diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2025-12-04 08:53:30 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2025-12-04 08:53:30 -0800 |
| commit | 6dfafbd0299a60bfb5d5e277fdf100037c7ded07 (patch) | |
| tree | accb0e721120091f05107277744187d09e86fe5a /Documentation/devicetree/bindings | |
| parent | 94e244d9ccab578f83a218ec58376d025014fcce (diff) | |
| parent | 0692602defb0c273f80dec9c564ca50726404aca (diff) | |
Merge tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"There was a rather late merge of a new color pipeline feature, that
some userspace projects are blocked on, and has seen a lot of work in
amdgpu. This should have seen some time in -next. There is additional
support for this for Intel, that if it arrives in the next day or two
I'll pass it on in another pull request and you can decide if you want
to take it.
Highlights:
- Arm Ethos NPU accelerator driver
- new DRM color pipeline support
- amdgpu will now run discrete SI/CIK cards instead of radeon, which
enables vulkan support in userspace
- msm gets gen8 gpu support
- initial Xe3P support in xe
Full detail summary:
New driver:
- Arm Ethos-U65/U85 accel driver
Core:
- support the drm color pipeline in vkms/amdgfx
- add support for drm colorop pipeline
- add COLOR PIPELINE plane property
- add DRM_CLIENT_CAP_PLANE_COLOR_PIPELINE
- throttle dirty worker with vblank
- use drm_for_each_bridge_in_chain_scoped in drm's bridge code
- Ensure drm_client_modeset tests are enabled in UML
- add simulated vblank interrupt - use in drivers
- dumb buffer sizing helper
- move freeing of drm client memory to driver
- crtc sharpness strength property
- stop using system_wq in scheduler/drivers
- support emergency restore in drm-client
Rust:
- make slice::as_flattened usable on all supported rustc
- add FromBytes::from_bytes_prefix() method
- remove redundant device ptr from Rust GEM object
- Change how AlwaysRefCounted is implemented for GEM objects
gpuvm:
- Add deferred vm_bo cleanup to GPUVM (for rust)
atomic:
- cleanup and improve state handling interfaces
buddy:
- optimize block management
dma-buf:
- heaps: Create heap per CMA reserved location
- improve userspace documentation
dp:
- add POST_LT_ADJ_REQ training sequence
- DPCD dSC quirk for synaptics panamera devices
- helpers to query branch DSC max throughput
ttm:
- Rename ttm_bo_put to ttm_bo_fini
- allow page protection flags on risc-v
- rework pipelined eviction fence handling
amdgpu:
- enable amdgpu by default for SI/CI dGPUs
- enable DC by default on SI
- refactor CIK/SI enablement
- add ABM KMS property
- Re-enable DM idle optimizations
- DC Analog encoders support
- Powerplay fixes for fiji/iceland
- Enable DC on bonaire by default
- HMM cleanup
- Add new RAS framework
- DML2.1 updates
- YCbCr420 fixes
- DC FP fixes
- DMUB fixes
- LTTPR fixes
- DTBCLK fixes
- DMU cursor offload handling
- Userq validation improvements
- Unify shutdown callback handling
- Suspend improvements
- Power limit code cleanup
- SR-IOV fixes
- AUX backlight fixes
- DCN 3.5 fixes
- HDMI compliance fixes
- DCN 4.0.1 cursor updates
- DCN interrupt fix
- DC KMS full update improvements
- Add additional HDCP traces
- DCN 3.2 fixes
- DP MST fixes
- Add support for new SR-IOV mailbox interface
- UQ reset support
- HDP flush rework
- VCE1 support
amdkfd:
- HMM cleanups
- Relax checks on save area overallocations
- Fix GPU mappings after prefetch
radeon:
- refactor CIK/SI enablement
xe:
- Initial Xe3P support
- panic support on VRAM for display
- fix stolen size check
- Loosen used tracking restriction
- New SR-IOV debugfs structure and debugfs updates
- Hide the GPU madvise flag behind a VM_BIND flag
- Always expose VRAM provisioning data on discrete GPUs
- Allow VRAM mappings for userptr when used with SVM
- Allow pinning of p2p dma-buf
- Use per-tile debugfs where appropriate
- Add documentation for Execution Queues
- PF improvements
- VF migration recovery redesign work
- User / Kernel VRAM partitioning
- Update Tile-based messages
- Allow configfs to disable specific GT types
- VF provisioning and migration improvements
- use SVM range helpers in PT layer
- Initial CRI support
- access VF registers using dedicated MMIO view
- limit number of jobs per exec queue
- add sriov_admin sysfs tree
- more crescent island specific support
- debugfs residency counter
- SRIOV migration work
- runtime registers for GFX 35
i915:
- add initial Xe3p_LPD display version 35 support
- Enable LNL+ content adaptive sharpness filter
- Use optimized VRR guardband
- Enable Xe3p LT PHY
- enable FBC support for Xe3p_LPD display
- add display 30.02 firmware support
- refactor SKL+ watermark latency setup
- refactor fbdev handling
- call i915/xe runtime PM via function pointers
- refactor i915/xe stolen memory/display interfaces
- use display version instead of gfx version in display code
- extend i915_display_info with Type-C port details
- lots of display cleanups/refactorings
- set O_LARGEFILE in __create_shmem
- skuip guc communication warning on reset
- fix time conversions
- defeature DRRS on LNL+
- refactor intel_frontbuffer split between i915/xe/display
- convert inteL_rom interfaces to struct drm_device
- unify display register polling interfaces
- aovid lock inversion when pinning to GGTT on CHV/BXT+VTD
panel:
- Add KD116N3730A08/A12, chromebook mt8189
- JT101TM023, LQ079L1SX01,
- GLD070WX3-SL01 MIPI DSI
- Samsung LTL106AL0, Samsung LTL106AL01
- Raystar RFF500F-AWH-DNN
- Winstar WF70A8SYJHLNGA
- Wanchanglong w552946aaa
- Samsung SOFEF00
- Lenovo X13s panel
- ilitek-ili9881c - add rpi 5" support
- visionx-rm69299 - add backlight support
- edp - support AUI B116XAN02.0
bridge:
- improve ref counting
- ti-sn65dsi86 - add support for DP mode with HPD
- synopsis: support CEC, init timer with correct freq
- ASL CS5263 DP-to-HDMI bridge support
nova-core:
- introduce bitfield! macro
- introduce safe integer converters
- GSP inits to fully booted state on Ampere
- Use more future-proof register for GPU identification
nova-drm:
- select NOVA_CORE
- 64-bit only
nouveau:
- improve reclocking on tegra 186+
- add large page and compression support
msm:
- GPU:
- Gen8 support: A840 (Kaanapali) and X2-85 (Glymur)
- A612 support
- MDSS:
- Added support for Glymur and QCS8300 platforms
- DPU:
- Enabled Quad-Pipe support, unlocking higher resolutions support
- Added support for Glymur platform
- Documented DPU on QCS8300 platform as supported
- DisplayPort:
- Added support for Glymur platform
- Added support lame remapping inside DP block
- Documented DisplayPort controller on QCS8300 and SM6150/QCS615
as supported
tegra:
- NVJPG driver
panfrost:
- display JM contexts over debugfs
- export JM contexts to userspace
- improve error and job handling
panthor:
- support custom ASN_HASH for mt8196
- support mali-G1 GPU
- flush shmem write before mapping buffers uncached
- make timeout per-queue instead of per-job
mediatek:
- MT8195/88 HDMIv2/DDCv2 support
rockchip:
- dsi: add support for RK3368
amdxdna:
- enhance runtime PM
- last hardware error reading uapi
- support firmware debug output
- add resource and telemetry data uapi
- preemption support
imx:
- add driver for HDMI TX Parallel audio interface
ivpu:
- add support for user-managed preemption buffer
- add userptr support
- update JSM firware API to 3.33.0
- add better alloc/free warnings
- fix page fault in unbind all bos
- rework bind/unbind of imported buffers
- enable MCA ECC signalling
- split fw runtime and global memory buffers
- add fdinfo memory statistics
tidss:
- convert to drm logging
- logging cleanup
ast:
- refactor generation init paths
- add per chip generation detect_tx_chip
- set quirks for each chip model
atmel-hlcdc:
- set LCDC_ATTRE register in plane disable
- set correct values for plane scaler
solomon:
- use drm helper for get_modes and move_valid
sitronix:
- fix output position when clearing screens
qaic:
- support dma-buf exports
- support new firmware's READ_DATA implementation
- sahara AIC200 image table update
- add sysfs support
- add coredump support
- add uevents support
- PM support
sun4i:
- layer refactors to decouple plane from output
- improve DE33 support
vc4:
- switch to generic CEC helpers
komeda:
- use drm_ logging functions
vkms:
- configfs support for display configuration
vgem:
- fix fence timer deadlock
etnaviv:
- add HWDB entry for GC8000 Nano Ultra VIP r6205"
* tag 'drm-next-2025-12-03' of https://gitlab.freedesktop.org/drm/kernel: (1869 commits)
Revert "drm/amd: Skip power ungate during suspend for VPE"
drm/amdgpu: use common defines for HUB faults
drm/amdgpu/gmc12: add amdgpu_vm_handle_fault() handling
drm/amdgpu/gmc11: add amdgpu_vm_handle_fault() handling
drm/amdgpu: use static ids for ACP platform devs
drm/amdgpu/sdma6: Update SDMA 6.0.3 FW version to include UMQ protected-fence fix
drm/amdgpu: Forward VMID reservation errors
drm/amdgpu/gmc8: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc7: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Delegate VM faults to soft IRQ handler ring
drm/amdgpu/gmc6: Cache VM fault info
drm/amdgpu/gmc6: Don't print MC client as it's unknown
drm/amdgpu/cz_ih: Enable soft IRQ handler ring
drm/amdgpu/tonga_ih: Enable soft IRQ handler ring
drm/amdgpu/iceland_ih: Enable soft IRQ handler ring
drm/amdgpu/cik_ih: Enable soft IRQ handler ring
drm/amdgpu/si_ih: Enable soft IRQ handler ring
drm/amd/display: fix typo in display_mode_core_structs.h
drm/amd/display: fix Smart Power OLED not working after S4
drm/amd/display: Move RGB-type check for audio sync to DCE HW sequence
...
Diffstat (limited to 'Documentation/devicetree/bindings')
31 files changed, 1481 insertions, 83 deletions
diff --git a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml index 05442d437755..6211ab8bbb0e 100644 --- a/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml +++ b/Documentation/devicetree/bindings/display/bridge/fsl,imx8mp-hdmi-tx.yaml @@ -49,6 +49,10 @@ properties: $ref: /schemas/graph.yaml#/properties/port description: HDMI output port + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Parallel audio input port + required: - port@0 - port@1 @@ -98,5 +102,13 @@ examples: remote-endpoint = <&hdmi0_con>; }; }; + + port@2 { + reg = <2>; + + endpoint { + remote-endpoint = <&pai_to_hdmi_tx>; + }; + }; }; }; diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml index ba644c30dcf4..17d1f97ce8c2 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml @@ -19,6 +19,7 @@ properties: compatible: enum: - ite,it66121 + - ite,it66122 - ite,it6610 reg: diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml index c167795c63f6..b95f10edd3a2 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.yaml @@ -14,6 +14,9 @@ description: | R-Car Gen4 SoCs. The encoder can operate in either DSI or CSI-2 mode, with up to four data lanes. +allOf: + - $ref: /schemas/display/dsi-controller.yaml# + properties: compatible: enum: @@ -80,14 +83,14 @@ required: - resets - ports -additionalProperties: false +unevaluatedProperties: false examples: - | #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> #include <dt-bindings/power/r8a779a0-sysc.h> - dsi0: dsi-encoder@fed80000 { + dsi@fed80000 { compatible = "renesas,r8a779a0-dsi-csi2-tx"; reg = <0xfed80000 0x10000>; power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; @@ -117,4 +120,51 @@ examples: }; }; }; + + - | + #include <dt-bindings/clock/r8a779g0-cpg-mssr.h> + #include <dt-bindings/power/r8a779g0-sysc.h> + + dsi@fed80000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,r8a779g0-dsi-csi2-tx"; + reg = <0xfed80000 0x10000>; + clocks = <&cpg CPG_MOD 415>, + <&cpg CPG_CORE R8A779G0_CLK_DSIEXT>, + <&cpg CPG_CORE R8A779G0_CLK_DSIREF>; + clock-names = "fck", "dsi", "pll"; + power-domains = <&sysc R8A779G0_PD_ALWAYS_ON>; + resets = <&cpg 415>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + + dsi0port1_out: endpoint { + remote-endpoint = <&panel_in>; + data-lanes = <1 2>; + }; + }; + }; + + panel@0 { + reg = <0>; + compatible = "raspberrypi,dsi-7inch", "ilitek,ili9881c"; + power-supply = <&vcc_lcd_reg>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0port1_out>; + }; + }; + }; + }; ... diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml index 9ef587d46506..20c7e0a77802 100644 --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -27,7 +27,9 @@ properties: - const: adi,adv7123 - enum: - adi,adv7123 + - asl-tek,cs5263 - dumb-vga-dac + - parade,ps185hdm - radxa,ra620 - realtek,rtd2171 - ti,opa362 diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml new file mode 100644 index 000000000000..4f99682a308d --- /dev/null +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx8mp-hdmi-pai.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/imx/fsl,imx8mp-hdmi-pai.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX8MP HDMI Parallel Audio Interface + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +description: + The HDMI TX Parallel Audio Interface (HTX_PAI) is a bridge between the + Audio Subsystem to the HDMI TX Controller. + +properties: + compatible: + const: fsl,imx8mp-hdmi-pai + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: apb + + power-domains: + maxItems: 1 + + port: + $ref: /schemas/graph.yaml#/properties/port + description: Output to the HDMI TX controller. + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - power-domains + - port + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mp-clock.h> + #include <dt-bindings/power/imx8mp-power.h> + + audio-bridge@32fc4800 { + compatible = "fsl,imx8mp-hdmi-pai"; + reg = <0x32fc4800 0x800>; + interrupt-parent = <&irqsteer_hdmi>; + interrupts = <14>; + clocks = <&clk IMX8MP_CLK_HDMI_APB>; + clock-names = "apb"; + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PAI>; + + port { + pai_to_hdmi_tx: endpoint { + remote-endpoint = <&hdmi_tx_from_pai>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml index aeb4e4f36044..ebda78db87a6 100644 --- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml +++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml @@ -18,6 +18,7 @@ properties: compatible: oneOf: - enum: + - qcom,glymur-dp - qcom,sa8775p-dp - qcom,sc7180-dp - qcom,sc7280-dp @@ -33,6 +34,11 @@ properties: - items: - enum: + - qcom,qcs8300-dp + - const: qcom,sa8775p-dp + + - items: + - enum: - qcom,sm6350-dp - const: qcom,sc7180-dp @@ -55,6 +61,12 @@ properties: - items: - enum: + - qcom,sm6150-dp + - const: qcom,sm8150-dp + - const: qcom,sm8350-dp + + - items: + - enum: - qcom,sm8750-dp - const: qcom,sm8650-dp @@ -195,9 +207,11 @@ allOf: compatible: contains: enum: + - qcom,glymur-dp - qcom,sa8775p-dp - qcom,x1e80100-dp then: + $ref: /schemas/sound/dai-common.yaml# oneOf: - required: - aux-bus @@ -239,6 +253,7 @@ allOf: enum: # these platforms support 2 streams MST on some interfaces, # others are SST only + - qcom,glymur-dp - qcom,sc8280xp-dp - qcom,x1e80100-dp then: @@ -295,7 +310,7 @@ allOf: minItems: 6 maxItems: 8 -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml index afc187935744..e32056ae0f5d 100644 --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml @@ -21,7 +21,7 @@ properties: compatible: oneOf: - items: - - pattern: '^qcom,adreno-gmu-[67][0-9][0-9]\.[0-9]$' + - pattern: '^qcom,adreno-gmu-[6-8][0-9][0-9]\.[0-9]$' - const: qcom,adreno-gmu - items: - pattern: '^qcom,adreno-gmu-x[1-9][0-9][0-9]\.[0-9]$' @@ -303,6 +303,64 @@ allOf: properties: compatible: contains: + const: qcom,adreno-gmu-840.1 + then: + properties: + reg: + items: + - description: Core GMU registers + reg-names: + items: + - const: gmu + clocks: + items: + - description: GPU AHB clock + - description: GMU clock + - description: GPU CX clock + - description: GPU MEMNOC clock + - description: GMU HUB clock + clock-names: + items: + - const: ahb + - const: gmu + - const: cxo + - const: memnoc + - const: hub + + - if: + properties: + compatible: + contains: + const: qcom,adreno-gmu-x285.1 + then: + properties: + reg: + items: + - description: Core GMU registers + reg-names: + items: + - const: gmu + clocks: + items: + - description: GPU AHB clock + - description: GMU clock + - description: GPU CX clock + - description: GPU MEMNOC clock + - description: GMU HUB clock + - description: GMU RSCC HUB clock + clock-names: + items: + - const: ahb + - const: gmu + - const: cxo + - const: memnoc + - const: hub + - const: rscc + + - if: + properties: + compatible: + contains: const: qcom,adreno-gmu-wrapper then: properties: diff --git a/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml new file mode 100644 index 000000000000..2329ed96e6cb --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,glymur-mdss.yaml @@ -0,0 +1,264 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,glymur-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Glymur Display MDSS + +maintainers: + - Abel Vesa <abel.vesa@linaro.org> + +description: + Glymur MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DP interfaces, etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,glymur-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + items: + - description: Interconnect path from mdp0 port to the data bus + - description: Interconnect path from CPU to the reg bus + + interconnect-names: + items: + - const: mdp0-mem + - const: cpu-cfg + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,glymur-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,glymur-dp + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + const: qcom,glymur-dp-phy + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interconnect/qcom,icc.h> + #include <dt-bindings/interconnect/qcom,glymur-rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/phy/phy-qcom-qmp.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + + display-subsystem@ae00000 { + compatible = "qcom,glymur-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + + clocks = <&dispcc_ahb_clk>, + <&gcc_disp_hf_axi_clk>, + <&dispcc_mdp_clk>; + clock-names = "bus", "nrt_bus", "core"; + + interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, + <&hsc_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "cpu-cfg"; + + resets = <&disp_cc_mdss_core_bcr>; + + power-domains = <&mdss_gdsc>; + + iommus = <&apps_smmu 0x1c00 0x2>; + + interrupt-controller; + #interrupt-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,glymur-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc_axi_clk>, + <&dispcc_ahb_clk>, + <&dispcc_mdp_lut_clk>, + <&dispcc_mdp_clk>, + <&dispcc_mdp_vsync_clk>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc_mdp_vsync_clk>; + assigned-clock-rates = <19200000>; + + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + dpu_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-325000000 { + opp-hz = /bits/ 64 <325000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-514000000 { + opp-hz = /bits/ 64 <514000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + displayport-controller@ae90000 { + compatible = "qcom,glymur-dp"; + reg = <0xae90000 0x200>, + <0xae90200 0x200>, + <0xae90400 0x600>, + <0xae91000 0x400>, + <0xae91400 0x400>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + + clocks = <&dispcc_mdss_ahb_clk>, + <&dispcc_dptx0_aux_clk>, + <&dispcc_dptx0_link_clk>, + <&dispcc_dptx0_link_intf_clk>, + <&dispcc_dptx0_pixel0_clk>, + <&dispcc_dptx0_pixel1_clk>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel"; + + assigned-clocks = <&dispcc_mdss_dptx0_link_clk_src>, + <&dispcc_mdss_dptx0_pixel0_clk_src>, + <&dispcc_mdss_dptx0_pixel1_clk_src>; + assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>, + <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>; + + operating-points-v2 = <&mdss_dp0_opp_table>; + + power-domains = <&rpmhpd RPMHPD_MMCX>; + + phys = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_PHY>; + phy-names = "dp"; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&mdss_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp0_out: endpoint { + }; + }; + }; + + mdss_dp0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml new file mode 100644 index 000000000000..e96baaae9ba9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml @@ -0,0 +1,286 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/qcom,qcs8300-mdss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. QCS8300 Display MDSS + +maintainers: + - Yongxing Mou <yongxing.mou@oss.qualcomm.com> + +description: + QCS8300 MSM Mobile Display Subsystem(MDSS), which encapsulates sub-blocks like + DPU display controller, DP interfaces and EDP etc. + +$ref: /schemas/display/msm/mdss-common.yaml# + +properties: + compatible: + const: qcom,qcs8300-mdss + + clocks: + items: + - description: Display AHB + - description: Display hf AXI + - description: Display core + + iommus: + maxItems: 1 + + interconnects: + maxItems: 3 + + interconnect-names: + maxItems: 3 + +patternProperties: + "^display-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,qcs8300-dpu + + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + + properties: + compatible: + contains: + const: qcom,qcs8300-dp + + "^phy@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,qcs8300-edp-phy + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interconnect/qcom,icc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,qcs8300-gcc.h> + #include <dt-bindings/clock/qcom,sa8775p-dispcc.h> + #include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h> + #include <dt-bindings/power/qcom,rpmhpd.h> + #include <dt-bindings/power/qcom-rpmpd.h> + + mdss: display-subsystem@ae00000 { + compatible = "qcom,qcs8300-mdss"; + reg = <0x0ae00000 0x1000>; + reg-names = "mdss"; + + interconnects = <&mmss_noc MASTER_MDP0 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_MDP1 QCOM_ICC_TAG_ACTIVE_ONLY + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>, + <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>; + interconnect-names = "mdp0-mem", + "mdp1-mem", + "cpu-cfg"; + + resets = <&dispcc_core_bcr>; + power-domains = <&dispcc_gdsc>; + + clocks = <&dispcc_ahb_clk>, + <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc_mdp_clk>; + + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <1>; + + iommus = <&apps_smmu 0x1000 0x402>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + display-controller@ae01000 { + compatible = "qcom,qcs8300-dpu", "qcom,sa8775p-dpu"; + reg = <0x0ae01000 0x8f000>, + <0x0aeb0000 0x2008>; + reg-names = "mdp", "vbif"; + + clocks = <&gcc GCC_DISP_HF_AXI_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>; + clock-names = "nrt_bus", + "iface", + "lut", + "core", + "vsync"; + + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>; + assigned-clock-rates = <19200000>; + operating-points-v2 = <&mdp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + interrupt-parent = <&mdss>; + interrupts = <0>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + dpu_intf0_out: endpoint { + remote-endpoint = <&mdss_dp0_in>; + }; + }; + }; + + mdp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-375000000 { + opp-hz = /bits/ 64 <375000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-500000000 { + opp-hz = /bits/ 64 <500000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + + opp-575000000 { + opp-hz = /bits/ 64 <575000000>; + required-opps = <&rpmhpd_opp_turbo>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + required-opps = <&rpmhpd_opp_turbo_l1>; + }; + }; + }; + + mdss_dp0_phy: phy@aec2a00 { + compatible = "qcom,qcs8300-edp-phy", "qcom,sa8775p-edp-phy"; + + reg = <0x0aec2a00 0x200>, + <0x0aec2200 0xd0>, + <0x0aec2600 0xd0>, + <0x0aec2000 0x1c8>; + + clocks = <&dispcc MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc MDSS_DISP_CC_MDSS_AHB_CLK>; + clock-names = "aux", + "cfg_ahb"; + + #clock-cells = <1>; + #phy-cells = <0>; + + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l4a>; + }; + + displayport-controller@af54000 { + compatible = "qcom,qcs8300-dp", "qcom,sa8775p-dp"; + + pinctrl-0 = <&dp_hot_plug_det>; + pinctrl-names = "default"; + + reg = <0xaf54000 0x104>, + <0xaf54200 0x0c0>, + <0xaf55000 0x770>, + <0xaf56000 0x09c>, + <0xaf57000 0x09c>, + <0xaf58000 0x09c>, + <0xaf59000 0x09c>, + <0xaf5a000 0x23c>, + <0xaf5b000 0x23c>; + + interrupt-parent = <&mdss>; + interrupts = <12>; + clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>; + clock-names = "core_iface", + "core_aux", + "ctrl_link", + "ctrl_link_iface", + "stream_pixel", + "stream_1_pixel", + "stream_2_pixel", + "stream_3_pixel"; + assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>, + <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>; + assigned-clock-parents = <&mdss_dp0_phy 0>, + <&mdss_dp0_phy 1>, + <&mdss_dp0_phy 1>, + <&mdss_dp0_phy 1>; + phys = <&mdss_dp0_phy>; + phy-names = "dp"; + operating-points-v2 = <&dp_opp_table>; + power-domains = <&rpmhpd RPMHPD_MMCX>; + + #sound-dai-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + mdss_dp0_in: endpoint { + remote-endpoint = <&dpu_intf0_out>; + }; + }; + + port@1 { + reg = <1>; + + mdss_dp_out: endpoint { }; + }; + }; + + dp_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-160000000 { + opp-hz = /bits/ 64 <160000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-270000000 { + opp-hz = /bits/ 64 <270000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-540000000 { + opp-hz = /bits/ 64 <540000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-810000000 { + opp-hz = /bits/ 64 <810000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml index 9ac24f99d3ad..46e9335f849f 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm6150-mdss.yaml @@ -51,6 +51,14 @@ patternProperties: compatible: const: qcom,sm6150-dpu + "^displayport-controller@[0-9a-f]+$": + type: object + additionalProperties: true + properties: + compatible: + contains: + const: qcom,sm6150-dp + "^dsi@[0-9a-f]+$": type: object additionalProperties: true @@ -130,35 +138,37 @@ examples: #size-cells = <0>; port@0 { - reg = <0>; - dpu_intf0_out: endpoint { - }; + reg = <0>; + + dpu_intf0_out: endpoint { + }; }; port@1 { - reg = <1>; - dpu_intf1_out: endpoint { - remote-endpoint = <&mdss_dsi0_in>; - }; + reg = <1>; + + dpu_intf1_out: endpoint { + remote-endpoint = <&mdss_dsi0_in>; + }; }; }; mdp_opp_table: opp-table { compatible = "operating-points-v2"; - opp-19200000 { - opp-hz = /bits/ 64 <19200000>; - required-opps = <&rpmhpd_opp_low_svs>; + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmhpd_opp_low_svs>; }; - opp-25600000 { - opp-hz = /bits/ 64 <25600000>; - required-opps = <&rpmhpd_opp_svs>; + opp-256000000 { + opp-hz = /bits/ 64 <256000000>; + required-opps = <&rpmhpd_opp_svs>; }; opp-307200000 { - opp-hz = /bits/ 64 <307200000>; - required-opps = <&rpmhpd_opp_nom>; + opp-hz = /bits/ 64 <307200000>; + required-opps = <&rpmhpd_opp_nom>; }; }; }; diff --git a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml index 0a46120dd868..fe296e3186d0 100644 --- a/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml +++ b/Documentation/devicetree/bindings/display/msm/qcom,sm8650-dpu.yaml @@ -13,11 +13,17 @@ $ref: /schemas/display/msm/dpu-common.yaml# properties: compatible: - enum: - - qcom,sa8775p-dpu - - qcom,sm8650-dpu - - qcom,sm8750-dpu - - qcom,x1e80100-dpu + oneOf: + - enum: + - qcom,glymur-dpu + - qcom,sa8775p-dpu + - qcom,sm8650-dpu + - qcom,sm8750-dpu + - qcom,x1e80100-dpu + - items: + - enum: + - qcom,qcs8300-dpu + - const: qcom,sa8775p-dpu reg: items: diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml new file mode 100644 index 000000000000..02f7fb1f16dc --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/ilitek,il79900a.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/ilitek,il79900a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek IL79900a based MIPI-DSI panels + +maintainers: + - Langyan Ye <yelangyan@huaqin.corp-partner.google.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + - tianma,tl121bvms07-00 + - const: ilitek,il79900a + + reg: + maxItems: 1 + description: DSI virtual channel used by the panel + + enable-gpios: + maxItems: 1 + description: GPIO specifier for the enable pin + + avdd-supply: + description: Positive analog voltage supply (AVDD) + + avee-supply: + description: Negative analog voltage supply (AVEE) + + pp1800-supply: + description: 1.8V logic voltage supply + + backlight: true + +required: + - compatible + - reg + - enable-gpios + - avdd-supply + - avee-supply + - pp1800-supply + +additionalProperties: false + +examples: + - | + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "tianma,tl121bvms07-00", "ilitek,il79900a"; + reg = <0>; + enable-gpios = <&pio 25 0>; + avdd-supply = <®_avdd>; + avee-supply = <®_avee>; + pp1800-supply = <®_pp1800>; + backlight = <&backlight>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml index 434cc6af9c95..d979701a00a8 100644 --- a/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml +++ b/Documentation/devicetree/bindings/display/panel/ilitek,ili9881c.yaml @@ -20,9 +20,11 @@ properties: - bananapi,lhr050h41 - bestar,bsd1218-a101kl68 - feixin,k101-im2byl02 + - raspberrypi,dsi-5inch - raspberrypi,dsi-7inch - startek,kd050hdfia020 - tdo,tl050hdv35 + - wanchanglong,w552946aaa - wanchanglong,w552946aba - const: ilitek,ili9881c @@ -30,6 +32,7 @@ properties: maxItems: 1 backlight: true + port: true power-supply: true reset-gpios: true rotation: true diff --git a/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml new file mode 100644 index 000000000000..0f0b9079f199 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lg,ld070wx3-sl01.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/lg,ld070wx3-sl01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LG Corporation 7" WXGA TFT LCD panel + +maintainers: + - Svyatoslav Ryhel <clamor95@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - const: lg,ld070wx3-sl01 + + reg: + maxItems: 1 + + vdd-supply: true + vcc-supply: true + + backlight: true + port: true + +required: + - compatible + - vdd-supply + - vcc-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "lg,ld070wx3-sl01"; + reg = <0>; + + vdd-supply = <&vdd_3v3_lcd>; + vcc-supply = <&vcc_1v8_lcd>; + + backlight = <&backlight>; + + port { + endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml index 4388d5375851..dbc01e640895 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-lvds.yaml @@ -59,6 +59,8 @@ properties: # Jenson Display BL-JT60050-01A 7" WSVGA (1024x600) color TFT LCD LVDS panel - jenson,bl-jt60050-01a - tbs,a711-panel + # Winstar WF70A8SYJHLNGA 7" WSVGA (1024x600) color TFT LCD LVDS panel + - winstar,wf70a8syjhlnga - const: panel-lvds diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml index 9b92a05791cc..8d668979b62d 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml @@ -19,6 +19,9 @@ description: | If the panel is more advanced a dedicated binding file is required. +allOf: + - $ref: panel-common.yaml# + properties: compatible: @@ -42,8 +45,6 @@ properties: - kingdisplay,kd097d04 # LG ACX467AKM-7 4.95" 1080×1920 LCD Panel - lg,acx467akm-7 - # LG Corporation 7" WXGA TFT LCD panel - - lg,ld070wx3-sl01 # LG Corporation 5" HD TFT LCD panel - lg,lh500wx1-sd03 # Lincoln LCD197 5" 1080x1920 LCD panel @@ -56,10 +57,6 @@ properties: - panasonic,vvx10f034n00 # Samsung s6e3fa7 1080x2220 based AMS559NK06 AMOLED panel - samsung,s6e3fa7-ams559nk06 - # Samsung s6e3fc2x01 1080x2340 AMOLED panel - - samsung,s6e3fc2x01 - # Samsung sofef00 1080x2280 AMOLED panel - - samsung,sofef00 # Shangai Top Display Optoelectronics 7" TL070WSH30 1024x600 TFT LCD panel - tdo,tl070wsh30 @@ -72,31 +69,12 @@ properties: reset-gpios: true port: true power-supply: true - vddio-supply: true - -allOf: - - $ref: panel-common.yaml# - - if: - properties: - compatible: - enum: - - samsung,s6e3fc2x01 - - samsung,sofef00 - then: - properties: - power-supply: false - required: - - vddio-supply - else: - properties: - vddio-supply: false - required: - - power-supply additionalProperties: false required: - compatible + - power-supply - reg examples: diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml index 2017428d8828..24e277b19094 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml @@ -184,6 +184,8 @@ properties: - innolux,n156bge-l21 # Innolux Corporation 7.0" WSVGA (1024x600) TFT LCD panel - innolux,zj070na-01p + # JuTouch Technology Co.. 10" JT101TM023 WXGA (1280 x 800) LVDS panel + - jutouch,jt101tm023 # Kaohsiung Opto-Electronics Inc. 5.7" QVGA (320 x 240) TFT LCD panel - koe,tx14d24vm1bpa # Kaohsiung Opto-Electronics. TX31D200VM0BAA 12.3" HSXGA LVDS panel @@ -268,6 +270,8 @@ properties: - qiaodian,qd43003c0-40 # Shenzhen QiShenglong Industrialist Co., Ltd. Gopher 2b 4.3" 480(RGB)x272 TFT LCD panel - qishenglong,gopher2b-lcd + # Raystar Optronics, Inc. RFF500F-AWH-DNN 5.0" TFT 840x480 + - raystar,rff500f-awh-dnn # Rocktech Displays Ltd. RK101II01D-CT 10.1" TFT 1280x800 - rocktech,rk101ii01d-ct # Rocktech Display Ltd. RK070ER9427 800(RGB)x480 TFT LCD panel @@ -276,6 +280,8 @@ properties: - rocktech,rk043fn48h # Samsung Electronics 10.1" WXGA (1280x800) TFT LCD panel - samsung,ltl101al01 + # Samsung Electronics 10.6" FWXGA (1366x768) TFT LCD panel + - samsung,ltl106al01 # Samsung Electronics 10.1" WSVGA TFT LCD panel - samsung,ltn101nt05 # Satoz SAT050AT40H12R2 5.0" WVGA TFT LCD panel diff --git a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml index 04f86e0cbac9..694037301583 100644 --- a/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml +++ b/Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml @@ -9,6 +9,9 @@ title: Ronbo RB070D30 DSI Display Panel maintainers: - Maxime Ripard <mripard@kernel.org> +allOf: + - $ref: panel-common.yaml# + properties: compatible: const: ronbo,rb070d30 @@ -20,10 +23,6 @@ properties: description: GPIO used for the power pin maxItems: 1 - reset-gpios: - description: GPIO used for the reset pin - maxItems: 1 - shlr-gpios: description: GPIO used for the shlr pin (horizontal flip) maxItems: 1 @@ -35,10 +34,6 @@ properties: vcc-lcd-supply: description: Power regulator - backlight: - description: Backlight used by the panel - $ref: /schemas/types.yaml#/definitions/phandle - required: - compatible - power-gpios @@ -47,5 +42,6 @@ required: - shlr-gpios - updn-gpios - vcc-lcd-supply + - port -additionalProperties: false +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml index ccb574caed28..f1723e910252 100644 --- a/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml +++ b/Documentation/devicetree/bindings/display/panel/samsung,atna33xc20.yaml @@ -33,6 +33,8 @@ properties: - samsung,atna45dc02 # Samsung 15.6" 3K (2880x1620 pixels) eDP AMOLED panel - samsung,atna56ac03 + # Samsung 16.0" 3K (2880x1800 pixels) eDP AMOLED panel + - samsung,atna60cl08 - const: samsung,atna33xc20 enable-gpios: true diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml new file mode 100644 index 000000000000..d48354fb52ea --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e3fc2x01.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,s6e3fc2x01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung S6E3FC2X01 AMOLED DDIC + +description: The S6E3FC2X01 is display driver IC with connected panel. + +maintainers: + - David Heidelberg <david@ixit.cz> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + # Samsung 6.41 inch, 1080x2340 pixels, 19.5:9 ratio + - samsung,s6e3fc2x01-ams641rw + - const: samsung,s6e3fc2x01 + + reg: + maxItems: 1 + + reset-gpios: true + + port: true + + vddio-supply: + description: VDD regulator + + vci-supply: + description: VCI regulator + + poc-supply: + description: POC regulator + +required: + - compatible + - reset-gpios + - vddio-supply + - vci-supply + - poc-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,s6e3fc2x01-ams641rw", "samsung,s6e3fc2x01"; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + vci-supply = <&s2dos05_buck1>; + poc-supply = <&s2dos05_ldo1>; + + te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>; + pinctrl-1 = <&sde_dsi_suspend &sde_te_active_sleep>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml b/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml new file mode 100644 index 000000000000..eeee3cac72e3 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,sofef00.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/samsung,sofef00.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SOFEF00 AMOLED DDIC + +description: The SOFEF00 is display driver IC with connected panel. + +maintainers: + - David Heidelberg <david@ixit.cz> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + items: + - enum: + # Samsung 6.01 inch, 1080x2160 pixels, 18:9 ratio + - samsung,sofef00-ams601nt22 + # Samsung 6.28 inch, 1080x2280 pixels, 19:9 ratio + - samsung,sofef00-ams628nw01 + - const: samsung,sofef00 + + reg: + maxItems: 1 + + poc-supply: + description: POC regulator + + vci-supply: + description: VCI regulator + + vddio-supply: + description: VDD regulator + +required: + - compatible + - reset-gpios + - poc-supply + - vci-supply + - vddio-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "samsung,sofef00-ams628nw01", "samsung,sofef00"; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + vci-supply = <&s2dos05_buck1>; + poc-supply = <&s2dos05_ldo1>; + + te-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&panel_active>; + pinctrl-1 = <&panel_suspend>; + pinctrl-names = "default", "sleep"; + + port { + panel_in: endpoint { + remote-endpoint = <&mdss_dsi0_out>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml new file mode 100644 index 000000000000..08a35ebbbb3c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/sharp,lq079l1sx01.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/sharp,lq079l1sx01.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sharp Microelectronics 7.9" WQXGA TFT LCD panel + +maintainers: + - Svyatoslav Ryhel <clamor95@gmail.com> + +description: > + This panel requires a dual-channel DSI host to operate and it supports + only left-right split mode, where each channel drives the left or right + half of the screen and only video mode. + + Each of the DSI channels controls a separate DSI peripheral. + The peripheral driven by the first link (DSI-LINK1), left one, is + considered the primary peripheral and controls the device. + +allOf: + - $ref: panel-common-dual.yaml# + +properties: + compatible: + const: sharp,lq079l1sx01 + + reg: + maxItems: 1 + + avdd-supply: + description: regulator that supplies the analog voltage + + vddio-supply: + description: regulator that supplies the I/O voltage + + vsp-supply: + description: positive boost supply regulator + + vsn-supply: + description: negative boost supply regulator + + reset-gpios: + maxItems: 1 + + backlight: true + ports: true + +required: + - compatible + - reg + - avdd-supply + - vddio-supply + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "sharp,lq079l1sx01"; + reg = <0>; + + reset-gpios = <&gpio 59 GPIO_ACTIVE_LOW>; + + avdd-supply = <&avdd_lcd>; + vddio-supply = <&vdd_lcd_io>; + vsp-supply = <&vsp_5v5_lcd>; + vsn-supply = <&vsn_5v5_lcd>; + + backlight = <&backlight>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + panel_in0: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + panel_in1: endpoint { + remote-endpoint = <&dsi1_out>; + }; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml b/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml new file mode 100644 index 000000000000..152d94367130 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/synaptics,td4300-panel.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/synaptics,td4300-panel.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics TDDI Display Panel Controller + +maintainers: + - Kaustabh Chakraborty <kauschluss@disroot.org> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + enum: + - syna,td4101-panel + - syna,td4300-panel + + reg: + maxItems: 1 + + vio-supply: + description: core I/O voltage supply + + vsn-supply: + description: negative voltage supply for analog circuits + + vsp-supply: + description: positive voltage supply for analog circuits + + backlight-gpios: + maxItems: 1 + description: backlight enable GPIO + + reset-gpios: true + width-mm: true + height-mm: true + panel-timing: true + +required: + - compatible + - reg + - width-mm + - height-mm + - panel-timing + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "syna,td4300-panel"; + reg = <0>; + + vio-supply = <&panel_vio_reg>; + vsn-supply = <&panel_vsn_reg>; + vsp-supply = <&panel_vsp_reg>; + + backlight-gpios = <&gpd3 5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpd3 4 GPIO_ACTIVE_LOW>; + + width-mm = <68>; + height-mm = <121>; + + panel-timing { + clock-frequency = <144389520>; + + hactive = <1080>; + hsync-len = <4>; + hfront-porch = <120>; + hback-porch = <32>; + + vactive = <1920>; + vsync-len = <2>; + vfront-porch = <21>; + vback-porch = <4>; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml index 1e32d14b6edb..2cc66dcef870 100644 --- a/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,rzg2l-du.yaml @@ -25,6 +25,9 @@ properties: - enum: - renesas,r9a07g054-du # RZ/V2L - const: renesas,r9a07g044-du # RZ/G2L fallback + - items: + - const: renesas,r9a09g056-du # RZ/V2N + - const: renesas,r9a09g057-du # RZ/V2H(P) fallback reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml index c59df3c1a3f7..632b48bfabb9 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-mipi-dsi.yaml @@ -17,6 +17,7 @@ properties: - rockchip,px30-mipi-dsi - rockchip,rk3128-mipi-dsi - rockchip,rk3288-mipi-dsi + - rockchip,rk3368-mipi-dsi - rockchip,rk3399-mipi-dsi - rockchip,rk3568-mipi-dsi - rockchip,rv1126-mipi-dsi @@ -73,6 +74,7 @@ allOf: enum: - rockchip,px30-mipi-dsi - rockchip,rk3128-mipi-dsi + - rockchip,rk3368-mipi-dsi - rockchip,rk3568-mipi-dsi - rockchip,rv1126-mipi-dsi diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml index 96b4b088eebe..d649808c59da 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3588-dw-hdmi-qp.yaml @@ -113,6 +113,14 @@ properties: description: Additional HDMI QP related data is accessed through VO GRF regs. + frl-enable-gpios: + description: + Optional GPIO line to be asserted when operating in HDMI 2.1 FRL mode and + deasserted for HDMI 1.4/2.0 TMDS. It can be used to control external + voltage bias for HDMI data lines. When not present the HDMI encoder will + operate in TMDS mode only. + maxItems: 1 + required: - compatible - reg @@ -132,8 +140,10 @@ unevaluatedProperties: false examples: - | #include <dt-bindings/clock/rockchip,rk3588-cru.h> + #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/power/rk3588-power.h> #include <dt-bindings/reset/rockchip,rk3588-cru.h> @@ -164,6 +174,7 @@ examples: rockchip,grf = <&sys_grf>; rockchip,vo-grf = <&vo1_grf>; #sound-dai-cells = <0>; + frl-enable-gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_LOW>; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml index a5b4e0021758..bee9faf1d3f8 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml +++ b/Documentation/devicetree/bindings/gpu/arm,mali-valhall-csf.yaml @@ -18,6 +18,8 @@ properties: oneOf: - items: - enum: + - mediatek,mt8196-mali + - nxp,imx95-mali # G310 - rockchip,rk3588-mali - const: arm,mali-valhall-csf # Mali Valhall GPU model/revision is fully discoverable @@ -44,7 +46,9 @@ properties: minItems: 1 items: - const: core - - const: coregroup + - enum: + - coregroup + - stacks - const: stacks mali-supply: true @@ -91,7 +95,6 @@ required: - interrupts - interrupt-names - clocks - - mali-supply additionalProperties: false @@ -108,6 +111,29 @@ allOf: power-domains: maxItems: 1 power-domain-names: false + required: + - mali-supply + - if: + properties: + compatible: + contains: + const: mediatek,mt8196-mali + then: + properties: + mali-supply: false + sram-supply: false + operating-points-v2: false + power-domains: + maxItems: 1 + power-domain-names: false + clocks: + maxItems: 2 + clock-names: + items: + - const: core + - const: stacks + required: + - power-domains examples: - | @@ -143,5 +169,17 @@ examples: }; }; }; + - | + gpu@48000000 { + compatible = "mediatek,mt8196-mali", "arm,mali-valhall-csf"; + reg = <0x48000000 0x480000>; + clocks = <&gpufreq 0>, <&gpufreq 1>; + clock-names = "core", "stacks"; + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "job", "mmu", "gpu"; + power-domains = <&gpufreq>; + }; ... diff --git a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml index c87d7bece0ec..225a6e1b7fcd 100644 --- a/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml +++ b/Documentation/devicetree/bindings/gpu/img,powervr-rogue.yaml @@ -15,6 +15,16 @@ properties: oneOf: - items: - enum: + - renesas,r8a7796-gpu + - renesas,r8a77961-gpu + - const: img,img-gx6250 + - const: img,img-rogue + - items: + - const: renesas,r8a77965-gpu + - const: img,img-ge7800 + - const: img,img-rogue + - items: + - enum: - ti,am62-gpu - const: img,img-axe-1-16m # This deprecated element must be kept around to allow old kernels to @@ -86,48 +96,56 @@ allOf: properties: compatible: contains: - const: img,img-axe-1-16m + enum: + - ti,am62-gpu + - ti,j721s2-gpu then: properties: - power-domains: - items: - - description: Power domain A - power-domain-names: + clocks: maxItems: 1 - required: - - power-domains - - power-domain-names - if: properties: compatible: contains: - const: thead,th1520-gpu + enum: + - img,img-ge7800 + - img,img-gx6250 + - thead,th1520-gpu then: properties: clocks: minItems: 3 clock-names: minItems: 3 + + - if: + properties: + compatible: + contains: + const: img,img-axe-1-16m + then: + properties: power-domains: - items: - - description: The single, unified power domain for the GPU on the - TH1520 SoC, integrating all internal IP power domains. - power-domain-names: false + maxItems: 1 + power-domain-names: + maxItems: 1 required: - power-domains + - power-domain-names - if: properties: compatible: contains: - const: img,img-bxs-4-64 + enum: + - img,img-bxs-4-64 + - img,img-ge7800 + - img,img-gx6250 then: properties: power-domains: - items: - - description: Power domain A - - description: Power domain B + minItems: 2 power-domain-names: minItems: 2 required: @@ -138,13 +156,16 @@ allOf: properties: compatible: contains: - enum: - - ti,am62-gpu - - ti,j721s2-gpu + const: thead,th1520-gpu then: properties: - clocks: - maxItems: 1 + power-domains: + items: + - description: The single, unified power domain for the GPU on the + TH1520 SoC, integrating all internal IP power domains. + power-domain-names: false + required: + - power-domains examples: - | diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index 89495f094d52..c9efdd1a6d1c 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -89,6 +89,8 @@ properties: - description: Qcom Adreno GPUs implementing "qcom,smmu-500" and "arm,mmu-500" items: - enum: + - qcom,glymur-smmu-500 + - qcom,kaanapali-smmu-500 - qcom,milos-smmu-500 - qcom,qcm2290-smmu-500 - qcom,qcs615-smmu-500 diff --git a/Documentation/devicetree/bindings/npu/arm,ethos.yaml b/Documentation/devicetree/bindings/npu/arm,ethos.yaml new file mode 100644 index 000000000000..716c4997f976 --- /dev/null +++ b/Documentation/devicetree/bindings/npu/arm,ethos.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/npu/arm,ethos.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Ethos U65/U85 + +maintainers: + - Rob Herring <robh@kernel.org> + +description: > + The Arm Ethos-U NPUs are designed for IoT inference applications. The NPUs + can accelerate 8-bit and 16-bit integer quantized networks: + + Transformer networks (U85 only) + Convolutional Neural Networks (CNN) + Recurrent Neural Networks (RNN) + + Further documentation is available here: + + U65 TRM: https://developer.arm.com/documentation/102023/ + U85 TRM: https://developer.arm.com/documentation/102685/ + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx93-npu + - const: arm,ethos-u65 + - items: + - {} + - const: arm,ethos-u85 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 2 + + clock-names: + items: + - const: core + - const: apb + + power-domains: + maxItems: 1 + + sram: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/imx93-clock.h> + + npu@4a900000 { + compatible = "fsl,imx93-npu", "arm,ethos-u65"; + reg = <0x4a900000 0x1000>; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&mlmix>; + clocks = <&clk IMX93_CLK_ML>, <&clk IMX93_CLK_ML_APB>; + clock-names = "core", "apb"; + sram = <&sram>; + }; +... diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index beab81e462d2..f2ae0c538e48 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -176,6 +176,8 @@ patternProperties: description: All Sensors Corporation "^asix,.*": description: ASIX Electronics Corporation + "^asl-tek,.*": + description: ASL Xiamen Technology Co., Ltd. "^aspeed,.*": description: ASPEED Technology Inc. "^asrock,.*": @@ -835,6 +837,8 @@ patternProperties: description: JOZ BV "^jty,.*": description: JTY + "^jutouch,.*": + description: JuTouch Technology Co., Ltd. "^kam,.*": description: Kamstrup A/S "^karo,.*": @@ -1323,6 +1327,8 @@ patternProperties: description: Raumfeld GmbH "^raydium,.*": description: Raydium Semiconductor Corp. + "^raystar,.*": + description: Raystar Optronics, Inc. "^rda,.*": description: Unisoc Communications, Inc. "^realtek,.*": |