| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The driver returned an error in the probe function when a usb c
connector is configured in the DT without a "typec-power-opmode"
property. This property is used to initialize the CURRENT_MODE_ADVERTISE
register of the TUSB320, which is unused when operating as a UFP.
Requiring this property causes unnecessary configuration overhead and
inconsistency with the USB connector DT bindings, which do not specify
it as required.
This change makes typec-power-opmode optional. When the property is not
present, the driver will skip programming the CURRENT_MODE_ADVERTISE
register and rely on the hardware default.
Signed-off-by: Yannis Bolliger <yannis.bolliger@protonmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/aPKZJ6WTZlhSOyST@yaene-desktop/
|
|
Since the PTN5150 is a Type-C chip, it's common to describe related
properties under the connector node. To align with this, the port
node will be located under the connector node in the future.
To support this layout, retrieve the USB role switch using the
connector's fwnode. For compatibility with existing device trees,
keep the usb_role_switch_get() function.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/20250926025309.24267-3-xu.yang_2@nxp.com/
|
|
PTN5150 is able to detect CC polarity. The field[1:0] of CC status
register (04H) will keep the result.
00: Cable Not Attached
01: CC1 is connected (normal orientation)
10: CC2 is connected (reversed orientation)
11: Reserved
Add orientation switch support to correctly set orientation of
multiplexer according to CC status.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/20250926025309.24267-2-xu.yang_2@nxp.com/
|
|
With current extcon_dev_unregister() timing, ida_free is before
device_unregister(), that may cause current id re-alloc to another
device in extcon_dev_register() context but sysfs filename path not
removal completed yet.
The right timing shows below:
on extcon_dev_register: ida_alloc() -> device_register()
on extcon_dev_unregister: device_unregister() -> ida_free()
stack information when an error occurs:
sysfs: cannot create duplicate filename '/class/extcon/extcon1'
Call trace:
sysfs_warn_dup+0x68/0x88
sysfs_do_create_link_sd+0x94/0xdc
sysfs_create_link+0x30/0x48
device_add_class_symlinks+0xb4/0x12c
device_add+0x1e0/0x48c
device_register+0x20/0x34
extcon_dev_register+0x3b8/0x5c4
Fixes: 7bba9e81a6fb ("extcon: Use unique number for the extcon device ID")
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Wu <michael@allwinnertech.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/20251024024946.16618-1-michael@allwinnertech.com/
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
system_wq should be the per-cpu workqueue, yet in this name nothing makes
that clear, so replace system_wq with system_percpu_wq.
The old wq (system_wq) will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/20251104110105.116858-1-marco.crivellari@suse.com/
|
|
When the system is suspended and ptn5150 wakeup interrupt is disabled,
any changes on ptn5150 will only be record in interrupt status
registers and won't fire an IRQ since its trigger type is falling
edge. So the HW interrupt line will keep at low state and any further
changes won't trigger IRQ anymore. To fix it, this will schedule a
work to check whether any IRQ are pending and handle it accordingly.
Fixes: 4ed754de2d66 ("extcon: Add support for ptn5150 extcon driver")
Cc: stable@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/20251115025905.1395347-1-xu.yang_2@nxp.com/
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Make EXTCON_MAX14526 depend on I2C to address a kconfig warning and
subsequent build errors:
WARNING: unmet direct dependencies detected for REGMAP_I2C
Depends on [m]: I2C [=m]
Selected by [y]:
- EXTCON_MAX14526 [=y] && EXTCON [=y]
ld: vmlinux.o: in function `max14526_driver_init':
extcon-max14526.c:(.init.text+0x77b0e): undefined reference to `i2c_register_driver'
ld: vmlinux.o: in function `max14526_driver_exit':
extcon-max14526.c:(.exit.text+0x467c): undefined reference to `i2c_del_driver'
Fixes: 145af3ddd1cd ("extcon: Add basic support for Maxim MAX14526 MUIC")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/20250515234803.1385375-1-rdunlap@infradead.org/
|
|
SIMPLE_PM_DEV_OPS() is deprecated according to <linux/pm.h>.
Use DEFINE_SIMPLE_PM_DEV_OPS() instead. This avoids a build warning
when CONFIG_PM is not enabled:
drivers/extcon/extcon-max14526.c:265:12: warning: ‘max14526_resume’ defined but not used [-Wunused-function]
265 | static int max14526_resume(struct device *dev)
Fixes: 145af3ddd1cd ("extcon: Add basic support for Maxim MAX14526 MUIC")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/lkml/20250513210252.1139749-1-rdunlap@infradead.org/
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The MAX14526 is designed to simplify interface requirements on portable
devices by multiplexing common inputs (USB, UART, Microphone, Stereo Audio
and Composite Video) on a single micro/mini USB connector. The USB input
supports Hi-Speed USB and the audio/video inputs feature negative rail
signal operation allowing simple DC coupled accessories. These device allow
a single micro/mini USB port to support all the common interfaces on
Cellular phones and portable media players over the same external lines.
Link: https://lore.kernel.org/lkml/20250506073216.43059-3-clamor95@gmail.com/
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Driver in the probe enables wakeup source conditionally, so the cleanup
path should do the same - do not release the wakeup source memory if it
was not allocated.
Link: https://lore.kernel.org/lkml/20250509071703.39442-2-krzysztof.kozlowski@linaro.org/
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Closes: https://lore.kernel.org/r/22aaebb7-553b-4571-8a43-58a523241082@wanadoo.fr/
Fixes: 78b6a991eb6c ("extcon: adc-jack: Fix wakeup source leaks on device unbind")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Link: https://lore.kernel.org/lkml/20250501-device-wakeup-leak-extcon-v2-4-7af77802cbea@linaro.org/
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Link: https://lore.kernel.org/lkml/20250501-device-wakeup-leak-extcon-v2-3-7af77802cbea@linaro.org/
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source.
Link: https://lore.kernel.org/lkml/20250501-device-wakeup-leak-extcon-v2-2-7af77802cbea@linaro.org/
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Device can be unbound, so driver must also release memory for the wakeup
source. Do not use devm interface, because it would change the order of
cleanup.
Link: https://lore.kernel.org/lkml/20250501-device-wakeup-leak-extcon-v2-1-7af77802cbea@linaro.org/
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Pull extcon updates from Chanwoo:
Update extcon next for v6.14
Detailed description for this pull request:
- Fix null pointer check of memory allocation on extcon-rtk-type-c.c.
- Add EXTCON subsystem documentation including the detailed description/example.
- Drop unneeded init of struct i2c_device_id:driver_data on extcon-fsa9480/pth5150.c.
* tag 'extcon-next-for-6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: Drop explicit initialization of struct i2c_device_id::driver_data to 0
Documentation: extcon: add documentation for Extcon subsystem
extcon: realtek: fix NULL deref check in extcon_rtk_type_c_probe
|
|
These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.
This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.
Link: https://lore.kernel.org/lkml/20240918123150.1540161-6-u.kleine-koenig@baylibre.com/
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
In extcon_rtk_type_c_probe() devm_kzalloc() may return NULL but this
returned value is not checked.
Fixes: 8a590d7371f0 ("extcon: add Realtek DHC RTD SoC Type-C driver")
Link: https://lore.kernel.org/lkml/20241025094650.253599-1-hanchunchao@inspur.com/
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The continual trickle of small conversion patches is grating on me, and
is really not helping. Just get rid of the 'remove_new' member
function, which is just an alias for the plain 'remove', and had a
comment to that effect:
/*
* .remove_new() is a relic from a prototype conversion of .remove().
* New drivers are supposed to implement .remove(). Once all drivers are
* converted to not use .remove_new any more, it will be dropped.
*/
This was just a tree-wide 'sed' script that replaced '.remove_new' with
'.remove', with some care taken to turn a subsequent tab into two tabs
to make things line up.
I did do some minimal manual whitespace adjustment for places that used
spaces to line things up.
Then I just removed the old (sic) .remove_new member function, and this
is the end result. No more unnecessary conversion noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the "big" set of char/misc and other driver subsystem changes
for 6.12-rc1.
Lots of changes in here, primarily dominated by the usual IIO driver
updates and additions, but there are also small driver subsystem
updates all over the place. Included in here are:
- lots and lots of new IIO drivers and updates to existing ones
- interconnect subsystem updates and new drivers
- nvmem subsystem updates and new drivers
- mhi driver updates
- power supply subsystem updates
- kobj_type const work for many different small subsystems
- comedi driver fix
- coresight subsystem and driver updates
- fpga subsystem improvements
- slimbus fixups
- binder new feature addition for "frozen" notifications
- lots and lots of other small driver updates and cleanups
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
greybus: gb-beagleplay: Add firmware upload API
arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
MAINTAINERS: Update path for U-Boot environment variables YAML
nvmem: layouts: add U-Boot env layout
comedi: ni_routing: tools: Check when the file could not be opened
ocxl: Remove the unused declarations in headr file
hpet: Fix the wrong format specifier
uio: Constify struct kobj_type
cxl: Constify struct kobj_type
binder: modify the comment for binder_proc_unlock
iio: adc: axp20x_adc: add support for AXP717 ADC
dt-bindings: iio: adc: Add AXP717 compatible
iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
tools: iio: rm .*.cmd when make clean
iio: adc: standardize on formatting for id match tables
iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"Power-supply core:
- introduce power_supply_show_enum_with_available() helper
- change usb_types from an array into a bitmask
- fix early usage of power_supply_property_is_writeable() resulting
in sysfs files not being writable
- fix missing temp1_max_alarm attribute in power-supply's hwmon
devices
Drivers:
- max1720x: expose nvmem device
- brcmstb: cleanup driver to use latest APIs
- max77693: expose input and charging current limit
- max17042_battery: fix state of charge reading for devices without
current sensing
- axp20x_battery: add AXP717 support
- axp20x_battery: fix min/max voltage properties
- axp20x_usb_power: add AXP717 support
- axp20x_usb_power: add DT based input current limit
Documentation updates
Misc minor cleanups and fixes"
* tag 'for-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (38 commits)
power: supply: hwmon: Fix missing temp1_max_alarm attribute
power: supply: Drop use_cnt check from power_supply_property_is_writeable()
power: supply: ab8500: Constify struct kobj_type
power: supply: max1720x: fix a double free on error in probe()
power: supply: axp20x_battery: add support for AXP717
power: supply: axp20x_usb_power: Add support for AXP717
dt-bindings: power: supply: axp20x: Add AXP717 compatible
dt-bindings: power: supply: axp20x: Add AXP717 compatible
power: supply: axp20x_usb_power: Fix spelling mistake "reqested" -> "requested"
power: supply: Change usb_types from an array into a bitmask
power: supply: sysfs: Move power_supply_show_enum_with_available() up
power: supply: sysfs: Add power_supply_show_enum_with_available() helper
power: supply: rt9467-charger: Remove "usb_type" property write support
power: supply: ucs1002: Adjust ucs1002_set_usb_type() to accept string values
power: supply: "usb_type" property may be written to
power: supply: max1720x: add read support for nvmem
mfd: axp20x: Add ADC, BAT, and USB cells for AXP717
power: supply: core: constify psy_tzd_ops
power: reset: brcmstb: Do not go into infinite loop if reset fails
power: reset: brcmstb: Use devm_register_sys_off_handler()
...
|
|
commit 364ea7ccaef9("power: supply: Change usb_types from an array into a
bitmask") changes usb_types from an array into a bitmask. Fix the build error of
usb_types variables.
Link: https://lore.kernel.org/lkml/20240904164325.48386-1-chanwoo@kernel.org/
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240903173443.7962-2-tony.luck@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply into extcon-next
Immutable branch for usb_types change for v6.12
Changing usb_types type from array to bitmap in the power_supply_desc
struct requires updating power-supply drivers living in different
subsystem, so it is handled via an immutable branch.
|
|
Add a new driver for the ON Semiconductor LC824206XA microUSB switch and
accessory detector chip.
ON Semiconductor has an "Advance Information" datasheet available
(ENA2222-D.PDF), but no full datasheet. So there is no documentation
available for the registers.
This driver is based on the register info from the extcon-fsa9285.c driver,
from the Lollipop Android sources for the Lenovo Yoga Tablet 2 (Pro)
830 / 1050 / 1380 models. Note despite the name this is actually a driver
for the LC824206XA not the FSA9285.
This has only been tested on a Lenovo Yoga Tablet 2 Pro 1380 and
using the driver on other setups may require additional work.
So far this driver is only used on x86/ACPI (non devicetree) devs.
Therefor there is no devicetree bindings documentation for this driver's
"onnn,enable-miclr-for-dcp" property since this is not used in actual
devicetree files and the dt bindings maintainers have requested properties
with no actual dt users to _not_ be added to the dt bindings.
Link: https://lore.kernel.org/lkml/20240512204019.58121-1-hdegoede@redhat.com/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The bit_types array just hold a list of valid enum power_supply_usb_type
values which map to 0 - 9. This can easily be represented as a bitmap.
This reduces the size of struct power_supply_desc and further reduces
the data section size by drivers no longer needing to store the array.
This also unifies how usb_types are handled with charge_behaviours,
which allows power_supply_show_usb_type() to be removed.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240831142039.28830-7-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
This patch adds kernel-doc comments for the previously undocumented
members `dev` and `wakeup_source` in the struct adc_jack_data in
adc-jack device driver.
Link: https://lore.kernel.org/lkml/20240426100054.61506-1-yang.lee@linux.alibaba.com/
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Link: https://lore.kernel.org/lkml/20240304174913.1198974-1-andriy.shevchenko@linux.intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/lkml/52d0a4317d5372f1135259d4fbbd2822b86ba8f4.1708876186.git.u.kleine-koenig@pengutronix.de/
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/lkml/8914cd71b32e1f6298e65b84fb84370c73b4fe37.1708876186.git.u.kleine-koenig@pengutronix.de/
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/lkml/30097beba928bf2073645f85d21fb9c1aee64991.1708876186.git.u.kleine-koenig@pengutronix.de/
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/lkml/2c017ea490f721646bd472e7d427eb377e4e8423.1708876186.git.u.kleine-koenig@pengutronix.de/
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/lkml/7223e19152980ef553e38cf56c2b38ec099586e0.1708876186.git.u.kleine-koenig@pengutronix.de/
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Link: https://lore.kernel.org/lkml/87f0b8f158565cb9ea68b42db2bb018f82a7ee27.1708876186.git.u.kleine-koenig@pengutronix.de/
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
LinkL: https://lore.kernel.org/lkml/14d30788ecd288b1b0983a8ea224499bbaa5de19.1708876186.git.u.kleine-koenig@pengutronix.de/
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Don't shadow error from devm_extcon_dev_allocate() and return it as is.
Link: https://lore.kernel.org/lkml/20231222161854.2955859-1-andriy.shevchenko@linux.intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
IRQ_DOMAIN is a hidden (not user visible) symbol. Users cannot set
it directly thru "make *config", so drivers should select it instead
of depending on it if they need it.
Relying on it being set for a dependency is risky.
Consistently using "select" or "depends on" can also help reduce
Kconfig circular dependency issues.
Therefore, change EXTCON_MAX8997's use of "depends on" for
IRQ_DOMAIN to "select".
Link: https://lore.kernel.org/lkml/20240213060028.9744-1-rdunlap@infradead.org/
Fixes: dca1a71e4108 ("extcon: Add support irq domain for MAX8997 muic")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Switch to use dev_err_probe() to simplify the error path and
unify a message template.
Link: https://lore.kernel.org/lkml/20231222161954.2955905-1-andriy.shevchenko@linux.intel.com/
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Do not use "/**" for non-kernel-doc comments. This prevents a warning
from scripts/kernel-doc:
warning: expecting prototype for extcon(). Prototype was for USB_ID_DEBOUNCE_MS() instead
Link: https://lore.kernel.org/lkml/20231205231204.1130-1-rdunlap@infradead.org/
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Remove 'IRQF_TRIGGER_FALLING' request which is not allowed on
every interrupt controller (i.e. arm64 GIC). Replace flag by a
request that depends on the actual device-tree setting.
Link: https://lore.kernel.org/all/02a701da2717$48abf150$da03d3f0$@samsung.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311221355.yxYpTIw3-lkp@intel.com/
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
In the error path after calling dev_set_name(), the device
name is leaked. To fix this, moving dev_set_name() after the
error path and before device_register.
Link: https://lore.kernel.org/lkml/TYZPR01MB4784ADCD3E951E0863F3DB72D5B8A@TYZPR01MB4784.apcprd01.prod.exchangelabs.com/
Signed-off-by: Yaxiong Tian <tianyaxiong@kylinos.cn>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
There are following smatch warning:
drivers/extcon/extcon-rtk-type-c.c:905 __updated_type_c_parameter_by_efuse()
error: 'buf' dereferencing possible ERR_PTR()
The nvmem_cell_read may fail to read. So, driver must handle failure cases.
Link: https://lore.kernel.org/all/20231016053510.28881-1-stanley_chang@realtek.com/
Fixes: 8a590d7371f0 ("extcon: add Realtek DHC RTD SoC Type-C driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/a469dd51-f5d5-4e8f-ba36-6c7cea046fb8@moroto.mountain/
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Add the needed device-tree compatible string to the MAX77843 extcon
driver, so it can be automatically loaded when compiled as a kernel
module and given device-tree contains separate 'muic' node under the main
MAX77843 PMIC node.
Link: https://lore.kernel.org/all/20231006100434.2908243-2-m.szyprowski@samsung.com/
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Commit 57f706bf7307 ("ARM: dts: samsung: exynos4412-midas: add USB
connector and USB OTG") added a 'muic' node to the MAX77693 PMIC
definition in various device-tree files. Since that commit, the newly
created MFD cell gained its own of_node and compatible string. This
changed its modalias, what in turn broke automated loading of the driver
module, because the new modalias is based on the of_node compatible
string, not the platform device name.
Fix this by adding the needed device-tree compatible string.
Link: https://lore.kernel.org/all/20231006100434.2908243-1-m.szyprowski@samsung.com/
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
This patch adds the extcon driver for Realtek DHC (digital home center)
RTD SoCs type-c module. This can be used to detect whether the port is
configured as a downstream or upstream facing port. And notify the status
of extcon to listeners.
Link: https://lore.kernel.org/lkml/20230904051253.23208-2-stanley_chang@realtek.com/
Signed-off-by: Stanley Chang <stanley_chang@realtek.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The driver fails to link when CONFIG_POWER_SUPPLY is disabled:
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_psy_get_prop':
extcon-intel-cht-wc.c:(.text+0x15ccda7): undefined reference to `power_supply_get_drvdata'
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_pwrsrc_event':
extcon-intel-cht-wc.c:(.text+0x15cd3e9): undefined reference to `power_supply_changed'
x86_64-linux-ld: vmlinux.o: in function `cht_wc_extcon_probe':
extcon-intel-cht-wc.c:(.text+0x15cd596): undefined reference to `devm_power_supply_register'
It should be possible to change the driver to not require this at
compile time and still provide other functions, but adding a hard
Kconfig dependency does not seem to have any practical downsides
and is simpler since the option is normally enabled anyway.
Fixes: 66e31186cd2aa ("extcon: intel-cht-wc: Add support for registering a power_supply class-device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
