Merge tag 'stm32-dt-for-v6.17-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt

STM32 DT for v6.17, round 1

Highlights:
----------

- MPU:
  - STM32MP13:
    -Add Ethernet MAC adress efuse support.

  - STMP32MP15:
    - Add stm32mp157f-DK2 board support. This board embedds the same
      conectivity devices, DDR ... than stm32mp157c-dk2.
      However there are two differences: STM32MP157F SoC which allows
      overdrive OPP and the SCMI support for system features like
      clocks and regulators.

  - STM32MP25:
    - Fix tick timer for low power use cases.
    - Add timer support.

* tag 'stm32-dt-for-v6.17-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  arm64: dts: st: remove empty line in stm32mp251.dtsi
  arm64: dts: st: fix timer used for ticks
  arm64: defconfig: Enable STM32 Octo Memory Manager and OcstoSPI driver
  ARM: dts: stm32: add stm32mp157f-dk2 board support
  dt-bindings: arm: stm32: add STM32MP157F-DK2 board compatible
  ARM: dts: stm32: optee async notif interrupt for MP15 scmi variants
  ARM: dts: stm32: use internal regulators bindings for MP15 scmi variants
  dt-bindings: regulator: Add STM32MP15 SCMI regulator identifiers
  ARM: dts: stm32: use 'typec' generic name for stusb1600 on stm32mp15xx-dkx
  ARM: dts: stm32: fullfill diversity with OPP for STM32M15xF SOCs
  ARM: dts: stm32: add system-clock-direction-out on stm32mp15xx-dkx
  arm64: defconfig: enable STM32 timers drivers
  arm64: dts: st: add timer nodes on stm32mp257f-ev1
  arm64: dts: st: add timer pins for stm32mp257f-ev1
  arm64: dts: st: add timer nodes on stm32mp251
  ARM: dts: stm32: Add nvmem-cells to ethernet nodes for constant mac-addresses

Link: https://lore.kernel.org/r/b3e3363b-1ea5-457c-b244-2cbe26f7d6e4@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

14 files changed, 1098 insertions, 7 deletions

diff --git a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
index 408532504a24..ad144c02eb7e 100644
--- a/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
+++ b/Documentation/devicetree/bindings/arm/stm32/stm32.yaml
@@ -121,6 +121,7 @@ properties:
               - st,stm32mp157a-dk1-scmi
               - st,stm32mp157c-dk2
               - st,stm32mp157c-dk2-scmi
+              - st,stm32mp157f-dk2
           - const: st,stm32mp157
 
       - items:
diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile
index cc9948b9870f..66d4f96da5dd 100644
--- a/arch/arm/boot/dts/st/Makefile
+++ b/arch/arm/boot/dts/st/Makefile
@@ -72,7 +72,8 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32mp157c-odyssey.dtb \
 	stm32mp157c-osd32mp1-red.dtb \
 	stm32mp157c-phycore-stm32mp1-3.dtb \
-	stm32mp157c-ultra-fly-sbc.dtb
+	stm32mp157c-ultra-fly-sbc.dtb \
+	stm32mp157f-dk2.dtb
 dtb-$(CONFIG_ARCH_U8500) += \
 	ste-snowball.dtb \
 	ste-hrefprev60-stuib.dtb \
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index 492bcf586361..ace9495b9b06 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -1614,6 +1614,8 @@
 				snps,axi-config = <&stmmac_axi_config_1>;
 				snps,tso;
 				access-controllers = <&etzpc 48>;
+				nvmem-cells = <&ethernet_mac1_address>;
+				nvmem-cell-names = "mac-address";
 				status = "disabled";
 
 				stmmac_axi_config_1: stmmac-axi-config {
diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
index e48838374f0d..49583137b597 100644
--- a/arch/arm/boot/dts/st/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -93,6 +93,8 @@
 		snps,axi-config = <&stmmac_axi_config_2>;
 		snps,tso;
 		access-controllers = <&etzpc 49>;
+		nvmem-cells = <&ethernet_mac2_address>;
+		nvmem-cell-names = "mac-address";
 		status = "disabled";
 
 		stmmac_axi_config_2: stmmac-axi-config {
diff --git a/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi b/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi
index dc3b09f2f2af..98552fe45d4e 100644
--- a/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15-scmi.dtsi
@@ -4,11 +4,15 @@
  * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
  */
 
+#include <dt-bindings/regulator/st,stm32mp15-regulator.h>
+
 / {
 	firmware {
 		optee: optee {
 			compatible = "linaro,optee-tz";
 			method = "smc";
+			interrupt-parent = <&intc>;
+			interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
 		};
 
 		scmi: scmi {
@@ -35,21 +39,21 @@
 					#size-cells = <0>;
 
 					scmi_reg11: regulator@0 {
-						reg = <0>;
+						reg = <VOLTD_SCMI_REG11>;
 						regulator-name = "reg11";
 						regulator-min-microvolt = <1100000>;
 						regulator-max-microvolt = <1100000>;
 					};
 
 					scmi_reg18: regulator@1 {
-						reg = <1>;
+						reg = <VOLTD_SCMI_REG18>;
 						regulator-name = "reg18";
 						regulator-min-microvolt = <1800000>;
 						regulator-max-microvolt = <1800000>;
 					};
 
 					scmi_usb33: regulator@2 {
-						reg = <2>;
+						reg = <VOLTD_SCMI_USB33>;
 						regulator-name = "usb33";
 						regulator-min-microvolt = <3300000>;
 						regulator-max-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/st/stm32mp157f-dk2-scmi.dtsi b/arch/arm/boot/dts/st/stm32mp157f-dk2-scmi.dtsi
new file mode 100644
index 000000000000..89de85a2eff3
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157f-dk2-scmi.dtsi
@@ -0,0 +1,196 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Amelie Delaunay <amelie.delaunay@foss.st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp15-scmi.dtsi"
+
+/ {
+	reserved-memory {
+		optee@de000000 {
+			reg = <0xde000000 0x2000000>;
+			no-map;
+		};
+	};
+
+	arm_wdt: watchdog {
+		compatible = "arm,smc-wdt";
+		arm,smc-id = <0xbc000000>;
+		status = "disabled";
+	};
+
+};
+
+&adc {
+	vdd-supply = <&scmi_vdd>;
+	vdda-supply = <&scmi_vdd>;
+};
+
+&cpu0 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cpu1 {
+	clocks = <&scmi_clk CK_SCMI_MPU>;
+};
+
+&cryp1 {
+	clocks = <&scmi_clk CK_SCMI_CRYP1>;
+	resets = <&scmi_reset RST_SCMI_CRYP1>;
+};
+
+&cs42l51 {
+	VL-supply = <&scmi_v3v3>;
+	VD-supply = <&scmi_v1v8_audio>;
+	VA-supply = <&scmi_v1v8_audio>;
+	VAHP-supply = <&scmi_v1v8_audio>;
+};
+
+&dsi {
+	phy-dsi-supply = <&scmi_reg18>;
+	clocks = <&rcc DSI>, <&scmi_clk CK_SCMI_HSE>, <&rcc DSI_PX>;
+};
+
+&gpioz {
+	clocks = <&scmi_clk CK_SCMI_GPIOZ>;
+};
+
+&hash1 {
+	clocks = <&scmi_clk CK_SCMI_HASH1>;
+	resets = <&scmi_reset RST_SCMI_HASH1>;
+};
+
+&i2c1 {
+	hdmi-transmitter@39 {
+		iovcc-supply = <&scmi_v3v3_hdmi>;
+		cvcc12-supply = <&scmi_v1v2_hdmi>;
+	};
+};
+
+&iwdg2 {
+	clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>;
+	status = "disabled";
+};
+
+&m4_rproc {
+	/delete-property/ st,syscfg-holdboot;
+	resets = <&scmi_reset RST_SCMI_MCU>,
+		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
+	reset-names = "mcu_rst", "hold_boot";
+};
+
+&mdma1 {
+	resets = <&scmi_reset RST_SCMI_MDMA>;
+};
+
+&optee {
+	interrupt-parent = <&intc>;
+	interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+};
+
+&pwr_regulators {
+	vdd-supply = <&scmi_vdd>;
+	vdd_3v3_usbfs-supply = <&scmi_vdd_usb>;
+	status = "disabled";
+};
+
+&rcc {
+	compatible = "st,stm32mp1-rcc-secure", "syscon";
+	clock-names = "hse", "hsi", "csi", "lse", "lsi";
+	clocks = <&scmi_clk CK_SCMI_HSE>,
+		 <&scmi_clk CK_SCMI_HSI>,
+		 <&scmi_clk CK_SCMI_CSI>,
+		 <&scmi_clk CK_SCMI_LSE>,
+		 <&scmi_clk CK_SCMI_LSI>;
+};
+
+&rng1 {
+	clocks = <&scmi_clk CK_SCMI_RNG1>;
+	resets = <&scmi_reset RST_SCMI_RNG1>;
+};
+
+&rtc {
+	clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>;
+};
+
+&scmi_reguls {
+	scmi_vddcore: regulator@3 {
+		reg = <VOLTD_SCMI_STPMIC1_BUCK1>;
+		regulator-name = "vddcore";
+	};
+
+	scmi_vdd: regulator@5 {
+		reg = <VOLTD_SCMI_STPMIC1_BUCK3>;
+		regulator-name = "vdd";
+	};
+
+	scmi_v3v3: regulator@6 {
+		reg = <VOLTD_SCMI_STPMIC1_BUCK4>;
+		regulator-name = "v3v3";
+	};
+
+	scmi_v1v8_audio: regulator@7 {
+		reg = <VOLTD_SCMI_STPMIC1_LDO1>;
+		regulator-name = "v1v8_audio";
+	};
+
+	scmi_v3v3_hdmi: regulator@8 {
+		reg = <VOLTD_SCMI_STPMIC1_LDO2>;
+		regulator-name = "v3v3_hdmi";
+	};
+
+	scmi_vdd_usb: regulator@a {
+		reg = <VOLTD_SCMI_STPMIC1_LDO4>;
+		regulator-name = "vdd_usb";
+	};
+
+	scmi_vdda: regulator@b {
+		reg = <VOLTD_SCMI_STPMIC1_LDO5>;
+		regulator-name = "vdda";
+	};
+
+	scmi_v1v2_hdmi: regulator@c {
+		reg = <VOLTD_SCMI_STPMIC1_LDO6>;
+		regulator-name = "v1v2_hdmi";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+	};
+
+	scmi_vbus_otg: regulator@f {
+		reg = <VOLTD_SCMI_STPMIC1_PWR_SW1>;
+		regulator-name = "vbus_otg";
+	 };
+
+	 scmi_vbus_sw: regulator@10 {
+		reg = <VOLTD_SCMI_STPMIC1_PWR_SW2>;
+		regulator-name = "vbus_sw";
+	 };
+};
+
+&sdmmc1 {
+	vmmc-supply = <&scmi_v3v3>;
+};
+
+&sdmmc3 {
+	vmmc-supply = <&scmi_v3v3>;
+};
+
+&usbh_ehci {
+	hub@1 {
+		vdd-supply = <&scmi_v3v3>;
+	};
+};
+
+&usbphyc_port0 {
+	phy-supply = <&scmi_vdd_usb>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&scmi_vdd_usb>;
+};
+
+&vrefbuf {
+	vdda-supply = <&scmi_vdd>;
+};
diff --git a/arch/arm/boot/dts/st/stm32mp157f-dk2.dts b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
new file mode 100644
index 000000000000..43375c4d62a3
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Amelie Delaunay <amelie.delaunay@foss.st.com> for STMicroelectronics.
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xf.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
+#include "stm32mp157f-dk2-scmi.dtsi"
+
+/ {
+	model = "STMicroelectronics STM32MP157F-DK2 Discovery Board";
+	compatible = "st,stm32mp157f-dk2", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		serial3 = &usart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpioh 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&arm_wdt {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&cryp1 {
+	status = "okay";
+};
+
+&dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "orisetech,otm8009a";
+		reg = <0>;
+		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
+		power-supply = <&scmi_v3v3>;
+		status = "okay";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_in {
+	remote-endpoint = <&ltdc_ep1_out>;
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
+&i2c1 {
+	touchscreen@38 {
+		compatible = "focaltech,ft6236";
+		reg = <0x38>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiof>;
+		touchscreen-size-x = <480>;
+		touchscreen-size-y = <800>;
+		status = "okay";
+	};
+};
+
+/* I2C4 is managed by OP-TEE */
+&i2c4 {
+	status = "disabled";
+
+	/* i2c4 subnodes, which won't be managed by Linux */
+	typec@28 {
+		status = "disabled";
+		connector {
+			status = "disabled";
+		};
+	};
+
+	stpmic@33 {
+		status = "disabled";
+	};
+};
+
+&ltdc {
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep1_out: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dsi_in>;
+		};
+	};
+};
+
+&rtc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rtc_rsvd_pins_a>;
+
+	rtc_lsco_pins_a: rtc-lsco-0 {
+		pins = "out2_rmp";
+		function = "lsco";
+	};
+};
+
+/* Wifi */
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	non-removable;
+	cap-sdio-irq;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&scmi_v3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	brcmf: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_lsco_pins_a>;
+	};
+};
+
+/* Bluetooth */
+&usart2 {
+	pinctrl-names = "default", "sleep", "idle";
+	pinctrl-0 = <&usart2_pins_c>;
+	pinctrl-1 = <&usart2_sleep_pins_c>;
+	pinctrl-2 = <&usart2_idle_pins_c>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		vbat-supply = <&scmi_v3v3>;
+		vddio-supply = <&scmi_v3v3>;
+	};
+};
+
+/* Since I2C4 is disabled, STUSB1600 is also disabled so there is no Type-C support */
+&usbotg_hs {
+	dr_mode = "peripheral";
+	role-switch-default-mode = "peripheral";
+	/*
+	 * Forcing dr_mode = "peripheral"/"role-switch-default-mode = "peripheral";
+	 * will cause the pull-up on D+/D- to be raised as soon as the OTG is configured at runtime,
+	 * regardless of the presence of VBUS. Notice that on self-powered devices like
+	 * stm32mp157f-dk2, this isn't compliant with the USB standard. That's why usbotg_hs is kept
+	 * disabled here.
+	 */
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/st/stm32mp15xf.dtsi b/arch/arm/boot/dts/st/stm32mp15xf.dtsi
new file mode 100644
index 000000000000..ffa55d64bea3
--- /dev/null
+++ b/arch/arm/boot/dts/st/stm32mp15xf.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
+ */
+
+&etzpc {
+	cryp1: cryp@54001000 {
+		compatible = "st,stm32mp1-cryp";
+		reg = <0x54001000 0x400>;
+		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rcc CRYP1>;
+		resets = <&rcc CRYP1_R>;
+		access-controllers = <&etzpc 9>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
index a5511b1f0ce3..46692d8f566a 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
@@ -254,7 +254,7 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 
-	stusb1600@28 {
+	stusb1600: typec@28 {
 		compatible = "st,stusb1600";
 		reg = <0x28>;
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
@@ -515,6 +515,7 @@
 				remote-endpoint = <&cs42l51_tx_endpoint>;
 				dai-format = "i2s";
 				mclk-fs = <256>;
+				system-clock-direction-out;
 				dai-tdm-slot-num = <2>;
 				dai-tdm-slot-width = <32>;
 			};
diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index aba90d555f4e..5ac9e72478dd 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -133,6 +133,53 @@
 		};
 	};
 
+	pwm3_pins_a: pwm3-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 15, AF7)>; /* TIM3_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm3_sleep_pins_a: pwm3-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 15, ANALOG)>; /* TIM3_CH2 */
+		};
+	};
+
+	pwm8_pins_a: pwm8-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 5, AF8)>, /* TIM8_CH1 */
+				 <STM32_PINMUX('J', 4, AF8)>; /* TIM8_CH4 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm8_sleep_pins_a: pwm8-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 5, ANALOG)>, /* TIM8_CH1 */
+				 <STM32_PINMUX('J', 4, ANALOG)>; /* TIM8_CH4 */
+		};
+	};
+
+	pwm12_pins_a: pwm12-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 11, AF9)>; /* TIM12_CH2 */
+			bias-pull-down;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm12_sleep_pins_a: pwm12-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 11, ANALOG)>; /* TIM12_CH2 */
+		};
+	};
+
 	sdmmc1_b4_pins_a: sdmmc1-b4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 4, AF10)>, /* SDMMC1_D0 */
@@ -209,6 +256,20 @@
 		};
 	};
 
+	tim10_counter_pins_a: tim10-counter-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 9, AF9)>; /* TIM10_CH1 */
+			bias-disable;
+		};
+	};
+
+	tim10_counter_sleep_pins_a: tim10-counter-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* TIM10_CH1 */
+			bias-disable;
+		};
+	};
+
 	usart2_pins_a: usart2-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('A', 4, AF6)>; /* USART2_TX */
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 8d87865850a7..303abf915b8e 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -150,7 +150,7 @@
 			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
-		always-on;
+		arm,no-tick-in-suspend;
 	};
 
 	soc@0 {
@@ -291,6 +291,273 @@
 			#access-controller-cells = <1>;
 			ranges;
 
+			timers2: timer@40000000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40000000 0x400>;
+				interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM2>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 1>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@1 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <1>;
+					status = "disabled";
+				};
+			};
+
+			timers3: timer@40010000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40010000 0x400>;
+				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM3>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 2>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@2 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <2>;
+					status = "disabled";
+				};
+			};
+
+			timers4: timer@40020000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40020000 0x400>;
+				interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM4>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 3>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@3 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <3>;
+					status = "disabled";
+				};
+			};
+
+			timers5: timer@40030000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40030000 0x400>;
+				interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM5>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 4>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@4 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <4>;
+					status = "disabled";
+				};
+			};
+
+			timers6: timer@40040000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40040000 0x400>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM6>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 5>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				timer@5 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <5>;
+					status = "disabled";
+				};
+			};
+
+			timers7: timer@40050000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40050000 0x400>;
+				interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM7>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 6>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				timer@6 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <6>;
+					status = "disabled";
+				};
+			};
+
+			timers12: timer@40060000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40060000 0x400>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM12>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 10>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@11 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <11>;
+					status = "disabled";
+				};
+			};
+
+			timers13: timer@40070000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40070000 0x400>;
+				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM13>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 11>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@12 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <12>;
+					status = "disabled";
+				};
+			};
+
+			timers14: timer@40080000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40080000 0x400>;
+				interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM14>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 12>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@13 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <13>;
+					status = "disabled";
+				};
+			};
+
 			lptimer1: timer@40090000 {
 				compatible = "st,stm32mp25-lptimer", "st,stm32-lptimer";
 				reg = <0x40090000 0x400>;
@@ -597,6 +864,136 @@
 				status = "disabled";
 			};
 
+			timers10: timer@401c0000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x401c0000 0x400>;
+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM10>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 8>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@9 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <9>;
+					status = "disabled";
+				};
+			};
+
+			timers11: timer@401d0000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x401d0000 0x400>;
+				interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "global";
+				clocks = <&rcc CK_KER_TIM11>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 9>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@10 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <10>;
+					status = "disabled";
+				};
+			};
+
+			timers1: timer@40200000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40200000 0x400>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "brk", "up", "trg-com", "cc";
+				clocks = <&rcc CK_KER_TIM1>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 0>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				counter {
+					compatible = "st,stm32mp25-timer-counter";
+					status = "disabled";
+				};
+
+				pwm {
+					compatible = "st,stm32mp25-pwm";
+					#pwm-cells = <3>;
+					status = "disabled";
+				};
+
+				timer@0 {
+					compatible = "st,stm32mp25-timer-trigger";
+					reg = <0>;
+					status = "disabled";
+				};
+			};
+
+			timers8: timer@40210000 {
+				compatible = "st,stm32mp25-timers";
+				reg = <0x40210000 0x400>;
+				interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "brk", "up", "trg-com", "cc";
+				clocks = <&rcc CK_KER_TIM8>;
+				clock-names = "int";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				access-controllers = <&rifsc 7>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				count