| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm firmware fixes for v7.3
SCPI fixes address resource leaks and invalid firmware responses, while
FF-A gains shutdown cleanup needed for normal kexec.
- Release the device node reference acquired during SCPI domain lookup.
- Validate SCPI DVFS OPP counts and indices returned by firmware to
prevent out-of-bounds accesses and invalid clock rates.
- Register the SCPI cpufreq device only once across DVFS providers,
preserving the registered device pointer for cleanup and allowing
retries after registration failure.
- Run FF-A teardown during orderly shutdown so notifications, partition
devices and RX/TX mappings are released before a replacement kernel
boots through normal kexec.
Also includes replacing a literal platform device ID with
PLATFORM_DEVID_NONE and correcting an SCMI comment typo.
* tag 'scmi-ffa-fixes-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix typo "upto" in comment
firmware: arm_ffa: Tear down driver during shutdown
clk: scpi: use PLATFORM_DEVID_NONE for scpi-cpufreq
clk: scpi: register scpi-cpufreq once and clear on failure
clk: scpi: bound-check DVFS index in scpi_dvfs_recalc_rate
firmware: arm_scpi: reject DVFS OPP count above MAX_DVFS_OPPS
firmware: arm_scpi: fix device_node leak in scpi_dev_domain_id
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux
* 'for-next/ffa/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Tear down driver during shutdown
* 'for-next/scmi/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix typo "upto" in comment
clk: scpi: use PLATFORM_DEVID_NONE for scpi-cpufreq
clk: scpi: register scpi-cpufreq once and clear on failure
clk: scpi: bound-check DVFS index in scpi_dvfs_recalc_rate
firmware: arm_scpi: reject DVFS OPP count above MAX_DVFS_OPPS
firmware: arm_scpi: fix device_node leak in scpi_dev_domain_id
|
|
This is another run of the Coccinelle script for converting kmalloc()
family of allocations to kmalloc_obj() via the existing rules in
scripts/coccinelle/api/kmalloc_objs.cocci
This catches both the set of kmalloc() uses added since the first
kmalloc_obj() conversions in v7.0 and adds a large group missed in the
first pass due to Coccinelle not interacting well with the cleanup.h
scoped_...() family of macros[1]. I worked around this with spatch's
"--macro-file" argument to a file with all the scoped_...() macros mapped
to Coccinelle's YACFE_ITERATOR[2] as that was the closest viable control
flow indicator I could find.
Build tested allmodconfig on x86, arm64, arm, loongarch, mips, powerpc,
riscv, and s390 with no new warnings.
Link: https://lore.kernel.org/lkml/202609021314.8A9C0B8@keescook/ [1]
Link: https://github.com/coccinelle/coccinelle/blob/master/standard.h [2]
Signed-off-by: Kees Cook <kees+treewide@kernel.org>
|
|
Correct "upto" to "up to", reported by scripts/checkpatch.pl using the
misspelling list in scripts/spelling.txt. Only touches comments, no code
changes.
Assisted-by: Cursor:claude-opus-5
Signed-off-by: Hemanth Selam <hemanth.selam@gmail.com>
Link: https://patch.msgid.link/20260904103732.7320-1-hemanth.selam@gmail.com
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
The platform core invokes a driver's shutdown callback, rather than its
remove callback, while preparing devices for a normal kexec. Without a
shutdown callback, the FF-A driver leaves notifications, partition devices,
and the RX/TX mapping active before the replacement kernel is booted.
Use ffa_remove() for shutdown so the existing cleanup runs before a normal
kexec and other orderly system shutdowns.
Reported-by: Nat Gurumoorthy <natg@google.com>
Closes: https://lore.kernel.org/all/20260729162731.1383875-1-natg@google.com/
Reported-by: Carol L Soto <csoto@nvidia.com>
Closes: https://lore.kernel.org/all/20260818224404.3694580-1-csoto@nvidia.com
Reported-by: Maxi Saparov <masaparov@coreweave.com>
Closes: https://lore.kernel.org/all/20260826222337.73480-1-maxi.saparov@gmail.com
Link: https://patch.msgid.link/20260901131112.3437516-1-sudeep.holla@kernel.org
Tested-by: Carol L Soto <csoto@nvidia.com>
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
scpi_dvfs_get_info() already rejected a zero opp_count, but still trusted
any larger value from the SCP firmware. The shared-memory reply only holds
MAX_DVFS_OPPS entries in buf.opps[]; a bigger count over-reads that array
and then sizes the allocated OPP table incorrectly (garbage OPPs / OOB).
The missing upper bound dates back to the original SCPI DVFS support.
Reject zero and out-of-range counts in one check and return -EINVAL.
Fixes: 8cb7cf56c9fe ("firmware: add support for ARM System Control and Power Interface(SCPI) protocol")
Signed-off-by: Xixin Liu <liuxixin@kylinos.cn>
Link: https://patch.msgid.link/022802f0b38f.v2.1785200642.git.liuxixin@kylinos.cn
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
of_parse_phandle_with_args() takes a reference on clkspec.np that must be
released with of_node_put(). scpi_dev_domain_id() returned clkspec.args[0]
without dropping that reference, so every domain lookup leaked a device
node. Paths such as scpi_dvfs_info() / cpufreq init call this per CPU, so
the leak accumulates over time.
Save the domain id, of_node_put(clkspec.np), then return the saved value.
Signed-off-by: Xixin Liu <liuxixin@kylinos.cn>
Link: https://patch.msgid.link/84fdd490495b.v2.1785200642.git.liuxixin@kylinos.cn
Signed-off-by: Sudeep Holla <sudeep.holla@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"Add a remoteproc driver and binding for AMD MicroBlaze/V soft cores
executing from dual-port BRAM, with clock and reset control and
support for firmware without a resource table.
Introduce a generic Qualcomm PAS service with SCM and OP-TEE backends,
and migrate the PAS, MSS, and WCNSS remoteproc drivers to it. Add Nord
ADSP and CDSP support, Eliza CDSP support, Maili ADSP/CDSP bindings,
and late-attach SoCCP support for Kaanapali, Hawi, Maili, and Glymur.
Enable BAM-DMUX child devices for PAS modems and fix PAS memory
protection, handover, shutdown, and resource lifetime handling.
Harden remoteproc lifecycle handling by attaching asynchronously,
stopping crashed processors, synchronizing crash work with removal,
and forcing shutdown before device resources are released. Reallocate
resources during attach recovery and fix several reference and
error-path leaks.
Add Xilinx R5 crash detection and move RPU start and stop sequencing
into the platform firmware driver. Consolidate write-combining
carveout mapping callbacks, use correct I/O-memory accessors, and
share optional ELF resource-table handling across drivers.
Convert the TI Wakeup M3 binding to DT schema, correct Qualcomm and
generic remoteproc bindings, and harden resource-table iteration
against signed-offset out-of-bounds accesses"
* tag 'rproc-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (60 commits)
remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry()
remoteproc: replace BSD blurb with SPDX identifier in rsc_table.h
remoteproc: replace BSD blurb with SPDX identifier in remoteproc.h
remoteproc: fix coding style issues in remoteproc.h
MAINTAINERS: add rsc_table.h to remoteproc entry
remoteproc: qcom: pas: Add Nord ADSP and CDSP support
dt-bindings: remoteproc: qcom,nord-pas: Document Nord PAS
remoteproc: qcom: pas: Drop unused dtb_mem_region field
remoteproc: qcom: pas: Map/unmap subsystem region before auth_and_reset
remoteproc: qcom: pas: Fix the PAS context creation placement
remoteproc: qcom: pas: Guard dtb metadata release with dtb_pas_id check
remoteproc: qcom: annotate mem_region fields with __iomem
arm64: dts: qcom: eliza: Add fallback compatible for ADSP remoteproc
dt-bindings: remoteproc: qcom,milos-pas: Move Eliza ADSP to SM8550 schema
remoteproc: qcom: pas: Add Eliza CDSP support
dt-bindings: remoteproc: qcom,sm8550-pas: Add Eliza CDSP compatible
remoteproc: qcom: q6v5: Request shutdown if crash is triggered host-side
remoteproc: Force shutdown during device removal
remoteproc: Prevent crash handling to race with rproc_del()
remoteproc: Allow shutdown of crashed processors
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/etc driver updates from Greg KH:
"Here is the big set of char, misc, iio, counter, fpga, and other small
driver subsystems for 7.3-rc1.
Overall, due to some driver removals we only added a bit more code
than removed, which was a nice change. Highlights in this merge
request are:
- Loads of IIO driver updates and additions
- binder driver updates (more on that below...)
- Removal of the SGI XP and GRU drivers as they are not used anymore
and turn out to be pretty insecure overall
- Removal of the obsolete ibmasm driver as it's not being used
anymore
- Coresight driver updates and additions
- Mei driver udpates
- Counter driver updates
- FPGA driver updates
- ICC driver updates
- lots and lots of other tiny driver updates to resolve reported
issues
All of these have been in linux-next for a while"
* tag 'char-misc-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (513 commits)
iio: chemical: atlas-sensor: use iio_trigger_poll_nested() to fix remove UAF
iio: adc: pac1921: fix wrong channel used in trigger handler read
iio: light: gp2ap002: re-enable irq if runtime suspend fails
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
iio: light: apds9306: fix PM reference leak in apds9306_read_data()
iio: gyro: mpu3050: fix sign of raw angular velocity readings
iio: srf04: fix pm_runtime handling on probe error path
iio: adc: ad4080: configure backend data size
iio: adc: adi-axi-adc: add data size support for AD408X backend
iio: chemical: atlas-sensor: fix PM reference leak in buffer postenable
iio: dac: ad5446: fix OF module device table
iio: light: opt4001: Fix reversed GENMASK() arguments in fault count mask
iio: light: opt4001: Reject integration times with a non-zero seconds part
iio: light: opt4001: Fix incompatible pointer type passed to div_u64_rem()
iio: light: opt4001: Fix power down clearing bits of the wrong register
iio: light: opt4060: Fix incorrect register name in threshold read error message
iio: light: opt4060: Fix pointer type passed to div_u64_rem()
iio: light: opt4060: Reject integration times with a non-zero seconds part
iio: light: ltrf216a: fix runtime PM reference leak in error path
iio: pressure: dps310: fix NULL pointer dereference on ACPI probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
- Set a timeout for EFI runtime service completions, and declare the
firmware wedged if it is exceeded. Note that this requires special
handling in case the firmware does return after all
- Rate limit the efivarfs statfs() handler as the QueryVariableInfo()
runtime service can be costly
- Sanity check the size of struct properties_header on Mac/x86
- Tweak the prototype of efi_guid_to_str()
* tag 'efi-next-for-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: Rate limit statfs() handler
efi: apple-properties: validate setup data header length
efi: make efi_guid_to_str() take a const GUID pointer
efi/runtime-wrappers: retire the worker if a wedged call ever returns
efi/runtime-wrappers: honour EFI_RUNTIME_SERVICES in the non-blocking paths
efi/runtime-wrappers: bound the wait for EFI runtime service calls
efi/runtime-wrappers: check EFI_RUNTIME_SERVICES before using efi_rts_work
efi/runtime-wrappers: handle queue_work() failure with goto exit
efi/runtime-wrappers: factor out efi_rts_park_worker()
efi: fix stale reference to efi_recover_from_page_fault()
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- dmemcg eviction support is good for low VRAM things like Steam
Machine
- AMD adds gfx6-8 modifier support for older GPUs that enables a
bunch of wayland stuff
- i915/xe has some new hw support but also a lot of display
refactoring
Everything:
perf:
- export perf_allow_ APIs for xe
udmabuf:
- remove default size limit of 64MB
rust:
- i/o rework (signed tag from driver-core tree)
- add registration guard and registration data
- fix unbounded lifetimes in ioctl handler args
- fix a drm_dev_register race
- gem_shmem: add DmaResvGuard helper
- gpuvm: require send/sync for driver data
- implement send/sync for GpuVaAlloc and GpuVmBo
- add SmContext lifetime
- rename dma_handle to dma_address
- change pci_sriov_get_totalvfs return to unsigned int
core:
- create drm_of_get_panel_orientation
- send per-connector hotplug events
- add thunderbolt UBHR tunneling support
connector:
- add color format property
dmem:
- introduce a peak file
- accept one region per limit
- add dmemcg support for eviction
gpusvm:
- reorg code to give drivers more flexibility
atomic:
- add create_state callback and helper
- add documentation on atomic commit lifetime
buddy:
- add per-order free
- add used block scoreboard
- fix UAF
- test buffer clearance on resume
- add phys_addr->block helper
gem:
- drop DRIVER_GEM_GPUVA flag
ttm:
- be more aggressive allocating below protection limit
sched:
- add test suite for concurrent job submissions
hdmi:
- hook the color format property in helpers
mipi-dsi:
- add MIPI_DSI_MODE_DSC_ALL_SLICES_IN_PKT
bridge:
- add atomic create callbacks
- drop atomic reset
- display-connector: don't autoenable HPD IRQ
- trigger initial HPD for DP
- ti-sn65dsi83: remove NO_HFP and NO_HBP mode flags
- analogix_dp: switch to DP link training helpers
dp:
- add support for DSC max delta BPP
edid:
- parse panel type from DisplayID 2.x Display Parameters
sysfb:
- improve panel, stride, framebuffer size validation
panel:
- implement ref counting for struct drm_panel
- himax-hx83121a: add backlight regulator support
- novatek-nt36672a: Inline panel init sequences
- visionox-vtdr6130: enable DSC
- novatek-nt37801: Use mipi_dsi_*_multi() functions
- samsung-s6d16d0: Fix prepare error handling
- support Novatek NT36536 plus DT bindings
- sofef00: fix backlight updates
- osd101t2587: use mipi_dsi_*_multi interface
- panel-edp: adjust timing for AUO displays
- panel-lvds: support Opto Logic SCX1001511GGC49
- panel-simple: support Kyocera tcg070wvlq
- panel-edp: quirks
- AUO B116XAT04.3, CMN N116BCP-EA2, CSW MNB601LS1-8
- BOE NV116WH2-M30, BOE NT116WHM-N21, BOE NV116FH1-M31
- BOE NV116FH1-M30, NV140FHM-N5B, TM156VDXP25
- BOE NE160QDM-NY1, MB116AS01
- new:
- Samsung ATNA40HQ08-0, Anbernic TD4310
- Chipone ICNA35XX, Ilitek ILI9488
- Ilitek ILI7807S, Renesas R63419
- MNE001BS6-2, MNF601BS4-1, Sharp LQ120P1JX51
virtio:
- add support for save/restore virtio_gpu_objects
- abort vq wait on device removal
amdgpu:
- add color format DRM property
- initial compute pipe reset support
- add GFX 6-8 modifier support
- initial DCN 6.0.0 support
- dmemcg eviction support
- improved boundary checking for bios parsing
- RAS updates and rework
- VCN secure submission fixes
- 8K panel fix
- Display KUNIT tests
- parse panel type from DisplayID
- Align IP discovery to pci device lifetime
- SOC15 register macro cleanups
- UVD memory placement fixes
- GFX9 mode2 reset fixes
- drop unnecessary BUG/BUG_ON
- GFX8 soft reset rework
- enable soft reset on GFX8
- PSP/SMU 15.0.9 update
- VI ASPM fix
- userq fixes
- amdgpu_vm_get_task_info_pasid lifetime fix
- DC CACP support
- change system_unbound_wq with system_dfl_wq
- Loosen VFCT bios parsing to deal with pci=realloc
- SI/SMU7 AC/DC switch fix
- VM fence handling fix
- GEM close optimisation
- Apple Studio Display fixes
- DC FRL fixes
amdkfd:
- initial compute pipe reset support
- allow applications to opt out of sigbus on fatal errors
- improve CRIU boundary checks
- MQD handling rework
- move TBA/TMA from system to device memory
- avoid topology-lock in kfd_mmap
- SVM eviction fixes
radeon:
- fix unset CONFIG_ACPI build
i915:
- Novalake (NVL display version 35) timing generator enabling
- NVL DC3CO enabling
- enable UBHR link rates on thunderbolt tunnels
- Reduce Xe3+ PM demand peak bandwidth
- enable pipe DMC error interrupts for display 30+
- add kunit tests for DP link config selection
- refactor and document DP link recovery
- i915/xe driver display probe/remove/suspend/resume/shutdown cleanup
and unification
- i915/xe display runtime PM unified
- Break i915 and xe panic dependency on struct intel_framebuffer
- Streamline Pre/Post-CSC LUT loops
- drop TGL DC3DO support
- CDCLK santization
- fix HDMI scrambling enable
- fix phys bo pread/pwrite with offset
- add missing nospec on parallel submit slot
- fix some NULL derefs
xe:
- drop force_execlist module param
- gate observation streams with perf_allow_cpu
- skip FORCE_WC and vm_bound check for external dma-bufs
- dmemcg eviction support
- remove unused NVL-S GuC
- TLB invalidation improvements
- NVL-S updated PCI-IDs and w/a
- madvise: optimise invalidation path
- fix infinite gt-reset loop in timeout recovery
- update TTM device benefical_order
- wait on external BO kernel fences in exec ioctl
- add/use more KLV helpers
- sriov: disable display in admin only PF mode
- add RAS GPU health indicator
- optimise TTM populate for DONTNEED BO
- drop force_probe for NVL-s
- add debugfs for pcode info
amdxdna:
- disable device buffer export
nova:
- build nova-core/nova-drm from drivers/gpu
- export nova-core rust symbols (workaround)
- GSP boot process consolidation
- Boot GSP with vGPU enabled
- TLV firmware image format support
- Hopper/Blackwell fixes and cleanups
- I/O projection adoption
tyr:
- firmware loading and MCU boot
- add generic slot manager + MMU
- GPU VM support ARM64 LPAE page tables
- add kernel buffer object for internal allocations
- add parser for Mali CSF
- add MCU booting
nouveau:
- race fixes
- check instmem iomapping at first use
- add dmemcg support
- expose NVDEC channels
- add scanline position/head state support for GSP
qxl:
- convert simple encoder to regular
ethosu:
- add perf counter support
etnaviv:
- force flush on power register ops
msm:
- support DSC configuration with slice_per_pkt > 1
mxsfb:
- fix disable sequence
panthor:
- support sparse mappings
rockchip:
- switch away from simple helpers
- support YUV background color
- fix layer config timeout
- add edp support for rk3576
- add batch command submission function
rocket:
- error handling and NULL ptr deref fixes
sun4i:
- switch away from simple helpers
imagination:
- mark BXM-4-64 MC1 as support
host1x:
- support tegra264
tegra:
- add DSI for tegra 20/30
v3d:
- reduce PM runtime autosuspend delay
- scheduler fixes and refactoring
- deprecate v3d 3.3 and 4.1
- validate CPU job query boundaries
hibmc:
- improve plane format handling
- switch to gem shmem
mediatek:
- cec: correct compat for mt7623-8167?
exynos:
- remove simple dependency
- add error handling to encoder paths
- take i2c adapter module reference"
* tag 'drm-next-2026-08-20' of https://gitlab.freedesktop.org/drm/kernel: (2074 commits)
drm/xe/mcr: Take vcs1/vecs1 into account for first media slice
drm/xe: Fix a bug in pc_adjust_freq_bounds()
drm/xe: Fix xe_device_probe() failure
drm/xe/drm_ras: Move has_drm_ras check to drm_ras layer
drm/xe/ras: Fix boot-time ras error processing
drm/amd/display: make DC_RUN_WITH_PREEMPTION_ENABLED misuse a build error
drm/amd/pm: silence uninitialized variable warnings
drm/amdgpu: skip BOs being torn down during GTT recovery
drm/amdgpu: Reject UVD message with invalid number of h265 refs
drm/amdgpu: keep PRT mappings off the vm_bo state lists
drm/amdgpu: fix nbif 6.3.1 l1 low power not functional
drm/amd/display: fix BT.2020 YCbCr output CSC matrices for DCE
drm/amd/display: fix BT.2020 YCbCr limited output CSC matrix
drm/amdgpu: Implement insert_end for VCE 3
drm/amdgpu: Fix UVD min buffer sizes
drm/amdgpu: Fix UVD decode image min size calculation
drm/amdgpu: Fix UVD dpb min size calculation for H264
drm/amdgpu: Reject UVD message with dimensions above 4096
drm/amdgpu: check ASPM on the dGPU host link
drm/radeon: fix autosuspend cleanup during teardown
...
|
|
Pull bitmap updates from Yury Norov:
"The usual set of fixes, cleanups and performance improvements together
with a couple of new tests:
- bitmap_find_next_zero_area_off() optimization (Sunyi)
- bitmap_find_next_zero_area_off(): return size when no zero area is
found (Yury)
- bitmap vs IDA vs Maple Tree performance test (Yury)
- get rid of cpumap_print_to_pagebuf() (Yury)
- use nr_node_ids in __nodemask_pr_numnodes() (Li RongQing)
- bitops: make the *_bit_le functions use unsigned long (Benjamin)
- bitmap scatter & gather test fix (Christophe)
- use __ASSEMBLER__ in bitmap header files (Thomas)"
* tag 'bitmap-for-7.3' of https://github.com/norov/linux: (25 commits)
lib: test bitmap vs IDA vs Maple Tree performance for region allocations
bitmap: Return size when no zero area is found
media: s5p-mfc: Treat bitmap size as allocation failure
crypto: ccp: Treat bitmap size as allocation failure
powerpc/msi: Treat bitmap size as allocation failure
ARM: dma-mapping: Treat bitmap size as allocation failure
bitmap: drop bitmap_next_set_region()
nodemask: reduce bitmap width to nr_node_ids in __nodemask_pr_numnodes()
bitmap: Properly initialise destination bitmap for scatter & gather test
lib/bitmap-str: get rid of cpumap_print_to_pagebuf()
perf: Use sysfs_emit() for cpumask show callbacks
PCI/sysfs: Use sysfs_emit() for cpumask show callbacks
RDMA/hfi1: Use sysfs_emit() for cpumask show helper
hwtracing: hisi_ptt: Use sysfs_emit() for cpumask show
fpga: dfl-fme-perf: Use sysfs_emit() for cpumask show
devfreq: Use sysfs_emit() for cpumask show callbacks
cpu: Use sysfs_emit() for cpumask show callback
x86/events: Use sysfs_emit() for cpumask show callbacks
powerpc: Use sysfs_emit() for cpumask show callbacks
arm: Use sysfs_emit() for cpumask show callbacks
...
|
|
map_properties() remaps the Apple properties setup_data payload
and then reads the properties header fields.
Reject a truncated payload before checking the header version and length
fields.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
When __efi_queue_work() times out it disables runtime services and
returns, but the kworker is still blocked inside firmware. If the
firmware eventually unblocks, efi_call_rts() would run its tail on an
efi_rts_work that the timed-out caller has long abandoned: signalling a
stale completion and clearing efi_runtime_lock_owner that may by then
belong to another caller.
If runtime services have been disabled by the time the call returns,
park the worker with efi_rts_park_worker() instead, so it never touches
efi_rts_work again or returns to the workqueue.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Three wrappers call firmware directly instead of going through
__efi_queue_work(), and none of them check whether runtime services are
still enabled: virt_efi_set_variable_nb(),
virt_efi_query_variable_info_nb() and virt_efi_reset_system(). Once a
hang has cleared EFI_RUNTIME_SERVICES - or efi_recover_from_page_fault()
has cleared it on a firmware page fault - these paths still enter the
(possibly wedged) firmware, e.g. an EFI pstore write through the
non-blocking SetVariable() variant, in violation of UEFI's
non-reentrancy rules. reset_system() is reachable too: efi_reboot()
only gates it on the static efi_rt_services_supported() mask, which does
not track the runtime disable.
Check efi_enabled(EFI_RUNTIME_SERVICES) in each before calling into
firmware. Test it after taking efi_runtime_lock rather than before: the
bit is only ever cleared at runtime while that lock is held, so checking
it under the lock avoids racing with a concurrent timeout that clears the
bit and drops the lock.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
When an EFI runtime service hangs in firmware, the efi_rts_wq worker is
stuck inside the call and cannot be cancelled. __efi_queue_work() then
waits on the completion forever while holding efi_runtime_lock, so every
later EFI caller is wedged until reboot; the only symptom is a "workqueue
lockup" and tasks piling up on the semaphore.
Replace wait_for_completion() with wait_for_completion_timeout() bounded
by EFI_RTS_TIMEOUT (120 seconds). On timeout, clear EFI_RUNTIME_SERVICES
and return EFI_ABORTED so later callers fail fast at the entry check
instead of each paying another 120 seconds. The wedged worker is
intentionally leaked and keeps ownership of efi_rts_work.
A worker that only starts running after the timeout would otherwise
dereference efi_rts_work.args, now pointing into the caller's freed stack
frame, and hand stale pointers to firmware. Park it with
efi_rts_park_worker() at the entry of efi_call_rts() when runtime
services are already disabled, before it touches args or enters firmware.
Known limitation: a worker already inside firmware when the timeout fires
still holds efi_rts_args pointing into the caller's stack frame; if
firmware unblocks afterwards and writes the output buffers, they land in
reused memory. Firmware hung this long rarely recovers; a follow-up could
bounce the buffers through kmalloc.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Move the EFI_RUNTIME_SERVICES check to the top of __efi_queue_work() and
return directly, so a caller that finds runtime services disabled returns
without touching the shared efi_rts_work. No functional change.
This prepares for bounding the wait, where a timeout will clear
EFI_RUNTIME_SERVICES while the leaked worker still owns efi_rts_work; a
later caller must then bail out before reinitialising it.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Convert the queue_work() failure path in __efi_queue_work() to a
goto exit instead of falling through to the wait and the
WARN_ON_ONCE(status == EFI_ABORTED) below it. A failed queue_work()
leaves the status at its initial EFI_ABORTED, so that warning would
fire even though no call ran; it is meant for a completed call that
returned EFI_ABORTED.
No change for the common (successful enqueue) path. This also prepares
__efi_queue_work() for the timeout handling added later.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
x86's efi_crash_gracefully_on_page_fault() ends in an infinite
schedule() loop so the kworker that faulted in firmware never runs
efi_rts_wq again. A later change needs the same "park this worker
forever" primitive on the runtime service timeout path, so factor the
loop into a shared efi_rts_park_worker() and call it from the x86
page-fault handler.
No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Linux 7.2
There was a lot of conflicts this round between fixes and next,
and I'd like to get the merge resolutions that we have in drm-tip.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a fairly busy development cycle - the changes spread over from
the core side to leaf drivers, with lots of cleanups and enhancements.
Here we go, some highlights:
ALSA core:
- Extension of ALSA control component list ABI
- Locking optimization and RCU conversion of ALSA sequencer core
- A few hardening fixes for UMP and sequencer core
- Drop __bitwise and __force prefix from UAPI definitions
ASoC:
- Automatic DAI format selection code deployment across many drivers
- Sorting of register default tables to prevent ordering issues in
many drivers
- Lots of code cleanups and refactoring
- Updates in Qualcomm driver stack
- New platforms: AMD ACP7.B/F, Cirrus Logic CS35L62, Loongson
2K0300, Meson GX, Qualcomm LPI MI2S, SM8475, WSA855X, Realtek
RT1321 VA1/2 and RT766/7
HD-audio:
- Support for AW88399 HD-audio side codec for Lenovo Legion laptops
- Support for Hygon and Lisuan HDMI controllers
- Robustness fixes for wild device binding
- Lots of quirks/fixups: Realtek and Conexant codecs for ASUS,
Lenovo, Acer, etc
USB-audio:
- Support for Pioneer DJ DJM-S11
- Scarlett2/FCP private URB notification fixes
- Extended quirk_flags to 64bit
- Hardening fixes for 6fire, bcd2000, usx2y
- Device-specific quirks for Mackie, Valeton, SPACETOUCH
General:
- Auto-cleanup for put_device() and firmware loading across multiple
platforms"
* tag 'sound-7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (791 commits)
ALSA: hda: Fix connection list comparison in proc output
ALSA: docs: fix dead link to Intel HD-audio spec
ALSA: usb-audio: Add delay quirk for SPACETOUCH USB Audio
ALSA: hda: Add Lisuan HDMI controller and codec support
ALSA: hda/realtek: Fix Lenovo Yoga Slim 7 14AKP10 quirk ordering
ALSA: hda/tas2781: Add hardware stabilization delay during firmware load retries
ALSA: hda/realtek: Fix mute LED for HP Victus 15-fa1xxx (MB 8C3F)
ALSA: hda/realtek: Add micmute LED quirk for Acer Aspire A515-57
ASoC: tas2783-sdw: do not treat read-only Controls as writable
ASoC: SOF: validate topology volume range before allocation
ASoC: cs35l56: Use IRQ provided by the SoundWire core
soundwire: bus_type: Create IRQ mapping before calling driver probe()
ASoC: cs35l56: Move cs35l56_irq_request() after cs35l56_irq()
ASoC: cs35l56: Request IRQ in cs35l56_common_probe()
ALSA: core: Fix use-after-free in snd_card_do_free()
ALSA: hda/realtek: Drop duplicate quirk for Lenovo 0x17aa:0x38df
ALSA: usb-audio: Rename the Audient iD14 monitor mix volume control
ASoC: tas2781: Refactor calibration start kcontrol creation to separate helper
ASoC: dt-bindings: es8316: Fix supply property constraints
ALSA: seq: midi: Serialize input teardown with event_input
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform firmware updates from Tzung-Bi Shih:
"Fixes:
- Don't map no-map memory regions for CBMEM entries
- Check bound of coreboot table entries
Cleanups:
- Fix typo in docs"
* tag 'chrome-platform-firmware-v7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
firmware: coreboot: Validate table bounds
firmware: coreboot: Skip no-map CBMEM entries
docs: ABI: testing: Fix typo
|
|
Pull ARM SoC platform updates from Arnd Bergmann:
"The 32-bit Arm platforms are a bit more interesting this time: I
refreshed an earlier series to mark code as deprecated that does have
the tendency of getting in the way of cleanups and new features but
has close to zero users. Among these are:
- 22 of the remaining 28 legacy board files that predate the current
devicetree based descriptions, using old chips from Intel and
Marvell. The remaining six board files are for TI OMAP1 and Samsung
s3c64xx chips and all still have known users.
- support for Cortex-M3/M4/M7 and ARM1136r0 CPU cores and the 25
machines based on these. These all use devicetree but the CPU
support causes disproportional work. Most of them are just
reference boards, the notable exceptions being the Nokia N800/N810
tablet and the Buglabs BUG platform.
- be8, be32, oabi and iwmmxt userspace binaries, which were mostly
associated with the platforms now scheduled for removal and are
increasingly problematic to support with modern toolchains.
Nothing is actually removed at this point, to ensure that any
remaining users continue to have the 7.3-LTS for a while longer.
Patches for removal are currently being tested.
Other updates include a continued work to convert GPIO number based
interfaces to descriptors, a patch to restore little-endian mode on
the one Arm platform (ixp4xx) that only worked in big-endian mode
recently, and some minor cleanups and bugfixes"
* tag 'soc-arm-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
MAINTAINERS: Drop redundant lists from various Samsung entries
ARM: tegra: Replace __ASSEMBLY__ with __ASSEMBLER__
ARM: tegra: Fix OF node reference leaks in IRQ init
ARM: lpc32xx: remove a few manually populated OF devices
ARM: lpc32xx: only run SoC init on LPC32xx hardware
firmware: imx: scu: manage mailbox channels and global handle
ARM: sa1100: h3xxx: convert gpio-keys to use software nodes
ARM: sa1100: collie: convert gpio-keys to use software nodes
ARM: sa1100: assabet: convert gpio-keys to use software nodes
gpio: sa1100: register software node for GPIO controller
ARM: ixp4xx: Relax endianness
ARM: replace linux/gpio.h inclusions
soc: imx9: devm_kasprintf error handling
ARM: mark mv78xx0 support as deprecated
ARM: mark axxia platform as deprecated
ARM: mark Cortex-M3/M4/M7 based boards as deprecated
ARM: mark footbridge as deprecated
ARM: mark RiscPC as deprecated
ARM: mark mach-sa1100 as deprecated
ARM: orion5x: mark all board files as deprecated
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and
cleanups, that are to a large part the result of automated testing.
On platform specific drivers, this includes SoC specific code for
xilinx, freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung,
rockchip, renesas, ixp4xx. In firmware drivers, we see a similar
picture for SCMI and qcomtee.
Aside from these, we see actual new hardware support in a few areas:
- The Apple platform gets a new driver for low power states
- Updates to Qualcomm platform drivers add several new hardware
specific features and additional SoCs.
- Amlogic SoC support for A1 and T7 is added
- The Mediatek MMSYS driver is refactored as a cleanup"
* tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (157 commits)
soc: qcom: make QCOM_PDR_MSG selectable
soc: qcom: ubwc: Fix missing include
soc: qcom: ubwc: Fix link error when QCOM_SMEM=n
media: iris: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDM 850
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a reasonable amount of stuff here, including a bunch of
updates to the perf PMU drivers and some MPAM updates to expose the
memory bandwidth counters via resctrl.
On the architecture side, some highlights include support for BBML3
and steps towards support for an architectural NMI solution, all
wrapped up in a web of fixes for latent issues identified by Sashiko.
ACPI:
- Combine reads of AMU counters into a single FFH feedback counter op
Confidential computing:
- Fix smp_processor_id() in preemptible context when retrieving an
attestation token inside a realm
- Convert pKVM over to a "CC platform"
- Clean-up our SWIOTLB configuration in preparation for reworking the
handling of encrypted/decryped DMA buffers in the dma-mapping tree
CPU errata handling:
- Work around broken device memory ordering on NVIDIA Olympus cores
- Fix broken 'nospectre_bhb' command-line option
- Select the idle loop backend instruction on the command-line
CPU features:
- Replace our BBML2-noabort feature with the new architectural BBML3
feature
- Disable in-kernel BTI for recent versions of Clang due to issues
with livepatch that are still being investigated
- Clean-up documentation describing which ID register fields are
exposed to userspace
Interrupts:
- Preliminary work towards supporting FEAT_NMI, which cleans up our
IRQ entry code and fixes some latent issues with pseudo-NMI
- Support for an SDEI backend to trigger an NMI backtrace
Memory management:
- Treat all devices as coherent when CLIDR_EL1.LoC == 0
- Fix no-map handling of sub-page-sized regions
- Second attempt at unmapping the linear aliases of the kernel data
and bss sections
- Fix EFI runtime calls when software-PAN is enabled
Miscellaneous:
- Add Mark Rutland as a reviewer!
- Tidy-up our futex cmpxchg logic when using the new LSUI
instructions
- Drop the requirement on DYNAMIC_FTRACE_WITH_CALL_OPS when
selecting HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS
- Fix a false-positive KCSCAN splat in the delay loop
- Use a portable typedef for 128-bit scalar types in our UAPI headers
- Non-critical fixes for Sashiko reports all over
MPAM:
- Hook MPAM memory bandwidth counters into resctrl's counter
assignment interface
- Fix a quirk in the MPAM bandwidth counting on Nvidia T241 so that
it also applies to 63 bit counters
Perf:
- Workarounds for hardware issues in the CMN-S3 PMU (Graviton 5) and
CPU PMU (NVIDIA Olympus again!)
- Add support for the DDR PMU on Marvell CN20K SoCs
- Add support for Picoheart implementations of the DCW PCIe PMU
- Add support for Channel/Rank/Bank filtering in the CXL PMU driver
- Add support for 64-bit counters in the CSPMU device
- Add support for revision 2 of the CMN S3 PMU
Ptrace:
- Fix a decade-old bug in our handling of seccomp and tracing on
syscall entry
- Fix regset handling for inactive SVE and SSVE registers
Selftests
- Add some tests for the decade-old bug that we just tried to fix in
our syscall entry path
- Fix SVE test crash on SME-only CPUs"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (95 commits)
arm64/efi: Avoid voluntary preemption with efi_mm installed
arm64: bti: Disable in-kernel BTI with recent versions of Clang
arm64: entry: Avoid unnecessary local_irq_disable() on kernel exit
irqchip/gic-v3: make the unmasking of pseudo-NMIs explicit when handling IRQs
arm64: Disable KCSAN instrumentation in delay.o
arm_mpam: Disable driver unbind to avoid UAF
arm_mpam: Fix a NULL pointer dereference on unbinding after an error interrupt
perf: arm_pmuv3: Zero initialize hw_id branch stack field
arm64: mm: Unmap kernel data/bss entirely from the linear map
iommu/arm-smmu-v3-sva: Use system_supports_bbml3() to detect CPU feature
perf/arm-cmn: Support CMN S3 r2
perf/arm-cmn: Plumb in new filter types
perf/arm-cmn: Refactor event filter data
perf/arm-cmn: Refactor event filter programming
perf/arm-cmn: Rename filter variables for clarity
arm64: mm: fix accidental linear mapping of no-map reserved memory
tools: Ensure tools copy of linux/filter.h exports the UAPI
kselftest/arm64: Fix abi test compilation errors
arch: arm64: add early_param idle=<wfi|yield|nop>
arm64: entry: mask DAIF before returning from C EL1 handlers
...
|
|
soc/drivers
arm64: Xilinx SOC changes for 7.3
firmware:
- Feature check improvements
- Clean up firmware and EL3 state on kexec
soc:
- Remove redundant dev_err()
* tag 'zynqmp-soc-for-7.3' of https://github.com/Xilinx/linux-xlnx:
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
soc: xilinx: Remove redundant dev_err()
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
More Qualcomm driver updates for v7.3
Add SMEM parsing for DDR configuration data and use its highest bank
address bit to select the appropriate UBWC configuration.
Enable generic PAS trusted-zone APIs for the Iris and Venus media drivers.
Fix SCM probe retry state, reserved-memory cleanup, and an early IRQ-handler
NULL dereference. Enable QSEECOM EFI variable access on the Asus Zenbook A16.
Correct GENI firmware-size validation using the hardware CFG RAM depth and
correct the PMIC GLINK Thunderbolt extradata layout.
Document the Nord AOSS side channel and the IMEM minidump SRAM property.
Clean up Qualcomm statistics macros and the WCNSS binding schema.
* tag 'qcom-drivers-for-7.3-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
media: qcom: Switch to generic PAS TZ APIs
dt-bindings: soc: qcom,aoss-qmp: Document Nord AOSS side channel
dt-bindings: sram: qcom,imem: Add minidump-sram pattern property
soc: qcom: qcom_stats: Replace CLIENT_VOTES_OFFSET macro with sizeof()
soc: qcom: qcom_stats: Remove unused macro definitions
soc: qcom: ubwc: Get HBB from SMEM
soc: qcom: smem: Expose DDR data from SMEM
soc: qcom: smem: Use 'unsigned int' instead of 'unsigned'
firmware: qcom: scm: Fix tzmem state on probe retry
firmware: qcom: scm: Fix reserved memory cleanup on probe failure
firmware: qcom: scm: Fix NULL dereference in IRQ handler before __scm is published
firmware: qcom: scm: Allow QSEECOM on Asus Zenbook A16 (UX3607OA)
soc: qcom: geni-se: Use HW PROG_RAM_DEPTH to validate firmware size
soc: qcom: pmic_glink_altmode: Define the TBT extradata properly
dt-bindings: soc: qcom,wcnss: Drop redundant $ref of firmware-name property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v7.3
Minor bug fixes and cleanups across TI SoC and firmware drivers:
- firmware: ti_sci: Fix a resource leak by undoing list publication when
device populate fails, ensuring proper cleanup on error paths
- soc: ti: knav_qmss: Remove debugfs file on teardown to avoid stale
entries and potential use-after-free scenarios
- soc: ti: wkup_m3_ipc: Remove redundant dev_err() call to avoid
duplicate error reporting
* tag 'ti-driver-soc-for-v7.3' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
soc: ti: wkup_m3_ipc: Remove redundant dev_err()
soc: ti: knav_qmss: Remove debugfs file on teardown
firmware: ti_sci: Undo list publication on populate failure
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
During a kexec restart, only the kernel is reloaded but notifier callbacks
in firmware persist, causing state mismatches between kernel and firmware.
To address this, introduce PM_ALL_NOTIFIERS node ID to unregister all
notifier callbacks during kexec. On a graceful kexec restart, this occurs
in zynqmp_firmware_shutdown(). On a crash kernel restart, it happens in
zynqmp_firmware_probe() in the reloaded kernel.
Unregistering all notifiers depends on firmware support for the
PM_ALL_NOTIFIERS node ID. On firmware that does not implement it (the
feature check reports a version below PM_API_VERSION_3) the step is
skipped and a warning such as "Firmware doesn't support unregister all
notifiers at once" is logged, e.g. on Versal NET firmware that predates
this API.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Link: https://patch.msgid.link/20260729122522.3732875-4-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
During a kexec restart, only the kernel is reloaded while devices
allocated in firmware persist, causing state mismatches between the
kernel and firmware.
Introduce PM_DEV_ALL_PERIPH node ID (0x18224FFFU) to release all
peripheral devices during kexec. On graceful restarts, this happens in
zynqmp_firmware_shutdown(). On crash kernel restarts, it happens in
zynqmp_firmware_probe() of the reloaded kernel.
Releasing all peripherals depends on firmware support for the
PM_DEV_ALL_PERIPH node ID. On firmware that does not implement it (the
feature check reports a version below PM_API_VERSION_3) the release is
skipped and a warning such as "Bulk device release is not supported by
firmware" is logged, e.g. on Versal NET firmware that predates this API.
Signed-off-by: Jay Buddhabhatti <jay.buddhabhatti@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Prasanna Kumar T S M <ptsm@linux.microsoft.com>
Link: https://patch.msgid.link/20260729122522.3732875-3-jay.buddhabhatti@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
|
|
Currently, during a kexec restart, only the kernel is reloaded, while
EL3-specific data remain unchanged. This leads to a mismatch betw |
