| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha
Pull alpha updates from Magnus Lindholm:
"One fix to silence pgprot_modify() compiler warnings, and one patch
adding SECCOMP/SECCOMP_FILTER support together with the syscall and
ptrace fixes needed for it"
* tag 'alpha-for-v7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/lindholm/alpha:
alpha: Define pgprot_modify to silence tautological comparison warnings
alpha: add support for SECCOMP and SECCOMP_FILTER
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
|
|
Add SECCOMP and SECCOMP_FILTER support to the Alpha architecture and fix
syscall entry and ptrace issues uncovered by the seccomp-bpf selftests.
The syscall entry path is reworked to consistently track syscall state
using r0, r1 and r2:
- r1 holds the active syscall number
- r2 preserves the original syscall number for restart
- r0 carries the return value, with r19 (a3) indicating success/error
This allows syscall restarts to be permitted only for valid ERESTART*
return codes and prevents kernel-internal restart values from leaking to
userspace. The syscall tracing error marker is corrected to use the saved
syscall number slot, matching the Alpha ABI.
Additionally, implement minimal PTRACE_GETREGSET and PTRACE_SETREGSET
support for NT_PRSTATUS, exporting struct pt_regs directly. This fixes
ptrace-based seccomp tests that previously failed with -EIO.
With these changes, seccomp-bpf and ptrace syscall tests pass reliably on
Alpha.
Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
Link: https://lore.kernel.org/r/20260409171439.8759-2-linmag7@gmail.com
Signed-off-by: Magnus Lindholm <linmag7@gmail.com>
|
|
__find_resource_space() calculates the full extent of empty space but only
passes the aligned space to resource_alignf callback. In some situations,
the callback may choose take advantage of the free space before the
requested alignment.
Pass the full extent of the calculated empty space to resource_alignf
callback as an additional parameter.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Xifer <xiferdev@gmail.com>
Link: https://patch.msgid.link/20260324165633.4583-3-ilpo.jarvinen@linux.intel.com
|
|
Commit 3e86e4d74c04 ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].
Commit ddc6cbef3ef1 ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f21091358 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.
Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c04 ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Scheduler Kconfig space updates:
- Further consolidate configurable preemption modes (Peter Zijlstra)
Reduce the number of architectures that are allowed to offer
PREEMPT_NONE and PREEMPT_VOLUNTARY, reducing the number of
preemption models from four to just two: 'full' and 'lazy' on
up-to-date architectures (arm64, loongarch, powerpc, riscv, s390,
x86).
None and voluntary are only available as legacy features on
platforms that don't implement lazy preemption yet, or which don't
even support preemption.
The goal is to eventually remove cond_resched() and voluntary
preemption altogether.
RSEQ based 'scheduler time slice extension' support (Thomas Gleixner
and Peter Zijlstra):
This allows a thread to request a time slice extension when it enters
a critical section to avoid contention on a resource when the thread
is scheduled out inside of the critical section.
- Add fields and constants for time slice extension
- Provide static branch for time slice extensions
- Add statistics for time slice extensions
- Add prctl() to enable time slice extensions
- Implement sys_rseq_slice_yield()
- Implement syscall entry work for time slice extensions
- Implement time slice extension enforcement timer
- Reset slice extension when scheduled
- Implement rseq_grant_slice_extension()
- entry: Hook up rseq time slice extension
- selftests: Implement time slice extension test
- Allow registering RSEQ with slice extension
- Move slice_ext_nsec to debugfs
- Lower default slice extension
- selftests/rseq: Add rseq slice histogram script
Scheduler performance/scalability improvements:
- Update rq->avg_idle when a task is moved to an idle CPU, which
improves the scalability of various workloads (Shubhang Kaushik)
- Reorder fields in 'struct rq' for better caching (Blake Jones)
- Fair scheduler SMP NOHZ balancing code speedups (Shrikanth Hegde):
- Move checking for nohz cpus after time check
- Change likelyhood of nohz.nr_cpus
- Remove nohz.nr_cpus and use weight of cpumask instead
- Avoid false sharing for sched_clock_irqtime (Wangyang Guo)
- Cleanups (Yury Norov):
- Drop useless cpumask_empty() in find_energy_efficient_cpu()
- Simplify task_numa_find_cpu()
- Use cpumask_weight_and() in sched_balance_find_dst_group()
DL scheduler updates:
- Add a deadline server for sched_ext tasks (by Andrea Righi and Joel
Fernandes, with fixes by Peter Zijlstra)
RT scheduler updates:
- Skip currently executing CPU in rto_next_cpu() (Chen Jinghuang)
Entry code updates and performance improvements (Jinjie Ruan)
This is part of the scheduler tree in this cycle due to inter-
dependencies with the RSEQ based time slice extension work:
- Remove unused syscall argument from syscall_trace_enter()
- Rework syscall_exit_to_user_mode_work() for architecture reuse
- Add arch_ptrace_report_syscall_entry/exit()
- Inline syscall_exit_work() and syscall_trace_enter()
Scheduler core updates (Peter Zijlstra):
- Rework sched_class::wakeup_preempt() and rq_modified_*()
- Avoid rq->lock bouncing in sched_balance_newidle()
- Rename rcu_dereference_check_sched_domain() =>
rcu_dereference_sched_domain()
- <linux/compiler_types.h>: Add the __signed_scalar_typeof() helper
Fair scheduler updates/refactoring (Peter Zijlstra and Ingo Molnar):
- Fold the sched_avg update
- Change rcu_dereference_check_sched_domain() to rcu-sched
- Switch to rcu_dereference_all()
- Remove superfluous rcu_read_lock()
- Limit hrtick work
- Join two #ifdef CONFIG_FAIR_GROUP_SCHED blocks
- Clean up comments in 'struct cfs_rq'
- Separate se->vlag from se->vprot
- Rename cfs_rq::avg_load to cfs_rq::sum_weight
- Rename cfs_rq::avg_vruntime to ::sum_w_vruntime & helper functions
- Introduce and use the vruntime_cmp() and vruntime_op() wrappers for
wrapped-signed aritmetics
- Sort out 'blocked_load*' namespace noise
Scheduler debugging code updates:
- Export hidden tracepoints to modules (Gabriele Monaco)
- Convert copy_from_user() + kstrtouint() to kstrtouint_from_user()
(Fushuai Wang)
- Add assertions to QUEUE_CLASS (Peter Zijlstra)
- hrtimer: Fix tracing oddity (Thomas Gleixner)
Misc fixes and cleanups:
- Re-evaluate scheduling when migrating queued tasks out of throttled
cgroups (Zicheng Qu)
- Remove task_struct->faults_disabled_mapping (Christoph Hellwig)
- Fix math notation errors in avg_vruntime comment (Zhan Xusheng)
- sched/cpufreq: Use %pe format for PTR_ERR() printing
(zenghongling)"
* tag 'sched-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
sched: Re-evaluate scheduling when migrating queued tasks out of throttled cgroups
sched/cpufreq: Use %pe format for PTR_ERR() printing
sched/rt: Skip currently executing CPU in rto_next_cpu()
sched/clock: Avoid false sharing for sched_clock_irqtime
selftests/sched_ext: Add test for DL server total_bw consistency
selftests/sched_ext: Add test for sched_ext dl_server
sched/debug: Fix dl_server (re)start conditions
sched/debug: Add support to change sched_ext server params
sched_ext: Add a DL server for sched_ext tasks
sched/debug: Stop and start server based on if it was active
sched/debug: Fix updating of ppos on server write ops
sched/deadline: Clear the defer params
entry: Inline syscall_exit_work() and syscall_trace_enter()
entry: Add arch_ptrace_report_syscall_entry/exit()
entry: Rework syscall_exit_to_user_mode_work() for architecture reuse
entry: Remove unused syscall argument from syscall_trace_enter()
sched: remove task_struct->faults_disabled_mapping
sched: Update rq->avg_idle when a task is moved to an idle CPU
selftests/rseq: Add rseq slice histogram script
hrtimer: Fix trace oddity
...
|
|
Every architecture calls sparse_init() during setup_arch() although the
data structures created by sparse_init() are not used until the
initialization of the core MM.
Beside the code duplication, calling sparse_init() from architecture
specific code causes ordering differences of vmemmap and HVO
initialization on different architectures.
Move the call to sparse_init() from architecture specific code to
free_area_init() to ensure that vmemmap and HVO initialization order is
always the same.
Link: https://lkml.kernel.org/r/20260111082105.290734-25-rppt@kernel.org
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Alex Shi <alexs@kernel.org>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "Borislav Petkov (AMD)" <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Magnus Lindholm <linmag7@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Provide a new syscall which has the only purpose to yield the CPU after the
kernel granted a time slice extension.
sched_yield() is not suitable for that because it unconditionally
schedules, but the end of the time slice extension is not required to
schedule when the task was already preempted. This also allows to have a
strict check for termination to catch user space invoking random syscalls
including sched_yield() from a time slice extension region.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20251215155708.929634896@linutronix.de
|
|
... same as native mount(2) is doing for devname argument. While we
are at it, fix misspelling ufs_args as cdfs_args in osf_ufs_mount() -
layouts are identical, so it doesn't change anything, but the current
variant is confusing for no reason.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping updates from Marek Szyprowski:
- More DMA mapping API refactoring to physical addresses as the primary
interface instead of page+offset parameters.
This time dma_map_ops callbacks are converted to physical addresses,
what in turn results also in some simplification of architecture
specific code (Leon Romanovsky and Jason Gunthorpe)
- Clarify that dma_map_benchmark is not a kernel self-test, but
standalone tool (Qinxin Xia)
* tag 'dma-mapping-6.19-2025-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-mapping: remove unused map_page callback
xen: swiotlb: Convert mapping routine to rely on physical address
x86: Use physical address for DMA mapping
sparc: Use physical address DMA mapping
powerpc: Convert to physical address DMA mapping
parisc: Convert DMA map_page to map_phys interface
MIPS/jazzdma: Provide physical address directly
alpha: Convert mapping routine to rely on physical address
dma-mapping: remove unused mapping resource callbacks
xen: swiotlb: Switch to physical address mapping callbacks
ARM: dma-mapping: Switch to physical address mapping callbacks
ARM: dma-mapping: Reduce struct page exposure in arch_sync_dma*()
dma-mapping: convert dummy ops to physical address mapping
dma-mapping: prepare dma_map_ops to conversion to physical address
tools/dma: move dma_map_benchmark from selftests to tools/dma
|
|
Add the listns() system call to all architectures.
Link: https://patch.msgid.link/20251029-work-namespace-nstree-listns-v4-20-2e6f823ebdc0@kernel.org
Tested-by: syzbot@syzkaller.appspotmail.com
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Alpha doesn't need struct *page and can perform mapping based on
physical addresses. So convert it to implement new .map_phys callback.
As part of this change, remove useless BUG_ON() as DMA mapping layer
ensures that right direction is provided.
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251015-remove-map-page-v5-7-3bbfe3a25cdf@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core scheduler changes:
- Make migrate_{en,dis}able() inline, to improve performance
(Menglong Dong)
- Move STDL_INIT() functions out-of-line (Peter Zijlstra)
- Unify the SCHED_{SMT,CLUSTER,MC} Kconfig (Peter Zijlstra)
Fair scheduling:
- Defer throttling to when tasks exit to user-space, to reduce the
chance & impact of throttle-preemption with held locks and other
resources (Aaron Lu, Valentin Schneider)
- Get rid of sched_domains_curr_level hack for tl->cpumask(), as the
warning was getting triggered on certain topologies (Peter
Zijlstra)
Misc cleanups & fixes:
- Header cleanups (Menglong Dong)
- Fix race in push_dl_task() (Harshit Agarwal)"
* tag 'sched-core-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix some typos in include/linux/preempt.h
sched: Make migrate_{en,dis}able() inline
rcu: Replace preempt.h with sched.h in include/linux/rcupdate.h
arch: Add the macro COMPILE_OFFSETS to all the asm-offsets.c
sched/fair: Do not balance task to a throttled cfs_rq
sched/fair: Do not special case tasks in throttled hierarchy
sched/fair: update_cfs_group() for throttled cfs_rqs
sched/fair: Propagate load for throttled cfs_rq
sched/fair: Get rid of throttled_lb_pair()
sched/fair: Task based throttle time accounting
sched/fair: Switch to task based throttle model
sched/fair: Implement throttle task work and related helpers
sched/fair: Add related data structure for task based throttle
sched: Unify the SCHED_{SMT,CLUSTER,MC} Kconfig
sched: Move STDL_INIT() functions out-of-line
sched/fair: Get rid of sched_domains_curr_level hack for tl->cpumask()
sched/deadline: Fix race in push_dl_task()
|
|
The include/generated/asm-offsets.h is generated in Kbuild during
compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to
generate another similar offset header file, circular dependency can
happen.
For example, we want to generate a offset file include/generated/test.h,
which is included in include/sched/sched.h. If we generate asm-offsets.h
first, it will fail, as include/sched/sched.h is included in asm-offsets.c
and include/generated/test.h doesn't exist; If we generate test.h first,
it can't success neither, as include/generated/asm-offsets.h is included
by it.
In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular
dependency. We can generate asm-offsets.h first, and if the
COMPILE_OFFSETS is defined, we don't include the "generated/test.h".
And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this
purpose.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
|
|
With the introduction of clone3 in commit 7f192e3cd316 ("fork: add
clone3") the effective bit width of clone_flags on all architectures was
increased from 32-bit to 64-bit, with a new type of u64 for the flags.
However, for most consumers of clone_flags the interface was not
changed from the previous type of unsigned long.
While this works fine as long as none of the new 64-bit flag bits
(CLONE_CLEAR_SIGHAND and CLONE_INTO_CGROUP) are evaluated, this is still
undesirable in terms of the principle of least surprise.
Thus, this commit fixes all relevant interfaces of the copy_thread
function that is called from copy_process to consistently pass
clone_flags as u64, so that no truncation to 32-bit integers occurs on
32-bit architectures.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Link: https://lore.kernel.org/20250901-nios2-implement-clone3-v2-3-53fcf5577d57@siemens-energy.com
Fixes: c5febea0956fd387 ("fork: Pass struct kernel_clone_args into copy_thread")
Acked-by: Guo Ren (Alibaba Damo Academy) <guoren@kernel.org>
Acked-by: Andreas Larsson <andreas@gaisler.com> # sparc
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
|
|
Replace sprintf() with the safer variant scnprintf() and use its return
value instead of calculating the string length again using strlen().
Use strscpy() instead of the deprecated strcpy().
No functional changes intended.
Link: https://github.com/KSPP/linux/issues/88
Link: https://lkml.kernel.org/r/20250521121840.5653-1-thorsten.blum@linux.dev
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: guoweikang <guoweikang.kernel@gmail.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce file_getattr() and file_setattr() syscalls to manipulate inode
extended attributes. The syscalls takes pair of file descriptor and
pathname. Then it operates on inode opened accroding to openat()
semantics. The struct file_attr is passed to obtain/change extended
attributes.
This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference
that file don't need to be open as we can reference it with a path
instead of fd. By having this we can manipulated inode extended
attributes not only on regular files but also on special ones. This
is not possible with FS_IOC_FSSETXATTR ioctl as with special files
we can not call ioctl() directly on the filesystem inode using fd.
This patch adds two new syscalls which allows userspace to get/set
extended inode attributes on special files by using parent directory
and a path - *at() like syscall.
CC: linux-api@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: linux-xfs@vger.kernel.org
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
|
|
The extra-y syntax is deprecated. Instead, use always-$(KBUILD_BUILTIN),
which behaves equivalently.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
|
|
The throttle support has been added in the generic code. Remove
the driver-specific throttle support.
Besides the throttle, perf_event_overflow may return true because of
event_limit. It already does an inatomic event disable. The pmu->stop
is not required either.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250520181644.2673067-11-kan.liang@linux.intel.com
|
|
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
serial: stm32: do not deassert RS485 RTS GPIO prematurely
serial: 8250: add driver for NI UARTs
dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
serial: icom: fix |
