| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Introduce a new hypercall, __pkvm_force_reclaim_guest_page(), to allow
the host to forcefully reclaim a physical page that was previous donated
to a protected guest. This results in the page being zeroed and the
previous guest mapping being poisoned so that new pages cannot be
subsequently donated at the same IPA.
Tested-by: Fuad Tabba <tabba@google.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20260330144841.26181-26-will@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Rework host_stage2_set_owner_locked() to add a new helper function,
host_stage2_set_owner_metadata_locked(), which will allow us to store
additional metadata alongside a 3-bit owner ID for invalid host stage-2
entries.
Tested-by: Fuad Tabba <tabba@google.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20260330144841.26181-23-will@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
kvm_pgtable_stage2_set_owner() can be generalised into a way to store
up to 59 bits in the page tables alongside a 4-bit 'type' identifier
specific to the format of the 59-bit payload.
Introduce kvm_pgtable_stage2_annotate() and move the existing invalid
ptes (for locked ptes and donated pages) over to the new scheme.
Tested-by: Fuad Tabba <tabba@google.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20260330144841.26181-22-will@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In preparation for supporting protected VMs, whose memory pages are
isolated from the host, introduce a new pKVM hypercall to allow the
donation of pages to a guest.
Tested-by: Fuad Tabba <tabba@google.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20260330144841.26181-13-will@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
* kvm-arm64/fwb-for-all:
: .
: Allow pKVM's host stage-2 mappings to use the Force Write Back version
: of the memory attributes by using the "pass-through' encoding.
:
: This avoids having two separate encodings for S2 on a given platform.
: .
KVM: arm64: Simplify PAGE_S2_MEMATTR
KVM: arm64: Kill KVM_PGTABLE_S2_NOFWB
KVM: arm64: Switch pKVM host S2 over to KVM_PGTABLE_S2_AS_S1
KVM: arm64: Add KVM_PGTABLE_S2_AS_S1 flag
arm64: Add MT_S2{,_FWB}_AS_S1 encodings
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Nobody is using this flag anymore, so remove it. This allows
some cleanup by removing stage2_has_fwb(), which is can be replaced
by a direct check on the capability.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260123191637.715429-5-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Plumb the MT_S2{,_FWB}_AS_S1 memory types into the KVM_S2_MEMATTR()
macro with a new KVM_PGTABLE_S2_AS_S1 flag.
Nobody selects it yet.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260123191637.715429-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that we potentially have two bits to deal with when setting
execution permissions, make sure we correctly handle them when both
when building the page tables and when reading back from them.
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20251210173024.561160-7-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Commit ddcadb297ce5 ("KVM: arm64: Ignore EAGAIN for walks outside of a
fault") introduced a new walker flag ('KVM_PGTABLE_WALK_HANDLE_FAULT')
to KVM's page-table code. When set, the walk logic maintains its
previous behaviour of terminating a walk as soon as the visitor callback
returns an error. However, when the flag is clear, the walk will
continue if the visitor returns -EAGAIN and the error is then suppressed
and returned as zero to the caller.
Clearing the flag is beneficial when write-protecting a range of IPAs
with kvm_pgtable_stage2_wrprotect() but is not useful in any other
cases, either because we are operating on a single page (e.g.
kvm_pgtable_stage2_mkyoung() or kvm_phys_addr_ioremap()) or because the
early termination is desirable (e.g. when mapping pages from a fault in
user_mem_abort()).
Subsequently, commit e912efed485a ("KVM: arm64: Introduce the EL1 pKVM
MMU") hooked up pKVM's hypercall interface to the MMU code at EL1 but
failed to propagate any of the walker flags. As a result, page-table
walks at EL2 fail to set KVM_PGTABLE_WALK_HANDLE_FAULT even when the
early termination semantics are desirable on the fault handling path.
Rather than complicate the pKVM hypercall interface, invert the flag so
that the whole thing can be simplified and only pass the new flag
('KVM_PGTABLE_WALK_IGNORE_EAGAIN') from the wrprotect code.
Cc: Fuad Tabba <tabba@google.com>
Cc: Quentin Perret <qperret@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Fixes: fce886a60207 ("KVM: arm64: Plumb the pKVM MMU in KVM")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Link: https://msgid.link/20260105154939.11041-2-will@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
The current XN implementation is tied to the EL2 translation regime,
and fall flat on its face with the EL2&0 one that is used for hVHE,
as the permission bit for privileged execution is a different one.
Fixes: 6537565fd9b7f ("KVM: arm64: Adjust EL2 stage-1 leaf AP bits when ARM64_KVM_HVHE is set")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://msgid.link/20251210173024.561160-2-maz@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
* kvm-arm64/nv-xnx-haf: (22 commits)
: Support for FEAT_XNX and FEAT_HAF in nested
:
: Add support for a couple of MMU-related features that weren't
: implemented by KVM's software page table walk:
:
: - FEAT_XNX: Allows the hypervisor to describe execute permissions
: separately for EL0 and EL1
:
: - FEAT_HAF: Hardware update of the Access Flag, which in the context of
: nested means software walkers must also set the Access Flag.
:
: The series also adds some basic support for testing KVM's emulation of
: the AT instruction, including the implementation detail that AT sets the
: Access Flag in KVM.
KVM: arm64: at: Update AF on software walk only if VM has FEAT_HAFDBS
KVM: arm64: at: Use correct HA bit in TCR_EL2 when regime is EL2
KVM: arm64: Document KVM_PGTABLE_PROT_{UX,PX}
KVM: arm64: Fix spelling mistake "Unexpeced" -> "Unexpected"
KVM: arm64: Add break to default case in kvm_pgtable_stage2_pte_prot()
KVM: arm64: Add endian casting to kvm_swap_s[12]_desc()
KVM: arm64: Fix compilation when CONFIG_ARM64_USE_LSE_ATOMICS=n
KVM: arm64: selftests: Add test for AT emulation
KVM: arm64: nv: Expose hardware access flag management to NV guests
KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW
KVM: arm64: Implement HW access flag management in stage-1 SW PTW
KVM: arm64: Propagate PTW errors up to AT emulation
KVM: arm64: Add helper for swapping guest descriptor
KVM: arm64: nv: Use pgtable definitions in stage-2 walk
KVM: arm64: Handle endianness in read helper for emulated PTW
KVM: arm64: nv: Stop passing vCPU through void ptr in S2 PTW
KVM: arm64: Call helper for reading descriptors directly
KVM: arm64: nv: Advertise support for FEAT_XNX
KVM: arm64: Teach ptdump about FEAT_XNX permissions
KVM: arm64: nv: Forward FEAT_XNX permissions to the shadow stage-2
...
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Commit 2608563b466b ("KVM: arm64: Add support for FEAT_XNX stage-2
permissions") added the KVM_PGTABLE_PROX_{UX,PX} permissions to stage 2 and
to EL2 translation regimes, but left them undocumented. Let's fix that.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://msgid.link/20251128100946.74210-2-alexandru.elisei@arm.com
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
FEAT_XNX adds support for encoding separate execute permissions for EL0
and EL1 at stage-2. Add support for this to the page table library,
hiding the unintuitive encoding scheme behind generic pX and uX
permission flags.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Link: https://msgid.link/20251124190158.177318-3-oupton@kernel.org
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
Split kvm_pgtable_stage2_destroy() into two:
- kvm_pgtable_stage2_destroy_range(), that performs the
page-table walk and free the entries over a range of addresses.
- kvm_pgtable_stage2_destroy_pgd(), that frees the PGD.
This refactoring enables subsequent patches to free large page-tables
in chunks, calling cond_resched() between each chunk, to yield the
CPU as necessary.
Existing callers of kvm_pgtable_stage2_destroy(), that probably cannot
take advantage of this (such as nVMHE), will continue to function as is.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Suggested-by: Oliver Upton <oupton@kernel.org>
Link: https://msgid.link/20251113052452.975081-3-rananta@google.com
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
This reverts commit 0e89ca13ee5ff41b437bb2a003c0eaf34ea43555.
The functional change that depended on this refactoring has been found
to be quite problematic. Reverting the whole pile to start fresh when
new fixes are available.
Message-ID: <20250910180930.3679473-3-oliver.upton@linux.dev>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Split kvm_pgtable_stage2_destroy() into two:
- kvm_pgtable_stage2_destroy_range(), that performs the
page-table walk and free the entries over a range of addresses.
- kvm_pgtable_stage2_destroy_pgd(), that frees the PGD.
This refactoring enables subsequent patches to free large page-tables
in chunks, calling cond_resched() between each chunk, to yield the
CPU as necessary.
Existing callers of kvm_pgtable_stage2_destroy(), that probably cannot
take advantage of this (such as nVMHE), will continue to function as is.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250820162242.2624752-2-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
With the introduction of stage-2 huge mappings in the pKVM hypervisor,
guest pages CMO is needed for PMD_SIZE size. Fixmap only supports
PAGE_SIZE and iterating over the huge-page is time consuming (mostly due
to TLBI on hyp_fixmap_unmap) which is a problem for EL2 latency.
Introduce a shared PMD_SIZE fixmap (hyp_fixblock_map/hyp_fixblock_unmap)
to improve guest page CMOs when stage-2 huge mappings are installed.
On a Pixel6, the iterative solution resulted in a latency of ~700us,
while the PMD_SIZE fixmap reduces it to ~100us.
Because of the horrendous private range allocation that would be
necessary, this is disabled for 64KiB pages systems.
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-11-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In preparation for supporting stage-2 huge mappings for np-guest, let's
convert pgt.pkvm_mappings to an interval tree.
No functional change intended.
Suggested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/r/20250521124834.1070650-8-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Introduce a set of helper functions allowing to manipulate the pKVM
guest stage-2 page-tables from EL1 using pKVM's HVC interface.
Each helper has an exact one-to-one correspondance with the traditional
kvm_pgtable_stage2_*() functions from pgtable.c, with a strictly
matching prototype. This will ease plumbing later on in mmu.c.
These callbacks track the gfn->pfn mappings in a simple rb_tree indexed
by IPA in lieu of a page-table. This rb-tree is kept in sync with pKVM's
state and is protected by the mmu_lock like a traditional stage-2
page-table.
Signed-off-by: Quentin Perret <qperret@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-18-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Turn kvm_pgtable_stage2_init() into a static inline function instead of
a macro. This will allow the usage of typeof() on it later on.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-8-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
kvm_pgtable_stage2_relax_perms currently assumes that it is being called
from a 'shared' walker, which will not be true once called from pKVM. To
allow for the re-use of that function, make the walk flags one of its
parameters.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-7-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
kvm_pgtable_stage2_mkyoung currently assumes that it is being called
from a 'shared' walker, which will not be true once called from pKVM.
To allow for the re-use of that function, make the walk flags one of
its parameters.
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20241218194059.3670226-6-qperret@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Don't mark pages/folios as accessed in the primary MMU when making a SPTE
young in KVM's secondary MMU, as doing so relies on
kvm_pfn_to_refcounted_page(), and generally speaking is unnecessary and
wasteful. KVM participates in page aging via mmu_notifiers, so there's no
need to push "accessed" updates to the primary MMU.
Dropping use of kvm_set_pfn_accessed() also paves the way for removing
kvm_pfn_to_refcounted_page() and all its users.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-84-seanjc@google.com>
|
|
In preparation for using the stage-2 definitions in ptdump, move some of
these macros in the common header.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Link: https://lore.kernel.org/r/20240909124721.1672199-2-sebastianene@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Currently, KVM for ARM64 maps at stage 2 memory that is considered device
(i.e. it is not RAM) with DEVICE_nGnRE memory attributes; this setting
overrides (as per the ARM architecture [1]) any device MMIO mapping
present at stage 1, resulting in a set-up whereby a guest operating
system cannot determine device MMIO mapping memory attributes on its
own but it is always overridden by the KVM stage 2 default.
This set-up does not allow guest operating systems to select device
memory attributes independently from KVM stage-2 mappings
(refer to [1], "Combining stage 1 and stage 2 memory type attributes"),
which turns out to be an issue in that guest operating systems
(e.g. Linux) may request to map devices MMIO regions with memory
attributes that guarantee better performance (e.g. gathering
attribute - that for some devices can generate larger PCIe memory
writes TLPs) and specific operations (e.g. unaligned transactions)
such as the NormalNC memory type.
The default device stage 2 mapping was chosen in KVM for ARM64 since
it was considered safer (i.e. it would not allow guests to trigger
uncontained failures ultimately crashing the machine) but this
turned out to be asynchronous (SError) defeating the purpose.
Failures containability is a property of the platform and is independent
from the memory type used for MMIO device memory mappings.
Actually, DEVICE_nGnRE memory type is even more problematic than
Normal-NC memory type in terms of faults containability in that e.g.
aborts triggered on DEVICE_nGnRE loads cannot be made, architecturally,
synchronous (i.e. that would imply that the processor should issue at
most 1 load transaction at a time - it cannot pipeline them - otherwise
the synchronous abort semantics would break the no-speculation attribute
attached to DEVICE_XXX memory).
This means that regardless of the combined stage1+stage2 mappings a
platform is safe if and only if device transactions cannot trigger
uncontained failures and that in turn relies on platform capabilities
and the device type being assigned (i.e. PCIe AER/DPC error containment
and RAS architecture[3]); therefore the default KVM device stage 2
memory attributes play no role in making device assignment safer
for a given platform (if the platform design adheres to design
guidelines outlined in [3]) and therefore can be relaxed.
For all these reasons, relax the KVM stage 2 device memory attributes
from DEVICE_nGnRE to Normal-NC.
The NormalNC was chosen over a different Normal memory type default
at stage-2 (e.g. Normal Write-through) to avoid cache allocation/snooping.
Relaxing S2 KVM device MMIO mappings to Normal-NC is not expected to
trigger any issue on guest device reclaim use cases either (i.e. device
MMIO unmap followed by a device reset) at least for PCIe devices, in that
in PCIe a device reset is architected and carried out through PCI config
space transactions that are naturally ordered with respect to MMIO
transactions according to the PCI ordering rules.
Having Normal-NC S2 default puts guests in control (thanks to
stage1+stage2 combined memory attributes rules [1]) of device MMIO
regions memory mappings, according to the rules described in [1]
and summarized here ([(S1) - stage1], [(S2) - stage 2]):
S1 | S2 | Result
NORMAL-WB | NORMAL-NC | NORMAL-NC
NORMAL-WT | NORMAL-NC | NORMAL-NC
NORMAL-NC | NORMAL-NC | NORMAL-NC
DEVICE<attr> | NORMAL-NC | DEVICE<attr>
It is worth noting that currently, to map devices MMIO space to user
space in a device pass-through use case the VFIO framework applies memory
attributes derived from pgprot_noncached() settings applied to VMAs, which
result in device-nGnRnE memory attributes for the stage-1 VMM mappings.
This means that a userspace mapping for device MMIO space carried
out with the current VFIO framework and a guest OS mapping for the same
MMIO space may result in a mismatched alias as described in [2].
Defaulting KVM device stage-2 mappings to Normal-NC attributes does not
change anything in this respect, in that the mismatched aliases would
only affect (refer to [2] for a detailed explanation) ordering between
the userspace and GuestOS mappings resulting stream of transactions
(i.e. it does not cause loss of property for either stream of
transactions on its own), which is harmless given that the userspace
and GuestOS access to the device is carried out through independent
transactions streams.
A Normal-NC flag is not present today. So add a new kvm_pgtable_prot
(KVM_PGTABLE_PROT_NORMAL_NC) flag for it, along with its
corresponding PTE value 0x5 (0b101) determined from [1].
Lastly, adapt the stage2 PTE property setter function
(stage2_set_prot_attr) to handle the NormalNC attribute.
The entire discussion leading to this patch series may be followed through
the following links.
Link: https://lore.kernel.org/all/20230907181459.18145-3-ankita@nvidia.com
Link: https://lore.kernel.org/r/20231205033015.10044-1-ankita@nvidia.com
[1] section D8.5.5 - DDI0487J_a_a-profile_architecture_reference_manual.pdf
[2] section B2.8 - DDI0487J_a_a-profile_architecture_reference_manual.pdf
[3] sections 1.7.7.3/1.8.5.2/appendix C - DEN0029H_SBSA_7.1.pdf
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Ankit Agrawal <ankita@nvidia.com>
Link: https://lore.kernel.org/r/20240224150546.368-2-ankita@nvidia.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
FEAT_LPA2 increases the maximum levels of translation from 4 to 5 for
the 4KB page case, when IA is >48 bits. While we can still use 4 levels
for stage2 translation in this case (due to stage2 allowing concatenated
page tables for first level lookup), the same kvm_pgtable library is
used for the hyp stage1 page tables and stage1 does not support
concatenation.
Therefore, modify the library to support up to 5 levels. Previous
patches already laid the groundwork for this by refactoring code to work
in terms of KVM_PGTABLE_FIRST_LEVEL and KVM_PGTABLE_LAST_LEVEL. So we
just need to change these macros.
The hardware sometimes encodes the new level differently from the
others: One such place is when reading the level from the FSC field in
the ESR_EL2 register. We never expect to see the lowest level (-1) here
since the stage 2 page tables always use concatenated tables for first
level lookup and therefore only use 4 levels of lookup. So we get away
with just adding a comment to explain why we are not being careful about
decoding level -1.
For stage2 VTCR_EL2.SL2 is introduced to encode the new start level.
However, since we always use concatenated page tables for first level
look up at stage2 (and therefore we will never need the new extra level)
we never touch this new field.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231127111737.1897081-10-ryan.roberts@arm.com
|
|
With the introduction of FEAT_LPA2, the Arm ARM adds a new level of
translation, level -1, so levels can now be in the range [-1;3]. 3 is
always the last level and the first level is determined based on the
number of VA bits in use.
Convert level variables to use a signed type in preparation for
supporting this new level -1.
Since the last level is always anchored at 3, and the first level varies
to suit the number of VA/IPA bits, take the opportunity to replace
KVM_PGTABLE_MAX_LEVELS with the 2 macros KVM_PGTABLE_FIRST_LEVEL and
KVM_PGTABLE_LAST_LEVEL. This removes the assumption from the code that
levels run from 0 to KVM_PGTABLE_MAX_LEVELS - 1, which will soon no
longer be true.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231127111737.1897081-9-ryan.roberts@arm.com
|
|
Implement a simple policy whereby if the HW supports FEAT_LPA2 for the
page size we are using, always use LPA2-style page-tables for stage 2
and hyp stage 1 (assuming an nvhe hyp), regardless of the VMM-requested
IPA size or HW-implemented PA size. When in use we can now support up to
52-bit IPA and PA sizes.
We use the previously created cpu feature to track whether LPA2 is
supported for deciding whether to use the LPA2 or classic pte format.
Note that FEAT_LPA2 brings support for bigger block mappings (512GB with
4KB, 64GB with 16KB). We explicitly don't enable these in the library
because stage2_apply_range() works on batch sizes of the largest used
block mapping, and increasing the size of the batch would lead to soft
lockups. See commit 5994bc9e05c2 ("KVM: arm64: Limit
stage2_apply_range() batch size to largest block").
With the addition of LPA2 support in the hypervisor, the PA size
supported by the HW must be capped with a runtime decision, rather than
simply using a compile-time decision based on PA_BITS. For example, on a
system that advertises 52 bit PA but does not support FEAT_LPA2, A 4KB
or 16KB kernel compiled with LPA2 support must still limit the PA size
to 48 bits.
Therefore, move the insertion of the PS field into TCR_EL2 out of
__kvm_hyp_init assembly code and instead do it in cpu_prepare_hyp_mode()
where the rest of TCR_EL2 is prepared. This allows us to figure out PS
with kvm_get_parange(), which has the appropriate logic to ensure the
above requirement. (and the PS field of VTCR_EL2 is already populated
this way).
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231127111737.1897081-8-ryan.roberts@arm.com
|
|
Add stub functions which is initially always return false. These provide
the hooks that we need to update the range-based TLBI routines, whose
operands are encoded differently depending on whether lpa2 is enabled or
not.
The kernel and kvm will enable the use of lpa2 asynchronously in future,
and part of that enablement will involve fleshing out their respective
hook to advertise when it is using lpa2.
Since the kernel's decision to use lpa2 relies on more than just whether
the HW supports the feature, it can't just use the same static key as
kvm. This is another reason to use separate functions. lpa2_is_enabled()
is already implemented as part of Ard's kernel lpa2 series. Since kvm
will make its decision solely based on HW support, kvm_lpa2_is_enabled()
will be defined as system_supports_lpa2() once kvm starts using lpa2.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231127111737.1897081-3-ryan.roberts@arm.com
|
|
Implement the helper kvm_tlb_flush_vmid_range() that acts
as a wrapper for range-based TLB invalidations. For the
given VMID, use the range-based TLBI instructions to do
the job or fallback to invalidating all the TLB entries.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811045127.3308641-11-rananta@google.com
|
|
Userspace is allowed to select any PAGE_SIZE aligned hva to back guest
memory. This is even the case with hugepages, although it is a rather
suboptimal configuration as PTE level mappings are used at stage-2.
The arm64 page aging handlers have an assumption that the specified
range is exactly one page/block of memory, which in the aforementioned
case is not necessarily true. All together this leads to the WARN() in
kvm_age_gfn() firing.
However, the WARN is only part of the issue as the table walkers visit
at most a single leaf PTE. For hugepage-backed memory in a memslot that
isn't hugepage-aligned, page aging entirely misses accesses to the
hugepage beyond the first page in the memslot.
Add a new walker dedicated to handling page aging MMU notifiers capable
of walking a range of PTEs. Convert kvm(_test)_age_gfn() over to the new
walker and drop the WARN that caught the issue in the first place. The
implementation of this walker was inspired by the test_clear_young()
implementation by Yu Zhao [*], but repurposed to address a bug in the
existing aging implementation.
Cc: stable@vger.kernel.org # v5.15
Fixes: 056aad67f836 ("kvm: arm/arm64: Rework gpa callback handlers")
Link: https://lore.kernel.org/kvmarm/20230526234435.662652-6-yuzhao@google.com/
Co-developed-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20230627235405.4069823-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.5
- Eager page splitting optimization for dirty logging, optionally
allowing for a VM to avoid the cost of block splitting in the stage-2
fault path.
- Arm FF-A proxy for pKVM, allowing a pKVM host to safely interact with
services that live in the Secure world. pKVM intervenes on FF-A calls
to guarantee the host doesn't misuse memory donated to the hyp or a
pKVM guest.
- Support for running the split hypervisor with VHE enabled, known as
'hVHE' mode. This is extremely useful for testing the split
hypervisor on VHE-only systems, and paves the way for new use cases
that depend on having two TTBRs available at EL2.
- Generalized framework for configurable ID registers from userspace.
KVM/arm64 currently prevents arbitrary CPU feature set configuration
from userspace, but the intent is to relax this limitation and allow
userspace to select a feature set consistent with the CPU.
- Enable the use of Branch Target Identification (FEAT_BTI) in the
hypervisor.
- Use a separate set of pointer authentication keys for the hypervisor
when running in protected mode, as the host is untrusted at runtime.
- Ensure timer IRQs are consistently released in the init failure
paths.
- Avoid trapping CTR_EL0 on systems with Enhanced Virtualization Traps
(FEAT_EVT), as it is a register commonly read from userspace.
- Erratum workaround for the upcoming AmpereOne part, which has broken
hardware A/D state management.
As a consequence of the hVHE series reworking the arm64 software
features framework, the for-next/module-alloc branch from the arm64 tree
comes along for the ride.
|
|
* kvm-arm64/eager-page-splitting:
: Eager Page Splitting, courtesy of Ricardo Koller.
:
: Dirty logging performance is dominated by the cost of splitting
: hugepages to PTE granularity. On systems that mere mortals can get their
: hands on, each fault incurs the cost of a full break-before-make
: pattern, wherein the broadcast invalidation and ensuing serialization
: significantly increases fault latency.
:
: The goal of eager page splitting is to move the cost of hugepage
: splitting out of the stage-2 fault path and instead into the ioctls
: responsible for managing the dirty log:
:
: - If manual protection is enabled for the VM, hugepage splitting
: happens in the KVM_CLEAR_DIRTY_LOG ioctl. This is desirable as it
: provides userspace granular control over hugepage splitting.
:
: - Otherwise, if userspace relies on the legacy dirty log behavior
: (clear on collection), hugepage splitting is done at the moment dirty
: logging is enabled for a particular memslot.
:
: Support for eager page splitting requires explicit opt-in from
: userspace, which is realized through the
: KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE capability.
arm64: kvm: avoid overflow in integer division
KVM: arm64: Use local TLBI on permission relaxation
KVM: arm64: Split huge pages during KVM_CLEAR_DIRTY_LOG
KVM: arm64: Open-code kvm_mmu_write_protect_pt_masked()
KVM: arm64: Split huge pages when dirty logging is enabled
KVM: arm64: Add kvm_uninit_stage2_mmu()
KVM: arm64: Refactor kvm_arch_commit_memory_region()
KVM: arm64: Add kvm_pgtable_stage2_split()
KVM: arm64: Add KVM_CAP_ARM_EAGER_SPLIT_CHUNK_SIZE
KVM: arm64: Export kvm_are_all_memslots_empty()
KVM: arm64: Add helper for creating unlinked stage2 subtrees
KVM: arm64: Add KVM_PGTABLE_WALK flags for skipping CMOs and BBM TLBIs
KVM: arm64: Rename free_removed to free_unlinked
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
The preorder callback on the kvm_pgtable_stage2_map() path can replace
a table with a block, then recursively free the detached table. The
higher-level walking logic stashes the old page table entry and
then walks the freed table, invoking the leaf callback and
potentially freeing pgtable pages prematurely.
In normal operation, the call to tear down the detached stage-2
is indirected and uses an RCU callback to trigger the freeing.
RCU is not available to pKVM, which is where this bug is
triggered.
Change the behavior of the walker to reload the page table entry
after invoking the walker callback on preorder traversal, as it
does for leaf entries.
Tested on Pixel 6.
Fixes: 5c359cca1faf ("KVM: arm64: Tear down unlinked stage-2 subtree after break-before-make")
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230522103258.402272-1-tabba@google.com
|
|
Add a new stage2 function, kvm_pgtable_stage2_split(), for splitting a
range of huge pages. This will be used for eager-splitting huge pages
into PAGE_SIZE pages. The goal is to avoid having to split huge pages
on write-protection faults, and instead use this function to do it
ahead of time for large ranges (e.g., all guest memory in 1G chunks at
a time).
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20230426172330.1439644-7-ricarkol@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add a capability for userspace to specify the eager split chunk size.
The chunk size specifies how many pages to break at a time, using a
single allocation. Bigger the chunk size, more pages need to be
allocated ahead of time.
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20230426172330.1439644-6-ricarkol@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add a stage2 helper, kvm_pgtable_stage2_create_unlinked(), for
creating unlinked tables (which is the opposite of
kvm_pgtable_stage2_free_unlinked()). Creating an unlinked table is
useful for splitting level 1 and 2 entries into subtrees of PAGE_SIZE
PTEs. For example, a level 1 entry can be split into PAGE_SIZE PTEs
by first creating a fully populated tree, and then use it to replace
the level 1 entry in a single step. This will be used in a subsequent
commit for eager huge-page splitting (a dirty-logging optimization).
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20230426172330.1439644-4-ricarkol@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Add two flags to kvm_pgtable_visit_ctx, KVM_PGTABLE_WALK_SKIP_BBM_TLBI
and KVM_PGTABLE_WALK_SKIP_CMO, to indicate that the walk should not
perform TLB invalidations (TLBIs) in break-before-make (BBM) nor cache
maintenance operations (CMO). This will be used by a future commit to
create unlinked tables not accessible to the HW page-table walker.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20230426172330.1439644-3-ricarkol@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Normalize on referring to tables outside of an active paging structure
as 'unlinked'.
A subsequent change to KVM will add support for building page tables
that are not part of an active paging structure. The existing
'removed_table' terminology is quite clunky when applied in this
context.
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Link: https://lore.kernel.org/r/20230426172330.1439644-2-ricarkol@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Until now, the page table walker counted increments to the PA and IPA
of a walk in two separate places. While the PA is incremented as soon as
a leaf PTE is installed in stage2_map_walker_try_leaf(), the IPA is
actually bumped in the generic table walker context. Critically,
__kvm_pgtable_visit() rereads the PTE after the LEAF callback returns
to work out if a table or leaf was installed, and only bumps the IPA for
a leaf PTE.
This arrangement worked fine when we handled faults behind the write lock,
as the walker had exclusive access to the stage-2 page tables. However,
commit 1577cb5823ce ("KVM: arm64: Handle stage-2 faults in parallel")
started handling all stage-2 faults behind the read lock, opening up a
race where a walker could increment the PA but not the IPA of a walk.
Nothing good ensues, as the walker starts mapping with the incorrect
IPA -> PA relationship.
For example, assume that two vCPUs took a data abort on the same IPA.
One observes that dirty logging is disabled, and the other observed that
it is enabled:
vCPU attempting PMD mapping vCPU attempting PTE mapping
====================================== =====================================
/* install PMD */
stage2_make_pte(ctx, leaf);
data->phys += granule;
/* replace PMD with a table */
stage2_try_break_pte(ctx, data->mmu);
stage2_make_pte(ctx, table);
/* table is observed */
ctx.old = READ_ONCE(*ptep);
table = kvm_pte_table(ctx.old, level);
/*
* map walk continues w/o incrementing
* IPA.
*/
__kvm_pgtable_walk(..., level + 1);
Bring an end to the whole mess by using the IPA as the single source of
truth for how far along a walk has gotten. Work out the correct PA to
map by calculating the IPA offset from the beginning of the walk and add
that to the starting physical address.
Cc: stable@vger.kernel.org
Fixes: 1577cb5823ce ("KVM: arm64: Handle stage-2 faults in parallel")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230421071606.1603916-2-oliver.upton@linux.dev
|
|
The page table walkers are invoked outside fault handling paths, such as
write protecting a range of memory. EAGAIN is generally used by the
walkers to retry execution due to races on a particular PTE, like taking
an access fault on a PTE being invalidated from another thread.
This early return behavior is undesirable for walkers that operate
outside a fault handler. Suppress EAGAIN and continue the walk if
operating outside a fault handler.
Link: https://lore.kernel.org/r/20221202185156.696189-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
Consistently use KVM's own pte types and helpers in
handle_access_fault().
No functional change intended.
Link: https://lore.kernel.org/r/20221202185156.696189-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
* kvm-arm64/pkvm-vcpu-state: (25 commits)
: .
: Large drop of pKVM patches from Will Deacon and co, adding
: a private vm/vcpu state at EL2, managed independently from
: the EL1 state. From the cover letter:
:
: "This is version six of the pKVM EL2 state series, extending the pKVM
: hypervisor code so that it can dynamically instantiate and manage VM
: data struc |
