Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
 "Lots of platform specific updates for Qualcomm SoCs, including a new
  TEE subsystem driver for the Qualcomm QTEE firmware interface.

  Added support for the Apple A11 SoC in drivers that are shared with
  the M1/M2 series, among more updates for those.

  Smaller platform specific driver updates for Renesas, ASpeed,
  Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale
  SoCs.

  Driver updates in the cache controller, memory controller and reset
  controller subsystems.

  SCMI firmware updates to add more features and improve robustness.
  This includes support for having multiple SCMI providers in a single
  system.

  TEE subsystem support for protected DMA-bufs, allowing hardware to
  access memory areas that managed by the kernel but remain inaccessible
  from the CPU in EL1/EL0"

* tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits)
  soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu()
  soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver
  soc: fsl: qe: Change GPIO driver to a proper platform driver
  tee: fix register_shm_helper()
  pmdomain: apple: Add "apple,t8103-pmgr-pwrstate"
  dt-bindings: spmi: Add Apple A11 and T2 compatible
  serial: qcom-geni: Load UART qup Firmware from linux side
  spi: geni-qcom: Load spi qup Firmware from linux side
  i2c: qcom-geni: Load i2c qup Firmware from linux side
  soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem
  soc: qcom: geni-se: Cleanup register defines and update copyright
  dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus
  Documentation: tee: Add Qualcomm TEE driver
  tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl
  tee: qcom: add primordial object
  tee: add Qualcomm TEE driver
  tee: increase TEE_MAX_ARG_SIZE to 4096
  tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF
  tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF
  tee: add close_context to TEE driver operation
  ...

7 files changed, 301 insertions, 4 deletions

diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 635eef469ab7..78b7078478d4 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -22,6 +22,13 @@ config RESET_A10SR
 	  This option enables support for the external reset functions for
 	  peripheral PHYs on the Altera Arria10 System Resource Chip.
 
+config RESET_ASPEED
+	tristate "ASPEED Reset Driver"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	select AUXILIARY_BUS
+	help
+	  This enables the reset controller driver for AST2700.
+
 config RESET_ATH79
 	bool "AR71xx Reset Driver" if COMPILE_TEST
 	default ATH79
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index a917d2522e8d..f7934f9fb90b 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -6,6 +6,7 @@ obj-y += starfive/
 obj-y += sti/
 obj-y += tegra/
 obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
+obj-$(CONFIG_RESET_ASPEED) += reset-aspeed.o
 obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
 obj-$(CONFIG_RESET_AXS10X) += reset-axs10x.o
 obj-$(CONFIG_RESET_BCM6345) += reset-bcm6345.o
diff --git a/drivers/reset/reset-aspeed.c b/drivers/reset/reset-aspeed.c
new file mode 100644
index 000000000000..dd2f860a69d7
--- /dev/null
+++ b/drivers/reset/reset-aspeed.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2024 ASPEED Technology Inc.
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/cleanup.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/reset/aspeed,ast2700-scu.h>
+
+#define SCU0_RESET_CTRL1 0x200
+#define SCU0_RESET_CTRL2 0x220
+#define SCU1_RESET_CTRL1 0x200
+#define SCU1_RESET_CTRL2 0x220
+#define SCU1_PCIE3_CTRL 0x908
+
+struct ast2700_reset_signal {
+	bool dedicated_clr; /* dedicated reset clr offset */
+	u32 offset, bit;
+};
+
+struct aspeed_reset_info {
+	unsigned int nr_resets;
+	const struct ast2700_reset_signal *signal;
+};
+
+struct aspeed_reset {
+	struct reset_controller_dev rcdev;
+	struct aspeed_reset_info *info;
+	spinlock_t lock; /* Protect read-modify-write cycle */
+	void __iomem *base;
+};
+
+static const struct ast2700_reset_signal ast2700_reset0_signals[] = {
+	[SCU0_RESET_SDRAM] = { true, SCU0_RESET_CTRL1, BIT(0) },
+	[SCU0_RESET_DDRPHY] = { true, SCU0_RESET_CTRL1, BIT(1) },
+	[SCU0_RESET_RSA] = { true, SCU0_RESET_CTRL1, BIT(2) },
+	[SCU0_RESET_SHA3] = { true, SCU0_RESET_CTRL1, BIT(3) },
+	[SCU0_RESET_HACE] = { true, SCU0_RESET_CTRL1, BIT(4) },
+	[SCU0_RESET_SOC] = { true, SCU0_RESET_CTRL1, BIT(5) },
+	[SCU0_RESET_VIDEO] = { true, SCU0_RESET_CTRL1, BIT(6) },
+	[SCU0_RESET_2D] = { true, SCU0_RESET_CTRL1, BIT(7) },
+	[SCU0_RESET_PCIS] = { true, SCU0_RESET_CTRL1, BIT(8) },
+	[SCU0_RESET_RVAS0] = { true, SCU0_RESET_CTRL1, BIT(9) },
+	[SCU0_RESET_RVAS1] = { true, SCU0_RESET_CTRL1, BIT(10) },
+	[SCU0_RESET_SM3] = { true, SCU0_RESET_CTRL1, BIT(11) },
+	[SCU0_RESET_SM4] = { true, SCU0_RESET_CTRL1, BIT(12) },
+	[SCU0_RESET_CRT0] = { true, SCU0_RESET_CTRL1, BIT(13) },
+	[SCU0_RESET_ECC] = { true, SCU0_RESET_CTRL1, BIT(14) },
+	[SCU0_RESET_DP_PCI] = { true, SCU0_RESET_CTRL1, BIT(15) },
+	[SCU0_RESET_UFS] = { true, SCU0_RESET_CTRL1, BIT(16) },
+	[SCU0_RESET_EMMC] = { true, SCU0_RESET_CTRL1, BIT(17) },
+	[SCU0_RESET_PCIE1RST] = { true, SCU0_RESET_CTRL1, BIT(18) },
+	[SCU0_RESET_PCIE1RSTOE] = { true, SCU0_RESET_CTRL1, BIT(19) },
+	[SCU0_RESET_PCIE0RST] = { true, SCU0_RESET_CTRL1, BIT(20) },
+	[SCU0_RESET_PCIE0RSTOE] = { true, SCU0_RESET_CTRL1, BIT(21) },
+	[SCU0_RESET_JTAG] = { true, SCU0_RESET_CTRL1, BIT(22) },
+	[SCU0_RESET_MCTP0] = { true, SCU0_RESET_CTRL1, BIT(23) },
+	[SCU0_RESET_MCTP1] = { true, SCU0_RESET_CTRL1, BIT(24) },
+	[SCU0_RESET_XDMA0] = { true, SCU0_RESET_CTRL1, BIT(25) },
+	[SCU0_RESET_XDMA1] = { true, SCU0_RESET_CTRL1, BIT(26) },
+	[SCU0_RESET_H2X1] = { true, SCU0_RESET_CTRL1, BIT(27) },
+	[SCU0_RESET_DP] = { true, SCU0_RESET_CTRL1, BIT(28) },
+	[SCU0_RESET_DP_MCU] = { true, SCU0_RESET_CTRL1, BIT(29) },
+	[SCU0_RESET_SSP] = { true, SCU0_RESET_CTRL1, BIT(30) },
+	[SCU0_RESET_H2X0] = { true, SCU0_RESET_CTRL1, BIT(31) },
+	[SCU0_RESET_PORTA_VHUB] = { true, SCU0_RESET_CTRL2, BIT(0) },
+	[SCU0_RESET_PORTA_PHY3] = { true, SCU0_RESET_CTRL2, BIT(1) },
+	[SCU0_RESET_PORTA_XHCI] = { true, SCU0_RESET_CTRL2, BIT(2) },
+	[SCU0_RESET_PORTB_VHUB] = { true, SCU0_RESET_CTRL2, BIT(3) },
+	[SCU0_RESET_PORTB_PHY3] = { true, SCU0_RESET_CTRL2, BIT(4) },
+	[SCU0_RESET_PORTB_XHCI] = { true, SCU0_RESET_CTRL2, BIT(5) },
+	[SCU0_RESET_PORTA_VHUB_EHCI] = { true, SCU0_RESET_CTRL2, BIT(6) },
+	[SCU0_RESET_PORTB_VHUB_EHCI] = { true, SCU0_RESET_CTRL2, BIT(7) },
+	[SCU0_RESET_UHCI] = { true, SCU0_RESET_CTRL2, BIT(8) },
+	[SCU0_RESET_TSP] = { true, SCU0_RESET_CTRL2, BIT(9) },
+	[SCU0_RESET_E2M0] = { true, SCU0_RESET_CTRL2, BIT(10) },
+	[SCU0_RESET_E2M1] = { true, SCU0_RESET_CTRL2, BIT(11) },
+	[SCU0_RESET_VLINK] = { true, SCU0_RESET_CTRL2, BIT(12) },
+};
+
+static const struct ast2700_reset_signal ast2700_reset1_signals[] = {
+	[SCU1_RESET_LPC0] = { true, SCU1_RESET_CTRL1, BIT(0) },
+	[SCU1_RESET_LPC1] = { true, SCU1_RESET_CTRL1, BIT(1) },
+	[SCU1_RESET_MII] = { true, SCU1_RESET_CTRL1, BIT(2) },
+	[SCU1_RESET_PECI] = { true, SCU1_RESET_CTRL1, BIT(3) },
+	[SCU1_RESET_PWM] = { true, SCU1_RESET_CTRL1, BIT(4) },
+	[SCU1_RESET_MAC0] = { true, SCU1_RESET_CTRL1, BIT(5) },
+	[SCU1_RESET_MAC1] = { true, SCU1_RESET_CTRL1, BIT(6) },
+	[SCU1_RESET_MAC2] = { true, SCU1_RESET_CTRL1, BIT(7) },
+	[SCU1_RESET_ADC] = { true, SCU1_RESET_CTRL1, BIT(8) },
+	[SCU1_RESET_SD] = { true, SCU1_RESET_CTRL1, BIT(9) },
+	[SCU1_RESET_ESPI0] = { true, SCU1_RESET_CTRL1, BIT(10) },
+	[SCU1_RESET_ESPI1] = { true, SCU1_RESET_CTRL1, BIT(11) },
+	[SCU1_RESET_JTAG1] = { true, SCU1_RESET_CTRL1, BIT(12) },
+	[SCU1_RESET_SPI0] = { true, SCU1_RESET_CTRL1, BIT(13) },
+	[SCU1_RESET_SPI1] = { true, SCU1_RESET_CTRL1, BIT(14) },
+	[SCU1_RESET_SPI2] = { true, SCU1_RESET_CTRL1, BIT(15) },
+	[SCU1_RESET_I3C0] = { true, SCU1_RESET_CTRL1, BIT(16) },
+	[SCU1_RESET_I3C1] = { true, SCU1_RESET_CTRL1, BIT(17) },
+	[SCU1_RESET_I3C2] = { true, SCU1_RESET_CTRL1, BIT(18) },
+	[SCU1_RESET_I3C3] = { true, SCU1_RESET_CTRL1, BIT(19) },
+	[SCU1_RESET_I3C4] = { true, SCU1_RESET_CTRL1, BIT(20) },
+	[SCU1_RESET_I3C5] = { true, SCU1_RESET_CTRL1, BIT(21) },
+	[SCU1_RESET_I3C6] = { true, SCU1_RESET_CTRL1, BIT(22) },
+	[SCU1_RESET_I3C7] = { true, SCU1_RESET_CTRL1, BIT(23) },
+	[SCU1_RESET_I3C8] = { true, SCU1_RESET_CTRL1, BIT(24) },
+	[SCU1_RESET_I3C9] = { true, SCU1_RESET_CTRL1, BIT(25) },
+	[SCU1_RESET_I3C10] = { true, SCU1_RESET_CTRL1, BIT(26) },
+	[SCU1_RESET_I3C11] = { true, SCU1_RESET_CTRL1, BIT(27) },
+	[SCU1_RESET_I3C12] = { true, SCU1_RESET_CTRL1, BIT(28) },
+	[SCU1_RESET_I3C13] = { true, SCU1_RESET_CTRL1, BIT(29) },
+	[SCU1_RESET_I3C14] = { true, SCU1_RESET_CTRL1, BIT(30) },
+	[SCU1_RESET_I3C15] = { true, SCU1_RESET_CTRL1, BIT(31) },
+	[SCU1_RESET_MCU0] = { true, SCU1_RESET_CTRL2, BIT(0) },
+	[SCU1_RESET_MCU1] = { true, SCU1_RESET_CTRL2, BIT(1) },
+	[SCU1_RESET_H2A_SPI1] = { true, SCU1_RESET_CTRL2, BIT(2) },
+	[SCU1_RESET_H2A_SPI2] = { true, SCU1_RESET_CTRL2, BIT(3) },
+	[SCU1_RESET_UART0] = { true, SCU1_RESET_CTRL2, BIT(4) },
+	[SCU1_RESET_UART1] = { true, SCU1_RESET_CTRL2, BIT(5) },
+	[SCU1_RESET_UART2] = { true, SCU1_RESET_CTRL2, BIT(6) },
+	[SCU1_RESET_UART3] = { true, SCU1_RESET_CTRL2, BIT(7) },
+	[SCU1_RESET_I2C_FILTER] = { true, SCU1_RESET_CTRL2, BIT(8) },
+	[SCU1_RESET_CALIPTRA] = { true, SCU1_RESET_CTRL2, BIT(9) },
+	[SCU1_RESET_XDMA] = { true, SCU1_RESET_CTRL2, BIT(10) },
+	[SCU1_RESET_FSI] = { true, SCU1_RESET_CTRL2, BIT(12) },
+	[SCU1_RESET_CAN] = { true, SCU1_RESET_CTRL2, BIT(13) },
+	[SCU1_RESET_MCTP] = { true, SCU1_RESET_CTRL2, BIT(14) },
+	[SCU1_RESET_I2C] = { true, SCU1_RESET_CTRL2, BIT(15) },
+	[SCU1_RESET_UART6] = { true, SCU1_RESET_CTRL2, BIT(16) },
+	[SCU1_RESET_UART7] = { true, SCU1_RESET_CTRL2, BIT(17) },
+	[SCU1_RESET_UART8] = { true, SCU1_RESET_CTRL2, BIT(18) },
+	[SCU1_RESET_UART9] = { true, SCU1_RESET_CTRL2, BIT(19) },
+	[SCU1_RESET_LTPI0] = { true, SCU1_RESET_CTRL2, BIT(20) },
+	[SCU1_RESET_VGAL] = { true, SCU1_RESET_CTRL2, BIT(21) },
+	[SCU1_RESET_LTPI1] = { true, SCU1_RESET_CTRL2, BIT(22) },
+	[SCU1_RESET_ACE] = { true, SCU1_RESET_CTRL2, BIT(23) },
+	[SCU1_RESET_E2M] = { true, SCU1_RESET_CTRL2, BIT(24) },
+	[SCU1_RESET_UHCI] = { true, SCU1_RESET_CTRL2, BIT(25) },
+	[SCU1_RESET_PORTC_USB2UART] = { true, SCU1_RESET_CTRL2, BIT(26) },
+	[SCU1_RESET_PORTC_VHUB_EHCI] = { true, SCU1_RESET_CTRL2, BIT(27) },
+	[SCU1_RESET_PORTD_USB2UART] = { true, SCU1_RESET_CTRL2, BIT(28) },
+	[SCU1_RESET_PORTD_VHUB_EHCI] = { true, SCU1_RESET_CTRL2, BIT(29) },
+	[SCU1_RESET_H2X] = { true, SCU1_RESET_CTRL2, BIT(30) },
+	[SCU1_RESET_I3CDMA] = { true, SCU1_RESET_CTRL2, BIT(31) },
+	[SCU1_RESET_PCIE2RST] = { false, SCU1_PCIE3_CTRL, BIT(0) },
+};
+
+static inline struct aspeed_reset *to_aspeed_reset(struct reset_controller_dev *rcdev)
+{
+	return container_of(rcdev, struct aspeed_reset, rcdev);
+}
+
+static int aspeed_reset_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct aspeed_reset *rc = to_aspeed_reset(rcdev);
+	void __iomem *reg_offset = rc->base + rc->info->signal[id].offset;
+
+	if (rc->info->signal[id].dedicated_clr) {
+		writel(rc->info->signal[id].bit, reg_offset);
+	} else {
+		guard(spinlock_irqsave)(&rc->lock);
+		writel(readl(reg_offset) & ~rc->info->signal[id].bit, reg_offset);
+	}
+
+	return 0;
+}
+
+static int aspeed_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct aspeed_reset *rc = to_aspeed_reset(rcdev);
+	void __iomem *reg_offset = rc->base + rc->info->signal[id].offset;
+
+	if (rc->info->signal[id].dedicated_clr) {
+		writel(rc->info->signal[id].bit, reg_offset + 0x04);
+	} else {
+		guard(spinlock_irqsave)(&rc->lock);
+		writel(readl(reg_offset) | rc->info->signal[id].bit, reg_offset);
+	}
+
+	return 0;
+}
+
+static int aspeed_reset_status(struct reset_controller_dev *rcdev, unsigned long id)
+{
+	struct aspeed_reset *rc = to_aspeed_reset(rcdev);
+	void __iomem *reg_offset = rc->base + rc->info->signal[id].offset;
+
+	return (readl(reg_offset) & rc->info->signal[id].bit) ? 1 : 0;
+}
+
+static const struct reset_control_ops aspeed_reset_ops = {
+	.assert = aspeed_reset_assert,
+	.deassert = aspeed_reset_deassert,
+	.status = aspeed_reset_status,
+};
+
+static int aspeed_reset_probe(struct auxiliary_device *adev,
+			      const struct auxiliary_device_id *id)
+{
+	struct aspeed_reset *reset;
+	struct device *dev = &adev->dev;
+
+	reset = devm_kzalloc(dev, sizeof(*reset), GFP_KERNEL);
+	if (!reset)
+		return -ENOMEM;
+
+	spin_lock_init(&reset->lock);
+
+	reset->info = (struct aspeed_reset_info *)id->driver_data;
+	reset->rcdev.owner = THIS_MODULE;
+	reset->rcdev.nr_resets = reset->info->nr_resets;
+	reset->rcdev.ops = &aspeed_reset_ops;
+	reset->rcdev.of_node = dev->parent->of_node;
+	reset->rcdev.dev = dev;
+	reset->rcdev.of_reset_n_cells = 1;
+	reset->base = (void __iomem *)adev->dev.platform_data;
+
+	return devm_reset_controller_register(dev, &reset->rcdev);
+}
+
+static const struct aspeed_reset_info ast2700_reset0_info = {
+	.nr_resets = ARRAY_SIZE(ast2700_reset0_signals),
+	.signal = ast2700_reset0_signals,
+};
+
+static const struct aspeed_reset_info ast2700_reset1_info = {
+	.nr_resets = ARRAY_SIZE(ast2700_reset1_signals),
+	.signal = ast2700_reset1_signals,
+};
+
+static const struct auxiliary_device_id aspeed_reset_ids[] = {
+	{ .name = "clk_ast2700.reset0", .driver_data = (kernel_ulong_t)&ast2700_reset0_info },
+	{ .name = "clk_ast2700.reset1", .driver_data = (kernel_ulong_t)&ast2700_reset1_info },
+	{ }
+};
+MODULE_DEVICE_TABLE(auxiliary, aspeed_reset_ids);
+
+static struct auxiliary_driver aspeed_reset_driver = {
+	.probe		= aspeed_reset_probe,
+	.id_table	= aspeed_reset_ids,
+};
+
+module_auxiliary_driver(aspeed_reset_driver);
+
+MODULE_AUTHOR("Ryan Chen <ryan_chen@aspeedtech.com>");
+MODULE_DESCRIPTION("ASPEED SoC Reset Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/reset/reset-bcm6345.c b/drivers/reset/reset-bcm6345.c
index aa9353439e70..56518f7bfbb3 100644
--- a/drivers/reset/reset-bcm6345.c
+++ b/drivers/reset/reset-bcm6345.c
@@ -119,6 +119,7 @@ static int bcm6345_reset_probe(struct platform_device *pdev)
 
 static const struct of_device_id bcm6345_reset_of_match[] = {
 	{ .compatible = "brcm,bcm6345-reset" },
+	{ .compatible = "brcm,bcm63xx-ephy-ctrl" },
 	{ /* sentinel */ },
 };
 
diff --git a/drivers/reset/reset-intel-gw.c b/drivers/reset/reset-intel-gw.c
index a5a01388ae7f..a5ce3350cb5e 100644
--- a/drivers/reset/reset-intel-gw.c
+++ b/drivers/reset/reset-intel-gw.c
@@ -40,7 +40,6 @@ static const struct regmap_config intel_rcu_regmap_config = {
 	.reg_bits =	32,
 	.reg_stride =	4,
 	.val_bits =	32,
-	.fast_io =	true,
 };
 
 /*
diff --git a/drivers/reset/reset-qcom-pdc.c b/drivers/reset/reset-qcom-pdc.c
index dce1fc1a68ad..ae2b5aba7a59 100644
--- a/drivers/reset/reset-qcom-pdc.c
+++ b/drivers/reset/reset-qcom-pdc.c
@@ -36,7 +36,6 @@ static const struct regmap_config pdc_regmap_config = {
 	.reg_stride	= 4,
 	.val_bits	= 32,
 	.max_register	= 0x20000,
-	.fast_io	= true,
 };
 
 static const struct qcom_pdc_reset_map sdm845_pdc_resets[] = {
diff --git a/drivers/reset/reset-th1520.c b/drivers/reset/reset-th1520.c
index 7874f0693e1b..14d964a9c6b6 100644
--- a/drivers/reset/reset-th1520.c
+++ b/drivers/reset/reset-th1520.c
@@ -14,10 +14,20 @@
  /* register offset in VOSYS_REGMAP */
 #define TH1520_GPU_RST_CFG		0x0
 #define TH1520_GPU_RST_CFG_MASK		GENMASK(1, 0)
+#define TH1520_DPU_RST_CFG		0x4
+#define TH1520_DSI0_RST_CFG		0x8
+#define TH1520_DSI1_RST_CFG		0xc
+#define TH1520_HDMI_RST_CFG		0x14
 
 /* register values */
 #define TH1520_GPU_SW_GPU_RST		BIT(0)
 #define TH1520_GPU_SW_CLKGEN_RST	BIT(1)
+#define TH1520_DPU_SW_DPU_HRST		BIT(0)
+#define TH1520_DPU_SW_DPU_ARST		BIT(1)
+#define TH1520_DPU_SW_DPU_CRST		BIT(2)
+#define TH1520_DSI_SW_DSI_PRST		BIT(0)
+#define TH1520_HDMI_SW_MAIN_RST		BIT(0)
+#define TH1520_HDMI_SW_PRST		BIT(1)
 
 struct th1520_reset_priv {
 	struct reset_controller_dev rcdev;
@@ -37,7 +47,35 @@ static const struct th1520_reset_map th1520_resets[] = {
 	[TH1520_RESET_ID_GPU_CLKGEN] = {
 		.bit = TH1520_GPU_SW_CLKGEN_RST,
 		.reg = TH1520_GPU_RST_CFG,
-	}
+	},
+	[TH1520_RESET_ID_DPU_AHB] = {
+		.bit = TH1520_DPU_SW_DPU_HRST,
+		.reg = TH1520_DPU_RST_CFG,
+	},
+	[TH1520_RESET_ID_DPU_AXI] = {
+		.bit = TH1520_DPU_SW_DPU_ARST,
+		.reg = TH1520_DPU_RST_CFG,
+	},
+	[TH1520_RESET_ID_DPU_CORE] = {
+		.bit = TH1520_DPU_SW_DPU_CRST,
+		.reg = TH1520_DPU_RST_CFG,
+	},
+	[TH1520_RESET_ID_DSI0_APB] = {
+		.bit = TH1520_DSI_SW_DSI_PRST,
+		.reg = TH1520_DSI0_RST_CFG,
+	},
+	[TH1520_RESET_ID_DSI1_APB] = {
+		.bit = TH1520_DSI_SW_DSI_PRST,
+		.reg = TH1520_DSI1_RST_CFG,
+	},
+	[TH1520_RESET_ID_HDMI] = {
+		.bit = TH1520_HDMI_SW_MAIN_RST,
+		.reg = TH1520_HDMI_RST_CFG,
+	},
+	[TH1520_RESET_ID_HDMI_APB] = {
+		.bit = TH1520_HDMI_SW_PRST,
+		.reg = TH1520_HDMI_RST_CFG,
+	},
 };
 
 static inline struct th1520_reset_priv *
@@ -78,7 +116,6 @@ static const struct regmap_config th1520_reset_regmap_config = {
 	.reg_bits = 32,
 	.val_bits = 32,
 	.reg_stride = 4,
-	.fast_io = true,
 };
 
 static int th1520_reset_probe(struct platform_device *pdev)