| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Replace crypto_get_default_rng with crypto_stdrng_get_bytes
- Remove simd skcipher support
- Allow algorithm types to be disabled when CRYPTO_SELFTESTS is off
Algorithms:
- Remove CPU-based des/3des acceleration
- Add test vectors for authenc(hmac(md5),cbc({aes,des})) and
authenc(hmac({md5,sha1,sha224,sha256,sha384,sha512}),rfc3686(ctr(aes)))
- Replace spin lock with mutex in jitterentropy
Drivers:
- Add authenc algorithms to safexcel
- Add support for zstd in qat
- Add wireless mode support for QAT GEN6
- Add anti-rollback support for QAT GEN6
- Add support for ctr(aes), gcm(aes), and ccm(aes) in dthev2"
* tag 'v7.1-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (129 commits)
crypto: af_alg - use sock_kmemdup in alg_setkey_by_key_serial
crypto: vmx - remove CRYPTO_DEV_VMX from Kconfig
crypto: omap - convert reqctx buffer to fixed-size array
crypto: atmel-sha204a - add Thorsten Blum as maintainer
crypto: atmel-ecc - add Thorsten Blum as maintainer
crypto: qat - fix IRQ cleanup on 6xxx probe failure
crypto: geniv - Remove unused spinlock from struct aead_geniv_ctx
crypto: qce - simplify qce_xts_swapiv()
crypto: hisilicon - Fix dma_unmap_single() direction
crypto: talitos - rename first/last to first_desc/last_desc
crypto: talitos - fix SEC1 32k ahash request limitation
crypto: jitterentropy - replace long-held spinlock with mutex
crypto: hisilicon - remove unused and non-public APIs for qm and sec
crypto: hisilicon/qm - drop redundant variable initialization
crypto: hisilicon/qm - remove else after return
crypto: hisilicon/qm - add const qualifier to info_name in struct qm_cmd_dump_item
crypto: hisilicon - fix the format string type error
crypto: ccree - fix a memory leak in cc_mac_digest()
crypto: qat - add support for zstd
crypto: qat - use swab32 macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core:
- Support for RISC-V IO-page-table format in generic iommupt code
ARM-SMMU Updates:
- Introduction of an "invalidation array" for SMMUv3, which enables
future scalability work and optimisations for devices with a large
number of SMMUv3 instances
- Update the conditions under which the SMMUv3 driver works around
hardware errata for invalidation on MMU-700 implementations
- Fix broken command filtering for the host view of NVIDIA's "cmdqv"
SMMUv3 extension
- MMU-500 device-tree binding additions for Qualcomm Eliza & Hawi
SoCs
Intel VT-d:
- Support for dirty tracking on domains attached to PASID
- Removal of unnecessary read*()/write*() wrappers
- Improvements to the invalidation paths
AMD Vi:
- Race-condition fixed in debugfs code
- Make log buffer allocation NUMA aware
RISC-V:
- IO-TLB flushing improvements
- Minor fixes"
* tag 'iommu-updates-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (48 commits)
iommu/vt-d: Restore IOMMU_CAP_CACHE_COHERENCY
dt-bindings: arm-smmu: qcom: Add compatible for Hawi SoC
iommu/amd: Invalidate IRT cache for DMA aliases
iommu/riscv: Remove overflows on the invalidation path
iommu/amd: Fix clone_alias() to use the original device's devid
iommu/vt-d: Remove the remaining pages along the invalidation path
iommu/vt-d: Pass size_order to qi_desc_piotlb() not npages
iommu/vt-d: Split piotlb invalidation into range and all
iommu/vt-d: Remove dmar_writel() and dmar_writeq()
iommu/vt-d: Remove dmar_readl() and dmar_readq()
iommufd/selftest: Test dirty tracking on PASID
iommu/vt-d: Support dirty tracking on PASID
iommu/vt-d: Rename device_set_dirty_tracking() and pass dmar_domain pointer
iommu/vt-d: Block PASID attachment to nested domain with dirty tracking
iommu/dma: Always allow DMA-FQ when iommupt provides the iommu_domain
iommu/riscv: Fix signedness bug
iommu/amd: Fix illegal cap/mmio access in IOMMU debugfs
iommu/amd: Fix illegal device-id access in IOMMU debugfs
iommu/tegra241-cmdqv: Update uAPI to clarify HYP_OWN requirement
iommu/tegra241-cmdqv: Set supports_cmd op in tegra241_vcmdq_hw_init()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Misc code cleanups related to tag checking and tag command completion
(Damien)
- Remove Baikal bt1-ahci DT binding since the upstreaming for this SoC
is not going to be finalized (Andy)
- Only call the libata port error handler from the SCSI error handler
if there were command timeouts or if EH was scheduled for the port
(Damien)
- Refactor ata_scsiop_maint_in() to more clearly show that there is
only one service action implemented for the MAINTENANCE IN command
(me)
- Clean up the handling of sysfs attributes exposed by libata (Heiner)
- Let libahci_platform use a flexible array member for platform PHYs to
avoid multiple allocations (Rosen)
- Do not retry reset if the device has been removed/hot-unplugged
(Igor)
- Add missing newlines to error prints in pata_arasan_cf driver (Haoyu)
- Use the correct SCSI host byte when completing deferred ATA
PASS-THROUGH commands, to avoid the SCSI mid-layer from failing the
commands instead of requeuing (Igor)
* tag 'ata-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: fix requeue of deferred ATA PASS-THROUGH commands
ata: pata_arasan_cf: fix missing newline in dev_err() messages
ata: libata-transport: remove static variable ata_scsi_transport_template
ata: libata-transport: split struct ata_internal
ata: libata-transport: use static struct ata_transport_internal to simplify match functions
ata: libata-transport: inline ata_attach|release_transport
ata: libata-transport: instantiate struct ata_internal statically
ata: libata-eh: Do not retry reset if the device is gone
ata: libahci_platform: use flex array for platform PHYs
ata: libata-transport: remove redundant dynamic sysfs attributes
ata: libata-scsi: refactor ata_scsiop_maint_in()
ata: libata-eh: avoid unnecessary calls to ata_scsi_port_error_handler()
ata: ahci-dwc: Remove not-going-to-be-supported code for Baikal SoC
ata: libata-scsi: rename and improve ata_qc_done()
ata: libata-scsi: make ata_scsi_simulate() static
ata: libata-scsi: simplify ata_scsi_requeue_deferred_qc()
ata: libata-sata: simplify ata_sas_queuecmd()
ata: libata-core: improve tag checks in ata_qc_issue()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Allow TLP Processing Hints to be enabled for RCiEPs (George Abraham
P)
- Enable AtomicOps only if we know the Root Port supports them (Gerd
Bayer)
- Don't enable AtomicOps for RCiEPs since none of them need Atomic
Ops and we can't tell whether the Root Complex would support them
(Gerd Bayer)
- Leave Precision Time Measurement disabled until a driver enables it
to avoid PCIe errors (Mika Westerberg)
- Make pci_set_vga_state() fail if bridge doesn't support VGA
routing, i.e., PCI_BRIDGE_CTL_VGA is not writable, and return
errors to vga_get() callers including userspace via
/dev/vga_arbiter (Simon Richter)
- Validate max-link-speed from DT in j721e, brcmstb, mediatek-gen3,
rzg3s drivers (where the actual controller constraints are known),
and remove validation from the generic OF DT accessor (Hans Zhang)
- Remove pc110pad driver (no longer useful after 486 CPU support
removed) and no_pci_devices() (pc110pad was the last user) (Dmitry
Torokhov, Heiner Kallweit)
Resource management:
- Prevent assigning space to unimplemented bridge windows; previously
we mistakenly assumed prefetchable window existed and assigned
space and put a BAR there (Ahmed Naseef)
- Avoid shrinking bridge windows to fit in the initial Root Port
window; fixes one problem with devices with large BARs connected
via switches, e.g., Thunderbolt (Ilpo Järvinen)
- Pass full extent of empty space, not just the aligned space, to
resource_alignf callback so free space before the requested
alignment can be used (Ilpo Järvinen)
- Place small resources before larger ones for better utilization of
address space (Ilpo Järvinen)
- Fix alignment calculation for resource size larger than align,
e.g., bridge windows larger than the 1MB required alignment (Ilpo
Järvinen)
Reset:
- Update slot handling so all ARI functions are treated as being in
the same slot. They're all reset by Secondary Bus Reset, but
previously drivers of ARI functions that appeared to be on a
non-zero device weren't notified and fatal hardware errors could
result (Keith Busch)
- Make sysfs reset_subordinate hotplug safe to avoid spurious hotplug
events (Keith Busch)
- Hide Secondary Bus Reset ('bus') from sysfs reset_methods if masked
by CXL because it has no effect (Vidya Sagar)
- Avoid FLR for AMD NPU device, where it causes the device to hang
(Lizhi Hou)
Error handling:
- Clear only error bits in PCIe Device Status to avoid accidentally
clearing Emergency Power Reduction Detected (Shuai Xue)
- Check for AER errors even in devices without drivers (Lukas Wunner)
- Initialize ratelimit info so DPC and EDR paths log AER error
information (Kuppuswamy Sathyanarayanan)
Power control:
- Add UPD720201/UPD720202 USB 3.0 xHCI Host Controller .compatible so
generic pwrctrl driver can control it (Neil Armstrong)
Hotplug:
- Set LED_HW_PLUGGABLE for NPEM hotplug-capable ports so LED core
doesn't complain when setting brightness fails because the endpoint
is gone (Richard Cheng)
Peer-to-peer DMA:
- Allow wildcards in list of host bridges that support peer-to-peer
DMA between hierarchy domains and add all Google SoCs (Jacob
Moroni)
Endpoint framework:
- Advertise dynamic inbound mapping support in pci-epf-test and
update host pci_endpoint_test to skip doorbell testing if not
advertised by endpoint (Koichiro Den)
- Return 0, not remaining timeout, when MHI eDMA ops complete so
mhi_ep_ring_add_element() doesn't interpret non-zero as failure
(Daniel Hodges)
- Remove vntb and ntb duplicate resource teardown that leads to oops
when .allow_link() fails or .drop_link() is called (Koichiro Den)
- Disable vntb delayed work before clearing BAR mappings and
doorbells to avoid oops caused by doing the work after resources
have been torn down (Koichiro Den)
- Add a way to describe reserved subregions within BARs, e.g.,
platform-owned fixed register windows, and use it for the RK3588
BAR4 DMA ctrl window (Koichiro Den)
- Add BAR_DISABLED for BARs that will never be available to an EPF
driver, and change some BAR_RESERVED annotations to BAR_DISABLED
(Niklas Cassel)
- Add NTB .get_dma_dev() callback for cases where DMA API requires a
different device, e.g., vNTB devices (Koichiro Den)
- Add reserved region types for MSI-X Table and PBA so Endpoint
controllers can them as describe hardware-owned regions in a
BAR_RESERVED BAR (Manikanta Maddireddy)
- Make Tegra194/234 BAR0 programmable and remove 1MB size limit
(Manikanta Maddireddy)
- Expose Tegra BAR2 (MSI-X) and BAR4 (DMA) as 64-bit BAR_RESERVED
(Manikanta Maddireddy)
- Add Tegra194 and Tegra234 device table entries to pci_endpoint_test
(Manikanta Maddireddy)
- Skip the BAR subrange selftest if there are not enough inbound
window resources to run the test (Christian Bruel)
New native PCIe controller drivers:
- Add DT binding and driver for Andes QiLai SoC PCIe host controller
(Randolph Lin)
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan
Zhang)
Baikal T-1 PCIe controller driver:
- Remove driver since it never quite became usable (Andy Shevchenko)
Cadence PCIe controller driver:
- Implement byte/word config reads with dword (32-bit) reads because
some Cadence controllers don't support sub-dword accesses (Aksh
Garg)
CIX Sky1 PCIe controller driver:
- Add 'power-domains' to DT binding for SCMI power domain (Gary Yang)
Freescale i.MX6 PCIe controller driver:
- Add i.MX94 and i.MX943 to fsl,imx6q-pcie-ep DT binding (Richard
Zhu)
- Delay instead of polling for L2/L3 Ready after PME_Turn_off when
suspending i.MX6SX because LTSSM registers are inaccessible
(Richard Zhu)
- Separate PERST# assertion (for resetting endpoints) from core reset
(for resetting the RC itself) to prepare for new DTs with PERST#
GPIO in per-Root Port nodes (Sherry Sun)
- Retain Root Port MSI capability on i.MX7D, i.MX8MM, and i.MX8MQ so
MSI from downstream devices will work (Richard Zhu)
- Fix i.MX95 reference clock source selection when internal refclk is
used (Franz Schnyder)
Freescale Layerscape PCIe controller driver:
- Allow building as a removable module (Sascha Hauer)
MediaTek PCIe Gen3 controller driver:
- Use dev_err_probe() to simplify error paths and make deferred probe
messages visible in /sys/kernel/debug/devices_deferred (Chen-Yu
Tsai)
- Power off device if setup fails (Chen-Yu Tsai)
- Integrate new pwrctrl API to enable power control for WiFi/BT
adapters on mainboard or in PCIe or M.2 slots (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Disable LTSSM after transition to Detect on surprise link down to
stop toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending
or shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not
registered in Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change
is controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0
latency (Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234
erratum (Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB
timeout (Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side
can bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state
from any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so
DMA driver and Endpoint controller driver can share the interrupt
line (Vidya Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint
modes (Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint
mode (Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya
Sagar)
Qualcomm PCIe controller driver:
- Advertise 'Hot-Plug Capable' and set 'No Command Completed Support'
since Qcom Root Ports support hotplug events like DL_Up/Down and
can accept writes to Slot Control without delays between writes
(Krishna Chaitanya Chundru)
Renesas R-Car PCIe controller driver:
- Mark Endpoint BAR0 and BAR2 as Resizable (Koichiro Den)
- Reduce EPC BAR alignment requirement to 4K (Koichiro Den)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/G3E to DT binding and to driver (John Madieu)
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than
intended region and enforce alignment on size, to prepare for
RZ/G3E support (John Madieu)
Rockchip DesignWare PCIe controller driver:
- Add tracepoints for PCIe controller LTSSM transitions and link rate
changes (Shawn Lin)
- Trace LTSSM events collected by the dw-rockchip debug FIFO (Shawn
Lin)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2042 PCIe Root Ports that
advertise support for them (Yao Zi)
Synopsys DesignWare PCIe controller driver:
- Continue with system suspend even if an Endpoint doesn't respond
with PME_TO_Ack message (Manivannan Sadhasivam)
- Set Endpoint MSI-X Table Size in the correct function of a
multi-function device when configuring MSI-X, not in Function 0
(Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
Miscellaneous:
- Warn only once about invalid ACS kernel parameter format (Richard
Cheng)
- Suppress FW_BUG warning when writing sysfs 'numa_node' with the
current value (Li RongQing)
- Drop redundant 'depends on PCI' from Kconfig (Julian Braha)"
* tag 'pci-v7.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (165 commits)
PCI/P2PDMA: Add Google SoCs to the P2P DMA host bridge list
PCI/P2PDMA: Allow wildcard Device IDs in host bridge list
PCI: sg2042: Avoid L0s and L1 on Sophgo 2042 PCIe Root Ports
PCI: cadence: Add flags for disabling ASPM capability for broken Root Ports
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Lenovo Yoga/Legion fan monitoring (yogafan)
- LattePanda Sigma EC
- Infineon XDP720 eFuse
- Microchip MCP998X
New device support:
- TI INA234
- Infineon XDPE1A2G5B/7B
- Renesas RAA228942 and RAA228943 (isl68137)
- Delta Q54SN120A1 and Q54SW120A7 (pmbus)
- TI TMP110 and TMP113 (tmp102)
- Sony APS-379 (pmbus)
- ITE IT8689E (it87)
- ASUS ROG STRIX Z790-H, X470-F, and CROSSHAIR X670E (asus-ec-sensors)
- GPD Win 5 (gpd-fan)
Modernization and Cleanups:
- Convert asus_atk0110 and acpi_power_meter ACPI drivers to platform
drivers
- Remove i2c_match_id() usage in many PMBus drivers
- Use guard() for mutex protection in pmbus_core
- Replace sprintf() with sysfs_emit() in ads7871, emc1403, max6650,
ads7828, max31722, and tc74
- Various markup and documentation improvements for yogafan and
ltc4282
Bug fixes:
- Fix use-after-free and missing usb_kill_urb on disconnect in powerz
driver
- Avoid cacheline sharing for DMA buffer in powerz driver
- Fix integer overflow in power calculation on 32-bit in isl28022
driver
- Fix bugs in pt5161l_read_block_data()
- Propagate SPI errors and fix incorrect error codes in ads7871
driver
- Fix i2c_smbus_write_byte_data wrapper argument type in max31785
driver
Device tree bindings:
- Convert npcm750-pwm-fan to DT schema
- Add bindings for Infineon XDP720, Microchip MCP998X, Sony APS-379,
Renesas RAA228942/3, Delta Q54SN120A1/7, XDPE1A2G5B/7B, Aosong
AHT10/20, DHT20, and TI INA234
- Adapt moortec,mr75203 bindings for T-Head TH1520"
* tag 'hwmon-for-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (82 commits)
hwmon: (ina233) Don't check for specific errors when parsing properties
hwmon: (isl28022) Don't check for specific errors when parsing properties
hwmon: (pmbus/tps25990) Don't check for specific errors when parsing properties
hwmon: (nct6683) Add customer ID for ASRock B650I Lightning WiFi
hwmon:(pmbus/xdp720) Add support for efuse xdp720
dt-bindings: hwmon/pmbus: Add Infineon XDP720
hwmon: add support for MCP998X
dt-bindings: hwmon: add support for MCP998X
hwmon: (powerz) Avoid cacheline sharing for DMA buffer
hwmon: (isl28022) Fix integer overflow in power calculation on 32-bit
hwmon: (pt5161l) Fix bugs in pt5161l_read_block_data()
hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt
hwmon: (powerz) Fix use-after-free on USB disconnect
hwmon: pmbus: Add support for Sony APS-379
dt-bindings: trivial-devices: Add sony,aps-379
hwmon: (yogafan) various markup improvements
hwmon: (sparx5) Make it selectable for ARCH_LAN969X
hwmon: (tmp102) add support for update interval
hwmon: (yogafan) fix markup warning
hwmon: (yogafan) Add support for Lenovo Yoga/Legion fan monitoring
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"A busy release for SPI, almost all of it in a couple of larger fix and
cleanup series for patterns that affected many drivers. We do have a
couple of core API additions as well, relatively application specific
but they enable some new use cases.
- A packed command operation for spi-mem devices
- Improvements to the ancillary device support to enable some IIO use
cases from Antoniu Miclaus
- Fixes for a registration ordering issue pattern caused by the
handover between allocation and registration of controllers in
concert with devm from Johan Hovold
- Improvements to handling of clock allocation from Pei Xiao
- Cleanups in the fsl-lpspi driver from Marc Kleine-Budde
- Support for Renesas RZ/G3E and RZ/G3L"
* tag 'spi-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (115 commits)
spi: sn-f-ospi: fix incorrect return code for invalid num-cs
spi: spi-mem: Add a packed command operation
spi: cadence-qspi: Revert the filtering of certain opcodes in ODTR
spi: mtk-snfi: unregister ECC engine on probe failure and remove() callback
spi: s3c64xx: fix NULL-deref on driver unbind
spi: zynq-qspi: fix controller deregistration
spi: zynqmp-gqspi: fix controller deregistration
spi: uniphier: fix controller deregistration
spi: ti-qspi: fix controller deregistration
spi: tegra20-sflash: fix controller deregistration
spi: tegra114: fix controller deregistration
spi: syncuacer: fix controller deregistration
spi: sun6i: fix controller deregistration
spi: sun4i: fix controller deregistration
spi: st-ssc4: fix controller deregistration
spi: sprd: fix controller deregistration
spi: slave-mt27xx: fix controller deregistration
spi: sifive: fix controller deregistration
spi: sh-msiof: fix controller deregistration
spi: sh-hspi: fix controller deregistration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This has been a very quiet update for the regulator API, the bulk of
the diffstat is DT binding conversions and the most promient series in
the changelog is Johan Hovold cleaning up some leaks of OF nodes. For
some reason we have had several different people sending improvements
to better describe the parent supplies for existing regulators, these
look to be independent efforts.
The only new hardware support is for some Motorola custom varints of
cpcap"
* tag 'regulator-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (35 commits)
regulator: max77620: drop redundant OF node initialisation
regulator: bq257xx: Make OTG enable GPIO really optional
regulator: bq257xx: Remove reference to the parent MFD's dev
regulator: bd9571mwv: fix OF node reference imbalance
regulator: act8945a: fix OF node reference imbalance
regulator: s2dos05: fix OF node reference imbalance
regulator: mt6357: fix OF node reference imbalance
regulator: max77650: fix OF node reference imbalance
regulator: rk808: fix OF node reference imbalance
regulator: bq257xx: fix OF node reference imbalance
regulator: dt-bindings: qcom,qca6390-pmu: Document WCN6755 PMU
regulator: dt-bindings: regulator-max77620: convert to DT schema
regulator: mt6315: Add regulator supplies
regulator: dt-bindings: mt6315: Add regulator supplies
regulator: devres: Use enum regulator_get_type in internal functions
regulator: dt-bindings: mps,mp8859: convert to DT schema
regulator: da9121: Allow caching BUCK registers
regulator: dt-bindings: dlg,da9121: Add dlg,no-gpio-control
regulator: cros-ec: Add regulator supply
regulator: dt-bindings: cros-ec: Add regulator supply
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Extend statistics for domain idle states with s2idle data
- Show latency/residency for domain idle states in debugfs
pmdomain providers:
- imx: Add support for optional subnodes for imx93-blk-ctrl
- marvell: Add audio power island for Marvell PXA1908
- mediatek:
- Add legacy support for the MT7622 audio power domain
- Add nvmem provider functionality to the mtk-mfg-pmdomain
- Add support for the MT8189 power domains
- qcom: Add support for the Eliza and Hawi power domains
- sunxi: Add support for the Allwinner A733 power domains
- ti: Handle wakeup constraints for out-of-band wakeups for ti_sci"
* tag 'pmdomain-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (32 commits)
pmdomain: qcom: rpmhpd: Add power domains for Hawi SoC
dt-bindings: power: qcom,rpmhpd: Add RPMh power domain for Hawi SoC
pmdomain: qcom: cpr: add COMPILE_TEST support
PM: domains: De-constify fields in struct dev_pm_domain_attach_data
pmdomain: qcom: cpr: simplify main allocation
pmdomain: bcm: bcm2835-power: Replace open-coded polling with readl_poll_timeout_atomic()
pmdomain: sunxi: Add support for A733 to Allwinner PCK600 driver
pmdomain: qcom: rpmhpd: Add Eliza RPMh Power Domains
pmdomain: arm: Add print after a successful probe for SCMI power domains
pmdomain: rockchip: quiet regulator error on -EPROBE_DEFER
pmdomain: mediatek: Add power domain driver for MT8189 SoC
pmdomain: mediatek: Add bus protect control flow for MT8189
pmdomain: core: Extend statistics for domain idle states with s2idle data
pmdomain: core: Show latency/residency for domain idle states in debugfs
pmdomain: core: Restructure domain idle states data for genpd in debugfs
pmdomain: qcom: rpmpd: drop stray semicolon
pmdomain: imx: scu-pd: Fix device_node reference leak during ->probe()
pmdomain: ti: omap_prm: Fix a reference leak on device node
pmdomain: mediatek: scpsys: Add MT7622 Audio power domain to legacy driver
pmdomain: mediatek: Simplify with scoped for each OF child loop
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add NXP vendor and IW61x device IDs for WiFi chips over SDIO
- Add quirk for incorrect manufacturing date
- Add support for manufacturing date beyond 2025
- Optimize support for secure erase/trim for some Kingston eMMCs
- Remove support for the legacy "enable-sdio-wakeup" DT property
- Use single block writes in the retry path
MMC host:
- dw_mmc:
- A great amount of cleanups/simplifications to improve the code
- Add clk_phase_map support
- Remove mshc DT alias support
- dw_mmc-rockchip:
- Fix runtime PM support for internal phase
- Add support for the RV1103B variant
- loongson2:
- Add support for the Loongson-2K0300 SD/SDIO/eMMC controller
- mtk-sd:
- Add support for the MT8189 variant
- renesas_sdhi_core:
- Add support for selecting an optional mux
- rtsx_pci_sdmmc:
- Simplify voltage switch handling
- sdhci:
- Stop advertising the driver in dmesg
- sdhci-esdhc-imx:
- Add 1-bit bus width support
- Add support for the NXP S32N79 variant
- sdhci-msm:
- Add support for the IPQ5210 and IPQ9650 variants
- Add support for wrapped keys
- Enable ICE for CQE-capable controllers with non-CQE cards
- sdhci-of-arasan:
- Add support for the Axiado AX3000 variant
- sdhci-of-aspeed:
- Add support for the AST2700 variant
- sdhci-of-bst:
- Add driver for the Black Sesame Technologies C1200 controller
- sdhci-of-dwcmshc:
- Add support for the Canaan K230 variant
- Add support for the HPE GSC variant
- Prevent clock glitches to avoid malfunction
- sdhci-of-k1:
- Add support for the K3 variant
mux core/consumers:
- core:
- Add helper functions for getting optional and selected mux-state
- i2c-omap:
- Convert to devm_mux_state_get_optional_selected()
- phy-renesas:
- Convert to devm_mux_state_get_optional_selected()
- phy-can-transceiver:
- Convert to devm_mux_state_get_optional()"
* tag 'mmc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (131 commits)
mmc: sdhci-msm: Fix the wrapped key handling
mmc: sdhci-of-dwcmshc: Disable clock before DLL configuration
mmc: core: Simplify with scoped for each OF child loop
mmc: core: Optimize size of struct mmc_queue_req
mmc: vub300: clean up module init
mmc: vub300: rename probe error labels
mmc: dw_mmc: Remove dw_mci_start_request wrapper and rename core function
mmc: dw_mmc: Inline dw_mci_queue_request() into dw_mci_request()
mmc: block: Use MQRQ_XFER_SINGLE_BLOCK for both read and write recovery
mmc: mmc_test: Replace hard-coded values with macros and consolidate test parameters
mmc: block: Convert to use DEFINE_SIMPLE_DEV_PM_OPS()
mmc: core: Replace the hard-coded shift value 9 with SECTOR_SHIFT
mmc: sdhci-dwcmshc: Refactor Rockchip platform data for controller revisions
mmc: core: Switch to use pm_ptr() for mmc_host_class_dev_pm_ops
mmc: core: Remove legacy 'enable-sdio-wakeup' DT property support
mmc: mmc_test: use kzalloc_flex
mmc: mtk-sd: disable new_tx/rx and modify related settings for mt8189
dt-bindings: mmc: hisilicon,hi3660-dw-mshc: Convert to DT schema
dt-bindings: mmc: sdhci-msm: add IPQ9650 compatible
mmc: block: use single block write in retry
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"Just two minor fixes, a device tree binding addition to support a few
more SoCs (without the need for driver adaptions), a driver include
cleanup and the addition of the #linux-pwm irc channel to MAINTAINERS"
* tag 'pwm/for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: th1520: fix `CLIPPY=1` warning
pwm: jz4740: Drop unused include
MAINTAINERS: Add #linux-pwm irc channel to pwm entry
dt-bindings: pwm: amlogic: Document A4 A5 and T7 PWM
pwm: imx-tpm: Count the number of enabled channels in probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Nothing too thrilling here, but we see lots of driver updates and bug
fixes, including quirk additions and refactoring works, while there
have been little changes in the core functionality. Here are some
highlights:
Core:
- Add validation for the control API put callback
- Fixes in compress-offload API timestamp handling
- Continued ASoC core API cleanups
ASoC:
- Add support for bus keepers (for Apple devices in future)
- Enhancements to the SDCA support, including retaskable jacks
- Test improvements for Cirrus Logic drivers
- Lots of fixes for the NXP, nVidia and Qualcomm
- Support for AMD RPL DMIC, Cirrus Logic CS42L43 and CS47L47, nVidia
machines with CPCAP and WM8962
USB-audio:
- Quirks for Huawei Headset, Focusrite Novation, MV-Silicon, Studio
1824, Arturia AF16Rig, Hotone Audio, Feaulle Rainbow, PreSonus
AudioBox, Moondrop Ju Jiu, Scarlett 18i20, etc
- Extended mixer volume quirk handling
- UAF and other fixes for us144mkii, 6fire and caiaq drivers
HD-audio:
- Add quirks or fixes for Acer, Lenovo, HP, ASUS machines
- Fixes & cleanups of GPIO helper code
Misc:
- Add suspend/resume support for multiple legacy ISA and Apple
drivers
- Further regression fixes for ctxfi driver"
* tag 'sound-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (359 commits)
ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names()
ALSA: usb-audio: Fix missing error handling for get_min_max*()
ALSA: hda/realtek - fixed speaker no sound update
ALSA: hda/realtek: Add quirk for Acer PT316-51S headset mic
ALSA: usb-audio: Exclude Scarlett 18i20 1st Gen from SKIP_IFACE_SETUP
ALSA: hda/realtek: Add quirk for Legion S7 15IMH
ALSA: hda/realtek: Add quirk for HP Spectre x360 14-ea
ALSA: caiaq: take a reference on the USB device in create_card()
ASoC: dt-bindings: rockchip: convert rk3399-gru-sound to DT Schema
ALSA: sscape: Add suspend and resume support
ALSA: sscape: Cache per-card resources for board reinitialization
ALSA: usb-audio: Do not expose sticky mixers
ALSA: usb-audio: Move volume control resolution check into a function
ALSA: usb-audio: Add error checks against get_min_max*()
ALSA: usb-audio: Add quirk for PreSonus AudioBox USB
ALSA: interwave: guard PM-only restore helpers with CONFIG_PM
ALSA: usb-audio: Evaluate packsize caps at the right place
ALSA: sc6000: Restore board setup across suspend
ALSA: sc6000: Keep the programmed board state in card-private data
ALSA: 6fire: fix use-after-free on disconnect
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- new DRM RAS infrastructure using netlink
- amdgpu: enable DC on CIK APUs, and more IP enablement, and more
user queue work
- xe: purgeable BO support, and new hw enablement
- dma-buf : add revocable operations
Full summary:
mm:
- two-pass MMU interval notifiers
- add gpu active/reclaim per-node stat counters
math:
- provide __KERNEL_DIV_ROUND_CLOSEST() in UAPI
- implement DIV_ROUND_CLOSEST() with __KERNEL_DIV_ROUND_CLOSEST()
rust:
- shared tag with driver-core: register macro and io infra
- core: rework DMA coherent API
- core: add interop::list to interop with C linked lists
- core: add more num::Bounded operations
- core: enable generic_arg_infer and add EMSGSIZE
- workqueue: add ARef<T> support for work and delayed work
- add GPU buddy allocator abstraction
- add DRM shmem GEM helper abstraction
- allow drm:::Device to dispatch work and delayed work items
to driver private data
- add dma_resv_lock helper and raw accessors
core:
- introduce DRM RAS infrastructure over netlink
- add connector panel_type property
- fourcc: add ARM interleaved 64k modifier
- colorop: add destroy helper
- suballoc: split into alloc and init helpers
- mode: provide DRM_ARGB_GET*() macros for reading color components
edid:
- provide drm_output_color_Format
dma-buf:
- provide revoke mechanism for shared buffers
- rename move_notify to invalidate_mappings
- always enable move_notify
- protect dma_fence_ops with RCU and improve locking
- clean pages with helpers
atomic:
- allocate drm_private_state via callback
- helper: use system_percpu_wq
buddy:
- make buddy allocator available to gpu level
- add kernel-doc for buddy allocator
- improve aligned allocation
ttm:
- fix fence signalling
- improve tests and docs
- improve handling of gfp_retry_mayfail
- use per-node stat counters to track memory allocations
- port pool to use list_lru
- drop NUMA specific pools
- make pool shrinker numa aware
- track allocated pages per numa node
coreboot:
- cleanup coreboot framebuffer support
sched:
- fix race condition in drm_sched_fini
pagemap:
- enable THP support
- pass pagemap_addr by reference
gem-shmem:
- Track page accessed/dirty status across mmap/vmap
gpusvm:
- reenable device to device migration
- fix unbalanced unclock
bridge:
- anx7625: Support USB-C plus DT bindings
- connector: Fix EDID detection
- dw-hdmi-qp: Support Vendor-Specfic and SDP Infoframes; improve
others
- fsl-ldb: Fix visual artifacts plus related DT property
'enable-termination-resistor'
- imx8qxp-pixel-link: Improve bridge reference handling
- lt9611: Support Port-B-only input plus DT bindings
- tda998x: Support DRM_BRIDGE_ATTACH_NO_CONNECTOR; Clean up
- Support TH1520 HDMI plus DT bindings
- waveshare-dsi: Fix register and attach; Support 1..4 DSI lanes plus
DT bindings
- anx7625: Fix USB Type-C handling
- cdns-mhdp8546-core: Handle HDCP state in bridge atomic_check
- Support Lontium LT8713SX DP MST bridge plus DT bindings
- analogix_dp: Use DP helpers for link training
panel:
- panel-jdi-lt070me05000: Use mipi-dsi multi functions
- panel-edp: Support Add AUO B116XAT04.1 (HW: 1A); Support CMN
N116BCL-EAK (C2); Support FriendlyELEC plus DT changes
- panel-edp: Fix timings for BOE NV140WUM-N64
- ilitek-ili9882t: Allow GPIO calls to sleep
- jadard: Support TAIGUAN XTI05101-01A
- lxd: Support LXD M9189A plus DT bindings
- mantix: Fix pixel clock; Clean up
- motorola: Support Motorola Atrix 4G and Droid X2 plus DT bindings
- novatek: Support Novatek/Tianma NT37700F plus DT bindings
- simple: Support EDT ET057023UDBA plus DT bindings; Support Powertip
PH800480T032-ZHC19 plus DT bindings; Support Waveshare 13.3"
- novatek-nt36672a: Use mipi_dsi_*_multi() functions
- panel-edp: Support BOE NV153WUM-N42, CMN N153JCA-ELK, CSW
MNF307QS3-2
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support
backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
amdgpu:
- enable DC by default on CIK APUs
- userq fence ioctl param size fixes
- set panel_type to OLED for eDP
- refactor DC i2c code
- FAMS2 update
- rework ttm handling to allow multiple engines
- DC DCE 6.x cleanup
- DC support for NUTMEG/TRAVIS DP bridge
- DCN 4.2 support
- GC12 idle power fix for compute
- use struct drm_edid in non-DC code
- enable NV12/P010 support on primary planes
- support newer IP discovery tables
- VCN/JPEG 5.0.2 support
- GC/MES 12.1 updates
- USERQ fixes
- add DC idle state manager
- eDP DSC seamless boot
amdkfd:
- GC 12.1 updates
- non 4K page fixes
xe:
- basic Xe3p_LPG and NVL-P enabling patches
- allow VM_BIND decompress support
- add purgeable buffer object support
- add xe_vm_get_property_ioctl
- restrict multi-lrc to VCS/VECS engines
- allow disabling VM overcommit in fault mode
- dGPU memory optimizations
- Workaround cleanups and simplification
- Allow VFs VRAM quote changes using sysfs
- convert GT stats to per-cpu counters
- pagefault refactors
- enable multi-queue on xe3p_xpc
- disable DCC on PTL
- make MMIO communication more robust
- disable D3Cold for BMG on specific platforms
- vfio: improve FLR sync for Xe VFIO
i915/display:
- C10/C20/LT PHY PLL divider verification
- use trans push mechanism to generate PSR frame change on LNL+
- refactor DP DSC slice config
- VGA decode refactoring
- refactor DPT, gen2-4 overlay, masked field register macro helpers
- refactor stolen memory allocation decisions
- prepare for UHBR DP tunnels
- refactor LT PHY PLL to use DPLL framework
- implement register polling/waiting in display code
- add shared stepping header between i915 and display
i915:
- fix potential overflow of shmem scatterlist length
nouveau:
- provide Z cull info to userspace
- initial GA100 support
- shutdown on PCI device shutdown
nova-core:
- harden GSP command queue
- add support for large RPCs
- simplify GSP sequencer and message handling
- refactor falcon firmware handling
- convert to new register macro
- conver to new DMA coherent API
- use checked arithmetic
- add debugfs support for gsp-rm log buffers
- fix aux device registration for multi-GPU
msm:
- CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
- Core:
- Switched to of_get_available_child_by_name()
- DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
- DP:
- Removed debug prints looking into PHY internals
- DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
- GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- HDMI:
- Fixed infoframes programming
- MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
panthor:
- add tracepoints for power and IRQs
- fix fence handling
- extend timestamp query with flags
- support various sources for timestamp queries
tyr:
- fix names and model/versions
rockchip:
- vop2: use drm logging function
- rk3576 displayport support
- support CRTC background color
atmel-hlcdc:
- support sana5d65 LCD controller
tilcdc:
- use DT bindings schema
- use managed DRM interfaces
- support DRM_BRIDGE_ATTACH_NO_CONNECTOR
verisilicon:
- support DC8200 + DT bindings
virtgpu:
- support PRIME import with 3D enabled
komeda:
- fix integer overflow in AFBC checks
mcde:
- improve bridge handling
gma500:
- use drm client buffer for fbdev framebuffer
amdxdna:
- add sensors ioctls
- provide NPU power estimate
- support column utilization sensor
- allow forcing DMA through IOMMU IOVA
- support per-BO mem usage queries
- refactor GEM implementation
ivpu:
- update boot API to v3.29.4
- limit per-user number of doorbells/contexts
- perform engine reset on TDR error
loongson:
- replace custom code with drm_gem_ttm_dumb_map_offset()
imx:
- support planes behind the primary plane
- fix bus-format selection
vkms:
- support CRTC background color
v3d:
- improve handling of struct v3d_stats
komeda:
- support Arm China Linlon D6 plus DT bindings
imagination:
- improve power-off sequence
- support context-reset notification from firmware
mediatek:
- mtk_dsi: enable hs clock during pre-enable
- Remove all conflicting aperture devices during probe
- Add support for mt8167 display blocks"
* tag 'drm-next-2026-04-15' of https://gitlab.freedesktop.org/drm/kernel: (1735 commits)
drm/ttm/tests: Remove checks from ttm_pool_free_no_dma_alloc
drm/ttm/tests: fix lru_count ASSERT
drm/vram: remove DRM_VRAM_MM_FILE_OPERATIONS from docs
drm/fb-helper: Fix a locking bug in an error path
dma-fence: correct kernel-doc function parameter @flags
ttm/pool: track allocated_pages per numa node.
ttm/pool: make pool shrinker NUMA aware (v2)
ttm/pool: drop numa specific pools
ttm/pool: port to list_lru. (v2)
drm/ttm: use gpu mm stats to track gpu memory allocations. (v4)
mm: add gpu active/reclaim per-node stat counters (v2)
gpu: nova-core: fix missing colon in SEC2 boot debug message
gpu: nova-core: vbios: use from_le_bytes() for PCI ROM header parsing
gpu: nova-core: bitfield: fix broken Default implementation
gpu: nova-core: falcon: pad firmware DMA object size to required block alignment
gpu: nova-core: gsp: fix undefined behavior in command queue code
drm/shmem_helper: Make sure PMD entries get the writeable upgrade
accel/ivpu: Trigger recovery on TDR with OS scheduling
drm/msm: Use of_get_available_child_by_name()
dt-bindings: display/msm: move DSI PHY bindings to phy/ subdir
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new CSI tegra support, covering Tegra20 and Tegra30
- new camera sensor drivers: T4ka3 and ov2732
- m88ds3103: add 3103c chip support
- uvcvideo: add support for Intel RealSense D436/D555 and P010 pixel format
- synopsys csi2rx: add i.MX93 support
- imx8-isi: add i.MX95 support
- imx8mq-mipi-csi2: add i.MX8ULP support
- dw100: add V4L2 requests support
- support for DTV devices from Hauppauge got some improvements
- media staging: dropped starfive-camss driver
- media docs: document multi-committers model and improve maint profile
- media core:
- add v4l2_subdev_get_frame_desc_passthrough() helper
- improve error handling in fwnode parsing
- lots of driver fixes, cleanups and improvements
* tag 'media/v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (251 commits)
Revert "media: cx231xx: add USB ID 2040:8360 for Hauppauge WinTV-HVR-935"
media: synopsys: csi2rx: add i.MX93 support
media: dt-bindings: add NXP i.MX93 compatible string
media: synopsys: csi2rx: Use enum and u32 array for register offsets
media: synopsys: csi2rx: implement .get_frame_desc() callback
media: synopsys: csi2rx: only check errors from devm_clk_bulk_get_all()
media: synopsys: csi2rx: use devm_reset_control_get_optional_exclusive()
media: i2c: imx283: add support for non-continuous MIPI clock mode
media: i2c: ov08d10: add support for 24 MHz input clock
media: i2c: ov08d10: add support for reset and power management
media: i2c: ov08d10: add support for binding via device tree
dt-bindings: media: i2c: document Omnivision OV08D10 CMOS image sensor
media: i2c: ov08d10: add missing newline to prints
media: i2c: ov08d10: fix some typos in comments
media: i2c: ov08d10: remove duplicate register write
media: i2c: ov08d10: fix image vertical start setting
media: i2c: ov08d10: fix runtime PM handling in probe
staging: media: ipu7: Update TODO
media: Add t4ka3 camera sensor driver
media: i2c: Add ov2732 image sensor driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
Wireless:
- Finished assoc frame encryption/EPPKE/802.1X-over-auth
- Radar detection improvements
- Add 6 GHz incumbent signal detection APIs
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- A large refactoring for the Renesas RZV2H driver to add new interrupt
types cleanly
- A large refactoring for the Renesas RZG2L driver to add support the
new RZ/G3L variant
- Add support for the new NXP S32N79 chip in the IMX irq-steer driver
- Add support for the Apple AICv3 variant
- Enhance the Loongson PCH LPC driver so it can be used on MIPS with
device tree firmware
- Allow the PIC32 EVIC driver to be built independent of MIPS in
compile tests
- The usual small fixes and enhancements all over the place
* tag 'irq-drivers-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqchip/irq-pic32-evic: Add __maybe_unused for board_bind_eic_interrupt in COMPILE_TEST
irqchip/renesas-rzv2h: Kill icu_err string
irqchip/renesas-rzv2h: Kill swint_names[]
irqchip/renesas-rzv2h: Kill swint_idx[]
irqchip/renesas-rzg2l: Add NMI support
irqchip/renesas-rzg2l: Clear the shared interrupt bit in rzg2l_irqc_free()
irqchip/renesas-rzg2l: Replace raw_spin_{lock,unlock} with guard() in rzg2l_irq_set_type()
irqchip/gic-v3: Print a warning for out-of-range interrupt numbers
irqchip/renesas-rzg2l: Add shared interrupt support
irqchip/renesas-rzg2l: Add RZ/G3L support
irqchip/renesas-rzg2l: Drop IRQC_IRQ_COUNT macro
irqchip/renesas-rzg2l: Drop IRQC_TINT_START macro
irqchip/renesas-rzg2l: Drop IRQC_NUM_IRQ macro
irqchip/renesas-rzg2l: Dynamically allocate fwspec array
irqchip/renesas-rzg2l: Split rzfive_irqc_{mask,unmask} into separate IRQ and TINT handlers
irqchip/renesas-rzg2l: Split rzfive_tint_irq_endisable() into separate IRQ and TINT helpers
irqchip/renesas-rzg2l: Replace rzg2l_irqc_irq_{enable,disable} with TINT-specific handlers
irqchip/renesas-rzg2l: Split set_type handler into separate IRQ and TINT functions
irqchip/renesas-rzg2l: Split EOI handler into separate IRQ and TINT functions
irqchip/renesas-rzg2l: Replace single irq_chip with per-region irq_chip instances
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"For this release we have an extension of the pwrseq-pcie-m2 driver
with support for PCIe M.2 Key E connectors.
The rest of the commits fulfill a supporting role: document the
hardware in DT bindings, provide required serdev helpers (this has
been provided in an immutable branch to Rob Herring so you may see it
in his PR as well) and is followed up by some Kconfig fixes from Arnd.
Summary:
- add support for the PCIe M.2 Key E connectors in pwrseq-pcie-m2
- describe PCIe M.2 Mechanical Key E connectors in DT bindings
- add serdev helpers for looking up devices by OF nodes
- minor serdev core rework to enable support for PCIe M.2 Key E
connectors"
* tag 'pwrseq-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: pcie-m2: add SERIAL_DEV_BUS dependency
power: sequencing: pcie-m2: enforce PCI and OF dependencies
power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth
power: sequencing: pcie-m2: Add support for PCIe M.2 Key E connectors
dt-bindings: connector: Add PCIe M.2 Mechanical Key E connector
dt-bindings: serial: Document the graph port
serdev: Do not return -ENODEV from of_serdev_register_devices() if external connector is used
serdev: Add an API to find the serdev controller associated with the devicetree node
serdev: Convert to_serdev_*() helpers to macros and use container_of_const()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"For this merge window we have two new drivers: support for
GPIO-signalled ACPI events on Intel platforms and a generic
GPIO-over-pinctrl driver using the ARM SCMI protocol for
controlling pins.
Several things have been reworked in GPIO core: we unduplicated GPIO
hog handling, reduced the number of SRCU locks and dereferences,
improved support for software-node-based lookup and removed more
legacy code after converting remaining users to modern alternatives.
There's also a number of driver reworks and refactoring, documentation
updates, some bug-fixes and new tests.
GPIO core:
- defer probe on software node lookups when the remote software node
exists but has not been registered as a firmware node yet
- unify GPIO hog handling by moving code duplicated in OF and ACPI
modules into GPIO core and allow setting up hogs with software
nodes
- allow matching GPIO controllers by secondary firmware node if
matching by primary does not succeed
- demote deferral warnings to debug level as they are quite normal
when using software nodes which don't support fw_devlink yet
- disable the legacy GPIO character device uAPI v1 supprt in Kconfig
by default
- rework several core functions in preparation for the upcoming
Revocable helper library for protecting resources against sudden
removal, this reduces the number of SRCU dereferences in GPIO core
- simplify file descriptor logic in GPIO character device code by
using FD_PREPARE()
- introduce a header defining symbols used by both GPIO consumers and
providers to avoid having to include provider-specific headers from
drivers which only consume GPIOs
- replace snprintf() with strscpy() where formatting is not required
New drivers:
- add the gpio-by-pinctrl generic driver using the ARM SCMI protocol
to control GPIOs (along with SCMI changes pulled from the pinctrl
tree)
- add a driver providing support for handling of platform events via
GPIO-signalled ACPI events (used on Intel Nova Lake and later
platforms)
Driver changes:
- extend the gpio-kempld driver with support for more recent models,
interrupts and setting/getting multiple values at once
- improve interrupt handling in gpio-brcmstb
- add support for multi-SoC systems in gpio-tegra186
- make sure we return correct values from the .get() callbacks in
several GPIO drivers by normalizing any values other than 0, 1 or
negative error numbers
- use flexible arrays in several drivers to reduce the number of
required memory allocations
- simplify synchronous waiting for virtual drivers to probe and
remove the dedicated, a bit overengineered helper library
dev-sync-probe
- remove unneeded Kconfig dependencies on OF_GPIO in several drivers
and subsystems
- convert the two remaining users of of_get_named_gpio() to using
GPIO descriptors and remove the (no longer used) function along
with the header that declares it
- add missing includes in gpio-mmio
- shrink and simplify code in gpio-max732x by using guard(mutex)
- remove duplicated code handling the 'ngpios' property from
gpio-ts4800, it's already handled in GPIO core
- use correct variable type in gpio-aspeed
- add support for a new model in gpio-realtek-otto
- allow to specify the active-low setting of simulated hogs over the
configfs interface (in addition to existing devicetree support) in
gpio-sim
Bug fixes:
- clear the OF_POPULATED flag on hog nodes in GPIO chip remove path
on OF systems
- fix resource leaks in error path in gpiochip_add_data_with_key()
- drop redundant device reference in gpio-mpsse
Tests:
- add selftests for use-after-free cases in GPIO character device
code
DT bindings:
- add a DT binding document for SCMI based, gpio-over-pinctrl devices
- fix interrupt description in microchip,mpfs-gpio
- add new compatible for gpio-realtek-otto
- describe the resets of the mpfs-gpio controller
- fix maintainer's email in gpio-delay bindings
- remove the binding document for cavium,thunder-8890 as the
corresponding device is bound over PCI and not firmware nodes
Documentation:
- update the recommended way of converting legacy boards to using
software nodes for GPIO description
- describe GPIO line value semantics
- misc updates to kerneldocs
Misc:
- convert OMAP1 ams-delta board to using GPIO hogs described with
software nodes"
* tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: swnode: defer probe on references to unregistered software nodes
dt-bindings: gpio: cavium,thunder-8890: Remove DT binding
Documentation: gpio: update the preferred method for using software node lookup
gpio: gpio-by-pinctrl: s/used to do/is used to do/
gpio: aspeed: fix unsigned long int declaration
gpio: rockchip: convert to dynamic GPIO base allocation
gpio: remove dev-sync-probe
gpio: virtuser: stop using dev-sync-probe
gpio: aggregator: stop using dev-sync-probe
gpio: sim: stop using dev-sync-probe
gpio: Add Intel Nova Lake ACPI GPIO events driver
gpiolib: Make deferral warnings debug messages
gpiolib: fix hogs with multiple lines
gpio: fix up CONFIG_OF dependencies
gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver
gpio: dt-bindings: Add GPIO on top of generic pin control
firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP
pinctrl: scmi: ignore PIN_CONFIG_PERSIST_STATE
pinctrl: scmi: Delete PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS support
pinctrl: scmi: Add SCMI_PIN_INPUT_VALUE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These include thermal core fixes and simplifications, driver fixes and
new hardware support (SDM670, Eliza SoC), new driver features (hwmon
support in imx91, DDR data rate on Nova Lake in int340x), and a
handful of cleanups:
- Fix thermal core issues related to thermal zone removal and
registration errors that may lead to a use-after-free or a memory
leak in some cases (Rafael Wysocki)
- Drop a redundant check from thermal_zone_device_update(), adjust
thermal workqueue allocation flags, and switch over thermal_class
allocation to static (Rafael Wysocki)
- Relocate the suspend and resume of thermal zones closer to the
suspend and resume of devices, respectively (Rafael Wysocki)
- Remove a pointless variable used in the thermal core when
registering a cooling device (Daniel Lezcano)
- Replace sprintf() in thermal_bind_cdev_to_trip() and use
str_enabled_disabled() helper in mode_show() (Thorsten Blum)
- Replace cpumask_weight() in intel_hfi_offline() with
cpumask_empty() which is generally more efficient (Yury Norov)
- Add support for reading DDR data rate from PCI config space on Nova
Lake platforms to the int340x thermal driver (Srinivas Pandruvada)
- Add an OF node address to output message to make sensor names more
distinguishable (Alexander Stein)
- Add hwmon support for the i.MX97 thermal sensor (Alexander Stein)
- Clamp correctly the results when doing value/temperature conversion
in the Spreadtrum driver (Thorsten Blum)
- Add SDM670 compatible DT bindings for the Tsens and the lMH thermal
drivers (Richard Acayan)
- Add SM8750 compatible DT bindings for the Tsens thermal driver
(Manaf Meethalavalappu Pallikunhi)
- Add Eliza SoC compatible DT bindings for the Tsens driver
(Krzysztof Kozlowski)
- Fix inverted condition check on error in the Spear thermal control
driver (Gopi Krishna Menon)
- Convert DT bindings documentation into DT schema (Gopi Krishna
Menon)
- Use max() macro to increase readability in the Broadcom STB thermal
sensor (Thorsten Blum)
- Remove a stale @trim_offset kernel-doc entry (John Madieu)"
* tag 'thermal-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
thermal: renesas: rzg3e: Remove stale @trim_offset kernel-doc entry
thermal: core: Suspend thermal zones later and resume them earlier
thermal: core: Allocate thermal_class statically
thermal: core: Adjust thermal_wq allocation flags
thermal: core: Drop redundant check from thermal_zone_device_update()
thermal: core: Free thermal zone ID later during removal
thermal: core: Fix thermal zone governor cleanup issues
thermal/core: Remove pointless variable when registering a cooling device
thermal/drivers/brcmstb_thermal: Use max to simplify brcmstb_get_temp
dt-bindings: thermal: st,thermal-spear1340: convert to dtschema
thermal/drivers/spear: Fix error condition for reading st,thermal-flags
dt-bindings: thermal: qcom-tsens: Add Eliza SoC TSENS
thermal: devfreq_cooling: avoid unnecessary kfree of freq_table
thermal: intel: hfi: use cpumask_empty() in intel_hfi_offline()
thermal: sysfs: Use str_enabled_disabled() helper in mode_show()
dt-bindings: thermal: qcom-tsens: Document the SM8750 Temperature Sensor
thermal/drivers/sprd: Use min instead of clamp in sprd_thm_temp_to_rawdata
dt-bindings: thermal: lmh: Add SDM670 compatible
dt-bindings: thermal: tsens: add SDM670 compatible
thermal/drivers/sprd: Fix raw temperature clamping in sprd_thm_rawdata_to_temp
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, cpufreq is the most active development area, mostly
because of the new feature additions and documentation updates in the
amd-pstate driver, but there are also changes in the cpufreq core
related to boost support and other assorted updates elsewhere.
Next up are power capping changes due to the major cleanup of the
Intel RAPL driver.
On the cpuidle front, a new C-states table for Intel Panther Lake is
added to the intel_idle driver, the stopped tick handling in the menu
and teo governors is updated, and there are a couple of cleanups.
Apart from the above, support for Tegra114 is added to devfreq and
there are assorted cleanups of that code, there are also two updates
of the operating performance points (OPP) library, two minor updates
related to hibernation, and cpupower utility man pages updates and
cleanups.
Specifics:
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic
EPP, Raw EPP, and new unit tests for them to amd-pstate (Gautham
Shenoy, Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate
which leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add
a boost_freq_req QoS request to save the boost constraint instead
of overwriting the last scaling_max_freq constraint (Pierre
Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury
Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is
written to its status sysfs attribute while the driver is already
off (Fabio De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
- Refine stopped tick handling in the menu cpuidle governor and
rearrange stopped tick handling in the teo cpuidle governor (Rafael
Wysocki)
- Add Panther Lake C-states table to the intel_idle driver (Artem
Bityutskiy)
- Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)
- Simplify cpuidle_register_device() with guard() (Huisong Li)
- Use performance level if available to distinguish between rates in
OPP debugfs (Manivannan Sadhasivam)
- Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)
- Return -ENODATA if the snapshot image is not loaded (Alberto
Garcia)
- Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
Biggers)
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping
core code (Randy Dunlap)
- Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko)
- Use _visible attribute to replace create/remove_sysfs_files() in
devfreq (Pengjie Zhang)
- Add Tegra114 support to activity monitor device in tegra30-devfreq
as a preparation to upcoming EMC controller support (Svyatoslav
Ryhel)
- Fix mistakes in cpupower man pages, add the boost and epp options
to the cpupower-frequency-info man page, and add the perf-bias
option to the cpupower-info man page (Roberto Ricci)
- Remove unnecessary extern declarations from getopt.h in arguments
parsing functions in cpufreq-set, cpuidle-info, cpuidle-set,
cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)"
* tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
cpupower: remove extern declarations in cmd functions
cpuidle: Simplify cpuidle_register_device() with guard()
PM / devfreq: tegra30-devfreq: add support for Tegra114
PM / devfreq: use _visible attribute to replace create/remove_sysfs_files()
PM / devfreq: Remove unneeded casting for HZ_PER_KHZ
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
...
|
|
- Assert (not deassert) resets in probe error path (John Madieu)
- Assert resets in suspend path in reverse order they were deasserted
during probe (John Madieu)
- Rework inbound window algorithm to prevent mapping more than intended
region and enforce alignment on size, to prepare for RZ/G3E support (John
Madieu)
- Fix renesas,r9a08g045s33-pcie 'serr_cor' typo and convert properties from
'description' to 'const' for better validation (John Madieu)
- Add RZ/G3E to DT binding and to driver (John Madieu)
* pci/controller/rzg3s-host:
PCI: rzg3s-host: Add support for RZ/G3E PCIe controller
PCI: rzg3s-host: Add PCIe Gen3 (8.0 GT/s) link speed support
PCI: rzg3s-host: Explicitly set class code for RZ/G3E compatibility
PCI: rzg3s-host: Add SoC-specific configuration and initialization callbacks
PCI: rzg3s-host: Make configuration reset lines optional
PCI: rzg3s-host: Make SYSC register offsets SoC-specific
dt-bindings: PCI: renesas,r9a08g045s33-pcie: Document RZ/G3E SoC
dt-bindings: PCI: renesas,r9a08g045s33-pcie: Fix naming properties
PCI: rzg3s-host: Rework inbound window algorithm for supporting RZ/G3E SoC
PCI: rzg3s-host: Reorder reset assertion during suspend
PCI: rzg3s-host: Fix reset handling in probe error path
# Conflicts:
# drivers/pci/controller/pcie-rzg3s-host.c
|
|
- Poll less aggressively and non-atomically for PME_TO_Ack during
transition to L2 (Vidya Sagar)
- Increase LTSSM poll time on surprise link down (Manikanta Maddireddy)
- Disable LTSSM after transition to Detect on surprise link down to stop
toggling between Polling and Detect (Manikanta Maddireddy)
- Don't force the device into the D0 state before L2 when suspending or
shutting down the controller (Vidya Sagar)
- Disable PERST# IRQ only in Endpoint mode because it's not registered in
Root Port mode (Manikanta Maddireddy)
- Handle 'nvidia,refclk-select' as optional (Vidya Sagar)
- Disable direct speed change in Endpoint mode so link speed change is
controlled by the host (Vidya Sagar)
- Set LTR values before link up to avoid bogus LTR messages with 0 latency
(Vidya Sagar)
- Allow system suspend when the Endpoint link is down (Vidya Sagar)
- During remove, free resources allocated during Endpoint .probe() (Vidya
Sagar)
- Use DWC IP core version, not Tegra custom values, to avoid DWC core
version check warnings (Manikanta Maddireddy)
- Apply ECRC workaround to devices based on DesignWare 5.00a as well
as 4.90a (Manikanta Maddireddy)
- Disable PM Substate L1.2 in Endpoint mode to work around Tegra234 erratum
(Vidya Sagar)
- Delay post-PERST# cleanup until core is powered on to avoid CBB timeout
(Manikanta Maddireddy)
- Assert CLKREQ# so switches that forward it to their downstream side can
bring up those links successfully (Vidya Sagar)
- Calibrate pipe to UPHY for Endpoint mode to reset stale PLL state from
any previous bad link state (Vidya Sagar)
- Remove IRQF_ONESHOT flag from Endpoint interrupt registration so DMA
driver and Endpoint controller driver can share the interrupt line (Vidya
Sagar)
- Enable DMA interrupt to support DMA in both Root Port and Endpoint modes
(Vidya Sagar)
- Enable hardware link retraining after link goes down in Endpoint mode
(Vidya Sagar)
- Add DT binding and driver support for core clock monitoring (Vidya Sagar)
* pci/controller/dwc-tegra194:
PCI: tegra194: Add core monitor clock support
dt-bindings: PCI: tegra194: Add monitor clock support
PCI: tegra194: Enable hardware hot reset mode in Endpoint mode
PCI: tegra194: Enable DMA interrupt
PCI: tegra194: Remove IRQF_ONESHOT flag during Endpoint interrupt registration
PCI: tegra194: Calibrate pipe to UPHY for Endpoint mode
PCI: tegra194: Assert CLKREQ# explicitly by default
PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on
PCI: tegra194: Disable L1.2 capability of Tegra234 EP
PCI: dwc: Apply ECRC workaround to DesignWare 5.00a as well
PCI: tegra194: Use DWC IP core version
PCI: tegra194: Free up Endpoint resources during remove()
PCI: tegra194: Allow system suspend when the Endpoint link is not up
PCI: tegra194: Set LTR message request before PCIe link up in Endpoint mode
PCI: tegra194: Disable direct speed change for Endpoint mode
PCI: tegra194: Use devm_gpiod_get_optional() to parse "nvidia,refclk-select"
PCI: tegra194: Disable PERST# IRQ only in Endpoint mode
PCI: tegra194: Don't force the device into the D0 state before L2
PCI: tegra194: Disable LTSSM after transition to Detect on surprise link down
PCI: tegra194: Increase LTSSM poll time on surprise link down
PCI: tegra194: Fix polling delay for L2 state
|
|
- Add DT binding and driver for ESWIN PCIe Root Complex (Senchuan Zhang)
* pci/controller/dwc-eswin:
PCI: eswin: Add ESWIN PCIe Root Complex driver
dt-bindings: PCI: eswin: Add ESWIN PCIe Root Complex
# Conflicts:
# drivers/pci/controller/dwc/Kconfig
# drivers/pci/controller/dwc/Makefile
|
|
- Add Andes QiLai SoC PCIe host driver support (Randolph Lin)
* pci/controller/dwc-andes-qilai:
PCI: qilai: Add Andes QiLai SoC PCIe host driver support
dt-bindings: PCI: Add Andes QiLai PCIe support
# Conflicts:
# drivers/pci/controller/dwc/Makefile
|
|
- Continue with system suspend even if an Endpoint doesn't respond with
PME_TO_Ack message (Manivannan Sadhasivam)
- Remove the Baikal-T1 controller driver since it never quite became usable
(Andy Shevchenko)
- Set Endpoint MSI-X Table Size in the correct function of a multi-function
device when configuring MSI-X, not in Function 0 (Aksh Garg)
- Set Max Link Width and Max Link Speed for all functions of a
multi-function device, not just Function 0 (Aksh Garg)
- Clean up in the dw_pcie_resume_noirq() error path (Manivannan Sadhasivam)
- Expose PCIe event counters in groups 5-7 in debugfs (Hans Zhang)
- Fix type mismatch for kstrtou32_from_user() in debugfs write functions
(Hans Zhang)
* pci/controller/dwc:
PCI: dwc: Fix type mismatch for kstrtou32_from_user() return value
PCI: dwc: Expose PCIe event counters for groups 5 to 7 over debugfs
PCI: dwc: Perform cleanup in the error path of dw_pcie_resume_noirq()
PCI: dwc: ep: Mirror the max link width and speed fields to all functions
PCI: dwc: ep: Fix MSI-X Table Size configuration in dw_pcie_ep_set_msix()
PCI: dwc: Remove not-going-to-be-supported code for Baikal SoC
PCI: dwc: Proceed with system suspend even if the endpoint doesn't respond with PME_TO_Ack message
|
|
Add support for the Milos SoC, which uses IPA v5.2.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20260410-ipa-v5-2-v2-1-778422a05060@fairphone.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This MDIO hardware is based on a Microsemi design supported in Linux by
mdio-mscc-miim.c. However, The register interface is completely different
with pic64hpsc, hence the need for separate documentation.
The hardware supports C22 and C45.
The documentation recommends an input clock of 156.25MHz and a prescaler
of 39, which yields an MDIO clock of 1.95MHz.
The hardware supports an interrupt pin to signal transaction completion
which is not strictly needed as the software can also poll a "TRIGGER"
bit for this.
Signed-off-by: Charles Perry <charles.perry@microchip.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260408131821.1145334-2-charles.perry@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, the binding requires 'spi-cpha' for SJA1105 and 'spi-cpol'
for SJA1110.
However, the SJA1110 supports both SPI modes 0 and 2. Mode 2
(cpha=0, cpol=1) is used by the NXP LX2160 Bluebox 3.
On the SolidRun i.MX8DXL HummingBoard Telematics, mode 0 is stable,
while forcing mode 2 introduces CRC errors especially during bursts.
Drop the requirement on spi-cpol for SJA1110.
Fixes: af2eab1a8243 ("dt-bindings: net: nxp,sja1105: document spi-cpol/cpha")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260409-imx8dxl-sr-som-v2-1-83ff20629ba0@solid-run.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the rockchip,rk3399-gru-sound.txt DT binding to DT Schema
format.
Update rockchip,cpu from a single I2S controller phandle to a
phandle-array. Add an optional second entry for the SPDIF controller,
as seen in rk3399-gru.dtsi, required by boards with DisplayPort audio.
Signed-off-by: Anushka Badhe <anushkabadhe@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260410055532.60868-1-anushkabadhe@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Final updates, notably:
- crypto: move Michael MIC code into wireless (only)
- mac80211:
- multi-link 4-addr support
- NAN data support (but no drivers yet)
- ath10k: DT quirk to make it work on some devices
- ath12k: IPQ5424 support
- rtw89: USB improvements for performance
* tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (124 commits)
wifi: cfg80211: Explicitly include <linux/export.h> in michael-mic.c
wifi: ath10k: Add device-tree quirk to skip host cap QMI requests
dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
crypto: Remove michael_mic from crypto_shash API
wifi: ipw2x00: Use michael_mic() from cfg80211
wifi: ath12k: Use michael_mic() from cfg80211
wifi: ath11k: Use michael_mic() from cfg80211
wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211
wifi: ipw2x00: Rename michael_mic() to libipw_michael_mic()
wifi: libertas_tf: refactor endpoint lookup
wifi: libertas: refactor endpoint lookup
wifi: at76c50x: refactor endpoint lookup
wifi: ath12k: Enable IPQ5424 WiFi device support
wifi: ath12k: Add CE remap hardware parameters for IPQ5424
wifi: ath12k: add ath12k_hw_regs for IPQ5424
wifi: ath12k: add ath12k_hw_version_map entry for IPQ5424
wifi: ath12k: Add ath12k_hw_params for IPQ5424
dt-bindings: net: wireless: add ath12k wifi device IPQ5424
wifi: ath10k: fix station lookup failure during disconnect
wifi: ath12k: Create symlink for each radio in a wiphy
...
====================
Link: https://patch.msgid.link/20260410064703.735099-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The J722S CPSW3G is mostly identical to the AM64's, but additionally
supports SGMII. The AM64 compatible ti,am642-cpsw-nuss is used as a
fallback.
Signed-off-by: Nora Schiffer <nora.schiffer@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/191e9f7e3a6c14eabe891a98c5fb646766479c0a.1775558273.git.nora.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ref-sync-sources phandle-array property to the dpll-pin schema
allowing board designers to declare which input pins can serve as
sync sources in a Reference-Sync pair. A Ref-Sync pair consists of
a clock reference and a low-frequency sync signal where the DPLL locks
to the clock but phase-aligns to the sync reference.
Update both examples in the Microchip ZL3073x binding to demonstrate
the new property with a 1 PPS sync source paired to a clock source.
Reviewed-by: Petr Oros <poros@redhat.com>
Reviewed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260408102716.443099-5-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add documentation for the device tree binding of the XDP720 eFuse.
Signed-off-by: Ashish Yadav <ashish.yadav@infineon.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20260410070154.3313-2-Ashish.Yadav@infineon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add devicetree schema for Microchip MCP998X/33 and MCP998XD/33D
Multichannel Automotive Temperature Monitor Family.
Signed-off-by: Victor Duicu <victor.duicu@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260403-add-mcp9982-hwmon-v12-1-b3bfb26ff136@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add the compatible string for the sony,aps-379. This is a simple PMBus
(I2C) device that requires no additional attributes.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260410012414.2818829-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge updates of assorted thermal drivers for 7.1-rc1 from Daniel
Lezcano:
"- Added an OF node address to output message to make sensor names more
distinguishable (Alexander Stein)
- Added hwmon support for the i.MX97 thermal sensor (Alexander Stein)
- Clamped correctly the results when doing value/temperature conversion
in the Spreadtrum driver (Thorsten Blum)
- Added the SDM670 compatible DT bindings for the Tsens and the lMH
drivers (Richard Acayan)
- Added the SM8750 compatible DT bindings for the Tsens (Manaf
Meethalavalappu Pallikunhi)
- Added the Eliza SoC compatible DT bindings for the Tsens (Krzysztof
Kozlowski)
- Fixed inverted condition check on error in the Spear driver (Gopi
Krishna Menon)
- Converted the DT bindings documentation into DT schema (Gopi Krishna
Menon)
- Used max() macro to increase readibility in the Broadcom STB thermal
sensor (Thorsten Blum)
- Removed stale @trim_offset kernel-doc entry (John Madieu)"
* tag 'thermal-v7.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal: renesas: rzg3e: Remove stale @trim_offset kernel-doc entry
thermal/drivers/brcmstb_thermal: Use max to simplify brcmstb_get_temp
dt-bindings: thermal: st,thermal-spear1340: convert to dtschema
thermal/drivers/spear: Fix error condition for reading st,thermal-flags
dt-bindings: thermal: qcom-tsens: Add Eliza SoC TSENS
dt-bindings: thermal: qcom-tsens: Document the SM8750 Temperature Sensor
thermal/drivers/sprd: Use min instead of clamp in sprd_thm_temp_to_rawdata
dt-bindings: thermal: lmh: Add SDM670 compatible
dt-bindings: thermal: tsens: add SDM670 compatible
thermal/drivers/sprd: Fix raw temperature clamping in sprd_thm_rawdata_to_temp
thermal/drivers/sprd: Fix temperature clamping in sprd_thm_temp_to_rawdata
thermal/drivers/imx91: Add hwmon support
thermal/of: Add OF node address to output message
|
|
Merge cpufreq updates for 7.1-rc1:
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Update cpufreq-dt-platdev blocklist (Faruque Ansari)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic EPP,
Raw EPP, and new unit tests for them to amd-pstate (Gautham Shenoy,
Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate which
leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add a
boost_freq_req QoS request to save the boost constraint instead of
overwriting the last scaling_max_freq constraint (Pierre Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is written
to its status sysfs attribute while the driver is already off (Fabio
De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
* pm-cpufreq: (38 commits)
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
amd-pstate-ut: Add module parameter to select testcases
amd-pstate: Introduce a tracepoint trace_amd_pstate_cppc_req2()
amd-pstate: Add sysfs support for floor_freq and floor_count
amd-pstate: Add support for CPPC_REQ2 and FLOOR_PERF
x86/cpufeatures: Add AMD CPPC Performance Priority feature.
...
|
|
Document support for spread spectrum clocking (SSC) on RTL8211F(D)(I)-CG,
RTL8211FS(I)(-VS)-CG, RTL8211FG(I)(-VS)-CG PHYs. Introduce DT properties
'realtek,clkout-ssc-enable', 'realtek,rxc-ssc-enable' and
'realtek,sysclk-ssc-enable' which control CLKOUT, RXC and SYSCLK
SSC spread spectrum clocking enablement on these signals. These
clock are not exposed via the clock API, therefore assigned-clock-sscs
property does not apply.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20260405233008.148974-2-marek.vasut@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sort the documented properties alphabetically, no functional change.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Link: https://patch.msgid.link/20260405233008.148974-1-marek.vasut@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc8).
Conflicts:
net/ipv6/seg6_iptunnel.c
c3812651b522f ("seg6: separate dst_cache for input and output paths in seg6 lwtunnel")
78723a62b969a ("seg6: add per-route tunnel source address")
https://lore.kernel.org/adZhwtOYfo-0ImSa@sirena.org.uk
net/ipv4/icmp.c
fde29fd934932 ("ipv4: icmp: fix null-ptr-deref in icmp_build_probe()")
d98adfbdd5c01 ("ipv4: drop ipv6_stub usage and use direct function calls")
https://lore.kernel.org/adO3dccqnr6j-BL9@sirena.org.uk
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/chain_mode.c
51f4e090b9f8 ("net: stmmac: fix integer underflow in chain mode")
6b4286e05508 ("net: stmmac: rename STMMAC_GET_ENTRY() -> STMMAC_NEXT_ENTRY()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Johan Hovold <johan@kernel.org> says:
These drivers reuse the OF node of their parent multi-function device
but fail to take another reference to balance the one dropped by the
platform bus code when unbinding the MFD and deregistering the child
devices.
Fix this by using the intended helper for reusing OF nodes.
Note that the first two patches will cause a trivial conflict with Doug's
series adding accessor functions for struct device flags which has now been
merged to the driver-core tree:
https://lore.kernel.org/r/20260406232444.3117516-1-dianders@chromium.org
Link: https://patch.msgid.link/20260408073055.5183-1-johan@kernel.org
|
|
Charles Keepax <ckeepax@opensource.cirrus.com> says:
Another round of SDCA fixes a couple of fix to the IRQ cleanup
from Richard, and a minor tweak to the IRQ handling from me.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Still a bit higher amount than wished, but nothing looks really scary,
and all changes are about nice and smooth device-specific fixes.
- HD-audio quirks, one revert for a regression and another oneliner
- AMD ACP quirks
- Fixes for SDCA interrupt handling
- A few Intel SOF, avs and NVL fixes
- Fixes for TAS2552 DT, NAU8325, and STM32"
* tag 'sound-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: amd: acp: update DMI quirk and add ACP DMIC for Lenovo platforms
ASoC: SDCA: Unregister IRQ handlers on module remove
ASoC: SDCA: mask Function_Status value
ASoC: SDCA: Fix overwritten var within for loop
ASoC: stm32_sai: fix incorrect BCLK polarity for DSP_A/B, LEFT_J
ASoC: SOF: Intel: hda: modify period size constraints for ACE4
ALSA: hda/intel: enforce stricter period-size alignment for Intel NVL
ASoC: nau8325: Add software reset during probe
Revert "ALSA: hda/realtek: Add quirk for Gigabyte Technology to fix headphone"
ASoC: Intel: avs: Fix memory leak in avs_register_i2s_test_boards()
ASoC: SOF: Intel: fix iteration in is_endpoint_present()
ASoC: SOF: Intel: Fix endpoint index if endpoints are missing
ASoC: SDCA: Fix errors in IRQ cleanup
ASoC: amd: acp: add Lenovo P16s G5 AMD quirk for legacy SDW machine
ASoC: dt-bindings: ti,tas2552: Add sound-dai-cells
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14IAH10
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, IPsec and wireless. This is again
considerably bigger than the old average. No known outstanding
regressions.
Current release - regressions:
- net: increase IP_TUNNEL_RECURSION_LIMIT to 5
- eth: ice: fix PTP timestamping broken by SyncE code on E825C
Current release - new code bugs:
- eth: stmmac: dwmac-motorcomm: fix eFUSE MAC address read failure
Previous releases - regressions:
- core: fix cross-cache free of KFENCE-allocated skb head
- sched: act_csum: validate nested VLAN headers
- rxrpc: fix call removal to use RCU safe deletion
- xfrm:
- wait for RCU readers during policy netns exit
- fix refcount leak in xfrm_migrate_policy_find
- wifi: rt2x00usb: fix devres lifetime
- mptcp: fix slab-use-after-free in __inet_lookup_established
- ipvs: fix NULL deref in ip_vs_add_service error path
- eth:
- airoha: fix memory leak in airoha_qdma_rx_process()
- lan966x: fix use-after-free and leak in lan966x_fdma_reload()
Previous releases - always broken:
- ipv6: ioam: fix potential NULL dereferences in __ioam6_fill_trace_data()
- ipv4: nexthop: avoid duplicate NHA_HW_STATS_ENABLE on nexthop group
dump
- bridge: guard local VLAN-0 FDB helpers against NULL vlan group
- xsk: tailroom reservation and MTU validation
- rxrpc:
- fix to request an ack if window is limited
- fix RESPONSE authenticator parser OOB read
- netfilter: nft_ct: fix use-after-free in timeout object destroy
- batman-adv: hold claim backbone gateways by reference
- eth:
- stmmac: fix PTP ref clock for Tegra234
- idpf: fix PREEMPT_RT raw/bh spinlock nesting for async VC handling
- ipa: fix GENERIC_CMD register field masks for IPA v5.0+"
* tag 'net-7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (104 commits)
net: lan966x: fix use-after-free and leak in lan966x_fdma_reload()
net: lan966x: fix page pool leak in error paths
net: lan966x: fix page_pool error handling in lan966x_fdma_rx_alloc_page_pool()
nfc: pn533: allocate rx skb before consuming bytes
l2tp: Drop large packets with UDP encap
net: ipa: fix event ring index not programmed for IPA v5.0+
net: ipa: fix GENERIC_CMD register field masks for IPA v5.0+
MAINTAINERS: Add Prashanth as additional maintainer for amd-xgbe driver
devlink: Fix incorrect skb socket family dumping
af_unix: read UNIX_DIAG_VFS data under unix_state_lock
Revert "mptcp: add needs_id for netlink appending addr"
mptcp: fix slab-use-after-free in __inet_lookup_established
net: txgbe: leave space for null terminators on property_entry
net: ioam6: fix OOB and missing lock
rxrpc: proc: size address buffers for %pISpc output
rxrpc: only handle RESPONSE during service challenge
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
rxrpc: Fix leak of rxgk context in rxgk_verify_response()
rxrpc: Fix integer overflow in rxgk_verify_response()
rxrpc: Fix missing error checks for rxkad encryption/decryption failure
...
|
|
'intel/vt-d', 'amd/amd-vi' and 'core' into next
|
|
Remove the cavium,thunder-8890 GPIO binding as there are no active
use cases. The binding is unused as the corresponding kernel driver
binds via PCI and not the compatible.
Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260408093313.17025-1-i.shihao.999@gmail.com
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
Tegra supports PCIe core clock monitoring for any rate changes that may be
happening because of the link speed changes. This is useful in tracking
any changes in the core clock that are not initiated by the software.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
Link: https://patch.msgid.link/20260324191000.1095768-7-mmaddireddy@nvidia.com
|
|
Convert the Hisilicon hi6210 I2S controller hardware binding from
legacy plain text to modern YAML dt-schema format.
During the conversion, the order of the dma-names properties in the
example was corrected to "tx", "rx" to match the official property
description, resolving a contradiction in the original text binding.
Signed-off-by: Chaitanya Sabnis <chaitanya.msabnis@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260327092106.4233-1-chaitanya.msabnis@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some firmware versions do not support the host-capability QMI request.
Since this request occurs before firmware and board files are loaded,
the quirk cannot be expressed in the firmware itself and must be described
in the device tree.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260407-skip-host-cam-qmi-req-v5-1-dfa8a05c6538@ixit.cz
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
Biju <biju.das.au@gmail.com> says:
This patch series adds binding and driver support for RSPI IP found on the
RZ/G3L SoC. The RSPI is compatible with RZ/V2H RSPI, but has 2 clocks
compared to 3 on RZ/V2H.
Link: https://patch.msgid.link/20260408085418.18770-1-biju.das.jz@bp.renesas.com
|
|
Document RSPI IP found on the RZ/G3L SoC. The RSPI IP is compatible with
the RZ/V2H RSPI IP, but has 2 clocks compared to 3 on RZ/V2H.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260408085418.18770-2-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
