| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Needed for DML to function with DCN42B.
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add HDMI FRL bits to DML 2.0
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Add bounding box for dcn42b
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Add pmo_dcn42_init_for_pstate_support mirroring the DCN4 FAMS2 version,
but dropping the meta build for scheduling check that is unnecessary and
skipping the cofunctionality check.
This solves vrr validation issues in multidisplay configs.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The MinTTU policy in DML2.1 does not guarantee that we support p-state
in blank. This is a delta vs dml2 and earlier revisions as the prefetch
mode override has been removed in favor of a more configurable pstate
optimizer.
[How]
The policy has been added in a prior patch, this patch enables it based
on pmo flag.
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
A recent type change made the lower-bound part of the OTG instance
assert redundant, which can trigger static-analysis noise and distract
from actionable diagnostics.
[How]
Kept the meaningful upper-bound range validation required for safe
narrowing to uint8_t. Removed the redundant non-negative portion of the
assert so the check matches current type semantics. Revalidated with the
latest debug build log: no warnings and no build-failure markers.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Introduce dc_plane_cm struct.
TRIM_CM2 flag is used to synchronize between old and new implementation.
[How]
Introduce dc_plane_cm struct.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
In dml2_translation_helper.c, rename the inner loop index inside
dml2_init_soc_states() for several project cases
to avoid shadowing the outer function-scope index variable.
In display_mode_core.c, replace shift-based power-of-two expressions
used to compute dpte_row_height and dpte_row_height_linear with an
equivalent floating-point power function, consistent with existing
usage elsewhere in the file.
Behavior for valid inputs is preserved in both cases.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Fixes a warning by adding bounds checks and index validation in dml2_0
sources to address static analysis warnings. Ensures safe array access and
prevents out-of-bounds reads by validating indices before use, improving
robustness and reliability in the affected files.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Legacy files were used for the transition period between DML1 and DML2.
Fully transitioned away from DML1 so these legacy files can be removed
since they are not actively being used.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Zheng Austin <Austin.Zheng@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
subvp_vblank_schedulable() checks whether the SubVP active region can
fit the prefetch time, vblank frame time, and the larger of the vblank
blanking time and MALL region.
Commit 11236ac905e7 ("drm/amd/display: Fix dml2_0 narrowing boundaries")
changed the intermediate timing variables from u16 to u32. After that
change, the schedulability test:
subvp_active_us - prefetch_us - vblank_frame_us -
max_vblank_mallregion > 0
is evaluated in unsigned arithmetic. If the required time exceeds the
available active time, the subtraction can underflow and wrap, producing
a large positive value instead of a negative result.
Fix this by comparing the available time against the required time
directly, using u64 for the accumulated required duration.
v2:
- Use uint64_t instead of u64 for consistency with DC style (Dillon)
- Make all terms explicitly uint64_t in the accumulated sum & use
single-definition form for required_us (Gaghik)
Fixes: 11236ac905e7 ("drm/amd/display: Fix dml2_0 narrowing boundaries")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dillon Varone <dillon.varone@amd.com>
Cc: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why/How]
Add README.md file to repository
Use it to categorize directories for tracking purposes
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why] drm/amd/display dml2_0 code had implicit narrowing conversions reported by
a warning in timing, watermark, and translation paths.
[How] Apply explicit boundary casts for intentional narrowing, preserve wider
intermediate math, and use wider timing intermediates where required for safe
range handling.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
Vertical front porch (vfp) must be greater than 1, and must be patched
if it isn't. This must be done pre-DML so the DLG programming remains
consistent with the OTG programming.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove all references to dml2_project_dcn40 from dml2.
The project is not used.
Signed-off-by: Roman Li <roman.li@amd.com>
Acked-by: Chenyu Chen <chen-yu.chen@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On PREEMPT_RT kernels, vfree() can sleep because spin_lock is
converted to rt_mutex. dml2_destroy() calls vfree() while inside
an FPU-guarded region (preempt_count=2), which is illegal.
dml2_wrapper_fpu.c is compiled with CC_FLAGS_FPU which defines
_LINUX_FPU_COMPILATION_UNIT, making DC_RUN_WITH_PREEMPTION_ENABLED()
resolve to a no-op. This prevents the macro from cycling FPU
context off/on around vfree().
Move dml2_destroy() to dml2_wrapper.c (non-FPU compilation unit)
where DC_RUN_WITH_PREEMPTION_ENABLED() properly cycles DC_FP_END/
DC_FP_START around vfree(). This pairs it with dml2_allocate_memory()
which already lives there.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Core needs to track pstate schedule admissibility for different global
change scenarios (fclk, temp read, PPT) and requires a reusable way to compute
per-stream frame time from timing parameters.
[How]
Extend dml2_core_internal_mode_support_info with:
fclk_pstate_schedule_admissible
temp_read_pstate_schedule_admissible
ppt_pstate_schedule_admissible
Add dummy_double_array[3][DML2_MAX_PLANES] to
dml2_core_calcs_mode_support_locals.
Introduce dml2_core_utils_get_frame_time_us() in dml2_core_utils.c and export
it in dml2_core_utils.h to compute frame time in microseconds from stream
timing (vline time * (vactive + vblank)).
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
There are few non const input pointer fields. Setting them to const to
prevent future modification of read-only data.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
math_mod() multiplied by arg1 instead of arg2, returning a wrong
result for any non-trivial modulo operation.
[How]
Replace arg1 with arg2 in the subtraction term to correctly
implement fmod(arg1, arg2).
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why/How]
UrgLatency value is passed in twice to the prefetch calculations.
Once through the UrgentLatency term and once through the Turg term.
Only Turg is used in the prefetch calculation so remove the unused UrgentLatency parameter
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Zheng, Austin <Austin.Zheng@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The MinTTU policy in DML2.1 does not guarantee that we support p-state
in blank. This is a delta vs dml2 and earlier revisions as the prefetch
mode override has been removed in favor of a more configurable pstate
optimizer.
[How]
Split off DCN42 with its own PMO helpers so that we can use a simpler
strategy of only allowing the mode if we support p-state in vblank and
if vactive has enough latency hiding.
The actual hookup to use these helpers in the PMO factory will be
done in a later patch to satisfy build system requirements.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add latency update based on memory type to dml2.1
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
To match the HW specification this should be 4, not 256.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Like dml2_0 this isn't guaranteed to be constant for every ASIC.
This can cause corruption or underflow for linear surfaces due to a
wrong PTE_ROW_HEIGHT_LINEAR value if not correctly specified.
[How]
Like dml2_0 pass in the SOC bb into the plane configuration population
functions.
Set both GPUVM and HostVM page sizes in the overrides.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
The MALL and DCC parameters were copied and pasted from a previous ASIC
but the correct value per HW specification should all be 0.
If not correct this can impact urgent bandwidth calculation and PMO.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
This was found back on DML2 but was missed when creating DML2.1.
The bottom layer calculation (CalculateHostVMDynamicLevels) expects
a value in bytes, not KB, but we pass in the value in KB (eg. 4).
This causes an extra page table level to be required in the prefetch
bytes which can be significant overhead - preventing some modes
from being supported that should otherwise be.
[How]
Correct the units by multiplying the input and override values by 1024.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[why]
update according hw spec.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Remove unused legacy tiling format support from dml2.
Legacy asics don't use dml2.
Fixes: e56e3cff2a1b ("drm/amd/display: Sync dcn42 with DC 3.2.373")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why] Resolve warnings by marking unused parameters explicitly.
[How] Keep parameter names in signatures and add a line with
'(void)param;' inside the function body
Preserved function signatures and avoids breaking code paths that
may reference the parameter under conditional compilation.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Clayton King <clayton.king@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Compiler build generates type conversion warnings throughout dc/dml2_0
where values are implicitly narrowed (e.g. int/uint32_t/uint64_t assigned
to uint8_t, unsigned char, char, bool, or dml_bool_t), cluttering build
output and masking genuine issues.
[How]
Add explicit casts at each narrowing assignment with ASSERT guards
to catch out-of-range values in debug builds:
- uint8_t: otg_inst, num_planes, pipe_idx, vblank_index fields
- unsigned char: pipe_dlg_param.otg_inst from tg->inst
- char: mcache num_pipes from num_dpps_required
- bool/dml_bool_t: INTERLACE bitfield and fams2 enable flag use != 0
- uint64_t: widen min_hardware_refresh_in_uhz to hold div64_u64 result,
then cast to unsigned long for min_refresh_uhz with ASSERT
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
FPU guards (DC_FP_START/DC_FP_END) are required to wrap around code that
can manipulates floats. To do this properly, the FPU guards must be used
in a file that is not compiled as a FPU unit. If the guards are used in
a file that is a FPU unit, other sections in the file that aren't guarded
may be end up being compiled to use FPU operations.
[How]
Added DC_FP_START and DC_FP_END to DC functions that call DML functions
using FPU.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
FPU guards (DC_FP_START/DC_FP_END) are required to wrap around code that
can manipulates floats. To do this properly, the FPU guards must be used
in a file that is not compiled as a FPU unit. If the guards are used in
a file that is a FPU unit, other sections in the file that aren't guarded
may be end up being compiled to use FPU operations.
[How]
Removed DC_FP_START and DC_FP_END.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Using the alternative implementation via cm structure of config
lut3d data
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: ChuanYu Tseng <ChuanYu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Fix signed/unsigned mismatch warnings by using the same signedness for a
given value
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Multiple locations in dml2_0 used num_clk_values-1 as array index
without checking if num_clk_values > 0. When num_clk_values is 0,
this results in accessing array index -1, which wraps to 255 for
unsigned types, causing out-of-bounds memory access and potential
crashes.
[How]
Add proper bounds checking using ternary operators to guard all
num_clk_values-1 array accesses. When num_clk_values is 0, return 0
as fallback value instead of accessing invalid memory. This prevents
buffer overflows while maintaining backward compatibility and provides
sensible default behavior for empty clock tables.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Adriano Vero <litaliano00.contact@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- Reworked YCbCr4:2:2 Native/Simple policy decision making with DSC
enabled based on DSC caps and stream signal type
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Relja Vojvodic <Relja.Vojvodic@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why] Compiler generates compiler warnings when signed enum
constants or literal -1 are implicitly converted to unsigned
integer types, cluttering build output and masking genuine issues.
[How] Use UINT_MAX as the invalid sentinel for unsigned IDs and align
loop/index types to unsigned where appropriate to remove implicit
signed-to-unsigned conversions, with no functional behavior change.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If the MRQ is present then these fields are also required to be
plumbed out to the requestor for programming.
[How]
Pipe the fields out through rq_dlg_get_rq_reg.
The implementation follows the previous generation in dml2_0 for DCN35
but adjusted for the new helpers and coding style of dml2_1.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why/How]
Add MRQ flag so it can be passed from ip_caps to ip_params
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why/How]
Patch number of opp based on IP caps
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch provides a bulk merge to align driver
support for DCN42 with Display Core version 3.2.373.
It includes upgrade for:
- clk_mgr
- dml2/dml21
- optc
- hubp
- mpc
- optc
- hwseq
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DML support for DCN 4.2
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add support for DCN 4.2 clock manager.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix static analysis warnings by ensuring swath size temporaries
are initialized before use. No functional change intended.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
0 stream cases do not go through any DML validation which leaves DCN
clocks in unoptimized states.
If requesting DML validation or programming with 0 streams, program
DCN clocks to lowest DPM state.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit addresses multiple warnings by adding defensive
checks for NULL pointers before dereferencing them. The changes ensure
that pointers such as are validated, preventing potential undefined
behavior.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY & HOW]
Remove unused dpp_pipe_count variable.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why & How]
Add missing params to display configuration for dml21
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY&HOW]
Cleanup calculations based on version to improve for future
expansion.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
