/include/uapi/drm/

0x01e1 } }, {"Cobalt Microserver", 0, 0x10, 0xE0, {0x1e00, /* 0 == controller #, 1e == offset */ 0x0000, /* 0 == high offset, 0 == gap */ 0x0800, /* Default Autoselect */ 0x8001, /* 1 leaf, extended type, bogus len */ 0x0003, /* Type 3 (MII), PHY #0 */ 0x0400, /* 0 init instr, 4 reset instr */ 0x0801, /* Set control mode, GP0 output */ 0x0000, /* Drive GP0 Low (RST is active low) */ 0x0800, /* control mode, GP0 input (undriven) */ 0x0000, /* clear control mode */ 0x7800, /* 100TX FDX + HDX, 10bT FDX + HDX */ 0x01e0, /* Advertise all above */ 0x5000, /* FDX all above */ 0x1800, /* Set fast TTM in 100bt modes */ 0x0000, /* PHY cannot be unplugged */ }}, {NULL}}; static const char *const block_name[] __devinitconst = { "21140 non-MII", "21140 MII PHY", "21142 Serial PHY", "21142 MII PHY", "21143 SYM PHY", "21143 reset method" }; /** * tulip_build_fake_mediatable - Build a fake mediatable entry. * @tp: Ptr to the tulip private data. * * Some cards like the 3x5 HSC cards (J3514A) do not have a standard * srom and can not be handled under the fixup routine. These cards * still need a valid mediatable entry for correct csr12 setup and * mii handling. * * Since this is currently a parisc-linux spec