diff options
Diffstat (limited to 'include/linux')
53 files changed, 1064 insertions, 445 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild index c94e71781b79..a25555381097 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -238,6 +238,7 @@ header-y += magic.h header-y += major.h header-y += map_to_7segment.h header-y += matroxfb.h +header-y += mdio.h header-y += media.h header-y += mempolicy.h header-y += meye.h @@ -304,6 +305,7 @@ header-y += poll.h header-y += posix_types.h header-y += ppdev.h header-y += ppp-comp.h +header-y += ppp-ioctl.h header-y += ppp_defs.h header-y += pps.h header-y += prctl.h diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 83c209f39493..5af9a075498f 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -136,6 +136,7 @@ struct bcma_device { bool dev_registered; u8 core_index; + u8 core_unit; u32 addr; u32 wrap; @@ -175,6 +176,12 @@ int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); extern void bcma_driver_unregister(struct bcma_driver *drv); +/* Set a fallback SPROM. + * See kdoc at the function definition for complete documentation. */ +extern int bcma_arch_register_fallback_sprom( + int (*sprom_callback)(struct bcma_bus *bus, + struct ssb_sprom *out)); + struct bcma_bus { /* The MMIO area. */ void __iomem *mmio; @@ -195,6 +202,7 @@ struct bcma_bus { struct list_head cores; u8 nr_cores; u8 init_done:1; + u8 num; struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; @@ -282,6 +290,7 @@ static inline void bcma_maskset16(struct bcma_device *cc, bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set); } +extern struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid); extern bool bcma_core_is_enabled(struct bcma_device *core); extern void bcma_core_disable(struct bcma_device *core, u32 flags); extern int bcma_core_enable(struct bcma_device *core, u32 flags); diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index a33086a7530b..8bbfe31fbac8 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -56,6 +56,9 @@ #define BCMA_CC_OTPS_HW_PROTECT 0x00000001 #define BCMA_CC_OTPS_SW_PROTECT 0x00000002 #define BCMA_CC_OTPS_CID_PROTECT 0x00000004 +#define BCMA_CC_OTPS_GU_PROG_IND 0x00000F00 /* General Use programmed indication */ +#define BCMA_CC_OTPS_GU_PROG_IND_SHIFT 8 +#define BCMA_CC_OTPS_GU_PROG_HW 0x00000100 /* HW region programmed */ #define BCMA_CC_OTPC 0x0014 /* OTP control */ #define BCMA_CC_OTPC_RECWAIT 0xFF000000 #define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 @@ -72,6 +75,8 @@ #define BCMA_CC_OTPP_READ 0x40000000 #define BCMA_CC_OTPP_START 0x80000000 #define BCMA_CC_OTPP_BUSY 0x80000000 +#define BCMA_CC_OTPL 0x001C /* OTP layout */ +#define BCMA_CC_OTPL_GURGN_OFFSET 0x00000FFF /* offset of general use region */ #define BCMA_CC_IRQSTAT 0x0020 #define BCMA_CC_IRQMASK 0x0024 #define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ @@ -79,6 +84,10 @@ #define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ #define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ #define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ +#define BCMA_CC_CHIPST_4313_SPROM_PRESENT 1 +#define BCMA_CC_CHIPST_4313_OTP_PRESENT 2 +#define BCMA_CC_CHIPST_4331_SPROM_PRESENT 2 +#define BCMA_CC_CHIPST_4331_OTP_PRESENT 4 #define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ #define BCMA_CC_JCMD_START 0x80000000 #define BCMA_CC_JCMD_BUSY 0x80000000 @@ -181,6 +190,22 @@ #define BCMA_CC_FLASH_CFG 0x0128 #define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ #define BCMA_CC_FLASH_WAITCNT 0x012C +#define BCMA_CC_SROM_CONTROL 0x0190 +#define BCMA_CC_SROM_CONTROL_START 0x80000000 +#define BCMA_CC_SROM_CONTROL_BUSY 0x80000000 +#define BCMA_CC_SROM_CONTROL_OPCODE 0x60000000 +#define BCMA_CC_SROM_CONTROL_OP_READ 0x00000000 +#define BCMA_CC_SROM_CONTROL_OP_WRITE 0x20000000 +#define BCMA_CC_SROM_CONTROL_OP_WRDIS 0x40000000 +#define BCMA_CC_SROM_CONTROL_OP_WREN 0x60000000 +#define BCMA_CC_SROM_CONTROL_OTPSEL 0x00000010 +#define BCMA_CC_SROM_CONTROL_LOCK 0x00000008 +#define BCMA_CC_SROM_CONTROL_SIZE_MASK 0x00000006 +#define BCMA_CC_SROM_CONTROL_SIZE_1K 0x00000000 +#define BCMA_CC_SROM_CONTROL_SIZE_4K 0x00000002 +#define BCMA_CC_SROM_CONTROL_SIZE_16K 0x00000004 +#define BCMA_CC_SROM_CONTROL_SIZE_SHIFT 1 +#define BCMA_CC_SROM_CONTROL_PRESENT 0x00000001 /* 0x1E0 is defined as shared BCMA_CLKCTLST */ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ #define BCMA_CC_UART0_DATA 0x0300 @@ -240,7 +265,6 @@ #define BCMA_CC_PLLCTL_ADDR 0x0660 #define BCMA_CC_PLLCTL_DATA 0x0664 #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ -#define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ /* Divider allocation in 4716/47162/5356 */ #define BCMA_CC_PMU5_MAINPLL_CPU 1 diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h index 3871b668caf9..46c71e27d31f 100644 --- a/include/linux/bcma/bcma_driver_pci.h +++ b/include/linux/bcma/bcma_driver_pci.h @@ -53,6 +53,35 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 #define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ #define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 +#define BCMA_CORE_PCI_CONFIG_ADDR 0x0120 /* pcie config space access */ +#define BCMA_CORE_PCI_CONFIG_DATA 0x0124 /* pcie config space access */ +#define BCMA_CORE_PCI_MDIO_CONTROL 0x0128 /* controls the mdio access */ +#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_MASK 0x7f /* clock to be used on MDIO */ +#define BCMA_CORE_PCI_MDIOCTL_DIVISOR_VAL 0x2 +#define BCMA_CORE_PCI_MDIOCTL_PREAM_EN 0x80 /* Enable preamble sequnce */ +#define BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE 0x100 /* Tranaction complete */ +#define BCMA_CORE_PCI_MDIO_DATA 0x012c /* Data to the mdio access */ +#define BCMA_CORE_PCI_MDIODATA_MASK 0x0000ffff /* data 2 bytes */ +#define BCMA_CORE_PCI_MDIODATA_TA 0x00020000 /* Turnaround */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF_OLD 18 /* Regaddr shift (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK_OLD 0x003c0000 /* Regaddr Mask (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF_OLD 22 /* Physmedia devaddr shift (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK_OLD 0x0fc00000 /* Physmedia devaddr Mask (rev < 10) */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_SHF 18 /* Regaddr shift */ +#define BCMA_CORE_PCI_MDIODATA_REGADDR_MASK 0x007c0000 /* Regaddr Mask */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_SHF 23 /* Physmedia devaddr shift */ +#define BCMA_CORE_PCI_MDIODATA_DEVADDR_MASK 0x0f800000 /* Physmedia devaddr Mask */ +#define BCMA_CORE_PCI_MDIODATA_WRITE 0x10000000 /* write Transaction */ +#define BCMA_CORE_PCI_MDIODATA_READ 0x20000000 /* Read Transaction */ +#define BCMA_CORE_PCI_MDIODATA_START 0x40000000 /* start of Transaction */ +#define BCMA_CORE_PCI_MDIODATA_DEV_ADDR 0x0 /* dev address for serdes */ +#define BCMA_CORE_PCI_MDIODATA_BLK_ADDR 0x1F /* blk address for serdes */ +#define BCMA_CORE_PCI_MDIODATA_DEV_PLL 0x1d /* SERDES PLL Dev */ +#define BCMA_CORE_PCI_MDIODATA_DEV_TX 0x1e /* SERDES TX Dev */ +#define BCMA_CORE_PCI_MDIODATA_DEV_RX 0x1f /* SERDES RX Dev */ +#define BCMA_CORE_PCI_PCIEIND_ADDR 0x0130 /* indirect access to the internal register */ +#define BCMA_CORE_PCI_PCIEIND_DATA 0x0134 /* Data to/from the internal regsiter */ +#define BCMA_CORE_PCI_CLKREQENCTRL 0x0138 /* >= rev 6, Clkreq rdma control */ #define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ #define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ @@ -72,20 +101,114 @@ struct pci_dev; #define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ #define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ +/* PCIE protocol PHY diagnostic registers */ +#define BCMA_CORE_PCI_PLP_MODEREG 0x200 /* Mode */ +#define BCMA_CORE_PCI_PLP_STATUSREG 0x204 /* Status */ +#define BCMA_CORE_PCI_PLP_POLARITYINV_STAT 0x10 /* Status reg PCIE_PLP_STATUSREG */ +#define BCMA_CORE_PCI_PLP_LTSSMCTRLREG 0x208 /* LTSSM control */ +#define BCMA_CORE_PCI_PLP_LTLINKNUMREG 0x20c /* Link Training Link number */ +#define BCMA_CORE_PCI_PLP_LTLANENUMREG 0x210 /* Link Training Lane number */ +#define BCMA_CORE_PCI_PLP_LTNFTSREG 0x214 /* Link Training N_FTS */ +#define BCMA_CORE_PCI_PLP_ATTNREG 0x218 /* Attention */ +#define BCMA_CORE_PCI_PLP_ATTNMASKREG 0x21C /* Attention Mask */ +#define BCMA_CORE_PCI_PLP_RXERRCTR 0x220 /* Rx Error */ +#define BCMA_CORE_PCI_PLP_RXFRMERRCTR 0x224 /* Rx Framing Error */ +#define BCMA_CORE_PCI_PLP_RXERRTHRESHREG 0x228 /* Rx Error threshold */ +#define BCMA_CORE_PCI_PLP_TESTCTRLREG 0x22C /* Test Control reg */ +#define BCMA_CORE_PCI_PLP_SERDESCTRLOVRDREG 0x230 /* SERDES Control Override */ +#define BCMA_CORE_PCI_PLP_TIMINGOVRDREG 0x234 /* Timing param override */ +#define BCMA_CORE_PCI_PLP_RXTXSMDIAGREG 0x238 /* RXTX State Machine Diag */ +#define BCMA_CORE_PCI_PLP_LTSSMDIAGREG 0x23C /* LTSSM State Machine Diag */ + +/* PCIE protocol DLLP diagnostic registers */ +#define BCMA_CORE_PCI_DLLP_LCREG 0x100 /* Link Control */ +#define BCMA_CORE_PCI_DLLP_LSREG 0x104 /* Link Status */ +#define BCMA_CORE_PCI_DLLP_LAREG 0x108 /* Link Attention */ +#define BCMA_CORE_PCI_DLLP_LSREG_LINKUP (1 << 16) +#define BCMA_CORE_PCI_DLLP_LAMASKREG 0x10C /* Link Attention Mask */ +#define BCMA_CORE_PCI_DLLP_NEXTTXSEQNUMREG 0x110 /* Next Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_ACKEDTXSEQNUMREG 0x114 /* Acked Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_PURGEDTXSEQNUMREG 0x118 /* Purged Tx Seq Num */ +#define BCMA_CORE_PCI_DLLP_RXSEQNUMREG 0x11C /* Rx Sequence Number */ +#define BCMA_CORE_PCI_DLLP_LRREG 0x120 /* Link Replay */ +#define BCMA_CORE_PCI_DLLP_LACKTOREG 0x124 /* Link Ack Timeout */ +#define BCMA_CORE_PCI_DLLP_PMTHRESHREG 0x128 /* Power Management Threshold */ +#define BCMA_CORE_PCI_DLLP_RTRYWPREG 0x12C /* Retry buffer write ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYRPREG 0x130 /* Retry buffer Read ptr */ +#define BCMA_CORE_PCI_DLLP_RTRYPPREG 0x134 /* Retry buffer Purged ptr */ +#define BCMA_CORE_PCI_DLLP_RTRRWREG 0x138 /* Retry buffer Read/Write */ +#define BCMA_CORE_PCI_DLLP_ECTHRESHREG 0x13C /* Error Count Threshold */ +#define BCMA_CORE_PCI_DLLP_TLPERRCTRREG 0x140 /* TLP Error Counter */ +#define BCMA_CORE_PCI_DLLP_ERRCTRREG 0x144 /* Error Counter */ +#define BCMA_CORE_PCI_DLLP_NAKRXCTRREG 0x148 /* NAK Received Counter */ +#define BCMA_CORE_PCI_DLLP_TESTREG 0x14C /* Test */ +#define BCMA_CORE_PCI_DLLP_PKTBIST 0x150 /* Packet BIST */ +#define BCMA_CORE_PCI_DLLP_PCIE11 0x154 /* DLLP PCIE 1.1 reg */ + +/* SERDES RX registers */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL 1 /* Rx cntrl */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL_FORCE 0x80 /* rxpolarity_force */ +#define BCMA_CORE_PCI_SERDES_RX_CTRL_POLARITY 0x40 /* rxpolarity_value */ +#define BCMA_CORE_PCI_SERDES_RX_TIMER1 2 /* Rx Timer1 */ +#define BCMA_CORE_PCI_SERDES_RX_CDR 6 /* CDR */ +#define BCMA_CORE_PCI_SERDES_RX_CDRBW 7 /* CDR BW */ + +/* SERDES PLL registers */ +#define BCMA_CORE_PCI_SERDES_PLL_CTRL 1 /* PLL control reg */ +#define BCMA_CORE_PCI_PLL_CTRL_FREQDET_EN 0x4000 /* bit 14 is FREQDET on */ + /* PCIcore specific boardflags */ #define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ +/* PCIE Config space accessing MACROS */ +#define BCMA_CORE_PCI_CFG_BUS_SHIFT 24 /* Bus shift */ +#define BCMA_CORE_PCI_CFG_SLOT_SHIFT 19 /* Slot/Device shift */ +#define BCMA_CORE_PCI_CFG_FUN_SHIFT 16 /* Function shift */ +#define BCMA_CORE_PCI_CFG_OFF_SHIFT 0 /* Register shift */ + +#define BCMA_CORE_PCI_CFG_BUS_MASK 0xff /* Bus mask */ +#define BCMA_CORE_PCI_CFG_SLOT_MASK 0x1f /* Slot/Device mask */ +#define BCMA_CORE_PCI_CFG_FUN_MASK 7 /* Function mask */ +#define BCMA_CORE_PCI_CFG_OFF_MASK 0xfff /* Register mask */ + +/* PCIE Root Capability Register bits (Host mode only) */ +#define BCMA_CORE_PCI_RC_CRS_VISIBILITY 0x0001 + +struct bcma_drv_pci; + +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE +struct bcma_drv_pci_host { + struct bcma_drv_pci *pdev; + + u32 host_cfg_addr; + spinlock_t cfgspace_lock; + + struct pci_controller pci_controller; + struct pci_ops pci_ops; + struct resource mem_resource; + struct resource io_resource; +}; +#endif + struct bcma_drv_pci { struct bcma_device *core; u8 setup_done:1; + u8 hostmode:1; + +#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE + struct bcma_drv_pci_host *host_controller; +#endif }; /* Register access */ #define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) #define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) -extern void bcma_core_pci_init(struct bcma_drv_pci *pc); +extern void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc); extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core, bool enable); +extern int bcma_core_pci_pcibios_map_irq(const struct pci_dev *dev); +extern int bcma_core_pci_plat_dev_init(struct pci_dev *dev); + #endif /* LINUX_BCMA_DRIVER_PCI_H_ */ diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h index 9faae2ae02e8..5a71d5719640 100644 --- a/include/linux/bcma/bcma_regs.h +++ b/include/linux/bcma/bcma_regs.h @@ -56,4 +56,31 @@ #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ +/* SiliconBackplane Address Map. + * All regions may not exist on all chips. + */ +#define BCMA_SOC_SDRAM_BASE 0x00000000U /* Physical SDRAM */ +#define BCMA_SOC_PCI_MEM 0x08000000U /* Host Mode sb2pcitranslation0 (64 MB) */ +#define BCMA_SOC_PCI_MEM_SZ (64 * 1024 * 1024) +#define BCMA_SOC_PCI_CFG 0x0c000000U /* Host Mode sb2pcitranslation1 (64 MB) */ +#define BCMA_SOC_SDRAM_SWAPPED 0x10000000U /* Byteswapped Physical SDRAM */ +#define BCMA_SOC_SDRAM_R2 0x80000000U /* Region 2 for sdram (512 MB) */ + + +#define BCMA_SOC_PCI_DMA 0x40000000U /* Client Mode sb2pcitranslation2 (1 GB) */ +#define BCMA_SOC_PCI_DMA2 0x80000000U /* Client Mode sb2pcitranslation2 (1 GB) */ +#define BCMA_SOC_PCI_DMA_SZ 0x40000000U /* Client Mode sb2pcitranslation2 size in bytes */ +#define BCMA_SOC_PCIE_DMA_L32 0x00000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), low 32 bits + */ +#define BCMA_SOC_PCIE_DMA_H32 0x80000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), high 32 bits + */ + +#define BCMA_SOC_PCI1_MEM 0x40000000U /* Host Mode sb2pcitranslation0 (64 MB) */ +#define BCMA_SOC_PCI1_CFG 0x44000000U /* Host Mode sb2pcitranslation1 (64 MB) */ +#define BCMA_SOC_PCIE1_DMA_H32 0xc0000000U /* PCIE Client Mode sb2pcitranslation2 + * (2 ZettaBytes), high 32 bits + */ + #endif /* LINUX_BCMA_REGS_H_ */ diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h index a0969fcb72b9..5d2efe7e3f1b 100644 --- a/include/linux/can/dev.h +++ b/include/linux/can/dev.h @@ -92,7 +92,7 @@ void can_bus_off(struct net_device *dev); void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, unsigned int idx); -void can_get_echo_skb(struct net_device *dev, unsigned int idx); +unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx); void can_free_echo_skb(struct net_device *dev, unsigned int idx); struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf); diff --git a/include/linux/dccp.h b/include/linux/dccp.h index 710c04302a15..eaf95a023af4 100644 --- a/include/linux/dccp.h +++ b/include/linux/dccp.h @@ -376,8 +376,10 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) /** * struct dccp_request_sock - represent DCCP-specific connection request * @dreq_inet_rsk: structure inherited from - * @dreq_iss: initial sequence number sent on the Response (RFC 4340, 7.1) - * @dreq_isr: initial sequence number received on the Request + * @dreq_iss: initial sequence number, sent on the first Response (RFC 4340, 7.1) + * @dreq_gss: greatest sequence number sent (for retransmitted Responses) + * @dreq_isr: initial sequence number received in the first Request + * @dreq_gsr: greatest sequence number received (for retransmitted Request(s)) * @dreq_service: service code present on the Request (there is just one) * @dreq_featneg: feature negotiation options for this connection * The following two fields are analogous to the ones in dccp_sock: @@ -387,7 +389,9 @@ static inline unsigned int dccp_hdr_len(const struct sk_buff *skb) struct dccp_request_sock { struct inet_request_sock dreq_inet_rsk; __u64 dreq_iss; + __u64 dreq_gss; __u64 dreq_isr; + __u64 dreq_gsr; __be32 dreq_service; struct list_head dreq_featneg; __u32 dreq_timestamp_echo; diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index 05955cf09937..8a1835855faa 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -140,17 +140,18 @@ static inline void random_ether_addr(u8 *addr) } /** - * dev_hw_addr_random - Create random MAC and set device flag + * eth_hw_addr_random - Generate software assigned random Ethernet and + * set device flag * @dev: pointer to net_device structure - * @hwaddr: Pointer to a six-byte array containing the Ethernet address * - * Generate random MAC to be used by a device and set addr_assign_type - * so the state can be read by sysfs and be used by udev. + * Generate a random Ethernet address (MAC) to be used by a net device + * and set addr_assign_type so the state can be read by sysfs and be + * used by userspace. */ -static inline void dev_hw_addr_random(struct net_device *dev, u8 *hwaddr) +static inline void eth_hw_addr_random(struct net_device *dev) { dev->addr_assign_type |= NET_ADDR_RANDOM; - random_ether_addr(hwaddr); + random_ether_addr(dev->dev_addr); } /** diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index da5b2de99ae4..e1d9e0ede309 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -30,10 +30,15 @@ struct ethtool_cmd { * access it */ __u8 duplex; /* Duplex, half or full */ __u8 port; /* Which connector port */ - __u8 phy_address; + __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45). + * May be read-only or read-write + * depending on the driver. + */ __u8 transceiver; /* Which transceiver to use */ __u8 autoneg; /* Enable or disable autonegotiation */ - __u8 mdio_support; + __u8 mdio_support; /* MDIO protocols supported. Read-only. + * Not set by all drivers. + */ __u32 maxtxpkt; /* Tx pkts before generating tx int */ __u32 maxrxpkt; /* Rx pkts before generating rx int */ __u16 speed_hi; /* The forced speed (upper @@ -59,6 +64,20 @@ static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep) return (ep->speed_hi << 16) | ep->speed; } +/* Device supports clause 22 register access to PHY or peripherals + * using the interface defined in <linux/mii.h>. This should not be + * set if there are known to be no such peripherals present or if + * the driver only emulates clause 22 registers for compatibility. + */ +#define ETH_MDIO_SUPPORTS_C22 1 + +/* Device supports clause 45 register access to PHY or peripherals + * using the interface defined in <linux/mii.h> and <linux/mdio.h>. + * This should not be set if there are known to be no such peripherals + * present. + */ +#define ETH_MDIO_SUPPORTS_C45 2 + #define ETHTOOL_FWVERS_LEN 32 #define ETHTOOL_BUSINFO_LEN 32 /* these strings are set to whatever the driver author decides... */ diff --git a/include/linux/if.h b/include/linux/if.h index 06b6ef60c821..f995c663c493 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -80,6 +80,8 @@ * skbs on transmit */ #define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ #define IFF_TEAM_PORT 0x40000 /* device used as team port */ +#define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */ + #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 diff --git a/include/linux/if_ppp.h b/include/linux/if_ppp.h index c9ad38322576..9048fabb7a4e 100644 --- a/include/linux/if_ppp.h +++ b/include/linux/if_ppp.h @@ -1,173 +1 @@ -/* - * if_ppp.h - Point-to-Point Protocol definitions. - * - * Copyright (c) 1989 Carnegie Mellon University. - * All rights reserved. - * - * Redistribution and use in source and binary forms are permitted - * provided that the above copyright notice and this paragraph are - * duplicated in all such forms and that any documentation, - * advertising materials, and other materials related to such - * distribution and use acknowledge that the software was developed - * by Carnegie Mellon University. The name of the - * University may not be used to endorse or promote products derived - * from this software without specific prior written permission. - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR - * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED - * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. - * - */ - -/* - * ==FILEVERSION 20050812== - * - * NOTE TO MAINTAINERS: - * If you modify this file at all, please set the above date. - * if_ppp.h is shipped with a PPP distribution as well as with the kernel; - * if everyone increases the FILEVERSION number above, then scripts - * can do the right thing when deciding whether to install a new if_ppp.h - * file. Don't change the format of that line otherwise, so the - * installation script can recognize it. - */ - -#ifndef _IF_PPP_H_ -#define _IF_PPP_H_ - -#include <linux/types.h> -#include <linux/compiler.h> - -/* - * Packet sizes - */ - -#define PPP_MTU 1500 /* Default MTU (size of Info field) */ -#define PPP_MAXMRU 65000 /* Largest MRU we allow */ -#define PROTO_IPX 0x002b /* protocol numbers */ -#define PROTO_DNA_RT 0x0027 /* DNA Routing */ - - -/* - * Bit definitions for flags. - */ - -#define SC_COMP_PROT 0x00000001 /* protocol compression (output) */ -#define SC_COMP_AC 0x00000002 /* header compression (output) */ -#define SC_COMP_TCP 0x00000004 /* TCP (VJ) compression (output) */ -#define SC_NO_TCP_CCID 0x00000008 /* disable VJ connection-id comp. */ -#define SC_REJ_COMP_AC 0x00000010 /* reject adrs/ctrl comp. on input */ -#define SC_REJ_COMP_TCP 0x00000020 /* reject TCP (VJ) comp. on input */ -#define SC_CCP_OPEN 0x00000040 /* Look at CCP packets */ -#define SC_CCP_UP 0x00000080 /* May send/recv compressed packets */ -#define SC_ENABLE_IP 0x00000100 /* IP packets may be exchanged */ -#define SC_LOOP_TRAFFIC 0x00000200 /* send traffic to pppd */ -#define SC_MULTILINK 0x00000400 /* do multilink encapsulation */ -#define SC_MP_SHORTSEQ 0x00000800 /* use short MP sequence numbers */ -#define SC_COMP_RUN 0x00001000 /* compressor has been inited */ -#define SC_DECOMP_RUN 0x00002000 /* decompressor has been inited */ -#define SC_MP_XSHORTSEQ 0x00004000 /* transmit short MP seq numbers */ -#define SC_DEBUG 0x00010000 /* enable debug messages */ -#define SC_LOG_INPKT 0x00020000 /* log contents of good pkts recvd */ -#define SC_LOG_OUTPKT 0x00040000 /* log contents of pkts sent */ -#define SC_LOG_RAWIN 0x00080000 /* log all chars received */ -#define SC_LOG_FLUSH 0x00100000 /* log all chars flushed */ -#define SC_SYNC 0x00200000 /* synchronous serial mode */ -#define SC_MUST_COMP 0x00400000 /* no uncompressed packets may be sent or received */ -#define SC_MASK 0x0f600fff /* bits that user can change */ - -/* state bits */ -#define SC_XMIT_BUSY 0x10000000 /* (used by isdn_ppp?) */ -#define SC_RCV_ODDP 0x08000000 /* have rcvd char with odd parity */ -#define SC_RCV_EVNP 0x04000000 /* have rcvd char with even parity */ -#define SC_RCV_B7_1 0x02000000 /* have rcvd char with bit |