aboutsummaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc/dce/dce_link_encoder.c
AgeCommit message (Collapse)AuthorFilesLines
2026-05-05drm/amd/display: Fix type mismatches using guards and explicit castsGaghik Khachatrian1-1/+2
[Why] Address signed/unsigned comparison warnings across dc paths to keep builds warning-clean and improve type safety at comparison boundaries. Most warnings came from signed loop/index temporaries compared against unsigned counters and table sizes, plus a smaller number of mixed signed/unsigned clock, bandwidth, and geometry comparisons. [How] Aligned iterator and temporary variable types with the semantic type of the compared bounds. Used unsigned indices for loops bounded by unsigned counters and table sizes, while retaining signed types where values are semantically signed or participate in arithmetic that may legitimately go negative. Where mixed signed/unsigned comparisons are intentional, applied explicit boundary casts or guarded comparisons instead of broad type changes. No functional behavior changes are intended; this is a warning-resolution and type-alignment cleanup. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: James Lin <pinglei.lin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-04-29drm/amd/display: Allow DCE link encoder without AUX registersTimur Kristóf1-1/+3
Allow constructing the DCE link encoder without DDC, which means the AUX registers array will be NULL. This is necessary to support embedded connectors without DDC. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Link: https://gitlab.freedesktop.org/drm/amd/-/work_items/5192 Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-30drm/amd/display: Fixed Silence complier warnings in dcGaghik Khachatrian1-0/+1
[Why] Resolve compiler warnings by marking unused parameters explicitly. [How] In .c and .h function definitions, keep parameter names in signatures and add a line with `(void)param;` in function body Preserved function signatures and avoids breaking code paths that may reference the parameter under conditional compilation. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com> Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-03-24drm/amd/display: add a no_hpd link_encoder_funcs variantAlex Deucher1-2/+62
For link encoders without HPD (analog or LVDS), add a link_encoder_funcs structure with no hpd enable callbacks. The enable and disable hpd callbacks are currently not used outside of a special case in debugfs which checks if the hpd is valid before using it, but this will protect us if they ever are. Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Enable DAC in DCE link encoderTimur Kristóf1-0/+18
Ensure that the DAC output is enabled at the correct time by moving it to the DCE link encoder similarly to how digital outputs are enabled. This also removes the call to DAC1EncoderControl from the DCE HWSS, which always felt like it was a hacky solution. Fixes: 0fbe321a93ce ("drm/amd/display: Implement DCE analog link encoders (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Tested-by: Mauro Rossi <issor.oruam@gmail.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Initialize DAC in DCE link encoder using VBIOSTimur Kristóf1-0/+10
The VBIOS DAC1EncoderControl() function can initialize the DAC, by writing board-specific values to certain registers. Call this at link encoder hardware initialization time similarly to how the equivalent UNIPHYTransmitterControl initialization is done. This fixes DAC output on the Radeon HD 7790. Also remove the ENCODER_CONTROL_SETUP enum from the dac_encoder_control_prepare_params function which is actually not a supported operation for DAC encoders. Fixes: 0fbe321a93ce ("drm/amd/display: Implement DCE analog link encoders (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Tested-by: Mauro Rossi <issor.oruam@gmail.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-02-19drm/amd/display: Turn off DAC in DCE link encoder using VBIOSTimur Kristóf1-13/+17
Apparently, the VBIOS DAC1EncoderControl function is much more graceful about turning off the DAC. It writes various DAC registers in a specific sequence. Use that instead of just clearing the DAC_ENABLE register. Do this in just the dce110_link_encoder_disable_output function and remove it from the HWSS. Fixes: 0fbe321a93ce ("drm/amd/display: Implement DCE analog link encoders (v2)") Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Tested-by: Mauro Rossi <issor.oruam@gmail.com> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2026-01-05drm/amd/display: Pass proper DAC encoder ID to VBIOSTimur Kristóf1-0/+2
Similarly to the analog_engine field, add a new analog_id field which contains the encoder ID of the analog encoder that corresponds to the link encoder. Previously, the default encoder ID of the link encoder was used, which meant that we passed the wrong ID in case of DVI-I. Fixes: 5834c33fd3f6 ("drm/amd/display: Add concept of analog encoders (v2)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-12-08drm/amd/display: refactor HPD to increase flexibilityDmytro Laktyushkin1-1/+46
Currently all dcn revisions have to follow the same codepath for hotplug detection. This change allows per dcn hpd handling consolidating hpd code in link_encoder. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Signed-off-by: Roman Li <roman.li@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-28drm/amd/display: Implement DCE analog link encoders (v2)Timur Kristóf1-0/+85
We support two kinds of analog connections: 1. DVI-I, which allows both digital and analog signals: The DC code base only allows 1 encoder per connector, and the preferred engine type is still going to be digital. So, for DVI-I to work, we need to make sure the pre-existing link encoder can also work with analog signals. 1. VGA, which only supports analog signals: For VGA, we need to create a link encoder that only works with the DAC without perturbing any digital transmitter functionality. Since dce110_link_encoder already supports analog DVI-I, just reuse that code for VGA as well. v2: Reduce code churn by reusing same link encoder for VGA and DVI-I. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-08-18drm/amd/display: Don't warn when missing DCE encoder capsTimur Kristóf1-4/+4
On some GPUs the VBIOS just doesn't have encoder caps, or maybe not for every encoder. This isn't really a problem and it's handled well, so let's not litter the logs with it. Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 33e0227ee96e62d034781e91f215e32fd0b1d512)
2024-06-27drm/amd/display: Check and log for function error codesAlex Hung1-1/+4
[WHAT & HOW] BIOS_CMD_TABLE_REVISION and link_transmitter_control can return error codes and errors should be reported. This fixes 3 CHECKED_RETURN issues reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amdgpu: Remove a lot of unnecessary ternary operatorsRuan Jinjie1-3/+1
There are many ternary operators, the true or false judgement of which is unnecessary in C language semantics. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-08-09drm/amd/display: Return value of functionDenis Arefev1-1/+1
Added return value check hpd_enable Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Denis Arefev <arefev@swemel.ru> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-01-13drm/amd/display: refactor ddc logic from dc_link_ddc to link_ddcWenjing Liu1-1/+0
[why] 1. Move dd_link_ddc functions to link_ddc. 2. Move link ddc functions declaration exposed in dc to link.h 3. Move link ddc functions declaration exposed in dm to dc_link.h 4. Remove i2caux_interface.h file Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-05drm/amd/display: Move all linux includes into OS typesHarry Wentland1-3/+0
Move all linux includes into OS types. Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-02-02drm/amd/display: add set dp lane settings to link_hwssWenjing Liu1-8/+9
[why] Factor set dp lane settings to link_hwss. v2: fix statement with no effect warning (Alex) Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-12-01drm/amd/display: add hdmi disable debug checkDale Zhao1-2/+3
[Why] Using the hdmi_disable option doesnt disable 6GB bandwidth [How] Add debug.hdmi20_disable flage when checking 6GB enable or not. Reviewed-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Dale Zhao <dale.zhao@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-13drm/amd/display/dc/dce/dce_link_encoder: Remove unused variable 'value0'Lee Jones1-2/+1
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_link_encoder.c: In function ‘dce110_link_encoder_update_mst_stream_allocation_table’: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_link_encoder.c:1506:11: warning: variable ‘value0’ set but not used [-Wunused-but-set-variable] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mauro Rossi <issor.oruam@gmail.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-01-11drm/amd/display/dc/dce/dce_link_encoder: Make functions invoked by reference ↵Lee Jones1-3/+3
static Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_link_encoder.c:1200:6: warning: no previous prototype for ‘dce60_link_encoder_enable_dp_output’ [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_link_encoder.c:1239:6: warning: no previous prototype for ‘dce60_link_encoder_enable_dp_mst_output’ [-Wmissing-prototypes] drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_link_encoder.c:1429:6: warning: no previous prototype for ‘dce60_link_encoder_dp_set_phy_pattern’ [-Wmissing-prototypes] Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mauro Rossi <issor.oruam@gmail.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-12-16drm/amd/display: Add get_dig_frontend implementation for DCExRodrigo Siqueira1-1/+41
Some old ASICs might not implement/require get_dig_frontend helper; in this scenario, we can have a NULL pointer exception when we try to call it inside vbios disable operation. For example, this situation might happen when using Polaris12 with an eDP panel. This commit avoids this situation by adding a specific get_dig_frontend implementation for DCEx. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Cc: Chiawen Huang <chiawen.huang@amd.com> Reported-and-tested-by: Borislav Petkov <bp@suse.de> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-12-15drm/amd/display: add dcn30_link_encoder_validate_output_with_stream to headerEric Bernstein1-1/+1
[Why] dcn30_link_encoder_validate_output_with_stream was a static function. [How] remove the static define and include it in the header. Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-27drm/amd/display: dce_link_encoder: add DCE6 specific macros,functionsMauro Rossi1-0/+369
[Why] DCE6 has no DP_DPHY_SCRAM_CNTL register [How] Add DCE6 specific macros definitions for LE registers DCE6 LE macros will avoid buiding errors when using DCE6 headers Add dce60_set_dp_phy_pattern_hbr2_compliance_cp2520_2() w/o Scramble Control programming Add dce60_set_dp_phy_pattern_passthrough_mode() w/o Scramble Control programming Add dce60_configure_encoder() w/o Scramble Control programming Add dce60_link_encoder_enable_dp_output() w/ dce60_configure_encoder Add dce60_link_encoder_enable_dp_mst_output() w/ dce60_configure_encoder Add dce60_link_encoder_dp_set_phy_pattern() w/ dce60_set_dp_phy_pattern_passthrough_mode Use dce60_link_encoder_enable_dp_output() in dce60_lnk_enc_funcs Use dce60_link_encoder_enable_dp_mst_output() in dce60_lnk_enc_funcs Use dce60_link_encoder_dp_set_phy_pattern() in dce60_lnk_enc_funcs Add DCE6 specific dce60_link_encoder_construct Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mauro Rossi <issor.oruam@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-09drm/amd/display: determine USB C DP2 mode only when USB DP Alt is enabledWenjing Liu1-1/+19
[why] When display is connected with a native DP port, DP2 mode register value is a don't care. Driver mistakenly reduce max supported lane count to 2 lane based on the don't care value. [how] Add additional check only if USB C DP alt mode is enabled, we will determine max lane count supported based on current mode. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-06-10drm/amd: drop use of drmp.h in os_types.hSam Ravnborg1-0/+1
Drop use of the deprecated drmP.h from display/dc/os_types.h Fix all fallout after this change. Most of the fixes was adding a missing include of vmalloc.h. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-4-sam@ravnborg.org
2019-06-10drm/amd: drop dependencies on drm_os_linux.hSam Ravnborg1-0/+2
Fix so no files in drm/amd/ depends on the deprecated drm_os_linux.h header file. It was done manually: - remove drm_os_linux.h from drmP.h - fix all build errros Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-3-sam@ravnborg.org
2019-01-14drm/amd/display: Use 100 Hz precision for pipe pixel clocksKen Chalmers1-3/+3
[Why] Users would like more accurate pixel clocks, especially for fractional "TV" frame rates like 59.94 Hz. [How] Store and communicate pixel clocks with 100 Hz accuracy from dc_crtc_timing through to BIOS command table setpixelclock call. Signed-off-by: Ken Chalmers <ken.chalmers@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-01-14drm/amd/display: remove sink reference in dc_stream_stateJun Lei1-1/+1
[why] dc_stream_state containing a pointer to sink is poor design. Sink describes the display, and the specifications or capabilities it has. That information is irrelevant for dc_stream_state, which describes hardware state, and is generally used for hardware programming. It could further be argued that dc_sink itself is just a convenience dc provides, and DC should be perfectly capable of programming hardware without any dc_sinks (for example, emulated sinks). [how] Phase 1: Deprecate use of dc_sink pointer in dc_stream. Most references are trivial to remove, but some call sites are risky (such as is_timing_changed) with no obvious logical replacement. These will be removed in follow up change. Add dc_link pointer to dc_stream. This is the typical reason DC really needed sink pointer, and most call sites are replaced with this. DMs also need minor updates, as all 3 DMs leverage stream->sink for some functionality. this is replaced instead by a pointer to private data inside dc_stream_state, which is used by DMs as a quality of life improvment for some key functionality. it allows DMs to set pointers have to their own objects which associate OS objects to dc_stream_states (such as DisplayTarget and amdgpu_dm_connector). Without the private pointer, DMs would be forced to perform a lookup for callbacks. Signed-off-by: Jun Lei <Jun.Lei@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: David Francis <David.Francis@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-11-05drm/amd/display: Add link encoder dp_ycbcr420_supported feature flagEric Bernstein1-1/+1
[Why] Need separate feature flag for DP 4:2:0 support, since existing flag is used for HDMI [How] Added dp_ycbcr420_supported to struct encoder_feature_support Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09drm/amd/display: clean up encoding checksEric Yang1-15/+1
[Why] All ASICS we support has YCbCr support, so the check is unnecessary, the currently logic in validate output also returns true all the time, so the unneccessary logic is removed Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-10-09drm/amd/display: block DP YCbCr420 modesEric Yang1-0/+3
[why] Currently not supported, will black screen when set. [How] Fail validate timing helper for those modes. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-27drm/amdgpu/display: add support for LVDS (v5)Alex Deucher1-0/+34
This adds support for LVDS displays. v2: add support for spread spectrum, sink detect v3: clean up enable_lvds_output v4: fix up link_detect v5: remove assert on 888 format Bug: https://bugs.freedesktop.org/show_bug.cgi?id=105880 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-08-13drm/amd/display: Pass connector id when executing VBIOS CTMikita Lipski1-2/+2
[why] Older ASICs require both phys_id and connector_id to execute bios command table. If we are not passing the right connector_id - it can lead to a black screen. [how] Set connector_obj_id when executing vbios command table Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-08-06drm/amd/display: display connected to dp-1 does not light upHersen Wu1-0/+5
[why] for vega, dp set_panel_mode is handled by psp firmware. dal should not program the register again. [how] dal does not program panel mode. Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-13drm/amd/display: add DalEnableHDMI20 key supportCharlene Liu1-0/+6
[why] "DalEnableHDMI20" set to 0, disallow HDMI YCbCr420 and pixel clock > 340Mhz Default is enabled. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-05-15drm/amd/display: Use dig enable to determine fast boot optimization.Yongqiang Sun1-2/+4
Linux doesn't know lid state, better to check dig enable value from register. Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-14drm/amd/display: Use MACROS instead of dm_loggerBhawanpreet Lakha1-2/+1
Use DC_LOGGER macro for logs. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-05drm/amd/display: Default HDMI6G support to true. Log VBIOS table error.Harry Wentland1-3/+13
There have been many reports of Ellesmere and Baffin systems not being able to drive HDMI 4k60 due to the fact that we check the HDMI_6GB_EN bit from VBIOS table. Windows seems to not have this issue. On some systems we fail to the encoder cap info from VBIOS. In that case we should default to enabling HDMI6G support. This was tested by dwagner on https://bugs.freedesktop.org/show_bug.cgi?id=102820 Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-03-05drm/amd/display: define DC_LOGGER for loggerBhawanpreet Lakha1-15/+7
Created a DC_LOGGER define. This is used to pass the logger into the macros. Anywhere we need to use the logger we need to define DC_LOGGER Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-05drm/amd/display: Use MACROS instead of dm_loggerBhawanpreet Lakha1-5/+5
Created MACROS for all log levels. Also Replaced usage of dm_logger_write to the defined MACROS Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: eDP sequence BL off first then DP blank.Charlene Liu1-0/+3
Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Pass signal directly to enable_tmds_outputHarry Wentland1-10/+5
This makes the check for HDMI and dual-link DVI a bit more straightforward. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-19drm/amd/display: Move MAX_TMDS_CLOCK define to headerHarry Wentland1-7/+0
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-14drm/amd/display: Move wait for hpd ready out from edp power control.Yongqiang Sun1-15/+0
It may take over 200ms for wait hpd ready. To optimize the resume time, we can power on eDP in init_hw, wait for hpd ready when doing link training. also create separate eDP enable function to make sure eDP is powered up before doing and DPCD access, as HPD low will result in DPDC transaction failure. After optimization, setpowerstate 145ms -> 9.8ms, DPMS 387ms -> 18.9ms Signed-off-by: Yongqiang Sun <yongqiang.sun@amd.com> Signed-off-by: Tony Cheng <tony.cheng@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-12-06drm/amd/display: Don't use dc_link in link_encoderAndrew Jiang1-19/+15
dc_link is at a higher level than link_encoder, and we only want higher-level components to be able to access lower-level ones, not the other way around. Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-10-21drm/amd/display: add performance trace macro to dcDmytro Laktyushkin1-5/+0
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-10-21drm/amd/display: Move power control from link encoder to hwsequencerAndrew Jiang1-169/+2
A recent commit moved the backlight control code along with the register defines, but did not move the power control code. This along with remnant fields in the dce110_link_enc_registers struct made it so that the code still compiled, but any attempts to access the LVTMA_PWRSEQ_STATE register led to reading from an address of 0. This patch corrects that. Also, rename blacklight_control to edp_backlight_control (Typo fix). Signed-off-by: Andrew Jiang <Andrew.Jiang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-10-21drm/amd/display: moving backlight registers to hwsequencerYue Hin Lau1-76/+3
Signed-off-by: Yue Hin Lau <Yuehin.Lau@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-29amdgpu/dc: make link encoder construct void.Dave Airlie1-3/+1
This only ever returned true. Signed-off-by: Dave Airlie <airlied@redhat.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2017-09-28drm/amd/display: Use kernel alloc/freeHarry Wentland1-1/+1
Abstractions are frowned upon. cocci script: virtual context virtual patch virtual org virtual report @@ expression ptr; @@ - dm_alloc(ptr) + kzalloc(ptr, GFP_KERNEL) @@ expression ptr, size; @@ - dm_realloc(ptr, size) + krealloc(ptr, size, GFP_KERNEL) @@ expression ptr; @@ - dm_free(ptr) + kfree(ptr) v2: use GFP_KERNEL, not GFP_ATOMIC. add cocci script Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit