| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The URL for the DS620 datasheet has changed. Update it to reflect the
current location.
Signed-off-by: Okan Akyuz <okan.akyuz.linux@gmail.com>
Link: https://lore.kernel.org/r/20251215204423.80242-1-okan.akyuz.linux@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The devicetree binding for g762 was converted to YAML to match vendor
prefix conventions. Update the reference accordingly.
Signed-off-by: Kathara Sasikumar <katharasasikumar007@gmail.com>
Link: https://lore.kernel.org/r/20251205215835.783273-1-katharasasikumar007@gmail.com
Fixes: 3d8e25372417 ("dt-bindings: hwmon: g762: Convert to yaml schema")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for ROG STRIX X470-I GAMING
Signed-off-by: René Rebe <rene@exactco.de>
Reviewed-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251120.140009.210830394703243387.rene@exactco.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The System Management Controller on Apple Silicon devices is responsible
for integrating and exposing the data reported by the vast array of
hardware monitoring sensors present on these devices. It is also
responsible for fan control, and allows users to manually set fan
speeds if they so desire. Add a hwmon driver to expose current,
power, temperature, and voltage monitoring sensors, as well as
fan speed monitoring and control via the SMC on Apple Silicon devices.
The SMC firmware has no consistency between devices, even when they
share an SoC. The FourCC keys used to access sensors are almost
random. An M1 Mac mini will have different FourCCs for its CPU core
temperature sensors to an M1 MacBook Pro, for example. For this
reason, the valid sensors for a given device are specified in a
child of the SMC Devicetree node. The driver uses this information
to determine which sensors to make available at runtime.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Co-developed-by: Janne Grunau <j@jannau.net>
Signed-off-by: Janne Grunau <j@jannau.net>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Link: https://lore.kernel.org/r/20251112-macsmc-subdevs-v5-6-728e4b91fe81@gmail.com
[groeck: Added Documentation to index]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Some of the datasheet links contained .pdf suffix which resulted in 404.
This patch updates the links to the correct URLs on Renesas website.
Signed-off-by: Igor Reznichenko <igor@reznichenko.net>
Link: https://lore.kernel.org/r/20251115182908.1357793-1-igor@reznichenko.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The RAA229141A is a digital dual output multiphase (X+Y ≤ 12) PWM
controller designed to be compliant with Intel VR13, VR13.HC, VR14 and
VR14.Cloud specifications, targeting VCORE and auxiliary rails.
The RAA229141A supports the Intel SVID interface along with PMBus V1.3
specifications, making it ideal for controlling the microprocessor core and
system rails in Intel VR13, VR13.HC, VR14 and VR14.Cloud platforms.
Signed-off-by: Jeff Lin <jefflin994697@gmail.com>
Link: https://lore.kernel.org/r/20251106104519.2014853-1-jefflin994697@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a driver for the ST Microelectronics TSC1641 16-bit high-precision
power monitor. The driver supports reading bus voltage, current, power,
and temperature. Sysfs attributes are exposed for shunt resistor and
update interval. The driver integrates with the hwmon subsystem and
supports optional ALERT pin polarity configuration.
Signed-off-by: Igor Reznichenko <igor@reznichenko.net>
Link: https://lore.kernel.org/r/20251105201406.1210856-3-igor@reznichenko.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The temperature is not from the die itself but from an NTC. That was
verified with an IR camera. Fix that.
Signed-off-by: Andreas Kemnade <akemnade@kernel.org>
Link: https://lore.kernel.org/r/20251027202847.119707-1-akemnade@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for dht20 temperature and humidity sensor from Aosong.
Modify aht10 driver to handle different init command for dht20 sensor by
adding init_cmd entry in the driver data. dht20 sensor is compatible with
aht10 hwmon driver with this change.
Tested on TI am62x SK board with dht20 sensor connected at i2c-2 port.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Link: https://lore.kernel.org/r/2025112-94320-906858@bhairav-test.ee.iitb.ac.in
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for the ROG STRIX X870-F GAMING WIFI board.
Testing done by the board owner [1].
[1] https://github.com/zeule/asus-ec-sensors/issues/83
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251102114038.283396-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In 2021, Maxim Integrated was acquired by Analog Devices.
maxim-ic.com & maximintegrated.com links redirect to analog.com.
Update maxim-ic.com & maximintegrated.com links to analog.com links.
Signed-off-by: Ankan Biswas <spyjetfayed@gmail.com>
Link: https://lore.kernel.org/r/20251017163501.11285-1-spyjetfayed@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In 2021, Maxim Integrated was acquired by Analog Devices.
maxim-ic.com & maximintegrated.com links redirect to analog.com.
Missing datasheets now available at Analog Devices added.
Signed-off-by: Ankan Biswas <spyjetfayed@gmail.com>
Link: https://lore.kernel.org/r/20251017161422.4404-1-spyjetfayed@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
In 2021, Maxim Integrated was acquired by Analog Devices.
maxim-ic.com & maximintegrated.com links redirect to analog.com.
Broken redirects fixed to their proper analog.com links.
Fixes warnings in 'make linkcheckdocs'.
Signed-off-by: Ankan Biswas <spyjetfayed@gmail.com>
Link: https://lore.kernel.org/r/20251017154755.32105-1-spyjetfayed@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
This patch fixes warnings in Documentation/hwmon/lm90.rst reported when
running 'make linkcheckdocs'.
On 2011-09-23 National Semiconductors became part of Texas Instruments
and national.com is no longer accessible. The datasheet resources for
the chips are now available at Texas Instruments website and have been
updated for lm90.
In 2021, Maxim Integrated was acquired by Analog Devices and maxim-ic.com
redirects to analog.com. The chip datasheets are now available at
Analog Devices and have been updated accordingly.
Some additional broken or unavailable links have been replaced with
equivalents hosted by DigiKey.
Signed-off-by: Ankan Biswas <spyjetfayed@gmail.com>
Link: https://lore.kernel.org/r/20251016103049.2573-1-spyjetfayed@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for mp9945 device from Monolithic Power Systems, Inc.
(MPS) vendor. This is a single phase digital step down converter.
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Link: https://lore.kernel.org/r/20251009205458.396368-2-chou.cosmo@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The board has a similar sensor configuration as the ROG STRIX X870E-E
GAMING WIFI, with an additional temperature sensor header.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251003081002.1013313-3-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Added support for Pro WS TRX50-SAGE WIFI motherboard.
Signed-off-by: Paul Heneghan <paul@networks-extra.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20251003081002.1013313-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
ADPM12200 is a quarter brick DC/DC Power Module. It is a high power
non-isolated converter capable of delivering regulated 12V with
continuous power level of 2000W. Uses PMBus.
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20251001-hwmon-next-v1-2-f8ca6a648203@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for MAX17616/MAX17616A current-limiter with
overvoltage/surge, undervoltage, reverse polarity, loss of ground
protection with PMBus interface. The PMBus interface allows monitoring
of input/output voltages, output current and temperature.
Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com>
Link: https://lore.kernel.org/r/20250930-upstream-max17616-v1-2-1525a85f126c@analog.com
[groeck: Fixed htmldocs 'WARNING: Title underline too short'
as reported by Kriish Sharma <kriish.sharma2006@gmail.com>]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for MPS VR mp2925 and mp2929 controller. This driver exposes
telemetry and limit value readings and writtings.
Signed-off-by: Wensheng Wang <wenswang@yeah.net>
Link: https://lore.kernel.org/r/20250928092845.1394718-2-wenswang@yeah.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Register fans connected under EC as thermal cooling devices as well, so
these fans can then work with the thermal framework.
During the driver probing phase, we will also try to register each fan
as a thermal cooling device based on previous probe result (whether the
there are fans connected on that channel, and whether EC supports fan
control). The basic get max state, get current state, and set current
state methods are then implemented as well.
Signed-off-by: Sung-Chi Li <lschyi@chromium.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250911-cros_ec_fan-v6-3-a1446cc098af@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Newer EC firmware supports controlling fans through host commands, so
adding corresponding implementations for controlling these fans in the
driver for other kernel services and userspace to control them.
The driver will first probe the supported host command versions (get and
set of fan PWM values, get and set of fan control mode) to see if the
connected EC fulfills the requirements of controlling the fan, then
exposes corresponding sysfs nodes for userspace to control the fan with
corresponding read and write implementations.
As EC will automatically change the fan mode to auto when the device is
suspended, the power management hooks are added as well to keep the fan
control mode and fan PWM value consistent during suspend and resume. As
we need to access the hwmon device in the power management hook, update
the driver by storing the hwmon device in the driver data as well.
Signed-off-by: Sung-Chi Li <lschyi@chromium.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250911-cros_ec_fan-v6-2-a1446cc098af@google.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add a new driver for the Kontron SMARC-sAM67 board management
controller. It has two voltage sensors and one temperature sensor.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20250912120745.2295115-7-mwalle@kernel.org
[groeck: Added sa67 to index.rst]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for TUF GAMING X670E PLUS WIFI
Signed-off-by: Mohamad Kamal <mohamad.kamal.85@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250914084019.1108941-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Many machines treat fan state 3 as some sort of automatic mode,
which is superior to the separate SMM calls for switching to
automatic fan mode for two reasons:
- the fan control mode can be controlled for each fan separately
- the current fan control mode can be retrieved from the BIOS
On some machines however, this special fan state does not exist.
Fan state 3 acts like a regular fan state on such machines or
does not exist at all. Such machines usually use separate SMM calls
for enabling/disabling automatic fan control.
Add support for it. If the machine supports separate SMM calls
for changing the fan control mode, then the other interface is
ignored.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20250917181036.10972-4-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for ROG STRIX X870E-E GAMING WIFI
This board uses the same sensor configuration as the
ProArt X870E-CREATOR WIFI motherboard.
Signed-off-by: Ben Copeland <ben.copeland@linaro.org>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250923192935.11339-2-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for ROG STRIX X670E-E GAMING WIFI
Signed-off-by: Shane Fagan <mail@shanefagan.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250914074125.135656-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for the MPS MP5998 hot-swap controller. Like MP5990, MP5998
uses EFUSE_CFG (0xC4) bit 9 to indicate linear/direct data format.
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Link: https://lore.kernel.org/r/20250916095026.800164-2-chou.cosmo@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add GPD fan driver document
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Link: https://lore.kernel.org/r/20250908-gpd_fan-v9-2-7b4506c03953@uniontech.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
All sht2x chips share the same communication protocol so add support for
them.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250908-sht2x-v4-2-bc15f68af7de@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Drop extra empty lines and organize sysfs entries in a table.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250908-sht2x-v4-1-bc15f68af7de@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Implement locking in the hardware monitoring core for drivers using
the _with_info() API functions.
Most hardware monitoring drivers need to support locking to protect
against parallel accesses from userspace. With older API functions, such
locking had to be implemented in the driver code since sysfs attributes
were created by the driver. However, the _with_info() API creates sysfs
attributes in the hardware monitoring core. This makes it easy to move
the locking primitives into that code. This has the benefit of simplifying
driver code while at the same time reducing the risk of incomplete of bad
locking implementations in hardware monitoring drivers.
While this means that all accesses are forced to be synchronized, this
has little if any practical impact since accesses are expected to be low
frequency and are typically synchronized from userspace anyway since
only a single process is accessing the data. On top of that, many drivers
use regmap, which also has its own locking scheme and already serializes
accesses.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for MPS VR controller mp29502. This driver exposes
telemetry and limits value readings and writtings.
Signed-off-by: Wensheng Wang <wenswang@yeah.net>
Link: https://lore.kernel.org/r/20250805102020.749850-3-wenswang@yeah.net
[groeck: Fixed document formatting]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for MPS VR mp2869/mp2869a,mp29608/mp29608a,mp29612/mp29612a
and mp29816/mp29816a/mp29816b/mp29816c controller. This driver exposes
telemetry and limit value readings and writtings.
Signed-off-by: Wensheng Wang <wenswang@yeah.net>
Link: https://lore.kernel.org/r/20250805102020.749850-2-wenswang@yeah.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for ROG STRIX X870-I GAMING WIFI
Signed-off-by: Maciej Zonski <me@zonni.pl>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250906161748.219567-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
INA700 is register compatible to INA780 but has different current, power,
and energy LSB values.
While the chip does not directly report the shunt voltage, report
it anyway by calculating its value from the current register.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # INA780
Cc: Christian Kahr <christian.kahr@sie.at>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
INA780 is similar to the other chips in the series, but does not
support the shunt voltage register. Shunt voltage limit registers
have been renamed to current limit registers, but are otherwise
identical.
While the chip does not directly report the shunt voltage, report
it anyway by calculating its value from the current register.
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # INA780
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Since the shunt voltage register and the current register now report the
same values, use the shunt voltage limit registers to report and adjust
current limits, using the same LSB as the LSB used for the actual current
register.
Handle current register accuracy differences in separate function to
improve code readability.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # INA780
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Update driver documentation and Kconfig entry to list all chips supported
by the driver.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # INA780
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
There are no in-tree users of ina2xx platform data. Drop
support for it. The driver already supports device properties
which can be used as alternative if needed.
Also remove reference to the non-existing shunt_resistor sysfs
attribute from the driver documentation.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # INA780
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Many chips require 64-bit variables to display the accumulated energy,
even more so since the energy units are micro-Joule. Add new sensor type
"energy64" to support reporting the chip energy as 64-bit values.
Changing the entire hardware monitoring API is not feasible, and it is only
really necessary to support reading 64-bit values for the "energyX_input"
attribute. For this reason, keep the API as-is and use type casts on both
ends to pass 64-bit pointers when reading the accumulated energy. On the
write side (which is only useful for the energyX_enable attribute), keep
passing the written value as long.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> # INA780
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for the PRIME Z270-A board.
Tested-by: Jan Philipp Groß <janphilippgross@mailbox.org>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250903191736.14451-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for the ASUS ROG STRIX Z690-E GAMING WIFI
Signed-off-by: Tom Ingleby <tom@ewsting.com>
Link: https://lore.kernel.org/r/20250903031800.4173-1-tom@ewsting.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Changed a misspelling in crps.rst documentation:
"Critial" → "Critical".
Found using codespell tool.
Signed-off-by: Debanil Chowdhury <kerneldev@debanilchowdhury.com>
Link: https://lore.kernel.org/r/20250831045710.6009-1-kerneldev@debanilchowdhury.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for Pro WS WRX90E-SAGE SE
Signed-off-by: Michael Tandy <git@mjt.me.uk>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250830120121.738223-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
The Renesas RAA228244 and RAA228246 are recently released digital
multiphase controllers.
Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
Link: https://lore.kernel.org/r/ddeaf4d2fd1f9c85302ee9b5bf16cfaecf9b89ad.1756331945.git.grantpeltier93@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for sq24905c which is similar to adm1275 and other chips
of the series.
Signed-off-by: ChiShih Tsai <tomtsai764@gmail.com>
Link: https://lore.kernel.org/r/20250806223724.1207-3-tomtsai764@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for the ROG STRIX Z790-I GAMING WIFI board
Signed-off-by: Jamie Vickery <j.a.d.mcmillan@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250802130912.175543-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for ROG STRIX X670E-I GAMING WIFI
Signed-off-by: Runar Grønås <noizez@me.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250801195020.11106-1-eugene.shalygin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add support for lm75 compatible NXP P3T1750
temperature sensor.
Signed-off-by: Lakshay Piplani <lakshay.piplani@nxp.com>
Link: https://lore.kernel.org/r/20250728041913.3754236-2-lakshay.piplani@nxp.com
[groeck: Fixed alphabetic order for new chip entries]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
