Merge tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull more RISC-V updates from Paul Walmsley:

 - Support for the RISC-V-standardized RPMI interface.

   RPMI is a platform management communication mechanism between OSes
   running on application processors, and a remote platform management
   processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
   mailbox, and clk changes.

 - Support for the RISC-V-standardized MPXY SBI extension.

   MPXY is a RISC-V-specific standard implementing a shared memory
   mailbox between S-mode operating systems (e.g., Linux) and M-mode
   firmware (e.g., OpenSBI). It is part of this PR since one of its use
   cases is to enable M-mode firmware to act as a single RPMI client for
   all RPMI activity on a core (including S-mode RPMI activity).
   Includes a mailbox driver.

 - Some ACPI-related updates to enable the use of RPMI and MPXY.

 - The addition of Linux-wide memcpy_{from,to}_le32() static inline
   functions, for RPMI use.

 - An ACPI Kconfig change to enable boot logos on any ACPI-using
   architecture (including RISC-V)

 - A RISC-V defconfig change to add GPIO keyboard and event device
   support, for front panel shutdown or reboot buttons

* tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (26 commits)
  clk: COMMON_CLK_RPMI should depend on RISCV
  ACPI: support BGRT table on RISC-V
  MAINTAINERS: Add entry for RISC-V RPMI and MPXY drivers
  RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
  irqchip/riscv-rpmi-sysmsi: Add ACPI support
  mailbox/riscv-sbi-mpxy: Add ACPI support
  irqchip/irq-riscv-imsic-early: Export imsic_acpi_get_fwnode()
  ACPI: RISC-V: Add RPMI System MSI to GSI mapping
  ACPI: RISC-V: Add support to update gsi range
  ACPI: RISC-V: Create interrupt controller list in sorted order
  ACPI: scan: Update honor list for RPMI System MSI
  ACPI: Add support for nargs_prop in acpi_fwnode_get_reference_args()
  ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop
  irqchip: Add driver for the RPMI system MSI service group
  dt-bindings: Add RPMI system MSI interrupt controller bindings
  dt-bindings: Add RPMI system MSI message proxy bindings
  clk: Add clock driver for the RISC-V RPMI clock service group
  dt-bindings: clock: Add RPMI clock service controller bindings
  dt-bindings: clock: Add RPMI clock service message proxy bindings
  mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver
  ...

16 files changed, 2190 insertions, 84 deletions

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 2cdbd08b30e4..ca00a5dbcf75 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -461,7 +461,7 @@ config ACPI_HED
 
 config ACPI_BGRT
 	bool "Boottime Graphics Resource Table support"
-	depends on EFI && (X86 || ARM64 || LOONGARCH)
+	depends on EFI
 	help
 	  This driver adds support for exposing the ACPI Boottime Graphics
 	  Resource Table, which allows the operating system to obtain
diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c
index 54baa23a9e5a..b261dbb16230 100644
--- a/drivers/acpi/property.c
+++ b/drivers/acpi/property.c
@@ -844,13 +844,35 @@ acpi_fwnode_get_named_child_node(const struct fwnode_handle *fwnode,
 	return NULL;
 }
 
+static unsigned int acpi_fwnode_get_args_count(struct fwnode_handle *fwnode,
+					       const char *nargs_prop)
+{
+	const struct acpi_device_data *data;
+	const union acpi_object *obj;
+	int ret;
+
+	data = acpi_device_data_of_node(fwnode);
+	if (!data)
+		return 0;
+
+	ret = acpi_data_get_property(data, nargs_prop, ACPI_TYPE_INTEGER, &obj);
+	if (ret)
+		return 0;
+
+	return obj->integer.value;
+}
+
 static int acpi_get_ref_args(struct fwnode_reference_args *args,
 			     struct fwnode_handle *ref_fwnode,
+			     const char *nargs_prop,
 			     const union acpi_object **element,
 			     const union acpi_object *end, size_t num_args)
 {
 	u32 nargs = 0, i;
 
+	if (nargs_prop)
+		num_args = acpi_fwnode_get_args_count(ref_fwnode, nargs_prop);
+
 	/*
 	 * Assume the following integer elements are all args. Stop counting on
 	 * the first reference (possibly represented as a string) or end of the
@@ -922,45 +944,10 @@ static struct fwnode_handle *acpi_parse_string_ref(const struct fwnode_handle *f
 	return &dn->fwnode;
 }
 
-/**
- * __acpi_node_get_property_reference - returns handle to the referenced object
- * @fwnode: Firmware node to get the property from
- * @propname: Name of the property
- * @index: Index of the reference to return
- * @num_args: Maximum number of arguments after each reference
- * @args: Location to store the returned reference with optional arguments
- *	  (may be NULL)
- *
- * Find property with @name, verifify that it is a package containing at least
- * one object reference and if so, store the ACPI device object pointer to the
- * target object in @args->adev.  If the reference includes arguments, store
- * them in the @args->args[] array.
- *
- * If there's more than one reference in the property value package, @index is
- * used to select the one to return.
- *
- * It is possible to leave holes in the property value set like in the
- * example below:
- *
- * Package () {
- *     "cs-gpios",
- *     Package () {
- *        ^GPIO, 19, 0, 0,
- *        ^GPIO, 20, 0, 0,
- *        0,
- *        ^GPIO, 21, 0, 0,
- *     }
- * }
- *
- * Calling this function with index %2 or index %3 return %-ENOENT. If the
- * property does not contain any more values %-ENOENT is returned. The NULL
- * entry must be single integer and preferably contain value %0.
- *
- * Return: %0 on success, negative error code on failure.
- */
-int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode,
-	const char *propname, size_t index, size_t num_args,
-	struct fwnode_reference_args *args)
+static int acpi_fwnode_get_reference_args(const struct fwnode_handle *fwnode,
+					  const char *propname, const char *nargs_prop,
+					  unsigned int args_count, unsigned int index,
+					  struct fwnode_reference_args *args)
 {
 	const union acpi_object *element, *end;
 	const union acpi_object *obj;
@@ -1036,10 +1023,10 @@ int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode,
 				return -EINVAL;
 
 			element++;
-
 			ret = acpi_get_ref_args(idx == index ? args : NULL,
 						acpi_fwnode_handle(device),
-						&element, end, num_args);
+						nargs_prop, &element, end,
+						args_count);
 			if (ret < 0)
 				return ret;
 
@@ -1054,10 +1041,9 @@ int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode,
 				return -EINVAL;
 
 			element++;
-
 			ret = acpi_get_ref_args(idx == index ? args : NULL,
-						ref_fwnode, &element, end,
-						num_args);
+						ref_fwnode, nargs_prop, &element, end,
+						args_count);
 			if (ret < 0)
 				return ret;
 
@@ -1079,6 +1065,50 @@ int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode,
 
 	return -ENOENT;
 }
+
+/**
+ * __acpi_node_get_property_reference - returns handle to the referenced object
+ * @fwnode: Firmware node to get the property from
+ * @propname: Name of the property
+ * @index: Index of the reference to return
+ * @num_args: Maximum number of arguments after each reference
+ * @args: Location to store the returned reference with optional arguments
+ *	  (may be NULL)
+ *
+ * Find property with @name, verifify that it is a package containing at least
+ * one object reference and if so, store the ACPI device object pointer to the
+ * target object in @args->adev.  If the reference includes arguments, store
+ * them in the @args->args[] array.
+ *
+ * If there's more than one reference in the property value package, @index is
+ * used to select the one to return.
+ *
+ * It is possible to leave holes in the property value set like in the
+ * example below:
+ *
+ * Package () {
+ *     "cs-gpios",
+ *     Package () {
+ *        ^GPIO, 19, 0, 0,
+ *        ^GPIO, 20, 0, 0,
+ *        0,
+ *        ^GPIO, 21, 0, 0,
+ *     }
+ * }
+ *
+ * Calling this function with index %2 or index %3 return %-ENOENT. If the
+ * property does not contain any more values %-ENOENT is returned. The NULL
+ * entry must be single integer and preferably contain value %0.
+ *
+ * Return: %0 on success, negative error code on failure.
+ */
+int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode,
+				       const char *propname, size_t index,
+				       size_t num_args,
+				       struct fwnode_reference_args *args)
+{
+	return acpi_fwnode_get_reference_args(fwnode, propname, NULL, index, num_args, args);
+}
 EXPORT_SYMBOL_GPL(__acpi_node_get_property_reference);
 
 static int acpi_data_prop_read_single(const struct acpi_device_data *data,
@@ -1598,16 +1628,6 @@ acpi_fwnode_property_read_string_array(const struct fwnode_handle *fwnode,
 				   val, nval);
 }
 
-static int
-acpi_fwnode_get_reference_args(const struct fwnode_handle *fwnode,
-			       const char *prop, const char *nargs_prop,
-			       unsigned int args_count, unsigned int index,
-			       struct fwnode_reference_args *args)
-{
-	return __acpi_node_get_property_reference(fwnode, prop, index,
-						  args_count, args);
-}
-
 static const char *acpi_fwnode_get_name(const struct fwnode_handle *fwnode)
 {
 	const struct acpi_device *adev;
diff --git a/drivers/acpi/riscv/irq.c b/drivers/acpi/riscv/irq.c
index cced960c2aef..d9a2154d6c6a 100644
--- a/drivers/acpi/riscv/irq.c
+++ b/drivers/acpi/riscv/irq.c
@@ -10,6 +10,8 @@
 
 #include "init.h"
 
+#define RISCV_ACPI_INTC_FLAG_PENDING BIT(0)
+
 struct riscv_ext_intc_list {
 	acpi_handle		handle;
 	u32			gsi_base;
@@ -17,6 +19,7 @@ struct riscv_ext_intc_list {
 	u32			nr_idcs;
 	u32			id;
 	u32			type;
+	u32			flag;
 	struct list_head	list;
 };
 
@@ -69,6 +72,22 @@ static acpi_status riscv_acpi_update_gsi_handle(u32 gsi_base, acpi_handle handle
 	return AE_NOT_FOUND;
 }
 
+int riscv_acpi_update_gsi_range(u32 gsi_base, u32 nr_irqs)
+{
+	struct riscv_ext_intc_list *ext_intc_element;
+
+	list_for_each_entry(ext_intc_element, &ext_intc_list, list) {
+		if (gsi_base == ext_intc_element->gsi_base &&
+		    (ext_intc_element->flag & RISCV_ACPI_INTC_FLAG_PENDING)) {
+			ext_intc_element->nr_irqs = nr_irqs;
+			ext_intc_element->flag &= ~RISCV_ACPI_INTC_FLAG_PENDING;
+			return 0;
+		}
+	}
+
+	return -ENODEV;
+}
+
 int riscv_acpi_get_gsi_info(struct fwnode_handle *fwnode, u32 *gsi_base,
 			    u32 *id, u32 *nr_irqs, u32 *nr_idcs)
 {
@@ -115,20 +134,67 @@ struct fwnode_handle *riscv_acpi_get_gsi_domain_id(u32 gsi)
 static int __init riscv_acpi_register_ext_intc(u32 gsi_base, u32 nr_irqs, u32 nr_idcs,
 					       u32 id, u32 type)
 {
-	struct riscv_ext_intc_list *ext_intc_element;
+	struct riscv_ext_intc_list *ext_intc_element, *node, *prev;
 
 	ext_intc_element = kzalloc(sizeof(*ext_intc_element), GFP_KERNEL);
 	if (!ext_intc_element)
 		return -ENOMEM;
 
 	ext_intc_element->gsi_base = gsi_base;
-	ext_intc_element->nr_irqs = nr_irqs;
+
+	/* If nr_irqs is zero, indicate it in flag and set to max range possible */
+	if (nr_irqs) {
+		ext_intc_element->nr_irqs = nr_irqs;
+	} else {
+		ext_intc_element->flag |= RISCV_ACPI_INTC_FLAG_PENDING;
+		ext_intc_element->nr_irqs = U32_MAX - ext_intc_element->gsi_base;
+	}
+
 	ext_intc_element->nr_idcs = nr_idcs;
 	ext_intc_element->id = id;
-	list_add_tail(&ext_intc_element->list, &ext_intc_list);
+	list_for_each_entry(node, &ext_intc_list, list) {
+		if (node->gsi_base < ext_intc_element->gsi_base)
+			break;
+	}
+
+	/* Adjust the previous node's GSI range if that has pending registration */
+	prev = list_prev_entry(node, list);
+	if (!list_entry_is_head(prev, &ext_intc_list, list)) {
+		if (prev->flag & RISCV_ACPI_INTC_FLAG_PENDING)
+			prev->nr_irqs = ext_intc_element->gsi_base - prev->gsi_base;
+	}
+
+	list_add_tail(&ext_intc_element->list, &node->list);
 	return 0;
 }
 
+static acpi_status __init riscv_acpi_create_gsi_map_smsi(acpi_handle handle, u32 level,
+							 void *context, void **return_value)
+{
+	acpi_status status;
+	u64 gbase;
+
+	if (!acpi_has_method(handle, "_GSB")) {
+		acpi_handle_err(handle, "_GSB method not found\n");
+		return AE_ERROR;
+	}
+
+	status = acpi_evaluate_integer(handle, "_GSB", NULL, &gbase);
+	if (ACPI_FAILURE(status)) {
+		acpi_handle_err(handle, "failed to evaluate _GSB method\n");
+		return status;
+	}
+
+	riscv_acpi_register_ext_intc(gbase, 0, 0, 0, ACPI_RISCV_IRQCHIP_SMSI);
+	status = riscv_acpi_update_gsi_handle((u32)gbase, handle);
+	if (ACPI_FAILURE(status)) {
+		acpi_handle_err(handle, "failed to find the GSI mapping entry\n");
+		return status;
+	}
+
+	return AE_OK;
+}
+
 static acpi_status __init riscv_acpi_create_gsi_map(acpi_handle handle, u32 level,
 						    void *context, void **return_value)
 {
@@ -183,6 +249,9 @@ void __init riscv_acpi_init_gsi_mapping(void)
 
 	if (acpi_table_parse_madt(ACPI_MADT_TYPE_APLIC, riscv_acpi_aplic_parse_madt, 0) > 0)
 		acpi_get_devices("RSCV0002", riscv_acpi_create_gsi_map, NULL, NULL);
+
+	/* Unlike PLIC/APLIC, SYSMSI doesn't have MADT */
+	acpi_get_devices("RSCV0006", riscv_acpi_create_gsi_map_smsi, NULL, NULL);
 }
 
 static acpi_handle riscv_acpi_get_gsi_handle(u32 gsi)
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 065abe56f440..ef16d58b2949 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -861,6 +861,8 @@ static const char * const acpi_honor_dep_ids[] = {
 	"INTC10CF", /* IVSC (MTL) driver must be loaded to allow i2c access to camera sensors */
 	"RSCV0001", /* RISC-V PLIC */
 	"RSCV0002", /* RISC-V APLIC */
+	"RSCV0005", /* RISC-V SBI MPXY MBOX */
+	"RSCV0006", /* RISC-V RPMI SYSMSI */
 	"PNP0C0F",  /* PCI Link Device */
 	NULL
 };
diff --git a/drivers/base/property.c b/drivers/base/property.c
index f626d5bbe806..6a63860579dd 100644
--- a/drivers/base/property.c
+++ b/drivers/base/property.c
@@ -578,7 +578,7 @@ EXPORT_SYMBOL_GPL(fwnode_property_match_property_string);
  * @prop:	The name of the property
  * @nargs_prop:	The name of the property telling the number of
  *		arguments in the referred node. NULL if @nargs is known,
- *		otherwise @nargs is ignored. Only relevant on OF.
+ *		otherwise @nargs is ignored.
  * @nargs:	Number of arguments. Ignored if @nargs_prop is non-NULL.
  * @index:	Index of the reference, from zero onwards.
  * @args:	Result structure with reference and integer arguments.
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 4d56475f94fc..6fc5ae76b483 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -501,6 +501,15 @@ config COMMON_CLK_SP7021
 	  Not all features of the PLL are currently supported
 	  by the driver.
 
+config COMMON_CLK_RPMI
+	tristate "Clock driver based on RISC-V RPMI"
+	depends on RISCV || COMPILE_TEST
+	depends on MAILBOX
+	default RISCV
+	help
+	  Support for clocks based on the clock service group defined by
+	  the RISC-V platform management interface (RPMI) specification.
+
 source "drivers/clk/actions/Kconfig"
 source "drivers/clk/analogbits/Kconfig"
 source "drivers/clk/baikal-t1/Kconfig"
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 18ed29cfdc11..b74a1767ca27 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -86,6 +86,7 @@ obj-$(CONFIG_COMMON_CLK_PWM)		+= clk-pwm.o
 obj-$(CONFIG_CLK_QORIQ)			+= clk-qoriq.o
 obj-$(CONFIG_COMMON_CLK_RK808)		+= clk-rk808.o
 obj-$(CONFIG_COMMON_CLK_RP1)            += clk-rp1.o
+obj-$(CONFIG_COMMON_CLK_RPMI)		+= clk-rpmi.o
 obj-$(CONFIG_COMMON_CLK_HI655X)		+= clk-hi655x.o
 obj-$(CONFIG_COMMON_CLK_S2MPS11)	+= clk-s2mps11.o
 obj-$(CONFIG_COMMON_CLK_SCMI)           += clk-scmi.o
diff --git a/drivers/clk/clk-rpmi.c b/drivers/clk/clk-rpmi.c
new file mode 100644
index 000000000000..921296aafa68
--- /dev/null
+++ b/drivers/clk/clk-rpmi.c
@@ -0,0 +1,620 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RISC-V MPXY Based Clock Driver
+ *
+ * Copyright (C) 2025 Ventana Micro Systems Ltd.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/mailbox_client.h>
+#include <linux/mailbox/riscv-rpmi-message.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/wordpart.h>
+
+#define RPMI_CLK_DISCRETE_MAX_NUM_RATES		16
+#define RPMI_CLK_NAME_LEN			16
+
+#define to_rpmi_clk(clk)	container_of(clk, struct rpmi_clk, hw)
+
+enum rpmi_clk_config {
+	RPMI_CLK_DISABLE = 0,
+	RPMI_CLK_ENABLE = 1,
+	RPMI_CLK_CONFIG_MAX_IDX
+};
+
+#define RPMI_CLK_TYPE_MASK			GENMASK(1, 0)
+enum rpmi_clk_type {
+	RPMI_CLK_DISCRETE = 0,
+	RPMI_CLK_LINEAR = 1,
+	RPMI_CLK_TYPE_MAX_IDX
+};
+
+struct rpmi_clk_context {
+	struct device *dev;
+	struct mbox_chan *chan;
+	struct mbox_client client;
+	u32 max_msg_data_size;
+};
+
+/*
+ * rpmi_clk_rates represents the rates format
+ * as specified by the RPMI specification.
+ * No other data format (e.g., struct linear_range)
+ * is required to avoid to and from conversion.
+ */
+union rpmi_clk_rates {
+	u64 discrete[RPMI_CLK_DISCRETE_MAX_NUM_RATES];
+	struct {
+		u64 min;
+		u64 max;
+		u64 step;
+	} linear;
+};
+
+struct rpmi_clk {
+	struct rpmi_clk_context *context;
+	u32 id;
+	u32 num_rates;
+	u32 transition_latency;
+	enum rpmi_clk_type type;
+	union rpmi_clk_rates *rates;
+	char name[RPMI_CLK_NAME_LEN];
+	struct clk_hw hw;
+};
+
+struct rpmi_clk_rate_discrete {
+	__le32 lo;
+	__le32 hi;
+};
+
+struct rpmi_clk_rate_linear {
+	__le32 min_lo;
+	__le32 min_hi;
+	__le32 max_lo;
+	__le32 max_hi;
+	__le32 step_lo;
+	__le32 step_hi;
+};
+
+struct rpmi_get_num_clocks_rx {
+	__le32 status;
+	__le32 num_clocks;
+};
+
+struct rpmi_get_attrs_tx {
+	__le32 clkid;
+};
+
+struct rpmi_get_attrs_rx {
+	__le32 status;
+	__le32 flags;
+	__le32 num_rates;
+	__le32 transition_latency;
+	char name[RPMI_CLK_NAME_LEN];
+};
+
+struct rpmi_get_supp_rates_tx {
+	__le32 clkid;
+	__le32 clk_rate_idx;
+};
+
+struct rpmi_get_supp_rates_rx {
+	__le32 status;
+	__le32 flags;
+	__le32 remaining;
+	__le32 returned;
+	__le32 rates[];
+};
+
+struct rpmi_get_rate_tx {
+	__le32 clkid;
+};
+
+struct rpmi_get_rate_rx {
+	__le32 status;
+	__le32 lo;
+	__le32 hi;
+};
+
+struct rpmi_set_rate_tx {
+	__le32 clkid;
+	__le32 flags;
+	__le32 lo;
+	__le32 hi;
+};
+
+struct rpmi_set_rate_rx {
+	__le32 status;
+};
+
+struct rpmi_set_config_tx {
+	__le32 clkid;
+	__le32 config;
+};
+
+struct rpmi_set_config_rx {
+	__le32 status;
+};
+
+static inline u64 rpmi_clkrate_u64(u32 __hi, u32 __lo)
+{
+	return (((u64)(__hi) << 32) | (u32)(__lo));
+}
+
+static u32 rpmi_clk_get_num_clocks(struct rpmi_clk_context *context)
+{
+	struct rpmi_get_num_clocks_rx rx, *resp;
+	struct rpmi_mbox_message msg;
+	int ret;
+
+	rpmi_mbox_init_send_with_response(&msg, RPMI_CLK_SRV_GET_NUM_CLOCKS,
+					  NULL, 0, &rx, sizeof(rx));
+
+	ret = rpmi_mbox_send_message(context->chan, &msg);
+	if (ret)
+		return 0;
+
+	resp = rpmi_mbox_get_msg_response(&msg);
+	if (!resp || resp->status)
+		return 0;
+
+	return le32_to_cpu(resp->num_clocks);
+}
+
+static int rpmi_clk_get_attrs(u32 clkid, struct rpmi_clk *rpmi_clk)
+{
+	struct rpmi_clk_context *context = rpmi_clk->context;
+	struct rpmi_mbox_message msg;
+	struct rpmi_get_attrs_tx tx;
+	struct rpmi_get_attrs_rx rx, *resp;
+	u8 format;
+	int ret;
+
+	tx.clkid = cpu_to_le32(clkid);
+	rpmi_mbox_init_send_with_response(&msg, RPMI_CLK_SRV_GET_ATTRIBUTES,
+					  &tx, sizeof(tx), &rx, sizeof(rx));
+
+	ret = rpmi_mbox_send_message(context->chan, &msg);
+	if (ret)
+		return ret;
+
+	resp = rpmi_mbox_get_msg_response(&msg);
+	if (!resp)
+		return -EINVAL;
+	if (resp->status)
+		return rpmi_to_linux_error(le32_to_cpu(resp->status));
+
+	rpmi_clk->id = clkid;
+	rpmi_clk->num_rates = le32_to_cpu(resp->num_rates);
+	rpmi_clk->transition_latency = le32_to_cpu(resp->transition_latency);
+	strscpy(rpmi_clk->name, resp->name, RPMI_CLK_NAME_LEN);
+
+	format = le32_to_cpu(resp->flags) & RPMI_CLK_TYPE_MASK;
+	if (format >= RPMI_CLK_TYPE_MAX_IDX)
+		return -EINVAL;
+
+	rpmi_clk->type = format;
+
+	return 0;
+}
+
+static int rpmi_clk_get_supported_rates(u32 clkid, struct rpmi_clk *rpmi_clk)
+{
+	struct rpmi_clk_context *context = rpmi_clk->context;
+	struct rpmi_clk_rate_discrete *rate_discrete;
+	struct rpmi_clk_rate_linear *rate_linear;
+	struct rpmi_get_supp_rates_tx tx;
+	struct rpmi_get_supp_rates_rx *resp;
+	struct rpmi_mbox_message msg;
+	size_t clk_rate_idx;
+	int ret, rateidx, j;
+
+	tx.clkid = cpu_to_le32(clkid);
+	tx.clk_rate_idx = 0;
+
+	/*
+	 * Make sure we allocate rx buffer sufficient to be accommodate all
+	 * the rates sent in one RPMI message.
+	 */
+	struct rpmi_get_supp_rates_rx *rx __free(kfree) =
+					kzalloc(context->max_msg_data_size, GFP_KERNEL);
+	if (!rx)
+		return -ENOMEM;
+
+	rpmi_mbox_init_send_with_response(&msg, RPMI_CLK_SRV_GET_SUPPORTED_RATES,
+					  &tx, sizeof(tx), rx, context->max_msg_data_size);
+
+	ret = rpmi_mbox_send_message(context->chan, &msg);
+	if (ret)
+		return ret;
+
+	resp = rpmi_mbox_get_msg_response(&msg);
+	if (!resp)
+		return -EINVAL;
+	if (resp->status)
+		return rpmi_to_linux_error(le32_to_cpu(resp->status));
+	if (!le32_to_cpu(resp->returned))
+		return -EINVAL;
+
+	if (rpmi_clk->type == RPMI_CLK_DISCRETE) {
+		rate_discrete = (struct rpmi_clk_rate_discrete *)resp->rates;
+
+		for (rateidx = 0; rateidx < le32_to_cpu(resp->returned); rateidx++) {
+			rpmi_clk->rates->discrete[rateidx] =
+				rpmi_clkrate_u64(le32_to_cpu(rate_discrete[rateidx].hi),
+						 le32_to_cpu(rate_discrete[rateidx].lo));
+		}
+
+		/*
+		 * Keep sending the request message until all
+		 * the rates are received.
+		 */
+		clk_rate_idx = 0;
+		while (le32_to_cpu(resp->remaining)) {
+			clk_rate_idx += le32_to_cpu(resp->returned);
+			tx.clk_rate_idx = cpu_to_le32(clk_rate_idx);
+
+			rpmi_mbox_init_send_with_response(&msg,
+							  RPMI_CLK_SRV_GET_SUPPORTED_RATES,
+							  &tx, sizeof(tx),
+							  rx, context->max_msg_data_size);
+
+			ret = rpmi_mbox_send_message(context->chan, &msg);
+			if (ret)
+				return ret;
+
+			resp = rpmi_mbox_get_msg_response(&msg);
+			if (!resp)
+				return -EINVAL;
+			if (resp->status)
+				return rpmi_to_linux_error(le32_to_cpu(resp->status));
+			if (!le32_to_cpu(resp->returned))
+				return -EINVAL;
+
+			for (j = 0; j < le32_to_cpu(resp->returned); j++) {
+				if (rateidx >= clk_rate_idx + le32_to_cpu(resp->returned))
+					break;
+				rpmi_clk->rates->discrete[rateidx++] =
+					rpmi_clkrate_u64(le32_to_cpu(rate_discrete[j].hi),
+							 le32_to_cpu(rate_discrete[j].lo));
+			}
+		}
+	} else if (rpmi_clk->type == RPMI_CLK_LINEAR) {
+		rate_linear = (struct rpmi_clk_rate_linear *)resp->rates;
+
+		rpmi_clk->rates->linear.min = rpmi_clkrate_u64(le32_to_cpu(rate_linear->min_hi),
+							       le32_to_cpu(rate_linear->min_lo));
+		rpmi_clk->rates->linear.max = rpmi_clkrate_u64(le32_to_cpu(rate_linear->max_hi),
+							       le32_to_cpu(rate_linear->max_lo));
+		rpmi_clk->rates->linear.step = rpmi_clkrate_u64(le32_to_cpu(rate_linear->step_hi),
+								le32_to_cpu(rate_linear->step_lo));
+	}
+
+	return 0;
+}
+
+static unsigned long rpmi_clk_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct rpmi_clk *rpmi_clk = to_rpmi_clk(hw);
+	struct rpmi_clk_context *context = rpmi_clk->context;
+	struct rpmi_mbox_message msg;
+	struct rpmi_get_rate_tx tx;
+	struct rpmi_get_rate_rx rx, *resp;
+	int ret;
+
+	tx.clkid = cpu_to_le32(rpmi_clk->id);
+
+	rpmi_mbox_init_send_with_response(&msg, RPMI_CLK_SRV_GET_RATE,
+					  &tx, sizeof(tx), &rx, sizeof(rx));
+
+	ret = rpmi_mbox_send_message(context->chan, &msg);
+	if (ret)
+		return ret;
+
+	resp = rpmi_mbox_get_msg_response(&msg);
+	if (!resp)
+		return -EINVAL;
+	if (resp->status)
+		return rpmi_to_linux_error(le32_to_cpu(resp->status));
+
+	return rpmi_clkrate_u64(le32_to_cpu(resp->hi), le32_to_cpu(resp->lo));
+}
+
+static int rpmi_clk_determine_rate(struct clk_hw *hw,
+				   struct clk_rate_request *req)
+{
+	struct rpmi_clk *rpmi_clk = to_rpmi_clk(hw);
+	u64 fmin, fmax, ftmp;
+
+	/*
+	 * Keep the requested rate if the clock format
+	 * is of discrete type. Let the platform which
+	 * is actually controlling the clock handle that.
+	 */
+	if (rpmi_clk->type == RPMI_CLK_DISCRETE)
+		return 0;
+
+	fmin = rpmi_clk->rates->linear.min;
+	fmax = rpmi_clk->rates->linear.max;
+
+	if (req->rate <= fmin) {
+		req->rate = fmin;
+		return 0;
+	} else if (req->rate >= fmax) {
+		req->rate = fmax;
+		return 0;
+	}
+
+	ftmp = req->rate - fmin;
+	ftmp += rpmi_clk->rates->linear.step - 1;
+	do_div(ftmp, rpmi_clk->rates->linear.step);
+
+	req->rate = ftmp * rpmi_clk->rates->linear.step + fmin;
+
+	return 0;
+}
+
+static int rpmi_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+			     unsigned long parent_rate)
+{
+	struct rpmi_clk *rpmi_clk = to_rpmi_clk(hw);
+	struct rpmi_clk_context *context = rpmi_clk->context;
+	struct rpmi_mbox_message msg;
+	struct rpmi_set_rate_tx tx;
+	struct rpmi_set_rate_rx rx, *resp;
+	int ret;
+
+	tx.clkid = cpu_to_le32(rpmi_clk->id);
+	tx.lo = cpu_to_le32(lower_32_bits(rate));
+	tx.hi = cpu_to_le32(upper_32_bits(rate));
+
+	rpmi_mbox_init_send_with_response(&msg, RPMI_CLK_SRV_SET_RATE,
+					  &tx, sizeof(tx), &rx, sizeof(rx));
+
+	ret = rpmi_mbox_send_message(context->chan, &msg);
+	if (ret)
+		return ret;
+
+	resp = rpmi_mbox_get_msg_response(&msg);
+	if (!resp)
+		return -EINVAL;
+	if (resp->status)
+		return rpmi_to_linux_error(le32_to_cpu(resp->status));
+
+	return 0;
+}
+
+static int rpmi_clk_enable(struct clk_hw *hw)
+{
+	struct rpmi_clk *rpmi_clk = to_rpmi_clk(hw);
+	struct rpmi_clk_context *context = rpmi_clk->context;
+	struct rpmi_mbox_message msg;
+	struct rpmi_set_config_tx tx;
+	struct rpmi_set_config_rx rx, *resp;
+	int ret;
+
+	tx.config = cpu_to_le32(RPMI_CLK_ENABLE);
+	tx.clkid = cpu_to_le32(rpmi_clk->id);
+
+	rpmi_mbox_init_send_with_response(&msg, RPMI_CLK_SRV_SET_CONFIG,
+					  &tx, sizeof(tx), &rx, sizeof(rx));
+
+	ret = rpmi_mbox_send_message(context->chan, &msg);
+	if (ret)
+		return ret;
+
+	resp = rpmi_mbox_get_msg_response(&msg);
+	if (!resp)
+		return -EINVAL;
+	if (resp->status)
+		return rpmi_to_linux_error(le32_to_cpu(resp->status));
+
+	return 0;
+}
+
+static void rpmi_clk_disable(struct clk_hw *hw)
+{
+	struct rpmi_clk *rpmi_clk = to_rpmi_clk(hw);
+	struct rpmi_clk_context *context = rpmi_clk->context;
+	struct rpmi_mbox_message msg;
+	struct rpmi_set_config_tx tx;
+	struct rpmi_set_config_rx rx;
+
+	tx.config = cpu_to_le32(RPMI_CLK_DISABLE);
+	tx.clkid = cpu_to_le32(rpmi_clk->id);
+
+	rpmi_mbox_init_send_with_response(&msg, RPMI_CLK_SRV_SET_CONFIG,
+					  &tx, sizeof(tx), &rx, sizeof(rx));
+
+	rpmi_mbox_send_message(context->chan, &msg);
+}
+
+static const struct clk_ops rpmi_clk_ops = {
+	.recalc_rate = rpmi_clk_recalc_rate,
+	.determine_rate = rpmi_clk_determine_rate,
+	.set_rate = rpmi_clk_set_rate,
+	.prepare = rpmi_clk_enable,
+	.unprepare = rpmi_clk_disable,
+};
+
+static struct clk_hw *rpmi_clk_enumerate(struct rpmi_clk_context *context, u32 clkid)
+{
+	struct device *dev = context->dev;
+	unsigned long min_rate, max_rate;
+	union rpmi_clk_rates *rates;
+	struct rpmi_clk *rpmi_clk;
+	struct clk_init_data init = {};
+	struct clk_hw *clk_hw;
+	int ret;
+
+	rates = devm_kzalloc(dev, sizeof(*rates), GFP_KERNEL);
+	if (!rates)
+		return ERR_PTR(-ENOMEM);
+
+	rpmi_clk = devm_kzalloc(dev, sizeof(*rpmi_clk), GFP_KERNEL);
+	if (!rpmi_clk)
+		return ERR_PTR(-ENOMEM);
+
+	rpmi_clk->context = context;
+	rpmi_clk->rates = rates;
+
+	ret = rpmi_clk_get_attrs(clkid, rpmi_clk);
+	if (ret)
+		return dev_err_ptr_probe(dev, ret,
+					 "Failed to get clk-%u attributes\n",
+					 clkid);
+
+	ret = rpmi_clk_get_supported_rates(clkid, rpmi_clk);
+	if (ret)
+		return dev_err_ptr_probe(dev, ret,
+					 "Get supported rates failed for clk-%u\n",
+					 clkid);
+
+	init.flags = CLK_GET_RATE_NOCACHE;
+	init.num_parents = 0;
+	init.ops = &rpmi_clk_ops;
+	init.name = rpmi_clk->name;
+	clk_hw = &rpmi_clk->hw;
+	clk_hw->init = &init;
+
+	ret = devm_clk_hw_register(dev, clk_hw);
+	if (ret)
+		return dev_err_ptr_probe(dev, ret,
+					 "Unable to register clk-%u\n",
+					 clkid);
+
+	if (rpmi_clk->type == RPMI_CLK_DISCRETE) {
+		min_rate = rpmi_clk->rates->discrete[0];
+		max_rate = rpmi_clk->rates->discrete[rpmi_clk->num_rates -  1];
+	} else {
+		min_rate = rpmi_clk->rates->linear.min;
+		max_rate = rpmi_clk->rates->linear.max;
+	}
+
+	clk_hw_set_rate_range(clk_hw, min_rate, max_rate);
+
+	return clk_hw;
+}
+
+static void rpmi_clk_mbox_chan_release(void *data)
+{
+	struct mbox_chan *chan = data;
+
+	mbox_free_channel(chan);
+}
+
+static int rpmi_clk_probe(struct platform_device *pdev)
+{
+	int ret;
+	unsigned int num_clocks, i;
+	struct clk_hw_onecell_data *clk_data;
+	struct rpmi_clk_context *context;
+	struct rpmi_mbox_message msg;
+	struct clk_hw *hw_ptr;
+	struct device *dev = &pdev->dev;
+
+	context = devm_kzalloc(dev, sizeof(*context), GFP_KERNEL);
+	if (!context)
+		return -ENOMEM;
+	context->dev = dev;
+	platform_set_drvdata(pdev, context);
+
+	context->client.dev		= context->dev;
+	context->client.rx_callback	= NULL;
+	context->client.tx_block	= false;
+	context->client.knows_txdone	= true;
+	context->client.tx_tout		= 0;
+
+	context->chan = mbox_request_channel(&context->client, 0);
+	if (IS_ERR(context->chan))
+		return PTR_ERR(context->chan);
+
+	ret = devm_add_action_or_reset(dev, rpmi_clk_mbox_chan_release, context->chan);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to add rpmi mbox channel cleanup\n");
+
+	rpmi_mbox_init_get_attribu