce vpu ops for vpu4 with necessary hooks")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The core->iface_q_table_vaddr buffer is alloc'd with size queue_size
but freed with sizeof(*q_tbl_hdr) which is different.
Change the dma_free_attrs() size.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Fixes: d7378f84e94e ("media: iris: introduce iris core state management with shared queues")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The recent change in commit 1dabf00ee206 ("media: iris: gen1: Destroy
internal buffers after FW releases") introduced a regression where
session_release_buf() may free the buffer. The caller,
iris_release_internal_buffers(), continued to access `buffer` after the
call, leading to a potential use-after-free.
Fix this by setting BUF_ATTR_PENDING_RELEASE before calling
session_release_buf(), and reverting the flag if the call fails. This
ensures no dereference occurs after potential freeing.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Closes: https://lore.kernel.org/lkml/aYXvKAX3Pg3sL37P@stanley.mountain/#r
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Fixes: 1dabf00ee206 ("media: iris: gen1: Destroy internal buffers after FW releases")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
When build-testined with CONFIG_QCOM_MDT_LOADER=m and VIDEO_QCOM_IRIS=y,
the kernel fails to link:
x86_64-linux-ld: drivers/media/platform/qcom/iris/iris_firmware.o: in function `iris_fw_load':
iris_firmware.c:(.text+0xb0): undefined reference to `qcom_mdt_get_size'
iris_firmware.c:(.text+0xfd): undefined reference to `qcom_mdt_load'
The problem is the conditional 'select' statement. Change this to
make the driver built-in here regardless of CONFIG_ARCH_QCOM.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Fixes: d19b163356b8 ("media: iris: implement video firmware load/unload")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
When build-testined with CONFIG_QCOM_MDT_LOADER=m and VIDEO_QCOM_VENUS=y,
the kernel fails to link:
x86_64-linux-ld: drivers/media/platform/qcom/venus/firmware.o: in function `venus_boot':
firmware.c:(.text+0x1e3): undefined reference to `qcom_mdt_get_size'
firmware.c:(.text+0x25a): undefined reference to `qcom_mdt_load'
firmware.c:(.text+0x272): undefined reference to `qcom_mdt_load_no_init'
The problem is the conditional 'select' statement. Change this to
make the driver built-in here regardless of CONFIG_ARCH_QCOM,
same as for the similar IRIS driver.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Fixes: 0399b696f7f4 ("media: venus: fix compile-test build on non-qcom ARM platform")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"Mark 'data' argument in rpmsg_send() const, and perculate to related
drivers. Replace deprecated class_destroy() with class_unregister()"
* tag 'rpmsg-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
media: platform: mtk-mdp3: Constify buffer passed to mdp_vpu_sendmsg()
ASoC: qcom: Constify GPR packet being send over GPR interface
rpmsg: Constify buffer passed to send API
remoteproc: mtk_scp: Constify buffer passed to scp_send_ipi()
remoteproc: mtk_scp_ipi: Constify buffer passed to scp_ipi_send()
drivers: rpmsg: class_destroy() is deprecated
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new CSI tegra support, covering Tegra20 and Tegra30
- new camera sensor drivers: T4ka3 and ov2732
- m88ds3103: add 3103c chip support
- uvcvideo: add support for Intel RealSense D436/D555 and P010 pixel format
- synopsys csi2rx: add i.MX93 support
- imx8-isi: add i.MX95 support
- imx8mq-mipi-csi2: add i.MX8ULP support
- dw100: add V4L2 requests support
- support for DTV devices from Hauppauge got some improvements
- media staging: dropped starfive-camss driver
- media docs: document multi-committers model and improve maint profile
- media core:
- add v4l2_subdev_get_frame_desc_passthrough() helper
- improve error handling in fwnode parsing
- lots of driver fixes, cleanups and improvements
* tag 'media/v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (251 commits)
Revert "media: cx231xx: add USB ID 2040:8360 for Hauppauge WinTV-HVR-935"
media: synopsys: csi2rx: add i.MX93 support
media: dt-bindings: add NXP i.MX93 compatible string
media: synopsys: csi2rx: Use enum and u32 array for register offsets
media: synopsys: csi2rx: implement .get_frame_desc() callback
media: synopsys: csi2rx: only check errors from devm_clk_bulk_get_all()
media: synopsys: csi2rx: use devm_reset_control_get_optional_exclusive()
media: i2c: imx283: add support for non-continuous MIPI clock mode
media: i2c: ov08d10: add support for 24 MHz input clock
media: i2c: ov08d10: add support for reset and power management
media: i2c: ov08d10: add support for binding via device tree
dt-bindings: media: i2c: document Omnivision OV08D10 CMOS image sensor
media: i2c: ov08d10: add missing newline to prints
media: i2c: ov08d10: fix some typos in comments
media: i2c: ov08d10: remove duplicate register write
media: i2c: ov08d10: fix image vertical start setting
media: i2c: ov08d10: fix runtime PM handling in probe
staging: media: ipu7: Update TODO
media: Add t4ka3 camera sensor driver
media: i2c: Add ov2732 image sensor driver
...
|
|
mdp_vpu_sendmsg() passes the buffer to scp_ipi_send(), which takes now
pointer to const, so adjust this interface as well for increased code
safety and code readability.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260317-rpmsg-send-const-v3-5-4d7fd27f037f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The i.MX93 uses a newer version of the DW CSI-2 controller with a changed
register layout and an integrated Image Pixel Interface (IPI), which
converts the received CSI-2 packets from byte to pixel format and produces
a pixel data bus containing vertical and horizontal synchronization
information.
The reset flow also differs, so add the .assert_reset(), .deassert_reset(),
and .idi_enable() callbacks to support it.
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
[Sakari Ailus: include missing linux/bitfield.h.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Use enum dw_mipi_csi2rx_regs_index together with a u32 array to describe
register offsets. This allows supporting new IP versions with different
register layouts in a structured way.
Add rk3568_regs matching the previous macro definitions and pass it as
driver data during probe.
No functional change intended.
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Implement the .get_frame_desc() callback to fetch information from the
remote endpoint.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
devm_clk_bulk_get_all() returns all clocks described in the DT, which are
already validated by the binding. Do not need enforce an expected clock
count.
Only check for error returns (< 0) to support more SoCs.
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The DW MIPI CSI-2 RX is used on different SoCs, not all of which provide a
reset controller. Switch to devm_reset_control_get_optional_exclusive()
to support such platforms.
Reset presence and numbering are validated by the DT binding.
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The state initialization function vsp1_entity_init_state() incorrectly
leaves the last entity pad out when initializing formats due to an off
by one error. Fix it.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-14-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The V4L2 API requires drivers that expose controls to implement control
notification events. This is enforced by v4l2-compliance. Add event
handling to the VSP1 entities that create controls to fix the compliance
failures.
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-13-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The histogram .set_fmt() handler suffers from two problems:
- When operating on the source pad, it returns correct information to
userspace, but does not store the format in the subdev state.
Subsequent calls to .get_fmt(), handled by the
vsp1_subdev_get_pad_format() helper, will not return the correct
information.
- When operating on the sink pad, it uses the
vsp1_subdev_set_pad_format(), which propagates the sink format to the
source, incorrectly overwriting the fixed source format.
The first issue could be fixed by implementing the set format operation
with vsp1_subdev_get_pad_format() on the source pad, if it wasn't that
.set_fmt() is also used to initialize the subdev state in
vsp1_entity_init_state(). The histogram would need a custom
.init_state() handler.
As the second issue would anyway overwrite the format, and therefore
requires a custom .set_fmt() implementation, fix both issues without
using the helpers.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-12-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The histogram supports size enumeration on the sink pad only, as the
source pad outputs a metadata format. The correct error code when
enumeration is not supported is -ENOTTY, not -EINVAL. Fix it.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-11-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The histogram media bus code enumeration does not check the index when
operating on the source pad, resulting in an infinite loop if userspace
keeps enumerating code without any loop boundary. Fix it by returning an
error for indices larger than 0 as the pad supports a single format.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-10-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The HSIT entity performs format conversion, which leads to incorrect
results with the vsp1_subdev_enum_frame_size() helper. Implement a
custom .enum_frame_size() handler that correctly validates the media bus
code. Size validation is identical to the helper.
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-9-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The format width and height is never propagated to the BRX source pad,
leaving its initial configuration invalid. Propagate the whole format
from the first sink pad to the source pad instead of only propagating
the media bus code. This fixes compliance with the subdev format
propagation rules.
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-8-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The RWPF can't freely convert between all input and output formats. They
support RGB <-> YUV conversion, but HSV formats can't be converted. Fix
the media bus code and frame size enumeration to take this into account
on the source pad.
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-7-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The vsp1 driver doesn't enforce a minimum value on the RPF crop rectangle
width and height. Empty rectangles are accepted, leading to incorrect
hardware behaviour. Fix it by adding minimum width and height
constraints to the value clamping.
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-6-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The RPF doesn't enforces the alignment constraint on the sink pad
format, which could have an odd size, possibly down to 1x1. In that
case, the upper bounds for the left and top coordinates clamping would
become negative, cast to a very large positive value. Incorrect crop
rectangle coordinates would then be incorrectly accepted.
A second issue can occur when the requested left and top coordinates are
negative. They are cast to a large unsigned value, clamped to the
maximum. While the calculation will produce valid values for the
hardware, this is not compliant with the V4L2 specification that
requires values to be adjusted to the closest valid value.
Fix both issues by switching to signed clamping, with an explicit
minimum to adjust negative values, and adjusting the clamp bounds to
avoid negative upper bounds.
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-5-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The media bus code passed to the .enum_frame_size() operation for the
sink pad is required to be supported by the device, but not to match the
current format. All entities that use the vsp1_subdev_enum_frame_size()
helper, as well as the SRU and UDS entities that implement the operation
manually, perform the check incorrectly.
Fix the issue by implementing the correct code check in the
vsp1_subdev_enum_frame_size(). For the SRU and UDS, to avoid duplicating
code, use the vsp1_subdev_enum_frame_size() as a base and override the
enumerated size on the source pad with entity-specific constraints.
While at it, include the missing <linux/mutex.h> as the code locks
mutexes.
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-4-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Most entities use the vsp1_subdev_enum_frame_size() and
vsp1_subdev_set_pad_format() helper functions to implement the
corresponding subdev operations. Both helpers are given the minimum and
maximum sizes supported by the entity as arguments, requiring each
entity to implement a wrapper.
Replace the function arguments with storing the size limits in the
vsp1_entity structure. This allows dropping most of the
.enum_frame_size() and .set_fmt() wrappers in entities.
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Most entities use the vsp1_subdev_enum_mbus_code() and
vsp1_subdev_set_pad_format() helper functions to implement the
corresponding subdev operations. Both helpers are given the list of
supported media bus codes as arguments, requiring each entity to
implement a wrapper.
Replace the function arguments with storing the supported media bus
codes in the vsp1_entity structure. This allows dropping most of the
.enum_mbus_code() wrappers from entities.
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-2-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The CSI-2 receiver in i.MX8ULP is almost same as i.MX8QXP/QM except
clocks and resets, so add compatible string for i.MX8ULP to handle
the difference and reuse platform data of i.MX8QXP/QM.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Link: https://patch.msgid.link/20251205-csi2_imx8ulp-v10-4-190cdadb20a3@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Call reset_control_deassert() to explicitly release reset to make sure
reset bits are cleared since platform like i.MX8ULP can't clear reset
bits automatically.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Link: https://patch.msgid.link/20251205-csi2_imx8ulp-v10-3-190cdadb20a3@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Use devm_clk_bulk_get_all() helper to simplify clock handle code.
No functional changes intended.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20251205-csi2_imx8ulp-v10-2-190cdadb20a3@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The ISI module on i.MX95 supports up to eight channels and four link
sources to obtain the image data for processing in its pipelines. It
can process up to eight image sources at the same time.
Add ISI basic functions support for i.MX95.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20251105-isi_imx95-v3-3-3987533cca1c@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The field BLANK_PXL provides the value of the blank pixel to be inserted
in the image in case an overflow error occurs in the output buffers of
the channel. Its default value is 0xff, so no need to set again.
Besides, the field only exist in i.MX8QM/XP ISI version. Other versions
like i.MX 8M series, remove the field since it won't send data to AXI bus
when overflow error occurs and mark BLANK_PXL as reserved. i.MX9 series
use it for other purposes.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Link: https://patch.msgid.link/20251105-isi_imx95-v3-2-3987533cca1c@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Fix a hang issue when capturing a single frame with applications like cam
in libcamera. It would hang waiting for the driver to complete the buffer,
but streaming never starts because min_queued_buffers was set to 2.
The ISI module uses a ping-pong buffer mechanism that requires two buffers
to be programmed at all times. However, when fewer than 2 user buffers are
available, the driver use internal discard buffers to fill the remaining
slot(s). Reduce minimum queued buffers from 2 to 0 allows streaming to
start without any queued buffers.
Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260312-isi_min_buffers-v2-1-d5ea1c79ad81@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The dw100_start() function is only called from dw100_device_run(). As
both functions are not too big, move the code directly into
dw100_device_run() and drop dw100_start() to improve readability.
This patch contains no functional changes.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260304-sklug-v6-16-topic-dw100-v3-1-dev-v5-4-1a7e1f721b50@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
On kernels with PREEMPT_RT enabled, a "BUG: scheduling while atomic"
kernel oops occurs inside dw100_irq_handler -> vb2_buffer_done. This is
because vb2_buffer_done takes a spinlock which is not allowed within
interrupt context on PREEMPT_RT.
The first attempt to fix this was to just drop the IRQF_ONESHOT so that
the interrupt is handled threaded on PREEMPT_RT systems. This introduced
a new issue. The dw100 has an internal timeout counter that is gated by
the DW100_BUS_CTRL_AXI_MASTER_ENABLE bit. Depending on the time it takes
for the threaded handler to run and the geometry of the data being
processed it is possible to reach the timeout resulting in
DW100_INTERRUPT_STATUS_INT_ERR_TIME_OUT being set and "dw100
32e30000.dwe: Interrupt error: 0x1" errors in dmesg.
To properly fix that, split the interrupt into two halves, reset the
DW100_BUS_CTRL_AXI_MASTER_ENABLE bit in the hard interrupt handler and
do the v4l2 buffer handling in the threaded half. The IRQF_ONESHOT can
still be dropped as the interrupt gets disabled in the hard handler and
will only be reenabled on the next dw100_device_run which will not be
called before the current job has finished.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260304-sklug-v6-16-topic-dw100-v3-1-dev-v5-3-1a7e1f721b50@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Implement dynamic vertex map updates by handling the
V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP control during streaming. This
allows to implement features like dynamic zoom, pan, rotate and dewarp.
To stay compatible with the old version, updates of
V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP are ignored during streaming
when requests are not used. Print a corresponding warning once.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260304-sklug-v6-16-topic-dw100-v3-1-dev-v5-2-1a7e1f721b50@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The dw100 dewarper hardware present on the NXP i.MX8MP allows very
flexible dewarping using a freely configurable vertex map. Aside from
lens dewarping the vertex map can be used to implement things like
arbitrary zoom, pan and rotation. The current driver supports setting
that vertex map before calling VIDIOC_STREAMON.
To control above mentioned features during streaming it is necessary to
update the vertex map dynamically. To do that in a race free manner V4L2
requests support is required. Add V4L2 requests support to prepare for
dynamic vertex map updates.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260304-sklug-v6-16-topic-dw100-v3-1-dev-v5-1-1a7e1f721b50@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Add dev_err_probe() to all error branches in the *async_register() helpers
to provide clearer diagnostic information when device registration fails.
Drop the explicit error message after returning from
mipi_csis_async_register(), as the error is already reported by this
helper.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260121-cam_cleanup-v5-1-01d1ab38db9d@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Reject unsupported pixel formats in rkisp1_enum_framesizes() to
fix v4l2-compliance failure.
v4l2-compliance test failure:
fail: ../utils/v4l2-compliance/v4l2-test-formats.cpp(403): Accepted framesize for invalid format
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: FAIL
Tested on: Debix i.MX8MP Model A
Kernel version: v6.17-rc3
v4l2-compliance: 1.31.0-5387
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Link: https://patch.msgid.link/20250829101425.95442-1-tarang.raval@siliconsignals.io
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Scheduling of work items with an async workqueue opens the door to
potential races between multiple instances of a work item.
While the frame transfer function is now protected against races, using
a workqueue doesn't provide much benefit considering the limited cost of
creating a job transfer.
Replace the usage of the work queue with direct function calls.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The scheduling of a new buffer transfer in the IVC driver is triggered
by two occurrences of the "frame completed" interrupt.
The first interrupt occurrence identifies when all image data have been
transferred to the ISP, the second occurrence identifies when the
post-transfer VBLANK has completed and a new buffer can be transferred.
Under heavy system load conditions the actual execution of the workqueue
item might be delayed and two items might happen to run concurrently,
leading to a new frame transfer being triggered while the previous one
has not yet finished.
This error condition is only visible because the driver maintains a
status variable that counts the number of interrupts since the last
transfer, and warns in case an IRQ happens before the counter has been
reset.
To ensure sequential execution of the worqueue items and avoid a double
buffer transfer to run concurrently, protect the whole function body
with the spinlock that so far was solely used to reset the counter and
inspect the interrupt counter variable at the beginning of the buffer
transfer function.
As soon as the ongoing transfer completes, the workqueue item will be
re-scheduled and will consume the pending buffer.
Cc: stable@vger.kernel.org
Fixes: f0b3984d821b ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
The list of buffers (`rzv2h_ivc::buffers.queue`) is protected by a
spinlock (`rzv2h_ivc::buffers.lock`). However, in
`rzv2h_ivc_transfer_buffer()`, which runs in a separate workqueue, the
`list_del()` call is executed without holding the spinlock, which makes
it possible for the list to be concurrently modified
Fix that by removing a buffer from the list in the lock protected section.
Cc: stable@vger.kernel.org
Fixes: f0b3984d821b ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <barn |
