Merge tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux into clk-pile

Pull clk patches from Brian Masney:

 - New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS),
   UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree
   bindings. Si549 support was added to the existing si544 driver.
 - New clock and reset support for the Aspeed AST2700 PECI controller and Airoha
   EN7523 PCIe PERSTOUT reset lines.
 - The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to
   the existing optional variant, and exports
   devm_clk_hw_register_composite_pdata() for modular drivers.
 - Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1
   support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL
   charge pump/lock parameter programming during dynamic reconfiguration.
 - Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in
   the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted
   gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on
   registration failure, a prepare reference leak in the palmas driver,
   unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in
   pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a
   clocking-wizard clock difference detection bug.
 - Various cleanups across tegra, st, and mvebu providers to stop misusing the
   consumer clock API, along with other minor fixes and improvements.

Signed-off-by: Brian Masney <bmasney@redhat.com>

* tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits)
  clk: tegra: set up proper EMC clock implementation for Tegra114
  clk: clocking-wizard: remove 20kHz restriction
  clk: clocking-wizard: optimize clock search
  clk: clocking-wizard: fix clock difference detection
  clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
  clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
  clk: tegra: support 48MHz clock for pll_p_out1
  clk: aspeed: add AST2700 PECI clock
  dt-bindings: clock: ast2700: add PECI clock
  clk: mediatek: Add mt8173-mfgtop driver
  dt-bindings: clock: mediatek: Add mt8173 mfgtop
  clk: tegra: clean-up simple provider misuse of the consumer API
  clk: st: clean-up simple provider misuse of the consumer API
  clk: mvebu: clean-up simple provider misuse of the consumer API
  clk: remove conditional return with no effect
  clk: Add devm_clk_bulk_get_enable()
  clk: en7523: add support for dedicated PCIe PERSTOUT reset
  dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT
  arm64: dts: cix: sky1: add audss cru
  reset: cix: add sky1 audss auxiliary reset driver
  ...

3 files changed, 141 insertions, 0 deletions

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index f63e89ed6a4e..3168ab1eea88 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -311,6 +311,19 @@ config RESET_SKY1
 	help
 	  This enables the reset controller for Cix Sky1.
 
+config RESET_SKY1_AUDSS
+	tristate "Cix Sky1 Audio Subsystem reset controller"
+	depends on ARCH_CIX || COMPILE_TEST
+	select AUXILIARY_BUS
+	default CLK_SKY1_AUDSS
+	help
+	  Support for block-level software reset lines in the Cix Sky1
+	  Audio Subsystem (AUDSS) Clock and Reset Unit. Sixteen reset
+	  outputs for audio peripherals are controlled through the CRU
+	  register map. The driver binds as an auxiliary device from
+	  the AUDSS clock driver. Say M or Y here if you want to build
+	  this driver.
+
 config RESET_SOCFPGA
 	bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA)
 	default ARM && ARCH_INTEL_SOCFPGA
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index a75af831ef58..45ad17062462 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_RESET_RZV2H_USB2PHY) += reset-rzv2h-usb2phy.o
 obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
 obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
 obj-$(CONFIG_RESET_SKY1) += reset-sky1.o
+obj-$(CONFIG_RESET_SKY1_AUDSS) += reset-sky1-audss.o
 obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
diff --git a/drivers/reset/reset-sky1-audss.c b/drivers/reset/reset-sky1-audss.c
new file mode 100644
index 000000000000..d9735db681c7
--- /dev/null
+++ b/drivers/reset/reset-sky1-audss.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Cix Sky1 Audio Subsystem reset controller driver
+ *
+ * Copyright 2026 Cix Technology Group Co., Ltd.
+ */
+
+#include <dt-bindings/reset/cix,sky1-audss-cru.h>
+
+#include <linux/auxiliary_bus.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#define SKY1_RESET_SLEEP_US			50
+
+#define AUDSS_SW_RST			0x78
+
+struct sky1_audss_reset_map {
+	unsigned int offset;
+	unsigned int mask;
+};
+
+struct sky1_audss_reset {
+	struct reset_controller_dev rcdev;
+	struct regmap *regmap;
+	const struct sky1_audss_reset_map *map;
+};
+
+static const struct sky1_audss_reset_map sky1_audss_reset_map[] = {
+	[AUDSS_I2S0_SW_RST]   = { AUDSS_SW_RST, BIT(0) },
+	[AUDSS_I2S1_SW_RST]   = { AUDSS_SW_RST, BIT(1) },
+	[AUDSS_I2S2_SW_RST]   = { AUDSS_SW_RST, BIT(2) },
+	[AUDSS_I2S3_SW_RST]   = { AUDSS_SW_RST, BIT(3) },
+	[AUDSS_I2S4_SW_RST]   = { AUDSS_SW_RST, BIT(4) },
+	[AUDSS_I2S5_SW_RST]   = { AUDSS_SW_RST, BIT(5) },
+	[AUDSS_I2S6_SW_RST]   = { AUDSS_SW_RST, BIT(6) },
+	[AUDSS_I2S7_SW_RST]   = { AUDSS_SW_RST, BIT(7) },
+	[AUDSS_I2S8_SW_RST]   = { AUDSS_SW_RST, BIT(8) },
+	[AUDSS_I2S9_SW_RST]   = { AUDSS_SW_RST, BIT(9) },
+	[AUDSS_WDT_SW_RST]    = { AUDSS_SW_RST, BIT(10) },
+	[AUDSS_TIMER_SW_RST]  = { AUDSS_SW_RST, BIT(11) },
+	[AUDSS_MB0_SW_RST]    = { AUDSS_SW_RST, BIT(12) },
+	[AUDSS_MB1_SW_RST]    = { AUDSS_SW_RST, BIT(13) },
+	[AUDSS_HDA_SW_RST]    = { AUDSS_SW_RST, BIT(14) },
+	[AUDSS_DMAC_SW_RST]   = { AUDSS_SW_RST, BIT(15) },
+};
+
+static struct sky1_audss_reset *to_sky1_audss_reset(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct sky1_audss_reset, rcdev);
+}
+
+static int sky1_audss_reset_set(struct reset_controller_dev *rcdev,
+				unsigned long id, bool assert)
+{
+	struct sky1_audss_reset *priv = to_sky1_audss_reset(rcdev);
+	const struct sky1_audss_reset_map *signal = &priv->map[id];
+	int ret;
+
+	ret = regmap_assign_bits(priv->regmap, signal->offset,
+				 signal->mask, !assert);
+	if (ret)
+		return ret;
+
+	fsleep(SKY1_RESET_SLEEP_US);
+	return 0;
+}
+
+static int sky1_audss_reset_assert(struct reset_controller_dev *rcdev,
+				   unsigned long id)
+{
+	return sky1_audss_reset_set(rcdev, id, true);
+}
+
+static int sky1_audss_reset_deassert(struct reset_controller_dev *rcdev,
+				     unsigned long id)
+{
+	return sky1_audss_reset_set(rcdev, id, false);
+}
+
+static const struct reset_control_ops sky1_audss_reset_ops = {
+	.assert   = sky1_audss_reset_assert,
+	.deassert = sky1_audss_reset_deassert,
+};
+
+static int sky1_audss_reset_probe(struct auxiliary_device *adev,
+				  const struct auxiliary_device_id *id)
+{
+	struct sky1_audss_reset *priv;
+	struct device *dev = &adev->dev;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->regmap = dev_get_regmap(dev->parent, NULL);
+	if (!priv->regmap)
+		return dev_err_probe(dev, -ENODEV, "failed to get parent regmap\n");
+
+	priv->map = sky1_audss_reset_map;
+	priv->rcdev.owner = THIS_MODULE;
+	priv->rcdev.nr_resets = ARRAY_SIZE(sky1_audss_reset_map);
+	priv->rcdev.ops = &sky1_audss_reset_ops;
+	priv->rcdev.of_node = dev->of_node;
+	priv->rcdev.dev = dev;
+
+	return devm_reset_controller_register(dev, &priv->rcdev);
+}
+
+static const struct auxiliary_device_id sky1_audss_reset_ids[] = {
+	{ .name = "clk_sky1_audss.reset" },
+	{ }
+};
+MODULE_DEVICE_TABLE(auxiliary, sky1_audss_reset_ids);
+
+static struct auxiliary_driver sky1_audss_reset_driver = {
+	.probe = sky1_audss_reset_probe,
+	.id_table = sky1_audss_reset_ids,
+};
+module_auxiliary_driver(sky1_audss_reset_driver);
+
+MODULE_AUTHOR("Joakim Zhang <joakim.zhang@cixtech.com>");
+MODULE_DESCRIPTION("Cix Sky1 Audio Subsystem reset driver");
+MODULE_LICENSE("GPL");