Merge master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits)
  Blackfin serial driver: supporting BF548-EZKIT serial port
  Video Console: Blackfin doesnt support VGA console
  Blackfin arch: Add peripheral io API to gpio header file
  Blackfin arch: set up gpio interrupt IRQ_PJ9 for BF54x ATAPI PATA driver
  Blackfin arch: add missing CONFIG_LARGE_ALLOCS when upstream merging
  Blackfin arch: as pointed out by Robert P. J. Day, update the CPU_FREQ name to match current Kconfig
  Blackfin arch: extract the entry point from the linked kernel
  Blackfin arch: clean up some coding style issues
  Blackfin arch: combine the common code of free_initrd_mem and free_initmem
  Blackfin arch: Add Support for Peripheral PortMux and resouce allocation
  Blackfin arch: use PAGE_SIZE when doing aligns rather than hardcoded values
  Blackfin arch: fix bug set dma_address properly in dma_map_sg
  Blackfin arch: Disable CACHELINE_ALIGNED_L1 for BF54x by default
  Blackfin arch: Port the dm9000 driver to Blackfin by using the correct low-level io routines
  Blackfin arch: There is no CDPRIO Bit in the EBIU_AMGCTL Register of BF54x arch
  Blackfin arch: scrub dead code
  Blackfin arch: Fix Warning add some defines in BF54x header file
  Blackfin arch: add BF54x missing GPIO access functions
  Blackfin arch: Some memory and code optimizations - Fix SYS_IRQS
  Blackfin arch: Enable BF54x PIN/GPIO interrupts
  ...

35 files changed, 4012 insertions, 2794 deletions

diff --git a/include/asm-blackfin/Kbuild b/include/asm-blackfin/Kbuild
index c68e1680da01..71f8fe783258 100644
--- a/include/asm-blackfin/Kbuild
+++ b/include/asm-blackfin/Kbuild
@@ -1 +1,3 @@
 include include/asm-generic/Kbuild.asm
+
+header-y += fixed_code.h
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index 57f37ccdcdf1..c4d6cbbf96d4 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -67,6 +67,18 @@ extern void evt14_softirq(void);
 extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
 extern void bfin_gpio_interrupt_setup(int irq, int irq_pfx, int type);
 
+extern asmlinkage void finish_atomic_sections (struct pt_regs *regs);
+extern char fixed_code_start;
+extern char fixed_code_end;
+extern int atomic_xchg32(void);
+extern int atomic_cas32(void);
+extern int atomic_add32(void);
+extern int atomic_sub32(void);
+extern int atomic_ior32(void);
+extern int atomic_and32(void);
+extern int atomic_xor32(void);
+extern void sigreturn_stub(void);
+
 extern void *l1_data_A_sram_alloc(size_t);
 extern void *l1_data_B_sram_alloc(size_t);
 extern void *l1_inst_sram_alloc(size_t);
diff --git a/include/asm-blackfin/cplbinit.h b/include/asm-blackfin/cplbinit.h
index 3bad2d1e6a8c..bec6ecdf1bdb 100644
--- a/include/asm-blackfin/cplbinit.h
+++ b/include/asm-blackfin/cplbinit.h
@@ -57,8 +57,8 @@ struct cplb_tab {
 	u16 size;
 };
 
-u_long icplb_table[MAX_CPLBS+1];
-u_long dcplb_table[MAX_CPLBS+1];
+extern u_long icplb_table[MAX_CPLBS+1];
+extern u_long dcplb_table[MAX_CPLBS+1];
 
 /* Till here we are discussing about the static memory management model.
  * However, the operating envoronments commonly define more CPLB
@@ -70,134 +70,27 @@ u_long dcplb_table[MAX_CPLBS+1];
  */
 
 #ifdef CONFIG_CPLB_SWITCH_TAB_L1
-u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data));
-u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data));
+extern u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data));
+extern u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data));
 
 #ifdef CONFIG_CPLB_INFO
-u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data));
-u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data));
+extern u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data));
+extern u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data));
 #endif /* CONFIG_CPLB_INFO */
 
 #else
 
-u_long ipdt_table[MAX_SWITCH_I_CPLBS+1];
-u_long dpdt_table[MAX_SWITCH_D_CPLBS+1];
+extern u_long ipdt_table[MAX_SWITCH_I_CPLBS+1];
+extern u_long dpdt_table[MAX_SWITCH_D_CPLBS+1];
 
 #ifdef CONFIG_CPLB_INFO
-u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS];
-u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS];
+extern u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS];
+extern u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS];
 #endif /* CONFIG_CPLB_INFO */
 
 #endif /*CONFIG_CPLB_SWITCH_TAB_L1*/
 
-struct s_cplb {
-	struct cplb_tab init_i;
-	struct cplb_tab init_d;
-	struct cplb_tab switch_i;
-	struct cplb_tab switch_d;
-};
+extern unsigned long reserved_mem_dcache_on;
+extern unsigned long reserved_mem_icache_on;
 
-#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
-static struct cplb_desc cplb_data[] = {
-	{
-		.start = 0,
-		.end = SIZE_4K,
-		.psize = SIZE_4K,
-		.attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB,
-		.i_conf = SDRAM_OOPS,
-		.d_conf = SDRAM_OOPS,
-#if defined(CONFIG_DEBUG_HUNT_FOR_ZERO)
-		.valid = 1,
-#else
-		.valid = 0,
-#endif
-		.name = "ZERO Pointer Saveguard",
-	},
-	{
-		.start = L1_CODE_START,
-		.end = L1_CODE_START + L1_CODE_LENGTH,
-		.psize = SIZE_4M,
-		.attr = INITIAL_T | SWITCH_T | I_CPLB,
-		.i_conf = L1_IMEMORY,
-		.d_conf = 0,
-		.valid = 1,
-		.name = "L1 I-Memory",
-	},
-	{
-		.start = L1_DATA_A_START,
-		.end = L1_DATA_B_START + L1_DATA_B_LENGTH,
-		.psize = SIZE_4M,
-		.attr = INITIAL_T | SWITCH_T | D_CPLB,
-		.i_conf = 0,
-		.d_conf = L1_DMEMORY,
-#if ((L1_DATA_A_LENGTH > 0) || (L1_DATA_B_LENGTH > 0))
-		.valid = 1,
-#else
-		.valid = 0,
-#endif
-		.name = "L1 D-Memory",
-	},
-	{
-		.start = 0,
-		.end = 0,  /* dynamic */
-		.psize = 0,
-		.attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB,
-		.i_conf =  SDRAM_IGENERIC,
-		.d_conf =  SDRAM_DGENERIC,
-		.valid = 1,
-		.name = "SDRAM Kernel",
-	},
-	{
-		.start = 0, /* dynamic */
-		.end = 0, /* dynamic */
-		.psize = 0,
-		.attr = INITIAL_T | SWITCH_T | D_CPLB,
-		.i_conf =  SDRAM_IGENERIC,
-		.d_conf =  SDRAM_DNON_CHBL,
-		.valid = 1,
-		.name = "SDRAM RAM MTD",
-	},
-	{
-		.start = 0, /* dynamic */
-		.end = 0,   /* dynamic */
-		.psize = SIZE_1M,
-		.attr = INITIAL_T | SWITCH_T | D_CPLB,
-		.d_conf = SDRAM_DNON_CHBL,
-		.valid = 1,//(DMA_UNCACHED_REGION > 0),
-		.name = "SDRAM Uncached DMA ZONE",
-	},
-	{
-		.start = 0, /* dynamic */
-		.end = 0, /* dynamic */
-		.psize = 0,
-		.attr = SWITCH_T | D_CPLB,
-		.i_conf = 0, /* dynamic */
-		.d_conf = 0, /* dynamic */
-		.valid = 1,
-		.name = "SDRAM Reserved Memory",
-	},
-	{
-		.start = ASYNC_BANK0_BASE,
-		.end = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE,
-		.psize = 0,
-		.attr = SWITCH_T | D_CPLB,
-		.d_conf = SDRAM_EBIU,
-		.valid = 1,
-		.name = "ASYNC Memory",
-	},
-	{
-#if defined(CONFIG_BF561)
-		.start = L2_SRAM,
-		.end = L2_SRAM_END,
-		.psize = SIZE_1M,
-		.attr = SWITCH_T | D_CPLB,
-		.i_conf = L2_MEMORY,
-		.d_conf = L2_MEMORY,
-		.valid = 1,
-#else
-		.valid = 0,
-#endif
-		.name = "L2 Memory",
-	}
-};
-#endif
+extern void generate_cpl_tables(void);
diff --git a/include/asm-blackfin/fixed_code.h b/include/asm-blackfin/fixed_code.h
new file mode 100644
index 000000000000..e6df84ee1557
--- /dev/null
+++ b/include/asm-blackfin/fixed_code.h
@@ -0,0 +1,20 @@
+/* This file defines the fixed addresses where userspace programs can find
+   atomic code sequences.  */
+
+#define FIXED_CODE_START	0x400
+
+#define SIGRETURN_STUB		0x400
+
+#define ATOMIC_SEQS_START	0x410
+
+#define ATOMIC_XCHG32		0x410
+#define ATOMIC_CAS32		0x420
+#define ATOMIC_ADD32		0x430
+#define ATOMIC_SUB32		0x440
+#define ATOMIC_IOR32		0x450
+#define ATOMIC_AND32		0x460
+#define ATOMIC_XOR32		0x470
+
+#define ATOMIC_SEQS_END		0x480
+
+#define FIXED_CODE_END		0x480
diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
index d98d77ad71f7..7480cfa7e2d6 100644
--- a/include/asm-blackfin/gpio.h
+++ b/include/asm-blackfin/gpio.h
@@ -204,8 +204,62 @@
 
 #endif
 
+#ifdef BF548_FAMILY
+#include <asm-blackfin/mach-bf548/gpio.h>
+#endif
+
 #ifdef BF561_FAMILY
 #define MAX_BLACKFIN_GPIOS 48
+
+#define	GPIO_PF0	0
+#define	GPIO_PF1	1
+#define	GPIO_PF2	2
+#define	GPIO_PF3	3
+#define	GPIO_PF4	4
+#define	GPIO_PF5	5
+#define	GPIO_PF6	6
+#define	GPIO_PF7	7
+#define	GPIO_PF8	8
+#define	GPIO_PF9	9
+#define	GPIO_PF10	10
+#define	GPIO_PF11	11
+#define	GPIO_PF12	12
+#define	GPIO_PF13	13
+#define	GPIO_PF14	14
+#define	GPIO_PF15	15
+#define	GPIO_PF16	16
+#define	GPIO_PF17	17
+#define	GPIO_PF18	18
+#define	GPIO_PF19	19
+#define	GPIO_PF20	20
+#define	GPIO_PF21	21
+#define	GPIO_PF22	22
+#define	GPIO_PF23	23
+#define	GPIO_PF24	24
+#define	GPIO_PF25	25
+#define	GPIO_PF26	26
+#define	GPIO_PF27	27
+#define	GPIO_PF28	28
+#define	GPIO_PF29	29
+#define	GPIO_PF30	30
+#define	GPIO_PF31	31
+#define	GPIO_PF32	32
+#define	GPIO_PF33	33
+#define	GPIO_PF34	34
+#define	GPIO_PF35	35
+#define	GPIO_PF36	36
+#define	GPIO_PF37	37
+#define	GPIO_PF38	38
+#define	GPIO_PF39	39
+#define	GPIO_PF40	40
+#define	GPIO_PF41	41
+#define	GPIO_PF42	42
+#define	GPIO_PF43	43
+#define	GPIO_PF44	44
+#define	GPIO_PF45	45
+#define	GPIO_PF46	46
+#define	GPIO_PF47	47
+
 #define PORT_FIO0 GPIO_0
 #define PORT_FIO1 GPIO_16
 #define PORT_FIO2 GPIO_32
@@ -230,6 +284,7 @@
 * MODIFICATION HISTORY :
 **************************************************************/
 
+#ifndef BF548_FAMILY
 void set_gpio_dir(unsigned short, unsigned short);
 void set_gpio_inen(unsigned short, unsigned short);
 void set_gpio_polar(unsigned short, unsigned short);
@@ -299,6 +354,7 @@ struct gpio_port_t {
 	unsigned short dummy16;
 	unsigned short inen;
 };
+#endif
 
 #ifdef CONFIG_PM
 #define PM_WAKE_RISING	0x1
@@ -357,8 +413,10 @@ void gpio_free(unsigned short);
 void gpio_set_value(unsigned short gpio, unsigned short arg);
 unsigned short gpio_get_value(unsigned short gpio);
 
+#ifndef BF548_FAMILY
 #define gpio_get_value(gpio) 		get_gpio_data(gpio)
 #define gpio_set_value(gpio, value)	set_gpio_data(gpio, value)
+#endif
 
 void gpio_direction_input(unsigned short gpio);
 void gpio_direction_output(unsigned short gpio);
diff --git a/include/asm-blackfin/hardirq.h b/include/asm-blackfin/hardirq.h
index 0cab0d35badc..b6b19f1b9dab 100644
--- a/include/asm-blackfin/hardirq.h
+++ b/include/asm-blackfin/hardirq.h
@@ -28,7 +28,11 @@ typedef struct {
  * SOFTIRQ_MASK: 0x00ff0000
  */
 
+#if NR_IRQS > 256
+#define HARDIRQ_BITS	9
+#else
 #define HARDIRQ_BITS	8
+#endif
 
 #ifdef NR_IRQS
 # if (1 << HARDIRQ_BITS) < NR_IRQS
diff --git a/include/asm-blackfin/kgdb.h b/include/asm-blackfin/kgdb.h
new file mode 100644
index 000000000000..532bd9052004
--- /dev/null
+++ b/include/asm-blackfin/kgdb.h
@@ -0,0 +1,183 @@
+/*
+ * File:         include/asm-blackfin/kgdb.h
+ * Based on:
+ * Author:       Sonic Zhang
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:          $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
+ *
+ * Modified:
+ *               Copyright 2005-2006 Analog Devices Inc.
+ *
+ * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#ifndef __ASM_BLACKFIN_KGDB_H__
+#define __ASM_BLACKFIN_KGDB_H__
+
+#include <linux/ptrace.h>
+
+/* gdb locks */
+#define KGDB_MAX_NO_CPUS 8
+
+/************************************************************************/
+/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
+/* at least NUMREGBYTES*2 are needed for register packets */
+/* Longer buffer is needed to list all threads */
+#define BUFMAX 2048
+
+/*
+ *  Note that this register image is different from
+ *  the register image that Linux produces at interrupt time.
+ *  
+ *  Linux's register image is defined by struct pt_regs in ptrace.h.
+ */
+enum regnames {
+  /* Core Registers */
+  BFIN_R0 = 0,
+  BFIN_R1,
+  BFIN_R2,
+  BFIN_R3,
+  BFIN_R4,
+  BFIN_R5,
+  BFIN_R6,
+  BFIN_R7,
+  BFIN_P0,
+  BFIN_P1,
+  BFIN_P2,
+  BFIN_P3,
+  BFIN_P4,
+  BFIN_P5,
+  BFIN_SP,
+  BFIN_FP,
+  BFIN_I0,
+  BFIN_I1,
+  BFIN_I2,
+  BFIN_I3,
+  BFIN_M0,
+  BFIN_M1,
+  BFIN_M2,
+  BFIN_M3,
+  BFIN_B0,
+  BFIN_B1,
+  BFIN_B2,
+  BFIN_B3,
+  BFIN_L0,
+  BFIN_L1,
+  BFIN_L2,
+  BFIN_L3,
+  BFIN_A0_DOT_X,
+  BFIN_A0_DOT_W,
+  BFIN_A1_DOT_X,
+  BFIN_A1_DOT_W,
+  BFIN_ASTAT,
+  BFIN_RETS,
+  BFIN_LC0,
+  BFIN_LT0,
+  BFIN_LB0,
+  BFIN_LC1,
+  BFIN_LT1,
+  BFIN_LB1,
+  BFIN_CYCLES,
+  BFIN_CYCLES2,
+  BFIN_USP,
+  BFIN_SEQSTAT,
+  BFIN_SYSCFG,
+  BFIN_RETI,
+  BFIN_RETX,
+  BFIN_RETN,
+  BFIN_RETE,
+  
+  /* Pseudo Registers */
+  BFIN_PC,
+  BFIN_CC,
+  BFIN_EXTRA1,		/* Address of .text section.  */
+  BFIN_EXTRA2,		/* Address of .data section.  */
+  BFIN_EXTRA3,		/* Address of .bss section.  */
+  BFIN_FDPIC_EXEC, 
+  BFIN_FDPIC_INTERP,
+
+  /* MMRs */
+  BFIN_IPEND,
+
+  /* LAST ENTRY SHOULD NOT BE CHANGED.  */
+  BFIN_NUM_REGS		/* The number of all registers.  */
+};
+
+/* Number of bytes of registers.  */
+#define NUMREGBYTES BFIN_NUM_REGS*4
+
+#define BREAKPOINT() asm("   EXCPT 2;");
+#define BREAK_INSTR_SIZE       2
+#define HW_BREAKPOINT_NUM		6
+
+/* Instruction watchpoint address control register bits mask */
+#define WPPWR		0x1
+#define WPIREN01	0x2
+#define WPIRINV01	0x4
+#define WPIAEN0		0x8
+#define WPIAEN1		0x10
+#define WPICNTEN0	0x20
+#define WPICNTEN1	0x40
+#define EMUSW0		0x80
+#define EMUSW1		0x100
+#define WPIREN23	0x200
+#define WPIRINV23	0x400
+#define WPIAEN2		0x800
+#define WPIAEN3		0x1000
+#define WPICNTEN2	0x2000
+#define WPICNTEN3	0x4000
+#define EMUSW2		0x8000
+#define EMUSW3		0x10000
+#define WPIREN45	0x20000
+#define WPIRINV45	0x40000
+#define WPIAEN4		0x80000
+#define WPIAEN5		0x100000
+#define WPICNTEN4	0x200000
+#define WPICNTEN5	0x400000
+#define EMUSW4		0x800000
+#define EMUSW5		0x1000000
+#define WPAND		0x2000000
+
+/* Data watchpoint address control register bits mask */
+#define WPDREN01	0x1
+#define WPDRINV01	0x2
+#define WPDAEN0		0x4
+#define WPDAEN1		0x8
+#define WPDCNTEN0	0x10
+#define WPDCNTEN1	0x20
+#define WPDSRC0		0xc0
+#define WPDACC0		0x300
+#define WPDSRC1		0xc00
+#define WPDACC1		0x3000
+
+/* Watchpoint status register bits mask */
+#define STATIA0		0x1
+#define STATIA1		0x2
+#define STATIA2		0x4
+#define STATIA3		0x8
+#define STATIA4		0x10
+#define STATIA5		0x20
+#define STATDA0		0x40
+#define STATDA1		0x80
+
+extern void kgdb_print(const char *fmt, ...);
+
+#endif
diff --git a/include/asm-blackfin/mach-bf533/dma.h b/include/asm-blackfin/mach-bf533/dma.h
index bd9d5e94307d..16c672c01d80 100644
--- a/include/asm-blackfin/mach-bf533/dma.h
+++ b/include/asm-blackfin/mach-bf533/dma.h
@@ -51,4 +51,7 @@
 #define CH_MEM_STREAM1_DEST     10	 /* TX */
 #define CH_MEM_STREAM1_SRC      11	 /* RX */
 
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
+
 #endif
diff --git a/include/asm-blackfin/mach-bf533/portmux.h b/include/asm-blackfin/mach-bf533/portmux.h
new file mode 100644
index 000000000000..b88d7a03ee3e
--- /dev/null
+++ b/include/asm-blackfin/mach-bf533/portmux.h
@@ -0,0 +1,65 @@
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define P_PPI0_CLK	(P_DONTCARE)
+#define P_PPI0_FS1	(P_DONTCARE)
+#define P_PPI0_FS2	(P_DONTCARE)
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PF8))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PF9))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PF10))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PF11))
+#define P_PPI0_D0	(P_DONTCARE)
+#define P_PPI0_D1	(P_DONTCARE)
+#define P_PPI0_D2	(P_DONTCARE)
+#define P_PPI0_D3	(P_DONTCARE)
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PF15))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PF14))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PF13))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PF12))
+
+#define P_SPORT1_TSCLK	(P_DONTCARE)
+#define P_SPORT1_RSCLK	(P_DONTCARE)
+#define P_SPORT0_TSCLK	(P_DONTCARE)
+#define P_SPORT0_RSCLK	(P_DONTCARE)
+#define P_UART0_RX	(P_DONTCARE)
+#define P_UART0_TX	(P_DONTCARE)
+#define P_SPORT1_DRSEC	(P_DONTCARE)
+#define P_SPORT1_RFS	(P_DONTCARE)
+#define P_SPORT1_DTPRI	(P_DONTCARE)
+#define P_SPORT1_DTSEC	(P_DONTCARE)
+#define P_SPORT1_TFS	(P_DONTCARE)
+#define P_SPORT1_DRPRI	(P_DONTCARE)
+#define P_SPORT0_DRSEC	(P_DONTCARE)
+#define P_SPORT0_RFS	(P_DONTCARE)
+#define P_SPORT0_DTPRI	(P_DONTCARE)
+#define P_SPORT0_DTSEC	(P_DONTCARE)
+#define P_SPORT0_TFS	(P_DONTCARE)
+#define P_SPORT0_DRPRI	(P_DONTCARE)
+
+#define P_SPI0_MOSI	(P_DONTCARE)
+#define P_SPI0_MIS0	(P_DONTCARE)
+#define P_SPI0_SCK	(P_DONTCARE)
+#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF0))
+
+#define P_TMR2		(P_DONTCARE)
+#define P_TMR1		(P_DONTCARE)
+#define P_TMR0		(P_DONTCARE)
+#define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF1))
+
+
+
+
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/include/asm-blackfin/mach-bf537/dma.h b/include/asm-blackfin/mach-bf537/dma.h
index 7a964040870a..021991984e6e 100644
--- a/include/asm-blackfin/mach-bf537/dma.h
+++ b/include/asm-blackfin/mach-bf537/dma.h
@@ -52,4 +52,7 @@
 #define CH_MEM_STREAM1_DEST	14	 /* TX */
 #define CH_MEM_STREAM1_SRC 	15	 /* RX */
 
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
+
 #endif
diff --git a/include/asm-blackfin/mach-bf537/portmux.h b/include/asm-blackfin/mach-bf537/portmux.h
new file mode 100644
index 000000000000..23e13c5abc4d
--- /dev/null
+++ b/include/asm-blackfin/mach-bf537/portmux.h
@@ -0,0 +1,109 @@
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define P_UART0_TX	(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_UART0_RX	(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_UART1_TX	(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_UART1_RX	(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_TMR5		(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_TMR4		(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_TMR3		(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+#define P_TMR2		(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_TMR1		(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_TMR0		(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_SPI0_SSEL1	(P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_SPI0_MOSI	(P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_SPI0_MISO	(P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_SPI0_SCK	(P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_SPI0_SS	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_PPI0_CLK	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+#define P_DMAR0		(P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+#define P_DMAR1		(P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+#define P_TMR7		(P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+#define P_TMR6		(P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+#define P_SPI0_SSEL6	(P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+#define P_SPI0_SSEL5	(P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+#define P_SPI0_SSEL4	(P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+#define P_PPI0_FS3	(P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+#define P_PPI0_FS2	(P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+#define P_PPI0_FS1	(P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+#define P_TACLK0	(P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+#define P_TMRCLK	(P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+
+#define P_PPI0_D0	(P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
+#define P_PPI0_D1	(P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_PPI0_D2	(P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0))
+#define P_PPI0_D3	(P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
+#define P_PPI0_D4	(P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
+#define P_PPI0_D5	(P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_PPI0_D6	(P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_PPI0_D7	(P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_PPI0_D8	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_PPI0_D9	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_PPI0_D10	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+#define P_PPI0_D11	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0))
+#define P_PPI0_D12	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_PPI0_D13	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_PPI0_D14	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+#define P_PPI0_D15	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#define P_SPORT1_DRSEC	(P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1))
+#define P_SPORT1_DTSEC	(P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1))
+#define P_SPORT1_RSCLK	(P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1))
+#define P_SPORT1_RFS	(P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_SPORT1_DRPRI	(P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1))
+#define P_SPORT1_TSCLK	(P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
+#define P_SPORT1_TFS	(P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1))
+#define P_SPORT1_DTPRI	(P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+
+#define P_MII0_ETxD0	(P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_MII0_ETxD1	(P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_MII0_ETxD2	(P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_MII0_ETxD3	(P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_MII0_ETxEN	(P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_MII0_TxCLK	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_MII0_PHYINT	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_MII0_COL	(P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+#define P_MII0_ERxD0	(P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0))
+#define P_MII0_ERxD1	(P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0))
+#define P_MII0_ERxD2	(P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0))
+#define P_MII0_ERxD3	(P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0))
+#define P_MII0_ERxDV	(P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0))
+#define P_MII0_ERxCLK	(P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0))
+#define P_MII0_ERxER	(P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0))
+#define P_MII0_CRS	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0))
+#define P_RMII0_REF_CLK	(P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1))
+#define P_RMII0_MDINT	(P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_RMII0_CRS_DV	(P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1))
+
+#define PORT_PJ0	(GPIO_PH15 + 1)
+#define PORT_PJ1	(GPIO_PH15 + 2)
+#define PORT_PJ2	(GPIO_PH15 + 3)
+#define PORT_PJ3	(GPIO_PH15 + 4)
+#define PORT_PJ4	(GPIO_PH15 + 5)
+#define PORT_PJ5	(GPIO_PH15 + 6)
+#define PORT_PJ6	(GPIO_PH15 + 7)
+#define PORT_PJ7	(GPIO_PH15 + 8)
+#define PORT_PJ8	(GPIO_PH15 + 9)
+#define PORT_PJ9	(GPIO_PH15 + 10)
+#define PORT_PJ10	(GPIO_PH15 + 11)
+#define PORT_PJ11	(GPIO_PH15 + 12)
+
+#define P_MDC		(P_DEFINED | P_IDENT(PORT_PJ0) | P_FUNCT(0))
+#define P_MDIO		(P_DEFINED | P_IDENT(PORT_PJ1) | P_FUNCT(0))
+#define P_TWI0_SCL	(P_DEFINED | P_IDENT(PORT_PJ2) | P_FUNCT(0))
+#define P_TWI0_SDA	(P_DEFINED | P_IDENT(PORT_PJ3) | P_FUNCT(0))
+#define P_SPORT0_DRSEC	(P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(0))
+#define P_SPORT0_DTSEC	(P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(0))
+#define P_SPORT0_RSCLK	(P_DEFINED | P_IDENT(PORT_PJ6) | P_FUNCT(0))
+#define P_SPORT0_RFS	(P_DEFINED | P_IDENT(PORT_PJ7) | P_FUNCT(0))
+#define P_SPORT0_DRPRI	(P_DEFINED | P_IDENT(PORT_PJ8) | P_FUNCT(0))
+#define P_SPORT0_TSCLK	(P_DEFINED | P_IDENT(PORT_PJ9) | P_FUNCT(0))
+#define P_SPORT0_TFS	(P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(0))
+#define P_SPORT0_DTPRI	(P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
+#define P_CAN0_RX	(P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(1))
+#define P_CAN0_TX	(P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(1))
+#define P_SPI0_SSEL3	(P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(1))
+#define P_SPI0_SSEL2	(P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
+#define P_SPI0_SSEL7	(P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(2))
+
+#endif /* _MACH_PORTMUX_H_ */
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
new file mode 100644
index 000000000000..aca1d4ba145c
--- /dev/null
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -0,0 +1,74 @@
+
+/*
+ * File:         include/asm-blackfin/mach-bf548/ano