Merge tag 'qcom-arm64-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 DT updates for v5.6

* Align SDM845 firmware paths with linux-firmware
* Make WiFi work on Dragonboard845c
* Wire up wakeup controller for SDM845
* Critical thermal interrupt support for SDM845, MSM8996 and MSM8998
* Enable UFS for SM8150
* Add remoteproc enablers and nodes for SM8150
* Add CPUfreq for SM8150
* Add RPMH power-domain node for SM8150
* Cleanup and refactor MSM8996 dts structure
* Add initial Inforce Computing IFC6640 dts
* Increase MSM8996 core voltage
* Fix MSM8996 USB phy settings
* Add missing alias for BLSP UART in MSM8998 MTP
* Add remoteproc nodes for ADSP, modem and sensor core for MSM8998
* Enable WiFI for MSM8998
* Introduce the SC7180 platform and the IDP development board
* Add CPUfreq, QUPs, USB, remoteproc etc for SC7180
* Enable USB OTG for Dragonboard 410c
* Add vibrator motor node for PM8916
* Properly specify APCS clocks for MSM8916
* Add CPR and HFPLL for QCS404
* Enable full CPUfreq (with AVS) for QCS404

* tag 'qcom-arm64-for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (88 commits)
  arm64: dts: qcom: sdm845: move gpu zap nodes to per-device dts
  arm64: dts: qcom: sm8150: Hard code rpmhpd constants
  arm64: dts: apq8096-db820c: Fix VDD core voltage
  arm64: dts: qcom: qcs404-evb: Set vdd_apc regulator in high power mode
  arm64: dts: qcom: msm8998-mtp: Add alias for blsp1_uart3
  arm64: dts: qcom: sc7180: Add critical interrupt and cooling maps for TSENS in SC7180
  arm64: dts: qcom: msm8996: Fix venus iommu nodename error
  arm64: dts: qcom: sdm845: add the ufs reset
  arm64: dts: qcom: sm8150: Fix UFS phy register size
  arm64: dts: qcom: sm8150-mtp: Add UFS gpio reset
  arm64: dts: qcom: qcs404: Add CPR and populate OPP table
  arm64: dts: qcom: qcs404: Add DVFS support
  arm64: dts: qcom: qcs404: Add the clocks for APCS mux/divider
  arm64: dts: qcom: qcs404: Add HFPLL node
  arm64: dts: qcom: msm8916: Add the clocks for the APCS mux/divider
  arm64: dts: qcom: sc7180: Add rpmh power-domain node
  arm64: dts: pm8004: Add SPMI regulator and add phandles to lsids
  arm64: dts: msm8998: thermal: Add critical interrupt support
  arm64: dts: msm8996: thermal: Add critical interrupt support
  arm64: dts: qcom: db845c: Move remoteproc firmware to sdm845
  ...

Link: https://lore.kernel.org/r/20200113204225.GB3325@yoga
Signed-off-by: Olof Johansson <olof@lixom.net>

30 files changed, 6499 insertions, 2355 deletions

diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index e39d8f02e33c..529d924931f1 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -24,28 +24,30 @@ description: |
 
   The 'SoC' element must be one of the following strings:
 
-  	apq8016
-  	apq8074
-  	apq8084
-  	apq8096
-  	msm8916
-  	msm8974
-  	msm8992
-  	msm8994
-  	msm8996
-  	mdm9615
-  	ipq8074
-  	sdm845
+        apq8016
+        apq8074
+        apq8084
+        apq8096
+        ipq8074
+        mdm9615
+        msm8916
+        msm8974
+        msm8992
+        msm8994
+        msm8996
+        sc7180
+        sdm845
 
   The 'board' element must be one of the following strings:
 
-  	cdp
-  	liquid
-  	dragonboard
-  	mtp
-  	sbc
-  	hk01
-  	qrd
+        cdp
+        dragonboard
+        hk01
+        idp
+        liquid
+        mtp
+        qrd
+        sbc
 
   The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
   where the minor number may be omitted when it's zero, i.e.  v1.0 is the same
@@ -144,4 +146,8 @@ properties:
               - qcom,ipq8074-hk01
           - const: qcom,ipq8074
 
+      - items:
+          - enum:
+              - qcom,sc7180-idp
+          - const: qcom,sc7180
 ...
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 6498a1ec893f..973c0f079659 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8016-sbc.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
+dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq8074-hk01.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8150.dtb
@@ -13,6 +14,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-hp-envy-x2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-lenovo-miix-630.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
index ec2f0de67993..aff218c1b7b6 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -8,6 +8,15 @@
 		pinconf {
 			pins = "gpio3";
 			function = PMIC_GPIO_FUNC_NORMAL;
+			input-disable;
+			output-high;
+		};
+	};
+
+	usb_hub_reset_pm_device: usb_hub_reset_pm_device {
+		pinconf {
+			pins = "gpio3";
+			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
 		};
 	};
@@ -22,6 +31,16 @@
 		};
 	};
 
+	usb_sw_sel_pm_device: usb_sw_sel_pm_device {
+		pinconf {
+			pins = "gpio4";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			power-source = <PM8916_GPIO_VPH>;
+			input-disable;
+			output-low;
+		};
+	};
+
 	pm8916_gpios_leds: pm8916_gpios_leds {
 		pinconf {
 			pins = "gpio1", "gpio2";
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index e12a36ce5d93..037e26b3f8d5 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -358,14 +358,15 @@
 		};
 
 		usb@78d9000 {
-			extcon = <&usb_id>;
+			extcon = <&usb_id>, <&usb_id>;
 			status = "okay";
 			adp-disable;
 			hnp-disable;
 			srp-disable;
-			dr_mode = "host";
-			pinctrl-names = "default";
-			pinctrl-0 = <&usb_sw_sel_pm>;
+			dr_mode = "otg";
+			pinctrl-names = "default", "device";
+			pinctrl-0 = <&usb_sw_sel_pm &usb_hub_reset_pm>;
+			pinctrl-1 = <&usb_sw_sel_pm_device &usb_hub_reset_pm_device>;
 			ulpi {
 				phy {
 					v1p8-supply = <&pm8916_l7>;
@@ -504,7 +505,7 @@
 
 	usb_id: usb-id {
 		compatible = "linux,extcon-usb-gpio";
-		vbus-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
+		id-gpio = <&msmgpio 121 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&usb_id_default>;
 	};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
deleted file mode 100644
index a5cc80d6e82f..000000000000
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pins.dtsi
+++ /dev/null
@@ -1,109 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
- */
-&msmgpio {
-	sdc2_cd_on: sdc2_cd_on {
-		mux {
-			pins = "gpio38";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio38";
-			bias-pull-up;		/* pull up */
-			drive-strength = <16>;	/* 16 MA */
-		};
-	};
-
-	sdc2_cd_off: sdc2_cd_off {
-		mux {
-			pins = "gpio38";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio38";
-			bias-pull-up;		/* pull up */
-			drive-strength = <2>;	/* 2 MA */
-		};
-	};
-
-	blsp1_uart1_default: blsp1_uart1_default {
-		mux {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			function = "blsp_uart2";
-		};
-
-		config {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			drive-strength = <16>;
-			bias-disable;
-		};
-	};
-
-	blsp1_uart1_sleep: blsp1_uart1_sleep {
-		mux {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			function = "gpio";
-		};
-
-		config {
-			pins = "gpio41", "gpio42", "gpio43", "gpio44";
-			drive-strength = <2>;
-			bias-disable;
-		};
-	};
-
-	hdmi_hpd_active: hdmi_hpd_active {
-		mux {
-			pins = "gpio34";
-			function = "hdmi_hot";
-		};
-
-		config {
-			pins = "gpio34";
-			bias-pull-down;
-			drive-strength = <16>;
-		};
-	};
-
-	hdmi_hpd_suspend: hdmi_hpd_suspend {
-		mux {
-			pins = "gpio34";
-			function = "hdmi_hot";
-		};
-
-		config {
-			pins = "gpio34";
-			bias-pull-down;
-			drive-strength = <2>;
-		};
-	};
-
-	hdmi_ddc_active: hdmi_ddc_active {
-		mux {
-			pins = "gpio32", "gpio33";
-			function = "hdmi_ddc";
-		};
-
-		config {
-			pins = "gpio32", "gpio33";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	hdmi_ddc_suspend: hdmi_ddc_suspend {
-		mux {
-			pins = "gpio32", "gpio33";
-			function = "hdmi_ddc";
-		};
-
-		config {
-			pins = "gpio32", "gpio33";
-			drive-strength = <2>;
-			bias-pull-down;
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
deleted file mode 100644
index 31a3e3311ad5..000000000000
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi
+++ /dev/null
@@ -1,92 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-&pm8994_gpios {
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&ls_exp_gpio_f &bt_en_gpios>;
-
-	ls_exp_gpio_f: pm8994_gpio5 {
-		pinconf {
-			pins = "gpio5";
-			output-low;
-			power-source = <2>; // PM8994_GPIO_S4, 1.8V
-		};
-	};
-
-	bt_en_gpios: bt_en_gpios {
-		pinconf {
-			pins = "gpio19";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			bias-pull-down;
-		};
-	};
-
-	wlan_en_gpios: wlan_en_gpios {
-		pinconf {
-			pins = "gpio8";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-			bias-pull-down;
-		};
-	};
-
-	audio_mclk: clk_div1 {
-		pinconf {
-			pins = "gpio15";
-			function = "func1";
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-
-	volume_up_gpio: pm8996_gpio2 {
-		pinconf {
-			pins = "gpio2";
-			function = "normal";
-			input-enable;
-			drive-push-pull;
-			bias-pull-up;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-
-	divclk4_pin_a: divclk4 {
-		pinconf {
-			pins = "gpio18";
-			function = PMIC_GPIO_FUNC_FUNC2;
-
-			bias-disable;
-			power-source = <PM8994_GPIO_S4>;
-		};
-	};
-
-	usb3_vbus_det_gpio: pm8996_gpio22 {
-		pinconf {
-			pins = "gpio22";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-enable;
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-};
-
-&pmi8994_gpios {
-	usb2_vbus_det_gpio: pmi8996_gpio6 {
-		pinconf {
-			pins = "gpio6";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-enable;
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-			power-source = <PM8994_GPIO_S4>; // 1.8V
-		};
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index dba3488492f1..fff6115f2670 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -6,10 +6,9 @@
 #include "msm8996.dtsi"
 #include "pm8994.dtsi"
 #include "pmi8994.dtsi"
-#include "apq8096-db820c-pins.dtsi"
-#include "apq8096-db820c-pmic-pins.dtsi"
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
 
@@ -78,611 +77,837 @@
 		};
 	};
 
-	soc {
-		serial@7570000 {
-			label = "BT-UART";
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp1_uart1_default>;
-			pinctrl-1 = <&blsp1_uart1_sleep>;
-
-			bluetooth {
-				compatible = "qcom,qca6174-bt";
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
 
-				/* bt_disable_n gpio */
-				enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&volume_up_gpio>;
 
-				clocks = <&divclk4>;
-			};
+		button@0 {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
 		};
+	};
 
-		serial@75b0000 {
-			label = "LS-UART1";
-			status = "okay";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_uart1_2pins_default>;
-			pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
-		};
-
-		serial@75b1000 {
-			label = "LS-UART0";
-			status = "disabled";
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&blsp2_uart2_4pins_default>;
-			pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
-		};
-
-		i2c@7577000 {
-		/* On Low speed expansion */
-			label = "LS-I2C0";
-			status = "okay";
-		};
-
-		i2c@75b6000 {
-		/* On Low speed expansion */
-			label = "LS-I2C1";
-			status = "okay";
-		};
-
-		spi@7575000 {
-		/* On Low speed expansion */
-			label = "LS-SPI0";
-			status = "okay";
-		};
-
-		i2c@75b5000 {
-		/* On High speed expansion */
-			label = "HS-I2C2";
-			status = "okay";
-		};
-
-		spi@75ba000{
-		/* On High speed expansion */
-			label = "HS-SPI1";
-			status = "okay";
-		};
-
-		sdhci@74a4900 {
-		/* External SD card */
-			pinctrl-names = "default", "sleep";
-			pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
-			pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
-			cd-gpios = <&msmgpio 38 0x1>;
-			vmmc-supply = <&pm8994_l21>;
-			vqmmc-supply = <&pm8994_l13>;
-			status = "okay";
-		};
-
-		phy@627000 {
-			status = "okay";
-		};
-
-		ufshc@624000 {
-			status = "okay";
-		};
-
-		pinctrl@1010000 {
-			gpio-line-names =
-				"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
-				"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
-				"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
-				"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
-				"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
-				"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
-				"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
-				"[I2C1_SCL]", /* GPIO_7, BLSP8_I2C_SCL, LSEC pin 19 */
-				"GPIO-H", /* GPIO_8, LCD0_RESET_N, LSEC pin 30 */
-				"TP93", /* GPIO_9 */
-				"GPIO-G", /* GPIO_10, MDP_VSYNC_P, LSEC pin 29 */
-				"[MDP_VSYNC_S]", /* GPIO_11, S HSEC pin 55 */
-				"NC", /* GPIO_12 */
-				"[CSI0_MCLK]", /* GPIO_13, CAM_MCLK0, P HSEC pin 15 */
-				"[CAM_MCLK1]", /* GPIO_14, J14 pin 11 */
-				"[CSI1_MCLK]", /* GPIO_15, CAM_MCLK2, P HSEC pin 17 */
-				"TP99", /* GPIO_16 */
-				"[I2C2_SDA]", /* GPIO_17, CCI_I2C_SDA0, P HSEC pin 34 */
-				"[I2C2_SCL]", /* GPIO_18, CCI_I2C_SCL0, P HSEC pin 32 */
-				"[CCI_I2C_SDA1]", /* GPIO_19, S HSEC pin 38 */
-				"[CCI_I2C_SCL1]", /* GPIO_20, S HSEC pin 36 */
-				"FLASH_STROBE_EN", /* GPIO_21, S HSEC pin 5 */
-				"FLASH_STROBE_TRIG", /* GPIO_22, S HSEC pin 1 */
-				"GPIO-K", /* GPIO_23, CAM2_RST_N, LSEC pin 33 */
-				"GPIO-D", /* GPIO_24, LSEC pin 26 */
-				"GPIO-I", /* GPIO_25, CAM0_RST_N, LSEC pin 31 */
-				"GPIO-J", /* GPIO_26, CAM0_STANDBY_N, LSEC pin 32 */
-				"BLSP6_I2C_SDA", /* GPIO_27 */
-				"BLSP6_I2C_SCL", /* GPIO_28 */
-				"GPIO-B", /* GPIO_29, TS0_RESET_N, LSEC pin 24 */
-				"GPIO30", /* GPIO_30, S HSEC pin 4 */
-				"HDMI_CEC", /* GPIO_31 */
-				"HDMI_DDC_CLOCK", /* GPIO_32 */
-				"HDMI_DDC_DATA", /* GPIO_33 */
-				"HDMI_HOT_PLUG_DETECT", /* GPIO_34 */
-				"PCIE0_RST_N", /* GPIO_35 */
-				"PCIE0_CLKREQ_N", /* GPIO_36 */
-				"PCIE0_WAKE", /* GPIO_37 */
-				"SD_CARD_DET_N", /* GPIO_38 */
-				"TSIF1_SYNC", /* GPIO_39, S HSEC pin 48 */
-				"W_DISABLE_N", /* GPIO_40 */
-				"[BLSP9_UART_TX]", /* GPIO_41 */
-				"[BLSP9_UART_RX]", /* GPIO_42 */
-				"[BLSP2_UART_CTS_N]", /* GPIO_43 */
-				"[BLSP2_UART_RFR_N]", /* GPIO_44 */
-				"[BLSP3_UART_TX]", /* GPIO_45 */
-				"[BLSP3_UART_RX]", /* GPIO_46 */
-				"[I2C0_SDA]", /* GPIO_47, LS_I2C0_SDA, LSEC pin 17 */
-				"[I2C0_SCL]", /* GPIO_48, LS_I2C0_SCL, LSEC pin 15 */
-				"[UART0_TxD]", /* GPIO_49, BLSP9_UART_TX, LSEC pin 5 */
-				"[UART0_RxD]", /* GPIO_50, BLSP9_UART_RX, LSEC pin 7 */
-				"[UART0_CTS]", /* GPIO_51, BLSP9_UART_CTS_N, LSEC pin 3 */
-				"[UART0_RTS]", /* GPIO_52, BLSP9_UART_RFR_N, LSEC pin 9 */
-				"[CODEC_INT1_N]", /* GPIO_53 */
-				"[CODEC_INT2_N]", /* GPIO_54 */
-				"[BLSP7_I2C_SDA]", /* GPIO_55 */
-				"[BLSP7_I2C_SCL]", /* GPIO_56 */
-				"MI2S_MCLK", /* GPIO_57, S HSEC pin 3 */
-				"[PCM_CLK]", /* GPIO_58, QUA_MI2S_SCK, LSEC pin 18 */
-				"[PCM_FS]", /* GPIO_59, QUA_MI2S_WS, LSEC pin 16 */
-				"[PCM_DO]", /* GPIO_60, QUA_MI2S_DATA0, LSEC pin 20 */
-				"[PCM_DI]", /* GPIO_61, QUA_MI2S_DATA1, LSEC pin 22 */
-				"GPIO-E", /* GPIO_62, LSEC pin 27 */
-				"TP87", /* GPIO_63 */
-				"[CODEC_RST_N]", /* GPIO_64 */
-				"[PCM1_CLK]", /* GPIO_65 */
-				"[PCM1_SYNC]", /* GPIO_66 */
-				"[PCM1_DIN]", /* GPIO_67 */
-				"[PCM1_DOUT]", /* GPIO_68 */
-				"AUDIO_REF_CLK", /* GPIO_69 */
-				"SLIMBUS_CLK", /* GPIO_70 */
-				"SLIMBUS_DATA0", /* GPIO_71 */
-				"SLIMBUS_DATA1", /* GPIO_72 */
-				"NC", /* GPIO_73 */
-				"NC", /* GPIO_74 */
-				"NC", /* GPIO_75 */
-				"NC", /* GPIO_76 */
-				"TP94", /* GPIO_77 */
-				"NC", /* GPIO_78 */
-				"TP95", /* GPIO_79 */
-				"GPIO-A", /* GPIO_80, MEMS_RESET_N, LSEC pin 23 */
-				"TP88", /* GPIO_81 */
-				"TP89", /* GPIO_82 */
-				"TP90", /* GPIO_83 */
-				"TP91", /* GPIO_84 */
-				"[SD_DAT0]", /* GPIO_85, BLSP12_SPI_MOSI, P HSEC pin 1 */
-				"[SD_CMD]", /* GPIO_86, BLSP12_SPI_MISO, P HSEC pin 11 */
-				"[SD_DAT3]", /* GPIO_87, BLSP12_SPI_CS_N, P HSEC pin 7 */
-				"[SD_SCLK]", /* GPIO_88, BLSP12_SPI_CLK, P HSEC pin 9 */
-				"TSIF1_CLK", /* GPIO_89, S HSEC pin 42 */
-				"TSIF1_EN", /* GPIO_90, S HSEC pin 46 */
-				"TSIF1_DATA", /* GPIO_91, S HSEC pin 44 */
-				"NC", /* GPIO_92 */
-				"TSIF2_CLK", /* GPIO_93, S HSEC pin 52 */
-				"TSIF2_EN", /* GPIO_94, S HSEC pin 56 */
-				"TSIF2_DATA", /* GPIO_95, S HSEC pin 54 */
-				"TSIF2_SYNC", /* GPIO_96, S HSEC pin 58 */
-				"NC", /* GPIO_97 */
-				"CAM1_STANDBY_N", /* GPIO_98 */
-				"NC", /* GPIO_99 */
-				"NC", /* GPIO_100 */
-				"[LCD1_RESET_N]", /* GPIO_101, S HSEC pin 51 */
-				"BOOT_CONFIG1", /* GPIO_102 */
-				"USB_HUB_RESET", /* GPIO_103 */
-				"CAM1_RST_N", /* GPIO_104 */
-				"NC", /* GPIO_105 */
-				"NC", /* GPIO_106 */
-				"NC", /* GPIO_107 */
-				"NC", /* GPIO_108 */
-				"NC", /* GPIO_109 */
-				"NC", /* GPIO_110 */
-				"NC", /* GPIO_111 */
-				"NC", /* GPIO_112 */
-				"PMI8994_BUA", /* GPIO_113 */
-				"PCIE2_RST_N", /* GPIO_114 */
-				"PCIE2_CLKREQ_N", /* GPIO_115 */
-				"PCIE2_WAKE", /* GPIO_116 */
-				"SSC_IRQ_0", /* GPIO_117 */
-				"SSC_IRQ_1", /* GPIO_118 */
-				"SSC_IRQ_2", /* GPIO_119 */
-				"NC", /* GPIO_120 */
-				"GPIO121", /* GPIO_121, S HSEC pin 2 */
-				"NC", /* GPIO_122 */
-				"SSC_IRQ_6", /* GPIO_123 */
-				"SSC_IRQ_7", /* GPIO_124 */
-				"GPIO-C", /* GPIO_125, TS_INT0, LSEC pin 25 */
-				"BOOT_CONFIG5", /* GPIO_126 */
-				"NC", /* GPIO_127 */
-				"NC", /* GPIO_128 */
-				"BOOT_CONFIG7", /* GPIO_129 */
-				"PCIE1_RST_N", /* GPIO_130 */
-				"PCIE1_CLKREQ_N", /* GPIO_131 */
-				"PCIE1_WAKE", /* GPIO_132 */
-				"GPIO-L", /* GPIO_133, CAM2_STANDBY_N, LSEC pin 34 */
-				"NC", /* GPIO_134 */
-				"NC", /* GPIO_135 */
-				"BOOT_CONFIG8", /* GPIO_136 */
-				"NC", /* GPIO_137 */
-				"NC", /* GPIO_138 */
-				"GPS_SSBI2", /* GPIO_139 */
-				"GPS_SSBI1", /* GPIO_140 */
-				"NC", /* GPIO_141 */
-				"NC", /* GPIO_142 */
-				"NC", /* GPIO_143 */
-				"BOOT_CONFIG6", /* GPIO_144 */
-				"NC", /* GPIO_145 */
-				"NC", /* GPIO_146 */
-				"NC", /* GPIO_147 */
-				"NC", /* GPIO_148 */
-				"NC"; /* GPIO_149 */
-		};
-
-		qcom,spmi@400f000 {
-			pmic@0 {
-				gpios@c000 {
-					gpio-line-names =
-						"NC",
-						"KEY_VOLP_N",
-						"NC",
-						"BL1_PWM",
-						"GPIO-F", /* BL0_PWM, LSEC pin 28 */
-						"BL1_EN",
-						"NC",
-						"WLAN_EN",
-						"NC",
-						"NC",
-						"NC",
-						"NC",
-						"NC",
-						"NC",
-						"DIVCLK1",
-						"DIVCLK2",
-						"DIVCLK3",
-						"DIVCLK4",
-						"BT_EN",
-						"PMIC_SLB",
-						"PMIC_BUA",
-						"USB_VBUS_DET";
-				};
-
-				mpps@a000 {
-					gpio-line-names =
-						"VDDPX_BIAS",
-						"WIFI_LED",
-						"NC",
-						"BT_LED",
-						"PM_MPP05",
-						"PM_MPP06",
-						"PM_MPP07",
-						"NC";
-				};
-			};
+	usb2_id: usb2-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pmi8994_gpios 6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb2_vbus_det_gpio>;
+	};
 
-			pmic@2 {
-				gpios@c000 {
-					gpio-line-names =
-						"NC",
-						"SPKR_AMP_EN1",
-						"SPKR_AMP_EN2",
-						"TP61",
-						"NC",
-						"USB2_VBUS_DET",
-						"NC",
-						"NC",
-						"NC",
-						"NC";
-				};
-			};
-		};
+	usb3_id: usb3-id {
+		compatible = "linux,extcon-usb-gpio";
+		id-gpio = <&pm8994_gpios 22 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb3_vbus_det_gpio>;
+	};
 
-		phy@34000 {
-			status = "okay";
-		};
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	vreg_s8a_l3a_input: vreg-s8a-l3a-input {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_s8a_l3a_input";
+		regulator-always-on;
+		regulator-boot-on;
+
+		regulator-min-microvolt = <0>;
+		regulator-max-microvolt = <0>;
+	};
+
+	wlan_en: wlan-en-1-8v {
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en_gpios>;
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8994_gpios 8 0>;
+
+		/* WLAN card specific delay */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+};
+
+&blsp1_i2c2 {
+	/* On Low speed expansion */
+	label = "LS-I2C0";
+	status = "okay";
+};
+
+&blsp1_spi0 {
+	/* On Low speed expansion */
+	label = "LS-SPI0";
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	label = "BT-UART";
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp1_uart1_default>;
+	pinctrl-1 = <&blsp1_uart1_sleep>;
+
+	bluetooth {
+		compatible = "qcom,qca6174-bt";
+
+		/* bt_disable_n gpio */
+		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+
+		clocks = <&divclk4>;
+	};
+};
+
+&blsp2_i2c0 {
+	/* On High speed expansion */
+	label = "HS-I2C2";
+	status = "okay";
+};
+
+&blsp2_i2c1 {
+	/* On Low speed expansion */
+	label = "LS-I2C1";
+	status = "okay";
+};
+
+&blsp2_spi5 {
+	/* On High speed expansion */
+	label = "HS-SPI1";
+	status = "okay";
+};
+
+&blsp2_uart1 {
+	label = "LS-UART1";
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart1_2pins_default>;
+	pinctrl-1 = <&blsp2_uart1_2pins_sleep>;
+};
+
+&blsp2_uart2 {
+	label = "LS-UART0";
+	status = "disabled";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&blsp2_uart2_4pins_default>;
+	pinctrl-1 = <&blsp2_uart2_4pins_sleep>;
+};
+
+&camss {
+	vdda-supply = <&vreg_l2a_1p25>;
+};
+
+&hdmi {
+	status = "okay";
+
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&hdmi_hpd_active &hdmi_ddc_active>;
+	pinctrl-1 = <&hdmi_hpd_suspend &hdmi_ddc_suspend>;
+
+	core-vdda-supply = <&vreg_l12a_1p8>;
+	core-vcc-supply = <&vreg_s4a_1p8>;
+};
+
+&hdmi_phy {
+	status = "okay";
+
+	vddio-supply = <&vreg_l12a_1p8>;
+	vcca-supply = <&vreg_l28a_0p925>;
+	#phy-cells = <0>;
+};
+
+&hsusb_phy1 {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&hsusb_phy2 {
+	status = "okay";
+
+	vdda-pll-supply = <&vreg_l12a_1p8>;
+	vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&mdp {
+	status = "okay";
+};
+
+&mdss {
+	status = "okay";
+};
 
-		phy@7410000 {
-			status = "okay";
+&msmgpio {
+	gpio-line-names =
+		"[SPI0_DOUT]", /* GPIO_0, BLSP1_SPI_MOSI, LSEC pin 14 */
+		"[SPI0_DIN]", /* GPIO_1, BLSP1_SPI_MISO, LSEC pin 10 */
+		"[SPI0_CS]", /* GPIO_2, BLSP1_SPI_CS_N, LSEC pin 12 */
+		"[SPI0_SCLK]", /* GPIO_3, BLSP1_SPI_CLK, LSEC pin 8 */
+		"[UART1_TxD]", /* GPIO_4, BLSP8_UART_TX, LSEC pin 11 */
+		"[UART1_RxD]", /* GPIO_5, BLSP8_UART_RX, LSEC pin 13 */
+		"[I2C1_SDA]", /* GPIO_6, BLSP8_I2C_SDA, LSEC pin 21 */
+		"[I2C1_SCL]", /* GPIO_7, BLSP8