From 6e7333d315a768170a59ac771297ee0551bdddbf Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Mon, 1 Feb 2016 18:51:05 -0500 Subject: net: add rx_nohandler stat counter This adds an rx_nohandler stat counter, along with a sysfs statistics node, and copies the counter out via netlink as well. CC: "David S. Miller" CC: Eric Dumazet CC: Jiri Pirko CC: Daniel Borkmann CC: Tom Herbert CC: Jay Vosburgh CC: Veaceslav Falico CC: Andy Gospodarek CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson Signed-off-by: David S. Miller --- include/uapi/linux/if_link.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index a30b78090594..d3e90b91e07e 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -35,6 +35,8 @@ struct rtnl_link_stats { /* for cslip etc */ __u32 rx_compressed; __u32 tx_compressed; + + __u32 rx_nohandler; /* dropped, no handler found */ }; /* The main device statistics structure */ @@ -68,6 +70,8 @@ struct rtnl_link_stats64 { /* for cslip etc */ __u64 rx_compressed; __u64 tx_compressed; + + __u64 rx_nohandler; /* dropped, no handler found */ }; /* The struct should be in sync with struct ifmap */ -- cgit v1.2.3 From 824bd0ce6c7c43a9e1e210abf124958e54d88342 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Mon, 1 Feb 2016 22:39:53 -0800 Subject: bpf: introduce BPF_MAP_TYPE_PERCPU_HASH map Introduce BPF_MAP_TYPE_PERCPU_HASH map type which is used to do accurate counters without need to use BPF_XADD instruction which turned out to be too costly for high-performance network monitoring. In the typical use case the 'key' is the flow tuple or other long living object that sees a lot of events per second. bpf_map_lookup_elem() returns per-cpu area. Example: struct { u32 packets; u32 bytes; } * ptr = bpf_map_lookup_elem(&map, &key); /* ptr points to this_cpu area of the value, so the following * increments will not collide with other cpus */ ptr->packets ++; ptr->bytes += skb->len; bpf_update_elem() atomically creates a new element where all per-cpu values are zero initialized and this_cpu value is populated with given 'value'. Note that non-per-cpu hash map always allocates new element and then deletes old after rcu grace period to maintain atomicity of update. Per-cpu hash map updates element values in-place. Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/uapi/linux/bpf.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index aa6f8571de13..43ae40c8763e 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -81,6 +81,7 @@ enum bpf_map_type { BPF_MAP_TYPE_ARRAY, BPF_MAP_TYPE_PROG_ARRAY, BPF_MAP_TYPE_PERF_EVENT_ARRAY, + BPF_MAP_TYPE_PERCPU_HASH, }; enum bpf_prog_type { -- cgit v1.2.3 From a10423b87a7eae75da79ce80a8d9475047a674ee Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Mon, 1 Feb 2016 22:39:54 -0800 Subject: bpf: introduce BPF_MAP_TYPE_PERCPU_ARRAY map Primary use case is a histogram array of latency where bpf program computes the latency of block requests or other events and stores histogram of latency into array of 64 elements. All cpus are constantly running, so normal increment is not accurate, bpf_xadd causes cache ping-pong and this per-cpu approach allows fastest collision-free counters. Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/uapi/linux/bpf.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 43ae40c8763e..2ee0fde1bf96 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -82,6 +82,7 @@ enum bpf_map_type { BPF_MAP_TYPE_PROG_ARRAY, BPF_MAP_TYPE_PERF_EVENT_ARRAY, BPF_MAP_TYPE_PERCPU_HASH, + BPF_MAP_TYPE_PERCPU_ARRAY, }; enum bpf_prog_type { -- cgit v1.2.3 From 67eb03318bc5fe170ae832423fda7a23b0d801cf Mon Sep 17 00:00:00 2001 From: David Ahern Date: Tue, 2 Feb 2016 07:43:45 -0800 Subject: net: Add support for fill_slave_info to VRF device Allows userspace to have direct access to VRF table association versus looking up master device and its table. Signed-off-by: David Ahern Signed-off-by: David S. Miller --- include/uapi/linux/if_link.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index d3e90b91e07e..d452cea59020 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -405,6 +405,14 @@ enum { #define IFLA_VRF_MAX (__IFLA_VRF_MAX - 1) +enum { + IFLA_VRF_PORT_UNSPEC, + IFLA_VRF_PORT_TABLE, + __IFLA_VRF_PORT_MAX +}; + +#define IFLA_VRF_PORT_MAX (__IFLA_VRF_PORT_MAX - 1) + /* IPVLAN section */ enum { IFLA_IPVLAN_UNSPEC, -- cgit v1.2.3 From 103a8ad1fa3b261c78dfc842cb315defe9d40be0 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Wed, 3 Feb 2016 04:04:36 +0100 Subject: ethtool: add speed/duplex validation functions Add functions which check if the speed/duplex are defined. Signed-off-by: Nikolay Aleksandrov Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 57fa39005e79..b2e180181629 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1319,11 +1319,45 @@ enum ethtool_sfeatures_retval_bits { #define SPEED_UNKNOWN -1 +static inline int ethtool_validate_speed(__u32 speed) +{ + switch (speed) { + case SPEED_10: + case SPEED_100: + case SPEED_1000: + case SPEED_2500: + case SPEED_5000: + case SPEED_10000: + case SPEED_20000: + case SPEED_25000: + case SPEED_40000: + case SPEED_50000: + case SPEED_56000: + case SPEED_100000: + case SPEED_UNKNOWN: + return 1; + } + + return 0; +} + /* Duplex, half or full. */ #define DUPLEX_HALF 0x00 #define DUPLEX_FULL 0x01 #define DUPLEX_UNKNOWN 0xff +static inline int ethtool_validate_duplex(__u8 duplex) +{ + switch (duplex) { + case DUPLEX_HALF: + case DUPLEX_FULL: + case DUPLEX_UNKNOWN: + return 1; + } + + return 0; +} + /* Which connector port. */ #define PORT_TP 0x00 #define PORT_AUI 0x01 -- cgit v1.2.3 From 157ede6784ba2837c7dc43f195418c75927f8488 Mon Sep 17 00:00:00 2001 From: Elad Raz Date: Wed, 3 Feb 2016 09:57:04 +0100 Subject: bridge: mdb: add support for offloaded mdb entries Add new bitmask member 'flags' to br_mdb_entry structure. Adding MDB_FLAGS_OFFLOAD bit which indicates MDB entries is offloaded to hardware. Signed-off-by: Elad Raz Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/uapi/linux/if_bridge.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index 18db14477bdd..ec3547234998 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -183,6 +183,8 @@ struct br_mdb_entry { #define MDB_TEMPORARY 0 #define MDB_PERMANENT 1 __u8 state; +#define MDB_FLAGS_OFFLOAD (1 << 0) + __u8 flags; __u16 vid; struct { union { -- cgit v1.2.3 From 12b74dfadb5a7a23baf4db941dc9fd9d371f249a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 4 Feb 2016 13:31:17 +0100 Subject: ipv4: add option to drop unicast encapsulated in L2 multicast In order to solve a problem with 802.11, the so-called hole-196 attack, add an option (sysctl) called "drop_unicast_in_l2_multicast" which, if enabled, causes the stack to drop IPv4 unicast packets encapsulated in link-layer multi- or broadcast frames. Such frames can (as an attack) be created by any member of the same wireless network and transmitted as valid encrypted frames since the symmetric key for broadcast frames is shared between all stations. Additionally, enabling this option provides compliance with a SHOULD clause of RFC 1122. Reviewed-by: Julian Anastasov Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/uapi/linux/ip.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ip.h b/include/uapi/linux/ip.h index 08f894d2ddbd..584834f7e95c 100644 --- a/include/uapi/linux/ip.h +++ b/include/uapi/linux/ip.h @@ -165,6 +165,7 @@ enum IPV4_DEVCONF_IGMPV2_UNSOLICITED_REPORT_INTERVAL, IPV4_DEVCONF_IGMPV3_UNSOLICITED_REPORT_INTERVAL, IPV4_DEVCONF_IGNORE_ROUTES_WITH_LINKDOWN, + IPV4_DEVCONF_DROP_UNICAST_IN_L2_MULTICAST, __IPV4_DEVCONF_MAX }; -- cgit v1.2.3 From 97daf331455077645ae1f13438bebd3d1a2e94ee Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 4 Feb 2016 13:31:18 +0100 Subject: ipv4: add option to drop gratuitous ARP packets In certain 802.11 wireless deployments, there will be ARP proxies that use knowledge of the network to correctly answer requests. To prevent gratuitous ARP frames on the shared medium from being a problem, on such deployments wireless needs to drop them. Enable this by providing an option called "drop_gratuitous_arp". Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/uapi/linux/ip.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ip.h b/include/uapi/linux/ip.h index 584834f7e95c..f291569768dd 100644 --- a/include/uapi/linux/ip.h +++ b/include/uapi/linux/ip.h @@ -166,6 +166,7 @@ enum IPV4_DEVCONF_IGMPV3_UNSOLICITED_REPORT_INTERVAL, IPV4_DEVCONF_IGNORE_ROUTES_WITH_LINKDOWN, IPV4_DEVCONF_DROP_UNICAST_IN_L2_MULTICAST, + IPV4_DEVCONF_DROP_GRATUITOUS_ARP, __IPV4_DEVCONF_MAX }; -- cgit v1.2.3 From abbc30436d39dfed8ebfca338d253f211ac7b094 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 4 Feb 2016 13:31:19 +0100 Subject: ipv6: add option to drop unicast encapsulated in L2 multicast In order to solve a problem with 802.11, the so-called hole-196 attack, add an option (sysctl) called "drop_unicast_in_l2_multicast" which, if enabled, causes the stack to drop IPv6 unicast packets encapsulated in link-layer multi- or broadcast frames. Such frames can (as an attack) be created by any member of the same wireless network and transmitted as valid encrypted frames since the symmetric key for broadcast frames is shared between all stations. Reviewed-by: Julian Anastasov Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/uapi/linux/ipv6.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index 38b4fef20219..4c413570efe8 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -174,6 +174,7 @@ enum { DEVCONF_USE_OIF_ADDRS_ONLY, DEVCONF_ACCEPT_RA_MIN_HOP_LIMIT, DEVCONF_IGNORE_ROUTES_WITH_LINKDOWN, + DEVCONF_DROP_UNICAST_IN_L2_MULTICAST, DEVCONF_MAX }; -- cgit v1.2.3 From 7a02bf892d8f1e5298af1676f001bee410509d80 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 4 Feb 2016 13:31:20 +0100 Subject: ipv6: add option to drop unsolicited neighbor advertisements In certain 802.11 wireless deployments, there will be NA proxies that use knowledge of the network to correctly answer requests. To prevent unsolicitd advertisements on the shared medium from being a problem, on such deployments wireless needs to drop them. Enable this by providing an option called "drop_unsolicited_na". Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/uapi/linux/ipv6.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index 4c413570efe8..ec117b65d5a5 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -175,6 +175,7 @@ enum { DEVCONF_ACCEPT_RA_MIN_HOP_LIMIT, DEVCONF_IGNORE_ROUTES_WITH_LINKDOWN, DEVCONF_DROP_UNICAST_IN_L2_MULTICAST, + DEVCONF_DROP_UNSOLICITED_NA, DEVCONF_MAX }; -- cgit v1.2.3 From 72bb68721f80a1441e871b6afc9ab0b3793d5031 Mon Sep 17 00:00:00 2001 From: Edward Cree Date: Fri, 5 Feb 2016 11:16:21 +0000 Subject: ethtool: add IPv6 to the NFC API Signed-off-by: Edward Cree Reviewed-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 70 ++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 64 insertions(+), 6 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index b2e180181629..5e0940dcbfe8 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -748,6 +748,56 @@ struct ethtool_usrip4_spec { __u8 proto; }; +/** + * struct ethtool_tcpip6_spec - flow specification for TCP/IPv6 etc. + * @ip6src: Source host + * @ip6dst: Destination host + * @psrc: Source port + * @pdst: Destination port + * @tclass: Traffic Class + * + * This can be used to specify a TCP/IPv6, UDP/IPv6 or SCTP/IPv6 flow. + */ +struct ethtool_tcpip6_spec { + __be32 ip6src[4]; + __be32 ip6dst[4]; + __be16 psrc; + __be16 pdst; + __u8 tclass; +}; + +/** + * struct ethtool_ah_espip6_spec - flow specification for IPsec/IPv6 + * @ip6src: Source host + * @ip6dst: Destination host + * @spi: Security parameters index + * @tclass: Traffic Class + * + * This can be used to specify an IPsec transport or tunnel over IPv6. + */ +struct ethtool_ah_espip6_spec { + __be32 ip6src[4]; + __be32 ip6dst[4]; + __be32 spi; + __u8 tclass; +}; + +/** + * struct ethtool_usrip6_spec - general flow specification for IPv6 + * @ip6src: Source host + * @ip6dst: Destination host + * @l4_4_bytes: First 4 bytes of transport (layer 4) header + * @tclass: Traffic Class + * @l4_proto: Transport protocol number (nexthdr after any Extension Headers) + */ +struct ethtool_usrip6_spec { + __be32 ip6src[4]; + __be32 ip6dst[4]; + __be32 l4_4_bytes; + __u8 tclass; + __u8 l4_proto; +}; + union ethtool_flow_union { struct ethtool_tcpip4_spec tcp_ip4_spec; struct ethtool_tcpip4_spec udp_ip4_spec; @@ -755,6 +805,12 @@ union ethtool_flow_union { struct ethtool_ah_espip4_spec ah_ip4_spec; struct ethtool_ah_espip4_spec esp_ip4_spec; struct ethtool_usrip4_spec usr_ip4_spec; + struct ethtool_tcpip6_spec tcp_ip6_spec; + struct ethtool_tcpip6_spec udp_ip6_spec; + struct ethtool_tcpip6_spec sctp_ip6_spec; + struct ethtool_ah_espip6_spec ah_ip6_spec; + struct ethtool_ah_espip6_spec esp_ip6_spec; + struct ethtool_usrip6_spec usr_ip6_spec; struct ethhdr ether_spec; __u8 hdata[52]; }; @@ -1401,15 +1457,17 @@ static inline int ethtool_validate_duplex(__u8 duplex) #define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */ #define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */ #define AH_ESP_V4_FLOW 0x04 /* hash only */ -#define TCP_V6_FLOW 0x05 /* hash only */ -#define UDP_V6_FLOW 0x06 /* hash only */ -#define SCTP_V6_FLOW 0x07 /* hash only */ +#define TCP_V6_FLOW 0x05 /* hash or spec (tcp_ip6_spec; nfc only) */ +#define UDP_V6_FLOW 0x06 /* hash or spec (udp_ip6_spec; nfc only) */ +#define SCTP_V6_FLOW 0x07 /* hash or spec (sctp_ip6_spec; nfc only) */ #define AH_ESP_V6_FLOW 0x08 /* hash only */ #define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */ #define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */ -#define AH_V6_FLOW 0x0b /* hash only */ -#define ESP_V6_FLOW 0x0c /* hash only */ -#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */ +#define AH_V6_FLOW 0x0b /* hash or spec (ah_ip6_spec; nfc only) */ +#define ESP_V6_FLOW 0x0c /* hash or spec (esp_ip6_spec; nfc only) */ +#define IPV4_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */ +#define IP_USER_FLOW IPV4_USER_FLOW +#define IPV6_USER_FLOW 0x0e /* spec only (usr_ip6_spec; nfc only) */ #define IPV4_FLOW 0x10 /* hash only */ #define IPV6_FLOW 0x11 /* hash only */ #define ETHER_FLOW 0x12 /* spec only (ether_spec) */ -- cgit v1.2.3 From 4456ed04ea44b800d691b18c14a68ec9894d2aca Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sun, 7 Feb 2016 23:27:55 +0200 Subject: ethtool: future-proof interface for speed extensions Many virtual and not quite virtual devices allow any speed to be set through ethtool. In particular, this applies to the virtio-net devices. Document this fact to make sure people don't assume the enum lists all possible values. Reserve values greater than INT_MAX for future extension and to avoid conflict with SPEED_UNKNOWN. Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 5e0940dcbfe8..4345f80a2e33 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -31,7 +31,7 @@ * physical connectors and other link features that are * advertised through autonegotiation or enabled for * auto-detection. - * @speed: Low bits of the speed + * @speed: Low bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN * @duplex: Duplex mode; one of %DUPLEX_* * @port: Physical connector type; one of %PORT_* * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not @@ -47,7 +47,7 @@ * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. * @maxrxpkt: Historically used to report RX IRQ coalescing; now * obsoleted by &struct ethtool_coalesce. Read-only; deprecated. - * @speed_hi: High bits of the speed + * @speed_hi: High bits of the speed, 1Mb units, 0 to INT_MAX or SPEED_UNKNOWN * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of * %ETH_TP_MDI_*. If the status is unknown or not applicable, the * value will be %ETH_TP_MDI_INVALID. Read-only. @@ -1359,7 +1359,7 @@ enum ethtool_sfeatures_retval_bits { * it was forced up into this mode or autonegotiated. */ -/* The forced speed, 10Mb, 100Mb, gigabit, [2.5|5|10|20|25|40|50|56|100]GbE. */ +/* The forced speed, in units of 1Mb. All values 0 to INT_MAX are legal. */ #define SPEED_10 10 #define SPEED_100 100 #define SPEED_1000 1000 -- cgit v1.2.3 From 4a92602aa1cd5bbaeedbd9536ff992f7d26fe9d1 Mon Sep 17 00:00:00 2001 From: Tycho Andersen Date: Fri, 5 Feb 2016 09:20:52 -0700 Subject: openvswitch: allow management from inside user namespaces Operations with the GENL_ADMIN_PERM flag fail permissions checks because this flag means we call netlink_capable, which uses the init user ns. Instead, let's introduce a new flag, GENL_UNS_ADMIN_PERM for operations which should be allowed inside a user namespace. The motivation for this is to be able to run openvswitch in unprivileged containers. I've tested this and it seems to work, but I really have no idea about the security consequences of this patch, so thoughts would be much appreciated. v2: use the GENL_UNS_ADMIN_PERM flag instead of a check in each function v3: use separate ifs for UNS_ADMIN_PERM and ADMIN_PERM, instead of one massive one Reported-by: James Page Signed-off-by: Tycho Andersen CC: Eric Biederman CC: Pravin Shelar CC: Justin Pettit CC: "David S. Miller" Acked-by: Pravin B Shelar Signed-off-by: David S. Miller --- include/uapi/linux/genetlink.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/genetlink.h b/include/uapi/linux/genetlink.h index c3363ba1ae05..5512c90af7e3 100644 --- a/include/uapi/linux/genetlink.h +++ b/include/uapi/linux/genetlink.h @@ -21,6 +21,7 @@ struct genlmsghdr { #define GENL_CMD_CAP_DO 0x02 #define GENL_CMD_CAP_DUMP 0x04 #define GENL_CMD_CAP_HASPOL 0x08 +#define GENL_UNS_ADMIN_PERM 0x10 /* * List of reserved static generic netlink identifiers: -- cgit v1.2.3 From e02564ee334a7ae46b71fc18576391cb9455433e Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Sun, 7 Feb 2016 21:52:23 +0100 Subject: ethtool: make validate_speed accept all speeds between 0 and INT_MAX Devices these days can have any speed and as was recently pointed out any speed from 0 to INT_MAX is valid so adjust speed validation to accept such values. Signed-off-by: Nikolay Aleksandrov Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 19 +------------------ 1 file changed, 1 insertion(+), 18 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 4345f80a2e33..190aea0faaf4 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1377,24 +1377,7 @@ enum ethtool_sfeatures_retval_bits { static inline int ethtool_validate_speed(__u32 speed) { - switch (speed) { - case SPEED_10: - case SPEED_100: - case SPEED_1000: - case SPEED_2500: - case SPEED_5000: - case SPEED_10000: - case SPEED_20000: - case SPEED_25000: - case SPEED_40000: - case SPEED_50000: - case SPEED_56000: - case SPEED_100000: - case SPEED_UNKNOWN: - return 1; - } - - return 0; + return speed <= INT_MAX || speed == SPEED_UNKNOWN; } /* Duplex, half or full. */ -- cgit v1.2.3 From cd9b266095f422267bddbec88f9098b48ea548fc Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 11 Feb 2016 22:02:53 -0800 Subject: tcp: add tcpi_min_rtt and tcpi_notsent_bytes to tcp_info tcpi_min_rtt reports the minimal rtt observed by TCP stack for the flow, in usec unit. Might be ~0U if not yet known. tcpi_notsent_bytes reports the amount of bytes in the write queue that were not yet sent. This is done in a single patch to not add a temporary 32bit padding hole in tcp_info. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/uapi/linux/tcp.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/tcp.h b/include/uapi/linux/tcp.h index 65a77b071e22..fe95446e9abf 100644 --- a/include/uapi/linux/tcp.h +++ b/include/uapi/linux/tcp.h @@ -196,6 +196,9 @@ struct tcp_info { __u64 tcpi_bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived */ __u32 tcpi_segs_out; /* RFC4898 tcpEStatsPerfSegsOut */ __u32 tcpi_segs_in; /* RFC4898 tcpEStatsPerfSegsIn */ + + __u32 tcpi_notsent_bytes; + __u32 tcpi_min_rtt; }; /* for TCP_MD5SIG socket option */ -- cgit v1.2.3 From d1b4c689d4130bcfd3532680b64db562300716b6 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 18 Feb 2016 15:03:24 +0100 Subject: netlink: remove mmapped netlink support mmapped netlink has a number of unresolved issues: - TX zerocopy support had to be disabled more than a year ago via commit 4682a0358639b29cf ("netlink: Always copy on mmap TX.") because the content of the mmapped area can change after netlink attribute validation but before message processing. - RX support was implemented mainly to speed up nfqueue dumping packet payload to userspace. However, since commit ae08ce0021087a5d812d2 ("netfilter: nfnetlink_queue: zero copy support") we avoid one copy with the socket-based interface too (via the skb_zerocopy helper). The other problem is that skbs attached to mmaped netlink socket behave different from normal skbs: - they don't have a shinfo area, so all functions that use skb_shinfo() (e.g. skb_clone) cannot be used. - reserving headroom prevents userspace from seeing the content as it expects message to start at skb->head. See for instance commit aa3a022094fa ("netlink: not trim skb for mmaped socket when dump"). - skbs handed e.g. to netlink_ack must have non-NULL skb->sk, else we crash because it needs the sk to check if a tx ring is attached. Also not obvious, leads to non-intuitive bug fixes such as 7c7bdf359 ("netfilter: nfnetlink: use original skbuff when acking batches"). mmaped netlink also didn't play nicely with the skb_zerocopy helper used by nfqueue and openvswitch. Daniel Borkmann fixed this via commit 6bb0fef489f6 ("netlink, mmap: fix edge-case leakages in nf queue zero-copy")' but at the cost of also needing to provide remaining length to the allocation function. nfqueue also has problems when used with mmaped rx netlink: - mmaped netlink doesn't allow use of nfqueue batch verdict messages. Problem is that in the mmap case, the allocation time also determines the ordering in which the frame will be seen by userspace (A allocating before B means that A is located in earlier ring slot, but this also means that B might get a lower sequence number then A since seqno is decided later. To fix this we would need to extend the spinlocked region to also cover the allocation and message setup which isn't desirable. - nfqueue can now be configured to queue large (GSO) skbs to userspace. Queing GSO packets is faster than having to force a software segmentation in the kernel, so this is a desirable option. However, with a mmap based ring one has to use 64kb per ring slot element, else mmap has to fall back to the socket path (NL_MMAP_STATUS_COPY) for all large packets. To use the mmap interface, userspace not only has to probe for mmap netlink support, it also has to implement a recv/socket receive path in order to handle messages that exceed the size of an rx ring element. Cc: Daniel Borkmann Cc: Ken-ichirou MATSUZAWA Cc: Pablo Neira Ayuso Cc: Patrick McHardy Cc: Thomas Graf Signed-off-by: Florian Westphal Signed-off-by: David S. Miller --- include/uapi/linux/netlink.h | 4 ++++ include/uapi/linux/netlink_diag.h | 2 ++ 2 files changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h index f095155d8749..0dba4e4ed2be 100644 --- a/include/uapi/linux/netlink.h +++ b/include/uapi/linux/netlink.h @@ -107,8 +107,10 @@ struct nlmsgerr { #define NETLINK_PKTINFO 3 #define NETLINK_BROADCAST_ERROR 4 #define NETLINK_NO_ENOBUFS 5 +#ifndef __KERNEL__ #define NETLINK_RX_RING 6 #define NETLINK_TX_RING 7 +#endif #define NETLINK_LISTEN_ALL_NSID 8 #define NETLINK_LIST_MEMBERSHIPS 9 #define NETLINK_CAP_ACK 10 @@ -134,6 +136,7 @@ struct nl_mmap_hdr { __u32 nm_gid; }; +#ifndef __KERNEL__ enum nl_mmap_status { NL_MMAP_STATUS_UNUSED, NL_MMAP_STATUS_RESERVED, @@ -145,6 +148,7 @@ enum nl_mmap_status { #define NL_MMAP_MSG_ALIGNMENT NLMSG_ALIGNTO #define NL_MMAP_MSG_ALIGN(sz) __ALIGN_KERNEL(sz, NL_MMAP_MSG_ALIGNMENT) #define NL_MMAP_HDRLEN NL_MMAP_MSG_ALIGN(sizeof(struct nl_mmap_hdr)) +#endif #define NET_MAJOR 36 /* Major 36 is reserved for networking */ diff --git a/include/uapi/linux/netlink_diag.h b/include/uapi/linux/netlink_diag.h index f2159d30d1f5..d79399394b46 100644 --- a/include/uapi/linux/netlink_diag.h +++ b/include/uapi/linux/netlink_diag.h @@ -48,6 +48,8 @@ enum { #define NDIAG_SHOW_MEMINFO 0x00000001 /* show memory info of a socket */ #define NDIAG_SHOW_GROUPS 0x00000002 /* show groups of a netlink socket */ +#ifndef __KERNEL__ #define NDIAG_SHOW_RING_CFG 0x00000004 /* show ring configuration */ +#endif #endif -- cgit v1.2.3 From 2125715635053d4207a756a35aa718f548824e58 Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Tue, 16 Feb 2016 12:46:54 +0100 Subject: bridge: mdb: add support for more attributes and export timer Currently mdb entries are exported directly as a structure inside MDBA_MDB_ENTRY_INFO attribute, we can't really extend it without breaking user-space. In order to export new mdb fields, I've converted the MDBA_MDB_ENTRY_INFO into a nested attribute which starts like before with struct br_mdb_entry (without header, as it's casted directly in iproute2) and continues with MDBA_MDB_EATTR_ attributes. This way we keep compatibility with older users and can export new data. I've tested this with iproute2, both with and without support for the added attribute and it works fine. So basically we again have MDBA_MDB_ENTRY_INFO with struct br_mdb_entry inside but it may contain also some additional MDBA_MDB_EATTR_ attributes such as MDBA_MDB_EATTR_TIMER which can be parsed by user-space. So the new structure is: [MDBA_MDB] = { [MDBA_MDB_ENTRY] = { [MDBA_MDB_ENTRY_INFO] [MDBA_MDB_ENTRY_INFO] { <- Nested attribute struct br_mdb_entry <- nla_put_nohdr() [MDBA_MDB_ENTRY attributes] <- normal netlink attributes } } } Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller --- include/uapi/linux/if_bridge.h | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index ec3547234998..0890b217580d 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -137,7 +137,10 @@ struct bridge_vlan_info { /* Bridge multicast database attributes * [MDBA_MDB] = { * [MDBA_MDB_ENTRY] = { - * [MDBA_MDB_ENTRY_INFO] + * [MDBA_MDB_ENTRY_INFO] { + * struct br_mdb_entry + * [MDBA_MDB_EATTR attributes] + * } * } * } * [MDBA_ROUTER] = { @@ -166,6 +169,14 @@ enum { }; #define MDBA_MDB_ENTRY_MAX (__MDBA_MDB_ENTRY_MAX - 1) +/* per mdb entry additional attributes */ +enum { + MDBA_MDB_EATTR_UNSPEC, + MDBA_MDB_EATTR_TIMER, + __MDBA_MDB_EATTR_MAX +}; +#define MDBA_MDB_EATTR_MAX (__MDBA_MDB_EATTR_MAX - 1) + enum { MDBA_ROUTER_UNSPEC, MDBA_ROUTER_PORT, -- cgit v1.2.3 From ac2c7ad0e5d6030452c9af2fafd192e17fd04264 Mon Sep 17 00:00:00 2001 From: Kan Liang Date: Fri, 19 Feb 2016 09:24:01 -0500 Subject: net/ethtool: introduce a new ioctl for per queue setting Introduce a new ioctl ETHTOOL_PERQUEUE for per queue parameters setting. The following patches will enable some SUB_COMMANDs for per queue setting. Signed-off-by: Kan Liang Reviewed-by: Ben Hutchings Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index 190aea0faaf4..f15ae02621a1 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -1202,6 +1202,21 @@ enum ethtool_sfeatures_retval_bits { #define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT) #define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT) +#define MAX_NUM_QUEUE 4096 + +/** + * struct ethtool_per_queue_op - apply sub command to the queues in mask. + * @cmd: ETHTOOL_PERQUEUE + * @sub_command: the sub command which apply to each queues + * @queue_mask: Bitmap of the queues which sub command apply to + * @data: A complete command structure following for each of the queues addressed + */ +struct ethtool_per_queue_op { + __u32 cmd; + __u32 sub_command; + __u32 queue_mask[DIV_ROUND_UP(MAX_NUM_QUEUE, 32)]; + char data[]; +}; /* CMDs currently supported */ #define ETHTOOL_GSET 0x00000001 /* Get settings. */ @@ -1285,6 +1300,8 @@ enum ethtool_sfeatures_retval_bits { #define ETHTOOL_STUNABLE 0x00000049 /* Set tunable configuration */ #define ETHTOOL_GPHYSTATS 0x0000004a /* get PHY-specific statistics */ +#define ETHTOOL_PERQUEUE 0x0000004b /* Set per queue options */ + /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET #define SPARC_ETH_SSET ETHTOOL_SSET -- cgit v1.2.3 From d5a3b1f691865be576c2bffa708549b8cdccda19 Mon Sep 17 00:00:00 2001 From: Alexei Starovoitov Date: Wed, 17 Feb 2016 19:58:58 -0800 Subject: bpf: introduce BPF_MAP_TYPE_STACK_TRACE add new map type to store stack traces and corresponding helper bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id @ctx: struct pt_regs* @map: pointer to stack_trace map @flags: bits 0-7 - numer of stack frames to skip bit 8 - collect user stack instead of kernel bit 9 - compare stacks by hash only bit 10 - if two different stacks hash into the same stackid discard old other bits - reserved Return: >= 0 stackid on success or negative error stackid is a 32-bit integer handle that can be further combined with other data (including other stackid) and used as a key into maps. Userspace will access stackmap using standard lookup/delete syscall commands to retrieve full stack trace for given stackid. Signed-off-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/uapi/linux/bpf.h | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 2ee0fde1bf96..d3e77da8e9e8 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -83,6 +83,7 @@ enum bpf_map_type { BPF_MAP_TYPE_PERF_EVENT_ARRAY, BPF_MAP_TYPE_PERCPU_HASH, BPF_MAP_TYPE_PERCPU_ARRAY, + BPF_MAP_TYPE_STACK_TRACE, }; enum bpf_prog_type { @@ -272,6 +273,20 @@ enum bpf_func_id { */ BPF_FUNC_perf_event_output, BPF_FUNC_skb_load_bytes, + + /** + * bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id + * @ctx: struct pt_regs* + * @map: pointer to stack_trace map + * @flags: bits 0-7 - numer of stack frames to skip + * bit 8 - collect user stack instead of kernel + * bit 9 - compare stacks by hash only + * bit 10 - if two different stacks hash into the same stackid + * discard old + * other bits - reserved + * Return: >= 0 stackid on success or negative error + */ + BPF_FUNC_get_stackid, __BPF_FUNC_MAX_ID, }; @@ -294,6 +309,12 @@ enum bpf_func_id { /* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */ #define BPF_F_TUNINFO_IPV6 (1ULL << 0) +/* BPF_FUNC_get_stackid flags. */ +#define BPF_F_SKIP_FIELD_MASK 0xffULL +#define BPF_F_USER_STACK (1ULL << 8) +#define BPF_F_FAST_STACK_CMP (1ULL << 9) +#define BPF_F_REUSE_STACKID (1ULL << 10) + /* user accessible mirror of in-kernel sk_buff. * new fields can only be added to the end of this structure */ -- cgit v1.2.3 From 7d672345ed295b1356a5d9f7111da1d1d7d65867 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 19 Feb 2016 23:05:23 +0100 Subject: bpf: add generic bpf_csum_diff helper For L4 checksums, we currently have bpf_l4_csum_replace() helper. It's currently limited to handle 2 and 4 byte changes in a header and feeds the from/to into inet_proto_csum_replace{2,4}() helpers of the kernel. When working with IPv6, for example, this makes it rather cumbersome to deal with, similarly when editing larger parts of a header. Instead, extend the API in a more generic way: For bpf_l4_csum_replace(), add a case for header field mask of 0 to change the checksum at a given offset through inet_proto_csum_replace_by_diff(), and provide a helper bpf_csum_diff() that can generically calculate a from/to diff for arbitrary amounts of data. This can be used in multiple ways: for the bpf_l4_csum_replace() only part, this even provides us with the option to insert precalculated diffs from user space f.e. from a map, or from bpf_csum_diff() during runtime. bpf_csum_diff() has a optional from/to stack buffer input, so we can calculate a diff by using a scratchbuffer for scenarios where we're inserting (from is NULL), removing (to is NULL) or diffing (from/to buffers don't need to be of equal size) data. Also, bpf_csum_diff() allows to feed a previous csum into csum_partial(), so the function can also be cascaded. Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/uapi/linux/bpf.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index d3e77da8e9e8..48d0a6c54609 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -287,6 +287,17 @@ enum bpf_func_id { * Return: >= 0 stackid on success or negative error */ BPF_FUNC_get_stackid, + + /** + * bpf_csum_diff(from, from_size, to, to_size, seed) - calculate csum diff + * @from: raw from buffer + * @from_size: length of from buffer + * @to: raw to buffer + * @to_size: length of to buffer + * @seed: optional seed + * Return: csum result + */ + BPF_FUNC_csum_diff, __BPF_FUNC_MAX_ID, }; -- cgit v1.2.3 From 2f72959a9c1260ade234f353ccca91118151af66 Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Fri, 19 Feb 2016 23:05:26 +0100 Subject: bpf: fix csum update in bpf_l4_csum_replace helper for udp When using this helper for updating UDP checksums, we need to extend this in order to write CSUM_MANGLED_0 for csum computations that result into 0 as sum. Reason we need this is because packets with a checksum could otherwise become incorrectly marked as a packet without a checksum. Likewise, if the user indicates BPF_F_MARK_MANGLED_0, then we should not turn packets without a checksum into ones with a checksum. Signed-off-by: Daniel Borkmann Acked-by: Alexei Starovoitov Signed-off-by: David S. Miller --- include/uapi/linux/bpf.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 48d0a6c54609..6496f98d3d68 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -313,6 +313,7 @@ enum bpf_func_id { /* BPF_FUNC_l4_csum_replace flags. */ #define BPF_F_PSEUDO_HDR (1ULL << 4) +#define BPF_F_MARK_MANGLED_0 (1ULL << 5) /* BPF_FUNC_clone_redirect and BPF_FUNC_redirect flags. */ #define BPF_F_INGRESS (1ULL << 0) -- cgit v1.2.3 From d4634e8dea13ccc969dd3f33dab3873cfdf3bc51 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jo=C3=A3o=20Paulo=20Rechi=20Vita?= Date: Tue, 19 Jan 2016 10:42:42 -0500 Subject: rfkill: Update userspace API documentation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add a note to userspace on the effect of RFKILL_OP_CHANGE_ALL also updating the default state for hotplugged devices. Signed-off-by: João Paulo Rechi Vita [reword a bit] Signed-off-by: Johannes Berg --- include/uapi/linux/rfkill.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/rfkill.h b/include/uapi/linux/rfkill.h index 058757f7a733..2e00dcebebd0 100644 --- a/include/uapi/linux/rfkill.h +++ b/include/uapi/linux/rfkill.h @@ -59,6 +59,8 @@ enum rfkill_type { * @RFKILL_OP_DEL: a device was removed * @RFKILL_OP_CHANGE: a device's state changed -- userspace changes one device * @RFKILL_OP_CHANGE_ALL: userspace changes all devices (of a type, or all) + * into a state, also updating the default state used for devices that + * are hot-plugged later. */ enum rfkill_operation { RFKILL_OP_ADD = 0, -- cgit v1.2.3 From 34d505193bd10668acf1caba02d2f66bddc23fea Mon Sep 17 00:00:00 2001 From: Lior David Date: Thu, 28 Jan 2016 10:58:25 +0200 Subject: cfg80211: basic support for PBSS network type PBSS (Personal Basic Service Set) is a new BSS type for DMG networks. It is similar to infrastructure BSS, having an AP-like entity called PCP (PBSS Control Point), but it has few differences. PBSS support is mandatory for 11ad devices. Add support for PBSS by introducing a new PBSS flag attribute. The PBSS flag is used in the START_AP command to request starting a PCP instead of an AP, and in the CONNECT command to request connecting to a PCP instead of an AP. Signed-off-by: Lior David Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5b7b5ebe7ca8..7758969a2a8e 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1789,6 +1789,10 @@ enum nl80211_commands { * thus it must not specify the number of iterations, only the interval * between scans. The scan plans are executed sequentially. * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan. + * @NL80211_ATTR_PBSS: flag attribute. If set it means operate + * in a PBSS. Specified in %NL80211_CMD_CONNECT to request + * connecting to a PCP, and in %NL80211_CMD_START_AP to start + * a PCP instead of AP. Relevant for DMG networks only. * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined @@ -2164,6 +2168,8 @@ enum nl80211_attrs { NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS, NL80211_ATTR_SCHED_SCAN_PLANS, + NL80211_ATTR_PBSS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 0c9ca11b1ae8eb16c1b6bbae91991392d2321372 Mon Sep 17 00:00:00 2001 From: Beni Lev Date: Wed, 17 Feb 2016 20:30:00 +0200 Subject: cfg80211: Add global RRM capability Today, the supplicant will add the RRM capabilities Information Element in the association request only if Quiet period is supported (NL80211_FEATURE_QUIET). Quiet is one of many RRM features, and there are other RRM features that are not related to Quiet (e.g. neighbor report). Therefore, requiring Quiet to enable RRM is too restrictive. Some of the features, like neighbor report, can be supported by user space without any help from the kernel. Hence adding the RRM capabilities IE to association request should be the sole user space's decision. Removing the RRM dependency on Quiet in the driver solves this problem, but using an old driver with a user space tool that would not require Quiet feature would be problematic: the user space would add NL80211_ATTR_USE_RRM in the association request even if the kernel doesn't advertize NL80211_FEATURE_QUIET and the association would be denied by the kernel. This solution adds a global RRM capability, that tells user space that it can request RRM capabilities IE publishment without any specific feature support in the kernel. Signed-off-by: Beni Lev Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- include/uapi/linux/nl80211.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 7758969a2a8e..5a30a7563633 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1727,6 +1727,8 @@ enum nl80211_commands { * underlying device supports these minimal RRM features: * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, * %NL80211_FEATURE_QUIET, + * Or, if global RRM is supported, see: + * %NL80211_EXT_FEATURE_RRM * If this flag is used, driver must add the Power Capabilities IE to the * association request. In addition, it must also set the RRM capability * flag in the association request's Capability Info field. @@ -4402,12 +4404,18 @@ enum nl80211_feature_flags { /** * enum nl80211_ext_feature_index - bit index of extended features. * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. + * @NL80211_EXT_FEATURE_RRM: This driver supports RRM. When featured, user can + * can request to use RRM (see %NL80211_ATTR_USE_RRM) with + * %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests, which will set + * the ASSOC_REQ_USE_RRM flag in the association request even if + * NL80211_FEATURE_QUIET is not advertized. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_VHT_IBSS, + NL80211_EXT_FEATURE_RRM, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -- cgit v1.2.3 From f1705ec197e705b79ea40fe7a2cc5acfa1d3bfac Mon Sep 17 00:00:00 2001 From: David Ahern Date: Wed, 24 Feb 2016 09:25:37 -0800 Subject: net: ipv6: Make address flushing on ifdown optional Currently, all ipv6 addresses are flushed when the interface is configured down, including global, static addresses: $ ip -6 addr show dev eth1 3: eth1: mtu 1500 state UP qlen 1000 inet6 2100:1::2/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe79:34bd/64 scope link valid_lft forever preferred_lft forever $ ip link set dev eth1 down $ ip -6 addr show dev eth1 << nothing; all addresses have been flushed>> Add a new sysctl to make this behavior optional. The new setting defaults to flush all addresses to maintain backwards compatibility. When the set global addresses with no expire times are not flushed on an admin down. The sysctl is per-interface or system-wide for all interfaces $ sysctl -w net.ipv6.conf.eth1.keep_addr_on_down=1 or $ sysctl -w net.ipv6.conf.all.keep_addr_on_down=1 Will keep addresses on eth1 on an admin down. $ ip -6 addr show dev eth1 3: eth1: mtu 1500 state UP qlen 1000 inet6 2100:1::2/120 scope global valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe79:34bd/64 scope link valid_lft forever preferred_lft forever $ ip link set dev eth1 down $ ip -6 addr show dev eth1 3: eth1: mtu 1500 state DOWN qlen 1000 inet6 2100:1::2/120 scope global tentative valid_lft forever preferred_lft forever inet6 fe80::e0:f9ff:fe79:34bd/64 scope link tentative valid_lft forever preferred_lft forever Signed-off-by: David Ahern Signed-off-by: David S. Miller --- include/uapi/linux/ipv6.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index ec117b65d5a5..395876060f50 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -176,6 +176,7 @@ enum { DEVCONF_IGNORE_ROUTES_WITH_LINKDOWN, DEVCONF_DROP_UNICAST_IN_L2_MULTICAST, DEVCONF_DROP_UNSOLICITED_NA, + DEVCONF_KEEP_ADDR_ON_DOWN, DEVCONF_MAX }; -- cgit v1.2.3 From 3f1ac7a700d039c61d8d8b99f28d605d489a60cf Mon Sep 17 00:00:00 2001 From: David Decotigny Date: Wed, 24 Feb 2016 10:57:59 -0800 Subject: net: ethtool: add new ETHTOOL_xLINKSETTINGS API This patch defines a new ETHTOOL_GLINKSETTINGS/SLINKSETTINGS API, handled by the new get_link_ksettings/set_link_ksettings callbacks. This API provides support for most legacy ethtool_cmd fields, adds support for larger link mode masks (up to 4064 bits, variable length), and removes ethtool_cmd deprecated fields (transceiver/maxrxpkt/maxtxpkt). This API is deprecating the legacy ETHTOOL_GSET/SSET API and provides the following backward compatibility properties: - legacy ethtool with legacy drivers: no change, still using the get_settings/set_settings callbacks. - legacy ethtool with new get/set_link_ksettings drivers: the new driver callbacks are used, data internally converted to legacy ethtool_cmd. ETHTOOL_GSET will return only the 1st 32b of each link mode mask. ETHTOOL_SSET will fail if user tries to set the ethtool_cmd deprecated fields to non-0 (transceiver/maxrxpkt/maxtxpkt). A kernel warning is logged if driver sets higher bits. - future ethtool with legacy drivers: no change, still using the get_settings/set_settings callbacks, internally converted to new data structure. Deprecated fields (transceiver/maxrxpkt/maxtxpkt) will be ignored and seen as 0 from user space. Note that that "future" ethtool tool will not allow changes to these deprecated fields. - future ethtool with new drivers: direct call to the new callbacks. By "future" ethtool, what is meant is: - query: first try ETHTOOL_GLINKSETTINGS, and revert to ETHTOOL_GSET if fails - set: query first and remember which of ETHTOOL_GLINKSETTINGS or ETHTOOL_GSET was successful + if ETHTOOL_GLINKSETTINGS was successful, then change config with ETHTOOL_SLINKSETTINGS. A failure there is final (do not try ETHTOOL_SSET). + otherwise ETHTOOL_GSET was successful, change config with ETHTOOL_SSET. A failure there is final (do not try ETHTOOL_SLINKSETTINGS). The interaction user/kernel via the new API requires a small ETHTOOL_GLINKSETTINGS handshake first to agree on the length of the link mode bitmaps. If kernel doesn't agree with user, it returns the bitmap length it is expecting from user as a negative length (and cmd field is 0). When kernel and user agree, kernel returns valid info in all fields (ie. link mode length > 0 and cmd is ETHTOOL_GLINKSETTINGS). Data structure crossing user/kernel boundary is 32/64-bit agnostic. Converted internally to a legal kernel bitmap. The internal __ethtool_get_settings kernel helper will gradually be replaced by __ethtool_get_link_ksettings by the time the first "link_settings" drivers start to appear. So this patch doesn't change it, it will be removed before it needs to be changed. Signed-off-by: David Decotigny Signed-off-by: David S. Miller --- include/uapi/linux/ethtool.h | 322 ++++++++++++++++++++++++++++++++++--------- 1 file changed, 256 insertions(+), 66 deletions(-) (limited to 'include/uapi/linux') diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index f15ae02621a1..37fd6dc33de4 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -21,7 +21,8 @@ */ /** - * struct ethtool_cmd - link control and status + * struct ethtool_cmd - DEPRECATED, link control and status + * This structure is DEPRECATED, please use struct ethtool_link_settings. * @cmd: Command number = %ETHTOOL_GSET or %ETHTOOL_SSET * @supported: Bitmask of %SUPPORTED_* flags for the link modes, * physical connectors and other link features for which the @@ -1219,8 +1220,12 @@ struct ethtool_per_queue_op { }; /* CMDs currently supported */ -#define ETHTOOL_GSET 0x00000001 /* Get settings. */ -#define ETHTOOL_SSET 0x00000002 /* Set settings. */ +#define ETHTOOL_GSET 0x00000001 /* DEPRECATED, Get settings. + * Please use ETHTOOL_GLINKSETTINGS + */ +#define ETHTOOL_SSET 0x00000002 /* DEPRECATED, Set settings. + * Please use ETHTOOL_SLINKSETTINGS + */ #define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */ #define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */ #define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */ @@ -1302,73 +1307,139 @@ struct ethtool_per_queue_op { #define ETHTOOL_PERQUEUE 0x0000004b /* Set per queue options */ +#define ETHTOOL_GLINKSETTINGS 0x0000004c /* Get ethtool_link_settings */ +#define ETHTOOL_SLINKSETTINGS 0x0000004d /* Set ethtool_link_settings */ + + /* compatibility with older code */ #define SPARC_ETH_GSET ETHTOOL_GSET #define SPARC_ETH_SSET ETHTOOL_SSET -#define SUPPORTED_10baseT_Half (1 << 0) -#define SUPPORTED_10baseT_Full (1 << 1) -#define SUPPORTED_100baseT_Half (1 << 2) -#define SUPPORTED_100baseT_Full (1 << 3) -#define SUPPORTED_1000baseT_Half (1 << 4) -#define SUPPORTED_1000baseT_Full (1 << 5) -#define SUPPORTED_Autoneg (1 << 6) -#define SUPPORTED_TP (1 << 7) -#define SUPPORTED_AUI (1 << 8) -#define SUPPORTED_MII (1 << 9) -#define SUPPORTED_FIBRE (1 << 10) -#define SUPPORTED_BNC (1 << 11) -#define SUPPORTED_10000baseT_Full (1 << 12) -#define SUPPORTED_Pause (1 << 13) -#define SUPPORTED_Asym_Pause (1 << 14) -#define SUPPORTED_2500baseX_Full (1 << 15) -#define SUPPORTED_Backplane (1 << 16) -#define SUPPORTED_1000baseKX_Full (1 << 17) -#define SUPPORTED_10000baseKX4_Full (1 << 18) -#define SUPPORTED_10000baseKR_Full (1 << 19) -#define SUPPORTED_10000baseR_FEC (1 << 20) -#define SUPPORTED_20000baseMLD2_Full (1 << 21) -#define SUPPORTED_20000baseKR2_Full (1 << 22) -#define SUPPORTED_40000baseKR4_Full (1 << 23) -#define SUPPORTED_40000baseCR4_Full (1 << 24) -#define SUPPORTED_40000baseSR4_Full (1 << 25) -#define SUPPORTED_40000baseLR4_Full (1 << 26) -#define SUPPORTED_56000baseKR4_Full (1 << 27) -#define SUPPORTED_56000baseCR4_Full (1 << 28) -#define SUPPORTED_56000baseSR4_Full (1 << 29) -#define SUPPORTED_56000baseLR4_Full (1 << 30) - -#define ADVERTISED_10baseT_Half (1 << 0) -#define ADVERTISED_10baseT_Full (1 << 1) -#define ADVERTISED_100baseT_Half (1 << 2) -#define ADVERTISED_100baseT_Full (1 << 3) -#define ADVERTISED_1000baseT_Half (1 << 4) -#define ADVERTISED_1000baseT_Full (1 << 5) -#define ADVERTISED_Autoneg (1 << 6) -#define ADVERTISED_TP (1 << 7) -#define ADVERTISED_AUI (1 << 8) -#define ADVERTISED_MII (1 << 9) -#define ADVERTISED_FIBRE (1 << 10) -#define ADVERTISED_BNC (1 << 11) -#define ADVERTISED_10000baseT_Full (1 << 12) -#define ADVERTISED_Pause (1 << 13) -#define ADVERTISED_Asym_Pause (1 << 14) -#define ADVERTISED_2500baseX_Full (1 << 15) -#define ADVERTISED_Backplane (1 << 16) -#define ADVERTISED_1000baseKX_Full (1 << 17) -#define ADVERTISED_10000baseKX4_Full (1 << 18) -#define ADVERTISED_10000baseKR_Full (1 << 19) -#define ADVERTISED_10000baseR_FEC (1 << 20) -#define ADVERTISED_20000baseMLD2_Full (1 << 21) -#define ADVERTISED_20000baseKR2_Full (1 << 22) -#define ADVERTISED_40000baseKR4_Full (1 << 23) -#define ADVERTISED_40000baseCR4_Full (1 << 24) -#define ADVERTISED_40000baseSR4_Full (1 << 25) -#define ADVERTISED_40000baseLR4_Full (1 << 26) -#define ADVERTISED_56000baseKR4_Full (1 << 27) -#define ADVERTISED_56000baseCR4_Full (1 << 28) -#define ADVERTISED_56000baseSR4_Full (1 << 29) -#define ADVERTISED_56000baseLR4_Full (1 << 30) +/* Link mode bit indices */ +enum ethtool_link_mode_bit_indices { + ETHTOOL_LINK_MODE_10baseT_Half_BIT = 0, + ETHTOOL_LINK_MODE_10baseT_Full_BIT = 1, + ETHTOOL_LINK_MODE_100baseT_Half_BIT = 2, + ETHTOOL_LINK_MODE_100baseT_Full_BIT = 3, + ETHTOOL_LINK_MODE_1000baseT_Half_BIT = 4, + ETHTOOL_LINK_MODE_1000baseT_Full_BIT = 5, + ETHTOOL_LINK_MODE_Autoneg_BIT = 6, + ETHTOOL_LINK_MODE_TP_BIT = 7, + ETHTOOL_LINK_MODE_AUI_BIT = 8, + ETHTOOL_LINK_MODE_MII_BIT = 9, + ETHTOOL_LINK_MODE_FIBRE_BIT = 10, + ETHTOOL_LINK_MODE_BNC_BIT = 11, + ETHTOOL_LINK_MODE_10000baseT_Full_BIT = 12, + ETHTOOL_LINK_MODE_Pause_BIT = 13, + ETHTOOL_LINK_MODE_Asym_Pause_BIT = 14, + ETHTOOL_LINK_MODE_2500baseX_Full_BIT = 15, + ETHTOOL_LINK_MODE_Backplane_BIT = 16, + ETHTOOL_LINK_MODE_1000baseKX_Full_BIT = 17, + ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT = 18, + ETHTOOL_LINK_MODE_10000baseKR_Full_BIT = 19, + ETHTOOL_LINK_MODE_10000baseR_FEC_BIT = 20, + ETHTOOL_LINK_MODE_20000baseMLD2_Full_BIT = 21, + ETHTOOL_LINK_MODE_20000baseKR2_Full_BIT = 22, + ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT = 23, + ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT = 24, + ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT = 25, + ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT = 26, + ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT = 27, + ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT = 28, + ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT = 29, + ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT = 30, + + /* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit + * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_* + * macro for bits > 31. The only way to use indices > 31 is to + * use the new ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. + */ + + __ETHTOOL_LINK_MODE_LAST + = ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT, +}; + +#define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name) \ + (1UL << (ETHTOOL_LINK_MODE_ ## base_name ## _BIT)) + +/* DEPRECATED macros. Please migrate to + * ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT + * define any new SUPPORTED_* macro for bits > 31. + */ +#define SUPPORTED_10baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half) +#define SUPPORTED_10baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full) +#define SUPPORTED_100baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half) +#define SUPPORTED_100baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full) +#define SUPPORTED_1000baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half) +#define SUPPORTED_1000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full) +#define SUPPORTED_Autoneg __ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg) +#define SUPPORTED_TP __ETHTOOL_LINK_MODE_LEGACY_MASK(TP) +#define SUPPORTED_AUI __ETHTOOL_LINK_MODE_LEGACY_MASK(AUI) +#define SUPPORTED_MII __ETHTOOL_LINK_MODE_LEGACY_MASK(MII) +#define SUPPORTED_FIBRE __ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE) +#define SUPPORTED_BNC __ETHTOOL_LINK_MODE_LEGACY_MASK(BNC) +#define SUPPORTED_10000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full) +#define SUPPORTED_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Pause) +#define SUPPORTED_Asym_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause) +#define SUPPORTED_2500baseX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full) +#define SUPPORTED_Backplane __ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane) +#define SUPPORTED_1000baseKX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full) +#define SUPPORTED_10000baseKX4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full) +#define SUPPORTED_10000baseKR_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full) +#define SUPPORTED_10000baseR_FEC __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC) +#define SUPPORTED_20000baseMLD2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full) +#define SUPPORTED_20000baseKR2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full) +#define SUPPORTED_40000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full) +#define SUPPORTED_40000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full) +#define SUPPORTED_40000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full) +#define SUPPORTED_40000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full) +#define SUPPORTED_56000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full) +#define SUPPORTED_56000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full) +#define SUPPORTED_56000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full) +#define SUPPORTED_56000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full) +/* Please do not define any new SUPPORTED_* macro for bits > 31, see + * notice above. + */ + +/* + * DEPRECATED macros. Please migrate to + * ETHTOOL_GLINKSETTINGS/ETHTOOL_SLINKSETTINGS API. Please do NOT + * define any new ADERTISE_* macro for bits > 31. + */ +#define ADVERTISED_10baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Half) +#define ADVERTISED_10baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10baseT_Full) +#define ADVERTISED_100baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Half) +#define ADVERTISED_100baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(100baseT_Full) +#define ADVERTISED_1000baseT_Half __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Half) +#define ADVERTISED_1000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseT_Full) +#define ADVERTISED_Autoneg __ETHTOOL_LINK_MODE_LEGACY_MASK(Autoneg) +#define ADVERTISED_TP __ETHTOOL_LINK_MODE_LEGACY_MASK(TP) +#define ADVERTISED_AUI __ETHTOOL_LINK_MODE_LEGACY_MASK(AUI) +#define ADVERTISED_MII __ETHTOOL_LINK_MODE_LEGACY_MASK(MII) +#define ADVERTISED_FIBRE __ETHTOOL_LINK_MODE_LEGACY_MASK(FIBRE) +#define ADVERTISED_BNC __ETHTOOL_LINK_MODE_LEGACY_MASK(BNC) +#define ADVERTISED_10000baseT_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseT_Full) +#define ADVERTISED_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Pause) +#define ADVERTISED_Asym_Pause __ETHTOOL_LINK_MODE_LEGACY_MASK(Asym_Pause) +#define ADVERTISED_2500baseX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(2500baseX_Full) +#define ADVERTISED_Backplane __ETHTOOL_LINK_MODE_LEGACY_MASK(Backplane) +#define ADVERTISED_1000baseKX_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(1000baseKX_Full) +#define ADVERTISED_10000baseKX4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKX4_Full) +#define ADVERTISED_10000baseKR_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseKR_Full) +#define ADVERTISED_10000baseR_FEC __ETHTOOL_LINK_MODE_LEGACY_MASK(10000baseR_FEC) +#define ADVERTISED_20000baseMLD2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseMLD2_Full) +#define ADVERTISED_20000baseKR2_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(20000baseKR2_Full) +#define ADVERTISED_40000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseKR4_Full) +#define ADVERTISED_40000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseCR4_Full) +#define ADVERTISED_40000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseSR4_Full) +#define ADVERTISED_40000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(40000baseLR4_Full) +#define ADVERTISED_56000baseKR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseKR4_Full) +#define ADVERTISED_56000baseCR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseCR4_Full) +#define ADVERTISED_56000baseSR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseSR4_Full) +#define ADVERTISED_56000baseLR4_Full __ETHTOOL_LINK_MODE_LEGACY_MASK(56000baseLR4_Full) +/* Please do not define any new ADVERTISED_* macro for bits > 31, see + * notice above. + */ /* The following are all involved in forcing a particular link * mode for the device for setting things. When getting the @@ -1533,4 +1604,123 @@ enum ethtool_reset_flags { }; #define ETH_RESET_SHARED_SHIFT 16 + +/** + * struct ethtool_link_settings - link control and status + * + * IMPORTANT, Backward compatibility notice: When implementing new + * user-space tools, please first try %ETHTOOL_GLINKSETTINGS, and + * if it succeeds use %ETHTOOL_SLINKSETTINGS to change link + * settings; do not use %ETHTOOL_SSET if %ETHTOOL_GLINKSETTINGS + * succeeded: stick to %ETHTOOL_GLINKSETTINGS/%SLINKSETTINGS in + * that case. Conversely, if %ETHTOOL_GLINKSETTINGS fails, use + * %ETHTOOL_GSET to query and %ETHTOOL_SSET to change link + * settings; do not use %ETHTOOL_SLINKSETTINGS if + * %ETHTOOL_GLINKSETTINGS failed: stick to + * %ETHTOOL_GSET/%ETHTOOL_SSET in that case. + * + * @cmd: Command number = %ETHTOOL_GLINKSETTINGS or %ETHTOOL_SLINKSETTINGS + * @speed: Link speed (Mbps) + * @duplex: Duplex mode; one of %DUPLEX_* + * @port: Physical connector type; one of %PORT_* + * @phy_address: MDIO address of PHY (transceiver); 0 or 255 if not + * applicable. For clause 45 PHYs this is the PRTAD. + * @autoneg: Enable/disable autonegotiation and auto-detection; + * either %AUTONEG_DISABLE or %AUTONEG_ENABLE + * @mdio_support: Bitmask of %ETH_MDIO_SUPPORTS_* flags for the MDIO + * protocols supported by the interface; 0 if unknown. + * Read-only. + * @eth_tp_mdix: Ethernet twisted-pair MDI(-X) status; one of + * %ETH_TP_MDI_*. If the status is unknown or not applicable, the + * value will be %ETH_TP_MDI_INVALID. Read-only. + * @eth_tp_mdix_ctrl: Ethernet twisted pair MDI(-X) control; one of + * %ETH_TP_MDI_*. If MDI(-X) control is not implemented, reads + * yield %ETH_TP_MDI_INVALID and writes may be ignored or rejected. + * When written successfully, the link should be renegotiated if + * necessary. + * @link_mode_masks_nwords: Number of 32-bit words for each of the + * supported, advertising, lp_advertising link mode bitmaps. For + * %ETHTOOL_GLINKSETTINGS: on entry, number of words passed by user + * (>= 0); on return, if handshake in progress, negative if +