| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Unlike older GIC variants, the GICv3 DT bindings do not support
specifying a CPU mask in PPI interrupt specifiers. Drop the masks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The Agilex devkit supports a separate eMMC daughter card. The
eMMC daughter card replaces the SDMMC slot that is on the default
daughter card and thus requires a separate board dts file.
Signed-off-by: Ng Tze Yee <tzeyee.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Move dma-controller node under simple-bus node to allow bus node specific
property able to be properly defined. This is require to fulfill Agilex5
bus limitation that is limited to 40-addressable-bit.
Update the compatible string for the DMA controller nodes in the Agilex5
device tree from the generic "snps,axi-dma-1.01a" to the platform-specific
"altr,agilex5-axi-dma". Add fallback capability to ensure driver is able
to initialize properly.
This change enables the use of platform-specific features and constraints
in the driver, such as setting a 40-bit DMA addressable mask through
dma-ranges, which is required for Agilex5. It also aligns with the updated
device tree bindings and driver support for this compatible string.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The DTS code coding style expects lowercase hex for values and unit
addresses.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
To enable SMMU integration, populate the iommus property to the ethernet
device-tree node.
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The Agilex5 Modular board consists of a compute module (Agilex5 SoCFPGA)
attached to a carrier board that provides PCIe and additional system
interfaces.
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add the `dma-coherent` property to these device nodes to inform the
kernel and DMA subsystem that the devices support hardware-managed
cache coherence.
Changes:
- Add `dma-coherent` to `cdns,hp-nfc`
- Add `dma-coherent` to both `snps,axi-dma-1.01a` instances
(dmac0, dmac1)
This aligns the Agilex5 device tree with the coherent DMA-capable
devices accordingly.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Update qspi flash partitions to support Remote System Update (RSU).
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Agilex3 SoCFPGA development kit is a small form factor board similar to
Agilex5 013b board. Agilex3 is derived from Agilex5 SoCFPGA, with the main
difference of CPU cores — Agilex3 has 2 cores compared to 4 in Agilex5.
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add the "altr,agilex5-dw-i3c-master" compatible string to the
I3C controller nodes on the Agilex5 SoCFPGA platform.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Introduce the Stratix10 SoC Service Layer (SVC) node for Agilex5 SoCs. This
node includes the compatible string "intel,agilex5-svc" and references a
reserved memory region used for communication with the Secure Device
Manager (SDM).
Agilex5 introduces changes in how reserved memory is mapped and accessed
compared to previous SoC generations. This commit updates the device tree
structure to support Agilex5-specific handling of the SVC interface.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add SMMU-V3 Performance Monitoring Counter Group (PMCG) nodes for
Agilex5 to support SMMU performance event monitoring.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add L2 and L3 cache nodes to the device tree to resolve the
"unable to detect cache hierarchy" warning reported by cacheinfo.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add the required clock-names property NAND controller. This change corrects
the warning:
socfpga_agilex5_socdk_nand.dtb: nand-controller@10b80000 (cdns,hp-nfc):
'clock-names' is a required property
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Agilex5 SoCFPGA 013b is a small form factor development kit.
Supports both tabletop and PCIe add-in card operation. It features
expansion headers for Raspberry Pi 4/5 HATs and Digilent Pmod modules,
enabling integration with popular ecosystems.
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add VGIC maintenance interrupt and interrupt-parent property for
interrupt controller, required to run Linux in virtualized environment.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
nand-controller@ffb90000 (altr,socfpga-denali-nand): Unevaluated
properties are not allowed ('flash@0' was unexpected)
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
clock-controller@ffd10000 (intel,agilex-clkmgr): 'clocks' is a required
property
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Agilex5 includes an ARM SMMU v3 (System Memory Management Unit) to provide
address translation and memory protection for DMA-capable devices such as
PCIe, USB, and other peripherals.
This commit adds the SMMU node to the Agilex5 device tree with compatible
string "arm,smmu-v3", along with its register space and interrupts.
The SMMU is required to:
- Enable DMA address translation for devices that cannot directly access
the full physical memory space.
- Provide isolation and memory protection by restricting device access
to specific regions of memory, improving system security.
- Support virtualization use cases by enabling safe and isolated device
passthrough to guest VMs.
- Align with ARM platform architecture requirements for IOMMU support.
By describing the SMMU in the device tree, the Linux IOMMU framework
can probe and initialize it during boot. Devices in the system can then
bind to the SMMU via the `iommus` property, enabling memory translation
and protection features as expected.
The following devices are updated to reference the SMMU:
- NAND controller
- DMA controller
- SPI controller
This change is a necessary step toward full enablement high-speed
peripherals on Agilex5.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Enable the GMAC0 node for the Agilex5 device when using the NAND
daughter card.
Signed-off-by: Boon Khai Ng <boon.khai.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add spi-tx-bus-width and spi-rx-bus-width properties with value 4 to the
agilex5 device tree. This update configures the SPI controller to use a
4-bit bus width for both transmission and reception, potentially improving
SPI throughput and matching the hardware capabilities more closely.
Signed-off-by: Fong, Yan Kei <yan.kei.fong@altera.com>
Reviewed-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add spi-tx-bus-width and spi-rx-bus-width properties with value 4 to the
agilex device tree. This update configures the SPI controller to use a
4-bit bus width for both transmission and reception, potentially improving
SPI throughput and matching the hardware capabilities more closely.
Signed-off-by: Fong, Yan Kei <yan.kei.fong@altera.com>
Reviewed-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add spi-tx-bus-width and spi-rx-bus-width properties with value 4 to the
n5x device tree. This update configures the SPI controller to use a 4-bit
bus width for both transmission and reception, potentially improving SPI
throughput and matching the hardware capabilities more closely.
Signed-off-by: Fong, Yan Kei <yan.kei.fong@altera.com>
Reviewed-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Enable gmac2 on the Agilex5 SOCFGPA Development Kit. The MAC is connected
to a RGMII PHY on a daughter card. There are no RGMII clock delays
implemented the on PCB.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add the base device tree nodes for gmac0, gmac1, and gmac2 to the DTSI
for the Agilex5 SOCFPGA. Agilex5 has three Ethernet controllers based on
Synopsys DWC XGMAC IP version 2.10.
Signed-off-by: Mun Yew Tham <mun.yew.tham@altera.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The f2s-free-clk requires a clock-frequency value. We put in an
arbitrary value of 100 MHz for a constant. The true clock frequency
would get generated in an FPGA design and the bootloader will populated
in actual hardware designs.
This fixes warning like this:
arch/arm64/boot/dts/intel:34:8
4 f2s-free-clk (fixed-clock): 'clock-frequency' is a required property
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add DMA channel ids for spi0 and spi1 nodes in device tree.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add LED and memory nodes, and enabled GPIO0 for Agilex5 devkit.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add clock-frequency property to the internal oscillators, cb_intosc_ls_clk
and cb_intosc_hs_div2_clk.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add Micron qspi nor flash node for Intel SoCFPGA Agilex5.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Use the correct gpio0 address for Agilex5.
Fixes: 3f7c869e143a ("arm64: dts: socfpga: agilex5: Add gpio0 node and spi dma handshake id")
Cc: stable@vger.kernel.org
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The Agilex5 devkit supports a separate NAND daughter card.
The NAND daughter card replaces the SDMMC slot that is on the default
daughter card thus requires a separate board dts file.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add gpio0 controller node and correct DMA handshake ID for SPI
tx and rx channels.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add VGIC maintenance interrupt and interrupt-parent property for
interrupt controller, required to run Linux in virtualized environment.
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Flash node uses single "partition" node to describe partitions, so
remove deprecated address/size-cells properties to also fix dtc W=1
warnings:
socfpga_n5x_socdk.dts:85.10-114.4: Warning (avoid_unnecessary_addr_size): /soc@0/spi@ff8d2000/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Flash node uses single "partition" node to describe partitions, so
remove deprecated address/size-cells properties to also fix dtc W=1
warnings:
socfpga_agilex_socdk.dts:108.10-137.4: Warning (avoid_unnecessary_addr_size): /soc@0/spi@ff8d2000/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The "arm,armv8-pmuv3" compatible is intended only for s/w models. Primarily,
it doesn't provide any detail on uarch specific events.
There's still remaining cases for CPUs without any corresponding PMU
definition and for big.LITTLE systems which only have a single PMU node
(there should be one per core type).
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://lore.kernel.org/r/20240417203853.3212103-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Following change in the I3C bindings, the "master" suffix in I3C
controller node name is discouraged (it is "controller" now) and not
accurate (if device supports also target mode).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
New device nodes are enabled by default.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The "soc" node has ranges with addresses, so it is should have unit
address to fix dtc W=1 warnings like:
socfpga_agilex.dtsi:152.6-674.4: Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The "soc" node is supposed to have only MMIO children, so move the
firmware/svc node to top level to fix dtc W=1 warnings like:
socfpga_agilex.dtsi:663.12-673.5: Warning (simple_bus_reg): /soc@0/firmware: missing or empty reg/ranges property
The node should still be instantiated by drivers/of/platform.c, just
like in all other platforms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The "soc" node is supposed to have only MMIO children, so move the FPGA
region node to top level to fix dtc W=1 warnings like:
socfpga_agilex.dtsi:141.20-146.5: Warning (simple_bus_reg): /soc@0/base_fpga_region: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Use a generic node name for the pin controller node to fix:
/socfpga_agilex_n6000.dtb: pinconf@ffd13100: $nodename:0: 'pinconf@ffd13100' does not match '^(pinctrl|pinmux)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
cdns,page-size and cdns,block-size are neither documented nor used by
Linux, so remove them to fix dtbs_check warnings like:
socfpga_n5x_socdk.dtb: flash@0: Unevaluated properties are not allowed ('cdns,block-size', 'cdns,page-size' were unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add the initial device tree files for Intel Agilex5 SoCFPGA platform.
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The "stmmaceth-ocp" reset line on the SoCFPGA stmmac ethernet driver is
the same as the "ahb" reset on a standard stmmac ethernet.
commit ("843f603762a5 dt-bindings: net: snps,dwmac: Add 'ahb'
reset/reset-name") documented the second reset signal as 'ahb' instead
of 'stmmaceth-ocp'. Change the reset-names of the SoCFPGA DWMAC driver to
'ahb'. In order not to break ABI, we will keep support in thedwmac-socfpga
driver to still make use of "stmmaceth-ocp".
This also fixes the dtbs_check warning:
ethernet@ff802000: reset-names:1: 'ahb' was expected
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: update commit message to further describe the reason for the change
|
|
flash@0: partitions: Unevaluated properties are not allowed
('partition@3FE0000' was unexpected)
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Non-UBIFS related boot and fpga data should be stored in qspi_boot (mtd0)
while keeping the rootfs with UBIFS in the root partition "mtd1".
Thus, update the QSPI flash layout to support UBIFS in the mtd root
partition.
Signed-off-by: Alif Zakuan Yuslaimi <alif.zakuan.yuslaimi@intel.com>
Signed-off-by: Kah Jing Lee <kah.jing.lee@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The bindings expect "altr,rst-mgr" as a fallback in the rstmgr
compatible:
rstmgr@ffd11000: compatible: 'oneOf' conditional failed, one must be fixed:
['altr,stratix10-rst-mgr'] is too short
'altr,rst-mgr' was expected
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
