| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The user cannot use MTE on VMAs created by mapping a guest_memfd file,
as arch_calc_vm_flag_bits() does not set VM_MTE_ALLOWED.
When creating a guest_memfd backed memslot,
kvm_arch_prepare_memory_region() rejects the memslot if MTE is enabled for
the VM and if guest_memfd has been mapped in a VMA that intersects the
memslot.
However, the documentation for KVM_SET_USER_MEMORY_REGION2 explicitly
states that the only condition for userspace_addr is for it to be a legal
userspace address, but the mapping is not required to be valid nor
populated at memslot creation.
If userspace sets userspace_addr to an address that hasn't been mapped, or
if userspace_addr belongs to a VMA that isn't backed by the guest_memfd
file, or if the VMA doesn't intersect the memslot, memslot creation is
successful and KVM ends up with a VM with MTE and guest_memfd-backed
memslots.
The same happens if the order is reversed: when userspace enables MTE, KVM
does not check if memslots backed by guest_memfd are already present.
Fix both issues by rejecting guest_memfd-backed memslots when MTE is
enabled, and by rejecting MTE when guest_memfd-backed memslots are already
present.
Fixes: 32e200bd6e44 ("KVM: arm64: Enable support for guest_memfd backed memory")
Tested-by: Fuad Tabba <fuad.tabba@linux.dev>
Reviewed-by: Fuad Tabba <fuad.tabba@linux.dev>
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://patch.msgid.link/20260722090354.94245-1-alexandru.elisei@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
* Fix S390_USER_OPEREXEC so it can now be enabled regardless of other
unrelated capabilities
* Fix handling of the _PAGE_UNUSED pte bit that could lead to guest
memory corruption in some scenarios
* A bunch of misc gmap fixes (locking, behaviour under memory pressure)
* Fix CMMA dirty tracking
|
|
Small typo noticed while writing the USER_OPEREXEC selftest.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260507200836.3500368-4-farman@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: New features for 7.2
New features for 7.2 for KVM/s390:
* KVM_PRE_FAULT_MEMORY support
* Support for 2G hugepages
* Support for the ASTFLEIE 2 facility
* kvm_arch_set_irq_inatomic Fast Inject
* Fix potential leak of uninitialized bytes
|
|
KVM SVM changes for 7.2
- Add support for virtualizing gPAT (KVM previously just used L1's PAT when
running L2).
- Fix goofs where KVM mishandles side effects (e.g. single-step and PMC
updates) when emulating VMRUN.
- Fix a variety of bugs in AVIC's handling of x2APIC MSR interception, most
notably where KVM didn't disable interception of IRR, ISR, and TMR regs.
- Add support for virtualizing Host-Only/Guest-Only bits in the mediated PMU.
|
|
Document the KVM_CAP_S390_HPAGE_2G capability, which behaves very
similarly to the existing KVM_CAP_S390_HPAGE_1M.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260609150930.665370-5-imbrenda@linux.ibm.com>
|
|
KVM has reflected KVM_X86_SNP_VM to userspace since 1dfe571c12cf
("KVM: SEV: Add initial SEV-SNP support"), and KVM_X86_TDX_VM since
161d34609f9b ("KVM: TDX: Make TDX VM type supported"). Update the
documentation to reflect this fact.
Fixes: 1dfe571c12cf ("KVM: SEV: Add initial SEV-SNP support")
Fixes: 161d34609f9b ("KVM: TDX: Make TDX VM type supported")
Signed-off-by: Carlos López <clopez@suse.de>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Link: https://patch.msgid.link/20260603114504.814647-2-clopez@suse.de
[sean: use one tab instead of two]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Update the API documentation for KVM_PRE_FAULT_MEMORY to account for
its s390 implementation.
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260527144358.186359-4-imbrenda@linux.ibm.com>
|
|
MAPGPA request from TDX VMs gets split into chunks by KVM using a loop
of userspace exits until the complete range is handled.
In some cases userspace VMM might decide to break the MAPGPA operation
and continue it later. For example: in the case of intrahost migration
userspace might decide to continue the MAPGPA operation after the
migration is completed.
Allow userspace to signal to TDX guests that the MAPGPA operation should
be retried the next time the guest is scheduled.
This is potentially a breaking change since if userspace sets
hypercall.ret to a value other than EBUSY or EINVAL an EINVAL error code
will be returned to userspace. As of now QEMU never sets hypercall.ret
to a non-zero value after handling KVM_EXIT_HYPERCALL so this change
should be safe.
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Vishal Annapurve <vannapurve@google.com>
Co-developed-by: Sagi Shahar <sagis@google.com>
Signed-off-by: Sagi Shahar <sagis@google.com>
Link: https://patch.msgid.link/20260305222627.4193305-2-sagis@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a 'gpat' field to kvm_svm_nested_state_hdr to carry L2's guest PAT
value across save and restore.
When KVM_X86_QUIRK_NESTED_SVM_SHARED_PAT is disabled and the vCPU is in
guest mode with nested NPT enabled, save vmcb02's g_pat into the header on
KVM_GET_NESTED_STATE, and restore it on KVM_SET_NESTED_STATE.
Host-initiated accesses to IA32_PAT (via KVM_GET/SET_MSRS) always target
L1's hPAT, so they cannot be used to save or restore gPAT. The separate
header field ensures that KVM_GET/SET_MSRS and KVM_GET/SET_NESTED_STATE are
independent and can be ordered arbitrarily during save and restore.
Note that struct kvm_svm_nested_state_hdr is included in a union padded to
120 bytes, so there is room to add the gpat field without changing any
offsets.
Fixes: cc440cdad5b7 ("KVM: nSVM: implement KVM_GET_NESTED_STATE and KVM_SET_NESTED_STATE")
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260407190343.325299-9-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Document the nested state constants and structures for SVM that were added
by commit cc440cdad5b7 ("KVM: nSVM: implement KVM_GET_NESTED_STATE and
KVM_SET_NESTED_STATE").
Fixes: cc440cdad5b7 ("KVM: nSVM: implement KVM_GET_NESTED_STATE and KVM_SET_NESTED_STATE")
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260407190343.325299-8-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Define a quirk to control whether nested SVM shares L1's PAT with L2
(legacy behavior) or gives L2 its own independent gPAT (correct behavior
per the APM).
When the quirk is enabled (default), L2 shares L1's PAT, preserving the
legacy KVM behavior. When userspace disables the quirk, KVM correctly
virtualizes the PAT for nested SVM guests, giving L2 a separate gPAT as
specified in the AMD architecture.
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260407190343.325299-2-jmattson@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- ESA nesting support
- 4k memslots
- LPSW/E fix
|
|
Now that all the bits are properly addressed, provide a mechanism
for testing ESA mode guests in nested configurations.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
[farman@us.ibm.com: Updated commit message]
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Interrupts under GICv5 look quite different to those from older Arm
GICs. Specifically, the type is encoded in the top bits of the
interrupt ID.
Extend KVM_IRQ_LINE to cope with GICv5 PPIs and SPIs. The requires
subtly changing the KVM_IRQ_LINE API for GICv5 guests. For older Arm
GICs, PPIs had to be in the range of 16-31, and SPIs had to be
32-1019, but this no longer holds true for GICv5. Instead, for a GICv5
guest support PPIs in the range of 0-127, and SPIs in the range
0-65535. The documentation is updated accordingly.
The SPI range doesn't cover the full SPI range that a GICv5 system can
potentially cope with (GICv5 provides up to 24-bits of SPI ID space,
and we only have 16 bits to work with in KVM_IRQ_LINE). However, 65k
SPIs is more than would be reasonably expected on systems for years to
come.
In order to use vgic_is_v5(), the kvm/arm_vgic.h header is added to
kvm/arm.c.
Note: As the GICv5 KVM implementation currently doesn't support
injecting SPIs attempts to do so will fail. This restriction will by
lifted as the GICv5 KVM support evolves.
Co-authored-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Timothy Hayes <timothy.hayes@arm.com>
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-28-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
A recently added quirk does not fit in the left column of the table,
so it all has to be reformatted and realigned.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add KVM_X86_QUIRK_VMCS12_ALLOW_FREEZE_IN_SMM to allow L1 to set
FREEZE_IN_SMM in vmcs12's GUEST_IA32_DEBUGCTL field, as permitted
prior to commit 6b1dd26544d0 ("KVM: VMX: Preserve host's
DEBUGCTLMSR_FREEZE_IN_SMM while running the guest"). Enable the quirk
by default for backwards compatibility (like all quirks); userspace
can disable it via KVM_CAP_DISABLE_QUIRKS2 for consistency with the
constraints on WRMSR(IA32_DEBUGCTL).
Note that the quirk only bypasses the consistency check. The vmcs02 bit is
still owned by the host, and PMCs are not frozen during virtualized SMM.
In particular, if a host administrator decides that PMCs should not be
frozen during physical SMM, then L1 has no say in the matter.
Fixes: 095686e6fcb4 ("KVM: nVMX: Check vmcs12->guest_ia32_debugctl on nested VM-Enter")
Cc: stable@vger.kernel.org
Signed-off-by: Jim Mattson <jmattson@google.com>
Link: https://patch.msgid.link/20260205231537.1278753-1-jmattson@google.com
[sean: tag for stable@, clean-up and fix goofs in the comment and docs]
Signed-off-by: Sean Christopherson <seanjc@google.com>
[Rename quirk. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM_CAP_SYNC_MMU is provided by KVM's MMU notifiers, which are now always
available. Move the definition from individual architectures to common
code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- gmap rewrite: completely new memory management for kvm/s390
- vSIE improvement
- maintainership change for s390 vfio-pci
- small quality of life improvement for protected guests
|
|
KVM x86 misc changes for 6.20
- Disallow changing the virtual CPU model if L2 is active, for all the same
reasons KVM disallows change the model after the first KVM_RUN.
- Fix a bug where KVM would incorrectly reject host accesses to PV MSRs that
were advertised as supported to userspace when running with
KVM_CAP_ENFORCE_PV_FEATURE_CPUID enabled.
- Fix a bug where KVM would attempt to read protect guest state (CR3) when
configuring an async #PF entry.
- Fail the build if EXPORT_SYMBOL_GPL or EXPORT_SYMBOL is used in KVM (for x86
only) to enforce usage of EXPORT_SYMBOL_FOR_KVM_INTERNAL. Explicitly allow
the few exports that are intended for external usage.
- Ignore -EBUSY when checking nested events after a vCPU exits blocking as
the WARN is user-triggerable, and because exiting to userspace on -EBUSY
does more harm than good in pretty much every situation.
- Throw in the towel and drop the WARN on INIT/SIPI being blocked when vCPU is
in Wait-For-SIPI, as playing whack-a-mole with syzkaller turned out to be an
unwinnable game.
- Add support for new Intel instructions that don't require anything beyond
enumerating feature flags to userspace.
- Grab SRCU when reading PDPTRs in KVM_GET_SREGS2.
- Add WARNs to guard against modifying KVM's CPU caps outside of the intended
setup flow, as nested VMX in particular is sensitive to unexpected changes
in KVM's golden configuration.
- Add a quirk to allow userspace to opt-in to actually suppress EOI broadcasts
when the suppression feature is enabled by the guest (currently limited to
split IRQCHIP, i.e. userspace I/O APIC). Sadly, simply fixing KVM to honor
Suppress EOI Broadcasts isn't an option as some userspaces have come to rely
on KVM's buggy behavior (KVM advertises Supress EOI Broadcast irrespective
of whether or not userspace I/O APIC supports Directed EOIs).
- Minor cleanups.
|
|
KVM SVM changes for 6.20
- Drop a user-triggerable WARN on nested_svm_load_cr3() failure.
- Add support for virtualizing ERAPS. Note, correct virtualization of ERAPS
relies on an upcoming, publicly announced change in the APM to reduce the
set of conditions where hardware (i.e. KVM) *must* flush the RAP.
- Ignore nSVM intercepts for instructions that are not supported according to
L1's virtual CPU model.
- Add support for expedited writes to the fast MMIO bus, a la VMX's fastpath
for EPT Misconfig.
- Don't set GIF when clearing EFER.SVME, as GIF exists independently of SVM,
and allow userspace to restore nested state with GIF=0.
- Treat exit_code as an unsigned 64-bit value through all of KVM.
- Add support for fetching SNP certificates from userspace.
- Fix a bug where KVM would use vmcb02 instead of vmcb01 when emulating VMLOAD
or VMSAVE on behalf of L2.
- Misc fixes and cleanups.
|
|
Add a new IOCTL to allow userspace to manipulate storage keys directly.
This will make it easier to write selftests related to storage keys.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add two flags for KVM_CAP_X2APIC_API to allow userspace to control support
for Suppress EOI Broadcasts when using a split IRQCHIP (I/O APIC emulated
by userspace), which KVM completely mishandles. When x2APIC support was
first added, KVM incorrectly advertised and "enabled" Suppress EOI
Broadcast, without fully supporting the I/O APIC side of the equation,
i.e. without adding directed EOI to KVM's in-kernel I/O APIC.
That flaw was carried over to split IRQCHIP support, i.e. KVM advertised
support for Suppress EOI Broadcasts irrespective of whether or not the
userspace I/O APIC implementation supported directed EOIs. Even worse,
KVM didn't actually suppress EOI broadcasts, i.e. userspace VMMs without
support for directed EOI came to rely on the "spurious" broadcasts.
KVM "fixed" the in-kernel I/O APIC implementation by completely disabling
support for Suppress EOI Broadcasts in commit 0bcc3fb95b97 ("KVM: lapic:
stop advertising DIRECTED_EOI when in-kernel IOAPIC is in use"), but
didn't do anything to remedy userspace I/O APIC implementations.
KVM's bogus handling of Suppress EOI Broadcast is problematic when the
guest relies on interrupts being masked in the I/O APIC until well after
the initial local APIC EOI. E.g. Windows with Credential Guard enabled
handles interrupts in the following order:
1. Interrupt for L2 arrives.
2. L1 APIC EOIs the interrupt.
3. L1 resumes L2 and injects the interrupt.
4. L2 EOIs after servicing.
5. L1 performs the I/O APIC EOI.
Because KVM EOIs the I/O APIC at step #2, the guest can get an interrupt
storm, e.g. if the IRQ line is still asserted and userspace reacts to the
EOI by re-injecting the IRQ, because the guest doesn't de-assert the line
until step #4, and doesn't expect the interrupt to be re-enabled until
step #5.
Unfortunately, simply "fixing" the bug isn't an option, as KVM has no way
of knowing if the userspace I/O APIC supports directed EOIs, i.e.
suppressing EOI broadcasts would result in interrupts being stuck masked
in the userspace I/O APIC due to step #5 being ignored by userspace. And
fully disabling support for Suppress EOI Broadcast is also undesirable, as
picking up the fix would require a guest reboot, *and* more importantly
would change the virtual CPU model exposed to the guest without any buy-in
from userspace.
Add KVM_X2APIC_ENABLE_SUPPRESS_EOI_BROADCAST and
KVM_X2APIC_DISABLE_SUPPRESS_EOI_BROADCAST flags to allow userspace to
explicitly enable or disable support for Suppress EOI Broadcasts. This
gives userspace control over the virtual CPU model exposed to the guest,
as KVM should never have enabled support for Suppress EOI Broadcast without
userspace opt-in. Not setting either flag will result in legacy quirky
behavior for backward compatibility.
Disallow fully enabling SUPPRESS_EOI_BROADCAST when using an in-kernel
I/O APIC, as KVM's history/support is just as tragic. E.g. it's not clear
that commit c806a6ad35bf ("KVM: x86: call irq notifiers with directed EOI")
was entirely correct, i.e. it may have simply papered over the lack of
Directed EOI emulation in the I/O APIC.
Note, Suppress EOI Broadcasts is defined only in Intel's SDM, not in AMD's
APM. But the bit is writable on some AMD CPUs, e.g. Turin, and KVM's ABI
is to support Directed EOI (KVM's name) irrespective of guest CPU vendor.
Fixes: 7543a635aa09 ("KVM: x86: Add KVM exit for IOAPIC EOIs")
Closes: https://lore.kernel.org/kvm/7D497EF1-607D-4D37-98E7-DAF95F099342@nutanix.com
Cc: stable@vger.kernel.org
Suggested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Khushit Shah <khushit.shah@nutanix.com>
Link: https://patch.msgid.link/20260123125657.3384063-1-khushit.shah@nutanix.com
[sean: clean up minor formatting goofs and fix a comment typo]
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
For SEV-SNP, the host can optionally provide a certificate table to the
guest when it issues an attestation request to firmware (see GHCB 2.0
specification regarding "SNP Extended Guest Requests"). This certificate
table can then be used to verify the endorsement key used by firmware to
sign the attestation report.
While it is possible for guests to obtain the certificates through other
means, handling it via the host provides more flexibility in being able
to keep the certificate data in sync with the endorsement key throughout
host-side operations that might resulting in the endorsement key
changing.
In the case of KVM, userspace will be responsible for fetching the
certificate table and keeping it in sync with any modifications to the
endorsement key by other userspace management tools. Define a new
KVM_EXIT_SNP_REQ_CERTS event where userspace is provided with the GPA of
the buffer the guest has provided as part of the attestation request so
that userspace can write the certificate data into it while relying on
filesystem-based locking to keep the certificates up-to-date relative to
the endorsement keys installed/utilized by firmware at the time the
certificates are fetched.
[Melody: Update the documentation scheme about how file locking is
expected to happen.]
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Melody Wang <huibo.wang@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Link: https://patch.msgid.link/20260109231732.1160759-2-michael.roth@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a bit of documentation for KVM_EXIT_ARM_LDST64B so that userspace
knows what to expect.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oliver Upton <oupton@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- SCA rework
- VIRT_XFER_TO_GUEST_WORK support
- Operation exception forwarding support
- Cleanups
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.19
- Support for userspace handling of synchronous external aborts (SEAs),
allowing the VMM to potentially handle the abort in a non-fatal
manner.
- Large rework of the VGIC's list register handling with the goal of
supporting more active/pending IRQs than available list registers in
hardware. In addition, the VGIC now supports EOImode==1 style
deactivations for IRQs which may occur on a separate vCPU than the
one that acked the IRQ.
- Support for FEAT_XNX (user / privileged execute permissions) and
FEAT_HAF (hardware update to the Access Flag) in the software page
table walkers and shadow MMU.
- Allow page table destruction to reschedule, fixing long need_resched
latencies observed when destroying a large VM.
- Minor fixes to KVM and selftests
|
|
KVM/riscv changes for 6.19
- SBI MPXY support for KVM guest
- New KVM_EXIT_FAIL_ENTRY_NO_VSFILE for the case when in-kernel
AIA virtualization fails to allocate IMSIC VS-file
- Support enabling dirty log gradually in small chunks
- Fix guest page fault within HLV* instructions
- Flush VS-stage TLB after VCPU migration for Andes cores
|
|
KVM generic changes for 6.19:
- Use the recently-added WQ_PERCPU when creating the per-CPU workqueue for
irqfd cleanup.
- Fix a goof in the dirty ring documentation.
|
|
There is already support of enabling dirty log gradually in small chunks
for x86 in commit 3c9bd4006bfc ("KVM: x86: enable dirty log gradually in
small chunks") and c862626 ("KVM: arm64: Support enabling dirty log
gradually in small chunks"). This adds support for riscv.
x86 and arm64 writes protect both huge pages and normal pages now, so
riscv protect also protects both huge pages and normal pages.
On a nested virtualization setup (RISC-V KVM running inside a QEMU VM
on an [Intel® Core™ i5-12500H] host), I did some tests with a 2G Linux
VM using different backing page sizes. The time taken for
memory_global_dirty_log_start in the L2 QEMU is listed below:
Page Size Before After Optimization
4K 4490.23ms 31.94ms
2M 48.97ms 45.46ms
1G 28.40ms 30.93ms
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Signed-off-by: Dong Yang <dayss1224@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20251103062825.9084-1-dayss1224@gmail.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Setting KVM_CAP_S390_USER_OPEREXEC will forward all operation
exceptions to user space. This also includes the 0x0000 instructions
managed by KVM_CAP_S390_USER_INSTR0. It's helpful if user space wants
to emulate instructions which do not (yet) have an opcode.
While we're at it refine the documentation for
KVM_CAP_S390_USER_INSTR0.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
Document the new userspace-visible features and APIs for handling
synchronous external abort (SEA)
- KVM_CAP_ARM_SEA_TO_USER: How userspace enables the new feature.
- KVM_EXIT_ARM_SEA: exit userspace gets when it needs to handle SEA
and what userspace gets while taking the SEA.
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Link: https://msgid.link/20251013185903.1372553-4-jiaqiyan@google.com
[ oliver: make documentation concise, remove implementation detail ]
Signed-off-by: Oliver Upton <oupton@kernel.org>
|
|
7.43 has been assigned twice, make
KVM_CAP_ARM_CACHEABLE_PFNMAP_SUPPORTED 7.44.
Fixes: f55ce5a6cd33 ("KVM: arm64: Expose new KVM cap for cacheable PFNMAP")
Reviewed-by: Ankit Agrawal <ankita@nvidia.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit 3ccbf6f47098 ("KVM: x86/mmu: Return -EAGAIN if userspace
deletes/moves memslot during prefault")
- Don't try to get PMU capabbilities from perf when running a CPU with hybrid
CPUs/PMUs, as perf will rightly WARN.
- Rework KVM_CAP_GUEST_MEMFD_MMAP (newly introduced in 6.18) into a more
generic KVM_CAP_GUEST_MEMFD_FLAGS
- Add a guest_memfd INIT_SHARED flag and require userspace to explicitly set
said flag to initialize memory as SHARED, irrespective of MMAP. The
behavior merged in 6.18 is that enabling mmap() implicitly initializes
memory as SHARED, which would result in an ABI collision for x86 CoCo VMs
as their memory is currently always initialized PRIVATE.
- Allow mmap() on guest_memfd for x86 CoCo VMs, i.e. on VMs with private
memory, to enable testing such setups, i.e. to hopefully flush out any
other lurking ABI issues before 6.18 is officially released.
- Add testcases to the guest_memfd selftest to cover guest_memfd without MMAP,
and host userspace accesses to mmap()'d private memory.
|
|
While reading the documentation, I saw a exit code I could not grep for, to
figure out it has a slightly different name.
Fix that name in documentation so it points to the right exit code.
Signed-off-by: Leonardo Bras <leo.bras@arm.com>
Link: https://lore.kernel.org/r/20251014152802.13563-1-leo.bras@arm.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM rejects calls to KVM_{GET,SET}_VCPU_EVENTS for an uninitialized vCPU
as of commit cc96679f3c03 ("KVM: arm64: Prevent access to vCPU events
before init"). Update the corresponding API documentation.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add a guest_memfd flag to allow userspace to state that the underlying
memory should be configured to be initialized as shared, and reject user
page faults if the guest_memfd instance's memory isn't shared. Because
KVM doesn't yet support in-place private<=>shared conversions, all
guest_memfd memory effectively follows the initial state.
Alternatively, KVM could deduce the initial state based on MMAP, which for
all intents and purposes is what KVM currently does. However, implicitly
deriving the default state based on MMAP will result in a messy ABI when
support for in-place conversions is added.
For x86 CoCo VMs, which don't yet support MMAP, memory is currently private
by default (otherwise the memory would be unusable). If MMAP implies
memory is shared by default, then the default state for CoCo VMs will vary
based on MMAP, and from userspace's perspective, will change when in-place
conversion support is added. I.e. to maintain guest<=>host ABI, userspace
would need to immediately convert all memory from shared=>private, which
is both ugly and inefficient. The inefficiency could be avoided by adding
a flag to state that memory is _private_ by default, irrespective of MMAP,
but that would lead to an equally messy and hard to document ABI.
Bite the bullet and immediately add a flag to control the default state so
that the effective behavior is explicit and straightforward.
Fixes: 3d3a04fad25a ("KVM: Allow and advertise support for host mmap() on guest_memfd files")
Cc: David Hildenbrand <david@redhat.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rework the not-yet-released KVM_CAP_GUEST_MEMFD_MMAP into a more generic
KVM_CAP_GUEST_MEMFD_FLAGS capability so that adding new flags doesn't
require a new capability, and so that developers aren't tempted to bundle
multiple flags into a single capability.
Note, kvm_vm_ioctl_check_extension_generic() can only return a 32-bit
value, but that limitation can be easily circumvented by adding e.g.
KVM_CAP_GUEST_MEMFD_FLAGS2 in the unlikely event guest_memfd supports more
than 32 flags.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20251003232606.4070510-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
KVM x86 CET virtualization support for 6.18
Add support for virtualizing Control-flow Enforcement Technology (CET) on
Intel (Shadow Stacks and Indirect Branch Tracking) and AMD (Shadow Stacks).
CET is comprised of two distinct features, Shadow Stacks (SHSTK) and Indirect
Branch Tracking (IBT), that can be utilized by software to help provide
Control-flow integrity (CFI). SHSTK defends against backward-edge attacks
(a.k.a. Return-oriented programming (ROP)), while IBT defends against
forward-edge attacks (a.k.a. similarly CALL/JMP-oriented programming (COP/JOP)).
Attackers commonly use ROP and COP/JOP methodologies to redirect the control-
flow to unauthorized targets in order to execute small snippets of code,
a.k.a. gadgets, of the attackers choice. By chaining together several gadgets,
an attacker can perform arbitrary operations and circumvent the system's
defenses.
SHSTK defends against backward-edge attacks, which execute gadgets by modifying
the stack to branch to the attacker's target via RET, by providing a second
stack that is used exclusively to track control transfer operations. The
shadow stack is separate from the data/normal stack, and can be enabled
independently in user and kernel mode.
When SHSTK is is enabled, CALL instructions push the return address on both the
data and shadow stack. RET then pops the return address from both stacks and
compares the addresses. If the return addresses from the two stacks do not
match, the CPU generates a Control Protection (#CP) exception.
IBT defends against backward-edge attacks, which branch to gadgets by executing
indirect CALL and JMP instructions with attacker controlled register or memory
state, by requiring the target of indirect branches to start with a special
marker instruction, ENDBRANCH. If an indirect branch is executed and the next
instruction is not an ENDBRANCH, the CPU generates a #CP. Note, ENDBRANCH
behaves as a NOP if IBT is disabled or unsupported.
From a virtualization perspective, CET presents several problems. While SHSTK
and IBT have two layers of enabling, a global control in the form of a CR4 bit,
and a per-feature control in user and kernel (supervisor) MSRs (U_CET and S_CET
respectively), the {S,U}_CET MSRs can be context switched via XSAVES/XRSTORS.
Practically speaking, intercepting and emulating XSAVES/XRSTORS is not a viable
option due to complexity, and outright disallowing use of XSTATE to context
switch SHSTK/IBT state would render the features unusable to most guests.
To limit the overall complexity without sacrificing performance or usability,
simply ignore the potential virtualization hole, but ensure that all paths in
KVM treat SHSTK/IBT as usable by the guest if the feature is supported in
hardware, and the guest has access to at least one of SHSTK or IBT. I.e. allow
userspace to advertise one of SHSTK or IBT if both are supported in hardware,
even though doing so would allow a misbehaving guest to use the unadvertised
feature.
Fully emulating SHSTK and IBT would also require significant complexity, e.g.
to track and update branch state for IBT, and shadow stack state for SHSTK.
Given that emulating large swaths of the guest code stream isn't necessary on
modern CPUs, punt on emulating instructions that meaningful impact or consume
SHSTK or IBT. However, instead of doing nothing, explicitly reject emulation
of such instructions so that KVM's emulator can't be abused to circumvent CET.
Disable support for SHSTK and IBT if KVM is configured such that emulation of
arbitrary guest instructions may be required, specifically if Unrestricted
Guest (Intel only) is disabled, or if KVM will emulate a guest.MAXPHYADDR that
is smaller than host.MAXPHYADDR.
Lastly disable SHSTK support if shadow paging is enabled, as the protections
for the shadow stack are novel (shadow stacks require Writable=0,Dirty=1, so
that they can't be directly modified by software), i.e. would require
non-trivial support in the Shadow MMU.
Note, AMD CPUs currently only support SHSTK. Explicitly disable IBT support
so that KVM doesn't over-advertise if AMD CPUs add IBT, and virtualizing IBT
in SVM requires KVM modifications.
|
|
KVM x86 changes for 6.18
- Don't (re)check L1 intercepts when completing userspace I/O to fix a flaw
where a misbehaving usersepace (a.k.a. syzkaller) could swizzle L1's
intercepts and trigger a variety of WARNs in KVM.
- Emulate PERF_CNTR_GLOBAL_STATUS_SET for PerfMonV2 guests, as the MSR is
supposed to exist for v2 PMUs.
- Allow Centaur CPU leaves (base 0xC000_0000) for Zhaoxin CPUs.
- Clean up KVM's vector hashing code for delivering lowest priority IRQs.
- Clean up the fastpath handler code to only handle IPIs and WRMSRs that are
actually "fast", as opposed to handling those that KVM _hopes_ are fast, and
in the process of doing so add fastpath support for TSC_DEADLINE writes on
AMD CPUs.
- Clean up a pile of PMU code in anticipation of adding support for mediated
vPMUs.
- Add support for the immediate forms of RDMSR and WRMSRNS, sans full
emulator support (KVM should never need to emulate the MSRs outside of
forced emulation and other contrived testing scenarios).
- Clean up the MSR APIs in preparation for CET and FRED virtualization, as
well as mediated vPMU support.
- Rejecting a fully in-kernel IRQCHIP if EOIs are protected, i.e. for TDX VMs,
as KVM can't faithfully emulate an I/O APIC for such guests.
- KVM_REQ_MSR_FILTER_CHANGED into a generic RECALC_INTERCEPTS in preparation
for mediated vPMU support, as KVM will need to recalculate MSR intercepts in
response to PMU refreshes for guests with mediated vPMUs.
- Misc cleanups and minor fixes.
|
|
Add a KVM-defined ONE_REG register, KVM_REG_GUEST_SSP, to let userspace
save and restore the guest's Shadow Stack Pointer (SSP). On both Intel
and AMD, SSP is a hardware register that can only be accessed by software
via dedicated ISA (e.g. RDSSP) or via VMCS/VMCB fields (used by hardware
to context switch SSP at entry/exit). As a result, SSP doesn't fit in
any of KVM's existing interfaces for saving/restoring state.
Internally, treat SSP as a fake/synthetic MSR, as the semantics of writes
to SSP follow that of several other Shadow Stack MSRs, e.g. the PLx_SSP
MSRs. Use a translation layer to hide the KVM-internal MSR index so that
the arbitrary index doesn't become ABI, e.g. so that KVM can rework its
implementation as needed, so long as the ONE_REG ABI is maintained.
Explicitly reject accesses to SSP if the vCPU doesn't have Shadow Stack
support to avoid running afoul of ignore_msrs, which unfortunately applies
to host-initiated accesses (which is a discussion for another day). I.e.
ensure consistent behavior for KVM-defined registers irrespective of
ignore_msrs.
Link: https://lore.kernel.org/all/aca9d389-f11e-4811-90cf-d98e345a5cc2@intel.com
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Tested-by: Mathias Krause <minipli@grsecurity.net>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-14-seanjc@google.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Enable KVM_{G,S}ET_ONE_REG uAPIs so that userspace can access MSRs and
other non-MSR registers through them, along with support for
KVM_GET_REG_LIST to enumerate support for KVM-defined registers.
This is in preparation for allowing userspace to read/write the guest SSP
register, which is needed for the upcoming CET virtualization support.
Currently, two types of registers are supported: KVM_X86_REG_TYPE_MSR and
KVM_X86_REG_TYPE_KVM. All MSRs are in the former type; the latter type is
added for registers that lack existing KVM uAPIs to access them. The "KVM"
in the name is intended to be vague to give KVM flexibility to include
other potential registers. More precise names like "SYNTHETIC" and
"SYNTHETIC_MSR" were considered, but were deemed too confusing (e.g. can
be conflated with synthetic guest-visible MSRs) and may put KVM into a
corner (e.g. if KVM wants to change how a KVM-defined register is modeled
internally).
Enumerate only KVM-defined registers in KVM_GET_REG_LIST to avoid
duplicating KVM_GET_MSR_INDEX_LIST, and so that KVM can return _only_
registers that are fully supported (KVM_GET_REG_LIST is vCPU-scoped, i.e.
can be precise, whereas KVM_GET_MSR_INDEX_LIST is system-scoped).
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yang Weijiang <weijiang.yang@intel.com>
Link: https://lore.kernel.org/all/20240219074733.122080-18-weijiang.yang@intel.com [1]
Tested-by: Mathias Krause <minipli@grsecurity.net>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250919223258.1604852-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Explicitly document that the behavior of KVM_SET_PIT2 strictly conforms
to the Intel 8254 PIT hardware specification, specifically that a write of
'0' adheres to the spec's definition that a programmed count of '0' is
converted to the maximum possible value (2^16). E.g. an unaware userspace
might attempt to validate that KVM_GET_PIT2 returns the exact state set
via KVM_SET_PIT2, and be surprised when the returned count is 65536, not 0.
Add a references to the Intel 8254 PIT datasheet that will hopefully stay
fresh for some time (the internet isn't exactly brimming with copies of
the 8254 datasheet).
Link: https://lore.kernel.org/all/CANypQFbEySjKOFLqtFFf2vrEe=NBr7XJfbkjQhqXuZGg7Rpoxw@mail.gmail.com
Signed-off-by: Jiaming Zhang <r772577952@gmail.com>
Link: https://lore.kernel.org/r/20250905174736.260694-1-r772577952@gmail.com
[sean: add context Link, drop local APIC change, massage changelog accordingly]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that all the x86 and arm64 plumbing for mmap() on guest_memfd is in
place, allow userspace to set GUEST_MEMFD_FLAG_MMAP and advertise support
via a new capability, KVM_CAP_GUEST_MEMFD_MMAP.
The availability of this capability is determined per architecture, and
its enablement for a specific guest_memfd instance is controlled by the
GUEST_MEMFD_FLAG_MMAP flag at creation time.
Update the KVM API documentation to detail the KVM_CAP_GUEST_MEMFD_MMAP
capability, the associated GUEST_MEMFD_FLAG_MMAP, and provide essential
information regarding support for mm |
