Merge branch 'master'

44 files changed, 455 insertions, 575 deletions

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 54e5f9b1536d..d02c64953dcd 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -44,7 +44,6 @@
                            compiler and the textural representation of
                            the tree that can be "compiled" by dtc.
 
-
    November 21, 2005: Rev 0.5
 			 - Additions/generalizations for 32-bit
 			 - Changed to reflect the new arch/powerpc
@@ -1307,6 +1306,65 @@ platforms are moved over to use the flattened-device-tree model.
 	};
 
 
+   f) Freescale SOC USB controllers
+
+   The device node for a USB controller that is part of a Freescale
+   SOC is as described in the document "Open Firmware Recommended
+   Practice : Universal Serial Bus" with the following modifications
+   and additions :  
+
+   Required properties :
+    - compatible : Should be "fsl-usb2-mph" for multi port host usb
+      controllers, or "fsl-usb2-dr" for dual role usb controllers
+    - phy_type : For multi port host usb controllers, should be one of
+      "ulpi", or "serial". For dual role usb controllers, should be
+      one of "ulpi", "utmi", "utmi_wide", or "serial".
+    - reg : Offset and length of the register set for the device
+    - port0 : boolean; if defined, indicates port0 is connected for
+      fsl-usb2-mph compatible controllers.  Either this property or
+      "port1" (or both) must be defined for "fsl-usb2-mph" compatible 
+      controllers.
+    - port1 : boolean; if defined, indicates port1 is connected for
+      fsl-usb2-mph compatible controllers.  Either this property or
+      "port0" (or both) must be defined for "fsl-usb2-mph" compatible 
+      controllers.
+
+   Recommended properties :
+    - interrupts : <a b> where a is the interrupt number and b is a
+      field that represents an encoding of the sense and level
+      information for the interrupt.  This should be encoded based on
+      the information in section 2) depending on the type of interrupt
+      controller you have.
+    - interrupt-parent : the phandle for the interrupt controller that
+      services interrupts for this device.
+
+   Example multi port host usb controller device node : 
+	usb@22000 {
+	        device_type = "usb";
+		compatible = "fsl-usb2-mph";
+		reg = <22000 1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <700>;
+		interrupts = <27 1>;
+		phy_type = "ulpi";
+		port0;
+		port1;
+	};
+
+   Example dual role usb controller device node : 
+	usb@23000 {
+		device_type = "usb";
+		compatible = "fsl-usb2-dr";
+		reg = <23000 1000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupt-parent = <700>;
+		interrupts = <26 1>;
+		phy = "ulpi";
+	};
+
+
    More devices will be defined as this spec matures.
 
 
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 1c316f14ed94..646a3a5d33a5 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -46,10 +46,11 @@
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-//#include <asm/debug-ll.h>
+
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-lcd.h>
 
+#include <asm/arch/h1940-latch.h>
 #include <asm/arch/fb.h>
 
 #include <linux/serial_core.h>
@@ -59,7 +60,12 @@
 #include "cpu.h"
 
 static struct map_desc h1940_iodesc[] __initdata = {
-	/* nothing here yet */
+	[0] = {
+		.virtual	= (unsigned long)H1940_LATCH,
+		.pfn		= __phys_to_pfn(H1940_PA_LATCH),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE
+	},
 };
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
@@ -92,6 +98,25 @@ static struct s3c2410_uartcfg h1940_uartcfgs[] = {
 	}
 };
 
+/* Board control latch control */
+
+static unsigned int latch_state = H1940_LATCH_DEFAULT;
+
+void h1940_latch_control(unsigned int clear, unsigned int set)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	latch_state &= ~clear;
+	latch_state |= set;
+
+	__raw_writel(latch_state, H1940_LATCH);
+
+	local_irq_restore(flags);
+}
+
+EXPORT_SYMBOL_GPL(h1940_latch_control);
 
 
 /**
diff --git a/arch/arm/mach-s3c2410/s3c2400.h b/arch/arm/mach-s3c2410/s3c2400.h
new file mode 100644
index 000000000000..8b2394e1ed40
--- /dev/null
+++ b/arch/arm/mach-s3c2410/s3c2400.h
@@ -0,0 +1,31 @@
+/* arch/arm/mach-s3c2410/s3c2400.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *     09-Fev-2006 LCVR  First version, based on s3c2410.h
+*/
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern  int s3c2400_init(void);
+
+extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2400_init_clocks(int xtal);
+
+#else
+#define s3c2400_init_clocks NULL
+#define s3c2400_init_uarts NULL
+#define s3c2400_map_io NULL
+#define s3c2400_init NULL
+#endif
diff --git a/arch/i386/kernel/smpboot.c b/arch/i386/kernel/smpboot.c
index 255adb498268..fb00ab7b7612 100644
--- a/arch/i386/kernel/smpboot.c
+++ b/arch/i386/kernel/smpboot.c
@@ -87,11 +87,7 @@ EXPORT_SYMBOL(cpu_online_map);
 cpumask_t cpu_callin_map;
 cpumask_t cpu_callout_map;
 EXPORT_SYMBOL(cpu_callout_map);
-#ifdef CONFIG_HOTPLUG_CPU
-cpumask_t cpu_possible_map = CPU_MASK_ALL;
-#else
 cpumask_t cpu_possible_map;
-#endif
 EXPORT_SYMBOL(cpu_possible_map);
 static cpumask_t smp_commenced_mask;
 
diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c
index 72a1b9cae2e4..6e4c3baef6cc 100644
--- a/arch/i386/mach-voyager/voyager_smp.c
+++ b/arch/i386/mach-voyager/voyager_smp.c
@@ -240,7 +240,7 @@ static cpumask_t smp_commenced_mask = CPU_MASK_NONE;
 cpumask_t cpu_callin_map = CPU_MASK_NONE;
 cpumask_t cpu_callout_map = CPU_MASK_NONE;
 EXPORT_SYMBOL(cpu_callout_map);
-cpumask_t cpu_possible_map = CPU_MASK_ALL;
+cpumask_t cpu_possible_map = CPU_MASK_NONE;
 EXPORT_SYMBOL(cpu_possible_map);
 
 /* The per processor IRQ masks (these are usually kept in sync) */
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index df338c5cc910..80d114a3a837 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -83,6 +83,12 @@ config GENERIC_TBSYNC
 	default y if PPC32 && SMP
 	default n
 
+config DEFAULT_UIMAGE
+	bool
+	help
+	  Used to allow a board to specify it wants a uImage built by default
+	default n
+
 menu "Processor support"
 choice
 	prompt "Processor Type"
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 44dd82b791d1..5500ab55d042 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -142,6 +142,7 @@ drivers-$(CONFIG_OPROFILE)	+= arch/powerpc/oprofile/
 # Default to zImage, override when needed
 defaultimage-y			:= zImage
 defaultimage-$(CONFIG_PPC_ISERIES) := vmlinux
+defaultimage-$(CONFIG_DEFAULT_UIMAGE) := uImage
 KBUILD_IMAGE := $(defaultimage-y)
 all: $(KBUILD_IMAGE)
 
@@ -167,6 +168,8 @@ endef
 
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
+
+archmrproper:
 	$(Q)rm -rf arch/$(ARCH)/include
 
 archprepare: checkbin
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index c287980b7e65..80e9fe2632b8 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -12,10 +12,10 @@ endif
 
 obj-y				:= semaphore.o cputable.o ptrace.o syscalls.o \
 				   irq.o align.o signal_32.o pmc.o vdso.o \
-				   init_task.o process.o
+				   init_task.o process.o systbl.o
 obj-y				+= vdso32/
 obj-$(CONFIG_PPC64)		+= setup_64.o binfmt_elf32.o sys_ppc32.o \
-				   signal_64.o ptrace32.o systbl.o \
+				   signal_64.o ptrace32.o \
 				   paca.o cpu_setup_power4.o \
 				   firmware.o sysfs.o idle_64.o
 obj-$(CONFIG_PPC64)		+= vdso64/
@@ -46,7 +46,7 @@ extra-$(CONFIG_8xx)		:= head_8xx.o
 extra-y				+= vmlinux.lds
 
 obj-y				+= time.o prom.o traps.o setup-common.o udbg.o
-obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o misc_32.o systbl.o
+obj-$(CONFIG_PPC32)		+= entry_32.o setup_32.o misc_32.o
 obj-$(CONFIG_PPC64)		+= misc_64.o dma_64.o iommu.o
 obj-$(CONFIG_PPC_MULTIPLATFORM)	+= prom_init.o
 obj-$(CONFIG_MODULES)		+= ppc_ksyms.o
diff --git a/arch/powerpc/kernel/systbl.S b/arch/powerpc/kernel/systbl.S
index 007b15ee36d2..8a9f994ed917 100644
--- a/arch/powerpc/kernel/systbl.S
+++ b/arch/powerpc/kernel/systbl.S
@@ -36,8 +36,6 @@
 #ifdef CONFIG_PPC64
 #define sys_sigpending	sys_ni_syscall
 #define sys_old_getrlimit sys_ni_syscall
-#else
-#define ppc_rtas	sys_ni_syscall
 #endif
 
 _GLOBAL(sys_call_table)
@@ -323,3 +321,4 @@ SYSCALL(spu_run)
 SYSCALL(spu_create)
 COMPAT_SYS(pselect6)
 COMPAT_SYS(ppoll)
+SYSCALL(unshare)
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index c3427eed8345..5a936566fd61 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -1048,286 +1048,3 @@ _GLOBAL(name) \
 	blr
 
 SYSCALL(execve)
-
-/* Why isn't this a) automatic, b) written in 'C'? */
-	.data
-	.align 4
-_GLOBAL(sys_call_table)
-	.long sys_restart_syscall /* 0 */
-	.long sys_exit
-	.long ppc_fork
-	.long sys_read
-	.long sys_write
-	.long sys_open		/* 5 */
-	.long sys_close
-	.long sys_waitpid
-	.long sys_creat
-	.long sys_link
-	.long sys_unlink	/* 10 */
-	.long sys_execve
-	.long sys_chdir
-	.long sys_time
-	.long sys_mknod
-	.long sys_chmod		/* 15 */
-	.long sys_lchown
-	.long sys_ni_syscall			/* old break syscall holder */
-	.long sys_stat
-	.long sys_lseek
-	.long sys_getpid	/* 20 */
-	.long sys_mount
-	.long sys_oldumount
-	.long sys_setuid
-	.long sys_getuid
-	.long sys_stime		/* 25 */
-	.long sys_ptrace
-	.long sys_alarm
-	.long sys_fstat
-	.long sys_pause
-	.long sys_utime		/* 30 */
-	.long sys_ni_syscall			/* old stty syscall holder */
-	.long sys_ni_syscall			/* old gtty syscall holder */
-	.long sys_access
-	.long sys_nice
-	.long sys_ni_syscall	/* 35 */	/* old ftime syscall holder */
-	.long sys_sync
-	.long sys_kill
-	.long sys_rename
-	.long sys_mkdir
-	.long sys_rmdir		/* 40 */
-	.long sys_dup
-	.long sys_pipe
-	.long sys_times
-	.long sys_ni_syscall			/* old prof syscall holder */
-	.long sys_brk		/* 45 */
-	.long sys_setgid
-	.long sys_getgid
-	.long sys_signal
-	.long sys_geteuid
-	.long sys_getegid	/* 50 */
-	.long sys_acct
-	.long sys_umount			/* recycled never used phys() */
-	.long sys_ni_syscall			/* old lock syscall holder */
-	.long sys_ioctl
-	.long sys_fcntl		/* 55 */
-	.long sys_ni_syscall			/* old mpx syscall holder */
-	.long sys_setpgid
-	.long sys_ni_syscall			/* old ulimit syscall holder */
-	.long sys_olduname
-	.long sys_umask		/* 60 */
-	.long sys_chroot
-	.long sys_ustat
-	.long sys_dup2
-	.long sys_getppid
-	.long sys_getpgrp	/* 65 */
-	.long sys_setsid
-	.long sys_sigaction
-	.long sys_sgetmask
-	.long sys_ssetmask
-	.long sys_setreuid	/* 70 */
-	.long sys_setregid
-	.long sys_sigsuspend
-	.long sys_sigpending
-	.long sys_sethostname
-	.long sys_setrlimit	/* 75 */
-	.long sys_old_getrlimit
-	.long sys_getrusage
-	.long sys_gettimeofday
-	.long sys_settimeofday
-	.long sys_getgroups	/* 80 */
-	.long sys_setgroups
-	.long ppc_select
-	.long sys_symlink
-	.long sys_lstat
-	.long sys_readlink	/* 85 */
-	.long sys_uselib
-	.long sys_swapon
-	.long sys_reboot
-	.long old_readdir
-	.long sys_mmap		/* 90 */
-	.long sys_munmap
-	.long sys_truncate
-	.long sys_ftruncate
-	.long sys_fchmod
-	.long sys_fchown	/* 95 */
-	.long sys_getpriority
-	.long sys_setpriority
-	.long sys_ni_syscall			/* old profil syscall holder */
-	.long sys_statfs
-	.long sys_fstatfs	/* 100 */
-	.long sys_ni_syscall
-	.long sys_socketcall
-	.long sys_syslog
-	.long sys_setitimer
-	.long sys_getitimer	/* 105 */
-	.long sys_newstat
-	.long sys_newlstat
-	.long sys_newfstat
-	.long sys_uname
-	.long sys_ni_syscall	/* 110 */
-	.long sys_vhangup
-	.long sys_ni_syscall	/* old 'idle' syscall */
-	.long sys_ni_syscall
-	.long sys_wait4
-	.long sys_swapoff	/* 115 */
-	.long sys_sysinfo
-	.long sys_ipc
-	.long sys_fsync
-	.long sys_sigreturn
-	.long ppc_clone		/* 120 */
-	.long sys_setdomainname
-	.long sys_newuname
-	.long sys_ni_syscall
-	.long sys_adjtimex
-	.long sys_mprotect	/* 125 */
-	.long sys_sigprocmask
-	.long sys_ni_syscall	/* old sys_create_module */
-	.long sys_init_module
-	.long sys_delete_module
-	.long sys_ni_syscall	/* old sys_get_kernel_syms */	/* 130 */
-	.long sys_quotactl
-	.long sys_getpgid
-	.long sys_fchdir
-	.long sys_bdflush
-	.long sys_sysfs		/* 135 */
-	.long sys_personality
-	.long sys_ni_syscall	/* for afs_syscall */
-	.long sys_setfsuid
-	.long sys_setfsgid
-	.long sys_llseek	/* 140 */
-	.long sys_getdents
-	.long ppc_select
-	.long sys_flock
-	.long sys_msync
-	.long sys_readv		/* 145 */
-	.long sys_writev
-	.long sys_getsid
-	.long sys_fdatasync
-	.long sys_sysctl
-	.long sys_mlock		/* 150 */
-	.long sys_munlock
-	.long sys_mlockall
-	.long sys_munlockall
-	.long sys_sched_setparam
-	.long sys_sched_getparam	/* 155 */
-	.long sys_sched_setscheduler
-	.long sys_sched_getscheduler
-	.long sys_sched_yield
-	.long sys_sched_get_priority_max
-	.long sys_sched_get_priority_min  /* 160 */
-	.long sys_sched_rr_get_interval
-	.long sys_nanosleep
-	.long sys_mremap
-	.long sys_setresuid
-	.long sys_getresuid	/* 165 */
-	.long sys_ni_syscall		/* old sys_query_module */
-	.long sys_poll
-	.long sys_nfsservctl
-	.long sys_setresgid
-	.long sys_getresgid	/* 170 */
-	.long sys_prctl
-	.long sys_rt_sigreturn
-	.long sys_rt_sigaction
-	.long sys_rt_sigprocmask
-	.long sys_rt_sigpending	/* 175 */
-	.long sys_rt_sigtimedwait
-	.long sys_rt_sigqueueinfo
-	.long sys_rt_sigsuspend
-	.long sys_pread64
-	.long sys_pwrite64	/* 180 */
-	.long sys_chown
-	.long sys_getcwd
-	.long sys_capget
-	.long sys_capset
-	.long sys_sigaltstack	/* 185 */
-	.long sys_sendfile
-	.long sys_ni_syscall		/* streams1 */
-	.long sys_ni_syscall		/* streams2 */
-	.long ppc_vfork
-	.long sys_getrlimit	/* 190 */
-	.long sys_readahead
-	.long sys_mmap2
-	.long sys_truncate64
-	.long sys_ftruncate64
-	.long sys_stat64	/* 195 */
-	.long sys_lstat64
-	.long sys_fstat64
-	.long sys_pciconfig_read
-	.long sys_pciconfig_write
-	.long sys_pciconfig_iobase 	/* 200 */
-	.long sys_ni_syscall		/* 201 - reserved - MacOnLinux - new */
-	.long sys_getdents64
-	.long sys_pivot_root
-	.long sys_fcntl64
-	.long sys_madvise	/* 205 */
-	.long sys_mincore
-	.long sys_gettid
-	.long sys_tkill
-	.long sys_setxattr
-	.long sys_lsetxattr	/* 210 */
-	.long sys_fsetxattr
-	.long sys_getxattr
-	.long sys_lgetxattr
-	.long sys_fgetxattr
-	.long sys_listxattr	/* 215 */
-	.long sys_llistxattr
-	.long sys_flistxattr
-	.long sys_removexattr
-	.long sys_lremovexattr
-	.long sys_fremovexattr	/* 220 */
-	.long sys_futex
-	.long sys_sched_setaffinity
-	.long sys_sched_getaffinity
-	.long sys_ni_syscall
-	.long sys_ni_syscall	/* 225 - reserved for Tux */
-	.long sys_sendfile64
-	.long sys_io_setup
-	.long sys_io_destroy
-	.long sys_io_getevents
-	.long sys_io_submit	/* 230 */
-	.long sys_io_cancel
-	.long sys_set_tid_address
-	.long sys_fadvise64
-	.long sys_exit_group
-	.long sys_lookup_dcookie /* 235 */
-	.long sys_epoll_create
-	.long sys_epoll_ctl
-	.long sys_epoll_wait
-	.long sys_remap_file_pages
-	.long sys_timer_create	/* 240 */
-	.long sys_timer_settime
-	.long sys_timer_gettime
-	.long sys_timer_getoverrun
-	.long sys_timer_delete
-	.long sys_clock_settime	/* 245 */
-	.long sys_clock_gettime
-	.long sys_clock_getres
-	.long sys_clock_nanosleep
-	.long sys_swapcontext
-	.long sys_tgkill	/* 250 */
-	.long sys_utimes
-	.long sys_statfs64
-	.long sys_fstatfs64
-	.long ppc_fadvise64_64
-	.long sys_ni_syscall		/* 255 - rtas (used on ppc64) */
-	.long sys_debug_setcontext
-	.long sys_ni_syscall		/* 257 reserved for vserver */
-	.long sys_ni_syscall		/* 258 reserved for new sys_remap_file_pages */
-	.long sys_ni_syscall		/* 259 reserved for new sys_mbind */
-	.long sys_ni_syscall		/* 260 reserved for new sys_get_mempolicy */
-	.long sys_ni_syscall		/* 261 reserved for new sys_set_mempolicy */
-	.long sys_mq_open
-	.long sys_mq_unlink
-	.long sys_mq_timedsend
-	.long sys_mq_timedreceive	/* 265 */
-	.long sys_mq_notify
-	.long sys_mq_getsetattr
-	.long sys_kexec_load
-	.long sys_add_key
-	.long sys_request_key		/* 270 */
-	.long sys_keyctl
-	.long sys_waitid
-	.long sys_ioprio_set
-	.long sys_ioprio_get
-	.long sys_inotify_init		/* 275 */
-	.long sys_inotify_add_watch
-	.long sys_inotify_rm_watch
diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c
index ef706694a0c1..5291b5f8788d 100644
--- a/arch/s390/kernel/compat_signal.c
+++ b/arch/s390/kernel/compat_signal.c
@@ -195,9 +195,6 @@ sys32_sigaction(int sig, const struct old_sigaction32 __user *act,
 	return ret;
 }
 
-int
-do_sigaction(int sig, const struct k_sigaction *act, struct k_sigaction *oact);
-
 asmlinkage long
 sys32_rt_sigaction(int sig, const struct sigaction32 __user *act,
 	   struct sigaction32 __user *oact,  size_t sigsetsize)
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 076e07c1da38..a23816d3e9a1 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -268,6 +268,8 @@ static struct tty_buffer *tty_buffer_alloc(size_t size)
 	p->size = size;
 	p->next = NULL;
 	p->active = 0;
+	p->commit = 0;
+	p->read = 0;
 	p->char_buf_ptr = (char *)(p->data);
 	p->flag_buf_ptr = (unsigned char *)p->char_buf_ptr + size;
 /* 	printk("Flip create %p\n", p); */
@@ -298,6 +300,8 @@ static struct tty_buffer *tty_buffer_find(struct tty_struct *tty, size_t size)
 			*tbh = t->next;
 			t->next = NULL;
 			t->used = 0;
+			t->commit = 0;
+			t->read = 0;
 			/* DEBUG ONLY */
 			memset(t->data, '*', size);
 /* 			printk("Flip recycle %p\n", t); */
@@ -335,6 +339,7 @@ int tty_buffer_request_room(struct tty_struct *tty, size_t size)
 			if (b != NULL) {
 				b->next = n;
 				b->active = 0;
+				b->commit = b->used;
 			} else
 				tty->buf.head = n;
 			tty->buf.tail = n;
@@ -2752,6 +2757,9 @@ static void flush_to_ldisc(void *private_)
 	unsigned long 	flags;
 	struct tty_ldisc *disc;
 	struct tty_buffer *tbuf;
+	int count;
+	char *char_buf;
+	unsigned char *flag_buf;
 
 	disc = tty_ldisc_ref(tty);
 	if (disc == NULL)	/*  !TTY_LDISC */
@@ -2765,16 +2773,20 @@ static void flush_to_ldisc(void *private_)
 		goto out;
 	}
 	spin_lock_irqsave(&tty->buf.lock, flags);
-	while((tbuf = tty->buf.head) != NULL && !tbuf->active) {
+	while((tbuf = tty->buf.head) != NULL) {
+		while ((count = tbuf->commit - tbuf->read) != 0) {
+			char_buf = tbuf->char_buf_ptr + tbuf->read;
+			flag_buf = tbuf->flag_buf_ptr + tbuf->read;
+			tbuf->read += count;
+			spin_unlock_irqrestore(&tty->buf.lock, flags);
+			disc->receive_buf(tty, char_buf, flag_buf, count);
+			spin_lock_irqsave(&tty->buf.lock, flags);
+		}
+		if (tbuf->active)
+			break;
 		tty->buf.head = tbuf->next;
 		if (tty->buf.head == NULL)
 			tty->buf.tail = NULL;
-		spin_unlock_irqrestore(&tty->buf.lock, flags);
-		/* printk("Process buffer %p for %d\n", tbuf, tbuf->used); */
-		disc->receive_buf(tty, tbuf->char_buf_ptr,
-				       tbuf->flag_buf_ptr,
-				       tbuf->used);
-		spin_lock_irqsave(&tty->buf.lock, flags);
 		tty_buffer_free(tty, tbuf);
 	}
 	spin_unlock_irqrestore(&tty->buf.lock, flags);
@@ -2871,8 +2883,10 @@ void tty_flip_buffer_push(struct tty_struct *tty)
 {
 	unsigned long flags;
 	spin_lock_irqsave(&tty->buf.lock, flags);
-	if (tty->buf.tail != NULL)
+	if (tty->buf.tail != NULL) {
 		tty->buf.tail->active = 0;
+		tty->buf.tail->commit = tty->buf.tail->used;
+	}
 	spin_unlock_irqrestore(&tty->buf.lock, flags);
 
 	if (tty->low_latency)
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 233a4f608084..ef85d76575a2 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -148,7 +148,7 @@ config IPW2100
 	  In order to use this driver, you will need a firmware image for it.
           You can obtain the firmware from
 	  <http://ipw2100.sf.net/>.  Once you have the firmware image, you 
-	  will need to place it in /etc/firmware.
+	  will need to place it in /lib/firmware.
 
           You will also very likely need the Wireless Tools in order to
           configure your card:
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index 1d85533d46d2..f3763d2ccb86 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -1717,11 +1717,9 @@ ioc4_change_speed(struct uart_port *the_port,
 	}
 
 	if (cflag & CRTSCTS) {
-		info->flags |= ASYNC_CTS_FLOW;
 		port->ip_sscr |= IOC4_SSCR_HFC_EN;
 	}
 	else {
-		info->flags &= ~ASYNC_CTS_FLOW;
 		port->ip_sscr &= ~IOC4_SSCR_HFC_EN;
 	}
 	writel(port->ip_sscr, &port->ip_serial_regs->sscr);
@@ -1760,18 +1758,6 @@ static inline int ic4_startup_local(struct uart_port *the_port)
 
 	info = the_port->info;
 
-	if (info->tty) {
-		set_bit(TTY_IO_ERROR, &info->tty->flags);
-		clear_bit(TTY_IO_ERROR, &info->tty->flags);
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
-			info->tty->alt_speed = 57600;
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
-			info->tty->alt_speed = 115200;
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
-			info->tty->alt_speed = 230400;
-		if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
-			info->tty->alt_speed = 460800;
-	}
 	local_open(port);
 
 	/* set the speed of the serial port */
diff --git a/include/asm-arm/arch-s3c2410/h1940-latch.h b/include/asm-arm/arch-s3c2410/h1940-latch.h
new file mode 100644
index 000000000000..c5802411f43d
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/h1940-latch.h
@@ -0,0 +1,64 @@
+/* linux/include/asm-arm/arch-s3c2410/h1940-latch.h
+ *
+ * (c) 2005 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ *  iPAQ H1940 series - latch definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under