Merge tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "DT Bindings:

   - Convert all remaining interrupt-controller bindings to DT schema

   - Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
     PMC, imx-drm, and ftm-quaddec to DT schema

   - Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
     maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard

   - Add top-level constraints for renesas,vsp1 and renesas,fcp

   - Add missing constraint in amlogic,pinctrl-a4 'group' nodes

   - Adjust the allowed properties for dwc3-xilinx, sony,imx219,
     pci-iommu, and renesas,dsi

   - Add EcoNet vendor prefix

   - Fix the reserved-memory.yaml in fsl,qman-fqd

   - Drop obsolete numa.txt and cpu-topology.txt which are schemas in
     dtschema now

   - Drop Renesas RZ/N1S bindings

   - Ensure Arm cpu nodes don't allow undocumented properties. Add all
     the properties which are in use and undocumented. Drop the Mediatek
     cpufreq binding which is not a binding, but just what DT properties
     the driver uses.

   - Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU

   - Update documentation on defining child nodes with separate schemas

   - Add bindings to PSCI MAINTAINERS entry

  DT core:

   - Add new functions to simplify driver handling of 'memory-region'
     properties. Users to be added next cycle.

   - Simplify of_dma_set_restricted_buffer() to use
     of_for_each_phandle()

   - Add missing unlock on error in unittest_data_add()"

* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
  dt-bindings: timer: Add fsl,vf610-pit.yaml
  dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
  ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
  dt-bindings: arm/cpus: Allow 2 power-domains entries
  dt-bindings: usb: dwc3-xilinx: allow dma-coherent
  media: dt-bindings: sony,imx219: Allow props from video-interface-devices
  dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
  dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
  dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
  dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
  dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
  dt-bindings: trivial-devices: Add VZ89TE to trivial
  media: dt-bindings: renesas,vsp1: add top-level constraints
  media: dt-bindings: renesas,fcp: add top-level constraints
  dt-bindings: trivial-devices: Add Maxim max30208
  dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
  dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
  dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
  dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
  dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
  ...

13 files changed, 788 insertions, 398 deletions

diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
index e08c24633926..5a99d9b9635e 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,dsi.yaml
@@ -128,7 +128,7 @@ required:
   - power-domains
   - ports
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
@@ -180,4 +180,69 @@ examples:
             };
         };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi1: dsi@10860000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        compatible = "renesas,r9a07g044-mipi-dsi", "renesas,rzg2l-mipi-dsi";
+        reg = <0x10860000 0x20000>;
+        interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "seq0", "seq1", "vin1", "rcv",
+                          "ferr", "ppi", "debug";
+        clocks = <&cpg CPG_MOD R9A07G044_MIPI_DSI_PLLCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_SYSCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_PCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_VCLK>,
+                 <&cpg CPG_MOD R9A07G044_MIPI_DSI_LPCLK>;
+        clock-names = "pllclk", "sysclk", "aclk", "pclk", "vclk", "lpclk";
+        resets = <&cpg R9A07G044_MIPI_DSI_CMN_RSTB>,
+                 <&cpg R9A07G044_MIPI_DSI_ARESET_N>,
+                 <&cpg R9A07G044_MIPI_DSI_PRESET_N>;
+        reset-names = "rst", "arst", "prst";
+        power-domains = <&cpg>;
+
+        panel@0 {
+            compatible = "rocktech,jh057n00900";
+            reg = <0>;
+            vcc-supply = <&reg_2v8_p>;
+            iovcc-supply = <&reg_1v8_p>;
+            reset-gpios = <&gpio3 13 GPIO_ACTIVE_LOW>;
+
+            port {
+                panel_in: endpoint {
+                    remote-endpoint = <&dsi1_out>;
+                };
+            };
+        };
+
+        ports {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            port@0 {
+                reg = <0>;
+                dsi1_in: endpoint {
+                    remote-endpoint = <&du_out_dsi1>;
+                };
+            };
+
+            port@1 {
+                reg = <1>;
+                dsi1_out: endpoint {
+                    data-lanes = <1 2 3 4>;
+                    remote-endpoint = <&panel_in>;
+                };
+            };
+        };
+    };
 ...
diff --git a/Documentation/devicetree/bindings/display/fsl,tcon.txt b/Documentation/devicetree/bindings/display/fsl,tcon.txt
deleted file mode 100644
index 475008747801..000000000000
--- a/Documentation/devicetree/bindings/display/fsl,tcon.txt
+++ /dev/null
@@ -1,17 +0,0 @@
-Device Tree bindings for Freescale TCON Driver
-
-Required properties:
-- compatible:		Should be one of
-	* "fsl,vf610-tcon".
-
-- reg:			Address and length of the register set for tcon.
-- clocks:		From common clock binding: handle to tcon ipg clock.
-- clock-names:		From common clock binding: Shall be "ipg".
-
-Examples:
-timing-controller@4003d000 {
-	compatible = "fsl,vf610-tcon";
-	reg = <0x4003d000 0x1000>;
-	clocks = <&clks VF610_CLK_TCON0>;
-	clock-names = "ipg";
-};
diff --git a/Documentation/devicetree/bindings/display/fsl,vf610-tcon.yaml b/Documentation/devicetree/bindings/display/fsl,vf610-tcon.yaml
new file mode 100644
index 000000000000..06bd680524a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/fsl,vf610-tcon.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/fsl,vf610-tcon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale TCON
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,vf610-tcon
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: ipg
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    timing-controller@4003d000 {
+        compatible = "fsl,vf610-tcon";
+        reg = <0x4003d000 0x1000>;
+        clocks = <&clks VF610_CLK_TCON0>;
+        clock-names = "ipg";
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-display-subsystem.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx-display-subsystem.yaml
new file mode 100644
index 000000000000..92a0a797d099
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-display-subsystem.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx-display-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX DRM master device
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+description:
+  The freescale i.MX DRM master device is a virtual device needed to list all
+  IPU or other display interface nodes that comprise the graphics subsystem.
+
+properties:
+  compatible:
+    const: fsl,imx-display-subsystem
+
+  ports:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should contain a list of phandles pointing to camera
+      sensor interface ports of IPU devices.
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    display-subsystem {
+        compatible = "fsl,imx-display-subsystem";
+        ports = <&ipu_di0>;
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-parallel-display.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx-parallel-display.yaml
new file mode 100644
index 000000000000..bbcfe7e2958b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-parallel-display.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx-parallel-display.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parallel display support
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx-parallel-display
+
+  interface-pix-fmt:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - rgb24
+      - rgb565
+      - bgr666
+      - lvds666
+
+  ddc:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle describing the i2c bus handling the display data channel
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: input port connected to the IPU display interface
+
+  port@1:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: output port connected to a panel
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    display {
+        compatible = "fsl,imx-parallel-display";
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interface-pix-fmt = "rgb24";
+
+        port@0 {
+            reg = <0>;
+
+            endpoint {
+                remote-endpoint = <&ipu_di0_disp0>;
+            };
+        };
+
+        port@1 {
+            reg = <1>;
+
+            endpoint {
+                remote-endpoint = <&panel_in>;
+            };
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ipu.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ipu.yaml
new file mode 100644
index 000000000000..ec78645d4de0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ipu.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6q-ipu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX IPUv3
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx51-ipu
+          - fsl,imx53-ipu
+          - fsl,imx6q-ipu
+      - items:
+          - const: fsl,imx6qp-ipu
+          - const: fsl,imx6q-ipu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: bus
+      - const: di0
+      - const: di1
+
+  resets:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  fsl,prg:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: phandle to prg node associated with this IPU instance
+
+  port@0:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: CSI0
+
+  port@1:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: CSI1
+
+  port@2:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: DI0
+
+  port@3:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description: DI1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    display-controller@18000000 {
+        compatible = "fsl,imx53-ipu";
+        reg = <0x18000000 0x080000000>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        interrupts = <11 10>;
+        resets = <&src 2>;
+
+        port@2 {
+            reg = <2>;
+
+            endpoint {
+                remote-endpoint = <&display_in>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml
new file mode 100644
index 000000000000..1646f41d8f72
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6q-ldb.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6q-ldb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale LVDS Display Bridge (ldb)
+
+description:
+  The LVDS Display Bridge device tree node contains up to two lvds-channel
+  nodes describing each of the two LVDS encoder channels of the bridge.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - fsl,imx53-ldb
+      - items:
+          - enum:
+              - fsl,imx6q-ldb
+          - const: fsl,imx53-ldb
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+  gpr:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle points to the iomuxc-gpr region containing the LVDS
+      control register.
+
+  clocks:
+    minItems: 6
+    maxItems: 8
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: di0_pll
+          - const: di1_pll
+          - const: di0_sel
+          - const: di1_sel
+          - const: di0
+          - const: di1
+      - items:
+          - const: di0_pll
+          - const: di1_pll
+          - const: di0_sel
+          - const: di1_sel
+          - const: di2_sel
+          - const: di3_sel
+          - const: di0
+          - const: di1
+
+  fsl,dual-channel:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      if it exists, only LVDS channel 0 should
+      be configured - one input will be distributed on both outputs in dual
+      channel mode
+
+patternProperties:
+  '^lvds-channel@[0-1]$':
+    type: object
+    description:
+      Each LVDS Channel has to contain either an of graph link to a panel device node
+      or a display-timings node that describes the video timings for the connected
+      LVDS display as well as the fsl,data-mapping and fsl,data-width properties.
+
+    properties:
+      reg:
+        maxItems: 1
+
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      display-timings:
+        $ref: /schemas/display/panel/display-timings.yaml#
+
+      fsl,data-mapping:
+        enum:
+          - spwg
+          - jeida
+
+      fsl,data-width:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: should be <18> or <24>
+        enum:
+          - 18
+          - 24
+
+      fsl,panel:
+        $ref: /schemas/types.yaml#/definitions/phandle
+        description: phandle to lcd panel
+
+    patternProperties:
+      '^port@[0-4]$':
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          On i.MX5, the internal two-input-multiplexer is used. Due to hardware
+          limitations, only one input port (port@[0,1]) can be used for each channel
+          (lvds-channel@[0,1], respectively).
+          On i.MX6, there should be four input ports (port@[0-3]) that correspond
+          to the four LVDS multiplexer inputs.
+          A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected
+          to a panel input port. Optionally, the output port can be left out if
+          display-timings are used instead.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - gpr
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx5-clock.h>
+
+    ldb@53fa8008 {
+        compatible = "fsl,imx53-ldb";
+        reg = <0x53fa8008 0x4>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        gpr = <&gpr>;
+        clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+                 <&clks IMX5_CLK_LDB_DI1_SEL>,
+                 <&clks IMX5_CLK_IPU_DI0_SEL>,
+                 <&clks IMX5_CLK_IPU_DI1_SEL>,
+                 <&clks IMX5_CLK_LDB_DI0_GATE>,
+                 <&clks IMX5_CLK_LDB_DI1_GATE>;
+        clock-names = "di0_pll", "di1_pll",
+                      "di0_sel", "di1_sel",
+                      "di0", "di1";
+
+        /* Using an of-graph endpoint link to connect the panel */
+        lvds-channel@0 {
+                reg = <0>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    endpoint {
+                        remote-endpoint = <&ipu_di0_lvds0>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    endpoint {
+                        remote-endpoint = <&panel_in>;
+                    };
+               };
+        };
+
+        /* Using display-timings and fsl,data-mapping/width instead */
+        lvds-channel@1 {
+                reg = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+                fsl,data-mapping = "spwg";
+                fsl,data-width = <24>;
+
+                display-timings {/* ... */
+                };
+
+                port@1 {
+                     reg = <1>;
+
+                     endpoint {
+                         remote-endpoint = <&ipu_di1_lvds1>;
+                     };
+                };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-pre.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-pre.yaml
new file mode 100644
index 000000000000..73bc73ff6e69
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-pre.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6qp-pre.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX PRE (Prefetch Resolve Engine)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6qp-pre
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: axi
+  fsl,iram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      phandle pointing to the mmio-sram device node, that should be
+      used for the PRE SRAM double buffer.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pre@21c8000 {
+        compatible = "fsl,imx6qp-pre";
+        reg = <0x021c8000 0x1000>;
+        interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&clks IMX6QDL_CLK_PRE0>;
+        clock-names = "axi";
+        fsl,iram = <&ocram2>;
+    };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-prg.yaml b/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-prg.yaml
new file mode 100644
index 000000000000..582da8c489f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx6qp-prg.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx6qp-prg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX PRG (Prefetch Resolve Gasket)
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: fsl,imx6qp-prg
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: axi
+
+  fsl,pres:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      maxItems: 1
+    description:
+      phandles to the PRE units attached to this PRG, with the fixed
+      PRE as the first entry and the muxable PREs following.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx6qdl-clock.h>
+
+    prg@21cc000 {
+        compatible = "fsl,imx6qp-prg";
+        reg = <0x021cc000 0x1000>;
+        clocks = <&clks IMX6QDL_CLK_PRG0_APB>, <&clks IMX6QDL_CLK_PRG0_AXI>;
+        clock-names = "ipg", "axi";
+        fsl,pres = <&pre1>, <&pre2>, <&pre3>;
+    };
+
diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
deleted file mode 100644
index 269b1ae2fca9..000000000000
--- a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
+++ /dev/null
@@ -1,160 +0,0 @@
-Freescale i.MX DRM master device
-================================
-
-The freescale i.MX DRM master device is a virtual device needed to list all
-IPU or other display interface nodes that comprise the graphics subsystem.
-
-Required properties:
-- compatible: Should be "fsl,imx-display-subsystem"
-- ports: Should contain a list of phandles pointing to display interface ports
-  of IPU devices
-
-example:
-
-display-subsystem {
-	compatible = "fsl,imx-display-subsystem";
-	ports = <&ipu_di0>;
-};
-
-
-Freescale i.MX IPUv3
-====================
-
-Required properties:
-- compatible: Should be "fsl,<chip>-ipu" where <chip> is one of
-  - imx51
-  - imx53
-  - imx6q
-  - imx6qp
-- reg: should be register base and length as documented in the
-  datasheet
-- interrupts: Should contain sync interrupt and error interrupt,
-  in this order.
-- resets: phandle pointing to the system reset controller and
-          reset line index, see reset/fsl,imx-src.txt for details
-Additional required properties for fsl,imx6qp-ipu:
-- fsl,prg: phandle to prg node associated with this IPU instance
-Optional properties:
-- port@[0-3]: Port nodes with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-  Ports 0 and 1 should correspond to CSI0 and CSI1,
-  ports 2 and 3 should correspond to DI0 and DI1, respectively.
-
-example:
-
-ipu: ipu@18000000 {
-	#address-cells = <1>;
-	#size-cells = <0>;
-	compatible = "fsl,imx53-ipu";
-	reg = <0x18000000 0x080000000>;
-	interrupts = <11 10>;
-	resets = <&src 2>;
-
-	ipu_di0: port@2 {
-		reg = <2>;
-
-		ipu_di0_disp0: endpoint {
-			remote-endpoint = <&display_in>;
-		};
-	};
-};
-
-Freescale i.MX PRE (Prefetch Resolve Engine)
-============================================
-
-Required properties:
-- compatible: should be "fsl,imx6qp-pre"
-- reg: should be register base and length as documented in the
-  datasheet
-- clocks : phandle to the PRE axi clock input, as described
-  in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
-- clock-names: should be "axi"
-- interrupts: should contain the PRE interrupt
-- fsl,iram: phandle pointing to the mmio-sram device node, that should be
-  used for the PRE SRAM double buffer.
-
-example:
-
-pre@21c8000 {
-	compatible = "fsl,imx6qp-pre";
-	reg = <0x021c8000 0x1000>;
-	interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
-	clocks = <&clks IMX6QDL_CLK_PRE0>;
-	clock-names = "axi";
-	fsl,iram = <&ocram2>;
-};
-
-Freescale i.MX PRG (Prefetch Resolve Gasket)
-============================================
-
-Required properties:
-- compatible: should be "fsl,imx6qp-prg"
-- reg: should be register base and length as documented in the
-  datasheet
-- clocks : phandles to the PRG ipg and axi clock inputs, as described
-  in Documentation/devicetree/bindings/clock/clock-bindings.txt and
-  Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
-- clock-names: should be "ipg" and "axi"
-- fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
-  PRE as the first entry and the muxable PREs following.
-
-example:
-
-prg@21cc000 {
-	compatible = "fsl,imx6qp-prg";
-	reg = <0x021cc000 0x1000>;
-	clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
-		 <&clks IMX6QDL_CLK_PRG0_AXI>;
-	clock-names = "ipg", "axi";
-	fsl,pres = <&pre1>, <&pre2>, <&pre3>;
-};
-
-Parallel display support
-========================
-
-Required properties:
-- compatible: Should be "fsl,imx-parallel-display"
-Optional properties:
-- interface-pix-fmt: How this display is connected to the
-  display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
-  and "lvds666".
-- ddc: phandle describing the i2c bus handling the display data
-  channel
-- port@[0-1]: Port nodes with endpoint definitions as defined in
-  Documentation/devicetree/bindings/media/video-interfaces.txt.
-  Port 0 is the input port connected to the IPU display interface,
-  port 1 is the output port connected to a panel.
-
-example:
-
-disp0 {
-	compatible = "fsl,imx-parallel-display";
-	interface-pix-fmt = "rgb24";
-
-	port@0 {
-		reg = <0>;
-
-		display_in: endpoint {
-			remote-endpoint = <&ipu_di0_disp0>;
-		};
-	};
-
-	port@1 {
-		reg = <1>;
-
-		display_out: endpoint {
-			remote-endpoint = <&panel_in>;
-		};
-	};
-};
-
-panel {
-	...
-
-	port {
-		panel_in: endpoint {
-			remote-endpoint = <&display_out>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
deleted file mode 100644
index 03653a291b54..000000000000
--- a/Documentation/devicetree/bindings/display/imx/ldb.txt
+++ /dev/null
@@ -1,146 +0,0 @@
-Device-Tree bindings for LVDS Display Bridge (ldb)
-
-LVDS Display Bridge
-===================
-
-The LVDS Display Bridge device tree node contains up to two lvds-channel
-nodes describing each of the two LVDS encoder channels of the bridge.
-
-Required properties:
- - #address-cells : should be <1>
- - #size-cells : should be <0>
- - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb".
-                Both LDB versions are similar, but i.MX6 has an additional
-                multiplexer in the front to select any of the four IPU display
-                interfaces as input for each LVDS channel.
- - gpr : should be <&gpr> on i.MX53 and i.MX6q.
-         The phandle points to the iomuxc-gpr region containing the LVDS
-         control register.
-- clocks, clock-names : phandles to the LDB divider and selector clocks and to
-                        the display interface selector clocks, as described in
-                        Documentation/devicetree/bindings/clock/clock-bindings.txt
-        The following clocks are expected on i.MX53:
-                "di0_pll" - LDB LVDS channel 0 mux
-                "di1_pll" - LDB LVDS channel 1 mux
-                "di0" - LDB LVDS channel 0 gate
-                "di1" - LDB LVDS channel 1 gate
-                "di0_sel" - IPU1 DI0 mux
-                "di1_sel" - IPU1 DI1 mux
-        On i.MX6q the following additional clocks are needed:
-                "di2_sel" - IPU2 DI0 mux
-                "di3_sel" - IPU2 DI1 mux
-        The needed clock numbers for each are documented in
-        Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
-        Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
-
-Optional properties:
- - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
- - pinctrl-0 : a phandle pointing to LVDS pin settings on i.MX53,
-               not used on i.MX6q
- - fsl,dual-channel : boolean. if it exists, only LVDS channel 0 should
-   be configured - one input will be distributed on both outputs in dual
-   channel mode
-
-LVDS Channel
-============