| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes
Microchip AT91 fixes for v6.19
This update includes:
- fix access to the PHYs on the Microchip LAN966X PCB8290 board
- fix the ranges DT property for flexcom9 on the Microchip SAMA7D65 SoC
- fix the #size-cells DT property for i2c3 on the Microchip SAMA7D65 SoC
* tag 'at91-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama7d65: fix size-cells property for i2c3
ARM: dts: microchip: sama7d65: fix the ranges property for flx9
ARM: dts: microchip: lan966x: Fix the access to the PHYs for pcb8290
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fix the #size-cells property for i2c3 node and remove the dtbs_check
error telling that "#size-cells: 0 was expected" from schema
atmel,at91sam-i2c.yaml and i2c-controller.yaml.
Fixes: b51e4aea3ecf ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC")
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20260102170135.70717-3-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
Update the ranges property for the flexcom9 as per the datasheet and
align with the reg property.
Fixes: b51e4aea3ecf ("ARM: dts: microchip: sama7d65: Add FLEXCOMs to sama7d65 SoC")
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20260102170135.70717-2-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.19:
- A mba8mx fix from Alexander Stein to correct Ethernet PHY IRQ trigger
type
- An i.MX95 fix from Carlos Song to correct I3C2 pclk
- A couple of imx8qm-mek changes from Haibo Chen to fix light sensor
interrupt type and usdhc2 regulator configuration
- An imx6q-ba16 change from Ian Ray to fix RTC interrupt level
- An imx8mp-dhcom-som change from Marek Vasut to fix sporadic Ethernet
link bouncing caused by interruptions on the PHY reference clock
- A couple of imx8mp-tx8p changes from Maud Spierings to fix compatible
and eqos nvmem-cells
- An ARM i.MX fix from Rob Herring to correct mc13xxx LED node names
- An imx8qm-ss-dma change from Sherry Sun to correct DMA channels for
LPUART
- A couple of imx95-toradex-smarc changes from Vitor Soares to fix
ethphy1 interrupt and SMARC_SDIO_WP label position
* tag 'imx-fixes-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: mba8mx: Fix Ethernet PHY IRQ support
arm64: dts: imx8qm-ss-dma: correct the dma channels of lpuart
arm64: dts: imx8mp: Fix LAN8740Ai PHY reference clock on DH electronics i.MX8M Plus DHCOM
arm64: dts: freescale: tx8p-ml81: fix eqos nvmem-cells
arm64: dts: freescale: moduline-display: fix compatible
dt-bindings: arm: fsl: moduline-display: fix compatible
ARM: dts: imx6q-ba16: fix RTC interrupt level
arm64: dts: freescale: imx95-toradex-smarc: fix SMARC_SDIO_WP label position
arm64: dts: freescale: imx95-toradex-smarc: use edge trigger for ethphy1 interrupt
arm64: dts: add off-on-delay-us for usdhc2 regulator
arm64: dts: imx8qm-mek: correct the light sensor interrupt type to low level
ARM: dts: nxp: imx: Fix mc13xxx LED node names
arm64: dts: imx95: correct I3C2 pclk to IMX95_CLK_BUSWAKEUP
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The problem is that the MDIO controller can't detect any of the PHYs.
The reason is that the lan966x is not pulling high the GPIO 53 that is
connected to the PHYs reset GPIO. Without doing this the PHYs are kept
in reset. The mdio controller framework has the possibility to control a
GPIO to release the reset of the PHYs. So take advantage of this and set
line to be high before accessing the PHYs.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20251119134750.394655-1-horatiu.vultur@microchip.com
[claudiu.beznea: add microchip in patch title, s/possiblity/possibility
in patch description]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
RTC interrupt level should be set to "LOW". This was revealed by the
introduction of commit:
f181987ef477 ("rtc: m41t80: use IRQ flags obtained from fwnode")
which changed the way IRQ type is obtained.
Fixes: 56c27310c1b4 ("ARM: dts: imx: Add Advantech BA-16 Qseven module")
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Node names are supposed to be generic and use hexadecimal unit-addresses.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The KS8995 switch was unconditionally wired to EthC (eth1)
on both MI424WR variants, this is wrong: the D revision has
the switch connected to EthB (eth0) so pull this assingment
out of the generic MI424WR DTSI file and make it a property
of the respective variants instead.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20251211-ixp4xx-actiontec-dts-fix-v1-1-97af8e79d474@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"Three new SoCs got added in existing arm64 chip families:
- Renesas R-Car X5H (R8A78000) is a new generation of automotive
SoCs, based on 16 Cortex-A720 (Armv9.2) cores, which makes the the
currently highest-perforance embedded SoC.
- TI AM62L is a new variant of the AM62 family of industrial SoCs,
this one comes without a GPU.
- Qualcomm MSM8937 (Snapdragon 430) is an older mobile phone chip
based on Cortex-A53, and closely related to MSM8917 (Snapdragn
425), which we already support.
In addition, there are a good number of newly supported machines
across SoC families:
- Two Aspeed AST2600 (Cortex-A7) based BMC setups for large servers
- Mobile Phones and tables based on Mediatek MT6582, Nvidia Tegra124,
Qualcomm MSM8937 and Qualcomm MSM8939,
- Two Laptops based on Qualcomm SoCs: one using the older sdm850, the
other using x1p42100.
- One Router based on Rockchips RK3568
- 24 variants of the Enclustra Mercury system-on-module, all based on
32-bit Intel/Altera SocFPGA chips, plus two boards using 64-bit
SocFPGA Agilex chips..
- 30 industrial/embedded boards and single-board computers, using
various chips from NXP, Rockchips, Mediatek, TI, Amlogic, Qualcomm,
Spacemit, and Starfive.
In total there are 783 commits here, the majority of these improving
hardware support and cleaning up devicetree files across the tree,
with the majority of the changes going into the Qualcomm, NXP, Renesas
and Rockchips platforms"
* tag 'soc-dt-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (782 commits)
arm64: dts: mediatek: mt8195: Fix address range for JPEG decoder core 1
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
arm64: dts: amlogic: meson-g12b: Fix L2 cache reference for S922X CPUs
arm64: dts: Add gpio_intc node for Amlogic S7D SoCs
arm64: dts: Add gpio_intc node for Amlogic S7 SoCs
arm64: dts: Add gpio_intc node for Amlogic S6 SoCs
arm64: dts: amlogic: s7d: add ao secure node
arm64: dts: amlogic: s7: add ao secure node
arm64: dts: amlogic: s6: add ao secure node
arm64: dts: amlogic: Fix the register name of the 'DBI' region
dts: arm64: amlogic: add a5 pinctrl node
arm64: dts: amlogic: s7d: add power domain controller node
arm64: dts: amlogic: s7: add power domain controller node
arm64: dts: amlogic: s6: add power domain controller node
dts: arm64: amlogic: Add ISP related nodes for C3
arm64: dts: meson: add initial device-tree for Tanix TX9 Pro
dt-bindings: arm: amlogic: add support for Tanix TX9 Pro
...
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM changes for v6.19
Fix WiFi on Exynos4210 and Exynos4412 boards with Broadcom chip after
system suspend and resume, by using cap-power-off-card to power off the
WiFi during suspend.
* tag 'samsung-dt-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: samsung: exynos4412-midas: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-trats: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: exynos4210-i9100: turn off SDIO WLAN chip during system suspend
ARM: dts: samsung: universal_c210: turn off SDIO WLAN chip during system suspend
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
|
|
suspend
Commit 8c3170628a9c ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f77cbb9a3e5d ("ARM: dts: exynos: Add bcm4334 device node to Trats2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-5-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
suspend
Commit 8c3170628a9c ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: a19f6efc01df ("ARM: dts: exynos: Enable WLAN support for the Trats board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-4-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
suspend
Commit 8c3170628a9c ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-3-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Commit 8c3170628a9c ("wifi: brcmfmac: keep power during suspend if board
requires it") changed default behavior of the BRCMFMAC driver, which now
keeps SDIO card powered during system suspend to enable optional support
for WOWL. This feature is not supported by the legacy Exynos4 based
boards and leads to WLAN disfunction after system suspend/resume cycle.
Fix this by annotating SDIO host used by WLAN chip with
'cap-power-off-card' property, which should have been there from the
beginning.
Fixes: f1b0ffaa686f ("ARM: dts: exynos: Enable WLAN support for the UniversalC210 board")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20251126102618.3103517-2-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.18, 2nd round:
- Correct i.MX8DXL's pcie-ep interrupt number (Frank Li)
- Swap interrupt numbers of eqos for imx8dxl-ss-conn (Frank Li)
- Correct SAI3 interrupt line for i.MX6UL (Maarten Zanders)
- Correct mux-controller select/enable-gpios polarity for imx8qm-mek
board (Xu Yang)
* tag 'imx-fixes-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8qm-mek: fix mux-controller select/enable-gpios polarity
ARM: dts: nxp: imx6ul: correct SAI3 interrupt line
arm64: dts: imx8dxl-ss-conn: swap interrupts number of eqos
arm64: dts: imx8dxl: Correct pcie-ep interrupt number
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into soc/dt
mvebu dt64 for 6.19 (part 1)
pinctrl node names cleanup from Rob on Marvell device tree files
Proper fix for pci errors on armada cp11x based platforms
* tag 'mvebu-dt64-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
clk: mvebu: cp110 add CLK_IGNORE_UNUSED to pcie_x10, pcie_x11 & pcie_x4
Revert "arm64: dts: marvell: cn9132-clearfog: fix multi-lane pci x2 and x4 ports"
arm64/arm: dts: marvell: Rename "nand-rb" pinctrl node names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.19, round 1
Highlights:
-----------
- MPU:
- STM32MP13:
- Add and enable the ARM SMC watchdog to use IWDG1 in the secure
world.
- STMP32MP15:
- Phytec SOM: Fix STMPE811 touchscreen
- LXA: drop unnecessary vusb_d/a-supply as already defined by
"phy-supply" and "vdda1v8-supply".
- STM32MP23:
- Use the RIFSC as an access controler (firewall) as it is done
for STM32MP25 and STM32MP23.
- STM32MP25:
- Add OSPI memory region name.
- Add I/O synchronization properties to satisfy RGMII
specification.
* tag 'stm32-dt-for-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: set RIFSC as an access controller on stm32mp21x platforms
ARM: dts: stm32: add the IWDG2 interrupt line in stm32mp131.dtsi
ARM: dts: stm32: enable the ARM SMC watchdog node in stm32mp135f-dk
ARM: dts: stm32: add the ARM SMC watchdog in stm32mp131.dtsi
ARM: dts: stm32: add iwdg1 node in stm32mp131.dtsi
arm64: dts: st: Add I/O sync to eth pinctrl in stm32mp25-pinctrl.dtsi
arm64: dts: st: Add memory-region-names property for stm32mp257f-ev1
ARM: dts: stm32: lxa: drop unnecessary vusb_d/a-supply
ARM: dts: stm32: stm32mp157c-phycore: Fix STMPE811 touchscreen node properties
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
A number of cleanups for older socs.
* tag 'v6.19-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: move edp assigned-clocks to edp node on rk3288
ARM: dts: rockchip: Add spi_flash label to rk3288-veyron
ARM: dts: rockchip: Remove mshc aliases from RK3288
ARM: dts: rockchip: Adapt tps65910 nodes on RK3066 boards
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.19
In addition to a variety of cleanups and reordering of nodes, four GSBIs
are added to the MSM8960 platform.
On the MSM8226-based Samsung Galaxy Grand 2, a simple framebuffer is
defined.
* tag 'qcom-arm32-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
ARM: dts: qcom: msm8226-samsung-ms013g: add simple-framebuffer
ARM: dts: qcom: msm8960: rename msmgpio node to tlmm
ARM: dts: qcom: msm8960: add I2C nodes for gsbi1 and gsbi8
ARM: dts: qcom: msm8960: add I2C nodes for gsbi10 and gsbi12
ARM: dts: qcom: msm8960: inline qcom-msm8960-pins.dtsi
ARM: dts: qcom: msm8960: reorder nodes and properties
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/dt
Misc. DT updates, mostly for AM3 platforms.
* tag 'omap-for-v6.19/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ARM: dts: ti/omap: fix incorrect compatible string in internal eeprom node
ARM: dts: omap: am335x-mba335x: Fix stray '/*' in comment
ARM: dts: omap: am335x-tqma335x/mba335x: Fix MicIn routing
dt-bindings: mmc: ti,omap2430-sdhci: convert to DT schema
arm: dts: ti: omap: Drop unnecessary properties for SDHCI node
arm: dts: ti: omap: am335x-pepper: Fix vmmc-supply property typo
ARM: dts: omap3: n900: Correct obsolete TWL4030 power compatible
ARM: dts: omap3: beagle-xm: Correct obsolete TWL4030 power compatible
ARM: dts: omap: Add support for TQMa335x/MBa335x
ARM: dts: omap: AM33xx: add cpu label
dt-bindings: omap: add AM335x-based TQMa335x SOM and MBa335x board
ARM: dts: am335x-netcom-plus-2xx: add missing GPIO labels
ARM: dts: ti: omap: am335x-baltos: add a regulator for the mPCIe slot
ARM: dts: omap: rework Baltos LED nodes
ARM: dts: am33xx: Add missing serial console speed
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.19
This update includes:
- FIFO size fixes for some Flexcom UARTs and SPIs
* tag 'at91-dt-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sama5d2: fix spi flexcom fifo size to 32
ARM: dts: microchip: sama7g5: fix uart fifo size to 32
ARM: dts: microchip: sama7d65: fix uart fifo size to 32
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.19
- Add 4-bit SPI bus width(n5x, stratix10, agilex and agilex5)
- Agilex5 updates:
- Add GMAC0 for NAND daughter card
- Add SMMU support
- Add VGIC maintenance interrupt
- Add L2 and L3 cache
- Add support for the 013b board
- Add I3C support
- Add support for the Enclustra Mercury+ SA1 SoM based on Cyclone5
- Add support for Agilex3 board(a variant of the Agilex5 board)
- dt-bindings update:
- Document iommu in cdns,hp-nfc, snps,dw-axi-dmac and Agilex5
- Document Enclustra Mercury SA1 and AA1 boards
- Document Agilex5 013b board
- Document Agilex3 board
- Fix dtbs_check warnings:
- stratix10-swvp
- Agilex(NAND and Clock manager)
- Move sdmmc-ecc to base DTSI file(Stratix10)
* tag 'socfpga_dts_updates_for_v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: (35 commits)
arm64: dts: socfpga: agilex5: update qspi partitions for 013b board
arm64: dts: socfpga: add Agilex3 board
dt-bindings: intel: Add Agilex3 SoCFPGA board
arm64: dts: intel: agilex5: Add Altera compatible for I3C controllers
arm64: dts: socfpga: Add Agilex5 SVC node with memory region
dt-bindings: firmware: svc: Add IOMMU support for Agilex5
arm64: dts: socfpga: agilex5: Add SMMU-V3-PMCG nodes
arm64: dts: socfpga: agilex5: Add L2 and L3 cache
arm64: dts: socfpga: agilex5: fix CHECK_DTBS warning for NAND
arm64: dts: socfpga: agilex5: add support for 013b board
dt-bindings: intel: Add Agilex5 SoCFPGA 013b board
arm64: dts: socfpga: agilex5: add VGIC maintenance interrupt
arm64: dts: socfpga: agilex: fix dtbs_check warning for NAND
arm64: dts: socfpga: agilex: fix dtbs_check warning for clock manager
arm64: dts: socfpga: stratix10-swvp: fix dtbs_check warnings swvp
arm64: dts: socfpga: move sdmmc-ecc to the base DTSI file
ARM: dts: socfpga: add Enclustra SoM dts files
dt-bindings: altera: removal of generic PE1 dts
ARM: dts: socfpga: removal of generic PE1 dts
dt-bindings: altera: add Mercury AA1 variants
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.19:
- A bunch of dt-schema warning cleanup patches from Frank Li
- A couple of imx6dl-yapp4 board update from Michal Vokáč to enable
pwm-beeper and model the RGB LED as a single multi-led part
- Enable PMIC RTC on imx53-qsrb board
- Correct rtc compatible for imx6q-evi board
- Add sy7636 support for e70k02 board
- Replace license text comment with SPDX identifier for imx53-usbarmory
board
- Add I2S audio support for imx28-amarula-rmm board
* tag 'imx-dt-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (29 commits)
ARM: dts: imx6qdl: make VAR-SOM SoM SoC-agnostic
ARM: dts: imx6dl-yapp4: Model the RGB LED as a single multi-led part
ARM: dts: imx6dl-yapp43: Enable pwm-beeper on boards with speaker
ARM: dts: imx: e70k02: add sy7636
ARM: dts: imx28-amarula-rmm: add I2S audio
ARM: dts: imx: add vdd-supply and vddio-supply for fsl,mpl3115
ARM: dts: imx7ulp: remove bias-pull-up
ARM: dts: remove undocumented clock-names for ov5642
ARM: dts: add device_type for memory node
ARM: dts: Add bus type for parallel ov5640
ARM: dts: imx6q-cm-fx6.dts: add supplies for wm8731
ARM: dts: imx6qdl-skov-cpu fix typo interrupt
ARM: dts: imx: remove redundant linux,phandle
ARM: dts: imx6ull-dhcom-pdk2: rename power-supply to vcc-supply for touchscreen
ARM: dts: imx: add power-supply for lcd panel
ARM: dts: imx6qdl-nitrogen6_max: rename i2c<n>mux to i2c
ARM: dts: imx6ull-phytec-tauri: remove extra space before jedec,spi-nor
ARM: dts: imx6q-utilite-pro: add missing required property for pci
ARM: dts: imx6-tbs2910: rename ir_recv to ir-receiver
ARM: dts: imx6: remove pinctrl-name if pinctrl-0 doesn't exist
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.19-rc1
Add more host1x devices on Tegra114 and Tegra124, as well as CSI for
Tegra20 and Tegra30. Support for the Xiaomi Mi Pad is also added.
* tag 'tegra-for-6.19-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Add device-tree for Xiaomi Mi Pad (A0101)
ARM: tegra: add CSI nodes for Tegra20 and Tegra30
ARM: tegra: Add missing HOST1X device nodes on Tegra124
ARM: tegra: Add missing HOST1X device nodes on Tegra114
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.19 (take two)
- Add Imagination Technologies PowerVR Series 7XE GE7800 GPU support
for the R-Car M3-N and V3U SoCs,
- Add Ethernet support for the RZ/T2H and RZ/N2H SoCs and their
evaluation boards,
- Add ADC support for the RZ/N1D SoC,
- Add thermal, NMI pushbutton, and RTC support for the RZ/V2H SoC and
the RZ/V2H EVK development board,
- Add USB2.0 support for the RZ/G3S SoC and the RZ/G3S SMARC Carrier
II board.
* tag 'renesas-dts-for-v6.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzt2h-n2h-evk: Enable Ethernet support
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable RTC
arm64: dts: renesas: r9a09g057: Add RTC node
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Add NMI pushbutton support
arm64: dts: renesas: rzg3s-smarc: Enable USB support
arm64: dts: renesas: r9a08g045: Add USB support
arm64: dts: renesas: r9a09g057: Add TSU nodes
ARM: dts: renesas: r9a06g032: Add the ADC device
arm64: dts: renesas: r9a09g087: Add GMAC nodes
arm64: dts: renesas: r9a09g077: Add GMAC nodes
arm64: dts: renesas: r9a09g087: Add ETHSS node
arm64: dts: renesas: r9a09g077: Add ETHSS node
arm64: dts: renesas: r8a779a0: Add GE7800 GPU node
arm64: dts: renesas: r8a77965: Add GE7800 GPU node
dt-bindings: clock: r8a779a0: Add ZG core clock
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM32 Device Tree updates
This performs a cleanup of the MT6582 devicetrees and adds support
for secondary cores bringup on this SoC.
This also introduces basic support for a new machine, the MT6582
Alcatel "yarisxl" Pop C7 (OT-7041D) smartphone, with support for
booting into a initramfs with UART console output.
* tag 'mtk-dts32-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
ARM: dts: mediatek: drop wrong syscon hifsys compatible for MT2701/7623
ARM: dts: mediatek: add basic support for Alcatel yarisxl board
dt-bindings: arm: mediatek: Add MT6582 yarisxl
ARM: dts: mediatek: mt6582: add enable-method property to cpus
ARM: dts: mediatek: mt6582: add clock-names property to uart nodes
ARM: dts: mediatek: mt6582: add mt6582 compatible to timer
ARM: dts: mediatek: mt6582: remove compatible property from root node
ARM: dts: mediatek: mt6582: sort nodes and properties
ARM: dts: mediatek: mt6582: move MMIO devices under soc node
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.19
- Add thermal support for the RZ/G3S and RZ/G3E SoCs,
- Add DT overlay support for the Raspberry Pi Display 2 and Argon40
fan hats on the Retronix Sparrow Hawk board,
- Add eMMC support for the Eagle Function expansion board,
- Add initial support for the R-Car X5H (R8A78000) SoC and the
Ironhide development board,
- Move interrupt-parent properties to root nodes,
- Add system watchdog timer support for R-Car Gen3 and Gen4 SoCs,
which is reserved for secure firmware on R-Car Gen3 boards,
- Add ADC support for the RZ/T2H and RZ/N2H SoCs and their evaluation
boards,
- Add watchdog timer support on the R-Car V3M Starter Kit board,
- Add Cortex-A55 PMU support on the RZ/V2H, RZ/V2N, RZ/T2H, and RZ/N2H
SoCs,
- Add Imagination Technologies PowerVR Series 6XT GX6250 GPU support
on the R-Car M3-W and M3-W+ SoCs,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (80 commits)
arm64: dts: renesas: sparrow-hawk: Fix full-size DP connector node name and labels
arm64: dts: renesas: r8a77961: Add GX6250 GPU node
arm64: dts: renesas: r8a77960: Add GX6250 GPU node
ARM: dts: renesas: kzm9g: Name interrupts for accelerometer
arm64: dts: renesas: r9a09g087: Add Cortex-A55 PMU node
arm64: dts: renesas: r9a09g077: Add Cortex-A55 PMU node
arm64: dts: renesas: r9a09g056: Add Cortex-A55 PMU node
arm64: dts: renesas: r9a09g057: Add Cortex-A55 PMU node
ARM: dts: renesas: r9a06g032-rzn1d400-db: Drop invalid #cells properties
arm64: dts: renesas: v3msk: Enable watchdog timer
arm64: dts: renesas: r8a779h0: Add SWDT node
arm64: dts: renesas: r8a779g0: Add SWDT node
arm64: dts: renesas: r8a779f0: Add SWDT node
arm64: dts: renesas: r8a779a0: Add SWDT node
arm64: dts: renesas: rzt2h/rzn2h-evk: Enable ADCs
arm64: dts: renesas: r9a09g087: Add ADCs support
arm64: dts: renesas: r9a09g077: Add ADCs support
ARM: dts: renesas: koelsch: Update ADV7180 binding
ARM: dts: renesas: r9a06g032: Move interrupt-parent to root node
ARM: dts: renesas: r8a7794: Move interrupt-parent to root node
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into soc/dt
First batch of ASPEED Arm devicetree changes for 6.19
Significant changes:
- The IBM Power11 FSI DTSIs have been rearranged to accommodate new systems
New platforms:
- IBM Balcones
The Balcones system is similar to Bonnell but with a POWER11 processor.
Like POWER10, the POWER11 is a dual-chip module, so a dual chip FSI
tree is needed.
- Meta Yosemite5
The Yosemite5 platform provides monitoring of voltages, power,
temperatures, and other critical parameters across the motherboard,
CXL board, E1.S expansion board, and NIC components.
Updated platforms:
- clemente (Meta): LEDs, shunt resistor configuration
- santabarbara (Meta): AMD APML, EEPROMs, LEDs, GPIO line names, MCTP for NICs
There are a scattering of one-off changes and devicetree cleanups for other
platforms as well.
* tag 'aspeed-6.19-devicetree-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: dts: aspeed: santabarbara: Add eeprom device node for PRoT module
ARM: dts: aspeed: santabarbara: Add AMD APML interface support
ARM: dts: aspeed: santabarbara: Add gpio line name
ARM: dts: aspeed: santabarbara: Add bmc_ready_noled Led
ARM: dts: aspeed: santabarbara: Enable MCTP for frontend NIC
ARM: dts: aspeed: santabarbara: Add sensor support for extension boards
ARM: dts: aspeed: santabarbara: Add blank lines between nodes for readability
ARM: dts: aspeed: yosemite5: Add Meta Yosemite5 BMC
dt-bindings: arm: aspeed: add Meta Yosemite5 board
ARM: dts: aspeed: clemente: Add HDD LED GPIO
ARM: dts: aspeed: Fix max31785 fan properties
ARM: dts: aspeed: Add Balcones system
dt-bindings: arm: aspeed: add IBM Bonnell board
dt-bindings: arm: aspeed: add IBM Balcones board
ARM: dts: aspeed: harma: Add MCTP I2C controller node
ARM: dts: aspeed: yosemite4: allocate ramoops for kernel panic
ARM: dts: aspeed: clemente: add shunt-resistor-micro-ohms for LM5066i
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Linux 6.18-rc6
Backmerge in order to merge msm next
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Make SoM .dtsi SoC-agnostic by moving SoC include to board level
imx6qdl-var-som.dtsi currently includes imx6q.dtsi, which makes this SoM
description Quad/Dual specific and prevents reuse from i.MX6DL boards.
Changes:
- Move imx6q.dtsi include from imx6qdl-var-som.dtsi to
imx6q-var-mx6customboard.dts.
- Remove /dts-v1/; from imx6qdl-var-som.dtsi (dtsi files should not declare
version)
This keeps the SoM .dtsi SoC-agnostic (it already relies on imx6qdl.dtsi for
family-common parts) and allows boards using the DualLite or Solo to include
imx6dl.dtsi instead.
Why this is needed:
To reuse imx6qdl-var-som.dtsi on i.MX6DL board.
No functional changes for imx6q-var-mx6customboard are intended.
Signed-off-by: Stefan Prisacariu <stefan.prisacariu@prevas.dk>
Link: https://lore.kernel.org/all/20250925104942.4148376-1-stefan.prisacariu@prevas.dk/
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Describe the RGB LED indicator according to the reality - it is a single
part containing all the three R,G and B LEDs in one package.
With this description the chan-name property becomes useless, remove it.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Lynx, Pegasus and Pegasus+ boards have a speaker connected to the PWM3.
Enable a pwm-beeper on these boards so the system can produce simple
sounds.
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the EPD PMIC for the e70k02 based devices as a step towards full EPD
support.
Acked-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Andreas Kemnade <akemnade@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add support for I2S audio on Amarula rmm board. Audio codec
TLV320AIC3X is connected as slave to SAIF0, which provides
bitclock, frame and MCLK.
Co-developed-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Unlike standalone spi peripherals, on sama5d2, the flexcom spi have fifo
size of 32 data. Fix flexcom/spi nodes where this property is wrong.
Fixes: 6b9a3584c7ed ("ARM: dts: at91: sama5d2: Add missing flexcom definitions")
Cc: stable@vger.kernel.org # 5.8+
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20251114140225.30372-1-nicolas.ferre@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree files updates
for 6.18, please pull the following:
- Rafal fixes the Ethernet PHY address on the Luxul XAP-1440
* tag 'arm-soc/for-6.18/devicetree-fixes-part2' of https://github.com/Broadcom/stblinux:
ARM: dts: BCM53573: Fix address of Luxul XAP-1440's Ethernet PHY
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.18:
- Enable ext4 support explicitly in imx_v6_v7_defconfig to fix a regression
caused by commit d6ace46c82fd ("ext4: remove obsolete EXT3 config options")
- Correct report-rate-hz setting for imx6ull-engicam-microgea-rmm board
- Fix MSI mapping for i.MX95 PCIe endpoint device nodes
- Fix USB OTG role switching for imx8mp-kontron board
- Fix a dt-schema warning caused by audmux node for imx51-zii-rdu1 board
- Avoid gpio0_mipi_csi GPIOs being deferred for i.MX8 img subsystem
* tag 'imx-fixes-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-kontron: Fix USB OTG role switching
arm64: dts: imx95: Fix MSI mapping for PCIe endpoint nodes
arm64: dts: imx8-ss-img: Avoid gpio0_mipi_csi GPIOs being deferred
arm: imx_v6_v7_defconfig: enable ext4 directly
ARM: dts: imx51-zii-rdu1: Fix audmux node names
ARM: dts: imx6ull-engicam-microgea-rmm: fix report-rate-hz value
Signed-off- |
