Merge tag 'imx-dt64-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree update for 5.6:

 - New board support: i.MX8MQ based Thor96 board, Google i.MX8MQ Phanbell
   board, LX2160A based Solidrun Clearfog CX and Honeycomb boards.
 - Add eLCDIF controller and missing SAI nodes for i.MX8MQ SoC.
 - Add Crypto CAAM support for i.MX8MM and i.MX8MN.
 - Drop unneeded "simple-bus" from anatop node on i.MX8MM and i.MX8MN.
 - Drop unused/undocumented "fsl,aips-bus" and "fsl,imx8mq-aips-bus"
   compatibles from i.MX8M SoCs.
 - Add DDR controller nodes for i.MX8M devices.
 - Add EEPROM description for imx8mq-hummingboard-pulse and
   imx8mq-sr-som boards.
 - Enable USB1 and TypeC support for imx8mn-evk board.
 - Add FlexSPI and QSPI support for a few Layerscape SoCs and boards.
 - Add External MDIO1 node and the two RGMII PHYs connected on LX2160A.
 - Add missing SAI devices and set SAIs into async mode on LS1028A.
 - Other random device additions and enhancement for various platforms.

* tag 'imx-dt64-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (35 commits)
  arm64: dts: imx8mn: Memory node should be in board DT
  arm64: dts: imx8mm: Memory node should be in board DT
  arm64: dts: imx8mn: add crypto node
  arm64: dts: imx8mq-hummingboard-pulse: add eeprom description
  arm64: dts: imx8mq-sr-som: add eeprom description
  arm64: dts: ls208xa: Update qspi node properties for LS2088ARDB
  arm64: dts: freescale: Add devicetree support for Thor96 board
  arm64: dts: imx8mq-librem5-devkit: add accelerometer and gyro sensor
  arm64: dts: imx8mm: Add Crypto CAAM support
  arm64: dts: freescale: add initial support for Google i.MX 8MQ Phanbell
  arm64: dts: ls1028a-rdb: enable emmc hs400 mode
  arm64: dts: ls1028a: Update edma compatible to fit eDMA driver
  arm64: dts: imx8m: drop "fsl,aips-bus" and "fsl,imx8mq-aips-bus"
  arm64: dts: imx8mm: Add missing mux options for UART1 and UART2 signals
  arm64: dts: lx2160a: add dts for CEX7 platforms
  arm64: dts: lx2160a: add emdio2 node
  arm64: dts: ls1028a: put SAIs into async mode
  arm64: dts: ls1028a: add missing sai nodes
  arm64: dts: imx8mn-evk: enable usb1 and typec support
  arm64: dts: imx8mn: Remove setting for IMX8MN_CLK_USB_CORE_REF
  ...

Link: https://lore.kernel.org/r/20200113034006.17430-5-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>

33 files changed, 1787 insertions, 55 deletions

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 38e344a2f0ff..bac293e6ee33 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -18,6 +18,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb
 
@@ -28,7 +30,9 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-hummingboard-pulse.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-librem5-devkit.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-phanbell.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 5b9d4b35dd35..ca409d907b36 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -123,6 +123,21 @@
 	status = "okay";
 };
 
+&fspi {
+	status = "okay";
+
+	mt35xu02g0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+		reg = <0>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 9720a190049f..afb55653850d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -93,9 +93,26 @@
 
 &esdhc1 {
 	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
 	status = "okay";
 };
 
+&fspi {
+	status = "okay";
+
+	mt35xu02g0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+		reg = <0>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 8e8a77eb596a..fdca34dee577 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -271,6 +271,19 @@
 			status = "disabled";
 		};
 
+		fspi: spi@20c0000 {
+			compatible = "nxp,lx2160a-fspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "fspi_base", "fspi_mmap";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "fspi_en", "fspi";
+			status = "disabled";
+		};
+
 		esdhc: mmc@2140000 {
 			compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
@@ -316,7 +329,7 @@
 
 		edma0: dma-controller@22c0000 {
 			#dma-cells = <2>;
-			compatible = "fsl,vf610-edma";
+			compatible = "fsl,ls1028a-edma";
 			reg = <0x0 0x22c0000 0x0 0x10000>,
 			      <0x0 0x22d0000 0x0 0x10000>,
 			      <0x0 0x22e0000 0x0 0x10000>;
@@ -528,6 +541,7 @@
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 4>,
 			       <&edma0 1 3>;
+			fsl,sai-asynchronous;
 			status = "disabled";
 		};
 
@@ -542,6 +556,22 @@
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 6>,
 			       <&edma0 1 5>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai3: audio-controller@f120000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf120000 0x0 0x10000>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 8>,
+			       <&edma0 1 7>;
+			fsl,sai-asynchronous;
 			status = "disabled";
 		};
 
@@ -556,6 +586,37 @@
 			dma-names = "tx", "rx";
 			dmas = <&edma0 1 10>,
 			       <&edma0 1 9>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai5: audio-controller@f140000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf140000 0x0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 12>,
+			       <&edma0 1 11>;
+			fsl,sai-asynchronous;
+			status = "disabled";
+		};
+
+		sai6: audio-controller@f150000 {
+			#sound-dai-cells = <0>;
+			compatible = "fsl,vf610-sai";
+			reg = <0x0 0xf150000 0x0 0x10000>;
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
+				 <&clockgen 4 1>, <&clockgen 4 1>;
+			clock-names = "bus", "mclk1", "mclk2", "mclk3";
+			dma-names = "tx", "rx";
+			dmas = <&edma0 1 14>,
+			       <&edma0 1 13>;
+			fsl,sai-asynchronous;
 			status = "disabled";
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
index 3595be0f2527..db3d303093f6 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-frwy.dts
@@ -112,6 +112,20 @@
 
 };
 
+&qspi {
+	status = "okay";
+
+	mt25qu512a0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
 #include "fsl-ls1046-post.dtsi"
 
 &fman0 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
index 0c742befb761..dbc23d6cd3b4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
@@ -101,23 +101,23 @@
 &qspi {
 	status = "okay";
 
-	qflash0: flash@0 {
-		compatible = "spansion,m25p80";
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <0>;
 	};
 
-	qflash1: flash@1 {
-		compatible = "spansion,m25p80";
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
 		#address-cells = <1>;
 		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
+		spi-max-frequency = <50000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
index 120e62dad154..41d8b15f25a5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts
@@ -143,6 +143,30 @@
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <1>;
+	};
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
index 90b198939251..4d77b345cebd 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
@@ -86,6 +86,30 @@
 	status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <0>;
+	};
+
+	s25fs512s1: flash@1 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		reg = <1>;
+	};
+};
+
 &sata {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index c676d0771762..594566265e3d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -375,6 +375,19 @@
 			status = "disabled";
 		};
 
+		qspi: spi@20c0000 {
+			compatible = "fsl,ls2080a-qspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+			      <0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "QuadSPI", "QuadSPI-memory";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "qspi_en", "qspi";
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			status = "disabled";
+		};
+
 		esdhc: esdhc@2140000 {
 			compatible = "fsl,ls1088a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x2140000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
index 6fd7f63085c9..d0d670227ae2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
@@ -108,7 +108,15 @@
 };
 
 &qspi {
-	status = "disabled";
+	status = "okay";
+
+	s25fs512s0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+	};
 };
 
 &sata0 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 7a0be8eaa84a..f96d06da96be 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -618,16 +618,16 @@
 		};
 
 		qspi: spi@20c0000 {
-			status = "disabled";
-			compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
+			compatible = "fsl,ls2080a-qspi";
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x0 0x20c0000 0x0 0x10000>,
 			      <0x0 0x20000000 0x0 0x10000000>;
 			reg-names = "QuadSPI", "QuadSPI-memory";
-			interrupts = <0 25 0x4>; /* Level high type */
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
 			clock-names = "qspi_en", "qspi";
+			status = "disabled";
 		};
 
 		pcie1: pcie@3400000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
new file mode 100644
index 000000000000..071e21678f77
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A-CEx7
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a.dtsi"
+
+/ {
+	model = "SolidRun LX2160A COM Express Type 7 module";
+	compatible = "solidrun,lx2160a-cex7", "fsl,lx2160a";
+
+	aliases {
+		crypto = &crypto;
+	};
+
+	sb_3v3: regulator-sb3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "RT7290";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+&crypto {
+	status = "okay";
+};
+
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	rgmii_phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-switch@77 {
+		compatible = "nxp,pca9547";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+
+		i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			fan-temperature-ctrlr@18 {
+				compatible = "ti,amc6821";
+				reg = <0x18>;
+				cooling-min-state = <0>;
+				cooling-max-state = <9>;
+				#cooling-cells = <2>;
+			};
+		};
+
+		i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			temperature-sensor@48 {
+				compatible = "nxp,sa56004";
+				reg = <0x48>;
+				vcc-supply = <&sb_3v3>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf2129";
+		reg = <0x51>;
+		// IRQ10_B
+		interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,m25p80";
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <8>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts
new file mode 100644
index 000000000000..86a9b771428d
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Clearfog CX board
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-clearfog-itx.dtsi"
+
+/ {
+	model = "SolidRun LX2160A Clearfog CX";
+	compatible = "solidrun,clearfog-cx",
+		"solidrun,lx2160a-cex7", "fsl,lx2160a";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
new file mode 100644
index 000000000000..f3741a32e868
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Clearfog ITX board; this contains the
+// common parts shared between the Clearfog CX and Honeycomb builds.
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-cex7.dtsi"
+
+/ {
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&emdio2 {
+	status = "okay";
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&sata0 {
+	status = "okay";
+};
+
+&sata1 {
+	status = "okay";
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&sata3 {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts
new file mode 100644
index 000000000000..fe19f3009ea5
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-honeycomb.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+//
+// Device Tree file for LX2160A Honeycomb board
+//
+// Copyright 2019 SolidRun Ltd.
+
+/dts-v1/;
+
+#include "fsl-lx2160a-clearfog-itx.dtsi"
+
+/ {
+	model = "SolidRun LX2160A Honeycomb";
+	compatible = "solidrun,honeycomb",
+		"solidrun,lx2160a-cex7", "fsl,lx2160a";
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index c2817b784232..51615de102fe 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -35,6 +35,34 @@
 	status = "okay";
 };
 
+&dpmac17 {
+	phy-handle = <&rgmii_phy1>;
+	phy-connection-type = "rgmii-id";
+};
+
+&dpmac18 {
+	phy-handle = <&rgmii_phy2>;
+	phy-connection-type = "rgmii-id";
+};
+
+&emdio1 {
+	status = "okay";
+
+	rgmii_phy1: ethernet-phy@1 {
+		/* AR8035 PHY */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x1>;
+		eee-broken-1000t;
+	};
+
+	rgmii_phy2: ethernet-phy@2 {
+		/* AR8035 PHY */
+		compatible = "ethernet-phy-id004d.d072";
+		reg = <0x2>;
+		eee-broken-1000t;
+	};
+};
+
 &esdhc0 {
 	sd-uhs-sdr104;
 	sd-uhs-sdr50;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index e883fe0fc1b7..e5ee5591e52b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -939,6 +939,27 @@
 			fsl,extts-fifo;
 		};
 
+		/* WRIOP0: 0x8b8_0000, E-MDIO1: 0x1_6000 */
+		emdio1: mdio@8b96000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b96000 0x0 0x1000>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			little-endian;
+			status = "disabled";
+		};
+
+		emdio2: mdio@8b97000 {
+			compatible = "fsl,fman-memac-mdio";
+			reg = <0x0 0x8b97000 0x0 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		fsl_mc: fsl-mc@80c000000 {
 			compatible = "fsl,qoriq-mc";
 			reg = <0x00000008 0x0c000000 0 0x40>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 28ab17a277bb..9e54747cf4e6 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -16,6 +16,11 @@
 		stdout-path = &uart2;
 	};
 
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0x80000000>;
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -77,6 +82,26 @@
 	cpu-supply = <&buck2_reg>;
 };
 
+&ddrc {
+	operating-points-v2 = <&ddrc_opp_table>;
+
+	ddrc_opp_table: opp-table {
+		compatible = "operating-points-v2";
+
+		opp-25M {
+			opp-hz = /bits/ 64 <25000000>;
+		};
+
+		opp-100M {
+			opp-hz = /bits/ 64 <100000000>;
+		};
+
+		opp-750M {
+			opp-hz = /bits/ 64 <750000000>;
+		};
+	};
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_fec1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
index cffa8991880d..5ccc4cc91959 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
+++ b/arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h
@@ -430,18 +430,26 @@
 #define MX8MM_IOMUXC_SAI1_MCLK_SIM_M_HRESP                                  0x1AC 0x414 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI2_RXFS_SAI2_RX_SYNC                                 0x1B0 0x418 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI2_RXFS_SAI5_TX_SYNC                                 0x1B0 0x418 0x4EC 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX                                 0x1B0 0x418 0x000 0x4 0x0
+#define MX8MM_IOMUXC_SAI2_RXFS_UART1_DTE_RX                                 0x1B0 0x418 0x4F4 0x4 0x2
 #define MX8MM_IOMUXC_SAI2_RXFS_GPIO4_IO21                                   0x1B0 0x418 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI2_RXFS_SIM_M_HSIZE0                                 0x1B0 0x418 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI2_RXC_SAI2_RX_BCLK                                  0x1B4 0x41C 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SAI2_RXC_SAI5_TX_BCLK                                  0x1B4 0x41C 0x4E8 0x1 0x2
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX                                  0x1B4 0x41C 0x4F4 0x4 0x3
+#define MX8MM_IOMUXC_SAI2_RXC_UART1_DTE_TX                                  0x1B4 0x41C 0x000 0x4 0x0
 #define MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22                                    0x1B4 0x41C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SAI2_RXC_SIM_M_HSIZE1                                  0x1B4 0x41C 0x000 0x7 0x0
 #define MX8MM_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0                                0x1B8 0x420 0x000 0x0 0x0