diff options
72 files changed, 3426 insertions, 1899 deletions
diff --git a/Documentation/driver-api/pci/p2pdma.rst b/Documentation/driver-api/pci/p2pdma.rst index d0b241628cf1..280673b50350 100644 --- a/Documentation/driver-api/pci/p2pdma.rst +++ b/Documentation/driver-api/pci/p2pdma.rst @@ -9,22 +9,48 @@ between two devices on the bus. This type of transaction is henceforth called Peer-to-Peer (or P2P). However, there are a number of issues that make P2P transactions tricky to do in a perfectly safe way. -One of the biggest issues is that PCI doesn't require forwarding -transactions between hierarchy domains, and in PCIe, each Root Port -defines a separate hierarchy domain. To make things worse, there is no -simple way to determine if a given Root Complex supports this or not. -(See PCIe r4.0, sec 1.3.1). Therefore, as of this writing, the kernel -only supports doing P2P when the endpoints involved are all behind the -same PCI bridge, as such devices are all in the same PCI hierarchy -domain, and the spec guarantees that all transactions within the -hierarchy will be routable, but it does not require routing -between hierarchies. - -The second issue is that to make use of existing interfaces in Linux, -memory that is used for P2P transactions needs to be backed by struct -pages. However, PCI BARs are not typically cache coherent so there are -a few corner case gotchas with these pages so developers need to -be careful about what they do with them. +For PCIe the routing of Transaction Layer Packets (TLPs) is well-defined up +until they reach a host bridge or root port. If the path includes PCIe switches +then based on the ACS settings the transaction can route entirely within +the PCIe hierarchy and never reach the root port. The kernel will evaluate +the PCIe topology and always permit P2P in these well-defined cases. + +However, if the P2P transaction reaches the host bridge then it might have to +hairpin back out the same root port, be routed inside the CPU SOC to another +PCIe root port, or routed internally to the SOC. + +The PCIe specification doesn't define the forwarding of transactions between +hierarchy domains and kernel defaults to blocking such routing. There is an +allow list to allow detecting known-good HW, in which case P2P between any +two PCIe devices will be permitted. + +Since P2P inherently is doing transactions between two devices it requires two +drivers to be co-operating inside the kernel. The providing driver has to convey +its MMIO to the consuming driver. To meet the driver model lifecycle rules the +MMIO must have all DMA mapping removed, all CPU accesses prevented, all page +table mappings undone before the providing driver completes remove(). + +This requires the providing and consuming driver to actively work together to +guarantee that the consuming driver has stopped using the MMIO during a removal +cycle. This is done by either a synchronous invalidation shutdown or waiting +for all usage refcounts to reach zero. + +At the lowest level the P2P subsystem offers a naked struct p2p_provider that +delegates lifecycle management to the providing driver. It is expected that +drivers using this option will wrap their MMIO memory in DMABUF and use DMABUF +to provide an invalidation shutdown. These MMIO addresess have no struct page, and +if used with mmap() must create special PTEs. As such there are very few +kernel uAPIs that can accept pointers to them; in particular they cannot be used +with read()/write(), including O_DIRECT. + +Building on this, the subsystem offers a layer to wrap the MMIO in a ZONE_DEVICE +pgmap of MEMORY_DEVICE_PCI_P2PDMA to create struct pages. The lifecycle of +pgmap ensures that when the pgmap is destroyed all other drivers have stopped +using the MMIO. This option works with O_DIRECT flows, in some cases, if the +underlying subsystem supports handling MEMORY_DEVICE_PCI_P2PDMA through +FOLL_PCI_P2PDMA. The use of FOLL_LONGTERM is prevented. As this relies on pgmap +it also relies on architecture support along with alignment and minimum size +limitations. Driver Writer's Guide @@ -114,14 +140,39 @@ allocating scatter-gather lists with P2P memory. Struct Page Caveats ------------------- -Driver writers should be very careful about not passing these special -struct pages to code that isn't prepared for it. At this time, the kernel -interfaces do not have any checks for ensuring this. This obviously -precludes passing these pages to userspace. +While the MEMORY_DEVICE_PCI_P2PDMA pages can be installed in VMAs, +pin_user_pages() and related will not return them unless FOLL_PCI_P2PDMA is set. -P2P memory is also technically IO memory but should never have any side -effects behind it. Thus, the order of loads and stores should not be important -and ioreadX(), iowriteX() and friends should not be necessary. +The MEMORY_DEVICE_PCI_P2PDMA pages require care to support in the kernel. The +KVA is still MMIO and must still be accessed through the normal +readX()/writeX()/etc helpers. Direct CPU access (e.g. memcpy) is forbidden, just +like any other MMIO mapping. While this will actually work on some +architectures, others will experience corruption or just crash in the kernel. +Supporting FOLL_PCI_P2PDMA in a subsystem requires scrubbing it to ensure no CPU +access happens. + + +Usage With DMABUF +================= + +DMABUF provides an alternative to the above struct page-based +client/provider/orchestrator system and should be used when struct page +doesn't exist. In this mode the exporting driver will wrap +some of its MMIO in a DMABUF and give the DMABUF FD to userspace. + +Userspace can then pass the FD to an importing driver which will ask the +exporting driver to map it to the importer. + +In this case the initiator and target pci_devices are known and the P2P subsystem +is used to determine the mapping type. The phys_addr_t-based DMA API is used to +establish the dma_addr_t. + +Lifecycle is controlled by DMABUF move_notify(). When the exporting driver wants +to remove() it must deliver an invalidation shutdown to all DMABUF importing +drivers through move_notify() and synchronously DMA unmap all the MMIO. + +No importing driver can continue to have a DMA map to the MMIO after the +exporting driver has destroyed its p2p_provider. P2P DMA Support Library diff --git a/block/blk-mq-dma.c b/block/blk-mq-dma.c index e9108ccaf4b0..b6dbc9767596 100644 --- a/block/blk-mq-dma.c +++ b/block/blk-mq-dma.c @@ -84,7 +84,7 @@ static inline bool blk_can_dma_map_iova(struct request *req, static bool blk_dma_map_bus(struct blk_dma_iter *iter, struct phys_vec *vec) { - iter->addr = pci_p2pdma_bus_addr_map(&iter->p2pdma, vec->paddr); + iter->addr = pci_p2pdma_bus_addr_map(iter->p2pdma.mem, vec->paddr); iter->len = vec->len; return true; } diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c index be25ecbdba69..f8bfff5dd0bd 100644 --- a/drivers/crypto/hisilicon/qm.c +++ b/drivers/crypto/hisilicon/qm.c @@ -3032,11 +3032,36 @@ static void qm_put_pci_res(struct hisi_qm *qm) pci_release_mem_regions(pdev); } +static void hisi_mig_region_clear(struct hisi_qm *qm) +{ + u32 val; + + /* Clear migration region set of PF */ + if (qm->fun_type == QM_HW_PF && qm->ver > QM_HW_V3) { + val = readl(qm->io_base + QM_MIG_REGION_SEL); + val &= ~QM_MIG_REGION_EN; + writel(val, qm->io_base + QM_MIG_REGION_SEL); + } +} + +static void hisi_mig_region_enable(struct hisi_qm *qm) +{ + u32 val; + + /* Select migration region of PF */ + if (qm->fun_type == QM_HW_PF && qm->ver > QM_HW_V3) { + val = readl(qm->io_base + QM_MIG_REGION_SEL); + val |= QM_MIG_REGION_EN; + writel(val, qm->io_base + QM_MIG_REGION_SEL); + } +} + static void hisi_qm_pci_uninit(struct hisi_qm *qm) { struct pci_dev *pdev = qm->pdev; pci_free_irq_vectors(pdev); + hisi_mig_region_clear(qm); qm_put_pci_res(qm); pci_disable_device(pdev); } @@ -5752,6 +5777,7 @@ int hisi_qm_init(struct hisi_qm *qm) goto err_free_qm_memory; qm_cmd_init(qm); + hisi_mig_region_enable(qm); return 0; @@ -5890,6 +5916,7 @@ static int qm_rebuild_for_resume(struct hisi_qm *qm) } qm_cmd_init(qm); + hisi_mig_region_enable(qm); hisi_qm_dev_err_init(qm); /* Set the doorbell timeout to QM_DB_TIMEOUT_CFG ns. */ writel(QM_DB_TIMEOUT_SET, qm->io_base + QM_DB_TIMEOUT_CFG); diff --git a/drivers/dma-buf/Makefile b/drivers/dma-buf/Makefile index 70ec901edf2c..2008fb7481b3 100644 --- a/drivers/dma-buf/Makefile +++ b/drivers/dma-buf/Makefile @@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only obj-y := dma-buf.o dma-fence.o dma-fence-array.o dma-fence-chain.o \ - dma-fence-unwrap.o dma-resv.o + dma-fence-unwrap.o dma-resv.o dma-buf-mapping.o obj-$(CONFIG_DMABUF_HEAPS) += dma-heap.o obj-$(CONFIG_DMABUF_HEAPS) += heaps/ obj-$(CONFIG_SYNC_FILE) += sync_file.o diff --git a/drivers/dma-buf/dma-buf-mapping.c b/drivers/dma-buf/dma-buf-mapping.c new file mode 100644 index 000000000000..b7352e609fbd --- /dev/null +++ b/drivers/dma-buf/dma-buf-mapping.c @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * DMA BUF Mapping Helpers + * + */ +#include <linux/dma-buf-mapping.h> +#include <linux/dma-resv.h> + +static struct scatterlist *fill_sg_entry(struct scatterlist *sgl, size_t length, + dma_addr_t addr) +{ + unsigned int len, nents; + int i; + + nents = DIV_ROUND_UP(length, UINT_MAX); + for (i = 0; i < nents; i++) { + len = min_t(size_t, length, UINT_MAX); + length -= len; + /* + * DMABUF abuses scatterlist to create a scatterlist + * that does not have any CPU list, only the DMA list. + * Always set the page related values to NULL to ensure + * importers can't use it. The phys_addr based DMA API + * does not require the CPU list for mapping or unmapping. + */ + sg_set_page(sgl, NULL, 0, 0); + sg_dma_address(sgl) = addr + (dma_addr_t)i * UINT_MAX; + sg_dma_len(sgl) = len; + sgl = sg_next(sgl); + } + + return sgl; +} + +static unsigned int calc_sg_nents(struct dma_iova_state *state, + struct dma_buf_phys_vec *phys_vec, + size_t nr_ranges, size_t size) +{ + unsigned int nents = 0; + size_t i; + + if (!state || !dma_use_iova(state)) { + for (i = 0; i < nr_ranges; i++) + nents += DIV_ROUND_UP(phys_vec[i].len, UINT_MAX); + } else { + /* + * In IOVA case, there is only one SG entry which spans + * for whole IOVA address space, but we need to make sure + * that it fits sg->length, maybe we need more. + */ + nents = DIV_ROUND_UP(size, UINT_MAX); + } + + return nents; +} + +/** + * struct dma_buf_dma - holds DMA mapping information + * @sgt: Scatter-gather table + * @state: DMA IOVA state relevant in IOMMU-based DMA + * @size: Total size of DMA transfer + */ +struct dma_buf_dma { + struct sg_table sgt; + struct dma_iova_state *state; + size_t size; +}; + +/** + * dma_buf_phys_vec_to_sgt - Returns the scatterlist table of the attachment + * from arrays of physical vectors. This funciton is intended for MMIO memory + * only. + * @attach: [in] attachment whose scatterlist is to be returned + * @provider: [in] p2pdma provider + * @phys_vec: [in] array of physical vectors + * @nr_ranges: [in] number of entries in phys_vec array + * @size: [in] total size of phys_vec + * @dir: [in] direction of DMA transfer + * + * Returns sg_table containing the scatterlist to be returned; returns ERR_PTR + * on error. May return -EINTR if it is interrupted by a signal. + * + * On success, the DMA addresses and lengths in the returned scatterlist are + * PAGE_SIZE aligned. + * + * A mapping must be unmapped by using dma_buf_free_sgt(). + * + * NOTE: This function is intended for exporters. If direct traffic routing is + * mandatory exporter should call routing pci_p2pdma_map_type() before calling + * this function. + */ +struct sg_table *dma_buf_phys_vec_to_sgt(struct dma_buf_attachment *attach, + struct p2pdma_provider *provider, + struct dma_buf_phys_vec *phys_vec, + size_t nr_ranges, size_t size, + enum dma_data_direction dir) +{ + unsigned int nents, mapped_len = 0; + struct dma_buf_dma *dma; + struct scatterlist *sgl; + dma_addr_t addr; + size_t i; + int ret; + + dma_resv_assert_held(attach->dmabuf->resv); + + if (WARN_ON(!attach || !attach->dmabuf || !provider)) + /* This function is supposed to work on MMIO memory only */ + return ERR_PTR(-EINVAL); + + dma = kzalloc(sizeof(*dma), GFP_KERNEL); + if (!dma) + return ERR_PTR(-ENOMEM); + + switch (pci_p2pdma_map_type(provider, attach->dev)) { + case PCI_P2PDMA_MAP_BUS_ADDR: + /* + * There is no need in IOVA at all for this flow. + */ + break; + case PCI_P2PDMA_MAP_THRU_HOST_BRIDGE: + dma->state = kzalloc(sizeof(*dma->state), GFP_KERNEL); + if (!dma->state) { + ret = -ENOMEM; + goto err_free_dma; + } + + dma_iova_try_alloc(attach->dev, dma->state, 0, size); + break; + default: + ret = -EINVAL; + goto err_free_dma; + } + + nents = calc_sg_nents(dma->state, phys_vec, nr_ranges, size); + ret = sg_alloc_table(&dma->sgt, nents, GFP_KERNEL | __GFP_ZERO); + if (ret) + goto err_free_state; + + sgl = dma->sgt.sgl; + + for (i = 0; i < nr_ranges; i++) { + if (!dma->state) { + addr = pci_p2pdma_bus_addr_map(provider, + phys_vec[i].paddr); + } else if (dma_use_iova(dma->state)) { + ret = dma_iova_link(attach->dev, dma->state, + phys_vec[i].paddr, 0, + phys_vec[i].len, dir, + DMA_ATTR_MMIO); + if (ret) + goto err_unmap_dma; + + mapped_len += phys_vec[i].len; + } else { + addr = dma_map_phys(attach->dev, phys_vec[i].paddr, + phys_vec[i].len, dir, + DMA_ATTR_MMIO); + ret = dma_mapping_error(attach->dev, addr); + if (ret) + goto err_unmap_dma; + } + + if (!dma->state || !dma_use_iova(dma->state)) + sgl = fill_sg_entry(sgl, phys_vec[i].len, addr); + } + + if (dma->state && dma_use_iova(dma->state)) { + WARN_ON_ONCE(mapped_len != size); + ret = dma_iova_sync(attach->dev, dma->state, 0, mapped_len); + if (ret) + goto err_unmap_dma; + + sgl = fill_sg_entry(sgl, mapped_len, dma->state->addr); + } + + dma->size = size; + + /* + * No CPU list included — set orig_nents = 0 so others can detect + * this via SG table (use nents only). + */ + dma->sgt.orig_nents = 0; + + + /* + * SGL must be NULL to indicate that SGL is the last one + * and we allocated correct number of entries in sg_alloc_table() + */ + WARN_ON_ONCE(sgl); + return &dma->sgt; + +err_unmap_dma: + if (!i || !dma->state) { + ; /* Do nothing */ + } else if (dma_use_iova(dma->state)) { + dma_iova_destroy(attach->dev, dma->state, mapped_len, dir, + DMA_ATTR_MMIO); + } else { + for_each_sgtable_dma_sg(&dma->sgt, sgl, i) + dma_unmap_phys(attach->dev, sg_dma_address(sgl), + sg_dma_len(sgl), dir, DMA_ATTR_MMIO); + } + sg_free_table(&dma->sgt); +err_free_state: + kfree(dma->state); +err_free_dma: + kfree(dma); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_NS_GPL(dma_buf_phys_vec_to_sgt, "DMA_BUF"); + +/** + * dma_buf_free_sgt- unmaps the buffer + * @attach: [in] attachment to unmap buffer from + * @sgt: [in] scatterlist info of the buffer to unmap + * @dir: [in] direction of DMA transfer + * + * This unmaps a DMA mapping for @attached obtained + * by dma_buf_phys_vec_to_sgt(). + */ +void dma_buf_free_sgt(struct dma_buf_attachment *attach, struct sg_table *sgt, + enum dma_data_direction dir) +{ + struct dma_buf_dma *dma = container_of(sgt, struct dma_buf_dma, sgt); + int i; + + dma_resv_assert_held(attach->dmabuf->resv); + + if (!dma->state) { + ; /* Do nothing */ + } else if (dma_use_iova(dma->state)) { + dma_iova_destroy(attach->dev, dma->state, dma->size, dir, + DMA_ATTR_MMIO); + } else { + struct scatterlist *sgl; + + for_each_sgtable_dma_sg(sgt, sgl, i) + dma_unmap_phys(attach->dev, sg_dma_address(sgl), + sg_dma_len(sgl), dir, DMA_ATTR_MMIO); + } + + sg_free_table(sgt); + kfree(dma->state); + kfree(dma); + +} +EXPORT_SYMBOL_NS_GPL(dma_buf_free_sgt, "DMA_BUF"); diff --git a/drivers/gpu/drm/i915/gvt/kvmgt.c b/drivers/gpu/drm/i915/gvt/kvmgt.c index bbeba0d3fca8..3abc9206f1a8 100644 --- a/drivers/gpu/drm/i915/gvt/kvmgt.c +++ b/drivers/gpu/drm/i915/gvt/kvmgt.c @@ -1141,6 +1141,122 @@ static int intel_vgpu_set_irqs(struct intel_vgpu *vgpu, u32 flags, return func(vgpu, index, start, count, flags, data); } +static int intel_vgpu_ioctl_get_region_info(struct vfio_device *vfio_dev, + struct vfio_region_info *info, + struct vfio_info_cap *caps) +{ + struct vfio_region_info_cap_sparse_mmap *sparse = NULL; + struct intel_vgpu *vgpu = vfio_dev_to_vgpu(vfio_dev); + int nr_areas = 1; + int cap_type_id; + unsigned int i; + int ret; + + switch (info->index) { + case VFIO_PCI_CONFIG_REGION_INDEX: + info->offset = VFIO_PCI_INDEX_TO_OFFSET(info->index); + info->size = vgpu->gvt->device_info.cfg_space_size; + info->flags = VFIO_REGION_INFO_FLAG_READ | + VFIO_REGION_INFO_FLAG_WRITE; + break; + case VFIO_PCI_BAR0_REGION_INDEX: + info->offset = VFIO_PCI_INDEX_TO_OFFSET(info->index);< |