// SPDX-License-Identifier: BSD-3-Clause

/dts-v1/;

#define PMIV0104_SID 7

#include <dt-bindings/leds/common.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>

#include "milos.dtsi"
#include "pm7550.dtsi"
#include "pm8550vs.dtsi"
#include "pmiv0104.dtsi" /* PMIV0102 */
#include "pmk8550.dtsi" /* PMK7635 */
#include "pmr735b.dtsi"

/ {
	model = "Nothing Phone (3a)";
	compatible = "nothing,asteroids", "qcom,milos";
	chassis-type = "handset";

	aliases {
		serial0 = &uart5;
	};

	chosen {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		stdout-path = "serial0:115200n8";

		framebuffer0: framebuffer@e3940000 {
			compatible = "simple-framebuffer";
			reg = <0x0 0xe3940000 0x0 (2392 * 1080 * 4)>;
			width = <1080>;
			height = <2392>;
			stride = <(1080 * 4)>;
			format = "a8r8g8b8";
			panel = <&panel>;
			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
			clocks = <&gcc GCC_DISP_HF_AXI_CLK>;

			/* Dummy panel for simple-framebuffer dimension info */
			panel: dummy-panel {
				compatible = "boe,bf068mwm-td0";
				height-mm = <157>;
				width-mm = <71>;
			};
		};
	};

	gpio-keys {
		compatible = "gpio-keys";

		pinctrl-0 = <&assist_default>, <&volume_up_default>;
		pinctrl-names = "default";

		key-assist {
			gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
			label = "Assistant";
			linux,code = <KEY_LEFTMETA>;
		};

		key-volume-up {
			gpios = <&pm7550_gpios 6 GPIO_ACTIVE_LOW>;
			label = "Volume Up";
			linux,code = <KEY_VOLUMEUP>;
		};
	};

	pmic-glink {
		compatible = "qcom,milos-pmic-glink",
			     "qcom,sm8550-pmic-glink",
			     "qcom,pmic-glink";
		#address-cells = <1>;
		#size-cells = <0>;
		orientation-gpios = <&tlmm 131 GPIO_ACTIVE_HIGH>;

		connector@0 {
			compatible = "usb-c-connector";
			reg = <0>;

			data-role = "dual";
			power-role = "dual";

			ports {
				#address-cells = <1>;
				#size-cells = <0>;

				port@0 {
					reg = <0>;

					pmic_glink_hs_in: endpoint {
						remote-endpoint = <&usb_1_dwc3_hs>;
					};
				};

				port@1 {
					reg = <1>;

					pmic_glink_sbu: endpoint {
						remote-endpoint = <&fsa4480_sbu_mux>;
					};
				};
			};
		};
	};

	vph_pwr: regulator-vph-pwr {
		compatible = "regulator-fixed";
		regulator-name = "vph_pwr";
		regulator-min-microvolt = <3700000>;
		regulator-max-microvolt = <3700000>;

		regulator-always-on;
		regulator-boot-on;
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		ramoops@81f20000 {
			compatible = "ramoops";
			reg = <0x0 0x81f20000 0x0 0x400000>;
			console-size = <0x200000>;
			mem-type = <2>;
			pmsg-size = <0x200000>;
		};

		/*
		 * ABL is powering down display and controller if this node is
		 * not named exactly "splash_region".
		 */
		splash_region@e3940000 {
			reg = <0x0 0xe3940000 0x0 0x2b00000>;
			no-map;
		};
	};
};

&apps_rsc {
	regulators-0 {
		compatible = "qcom,pm7550-rpmh-regulators";

		vdd-l1-supply = <&vreg_s1b>;
		vdd-l2-l3-supply = <&vreg_s3b>;
		vdd-l4-l5-supply = <&vreg_s2b>;
		vdd-l7-supply = <&vreg_s1b>;
		vdd-l8-supply = <&vreg_s1b>;
		vdd-l9-l10-supply = <&vreg_s1b>;
		vdd-l11-supply = <&vreg_s1b>;
		vdd-l12-l14-supply = <&vreg_bob>;
		vdd-l13-l16-supply = <&vreg_bob>;
		vdd-l15-l17-l18-l19-l20-l21-l22-l23-supply = <&vreg_bob>;
		vdd-s1-supply = <&vph_pwr>;
		vdd-s2-supply = <&vph_pwr>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s6-supply = <&vph_pwr>;
		vdd-bob-supply = <&vph_pwr>;

		qcom,pmic-id = "b";

		vreg_s1b: smps1 {
			regulator-name = "vreg_s1b";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <2080000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s2b: smps2 {
			regulator-name = "vreg_s2b";
			regulator-min-microvolt = <1256000>;
			regulator-max-microvolt = <1408000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s3b: smps3 {
			regulator-name = "vreg_s3b";
			regulator-min-microvolt = <880000>;
			regulator-max-microvolt = <1040000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s4b: smps4 {
			regulator-name = "vreg_s4b";
			regulator-min-microvolt = <300000>;
			regulator-max-microvolt = <1004000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l1b: ldo1 {
			regulator-name = "vreg_l1b";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2b: ldo2 {
			regulator-name = "vreg_l2b";
			regulator-min-microvolt = <880000>;
			regulator-max-microvolt = <912000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3b: ldo3 {
			regulator-name = "vreg_l3b";
			regulator-min-microvolt = <880000>;
			regulator-max-microvolt = <912000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4b: ldo4 {
			regulator-name = "vreg_l4b";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l5b: ldo5 {
			regulator-name = "vreg_l5b";
			regulator-min-microvolt = <1200000>;
			regulator-max-microvolt = <1200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7b: ldo7 {
			regulator-name = "vreg_l7b";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l8b: ldo8 {
			regulator-name = "vreg_l8b";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9b: ldo9 {
			regulator-name = "vreg_l9b";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l10b: ldo10 {
			regulator-name = "vreg_l10b";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l11b: ldo11 {
			regulator-name = "vreg_l11b";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l12b: ldo12 {
			regulator-name = "vreg_l12b";
			regulator-min-microvolt = <2952000>;
			regulator-max-microvolt = <2952000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l13b: ldo13 {
			regulator-name = "vreg_l13b";
			regulator-min-microvolt = <2700000>;
			regulator-max-microvolt = <3300000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l14b: ldo14 {
			regulator-name = "vreg_l14b";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l15b: ldo15 {
			regulator-name = "vreg_l15b";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3304000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l16b: ldo16 {
			regulator-name = "vreg_l16b";
			regulator-min-microvolt = <3008000>;
			regulator-max-microvolt = <3008000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l17b: ldo17 {
			regulator-name = "vreg_l17b";
			regulator-min-microvolt = <3104000>;
			regulator-max-microvolt = <3104000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l18b: ldo18 {
			regulator-name = "vreg_l18b";
			regulator-min-microvolt = <2800000>;
			regulator-max-microvolt = <2800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l19b: ldo19 {
			regulator-name = "vreg_l19b";
			regulator-min-microvolt = <3000000>;
			regulator-max-microvolt = <3000000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l20b: ldo20 {
			regulator-name = "vreg_l20b";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l21b: ldo21 {
			regulator-name = "vreg_l21b";
			regulator-min-microvolt = <1620000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l22b: ldo22 {
			regulator-name = "vreg_l22b";
			regulator-min-microvolt = <3200000>;
			regulator-max-microvolt = <3200000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l23b: ldo23 {
			regulator-name = "vreg_l23b";
			regulator-min-microvolt = <1650000>;
			regulator-max-microvolt = <3544000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_bob: bob {
			regulator-name = "vreg_bob";
			regulator-min-microvolt = <3008000>;
			regulator-max-microvolt = <3960000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-1 {
		compatible = "qcom,pm8550vs-rpmh-regulators";

		vdd-l1-supply = <&vreg_s3b>;
		vdd-l2-supply = <&vreg_s3b>;
		vdd-l3-supply = <&vreg_s3b>;
		vdd-s3-supply = <&vph_pwr>;
		vdd-s4-supply = <&vph_pwr>;
		vdd-s5-supply = <&vph_pwr>;
		vdd-s6-supply = <&vph_pwr>;

		qcom,pmic-id = "c";

		vreg_s3c: smps3 {
			regulator-name = "vreg_s3c";
			regulator-min-microvolt = <1010000>;
			regulator-max-microvolt = <1120000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s4c: smps4 {
			regulator-name = "vreg_s4c";
			regulator-min-microvolt = <352000>;
			regulator-max-microvolt = <812000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s5c: smps5 {
			regulator-name = "vreg_s5c";
			regulator-min-microvolt = <540000>;
			regulator-max-microvolt = <884000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_s6c: smps6 {
			regulator-name = "vreg_s6c";
			regulator-min-microvolt = <352000>;
			regulator-max-microvolt = <904000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l1c: ldo1 {
			regulator-name = "vreg_l1c";
			regulator-min-microvolt = <320000>;
			regulator-max-microvolt = <1004000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2c: ldo2 {
			regulator-name = "vreg_l2c";
			regulator-min-microvolt = <320000>;
			regulator-max-microvolt = <650000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3c: ldo3 {
			regulator-name = "vreg_l3c";
			regulator-min-microvolt = <320000>;
			regulator-max-microvolt = <912000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};

	regulators-2 {
		compatible = "qcom,pmr735b-rpmh-regulators";

		vdd-l1-l2-supply = <&vreg_s3b>;
		vdd-l3-supply = <&vreg_s3b>;
		vdd-l4-supply = <&vreg_s1b>;
		vdd-l5-supply = <&vreg_s2b>;
		vdd-l7-l8-supply = <&vreg_s2b>;
		vdd-l9-supply = <&vreg_s3b>;
		vdd-l10-supply = <&vreg_s1b>;
		vdd-l11-supply = <&vreg_s3b>;
		vdd-l12-supply = <&vreg_s3b>;

		qcom,pmic-id = "f";

		vreg_l1f: ldo1 {
			regulator-name = "vreg_l1f";
			regulator-min-microvolt = <852000>;
			regulator-max-microvolt = <950000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l2f: ldo2 {
			regulator-name = "vreg_l2f";
			regulator-min-microvolt = <751000>;
			regulator-max-microvolt = <824000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l3f: ldo3 {
			regulator-name = "vreg_l3f";
			regulator-min-microvolt = <650000>;
			regulator-max-microvolt = <880000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l4f: ldo4 {
			regulator-name = "vreg_l4f";
			regulator-min-microvolt = <1700000>;
			regulator-max-microvolt = <1950000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l5f: ldo5 {
			regulator-name = "vreg_l5f";
			regulator-min-microvolt = <1140000>;
			regulator-max-microvolt = <1260000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l7f: ldo7 {
			regulator-name = "vreg_l7f";
			regulator-min-microvolt = <1080000>;
			regulator-max-microvolt = <1350000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l9f: ldo9 {
			regulator-name = "vreg_l9f";
			regulator-min-microvolt = <870000>;
			regulator-max-microvolt = <970000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l10f: ldo10 {
			regulator-name = "vreg_l10f";
			regulator-min-microvolt = <1500000>;
			regulator-max-microvolt = <1800000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l11f: ldo11 {
			regulator-name = "vreg_l11f";
			regulator-min-microvolt = <320000>;
			regulator-max-microvolt = <864000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};

		vreg_l12f: ldo12 {
			regulator-name = "vreg_l12f";
			regulator-min-microvolt = <480000>;
			regulator-max-microvolt = <884000>;
			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
		};
	};
};

&dispcc {
	/* Disable for now so simple-framebuffer continues working */
	status = "disabled";
};

&gcc {
	protected-clocks = <GCC_PCIE_1_AUX_CLK>, <GCC_PCIE_1_AUX_CLK_SRC>,
			   <GCC_PCIE_1_CFG_AHB_CLK>, <GCC_PCIE_1_MSTR_AXI_CLK>,
			   <GCC_PCIE_1_PHY_RCHNG_CLK>, <GCC_PCIE_1_PHY_RCHNG_CLK_SRC>,
			   <GCC_PCIE_1_PIPE_CLK>, <GCC_PCIE_1_PIPE_CLK_SRC>,
			   <GCC_PCIE_1_PIPE_DIV2_CLK>, <GCC_PCIE_1_PIPE_DIV2_CLK_SRC>,
			   <GCC_PCIE_1_SLV_AXI_CLK>, <GCC_PCIE_1_SLV_Q2A_AXI_CLK>;
};

&i2c7 {
	clock-frequency = <400000>;

	status = "okay";

	led-controller@3a {
		compatible = "awinic,aw20036";
		reg = <0x3a>;
		#address-cells = <1>;
		#size-cells = <0>;

		enable-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;

		led@0 {
			reg = <0x0>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <0>;
			led-max-microamp = <6560>;
		};

		led@1 {
			reg = <0x1>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <1>;
			led-max-microamp = <6560>;
		};

		led@2 {
			reg = <0x2>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <2>;
			led-max-microamp = <6560>;
		};

		led@3 {
			reg = <0x3>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <3>;
			led-max-microamp = <6560>;
		};

		led@4 {
			reg = <0x4>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <4>;
			led-max-microamp = <6560>;
		};

		led@5 {
			reg = <0x5>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <5>;
			led-max-microamp = <6560>;
		};

		led@6 {
			reg = <0x6>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <6>;
			led-max-microamp = <6560>;
		};

		led@7 {
			reg = <0x7>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-2";
			function-enumerator = <0>;
			led-max-microamp = <6560>;
		};

		led@8 {
			reg = <0x8>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-3";
			function-enumerator = <0>;
			led-max-microamp = <6560>;
		};

		led@9 {
			reg = <0x9>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-3";
			function-enumerator = <1>;
			led-max-microamp = <6560>;
		};

		led@a {
			reg = <0xa>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-3";
			function-enumerator = <2>;
			led-max-microamp = <6560>;
		};

		led@b {
			reg = <0xb>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-3";
			function-enumerator = <3>;
			led-max-microamp = <6560>;
		};

		led@c {
			reg = <0xc>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <7>;
			led-max-microamp = <6560>;
		};

		led@d {
			reg = <0xd>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <8>;
			led-max-microamp = <6560>;
		};

		led@e {
			reg = <0xe>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <9>;
			led-max-microamp = <6560>;
		};

		led@f {
			reg = <0xf>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <10>;
			led-max-microamp = <6560>;
		};

		led@10 {
			reg = <0x10>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <11>;
			led-max-microamp = <6560>;
		};

		led@11 {
			reg = <0x11>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <12>;
			led-max-microamp = <6560>;
		};

		led@12 {
			reg = <0x12>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <13>;
			led-max-microamp = <6560>;
		};

		led@13 {
			reg = <0x13>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-2";
			function-enumerator = <1>;
			led-max-microamp = <6560>;
		};

		led@14 {
			reg = <0x14>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-2";
			function-enumerator = <2>;
			led-max-microamp = <6560>;
		};

		led@15 {
			reg = <0x15>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-3";
			function-enumerator = <4>;
			led-max-microamp = <6560>;
		};

		led@16 {
			reg = <0x16>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-3";
			function-enumerator = <5>;
			led-max-microamp = <6560>;
		};

		led@17 {
			reg = <0x17>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-3";
			function-enumerator = <6>;
			led-max-microamp = <6560>;
		};

		led@18 {
			reg = <0x18>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <14>;
			led-max-microamp = <6560>;
		};

		led@19 {
			reg = <0x19>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <15>;
			led-max-microamp = <6560>;
		};

		led@1a {
			reg = <0x1a>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <16>;
			led-max-microamp = <6560>;
		};

		led@1b {
			reg = <0x1b>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <17>;
			led-max-microamp = <6560>;
		};

		led@1c {
			reg = <0x1c>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <18>;
			led-max-microamp = <6560>;
		};

		led@1d {
			reg = <0x1d>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-1";
			function-enumerator = <19>;
			led-max-microamp = <6560>;
		};

		led@1e {
			reg = <0x1e>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-2";
			function-enumerator = <3>;
			led-max-microamp = <6560>;
		};

		led@1f {
			reg = <0x1f>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-2";
			function-enumerator = <4>;
			led-max-microamp = <6560>;
		};

		led@20 {
			reg = <0x20>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-3";
			function-enumerator = <7>;
			led-max-microamp = <6560>;
		};

		led@21 {
			reg = <0x21>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-3";
			function-enumerator = <8>;
			led-max-microamp = <6560>;
		};

		led@22 {
			reg = <0x22>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-3";
			function-enumerator = <9>;
			led-max-microamp = <6560>;
		};

		led@23 {
			reg = <0x23>;
			color = <LED_COLOR_ID_WHITE>;
			function = "glyph-3";
			function-enumerator = <10>;
			led-max-microamp = <6560>;
		};
	};

	typec-mux@42 {
		compatible = "fcs,fsa4480";
		reg = <0x42>;

		vcc-supply = <&vph_pwr>;

		mode-switch;
		orientation-switch;

		port {
			fsa4480_sbu_mux: endpoint {
				remote-endpoint = <&pmic_glink_sbu>;
			};
		};
	};
};

&pm7550_flash {
	status = "okay";

	led-0 {
		function = LED_FUNCTION_FLASH;
		color = <LED_COLOR_ID_WHITE>;
		led-sources = <1>, <4>;
		led-max-microamp = <350000>;
		flash-max-microamp = <1500000>;
		flash-max-timeout-us = <400000>;
	};
};

&pm7550_gpios {
	volume_up_default: volume-up-default-state {
		pins = "gpio6";
		function = PMIC_GPIO_FUNC_NORMAL;
		power-source = <1>;
		bias-pull-up;
	};
};

&pm8550vs_c {
	status = "okay";
};

&pmiv0104_eusb2_repeater {
	vdd18-supply = <&vreg_l7b>;
	vdd3-supply = <&vreg_l17b>;

	qcom,tune-res-fsdif = /bits/ 8 <0x5>;
	qcom,tune-usb2-amplitude = /bits/ 8 <0x8>;
	qcom,tune-usb2-disc-thres = /bits/ 8 <0x7>;
	qcom,tune-usb2-preem = /bits/ 8 <0x6>;
};

&pon_pwrkey {
	status = "okay";
};

&pon_resin {
	linux,code = <KEY_VOLUMEDOWN>;

	status = "okay";
};

&qupv3_id_0 {
	status = "okay";
};

&qupv3_id_1 {
	status = "okay";
};

&remoteproc_adsp {
	firmware-name = "qcom/milos/nothing/asteroids/adsp.mbn",
			"qcom/milos/nothing/asteroids/adsp_dtb.mbn";

	status = "okay";
};

&remoteproc_cdsp {
	firmware-name = "qcom/milos/nothing/asteroids/cdsp.mbn",
			"qcom/milos/nothing/asteroids/cdsp_dtb.mbn";

	status = "okay";
};

&remoteproc_mpss {
	firmware-name = "qcom/milos/nothing/asteroids/modem.mbn";

	status = "okay";
};

&remoteproc_wpss {
	firmware-name = "qcom/milos/nothing/asteroids/wpss.mbn";

	status = "okay";
};

&tlmm {
	gpio-reserved-ranges = <13 1>, /* Display */
			       <63 2>; /* WLAN UART */

	assist_default: assist-default-state {
		pins = "gpio71";
		function = "gpio";
		bias-pull-up;
	};
};

&trusted_apps_mem {
	reg = <0x0 0xe9500000 0x0 0x5500000>;
};

/*
 * UART_RX and UART_TX are routed to test points on board, not
 * available over USB.
 */
&uart5 {
	status = "okay";
};

&usb_1 {
	/* USB 2.0 only, HW does not support USB 3.x */
	qcom,select-utmi-as-pipe-clk;

	status = "okay";
};

&usb_1_dwc3_hs {
	remote-endpoint = <&pmic_glink_hs_in>;
};

&usb_1_hsphy {
	vdd-supply = <&vreg_l2b>;
	vdda12-supply = <&vreg_l4b>;

	phys = <&pmiv0104_eusb2_repeater>;

	status = "okay";
};