Merge tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block

Pull libata updates from Jens Axboe:
 "The big change in this round is that we're finally in a position where
  we can sanely remove the old drivers/ide/ code, as libata covers
  everything we need by now.

  This is exciting for two reasons:

   1) we delete a lot of legacy code that doesn't really meet the
      standards we have today, and

   2) it enables us to clean up various bits in the block layer that
      exist only because of the old IDE code.

  Outside of that, just a few minor fixes here, fixups for warnings,
  etc"

* tag 'for-5.14/libata-2021-06-27' of git://git.kernel.dk/linux-block: (29 commits)
  ata: rb532_cf: remove redundant codes
  ide: remove the legacy ide driver
  m68k: use libata instead of the legacy ide driver
  ARM: disable CONFIG_IDE in pxa_defconfig
  ARM: disable CONFIG_IDE in footbridge_defconfig
  alpha: use libata instead of the legacy ide driver
  pata_cypress: add a module option to disable BM-DMA
  ata: pata_macio: Avoid overwriting initialised field in 'pata_macio_sht'
  ata: pata_serverworks: Avoid overwriting initialised field in 'serverworks_osb4_sht
  ata: pata_sc1200: sc1200_sht'Avoid overwriting initialised field in '
  ata: pata_cs5530: Avoid overwriting initialised field in 'cs5530_sht'
  ata: pata_cs5520: Avoid overwriting initialised field in 'cs5520_sht'
  ata: pata_atiixp: Avoid overwriting initialised field in 'atiixp_sht'
  ata: sata_nv: Do not over-write initialise fields in 'nv_adma_sht' and 'nv_swncq_sht'
  ata: sata_mv: Do not over-write initialise fields in 'mv6_sht'
  ata: sata_sil24: Do not over-write initialise fields in 'sil24_sht'
  ata: ahci: Ensure initialised fields are not overwritten in AHCI_SHT()
  ata: include: libata: Move fields commonly over-written to separate MACRO
  ahci: Add support for Dell S140 and later controllers
  ata: ahci_sunxi: Disable DIPM
  ...

4 files changed, 11 insertions, 1629 deletions

diff --git a/include/linux/ata.h b/include/linux/ata.h
index 6e67aded28f8..1b44f40c7700 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -13,7 +13,7 @@
 #ifndef __LINUX_ATA_H__
 #define __LINUX_ATA_H__
 
-#include <linux/kernel.h>
+#include <linux/bits.h>
 #include <linux/string.h>
 #include <linux/types.h>
 #include <asm/byteorder.h>
diff --git a/include/linux/ide.h b/include/linux/ide.h
deleted file mode 100644
index 2c300689a51a..000000000000
--- a/include/linux/ide.h
+++ /dev/null
@@ -1,1623 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _IDE_H
-#define _IDE_H
-/*
- *  linux/include/linux/ide.h
- *
- *  Copyright (C) 1994-2002  Linus Torvalds & authors
- */
-
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/ata.h>
-#include <linux/blk-mq.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/bitops.h>
-#include <linux/bio.h>
-#include <linux/pci.h>
-#include <linux/completion.h>
-#include <linux/pm.h>
-#include <linux/mutex.h>
-/* for request_sense */
-#include <linux/cdrom.h>
-#include <scsi/scsi_cmnd.h>
-#include <asm/byteorder.h>
-#include <asm/io.h>
-
-/*
- * Probably not wise to fiddle with these
- */
-#define SUPPORT_VLB_SYNC 1
-#define IDE_DEFAULT_MAX_FAILURES	1
-#define ERROR_MAX	8	/* Max read/write errors per sector */
-#define ERROR_RESET	3	/* Reset controller every 4th retry */
-#define ERROR_RECAL	1	/* Recalibrate every 2nd retry */
-
-struct device;
-
-/* values for ide_request.type */
-enum ata_priv_type {
-	ATA_PRIV_MISC,
-	ATA_PRIV_TASKFILE,
-	ATA_PRIV_PC,
-	ATA_PRIV_SENSE,		/* sense request */
-	ATA_PRIV_PM_SUSPEND,	/* suspend request */
-	ATA_PRIV_PM_RESUME,	/* resume request */
-};
-
-struct ide_request {
-	struct scsi_request sreq;
-	u8 sense[SCSI_SENSE_BUFFERSIZE];
-	u8 type;
-	void *special;
-};
-
-static inline struct ide_request *ide_req(struct request *rq)
-{
-	return blk_mq_rq_to_pdu(rq);
-}
-
-static inline bool ata_misc_request(struct request *rq)
-{
-	return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_MISC;
-}
-
-static inline bool ata_taskfile_request(struct request *rq)
-{
-	return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_TASKFILE;
-}
-
-static inline bool ata_pc_request(struct request *rq)
-{
-	return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_PC;
-}
-
-static inline bool ata_sense_request(struct request *rq)
-{
-	return blk_rq_is_private(rq) && ide_req(rq)->type == ATA_PRIV_SENSE;
-}
-
-static inline bool ata_pm_request(struct request *rq)
-{
-	return blk_rq_is_private(rq) &&
-		(ide_req(rq)->type == ATA_PRIV_PM_SUSPEND ||
-		 ide_req(rq)->type == ATA_PRIV_PM_RESUME);
-}
-
-/* Error codes returned in result to the higher part of the driver. */
-enum {
-	IDE_DRV_ERROR_GENERAL	= 101,
-	IDE_DRV_ERROR_FILEMARK	= 102,
-	IDE_DRV_ERROR_EOD	= 103,
-};
-
-/*
- * Definitions for accessing IDE controller registers
- */
-#define IDE_NR_PORTS		(10)
-
-struct ide_io_ports {
-	unsigned long	data_addr;
-
-	union {
-		unsigned long error_addr;	/*   read:  error */
-		unsigned long feature_addr;	/*  write: feature */
-	};
-
-	unsigned long	nsect_addr;
-	unsigned long	lbal_addr;
-	unsigned long	lbam_addr;
-	unsigned long	lbah_addr;
-
-	unsigned long	device_addr;
-
-	union {
-		unsigned long status_addr;	/*  read: status  */
-		unsigned long command_addr;	/* write: command */
-	};
-
-	unsigned long	ctl_addr;
-
-	unsigned long	irq_addr;
-};
-
-#define OK_STAT(stat,good,bad)	(((stat)&((good)|(bad)))==(good))
-
-#define BAD_R_STAT	(ATA_BUSY | ATA_ERR)
-#define BAD_W_STAT	(BAD_R_STAT | ATA_DF)
-#define BAD_STAT	(BAD_R_STAT | ATA_DRQ)
-#define DRIVE_READY	(ATA_DRDY | ATA_DSC)
-
-#define BAD_CRC		(ATA_ABORTED | ATA_ICRC)
-
-#define SATA_NR_PORTS		(3)	/* 16 possible ?? */
-
-#define SATA_STATUS_OFFSET	(0)
-#define SATA_ERROR_OFFSET	(1)
-#define SATA_CONTROL_OFFSET	(2)
-
-/*
- * Our Physical Region Descriptor (PRD) table should be large enough
- * to handle the biggest I/O request we are likely to see.  Since requests
- * can have no more than 256 sectors, and since the typical blocksize is
- * two or more sectors, we could get by with a limit of 128 entries here for
- * the usual worst case.  Most requests seem to include some contiguous blocks,
- * further reducing the number of table entries required.
- *
- * The driver reverts to PIO mode for individual requests that exceed
- * this limit (possible with 512 byte blocksizes, eg. MSDOS f/s), so handling
- * 100% of all crazy scenarios here is not necessary.
- *
- * As it turns out though, we must allocate a full 4KB page for this,
- * so the two PRD tables (ide0 & ide1) will each get half of that,
- * allowing each to have about 256 entries (8 bytes each) from this.
- */
-#define PRD_BYTES       8
-#define PRD_ENTRIES	256
-
-/*
- * Some more useful definitions
- */
-#define PARTN_BITS	6	/* number of minor dev bits for partitions */
-#define MAX_DRIVES	2	/* per interface; 2 assumed by lots of code */
-
-/*
- * Timeouts for various operations:
- */
-enum {
-	/* spec allows up to 20ms, but CF cards and SSD drives need more */
-	WAIT_DRQ	= 1 * HZ,	/* 1s */
-	/* some laptops are very slow */
-	WAIT_READY	= 5 * HZ,	/* 5s */
-	/* should be less than 3ms (?), if all ATAPI CD is closed at boot */
-	WAIT_PIDENTIFY	= 10 * HZ,	/* 10s */
-	/* worst case when spinning up */
-	WAIT_WORSTCASE	= 30 * HZ,	/* 30s */
-	/* maximum wait for an IRQ to happen */
-	WAIT_CMD	= 10 * HZ,	/* 10s */
-	/* Some drives require a longer IRQ timeout. */
-	WAIT_FLOPPY_CMD	= 50 * HZ,	/* 50s */
-	/*
-	 * Some drives (for example, Seagate STT3401A Travan) require a very
-	 * long timeout, because they don't return an interrupt or clear their
-	 * BSY bit until after the command completes (even retension commands).
-	 */
-	WAIT_TAPE_CMD	= 900 * HZ,	/* 900s */
-	/* minimum sleep time */
-	WAIT_MIN_SLEEP	= HZ / 50,	/* 20ms */
-};
-
-/*
- * Op codes for special requests to be handled by ide_special_rq().
- * Values should be in the range of 0x20 to 0x3f.
- */
-#define REQ_DRIVE_RESET		0x20
-#define REQ_DEVSET_EXEC		0x21
-#define REQ_PARK_HEADS		0x22
-#define REQ_UNPARK_HEADS	0x23
-
-/*
- * hwif_chipset_t is used to keep track of the specific hardware
- * chipset used by each IDE interface, if known.
- */
-enum {		ide_unknown,	ide_generic,	ide_pci,
-		ide_cmd640,	ide_dtc2278,	ide_ali14xx,
-		ide_qd65xx,	ide_umc8672,	ide_ht6560b,
-		ide_4drives,	ide_pmac,	ide_acorn,
-		ide_au1xxx,	ide_palm3710
-};
-
-typedef u8 hwif_chipset_t;
-
-/*
- * Structure to hold all information about the location of this port
- */
-struct ide_hw {
-	union {
-		struct ide_io_ports	io_ports;
-		unsigned long		io_ports_array[IDE_NR_PORTS];
-	};
-
-	int		irq;			/* our irq number */
-	struct device	*dev, *parent;
-	unsigned long	config;
-};
-
-static inline void ide_std_init_ports(struct ide_hw *hw,
-				      unsigned long io_addr,
-				      unsigned long ctl_addr)
-{
-	unsigned int i;
-
-	for (i = 0; i <= 7; i++)
-		hw->io_ports_array[i] = io_addr++;
-
-	hw->io_ports.ctl_addr = ctl_addr;
-}
-
-#define MAX_HWIFS	10
-
-/*
- * Now for the data we need to maintain per-drive:  ide_drive_t
- */
-
-#define ide_scsi	0x21
-#define ide_disk	0x20
-#define ide_optical	0x7
-#define ide_cdrom	0x5
-#define ide_tape	0x1
-#define ide_floppy	0x0
-
-/*
- * Special Driver Flags
- */
-enum {
-	IDE_SFLAG_SET_GEOMETRY		= BIT(0),
-	IDE_SFLAG_RECALIBRATE		= BIT(1),
-	IDE_SFLAG_SET_MULTMODE		= BIT(2),
-};
-
-/*
- * Status returned from various ide_ functions
- */
-typedef enum {
-	ide_stopped,	/* no drive operation was started */
-	ide_started,	/* a drive operation was started, handler was set */
-} ide_startstop_t;
-
-enum {
-	IDE_VALID_ERROR 		= BIT(1),
-	IDE_VALID_FEATURE		= IDE_VALID_ERROR,
-	IDE_VALID_NSECT 		= BIT(2),
-	IDE_VALID_LBAL			= BIT(3),
-	IDE_VALID_LBAM			= BIT(4),
-	IDE_VALID_LBAH			= BIT(5),
-	IDE_VALID_DEVICE		= BIT(6),
-	IDE_VALID_LBA			= IDE_VALID_LBAL |
-					  IDE_VALID_LBAM |
-					  IDE_VALID_LBAH,
-	IDE_VALID_OUT_TF		= IDE_VALID_FEATURE |
-					  IDE_VALID_NSECT |
-					  IDE_VALID_LBA,
-	IDE_VALID_IN_TF 		= IDE_VALID_NSECT |
-					  IDE_VALID_LBA,
-	IDE_VALID_OUT_HOB		= IDE_VALID_OUT_TF,
-	IDE_VALID_IN_HOB		= IDE_VALID_ERROR |
-					  IDE_VALID_NSECT |
-					  IDE_VALID_LBA,
-};
-
-enum {
-	IDE_TFLAG_LBA48			= BIT(0),
-	IDE_TFLAG_WRITE			= BIT(1),
-	IDE_TFLAG_CUSTOM_HANDLER	= BIT(2),
-	IDE_TFLAG_DMA_PIO_FALLBACK	= BIT(3),
-	/* force 16-bit I/O operations */
-	IDE_TFLAG_IO_16BIT		= BIT(4),
-	/* struct ide_cmd was allocated using kmalloc() */
-	IDE_TFLAG_DYN			= BIT(5),
-	IDE_TFLAG_FS			= BIT(6),
-	IDE_TFLAG_MULTI_PIO		= BIT(7),
-	IDE_TFLAG_SET_XFER		= BIT(8),
-};
-
-enum {
-	IDE_FTFLAG_FLAGGED		= BIT(0),
-	IDE_FTFLAG_SET_IN_FLAGS		= BIT(1),
-	IDE_FTFLAG_OUT_DATA		= BIT(2),
-	IDE_FTFLAG_IN_DATA		= BIT(3),
-};
-
-struct ide_taskfile {
-	u8	data;		/* 0: data byte (for TASKFILE ioctl) */
-	union {			/* 1: */
-		u8 error;	/*  read: error */
-		u8 feature;	/* write: feature */
-	};
-	u8	nsect;		/* 2: number of sectors */
-	u8	lbal;		/* 3: LBA low */
-	u8	lbam;		/* 4: LBA mid */
-	u8	lbah;		/* 5: LBA high */
-	u8	device;		/* 6: device select */
-	union {			/* 7: */
-		u8 status;	/*  read: status */
-		u8 command;	/* write: command */
-	};
-};
-
-struct ide_cmd {
-	struct ide_taskfile	tf;
-	struct ide_taskfile	hob;
-	struct {
-		struct {
-			u8		tf;
-			u8		hob;
-		} out, in;
-	} valid;
-
-	u16			tf_flags;
-	u8			ftf_flags;	/* for TASKFILE ioctl */
-	int			protocol;
-
-	int			sg_nents;	  /* number of sg entries */
-	int			orig_sg_nents;
-	int			sg_dma_direction; /* DMA transfer direction */
-
-	unsigned int		nbytes;
-	unsigned int		nleft;
-	unsigned int		last_xfer_len;
-
-	struct scatterlist	*cursg;
-	unsigned int		cursg_ofs;
-
-	struct request		*rq;		/* copy of request */
-};
-
-/* ATAPI packet command flags */
-enum {
-	/* set when an error is considered normal - no retry (ide-tape) */
-	PC_FLAG_ABORT			= BIT(0),
-	PC_FLAG_SUPPRESS_ERROR		= BIT(1),
-	PC_FLAG_WAIT_FOR_DSC		= BIT(2),
-	PC_FLAG_DMA_OK			= BIT(3),
-	PC_FLAG_DMA_IN_PROGRESS		= BIT(4),
-	PC_FLAG_DMA_ERROR		= BIT(5),
-	PC_FLAG_WRITING			= BIT(6),
-};
-
-#define ATAPI_WAIT_PC		(60 * HZ)
-
-struct ide_atapi_pc {
-	/* actual packet bytes */
-	u8 c[12];
-	/* incremented on each retry */
-	int retries;
-	int error;
-
-	/* bytes to transfer */
-	int req_xfer;
-
-	/* the corresponding request */
-	struct request *rq;
-
-	unsigned long flags;
-
-	/*
-	 * those are more or less driver-specific and some of them are subject
-	 * to change/removal later.
-	 */
-	unsigned long timeout;
-};
-
-struct ide_devset;
-struct ide_driver;
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
-struct ide_acpi_drive_link;
-struct ide_acpi_hwif_link;
-#endif
-
-struct ide_drive_s;
-
-struct ide_disk_ops {
-	int		(*check)(struct ide_drive_s *, const char *);
-	int		(*get_capacity)(struct ide_drive_s *);
-	void		(*unlock_native_capacity)(struct ide_drive_s *);
-	void		(*setup)(struct ide_drive_s *);
-	void		(*flush)(struct ide_drive_s *);
-	int		(*init_media)(struct ide_drive_s *, struct gendisk *);
-	int		(*set_doorlock)(struct ide_drive_s *, struct gendisk *,
-					int);
-	ide_startstop_t	(*do_request)(struct ide_drive_s *, struct request *,
-				      sector_t);
-	int		(*ioctl)(struct ide_drive_s *, struct block_device *,
-				 fmode_t, unsigned int, unsigned long);
-	int		(*compat_ioctl)(struct ide_drive_s *, struct block_device *,
-					fmode_t, unsigned int, unsigned long);
-};
-
-/* ATAPI device flags */
-enum {
-	IDE_AFLAG_DRQ_INTERRUPT		= BIT(0),
-
-	/* ide-cd */
-	/* Drive cannot eject the disc. */
-	IDE_AFLAG_NO_EJECT		= BIT(1),
-	/* Drive is a pre ATAPI 1.2 drive. */
-	IDE_AFLAG_PRE_ATAPI12		= BIT(2),
-	/* TOC addresses are in BCD. */
-	IDE_AFLAG_TOCADDR_AS_BCD	= BIT(3),
-	/* TOC track numbers are in BCD. */
-	IDE_AFLAG_TOCTRACKS_AS_BCD	= BIT(4),
-	/* Saved TOC information is current. */
-	IDE_AFLAG_TOC_VALID		= BIT(6),
-	/* We think that the drive door is locked. */
-	IDE_AFLAG_DOOR_LOCKED		= BIT(7),
-	/* SET_CD_SPEED command is unsupported. */
-	IDE_AFLAG_NO_SPEED_SELECT	= BIT(8),
-	IDE_AFLAG_VERTOS_300_SSD	= BIT(9),
-	IDE_AFLAG_VERTOS_600_ESD	= BIT(10),
-	IDE_AFLAG_SANYO_3CD		= BIT(11),
-	IDE_AFLAG_FULL_CAPS_PAGE	= BIT(12),
-	IDE_AFLAG_PLAY_AUDIO_OK		= BIT(13),
-	IDE_AFLAG_LE_SPEED_FIELDS	= BIT(14),
-
-	/* ide-floppy */
-	/* Avoid commands not supported in Clik drive */
-	IDE_AFLAG_CLIK_DRIVE		= BIT(15),
-	/* Requires BH algorithm for packets */
-	IDE_AFLAG_ZIP_DRIVE		= BIT(16),
-	/* Supports format progress report */
-	IDE_AFLAG_SRFP			= BIT(17),
-
-	/* ide-tape */
-	IDE_AFLAG_IGNORE_DSC		= BIT(18),
-	/* 0 When the tape position is unknown */
-	IDE_AFLAG_ADDRESS_VALID		= BIT(19),
-	/* Device already opened */
-	IDE_AFLAG_BUSY			= BIT(20),
-	/* Attempt to auto-detect the current user block size */
-	IDE_AFLAG_DETECT_BS		= BIT(21),
-	/* Currently on a filemark */
-	IDE_AFLAG_FILEMARK		= BIT(22),
-	/* 0 = no tape is loaded, so we don't rewind after ejecting */
-	IDE_AFLAG_MEDIUM_PRESENT	= BIT(23),
-
-	IDE_AFLAG_NO_AUTOCLOSE		= BIT(24),
-};
-
-/* device flags */
-enum {
-	/* restore settings after device reset */
-	IDE_DFLAG_KEEP_SETTINGS		= BIT(0),
-	/* device is using DMA for read/write */
-	IDE_DFLAG_USING_DMA		= BIT(1),
-	/* okay to unmask other IRQs */
-	IDE_DFLAG_UNMASK		= BIT(2),
-	/* don't attempt flushes */
-	IDE_DFLAG_NOFLUSH		= BIT(3),
-	/* DSC overlap */
-	IDE_DFLAG_DSC_OVERLAP		= BIT(4),
-	/* give potential excess bandwidth */
-	IDE_DFLAG_NICE1			= BIT(5),
-	/* device is physically present */
-	IDE_DFLAG_PRESENT		= BIT(6),
-	/* disable Host Protected Area */
-	IDE_DFLAG_NOHPA			= BIT(7),
-	/* id read from device (synthetic if not set) */
-	IDE_DFLAG_ID_READ		= BIT(8),
-	IDE_DFLAG_NOPROBE		= BIT(9),
-	/* need to do check_media_change() */
-	IDE_DFLAG_REMOVABLE		= BIT(10),
-	IDE_DFLAG_FORCED_GEOM		= BIT(12),
-	/* disallow setting unmask bit */
-	IDE_DFLAG_NO_UNMASK		= BIT(13),
-	/* disallow enabling 32-bit I/O */
-	IDE_DFLAG_NO_IO_32BIT		= BIT(14),
-	/* for removable only: door lock/unlock works */
-	IDE_DFLAG_DOORLOCKING		= BIT(15),
-	/* disallow DMA */
-	IDE_DFLAG_NODMA			= BIT(16),
-	/* powermanagement told us not to do anything, so sleep nicely */
-	IDE_DFLAG_BLOCKED		= BIT(17),
-	/* sleeping & sleep field valid */
-	IDE_DFLAG_SLEEPING		= BIT(18),
-	IDE_DFLAG_POST_RESET		= BIT(19),
-	IDE_DFLAG_UDMA33_WARNED		= BIT(20),
-	IDE_DFLAG_LBA48			= BIT(21),
-	/* status of write cache */
-	IDE_DFLAG_WCACHE		= BIT(22),
-	/* used for ignoring ATA_DF */
-	IDE_DFLAG_NOWERR		= BIT(23),
-	/* retrying in PIO */
-	IDE_DFLAG_DMA_PIO_RETRY		= BIT(24),
-	IDE_DFLAG_LBA			= BIT(25),
-	/* don't unload heads */
-	IDE_DFLAG_NO_UNLOAD		= BIT(26),
-	/* heads unloaded, please don't reset port */
-	IDE_DFLAG_PARKED		= BIT(27),
-	IDE_DFLAG_MEDIA_CHANGED		= BIT(28),
-	/* write protect */
-	IDE_DFLAG_WP			= BIT(29),
-	IDE_DFLAG_FORMAT_IN_PROGRESS	= BIT(30),
-	IDE_DFLAG_NIEN_QUIRK		= BIT(31),
-};
-
-struct ide_drive_s {
-	char		name[4];	/* drive name, such as "hda" */
-        char            driver_req[10];	/* requests specific driver */
-
-	struct request_queue	*queue;	/* request queue */
-
-	bool (*prep_rq)(struct ide_drive_s *, struct request *);
-
-	struct blk_mq_tag_set	tag_set;
-
-	struct request		*rq;	/* current request */
-	void		*driver_data;	/* extra driver data */
-	u16			*id;	/* identification info */
-#ifdef CONFIG_IDE_PROC_FS
-	struct proc_dir_entry *proc;	/* /proc/ide/ directory entry */
-	const struct ide_proc_devset *settings; /* /proc/ide/ drive settings */
-#endif
-	struct hwif_s		*hwif;	/* actually (ide_hwif_t *) */
-
-	const struct ide_disk_ops *disk_ops;
-
-	unsigned long dev_flags;
-
-	unsigned long sleep;		/* sleep until this time */
-	unsigned long timeout;		/* max time to wait for irq */
-
-	u8	special_flags;		/* special action flags */
-
-	u8	select;			/* basic drive/head select reg value */
-	u8	retry_pio;		/* retrying dma capable host in pio */
-	u8	waiting_for_dma;	/* dma currently in progress */
-	u8	dma;			/* atapi dma flag */
-
-        u8	init_speed;	/* transfer rate set at boot */
-        u8	current_speed;	/* current transfer rate set */
-	u8	desired_speed;	/* desired transfer rate set */
-	u8	pio_mode;	/* for ->set_pio_mode _only_ */
-	u8	dma_mode;	/* for ->set_dma_mode _only_ */
-	u8	dn;		/* now wide spread use */
-	u8	acoustic;	/* acoustic management */
-	u8	media;		/* disk, cdrom, tape, floppy, ... */
-	u8	ready_stat;	/* min status value for drive ready */
-	u8	mult_count;	/* current multiple sector setting */
-	u8	mult_req;	/* requested multiple sector setting */
-	u8	io_32bit;	/* 0=16-bit, 1=32-bit, 2/3=32bit+sync */
-	u8	bad_wstat;	/* used for ignoring ATA_DF */
-	u8	head;		/* "real" number of heads */
-	u8	sect;		/* "real" sectors per track */
-	u8	bios_head;	/* BIOS/fdisk/LILO number of heads */
-	u8	bios_sect;	/* BIOS/fdisk/LILO sectors per track */
-
-	/* delay this long before sending packet command */
-	u8 pc_delay;
-
-	unsigned int	bios_cyl;	/* BIOS/fdisk/LILO number of cyls */
-	unsigned int	cyl;		/* "real" number of cyls */
-	void		*drive_data;	/* used by set_pio_mode/dev_select() */
-	unsigned int	failures;	/* current failure count */
-	unsigned int	max_failures;	/* maximum allowed failure count */
-	u64		probed_capacity;/* initial/native media capacity */
-	u64		capacity64;	/* total number of sectors */
-
-	int		lun;		/* logical unit */
-	int		crc_count;	/* crc counter to reduce drive speed */
-
-	unsigned long	debug_mask;	/* debugging levels switch */
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
-	struct ide_acpi_drive_link *acpidata;
-#endif
-	struct list_head list;
-	struct device	gendev;
-	struct completion gendev_rel_comp;	/* to deal with device release() */
-
-	/* current packet command */
-	struct ide_atapi_pc *pc;
-
-	/* last failed packet command */
-	struct ide_atapi_pc *failed_pc;
-
-	/* callback for packet commands */
-	int  (*pc_callback)(struct ide_drive_s *, int);
-
-	ide_startstop_t (*irq_handler)(struct ide_drive_s *);
-
-	unsigned long atapi_flags;
-
-	struct ide_atapi_pc request_sense_pc;
-
-	/* current sense rq and buffer */
-	bool sense_rq_armed;
-	bool sense_rq_active;
-	struct request *sense_rq;
-	struct request_sense sense_data;
-
-	/* async sense insertion */
-	struct work_struct rq_work;
-	struct list_head rq_list;
-};
-
-typedef struct ide_drive_s ide_drive_t;
-
-#define to_ide_device(dev)		container_of(dev, ide_drive_t, gendev)
-
-#define to_ide_drv(obj, cont_type)	\
-	container_of(obj, struct cont_type, dev)
-
-#define ide_drv_g(disk, cont_type)	\
-	container_of((disk)->private_data, struct cont_type, driver)
-
-struct ide_port_info;
-
-struct ide_tp_ops {
-	void	(*exec_command)(struct hwif_s *, u8);
-	u8	(*read_status)(struct hwif_s *);
-	u8	(*read_altstatus)(struct hwif_s *);
-	void	(*write_devctl)(struct hwif_s *, u8);
-
-	void	(*dev_select)(ide_drive_t *);
-	void	(*tf_load)(ide_drive_t *, struct ide_taskfile *, u8);
-	void	(*tf_read)(ide_drive_t *, struct ide_taskfile *, u8);
-
-	void	(*input_data)(ide_drive_t *, struct ide_cmd *,
-			      void *, unsigned int);
-	void	(*output_data)(ide_drive_t *, struct ide_cmd *,
-			       void *, unsigned int);
-};
-
-extern const struct ide_tp_ops default_tp_ops;
-
-/**
- * struct ide_port_ops - IDE port operations
- *
- * @init_dev:		host specific initialization of a device
- * @set_pio_mode:	routine to program host for PIO mode
- * @set_dma_mode:	routine to program host for DMA mode
- * @reset_poll:		chipset polling based on hba specifics
- * @pre_reset:		chipset specific changes to default for device-hba resets
- * @resetproc:		routine to reset controller after a disk reset
- * @maskproc:		special host masking for drive selection
- * @quirkproc:		check host's drive quirk list
- * @clear_irq:		clear IRQ
- *
- * @mdma_filter:	filter MDMA modes
- * @udma_filter:	filter UDMA modes
- *
- * @cable_detect:	detect cable type
- */
-struct ide_port_ops {
-	void	(*init_dev)(ide_drive_t *);
-	void	(*set_pio_mode)(struct hwif_s *, ide_drive_t *);
-	void	(*set_dma_mode)(struct hwif_s *, ide_drive_t *);
-	blk_status_t (*reset_poll)(ide_drive_t *);
-	void	(*pre_reset)(ide_drive_t *);
-	void	(*resetproc)(ide_drive_t *);
-	void	(*maskproc)(ide_drive_t *, int);
-	void	(*quirkproc)(ide_drive_t *);
-	void	(*clear_irq)(ide_drive_t *);
-	int	(*test_irq)(struct hwif_s *);
-
-	u8	(*mdma_filter)(ide_drive_t *);
-	u8	(*udma_filter)(ide_drive_t *);
-
-	u8	(*cable_detect)(struct hwif_s *);
-};
-
-struct ide_dma_ops {
-	void	(*dma_host_set)(struct ide_drive_s *, int);
-	int	(*dma_setup)(struct ide_drive_s *, struct ide_cmd *);
-	void	(*dma_start)(struct ide_drive_s *);
-	int	(*dma_end)(struct ide_drive_s *);
-	int	(*dma_test_irq)(struct ide_drive_s *);
-	void	(*dma_lost_irq)(struct ide_drive_s *);
-	/* below ones are optional */
-	int	(*dma_check)(struct ide_drive_s *, struct ide_cmd *);
-	int	(*dma_timer_expiry)(struct ide_drive_s *);
-	void	(*dma_clear)(struct ide_drive_s *);
-	/*
-	 * The following method is optional and only required to be
-	 * implemented for the SFF-8038i compatible controllers.
-	 */
-	u8	(*dma_sff_read_status)(struct hwif_s *);
-};
-
-enum {
-	IDE_PFLAG_PROBING		= BIT(0),
-};
-
-struct ide_host;
-
-typedef struct hwif_s {
-	struct hwif_s *mate;		/* other hwif from same PCI chip */
-	struct proc_dir_entry *proc;	/* /proc/ide/ directory entry */
-
-	struct ide_host *host;
-
-	char name[6];			/* name of interface, eg. "ide0" */
-
-	struct ide_io_ports	io_ports;
-
-	unsigned long	sata_scr[SATA_NR_PORTS];
-
-	ide_drive_t	*devices[MAX_DRIVES + 1];
-
-	unsigned long	port_flags;
-
-	u8 major;	/* our major number */
-	u8 index;	/* 0 for ide0; 1 for ide1; ... */
-	u8 channel;	/* for dual-port chips: 0=primary, 1=secondary */
-
-	u32 host_flags;
-
-	u8 pio_mask;
-
-	u8 ultra_mask;
-	u8 mwdma_mask;
-	u8 swdma_mask;
-
-	u8 cbl;		/* cable type */
-
-	hwif_chipset_t chipset;	/* sub-module for tuning.. */
-
-	struct device *dev;
-
-	void (*rw_disk)(ide_drive_t *, struct request *);
-
-	const struct ide_tp_ops		*tp_ops;
-	const struct ide_port_ops	*port_ops;
-	const struct ide_dma_ops	*dma_ops;
-
-	/* dma physical region descriptor table (cpu view) */
-	unsigned int	*dmatable_cpu;
-	/* dma physical region descriptor table (dma view) */
-	dma_addr_t	dmatable_dma;
-
-	/* maximum number of PRD table entries */
-	int prd_max_nents;
-	/* PRD entry size in bytes */
-	int prd_ent_size;
-
-	/* Scatter-gather list used to build the above */
-	struct scatterlist *sg_table;
-	int sg_max_nents;		/* Maximum number of entries in it */
-
-	struct ide_cmd cmd;		/* current command */
-
-	int		rqsize;		/* max sectors per request */
-	int		irq;		/* our irq number */
-
-	unsigned long	dma_base;	/* base addr for dma ports */
-
-	unsigned long	config_data;	/* for use by chipset-specific code */
-	unsigned long	select_data;	/* for use by chipset-specific code */
-
-	unsigned long	extra_base;	/* extra addr for dma ports */
-	unsigned	extra_ports;	/* number of extra dma ports */
-
-	unsigned	present    : 1;	/* this interface exists */
-	unsigned	busy	   : 1; /* serializes devices on a port */
-
-	struct device		gendev;
-	struct device		*portdev;
-
-	struct completion gendev_rel_comp; /* To deal with device release() */
-
-	void		*hwif_data;	/* extra hwif data */
-
-#ifdef CONFIG_BLK_DEV_IDEACPI
-	struct ide_acpi_hwif_link *acpidata;
-#endif
-
-	/* IRQ handler, if active */
-	ide_startstop_t	(*handler)(ide_drive_t *);
-
-	/* BOOL: polling active & poll_timeout field valid */
-	unsigned int polling : 1;
-
-	/* current drive */
-	ide_drive_t *cur_dev;
-
-	/* current request */
-	struct request *rq;
-
-	/* failsafe timer */
-	struct timer_list timer;
-	/* timeout value during long polls */
-	unsigned long poll_timeout;
-	/* queried upon timeouts */
-	int (*expiry)(ide_drive_t *);
-
-	int req_gen;
-	int req_gen_timer;
-
-	spinlock_t lock;
-} ____cacheline_internodealigned_in_smp ide_hwif_t;
-
-#define MAX_HOST_PORTS 4
-
-struct ide_host {
-	ide_hwif_t	*ports[MAX_HOST_PORTS + 1];
-	unsigned int	n_ports;
-	struct device	*dev[2];
-
-	int		(*init_chipset)(struct pci_dev *);
-
-	void		(*get_lock)(irq_handler_t, void *);
-	void		(*release_lock)(void);
-
-	irq_handler_t	irq_handler;
-
-	unsigned long	host_flags;
-
-	int		irq_flags;
-
-	void		*host_priv;
-	ide_hwif_t	*cur_port;	/* for hosts requiring serialization */
-
-	/* used for hosts requiring serialization */
-	volatile unsigned long	host_busy;
-};
-
-#define IDE_HOST_BUSY 0
-
-/*
- *  internal ide interrupt handler type
- */
-typedef ide_startstop_t (ide_handler_t)(ide_drive_t *);
-typedef int (ide_expiry_t)(ide_drive_t *);
-
-/* used by ide-cd, ide-floppy, etc. */
-typedef void (xfer_func_t)(ide_drive_t *, struct ide_cmd *, void *, unsigned);
-
-extern struct mutex ide_setting_mtx;
-
-/*
- * configurable drive settings
- */
-
-#define DS_SYNC	BIT(0)
-
-struct ide_devset {
-	int		(*get)(ide_drive_t *);
-	int		(*set)(ide_drive_t *, int);
-	unsigned int	flags;
-};
-
-#define __DEVSET(_flags, _get, _set) { \
-	.flags	= _flags, \
-	.get	= _get,	\
-	.set	= _set,	\
-}
-
-#define ide_devset_get(name, field) \
-static int get_##name(ide_drive_t *drive) \
-{ \
-	return drive->field; \
-}
-
-#define ide_devset_set(name, field) \
-static int set_##name(ide_drive_t *drive, int arg) \
-{ \
-	drive->field = arg; \
-	return 0; \
-}
-
-#define ide_devset_get_flag(name, flag) \
-static int get_##name(ide_drive_t *drive) \
-{ \
-	return !!(drive->dev_flags & flag); \
-}
-
-#define ide_devset_set_flag(name, flag) \
-static int set_##name(ide_drive_t *drive, int arg) \
-{ \
-	if (arg) \
-		drive->dev_flags |= flag; \
-	else \
-		drive->dev_flags &= ~flag; \
-	return 0; \
-}
-
-#define __IDE_DEVSET(_name, _flags, _get, _set) \
-const struct ide_devset ide_devset_##_name = \
-	__DEVSET(_flags, _get, _set)
-
-#define IDE_DEVSET(_name, _flags, _get, _set) \
-static __IDE_DEVSET(_name, _flags, _get, _set)
-
-#define ide_devset_rw(_name, _func) \
-IDE_DEVSET(_name, 0, get_##_func, set_##_func)
-
-#define ide_devset_w(_name, _func) \
-IDE_DEVSET(_name, 0, NULL, set_##_func)
-
-#define ide_ext_devset_rw(_name, _func) \
-__IDE_DEVSET(_name, 0, get_##_func, set_##_func)
-
-#define ide_ext_devset_rw_sync(_name, _func) \
-__IDE_DEVSET(_name, DS_SYNC, get_##_func, set_##_func)
-
-#define ide_decl_devset(_name) \
-extern const struct ide_devset ide_devset_##_name
-
-ide_decl_devset(io_32bit);
-ide_decl_devset(keepsettings);
-ide_decl_devset(pio_mode);
-ide_decl_devset(unmaskirq);
-ide_decl_devset(using_dma);
-
-#ifdef CONFIG_IDE_PROC_FS
-/*
- * /proc/ide interface
- */
-
-#define ide_devset_rw_field(_name, _field) \
-ide_devset_get(_name, _field); \
-ide_devset_set(_name, _field); \
-IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
-
-#define ide_devset_ro_field(_name, _field) \
-ide_devset_get(_name, _field); \
-IDE_DEVSET(_name, 0, get_##_name, NULL)
-
-#define ide_devset_rw_flag(_name, _field) \
-ide_devset_get_flag(_name, _field); \
-ide_devset_set_flag(_name, _field); \
-IDE_DEVSET(_name, DS_SYNC, get_##_name, set_##_name)
-
-struct ide_proc_devset {
-	const char		*name;
-	const struct ide_devset	*setting;
-	int			min, max;
-	int			(*mulf)(ide_drive_t *);
-	int			(*divf)(ide_drive_t *);
-};
-
-#define __IDE_PROC_DEVSET(_name, _min, _max, _mulf, _divf) { \
-	.name = __stringify(_name), \
-	.setting = &ide_devset_##_name, \
-	.min = _min, \
-	.max = _max, \
-	.mulf = _mulf, \
-	.divf = _divf, \
-}
-
-#define IDE_PROC_DEVSET(_name, _min, _max) \
-__IDE_PROC_DEVSET(_name, _min, _max, NULL, NULL)
-
-typedef struct {
-	const char	*name;
-	umode_t		mode;
-	int (*show)(struct seq_file *, void *);
-} ide_proc_entry_t;
-
-void proc_ide_create(void);
-void proc_ide_destroy(void);
-void ide_proc_register_port(ide_hwif_t *);
-void ide_proc_port_register_devices(ide_hwif_t *);
-void ide_proc_unregister_device(ide_drive_t *);
-void ide_proc_unregister_port(ide_hwif_t *);
-void ide_proc_register_driver(ide_drive_t *, struct ide_driver *);
-void ide_proc_unregister_driver(ide_drive_t *, struct ide_driver *);
-
-int ide_capacity_proc_show(struct seq_file *m, void *v);
-int ide_geometry_proc_show(struct seq_file *m, void *v);
-#else
-static inline void proc_ide_create(void) { ; }
-static inline void proc_ide_destroy(void) { ; }
-static inline void ide_proc_register_port(ide_hwif_t *hwif) { ; }
-static inline void ide_proc_port_register_devices(ide_hwif_t *hwif) { ; }
-static inline void ide_proc_unregister_device(ide_drive_t *drive) { ; }
-static inline void ide_proc_unregister_port(ide_hwif_t *hwif) { ; }
-static inline void ide_proc_register_driver(ide_drive_t *drive,
-					    struct ide_driver *driver) { ; }
-static inline void ide_proc_unregister_driver(ide_drive_t *drive,
-					      struct ide_driver *driver) { ; }
-#endif
-
-enum {
-	/* enter/exit functions */
-	IDE_DBG_FUNC =			BIT(0),
-	/* sense key/asc handling */
-	IDE_DBG_SENSE =			BIT(1),
-	/* packet commands handling */
-	IDE_DBG_PC =			BIT(2),
-	/* request handling */
-	IDE_DBG_RQ =			BIT(3),
-	/* driver probing/setup */
-	IDE_DBG_PROBE =			BIT(4),
-};
-
-/* DRV_NAME has to be defined in the driver before using the macro below */
-#define __ide_debug_log(lvl, fmt, args...)				\
-{									\
-	if (unlikely(drive->debug_mask & lvl))				\
-		printk(KERN_INFO DRV_NAME ": %s: " fmt "\n",		\
-					  __func__, ## args);		\
-}
-
-/*
- * Power Management state machine (rq->pm->pm_step).
- *
- * For each step, the core calls ide_start_power_step() first.
- * This can return:
- *	- ide_stopped :	In this case, the core calls us back again unless
- *			step have been set to ide_power_state_completed.
- *	- ide_started :	In this case, the channel is left busy until an
- *			async event (interrupt) occurs.
- * Typically, ide_start_power_step() will issue a taskfile request with
- * do_rw_taskfile().
- *
- * Upon reception of the interrupt, the core will call ide_complete_power_step()
- * with the error code if any. This routine should update the step value
- * and return. It should not start a new request. The core will call
- * ide_start_power_step() for the new step value, unless step have been
- * set to IDE_PM_COMPLETED.
- */
-enum {
-	IDE_PM_START_SUSPEND,
-	IDE_PM_FLUSH_CACHE	= IDE_PM_START_SUSPEND,
-	IDE_PM_STANDBY,
-
-	IDE_PM_START_RESUME,
-	IDE_PM_RESTORE_PIO	= IDE_PM_START_RESUME,
-	IDE_PM_IDLE,
-	IDE_PM_RESTORE_DMA,
-
-	IDE_PM_COMPLETED,
-};
-
-int generic_ide_suspend(struct device *, pm_message_t);
-int generic_ide_resume(struct device *);
-