Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Here is my initial pull request for the networking subsystem during
  this merge window:

   1) Support for ESN in AH (RFC 4302) from Fan Du.

   2) Add full kernel doc for ethtool command structures, from Ben
      Hutchings.

   3) Add BCM7xxx PHY driver, from Florian Fainelli.

   4) Export computed TCP rate information in netlink socket dumps, from
      Eric Dumazet.

   5) Allow IPSEC SA to be dumped partially using a filter, from Nicolas
      Dichtel.

   6) Convert many drivers to pci_enable_msix_range(), from Alexander
      Gordeev.

   7) Record SKB timestamps more efficiently, from Eric Dumazet.

   8) Switch to microsecond resolution for TCP round trip times, also
      from Eric Dumazet.

   9) Clean up and fix 6lowpan fragmentation handling by making use of
      the existing inet_frag api for it's implementation.

  10) Add TX grant mapping to xen-netback driver, from Zoltan Kiss.

  11) Auto size SKB lengths when composing netlink messages based upon
      past message sizes used, from Eric Dumazet.

  12) qdisc dumps can take a long time, add a cond_resched(), From Eric
      Dumazet.

  13) Sanitize netpoll core and drivers wrt.  SKB handling semantics.
      Get rid of never-used-in-tree netpoll RX handling.  From Eric W
      Biederman.

  14) Support inter-address-family and namespace changing in VTI tunnel
      driver(s).  From Steffen Klassert.

  15) Add Altera TSE driver, from Vince Bridgers.

  16) Optimizing csum_replace2() so that it doesn't adjust the checksum
      by checksumming the entire header, from Eric Dumazet.

  17) Expand BPF internal implementation for faster interpreting, more
      direct translations into JIT'd code, and much cleaner uses of BPF
      filtering in non-socket ocntexts.  From Daniel Borkmann and Alexei
      Starovoitov"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1976 commits)
  netpoll: Use skb_irq_freeable to make zap_completion_queue safe.
  net: Add a test to see if a skb is freeable in irq context
  qlcnic: Fix build failure due to undefined reference to `vxlan_get_rx_port'
  net: ptp: move PTP classifier in its own file
  net: sxgbe: make "core_ops" static
  net: sxgbe: fix logical vs bitwise operation
  net: sxgbe: sxgbe_mdio_register() frees the bus
  Call efx_set_channels() before efx->type->dimension_resources()
  xen-netback: disable rogue vif in kthread context
  net/mlx4: Set proper build dependancy with vxlan
  be2net: fix build dependency on VxLAN
  mac802154: make csma/cca parameters per-wpan
  mac802154: allow only one WPAN to be up at any given time
  net: filter: minor: fix kdoc in __sk_run_filter
  netlink: don't compare the nul-termination in nla_strcmp
  can: c_can: Avoid led toggling for every packet.
  can: c_can: Simplify TX interrupt cleanup
  can: c_can: Store dlc private
  can: c_can: Reduce register access
  can: c_can: Make the code readable
  ...

101 files changed, 3018 insertions, 849 deletions

diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 677b4f01b2d0..6f76277baf39 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -13,10 +13,17 @@
 #define PHY_ID_BCM5461			0x002060c0
 #define PHY_ID_BCM57780			0x03625d90
 
+#define PHY_ID_BCM7366			0x600d8490
+#define PHY_ID_BCM7439			0x600d8480
+#define PHY_ID_BCM7445			0x600d8510
+#define PHY_ID_BCM7XXX_28		0x600d8400
+
 #define PHY_BCM_OUI_MASK		0xfffffc00
 #define PHY_BCM_OUI_1			0x00206000
 #define PHY_BCM_OUI_2			0x0143bc00
 #define PHY_BCM_OUI_3			0x03625c00
+#define PHY_BCM_OUI_4			0x600d0000
+#define PHY_BCM_OUI_5			0x03625e00
 
 
 #define PHY_BCM_FLAGS_MODE_COPPER	0x00000001
@@ -31,6 +38,59 @@
 #define PHY_BRCM_EXT_IBND_TX_ENABLE	0x00002000
 #define PHY_BRCM_CLEAR_RGMII_MODE	0x00004000
 #define PHY_BRCM_DIS_TXCRXC_NOENRGY	0x00008000
+/* Broadcom BCM7xxx specific workarounds */
+#define PHY_BRCM_100MBPS_WAR		0x00010000
 #define PHY_BCM_FLAGS_VALID		0x80000000
 
+/* Broadcom BCM54XX register definitions, common to most Broadcom PHYs */
+#define MII_BCM54XX_ECR		0x10	/* BCM54xx extended control register */
+#define MII_BCM54XX_ECR_IM	0x1000	/* Interrupt mask */
+#define MII_BCM54XX_ECR_IF	0x0800	/* Interrupt force */
+
+#define MII_BCM54XX_ESR		0x11	/* BCM54xx extended status register */
+#define MII_BCM54XX_ESR_IS	0x1000	/* Interrupt status */
+
+#define MII_BCM54XX_EXP_DATA	0x15	/* Expansion register data */
+#define MII_BCM54XX_EXP_SEL	0x17	/* Expansion register select */
+#define MII_BCM54XX_EXP_SEL_SSD	0x0e00	/* Secondary SerDes select */
+#define MII_BCM54XX_EXP_SEL_ER	0x0f00	/* Expansion register select */
+
+#define MII_BCM54XX_AUX_CTL	0x18	/* Auxiliary control register */
+#define MII_BCM54XX_ISR		0x1a	/* BCM54xx interrupt status register */
+#define MII_BCM54XX_IMR		0x1b	/* BCM54xx interrupt mask register */
+#define MII_BCM54XX_INT_CRCERR	0x0001	/* CRC error */
+#define MII_BCM54XX_INT_LINK	0x0002	/* Link status changed */
+#define MII_BCM54XX_INT_SPEED	0x0004	/* Link speed change */
+#define MII_BCM54XX_INT_DUPLEX	0x0008	/* Duplex mode changed */
+#define MII_BCM54XX_INT_LRS	0x0010	/* Local receiver status changed */
+#define MII_BCM54XX_INT_RRS	0x0020	/* Remote receiver status changed */
+#define MII_BCM54XX_INT_SSERR	0x0040	/* Scrambler synchronization error */
+#define MII_BCM54XX_INT_UHCD	0x0080	/* Unsupported HCD negotiated */
+#define MII_BCM54XX_INT_NHCD	0x0100	/* No HCD */
+#define MII_BCM54XX_INT_NHCDL	0x0200	/* No HCD link */
+#define MII_BCM54XX_INT_ANPR	0x0400	/* Auto-negotiation page received */
+#define MII_BCM54XX_INT_LC	0x0800	/* All counters below 128 */
+#define MII_BCM54XX_INT_HC	0x1000	/* Counter above 32768 */
+#define MII_BCM54XX_INT_MDIX	0x2000	/* MDIX status change */
+#define MII_BCM54XX_INT_PSERR	0x4000	/* Pair swap error */
+
+#define MII_BCM54XX_SHD		0x1c	/* 0x1c shadow registers */
+#define MII_BCM54XX_SHD_WRITE	0x8000
+#define MII_BCM54XX_SHD_VAL(x)	((x & 0x1f) << 10)
+#define MII_BCM54XX_SHD_DATA(x)	((x & 0x3ff) << 0)
+
+/*
+ * AUXILIARY CONTROL SHADOW ACCESS REGISTERS.  (PHY REG 0x18)
+ */
+#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
+#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB		0x0400
+#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA	0x0800
+
+#define MII_BCM54XX_AUXCTL_MISC_WREN	0x8000
+#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX	0x0200
+#define MII_BCM54XX_AUXCTL_MISC_RDSEL_MISC	0x7000
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC	0x0007
+
+#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL	0x0000
+
 #endif /* _LINUX_BRCMPHY_H */
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index fb0ab651a041..3ce5e526525f 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -33,8 +33,9 @@ enum can_mode {
 struct can_priv {
 	struct can_device_stats can_stats;
 
-	struct can_bittiming bittiming;
-	const struct can_bittiming_const *bittiming_const;
+	struct can_bittiming bittiming, data_bittiming;
+	const struct can_bittiming_const *bittiming_const,
+		*data_bittiming_const;
 	struct can_clock clock;
 
 	enum can_state state;
@@ -45,6 +46,7 @@ struct can_priv {
 	struct timer_list restart_timer;
 
 	int (*do_set_bittiming)(struct net_device *dev);
+	int (*do_set_data_bittiming)(struct net_device *dev);
 	int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
 	int (*do_get_state)(const struct net_device *dev,
 			    enum can_state *state);
@@ -111,6 +113,7 @@ struct can_priv *safe_candev_priv(struct net_device *dev);
 
 int open_candev(struct net_device *dev);
 void close_candev(struct net_device *dev);
+int can_change_mtu(struct net_device *dev, int new_mtu);
 
 int register_candev(struct net_device *dev);
 void unregister_candev(struct net_device *dev);
@@ -124,6 +127,8 @@ unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
 void can_free_echo_skb(struct net_device *dev, unsigned int idx);
 
 struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf);
+struct sk_buff *alloc_canfd_skb(struct net_device *dev,
+				struct canfd_frame **cfd);
 struct sk_buff *alloc_can_err_skb(struct net_device *dev,
 				  struct can_frame **cf);
 
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index c8e3e7e39c6b..0a114d05f68d 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -183,6 +183,9 @@ static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
  * hold the RTNL lock.
  *
  * See the structures used by these operations for further documentation.
+ * Note that for all operations using a structure ending with a zero-
+ * length array, the array is allocated separately in the kernel and
+ * is passed to the driver as an additional parameter.
  *
  * See &struct net_device and &struct net_device_ops for documentation
  * of the generic netdev features interface.
diff --git a/include/linux/filter.h b/include/linux/filter.h
index e568c8ef896b..262dcbb75ffe 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -9,28 +9,81 @@
 #include <linux/workqueue.h>
 #include <uapi/linux/filter.h>
 
-#ifdef CONFIG_COMPAT
-/*
- * A struct sock_filter is architecture independent.
+/* Internally used and optimized filter representation with extended
+ * instruction set based on top of classic BPF.
  */
+
+/* instruction classes */
+#define BPF_ALU64	0x07	/* alu mode in double word width */
+
+/* ld/ldx fields */
+#define BPF_DW		0x18	/* double word */
+#define BPF_XADD	0xc0	/* exclusive add */
+
+/* alu/jmp fields */
+#define BPF_MOV		0xb0	/* mov reg to reg */
+#define BPF_ARSH	0xc0	/* sign extending arithmetic shift right */
+
+/* change endianness of a register */
+#define BPF_END		0xd0	/* flags for endianness conversion: */
+#define BPF_TO_LE	0x00	/* convert to little-endian */
+#define BPF_TO_BE	0x08	/* convert to big-endian */
+#define BPF_FROM_LE	BPF_TO_LE
+#define BPF_FROM_BE	BPF_TO_BE
+
+#define BPF_JNE		0x50	/* jump != */
+#define BPF_JSGT	0x60	/* SGT is signed '>', GT in x86 */
+#define BPF_JSGE	0x70	/* SGE is signed '>=', GE in x86 */
+#define BPF_CALL	0x80	/* function call */
+#define BPF_EXIT	0x90	/* function return */
+
+/* BPF has 10 general purpose 64-bit registers and stack frame. */
+#define MAX_BPF_REG	11
+
+/* BPF program can access up to 512 bytes of stack space. */
+#define MAX_BPF_STACK	512
+
+/* Arg1, context and stack frame pointer register positions. */
+#define ARG1_REG	1
+#define CTX_REG		6
+#define FP_REG		10
+
+struct sock_filter_int {
+	__u8	code;		/* opcode */
+	__u8	a_reg:4;	/* dest register */
+	__u8	x_reg:4;	/* source register */
+	__s16	off;		/* signed offset */
+	__s32	imm;		/* signed immediate constant */
+};
+
+#ifdef CONFIG_COMPAT
+/* A struct sock_filter is architecture independent. */
 struct compat_sock_fprog {
 	u16		len;
-	compat_uptr_t	filter;		/* struct sock_filter * */
+	compat_uptr_t	filter;	/* struct sock_filter * */
 };
 #endif
 
+struct sock_fprog_kern {
+	u16			len;
+	struct sock_filter	*filter;
+};
+
 struct sk_buff;
 struct sock;
+struct seccomp_data;