Merge branch 'pm-cpufreq'

* pm-cpufreq: (33 commits)
  cpufreq: imx6q: Fix imx6sx low frequency support
  cpufreq: speedstep-lib: make several arrays static, makes code smaller
  cpufreq: ti: Fix 'of_node_put' being called twice in error handling path
  cpufreq: dt-platdev: Drop few entries from whitelist
  cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2
  ARM: ux500: don't select CPUFREQ_DT
  cpufreq: Convert to using %pOF instead of full_name
  cpufreq: Cap the default transition delay value to 10 ms
  cpufreq: dbx500: Delete obsolete driver
  mfd: db8500-prcmu: Get rid of cpufreq dependency
  cpufreq: enable the DT cpufreq driver on the Ux500
  cpufreq: Loongson2: constify platform_device_id
  cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver
  cpufreq: remove setting of policy->cpu in policy->cpus during init
  cpufreq: mediatek: add support of cpufreq to MT7622 SoC
  cpufreq: mediatek: add cleanups with the more generic naming
  cpufreq: rcar: Add support for R8A7795 SoC
  cpufreq: dt: Add rk3328 compatible to use generic cpufreq driver
  cpufreq: s5pv210: add missing of_node_put()
  cpufreq: Allow dynamic switching with CPUFREQ_ETERNAL latency
  ...

39 files changed, 468 insertions, 376 deletions

diff --git a/Documentation/admin-guide/pm/cpufreq.rst b/Documentation/admin-guide/pm/cpufreq.rst
index 7af83a92d2d6..47153e64dfb5 100644
--- a/Documentation/admin-guide/pm/cpufreq.rst
+++ b/Documentation/admin-guide/pm/cpufreq.rst
@@ -479,14 +479,6 @@ This governor exposes the following tunables:
 
 	# echo `$(($(cat cpuinfo_transition_latency) * 750 / 1000)) > ondemand/sampling_rate
 
-
-``min_sampling_rate``
-	The minimum value of ``sampling_rate``.
-
-	Equal to 10000 (10 ms) if :c:macro:`CONFIG_NO_HZ_COMMON` and
-	:c:data:`tick_nohz_active` are both set or to 20 times the value of
-	:c:data:`jiffies` in microseconds otherwise.
-
 ``up_threshold``
 	If the estimated CPU load is above this value (in percent), the governor
 	will set the frequency to the maximum value allowed for the policy.
diff --git a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt b/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
deleted file mode 100644
index 52b457c23eed..000000000000
--- a/Documentation/devicetree/bindings/clock/mt8173-cpu-dvfs.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-Device Tree Clock bindins for CPU DVFS of Mediatek MT8173 SoC
-
-Required properties:
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
-- clock-names: Should contain the following:
-	"cpu"		- The multiplexer for clock input of CPU cluster.
-	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
-			  source (usually MAINPLL) when the original CPU PLL is under
-			  transition and not stable yet.
-	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
-	generic clock consumer properties.
-- proc-supply: Regulator for Vproc of CPU cluster.
-
-Optional properties:
-- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
-	       needs to do "voltage tracking" to step by step scale up/down Vproc and
-	       Vsram to fit SoC specific needs. When absent, the voltage scaling
-	       flow is handled by hardware, hence no software "voltage tracking" is
-	       needed.
-
-Example:
---------
-	cpu0: cpu@0 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x000>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA53SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-	};
-
-	cpu1: cpu@1 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a53";
-		reg = <0x001>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA53SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-	};
-
-	cpu2: cpu@100 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x100>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA57SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-	};
-
-	cpu3: cpu@101 {
-		device_type = "cpu";
-		compatible = "arm,cortex-a57";
-		reg = <0x101>;
-		enable-method = "psci";
-		cpu-idle-states = <&CPU_SLEEP_0>;
-		clocks = <&infracfg CLK_INFRA_CA57SEL>,
-			 <&apmixedsys CLK_APMIXED_MAINPLL>;
-		clock-names = "cpu", "intermediate";
-	};
-
-	&cpu0 {
-		proc-supply = <&mt6397_vpca15_reg>;
-	};
-
-	&cpu1 {
-		proc-supply = <&mt6397_vpca15_reg>;
-	};
-
-	&cpu2 {
-		proc-supply = <&da9211_vcpu_reg>;
-		sram-supply = <&mt6397_vsramca7_reg>;
-	};
-
-	&cpu3 {
-		proc-supply = <&da9211_vcpu_reg>;
-		sram-supply = <&mt6397_vsramca7_reg>;
-	};
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
new file mode 100644
index 000000000000..f6403089edcf
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
@@ -0,0 +1,247 @@
+Binding for MediaTek's CPUFreq driver
+=====================================
+
+Required properties:
+- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock names.
+- clock-names: Should contain the following:
+	"cpu"		- The multiplexer for clock input of CPU cluster.
+	"intermediate"	- A parent of "cpu" clock which is used as "intermediate" clock
+			  source (usually MAINPLL) when the original CPU PLL is under
+			  transition and not stable yet.
+	Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
+	generic clock consumer properties.
+- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
+	for detail.
+- proc-supply: Regulator for Vproc of CPU cluster.
+
+Optional properties:
+- sram-supply: Regulator for Vsram of CPU cluster. When present, the cpufreq driver
+	       needs to do "voltage tracking" to step by step scale up/down Vproc and
+	       Vsram to fit SoC specific needs. When absent, the voltage scaling
+	       flow is handled by hardware, hence no software "voltage tracking" is
+	       needed.
+- #cooling-cells:
+- cooling-min-level:
+- cooling-max-level:
+	Please refer to Documentation/devicetree/bindings/thermal/thermal.txt
+	for detail.
+
+Example 1 (MT7623 SoC):
+
+	cpu_opp_table: opp_table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-598000000 {
+			opp-hz = /bits/ 64 <598000000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-747500000 {
+			opp-hz = /bits/ 64 <747500000>;
+			opp-microvolt = <1050000>;
+		};
+
+		opp-1040000000 {
+			opp-hz = /bits/ 64 <1040000000>;
+			opp-microvolt = <1150000>;
+		};
+
+		opp-1196000000 {
+			opp-hz = /bits/ 64 <1196000000>;
+			opp-microvolt = <1200000>;
+		};
+
+		opp-1300000000 {
+			opp-hz = /bits/ 64 <1300000000>;
+			opp-microvolt = <1300000>;
+		};
+	};
+
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x0>;
+		clocks = <&infracfg CLK_INFRA_CPUSEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table>;
+		#cooling-cells = <2>;
+		cooling-min-level = <0>;
+		cooling-max-level = <7>;
+	};
+	cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x1>;
+		operating-points-v2 = <&cpu_opp_table>;
+	};
+	cpu@2 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x2>;
+		operating-points-v2 = <&cpu_opp_table>;
+	};
+	cpu@3 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a7";
+		reg = <0x3>;
+		operating-points-v2 = <&cpu_opp_table>;
+	};
+
+Example 2 (MT8173 SoC):
+	cpu_opp_table_a: opp_table_a {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-507000000 {
+			opp-hz = /bits/ 64 <507000000>;
+			opp-microvolt = <859000>;
+		};
+
+		opp-702000000 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <908000>;
+		};
+
+		opp-1001000000 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <983000>;
+		};
+
+		opp-1105000000 {
+			opp-hz = /bits/ 64 <1105000000>;
+			opp-microvolt = <1009000>;
+		};
+
+		opp-1183000000 {
+			opp-hz = /bits/ 64 <1183000000>;
+			opp-microvolt = <1028000>;
+		};
+
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1404000000>;
+			opp-microvolt = <1083000>;
+		};
+
+		opp-1508000000 {
+			opp-hz = /bits/ 64 <1508000000>;
+			opp-microvolt = <1109000>;
+		};
+
+		opp-1573000000 {
+			opp-hz = /bits/ 64 <1573000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	cpu_opp_table_b: opp_table_b {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-507000000 {
+			opp-hz = /bits/ 64 <507000000>;
+			opp-microvolt = <828000>;
+		};
+
+		opp-702000000 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-microvolt = <867000>;
+		};
+
+		opp-1001000000 {
+			opp-hz = /bits/ 64 <1001000000>;
+			opp-microvolt = <927000>;
+		};
+
+		opp-1209000000 {
+			opp-hz = /bits/ 64 <1209000000>;
+			opp-microvolt = <968000>;
+		};
+
+		opp-1404000000 {
+			opp-hz = /bits/ 64 <1007000000>;
+			opp-microvolt = <1028000>;
+		};
+
+		opp-1612000000 {
+			opp-hz = /bits/ 64 <1612000000>;
+			opp-microvolt = <1049000>;
+		};
+
+		opp-1807000000 {
+			opp-hz = /bits/ 64 <1807000000>;
+			opp-microvolt = <1089000>;
+		};
+
+		opp-1989000000 {
+			opp-hz = /bits/ 64 <1989000000>;
+			opp-microvolt = <1125000>;
+		};
+	};
+
+	cpu0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x000>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_a>;
+	};
+
+	cpu1: cpu@1 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a53";
+		reg = <0x001>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA53SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_a>;
+	};
+
+	cpu2: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x100>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_b>;
+	};
+
+	cpu3: cpu@101 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a57";
+		reg = <0x101>;
+		enable-method = "psci";
+		cpu-idle-states = <&CPU_SLEEP_0>;
+		clocks = <&infracfg CLK_INFRA_CA57SEL>,
+			 <&apmixedsys CLK_APMIXED_MAINPLL>;
+		clock-names = "cpu", "intermediate";
+		operating-points-v2 = <&cpu_opp_table_b>;
+	};
+
+	&cpu0 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu1 {
+		proc-supply = <&mt6397_vpca15_reg>;
+	};
+
+	&cpu2 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
+
+	&cpu3 {
+		proc-supply = <&da9211_vcpu_reg>;
+		sram-supply = <&mt6397_vsramca7_reg>;
+	};
diff --git a/arch/arm/boot/dts/tango4-smp8758.dtsi b/arch/arm/boot/dts/tango4-smp8758.dtsi
index d2e65c46bcc7..eca33d568690 100644
--- a/arch/arm/boot/dts/tango4-smp8758.dtsi
+++ b/arch/arm/boot/dts/tango4-smp8758.dtsi
@@ -13,7 +13,6 @@
 			reg = <0>;
 			clocks = <&clkgen CPU_CLK>;
 			clock-latency = <1>;
-			operating-points = <1215000 0 607500 0 405000 0 243000 0 135000 0>;
 		};
 
 		cpu1: cpu@1 {
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 2011fec2d6ad..bdce4488ded1 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -71,15 +71,6 @@ config ARM_HIGHBANK_CPUFREQ
 
 	  If in doubt, say N.
 
-config ARM_DB8500_CPUFREQ
-	tristate "ST-Ericsson DB8500 cpufreq" if COMPILE_TEST && !ARCH_U8500
-	default ARCH_U8500
-	depends on HAS_IOMEM
-	depends on !CPU_THERMAL || THERMAL
-	help
-	  This adds the CPUFreq driver for ST-Ericsson Ux500 (DB8500) SoC
-	  series.
-
 config ARM_IMX6Q_CPUFREQ
 	tristate "Freescale i.MX6 cpufreq support"
 	depends on ARCH_MXC
@@ -96,14 +87,13 @@ config ARM_KIRKWOOD_CPUFREQ
 	  This adds the CPUFreq driver for Marvell Kirkwood
 	  SoCs.
 
-config ARM_MT8173_CPUFREQ
-	tristate "Mediatek MT8173 CPUFreq support"
+config ARM_MEDIATEK_CPUFREQ
+	tristate "CPU Frequency scaling support for MediaTek SoCs"
 	depends on ARCH_MEDIATEK && REGULATOR
-	depends on ARM64 || (ARM_CPU_TOPOLOGY && COMPILE_TEST)
 	depends on !CPU_THERMAL || THERMAL
 	select PM_OPP
 	help
-	  This adds the CPUFreq driver support for Mediatek MT8173 SoC.
+	  This adds the CPUFreq driver support for MediaTek SoCs.
 
 config ARM_OMAP2PLUS_CPUFREQ
 	bool "TI OMAP2+"
@@ -242,6 +232,11 @@ config ARM_STI_CPUFREQ
 	  this config option if you wish to add CPUFreq support for STi based
 	  SoCs.
 
+config ARM_TANGO_CPUFREQ
+	bool
+	depends on CPUFREQ_DT && ARCH_TANGO
+	default y
+
 config ARM_TEGRA20_CPUFREQ
 	bool "Tegra20 CPUFreq support"
 	depends on ARCH_TEGRA
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index ab3a42cd29ef..c7af9b2a255e 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -53,12 +53,11 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ)		+= arm_big_little_dt.o
 
 obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ)	+= brcmstb-avs-cpufreq.o
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
-obj-$(CONFIG_ARM_DB8500_CPUFREQ)	+= dbx500-cpufreq.o
 obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ)	+= exynos5440-cpufreq.o
 obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
-obj-$(CONFIG_ARM_MT8173_CPUFREQ)	+= mt8173-cpufreq.o
+obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mediatek-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
 obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
@@ -75,6 +74,7 @@ obj-$(CONFIG_ARM_SA1110_CPUFREQ)	+= sa1110-cpufreq.o
 obj-$(CONFIG_ARM_SCPI_CPUFREQ)		+= scpi-cpufreq.o
 obj-$(CONFIG_ARM_SPEAR_CPUFREQ)		+= spear-cpufreq.o
 obj-$(CONFIG_ARM_STI_CPUFREQ)		+= sti-cpufreq.o
+obj-$(CONFIG_ARM_TANGO_CPUFREQ)		+= tango-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA20_CPUFREQ)	+= tegra20-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA124_CPUFREQ)	+= tegra124-cpufreq.o
 obj-$(CONFIG_ARM_TEGRA186_CPUFREQ)	+= tegra186-cpufreq.o
diff --git a/drivers/cpufreq/arm_big_little.c b/drivers/cpufreq/arm_big_little.c
index ea6d62547b10..17504129fd77 100644
--- a/drivers/cpufreq/arm_big_little.c
+++ b/drivers/cpufreq/arm_big_little.c
@@ -483,11 +483,8 @@ static int bL_cpufreq_init(struct cpufreq_policy *policy)
 		return ret;
 	}
 
-	if (arm_bL_ops->get_transition_latency)
-		policy->cpuinfo.transition_latency =
-			arm_bL_ops->get_transition_latency(cpu_dev);
-	else
-		policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	policy->cpuinfo.transition_latency =
+				arm_bL_ops->get_transition_latency(cpu_dev);
 
 	if (is_bL_switching_enabled())
 		per_cpu(cpu_last_req_freq, policy->cpu) = clk_get_cpu_rate(policy->cpu);
@@ -622,7 +619,8 @@ int bL_cpufreq_register(struct cpufreq_arm_bL_ops *ops)
 		return -EBUSY;
 	}
 
-	if (!ops || !strlen(ops->name) || !ops->init_opp_table) {
+	if (!ops || !strlen(ops->name) || !ops->init_opp_table ||
+	    !ops->get_transition_latency) {
 		pr_err("%s: Invalid arm_bL_ops, exiting\n", __func__);
 		return -ENODEV;
 	}
diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index 10be285c9055..a1c3025f9df7 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -172,7 +172,6 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
 		return -EFAULT;
 	}
 
-	cpumask_set_cpu(policy->cpu, policy->cpus);
 	cpu->cur_policy = policy;
 
 	/* Set policy->cur to max now. The governors will adjust later. */
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 1c262923fe58..a020da7940d6 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -9,11 +9,16 @@
 
 #include <linux/err.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 
 #include "cpufreq-dt.h"
 
-static const struct of_device_id machines[] __initconst = {
+/*
+ * Machines for which the cpufreq device is *always* created, mostly used for
+ * platforms using "operating-points" (V1) property.
+ */
+static const struct of_device_id whitelist[] __initconst = {
 	{ .compatible = "allwinner,sun4i-a10", },
 	{ .compatible = "allwinner,sun5i-a10s", },
 	{ .compatible = "allwinner,sun5i-a13", },
@@ -22,7 +27,6 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "allwinner,sun6i-a31s", },
 	{ .compatible = "allwinner,sun7i-a20", },
 	{ .compatible = "allwinner,sun8i-a23", },
-	{ .compatible = "allwinner,sun8i-a33", },
 	{ .compatible = "allwinner,sun8i-a83t", },
 	{ .compatible = "allwinner,sun8i-h3", },
 
@@ -32,7 +36,6 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "arm,integrator-cp", },
 
 	{ .compatible = "hisilicon,hi3660", },
-	{ .compatible = "hisilicon,hi6220", },
 
 	{ .compatible = "fsl,imx27", },
 	{ .compatible = "fsl,imx51", },
@@ -46,11 +49,8 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "samsung,exynos3250", },
 	{ .compatible = "samsung,exynos4210", },
 	{ .compatible = "samsung,exynos4212", },
-	{ .compatible = "samsung,exynos4412", },
 	{ .compatible = "samsung,exynos5250", },
 #ifndef CONFIG_BL_SWITCHER
-	{ .compatible = "samsung,exynos5420", },
-	{ .compatible = "samsung,exynos5433", },
 	{ .compatible = "samsung,exynos5800", },
 #endif
 
@@ -67,6 +67,8 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "renesas,r8a7792", },
 	{ .compatible = "renesas,r8a7793", },
 	{ .compatible = "renesas,r8a7794", },
+	{ .compatible = "renesas,r8a7795", },
+	{ .compatible = "renesas,r8a7796", },
 	{ .compatible = "renesas,sh73a0", },
 
 	{ .compatible = "rockchip,rk2928", },
@@ -76,17 +78,17 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "rockchip,rk3188", },
 	{ .compatible = "rockchip,rk3228", },
 	{ .compatible = "rockchip,rk3288", },
+	{ .compatible = "rockchip,rk3328", },
 	{ .compatible = "rockchip,rk3366", },
 	{ .compatible = "rockchip,rk3368", },
 	{ .compatible = "rockchip,rk3399", },
 
-	{ .compatible = "sigma,tango4" },
-
-	{ .compatible = "socionext,uniphier-pro5", },
-	{ .compatible = "socionext,uniphier-pxs2", },
 	{ .compatible = "socionext,uniphier-ld6b", },
-	{ .compatible = "socionext,uniphier-ld11", },
-	{ .compatible = "socionext,uniphier-ld20", },
+
+	{ .compatible = "st-ericsson,u8500", },
+	{ .compatible = "st-ericsson,u8540", },
+	{ .compatible = "st-ericsson,u9500", },
+	{ .compatible = "st-ericsson,u9540", },
 
 	{ .compatible = "ti,omap2", },
 	{ .compatible = "ti,omap3", },
@@ -94,27 +96,56 @@ static const struct of_device_id machines[] __initconst = {
 	{ .compatible = "ti,omap5", },
 
 	{ .compatible = "xlnx,zynq-7000", },
+	{ .compatible = "xlnx,zynqmp", },
 
-	{ .compatible = "zte,zx296718", },
+	{ }
+};
 
+/*
+ * Machines for which the cpufreq device is *not* created, mostly used for
+ * platforms using "operating-points-v2" property.
+ */
+static const struct of_device_id blacklist[] __initconst = {
 	{ }
 };
 
+static bool __init cpu0_node_has_opp_v2_prop(void)
+{
+	struct device_node *np = of_cpu_device_node_get(0);
+	bool ret = false;
+
+	if (of_get_property(np, "operating-points-v2", NULL))
+		ret = true;
+
+	of_node_put(np);
+	return ret;
+}
+
 static int __init cpufreq_dt_platdev_init(void)
 {
 	struct device_node *np = of_find_node_by_path("/");
 	const struct of_device_id *match;
+	const void *data = NULL;
 
 	if (!np)
 		return -ENODEV;
 
-	match = of_match_node(machines, np);
+	match = of_match_node(whitelist, np);
+	if (match) {
+		data = match->data;
+		goto create_pdev;
+	}
+
+	if (cpu0_node_has_opp_v2_prop() && !of_match_node(blacklist, np))
+		goto create_pdev;
+
 	of_node_put(np);
-	if (!match)
-		return -ENODEV;
+	return -ENODEV;
 
+create_pdev:
+	of_node_put(np);
 	return PTR_ERR_OR_ZERO(platform_device_register_data(NULL, "cpufreq-dt",
-			       -1, match->data,
+			       -1, data,
 			       sizeof(struct cpufreq_dt_platform_data)));
 }
 device_initcall(cpufreq_dt_platdev_init);
diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c
index 5503d491b016..dbf82f36d270 100644
--- a/drivers/cpufreq/cpufreq-nforce2.c
+++ b/drivers/cpufreq/cpufreq-nforce2.c
@@ -357,7 +357,6 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
 	/* cpuinfo and default policy values */
 	policy->min = policy->cpuinfo.min_freq = min_fsb * fid * 100;
 	policy->max = policy->cpuinfo.max_freq = max_fsb * fid * 100;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 
 	return 0;
 }
@@ -369,6 +368,7 @@ static int nforce2_cpu_exit(struct cpufreq_policy *policy)
 
 static struct cpufreq_driver nforce2_driver = {
 	.name = "nforce2",
+	.flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
 	.verify = nforce2_verify,
 	.target = nforce2_target,
 	.get = nforce2_get,
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 9bf97a366029..c7ae67d6886d 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -524,6 +524,32 @@ unsigned int cpufreq_driver_resolve_freq(struct cpufreq_policy *policy,
 }
 EXPORT_SYMBOL_GPL(cpufreq_driver_resolve_freq);
 
+unsigned int cpufreq_policy_transition_delay_us(struct cpufreq_policy *policy)
+{
+	unsigned int latency;
+
+	if (policy->transition_delay_us)
+		return policy->transition_delay_us;
+
+	latency = policy->cpuinfo.transition_latency / NSEC_PER_USEC;
+	if (latency) {
+		/*
+		 * For platforms that can change the frequency very fast (< 10
+		 * us), the above formula gives a decent transition delay. But
+		 * for platforms where transition_latency is in milliseconds, it
+		 * ends up giving unrealistic values.
+		 *
+		 * Cap the default transition delay to 10 ms, which seems to be
+		 * a reasonable amount of time after which we should reevaluate
+		 * the frequency.
+		 */
+		return min(latency * LATENCY_MULTIPLIER, (unsigned int)10000);
+	}
+
+	return LATENCY_MULTIPLIER;
+}
+EXPORT_SYMBOL_GPL(cpufreq_policy_transition_delay_us);
+
 /*********************************************************************
  *                          SYSFS INTERFACE                          *
  *********************************************************************/
@@ -1988,13 +2014,13 @@ static int cpufreq_init_governor(struct cpufreq_policy *policy)
 	if (!policy->governor)
 		return -EINVAL;
 
-	if (policy->governor->max_transition_latency &&
-	    policy->cpuinfo.transition_latency >
-	    policy->governor->max_transition_latency) {
+	/* Platform doesn't want dynamic frequency switching ? */
+	if (policy->governor->dynamic_switching &&
+	    cpufreq_driver->flags & CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING) {
 		struct cpufreq_governor *gov = cpufreq_fallback_governor();
 
 		if (gov) {
-			pr_warn("%s governor failed, too long transition latency of HW, fallback to %s governor\n",
+			pr_warn("Can't use %s governor as dynamic switching is disallowed. Fallback to %s governor\n",
 				policy->governor->name, gov->name);
 			policy->governor = gov;
 		} else {
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 88220ff3e1c2..f20f20a77d4d 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/