Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

45 files changed, 3618 insertions, 219 deletions

diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index cb150a1dbaff..54fce56c8023 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -88,10 +88,13 @@ int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots,
 			goto err_mem;
 	}
 
-	/* Mark slots as 'unused' */
+	/* Mark slots as 'inactive' */
 	for (i = 0; i < num_slots; i++)
 		input_mt_set_value(&mt->slots[i], ABS_MT_TRACKING_ID, -1);
 
+	/* Mark slots as 'unused' */
+	mt->frame = 1;
+
 	dev->mt = mt;
 	return 0;
 err_mem:
@@ -365,27 +368,35 @@ static void input_mt_set_slots(struct input_mt *mt,
 			       int *slots, int num_pos)
 {
 	struct input_mt_slot *s;
-	int *w = mt->red, *p;
+	int *w = mt->red, j;
 
-	for (p = slots; p != slots + num_pos; p++)
-		*p = -1;
+	for (j = 0; j != num_pos; j++)
+		slots[j] = -1;
 
 	for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
 		if (!input_mt_is_active(s))
 			continue;
-		for (p = slots; p != slots + num_pos; p++)
-			if (*w++ < 0)
-				*p = s - mt->slots;
+
+		for (j = 0; j != num_pos; j++) {
+			if (w[j] < 0) {
+				slots[j] = s - mt->slots;
+				break;
+			}
+		}
+
+		w += num_pos;
 	}
 
 	for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
 		if (input_mt_is_active(s))
 			continue;
-		for (p = slots; p != slots + num_pos; p++)
-			if (*p < 0) {
-				*p = s - mt->slots;
+
+		for (j = 0; j != num_pos; j++) {
+			if (slots[j] < 0) {
+				slots[j] = s - mt->slots;
 				break;
 			}
+		}
 	}
 }
 
@@ -439,6 +450,8 @@ EXPORT_SYMBOL(input_mt_assign_slots);
  * set the key on the first unused slot and return.
  *
  * If no available slot can be found, -1 is returned.
+ * Note that for this function to work properly, input_mt_sync_frame() has
+ * to be called at each frame.
  */
 int input_mt_get_slot_by_key(struct input_dev *dev, int key)
 {
@@ -453,7 +466,7 @@ int input_mt_get_slot_by_key(struct input_dev *dev, int key)
 			return s - mt->slots;
 
 	for (s = mt->slots; s != mt->slots + mt->num_slots; s++)
-		if (!input_mt_is_active(s)) {
+		if (!input_mt_is_active(s) && !input_mt_is_used(mt, s)) {
 			s->key = key;
 			return s - mt->slots;
 		}
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index a89ba7cb96f1..106fbac7f8c5 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -588,6 +588,16 @@ config KEYBOARD_DAVINCI
 	  To compile this driver as a module, choose M here: the
 	  module will be called davinci_keyscan.
 
+config KEYBOARD_IPAQ_MICRO
+	tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)"
+	depends on MFD_IPAQ_MICRO
+	help
+	  Say Y to enable support for the buttons attached to
+	  Micro peripheral controller on iPAQ h3100/h3600/h3700
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ipaq-micro-keys.
+
 config KEYBOARD_OMAP
 	tristate "TI OMAP keypad support"
 	depends on ARCH_OMAP1
@@ -686,4 +696,15 @@ config KEYBOARD_CAP11XX
 	  To compile this driver as a module, choose M here: the
 	  module will be called cap11xx.
 
+config KEYBOARD_BCM
+	tristate "Broadcom keypad driver"
+	depends on OF && HAVE_CLK
+	select INPUT_MATRIXKMAP
+	default ARCH_BCM_CYGNUS
+	help
+	  Say Y here if you want to use Broadcom keypad.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bcm-keypad.
+
 endif
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 470767884bd8..df28d5553c05 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_KEYBOARD_ADP5589)		+= adp5589-keys.o
 obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
+obj-$(CONFIG_KEYBOARD_BCM)		+= bcm-keypad.o
 obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_CAP11XX)		+= cap11xx.o
 obj-$(CONFIG_KEYBOARD_CLPS711X)		+= clps711x-keypad.o
@@ -23,6 +24,7 @@ obj-$(CONFIG_KEYBOARD_TCA6416)		+= tca6416-keypad.o
 obj-$(CONFIG_KEYBOARD_TCA8418)		+= tca8418_keypad.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
+obj-$(CONFIG_KEYBOARD_IPAQ_MICRO)	+= ipaq-micro-keys.o
 obj-$(CONFIG_KEYBOARD_IMX)		+= imx_keypad.o
 obj-$(CONFIG_KEYBOARD_HP6XX)		+= jornada680_kbd.o
 obj-$(CONFIG_KEYBOARD_HP7XX)		+= jornada720_kbd.o
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 387c51f4b4e4..ec876b5b1382 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -1653,6 +1653,12 @@ static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id)
 	return 1;
 }
 
+/*
+ * NOTE: do not add any more "force release" quirks to this table.  The
+ * task of adjusting list of keys that should be "released" automatically
+ * by the driver is now delegated to userspace tools, such as udev, so
+ * submit such quirks there.
+ */
 static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = {
 	{
 		.matches = {
diff --git a/drivers/input/keyboard/bcm-keypad.c b/drivers/input/keyboard/bcm-keypad.c
new file mode 100644
index 000000000000..86a8b723ae15
--- /dev/null
+++ b/drivers/input/keyboard/bcm-keypad.c
@@ -0,0 +1,458 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/gfp.h>
+#include <linux/io.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/stddef.h>
+#include <linux/types.h>
+
+#define DEFAULT_CLK_HZ			31250
+#define MAX_ROWS			8
+#define MAX_COLS			8
+
+/* Register/field definitions */
+#define KPCR_OFFSET			0x00000080
+#define KPCR_MODE			0x00000002
+#define KPCR_MODE_SHIFT			1
+#define KPCR_MODE_MASK			1
+#define KPCR_ENABLE			0x00000001
+#define KPCR_STATUSFILTERENABLE		0x00008000
+#define KPCR_STATUSFILTERTYPE_SHIFT	12
+#define KPCR_COLFILTERENABLE		0x00000800
+#define KPCR_COLFILTERTYPE_SHIFT	8
+#define KPCR_ROWWIDTH_SHIFT		20
+#define KPCR_COLUMNWIDTH_SHIFT		16
+
+#define KPIOR_OFFSET			0x00000084
+#define KPIOR_ROWOCONTRL_SHIFT		24
+#define KPIOR_ROWOCONTRL_MASK		0xFF000000
+#define KPIOR_COLUMNOCONTRL_SHIFT	16
+#define KPIOR_COLUMNOCONTRL_MASK	0x00FF0000
+#define KPIOR_COLUMN_IO_DATA_SHIFT	0
+
+#define KPEMR0_OFFSET			0x00000090
+#define KPEMR1_OFFSET			0x00000094
+#define KPEMR2_OFFSET			0x00000098
+#define KPEMR3_OFFSET			0x0000009C
+#define KPEMR_EDGETYPE_BOTH		3
+
+#define KPSSR0_OFFSET			0x000000A0
+#define KPSSR1_OFFSET			0x000000A4
+#define KPSSRN_OFFSET(reg_n)		(KPSSR0_OFFSET + 4 * (reg_n))
+#define KPIMR0_OFFSET			0x000000B0
+#define KPIMR1_OFFSET			0x000000B4
+#define KPICR0_OFFSET			0x000000B8
+#define KPICR1_OFFSET			0x000000BC
+#define KPICRN_OFFSET(reg_n)		(KPICR0_OFFSET + 4 * (reg_n))
+#define KPISR0_OFFSET			0x000000C0
+#define KPISR1_OFFSET			0x000000C4
+
+#define KPCR_STATUSFILTERTYPE_MAX	7
+#define KPCR_COLFILTERTYPE_MAX		7
+
+/* Macros to determine the row/column from a bit that is set in SSR0/1. */
+#define BIT_TO_ROW_SSRN(bit_nr, reg_n)	(((bit_nr) >> 3) + 4 * (reg_n))
+#define BIT_TO_COL(bit_nr)		((bit_nr) % 8)
+
+/* Structure representing various run-time entities */
+struct bcm_kp {
+	void __iomem *base;
+	int irq;
+	struct clk *clk;
+	struct input_dev *input_dev;
+	unsigned long last_state[2];
+	unsigned int n_rows;
+	unsigned int n_cols;
+	u32 kpcr;
+	u32 kpior;
+	u32 kpemr;
+	u32 imr0_val;
+	u32 imr1_val;
+};
+
+/*
+ * Returns the keycode from the input device keymap given the row and
+ * column.
+ */
+static int bcm_kp_get_keycode(struct bcm_kp *kp, int row, int col)
+{
+	unsigned int row_shift = get_count_order(kp->n_cols);
+	unsigned short *keymap = kp->input_dev->keycode;
+
+	return keymap[MATRIX_SCAN_CODE(row, col, row_shift)];
+}
+
+static void bcm_kp_report_keys(struct bcm_kp *kp, int reg_num, int pull_mode)
+{
+	unsigned long state, change;
+	int bit_nr;
+	int key_press;
+	int row, col;
+	unsigned int keycode;
+
+	/* Clear interrupts */
+	writel(0xFFFFFFFF, kp->base + KPICRN_OFFSET(reg_num));
+
+	state = readl(kp->base + KPSSRN_OFFSET(reg_num));
+	change = kp->last_state[reg_num] ^ state;
+	kp->last_state[reg_num] = state;
+
+	for_each_set_bit(bit_nr, &change, BITS_PER_LONG) {
+		key_press = state & BIT(bit_nr);
+		/* The meaning of SSR register depends on pull mode. */
+		key_press = pull_mode ? !key_press : key_press;
+		row = BIT_TO_ROW_SSRN(bit_nr, reg_num);
+		col = BIT_TO_COL(bit_nr);
+		keycode = bcm_kp_get_keycode(kp, row, col);
+		input_report_key(kp->input_dev, keycode, key_press);
+	}
+}
+
+static irqreturn_t bcm_kp_isr_thread(int irq, void *dev_id)
+{
+	struct bcm_kp *kp = dev_id;
+	int pull_mode = (kp->kpcr >> KPCR_MODE_SHIFT) & KPCR_MODE_MASK;
+	int reg_num;
+
+	for (reg_num = 0; reg_num <= 1; reg_num++)
+		bcm_kp_report_keys(kp, reg_num, pull_mode);
+
+	input_sync(kp->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int bcm_kp_start(struct bcm_kp *kp)
+{
+	int error;
+
+	if (kp->clk) {
+		error = clk_prepare_enable(kp->clk);
+		if (error)
+			return error;
+	}
+
+	writel(kp->kpior, kp->base + KPIOR_OFFSET);
+
+	writel(kp->imr0_val, kp->base + KPIMR0_OFFSET);
+	writel(kp->imr1_val, kp->base + KPIMR1_OFFSET);
+
+	writel(kp->kpemr, kp->base + KPEMR0_OFFSET);
+	writel(kp->kpemr, kp->base + KPEMR1_OFFSET);
+	writel(kp->kpemr, kp->base + KPEMR2_OFFSET);
+	writel(kp->kpemr, kp->base + KPEMR3_OFFSET);
+
+	writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET);
+	writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET);
+
+	kp->last_state[0] = readl(kp->base + KPSSR0_OFFSET);
+	kp->last_state[0] = readl(kp->base + KPSSR1_OFFSET);
+
+	writel(kp->kpcr | KPCR_ENABLE, kp->base + KPCR_OFFSET);
+
+	return 0;
+}
+
+static void bcm_kp_stop(const struct bcm_kp *kp)
+{
+	u32 val;
+
+	val = readl(kp->base + KPCR_OFFSET);
+	val &= ~KPCR_ENABLE;
+	writel(0, kp->base + KPCR_OFFSET);
+	writel(0, kp->base + KPIMR0_OFFSET);
+	writel(0, kp->base + KPIMR1_OFFSET);
+	writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET);
+	writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET);
+
+	if (kp->clk)
+		clk_disable_unprepare(kp->clk);
+}
+
+static int bcm_kp_open(struct input_dev *dev)
+{
+	struct bcm_kp *kp = input_get_drvdata(dev);
+
+	return bcm_kp_start(kp);
+}
+
+static void bcm_kp_close(struct input_dev *dev)
+{
+	struct bcm_kp *kp = input_get_drvdata(dev);
+
+	bcm_kp_stop(kp);
+}
+
+static int bcm_kp_matrix_key_parse_dt(struct bcm_kp *kp)
+{
+	struct device *dev = kp->input_dev->dev.parent;
+	struct device_node *np = dev->of_node;
+	int error;
+	unsigned int dt_val;
+	unsigned int i;
+	unsigned int num_rows, col_mask, rows_set;
+
+	/* Initialize the KPCR Keypad Configuration Register */
+	kp->kpcr = KPCR_STATUSFILTERENABLE | KPCR_COLFILTERENABLE;
+
+	error = matrix_keypad_parse_of_params(dev, &kp->n_rows, &kp->n_cols);
+	if (error) {
+		dev_err(dev, "failed to parse kp params\n");
+		return error;
+	}
+
+	/* Set row width for the ASIC block. */
+	kp->kpcr |= (kp->n_rows - 1) << KPCR_ROWWIDTH_SHIFT;
+
+	/* Set column width for the ASIC block. */
+	kp->kpcr |= (kp->n_cols - 1) << KPCR_COLUMNWIDTH_SHIFT;
+
+	/* Configure the IMR registers */
+
+	/*
+	 * IMR registers contain interrupt enable bits for 8x8 matrix
+	 * IMR0 register format: <row3> <row2> <row1> <row0>
+	 * IMR1 register format: <row7> <row6> <row5> <row4>
+	 */
+	col_mask = (1 << (kp->n_cols)) - 1;
+	num_rows = kp->n_rows;
+
+	/* Set column bits in rows 0 to 3 in IMR0 */
+	kp->imr0_val = col_mask;
+
+	rows_set = 1;
+	while (--num_rows && rows_set++ < 4)
+		kp->imr0_val |= kp->imr0_val << MAX_COLS;
+
+	/* Set column bits in rows 4 to 7 in IMR1 */
+	kp->imr1_val = 0;
+	if (num_rows) {
+		kp->imr1_val = col_mask;
+		while (--num_rows)
+			kp->imr1_val |= kp->imr1_val << MAX_COLS;
+	}
+
+	/* Initialize the KPEMR Keypress Edge Mode Registers */
+	/* Trigger on both edges */
+	kp->kpemr = 0;
+	for (i = 0; i <= 30; i += 2)
+		kp->kpemr |= (KPEMR_EDGETYPE_BOTH << i);
+
+	/*
+	 * Obtain the Status filter debounce value and verify against the
+	 * possible values specified in the DT binding.
+	 */
+	of_property_read_u32(np, "status-debounce-filter-period", &dt_val);
+
+	if (dt_val > KPCR_STATUSFILTERTYPE_MAX) {
+		dev_err(dev, "Invalid Status filter debounce value %d\n",
+			dt_val);
+		return -EINVAL;
+	}
+
+	kp->kpcr |= dt_val << KPCR_STATUSFILTERTYPE_SHIFT;
+
+	/*
+	 * Obtain the Column filter debounce value and verify against the
+	 * possible values specified in the DT binding.
+	 */
+	of_property_read_u32(np, "col-debounce-filter-period", &dt_val);
+
+	if (dt_val > KPCR_COLFILTERTYPE_MAX) {
+		dev_err(dev, "Invalid Column filter debounce value %d\n",
+			dt_val);
+		return -EINVAL;
+	}
+
+	kp->kpcr |= dt_val << KPCR_COLFILTERTYPE_SHIFT;
+
+	/*
+	 * Determine between the row and column,
+	 * which should be configured as output.
+	 */
+	if (of_property_read_bool(np, "row-output-enabled")) {
+		/*
+		* Set RowOContrl or ColumnOContrl in KPIOR
+		* to the number of pins to drive as outputs
+		*/
+		kp->kpior = ((1 << kp->n_rows) - 1) <<
+				KPIOR_ROWOCONTRL_SHIFT;
+	} else {
+		kp->kpior = ((1 << kp->n_cols) - 1) <<
+				KPIOR_COLUMNOCONTRL_SHIFT;
+	}
+
+	/*
+	 * Determine if the scan pull up needs to be enabled
+	 */
+	if (of_property_read_bool(np, "pull-up-enabled"))
+		kp->kpcr |= KPCR_MODE;
+
+	dev_dbg(dev, "n_rows=%d n_col=%d kpcr=%x kpior=%x kpemr=%x\n",
+		kp->n_rows, kp->n_cols,
+		kp->kpcr, kp->kpior, kp->kpemr);
+
+	return 0;
+}
+
+
+static int bcm_kp_probe(struct platform_device *pdev)
+{
+	struct bcm_kp *kp;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int error;
+
+	kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL);
+	if (!kp)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate the input device\n");
+		return -ENOMEM;
+	}
+
+	__set_bit(EV_KEY, input_dev->evbit);
+
+	/* Enable auto repeat feature of Linux input subsystem */
+	if (of_property_read_bool(pdev->dev.of_node, "autorepeat"))
+		__set_bit(EV_REP, input_dev->evbit);
+
+	input_dev->name = pdev->name;
+	input_dev->phys = "keypad/input0";
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = bcm_kp_open;
+	input_dev->close = bcm_kp_close;
+
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+
+	input_set_drvdata(input_dev, kp);
+
+	kp->input_dev = input_dev;
+
+	platform_set_drvdata(pdev, kp);
+
+	error = bcm_kp_matrix_key_parse_dt(kp);
+	if (error)
+		return error;
+
+	error = matrix_keypad_build_keymap(NULL, NULL,
+					   kp->n_rows, kp->n_cols,
+					   NULL, input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to build keymap\n");
+		return error;
+	}
+
+	/* Get the KEYPAD base address */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Missing keypad base address resource\n");
+		return -ENODEV;
+	}
+
+	kp->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(kp->base))
+		return PTR_ERR(kp->base);
+
+	/* Enable clock */
+	kp->clk = devm_clk_get(&pdev->dev, "peri_clk");
+	if (IS_ERR(kp->clk)) {
+		error = PTR_ERR(kp->clk);
+		if (error != -ENOENT) {
+			if (error != -EPROBE_DEFER)
+				dev_err(&pdev->dev, "Failed to get clock\n");
+			return error;
+		}
+		dev_dbg(&pdev->dev,
+			"No clock specified. Assuming it's enabled\n");
+		kp->clk = NULL;
+	} else {
+		unsigned int desired_rate;
+		long actual_rate;
+
+		error = of_property_read_u32(pdev->dev.of_node,
+					     "clock-frequency", &desired_rate);
+		if (error < 0)
+			desired_rate = DEFAULT_CLK_HZ;
+
+		actual_rate = clk_round_rate(kp->clk, desired_rate);
+		if (actual_rate <= 0)
+			return -EINVAL;
+
+		error = clk_set_rate(kp->clk, actual_rate);
+		if (error)
+			return error;
+
+		error = clk_prepare_enable(kp->clk);
+		if (error)
+			return error;
+	}
+
+	/* Put the kp into a known sane state */
+	bcm_kp_stop(kp);
+
+	kp->irq = platform_get_irq(pdev, 0);
+	if (kp->irq < 0) {
+		dev_err(&pdev->dev, "no IRQ specified\n");
+		return -EINVAL;
+	}
+
+	error = devm_request_threaded_irq(&pdev->dev, kp->irq,
+					  NULL, bcm_kp_isr_thread,
+					  IRQF_ONESHOT, pdev->name, kp);
+	if (error) {
+		dev_err(&pdev->dev, "failed to request IRQ\n");
+		return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&pdev->dev, "failed to register input device\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id bcm_kp_of_match[] = {
+	{ .compatible = "brcm,bcm-keypad" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, bcm_kp_of_match);
+
+static struct platform_driver bcm_kp_device_driver = {
+	.probe		= bcm_kp_probe,
+	.driver		= {
+		.name	= "bcm-keypad",
+		.of_match_table = of_match_ptr(bcm_kp_of_match),
+	}
+};
+
+module_platform_driver(bcm_kp_device_driver);
+
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_DESCRIPTION("BCM Keypad Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
index ffa989f2c785..64b9b59ad4cb 100644
--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -338,7 +338,7 @@ static int cros_ec_keyb_resume(struct device *dev)
 	 * wake source (e.g. the lid is open and the user might press a key to
 	 * wake) then the key scan buffer should be preserved.
 	 */
-	if (ckdev->ec->was_wake_device)
+	if (!ckdev->ec->was_wake_device)
 		cros_ec_keyb_clear_keyboard(ckdev);
 
 	return 0;
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
index 90df4df58b07..097d7216d98e 100644
--- a/drivers/input/keyboard/gpio_keys_polled.c
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -125,7 +125,7 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct
 	device_for_each_child_node(dev, child) {
 		struct gpio_desc *desc;
 
-		desc = devm_get_gpiod_from_child(dev, child);
+		desc = devm_get_gpiod_from_child(dev, NULL, child);
 		if (IS_ERR(desc)) {
 			error = PTR_ERR(desc);
 			if (error != -EPROBE_DEFER)
diff --git a/drivers/input/keyboard/ipaq-micro-keys.c b/drivers/input/keyboard/ipaq-micro-keys.c
new file mode 100644
index 000000000000..602900d1f937
--- /dev/null
+++ b/drivers/input/keyboard/ipaq-micro-keys.c
@@ -0,0 +1,168 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * h3600 atmel micro companion support, key subdevice
+ * based on previous kernel 2.4 version
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/pm.h>
+#include <linux/sysctl.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ipaq-micro.h>
+
+struct ipaq_micro_keys {
+	struct ipaq_micro *micro;
+	struct input_dev *input;
+	u16 *codes;
+};
+
+static const u16 micro_keycodes[] = {
+	KEY_RECORD,		/* 1:  Record button			*/
+	KEY_CALENDAR,		/* 2:  Calendar				*/
+	KEY_ADDRESSBOOK,	/* 3:  Contacts (looks like Outlook)	*/
+	KEY_MAIL,		/* 4:  Envelope (Q on older iPAQs)	*/
+	KEY_HOMEPAGE,		/* 5:  Start (looks like swoopy arrow)	*/
+	KEY_UP,			/* 6:  Up				*/
+	KEY_RIGHT,		/* 7:  Right				*/
+	KEY_LEFT,		/* 8:  Left				*/
+	KEY_DOWN,		/* 9:  Down				*/
+};
+
+static void micro_key_receive(void *data, int len, unsigned char *msg)
+{
+	struct ipaq_micro_keys *keys = data;
+	int key, down;
+
+	down = 0x80 & msg[0];
+	key  = 0x7f & msg[0];
+
+	if (key < ARRAY_SIZE(micro_keycodes)) {
+		input_report_key(keys->input, keys->codes[key], down);
+		input_sync(keys->input);
+	}
+}
+
+static void micro_key_start(struct ipaq_micro_keys *keys)
+{
+	spin_lock(&keys->micro->lock);
+	keys->micro->key = micro_key_receive;
+	keys->micro->key_data = keys;
+	spin_unlock(&keys->micro->lock);
+}
+
+st