// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */ /dts-v1/; #include "talos-evk-som.dtsi" / { model = "Qualcomm QCS615 IQ 615 EVK"; compatible = "qcom,talos-evk", "qcom,qcs615", "qcom,sm6150"; chassis-type = "embedded"; aliases { mmc1 = &sdhc_2; }; dp0-connector { compatible = "dp-connector"; label = "DP0"; type = "full-size"; hpd-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; port { dp0_connector_in: endpoint { remote-endpoint = <&mdss_dp0_out>; }; }; }; hdmi_connector: hdmi-out { compatible = "hdmi-connector"; type = "d"; port { hdmi_con_out: endpoint { remote-endpoint = <&adv7535_out>; }; }; }; vreg_v1p8_out: regulator-v1p8-out { compatible = "regulator-fixed"; regulator-name = "vreg-v1p8-out"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; vin-supply = <&vreg_v5p0_out>; regulator-boot-on; regulator-always-on; }; vreg_v3p3_out: regulator-v3p3-out { compatible = "regulator-fixed"; regulator-name = "vreg-v3p3-out"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; vin-supply = <&vreg_v5p0_out>; regulator-boot-on; regulator-always-on; }; vreg_v5p0_out: regulator-v5p0-out { compatible = "regulator-fixed"; regulator-name = "vreg-v5p0-out"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-boot-on; regulator-always-on; /* Powered by system 20V rail (USBC_VBUS_IN) */ }; }; &i2c1 { clock-frequency = <400000>; status = "okay"; hdmi_bridge: bridge@3d { compatible = "adi,adv7535"; reg = <0x3d>; avdd-supply = <&vreg_v1p8_out>; dvdd-supply = <&vreg_v1p8_out>; pvdd-supply = <&vreg_v1p8_out>; a2vdd-supply = <&vreg_v1p8_out>; v3p3-supply = <&vreg_v3p3_out>; interrupts-extended = <&tlmm 26 IRQ_TYPE_LEVEL_LOW>; adi,dsi-lanes = <4>; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; adv7535_in: endpoint { remote-endpoint = <&mdss_dsi0_out>; }; }; port@1 { reg = <1>; adv7535_out: endpoint { remote-endpoint = <&hdmi_con_out>; }; }; }; }; }; &mdss_dsi0_out { remote-endpoint = <&adv7535_in>; data-lanes = <0 1 2 3>; }; &pon_pwrkey { status = "okay"; }; &pon_resin { linux,code = ; status = "okay"; }; &sdhc_2 { pinctrl-0 = <&sdc2_state_on>; pinctrl-1 = <&sdc2_state_off>; pinctrl-names = "default", "sleep"; bus-width = <4>; cd-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>; vmmc-supply = <&vreg_l10a>; vqmmc-supply = <&vreg_s4a>; status = "okay"; };