From 69674282fc97fffd98a85ab5b4837edbc5898145 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 5 Nov 2025 15:36:49 +0100 Subject: wifi: ieee80211: split mesh definitions out The ieee80211.h file has gotten very long, start splitting it by putting mesh definitions into a separate file. Link: https://patch.msgid.link/20251105153843.489713ca8b34.I3befb4bf6ace0315758a1794224ddd18c4652e32@changeid Signed-off-by: Johannes Berg --- include/linux/ieee80211-mesh.h | 230 +++++++++++++++++++++++++++++++++++++++++ include/linux/ieee80211.h | 211 +------------------------------------ 2 files changed, 232 insertions(+), 209 deletions(-) create mode 100644 include/linux/ieee80211-mesh.h (limited to 'include/linux') diff --git a/include/linux/ieee80211-mesh.h b/include/linux/ieee80211-mesh.h new file mode 100644 index 000000000000..4b829bcb38b6 --- /dev/null +++ b/include/linux/ieee80211-mesh.h @@ -0,0 +1,230 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * IEEE 802.11 mesh definitions + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * + * Copyright (c) 2002-2003, Jouni Malinen + * Copyright (c) 2005, Devicescape Software, Inc. + * Copyright (c) 2006, Michael Wu + * Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright (c) 2016 - 2017 Intel Deutschland GmbH + * Copyright (c) 2018 - 2025 Intel Corporation + */ + +#ifndef LINUX_IEEE80211_MESH_H +#define LINUX_IEEE80211_MESH_H + +#include +#include + +#define IEEE80211_MAX_MESH_ID_LEN 32 + +struct ieee80211s_hdr { + u8 flags; + u8 ttl; + __le32 seqnum; + u8 eaddr1[ETH_ALEN]; + u8 eaddr2[ETH_ALEN]; +} __packed __aligned(2); + +/* Mesh flags */ +#define MESH_FLAGS_AE_A4 0x1 +#define MESH_FLAGS_AE_A5_A6 0x2 +#define MESH_FLAGS_AE 0x3 +#define MESH_FLAGS_PS_DEEP 0x4 + +/** + * enum ieee80211_preq_flags - mesh PREQ element flags + * + * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield + */ +enum ieee80211_preq_flags { + IEEE80211_PREQ_PROACTIVE_PREP_FLAG = 1<<2, +}; + +/** + * enum ieee80211_preq_target_flags - mesh PREQ element per target flags + * + * @IEEE80211_PREQ_TO_FLAG: target only subfield + * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield + */ +enum ieee80211_preq_target_flags { + IEEE80211_PREQ_TO_FLAG = 1<<0, + IEEE80211_PREQ_USN_FLAG = 1<<2, +}; + +/** + * struct ieee80211_mesh_chansw_params_ie - mesh channel switch parameters IE + * @mesh_ttl: Time To Live + * @mesh_flags: Flags + * @mesh_reason: Reason Code + * @mesh_pre_value: Precedence Value + * + * This structure represents the payload of the "Mesh Channel Switch + * Parameters element" as described in IEEE Std 802.11-2020 section + * 9.4.2.102. + */ +struct ieee80211_mesh_chansw_params_ie { + u8 mesh_ttl; + u8 mesh_flags; + __le16 mesh_reason; + __le16 mesh_pre_value; +} __packed; + +/** + * struct ieee80211_meshconf_ie - Mesh Configuration element + * @meshconf_psel: Active Path Selection Protocol Identifier + * @meshconf_pmetric: Active Path Selection Metric Identifier + * @meshconf_congest: Congestion Control Mode Identifier + * @meshconf_synch: Synchronization Method Identifier + * @meshconf_auth: Authentication Protocol Identifier + * @meshconf_form: Mesh Formation Info + * @meshconf_cap: Mesh Capability (see &enum mesh_config_capab_flags) + * + * This structure represents the payload of the "Mesh Configuration + * element" as described in IEEE Std 802.11-2020 section 9.4.2.97. + */ +struct ieee80211_meshconf_ie { + u8 meshconf_psel; + u8 meshconf_pmetric; + u8 meshconf_congest; + u8 meshconf_synch; + u8 meshconf_auth; + u8 meshconf_form; + u8 meshconf_cap; +} __packed; + +/** + * enum mesh_config_capab_flags - Mesh Configuration IE capability field flags + * + * @IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS: STA is willing to establish + * additional mesh peerings with other mesh STAs + * @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs + * @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure + * is ongoing + * @IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL: STA is in deep sleep mode or has + * neighbors in deep sleep mode + * + * Enumerates the "Mesh Capability" as described in IEEE Std + * 802.11-2020 section 9.4.2.97.7. + */ +enum mesh_config_capab_flags { + IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS = 0x01, + IEEE80211_MESHCONF_CAPAB_FORWARDING = 0x08, + IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20, + IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL = 0x40, +}; + +#define IEEE80211_MESHCONF_FORM_CONNECTED_TO_GATE 0x1 + +/* + * mesh channel switch parameters element's flag indicator + * + */ +#define WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT BIT(0) +#define WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR BIT(1) +#define WLAN_EID_CHAN_SWITCH_PARAM_REASON BIT(2) + +/** + * struct ieee80211_rann_ie - RANN (root announcement) element + * @rann_flags: Flags + * @rann_hopcount: Hop Count + * @rann_ttl: Element TTL + * @rann_addr: Root Mesh STA Address + * @rann_seq: HWMP Sequence Number + * @rann_interval: Interval + * @rann_metric: Metric + * + * This structure represents the payload of the "RANN element" as + * described in IEEE Std 802.11-2020 section 9.4.2.111. + */ +struct ieee80211_rann_ie { + u8 rann_flags; + u8 rann_hopcount; + u8 rann_ttl; + u8 rann_addr[ETH_ALEN]; + __le32 rann_seq; + __le32 rann_interval; + __le32 rann_metric; +} __packed; + +enum ieee80211_rann_flags { + RANN_FLAG_IS_GATE = 1 << 0, +}; + +/* Mesh action codes */ +enum ieee80211_mesh_actioncode { + WLAN_MESH_ACTION_LINK_METRIC_REPORT, + WLAN_MESH_ACTION_HWMP_PATH_SELECTION, + WLAN_MESH_ACTION_GATE_ANNOUNCEMENT, + WLAN_MESH_ACTION_CONGESTION_CONTROL_NOTIFICATION, + WLAN_MESH_ACTION_MCCA_SETUP_REQUEST, + WLAN_MESH_ACTION_MCCA_SETUP_REPLY, + WLAN_MESH_ACTION_MCCA_ADVERTISEMENT_REQUEST, + WLAN_MESH_ACTION_MCCA_ADVERTISEMENT, + WLAN_MESH_ACTION_MCCA_TEARDOWN, + WLAN_MESH_ACTION_TBTT_ADJUSTMENT_REQUEST, + WLAN_MESH_ACTION_TBTT_ADJUSTMENT_RESPONSE, +}; + +/** + * enum ieee80211_mesh_sync_method - mesh synchronization method identifier + * + * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method + * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method + * that will be specified in a vendor specific information element + */ +enum ieee80211_mesh_sync_method { + IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1, + IEEE80211_SYNC_METHOD_VENDOR = 255, +}; + +/** + * enum ieee80211_mesh_path_protocol - mesh path selection protocol identifier + * + * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol + * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will + * be specified in a vendor specific information element + */ +enum ieee80211_mesh_path_protocol { + IEEE80211_PATH_PROTOCOL_HWMP = 1, + IEEE80211_PATH_PROTOCOL_VENDOR = 255, +}; + +/** + * enum ieee80211_mesh_path_metric - mesh path selection metric identifier + * + * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric + * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be + * specified in a vendor specific information element + */ +enum ieee80211_mesh_path_metric { + IEEE80211_PATH_METRIC_AIRTIME = 1, + IEEE80211_PATH_METRIC_VENDOR = 255, +}; + +/** + * enum ieee80211_root_mode_identifier - root mesh STA mode identifier + * + * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode + * + * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default) + * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than + * this value + * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports + * the proactive PREQ with proactive PREP subfield set to 0 + * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA + * supports the proactive PREQ with proactive PREP subfield set to 1 + * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports + * the proactive RANN + */ +enum ieee80211_root_mode_identifier { + IEEE80211_ROOTMODE_NO_ROOT = 0, + IEEE80211_ROOTMODE_ROOT = 1, + IEEE80211_PROACTIVE_PREQ_NO_PREP = 2, + IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3, + IEEE80211_PROACTIVE_RANN = 4, +}; + +#endif /* LINUX_IEEE80211_MESH_H */ diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index ddff9102f633..fe78b150ab45 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -252,8 +252,6 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2) #define IEEE80211_MAX_SSID_LEN 32 -#define IEEE80211_MAX_MESH_ID_LEN 32 - #define IEEE80211_FIRST_TSPEC_TSID 8 #define IEEE80211_NUM_TIDS 16 @@ -881,40 +879,6 @@ static inline u16 ieee80211_get_sn(struct ieee80211_hdr *hdr) return le16_get_bits(hdr->seq_ctrl, IEEE80211_SCTL_SEQ); } -struct ieee80211s_hdr { - u8 flags; - u8 ttl; - __le32 seqnum; - u8 eaddr1[ETH_ALEN]; - u8 eaddr2[ETH_ALEN]; -} __packed __aligned(2); - -/* Mesh flags */ -#define MESH_FLAGS_AE_A4 0x1 -#define MESH_FLAGS_AE_A5_A6 0x2 -#define MESH_FLAGS_AE 0x3 -#define MESH_FLAGS_PS_DEEP 0x4 - -/** - * enum ieee80211_preq_flags - mesh PREQ element flags - * - * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield - */ -enum ieee80211_preq_flags { - IEEE80211_PREQ_PROACTIVE_PREP_FLAG = 1<<2, -}; - -/** - * enum ieee80211_preq_target_flags - mesh PREQ element per target flags - * - * @IEEE80211_PREQ_TO_FLAG: target only subfield - * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield - */ -enum ieee80211_preq_target_flags { - IEEE80211_PREQ_TO_FLAG = 1<<0, - IEEE80211_PREQ_USN_FLAG = 1<<2, -}; - /** * struct ieee80211_quiet_ie - Quiet element * @count: Quiet Count @@ -993,24 +957,6 @@ struct ieee80211_sec_chan_offs_ie { u8 sec_chan_offs; } __packed; -/** - * struct ieee80211_mesh_chansw_params_ie - mesh channel switch parameters IE - * @mesh_ttl: Time To Live - * @mesh_flags: Flags - * @mesh_reason: Reason Code - * @mesh_pre_value: Precedence Value - * - * This structure represents the payload of the "Mesh Channel Switch - * Parameters element" as described in IEEE Std 802.11-2020 section - * 9.4.2.102. - */ -struct ieee80211_mesh_chansw_params_ie { - u8 mesh_ttl; - u8 mesh_flags; - __le16 mesh_reason; - __le16 mesh_pre_value; -} __packed; - /** * struct ieee80211_wide_bw_chansw_ie - wide bandwidth channel switch IE * @new_channel_width: New Channel Width @@ -1051,87 +997,6 @@ struct ieee80211_tim_ie { }; } __packed; -/** - * struct ieee80211_meshconf_ie - Mesh Configuration element - * @meshconf_psel: Active Path Selection Protocol Identifier - * @meshconf_pmetric: Active Path Selection Metric Identifier - * @meshconf_congest: Congestion Control Mode Identifier - * @meshconf_synch: Synchronization Method Identifier - * @meshconf_auth: Authentication Protocol Identifier - * @meshconf_form: Mesh Formation Info - * @meshconf_cap: Mesh Capability (see &enum mesh_config_capab_flags) - * - * This structure represents the payload of the "Mesh Configuration - * element" as described in IEEE Std 802.11-2020 section 9.4.2.97. - */ -struct ieee80211_meshconf_ie { - u8 meshconf_psel; - u8 meshconf_pmetric; - u8 meshconf_congest; - u8 meshconf_synch; - u8 meshconf_auth; - u8 meshconf_form; - u8 meshconf_cap; -} __packed; - -/** - * enum mesh_config_capab_flags - Mesh Configuration IE capability field flags - * - * @IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS: STA is willing to establish - * additional mesh peerings with other mesh STAs - * @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs - * @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure - * is ongoing - * @IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL: STA is in deep sleep mode or has - * neighbors in deep sleep mode - * - * Enumerates the "Mesh Capability" as described in IEEE Std - * 802.11-2020 section 9.4.2.97.7. - */ -enum mesh_config_capab_flags { - IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS = 0x01, - IEEE80211_MESHCONF_CAPAB_FORWARDING = 0x08, - IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20, - IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL = 0x40, -}; - -#define IEEE80211_MESHCONF_FORM_CONNECTED_TO_GATE 0x1 - -/* - * mesh channel switch parameters element's flag indicator - * - */ -#define WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT BIT(0) -#define WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR BIT(1) -#define WLAN_EID_CHAN_SWITCH_PARAM_REASON BIT(2) - -/** - * struct ieee80211_rann_ie - RANN (root announcement) element - * @rann_flags: Flags - * @rann_hopcount: Hop Count - * @rann_ttl: Element TTL - * @rann_addr: Root Mesh STA Address - * @rann_seq: HWMP Sequence Number - * @rann_interval: Interval - * @rann_metric: Metric - * - * This structure represents the payload of the "RANN element" as - * described in IEEE Std 802.11-2020 section 9.4.2.111. - */ -struct ieee80211_rann_ie { - u8 rann_flags; - u8 rann_hopcount; - u8 rann_ttl; - u8 rann_addr[ETH_ALEN]; - __le32 rann_seq; - __le32 rann_interval; - __le32 rann_metric; -} __packed; - -enum ieee80211_rann_flags { - RANN_FLAG_IS_GATE = 1 << 0, -}; - enum ieee80211_ht_chanwidth_values { IEEE80211_HT_CHANWIDTH_20MHZ = 0, IEEE80211_HT_CHANWIDTH_ANY = 1, @@ -3971,21 +3836,6 @@ enum ieee80211_self_protected_actioncode { WLAN_SP_MGK_ACK = 5, }; -/* Mesh action codes */ -enum ieee80211_mesh_actioncode { - WLAN_MESH_ACTION_LINK_METRIC_REPORT, - WLAN_MESH_ACTION_HWMP_PATH_SELECTION, - WLAN_MESH_ACTION_GATE_ANNOUNCEMENT, - WLAN_MESH_ACTION_CONGESTION_CONTROL_NOTIFICATION, - WLAN_MESH_ACTION_MCCA_SETUP_REQUEST, - WLAN_MESH_ACTION_MCCA_SETUP_REPLY, - WLAN_MESH_ACTION_MCCA_ADVERTISEMENT_REQUEST, - WLAN_MESH_ACTION_MCCA_ADVERTISEMENT, - WLAN_MESH_ACTION_MCCA_TEARDOWN, - WLAN_MESH_ACTION_TBTT_ADJUSTMENT_REQUEST, - WLAN_MESH_ACTION_TBTT_ADJUSTMENT_RESPONSE, -}; - /* Unprotected WNM action codes */ enum ieee80211_unprotected_wnm_actioncode { WLAN_UNPROTECTED_WNM_ACTION_TIM = 0, @@ -4198,65 +4048,6 @@ enum ieee80211_tdls_actioncode { /* BSS Coex IE information field bits */ #define WLAN_BSS_COEX_INFORMATION_REQUEST BIT(0) -/** - * enum ieee80211_mesh_sync_method - mesh synchronization method identifier - * - * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method - * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method - * that will be specified in a vendor specific information element - */ -enum ieee80211_mesh_sync_method { - IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1, - IEEE80211_SYNC_METHOD_VENDOR = 255, -}; - -/** - * enum ieee80211_mesh_path_protocol - mesh path selection protocol identifier - * - * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol - * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will - * be specified in a vendor specific information element - */ -enum ieee80211_mesh_path_protocol { - IEEE80211_PATH_PROTOCOL_HWMP = 1, - IEEE80211_PATH_PROTOCOL_VENDOR = 255, -}; - -/** - * enum ieee80211_mesh_path_metric - mesh path selection metric identifier - * - * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric - * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be - * specified in a vendor specific information element - */ -enum ieee80211_mesh_path_metric { - IEEE80211_PATH_METRIC_AIRTIME = 1, - IEEE80211_PATH_METRIC_VENDOR = 255, -}; - -/** - * enum ieee80211_root_mode_identifier - root mesh STA mode identifier - * - * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode - * - * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default) - * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than - * this value - * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports - * the proactive PREQ with proactive PREP subfield set to 0 - * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA - * supports the proactive PREQ with proactive PREP subfield set to 1 - * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports - * the proactive RANN - */ -enum ieee80211_root_mode_identifier { - IEEE80211_ROOTMODE_NO_ROOT = 0, - IEEE80211_ROOTMODE_ROOT = 1, - IEEE80211_PROACTIVE_PREQ_NO_PREP = 2, - IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3, - IEEE80211_PROACTIVE_RANN = 4, -}; - /* * IEEE 802.11-2007 7.3.2.9 Country information element * @@ -6098,4 +5889,6 @@ static inline u32 ieee80211_eml_trans_timeout_in_us(u16 eml_cap) #define NAN_DEV_CAPA_NDPE_SUPPORTED 0x08 #define NAN_DEV_CAPA_S3_SUPPORTED 0x10 +#include "ieee80211-mesh.h" + #endif /* LINUX_IEEE80211_H */ -- cgit v1.2.3 From fdc1c141f3ef4dc94e3880e973061681843f62c0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 5 Nov 2025 15:36:50 +0100 Subject: wifi: ieee80211: split HT definitions out The ieee80211.h file has gotten very long, continue splitting it by putting HT definitions into a separate file. Link: https://patch.msgid.link/20251105153843.7532471178d0.Id956a5433ad8658e4e5c0272dbcbb59587206142@changeid Signed-off-by: Johannes Berg --- include/linux/ieee80211-ht.h | 292 +++++++++++++++++++++++++++++++++++++++++++ include/linux/ieee80211.h | 272 +--------------------------------------- 2 files changed, 293 insertions(+), 271 deletions(-) create mode 100644 include/linux/ieee80211-ht.h (limited to 'include/linux') diff --git a/include/linux/ieee80211-ht.h b/include/linux/ieee80211-ht.h new file mode 100644 index 000000000000..21bbf470540f --- /dev/null +++ b/include/linux/ieee80211-ht.h @@ -0,0 +1,292 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * IEEE 802.11 HT definitions + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * + * Copyright (c) 2002-2003, Jouni Malinen + * Copyright (c) 2005, Devicescape Software, Inc. + * Copyright (c) 2006, Michael Wu + * Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright (c) 2016 - 2017 Intel Deutschland GmbH + * Copyright (c) 2018 - 2025 Intel Corporation + */ + +#ifndef LINUX_IEEE80211_HT_H +#define LINUX_IEEE80211_HT_H + +#include +#include + +/* Maximal size of an A-MSDU that can be transported in a HT BA session */ +#define IEEE80211_MAX_MPDU_LEN_HT_BA 4095 + +/* Maximal size of an A-MSDU */ +#define IEEE80211_MAX_MPDU_LEN_HT_3839 3839 +#define IEEE80211_MAX_MPDU_LEN_HT_7935 7935 + +#define IEEE80211_HT_CTL_LEN 4 + +enum ieee80211_ht_chanwidth_values { + IEEE80211_HT_CHANWIDTH_20MHZ = 0, + IEEE80211_HT_CHANWIDTH_ANY = 1, +}; + +/** + * struct ieee80211_bar - Block Ack Request frame format + * @frame_control: Frame Control + * @duration: Duration + * @ra: RA + * @ta: TA + * @control: BAR Control + * @start_seq_num: Starting Sequence Number (see Figure 9-37) + * + * This structure represents the "BlockAckReq frame format" + * as described in IEEE Std 802.11-2020 section 9.3.1.7. +*/ +struct ieee80211_bar { + __le16 frame_control; + __le16 duration; + __u8 ra[ETH_ALEN]; + __u8 ta[ETH_ALEN]; + __le16 control; + __le16 start_seq_num; +} __packed; + +/* 802.11 BAR control masks */ +#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 +#define IEEE80211_BAR_CTRL_MULTI_TID 0x0002 +#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 +#define IEEE80211_BAR_CTRL_TID_INFO_MASK 0xf000 +#define IEEE80211_BAR_CTRL_TID_INFO_SHIFT 12 + +#define IEEE80211_HT_MCS_MASK_LEN 10 + +/** + * struct ieee80211_mcs_info - Supported MCS Set field + * @rx_mask: RX mask + * @rx_highest: highest supported RX rate. If set represents + * the highest supported RX data rate in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest RX data rate supported. + * @tx_params: TX parameters + * @reserved: Reserved bits + * + * This structure represents the "Supported MCS Set field" as + * described in IEEE Std 802.11-2020 section 9.4.2.55.4. + */ +struct ieee80211_mcs_info { + u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN]; + __le16 rx_highest; + u8 tx_params; + u8 reserved[3]; +} __packed; + +/* 802.11n HT capability MSC set */ +#define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff +#define IEEE80211_HT_MCS_TX_DEFINED 0x01 +#define IEEE80211_HT_MCS_TX_RX_DIFF 0x02 +/* value 0 == 1 stream etc */ +#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK 0x0C +#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT 2 +#define IEEE80211_HT_MCS_TX_MAX_STREAMS 4 +#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION 0x10 + +#define IEEE80211_HT_MCS_CHAINS(mcs) ((mcs) == 32 ? 1 : (1 + ((mcs) >> 3))) + +/* + * 802.11n D5.0 20.3.5 / 20.6 says: + * - indices 0 to 7 and 32 are single spatial stream + * - 8 to 31 are multiple spatial streams using equal modulation + * [8..15 for two streams, 16..23 for three and 24..31 for four] + * - remainder are multiple spatial streams using unequal modulation + */ +#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33 +#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \ + (IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8) + +/** + * struct ieee80211_ht_cap - HT capabilities element + * @cap_info: HT Capability Information + * @ampdu_params_info: A-MPDU Parameters + * @mcs: Supported MCS Set + * @extended_ht_cap_info: HT Extended Capabilities + * @tx_BF_cap_info: Transmit Beamforming Capabilities + * @antenna_selection_info: ASEL Capability + * + * This structure represents the payload of the "HT Capabilities + * element" as described in IEEE Std 802.11-2020 section 9.4.2.55. + */ +struct ieee80211_ht_cap { + __le16 cap_info; + u8 ampdu_params_info; + + /* 16 bytes MCS information */ + struct ieee80211_mcs_info mcs; + + __le16 extended_ht_cap_info; + __le32 tx_BF_cap_info; + u8 antenna_selection_info; +} __packed; + +/* 802.11n HT capabilities masks (for cap_info) */ +#define IEEE80211_HT_CAP_LDPC_CODING 0x0001 +#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002 +#define IEEE80211_HT_CAP_SM_PS 0x000C +#define IEEE80211_HT_CAP_SM_PS_SHIFT 2 +#define IEEE80211_HT_CAP_GRN_FLD 0x0010 +#define IEEE80211_HT_CAP_SGI_20 0x0020 +#define IEEE80211_HT_CAP_SGI_40 0x0040 +#define IEEE80211_HT_CAP_TX_STBC 0x0080 +#define IEEE80211_HT_CAP_RX_STBC 0x0300 +#define IEEE80211_HT_CAP_RX_STBC_SHIFT 8 +#define IEEE80211_HT_CAP_DELAY_BA 0x0400 +#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 +#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 +#define IEEE80211_HT_CAP_RESERVED 0x2000 +#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000 +#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000 + +/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */ +#define IEEE80211_HT_EXT_CAP_PCO 0x0001 +#define IEEE80211_HT_EXT_CAP_PCO_TIME 0x0006 +#define IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT 1 +#define IEEE80211_HT_EXT_CAP_MCS_FB 0x0300 +#define IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT 8 +#define IEEE80211_HT_EXT_CAP_HTC_SUP 0x0400 +#define IEEE80211_HT_EXT_CAP_RD_RESPONDER 0x0800 + +/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */ +#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 +#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C +#define IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT 2 + +/* + * Maximum length of AMPDU that the STA can receive in high-throughput (HT). + * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets) + */ +enum ieee80211_max_ampdu_length_exp { + IEEE80211_HT_MAX_AMPDU_8K = 0, + IEEE80211_HT_MAX_AMPDU_16K = 1, + IEEE80211_HT_MAX_AMPDU_32K = 2, + IEEE80211_HT_MAX_AMPDU_64K = 3 +}; + +#define IEEE80211_HT_MAX_AMPDU_FACTOR 13 + +/* Minimum MPDU start spacing */ +enum ieee80211_min_mpdu_spacing { + IEEE80211_HT_MPDU_DENSITY_NONE = 0, /* No restriction */ + IEEE80211_HT_MPDU_DENSITY_0_25 = 1, /* 1/4 usec */ + IEEE80211_HT_MPDU_DENSITY_0_5 = 2, /* 1/2 usec */ + IEEE80211_HT_MPDU_DENSITY_1 = 3, /* 1 usec */ + IEEE80211_HT_MPDU_DENSITY_2 = 4, /* 2 usec */ + IEEE80211_HT_MPDU_DENSITY_4 = 5, /* 4 usec */ + IEEE80211_HT_MPDU_DENSITY_8 = 6, /* 8 usec */ + IEEE80211_HT_MPDU_DENSITY_16 = 7 /* 16 usec */ +}; + +/** + * struct ieee80211_ht_operation - HT operation IE + * @primary_chan: Primary Channel + * @ht_param: HT Operation Information parameters + * @operation_mode: HT Operation Information operation mode + * @stbc_param: HT Operation Information STBC params + * @basic_set: Basic HT-MCS Set + * + * This structure represents the payload of the "HT Operation + * element" as described in IEEE Std 802.11-2020 section 9.4.2.56. + */ +struct ieee80211_ht_operation { + u8 primary_chan; + u8 ht_param; + __le16 operation_mode; + __le16 stbc_param; + u8 basic_set[16]; +} __packed; + +/* for ht_param */ +#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03 +#define IEEE80211_HT_PARAM_CHA_SEC_NONE 0x00 +#define IEEE80211_HT_PARAM_CHA_SEC_ABOVE 0x01 +#define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03 +#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04 +#define IEEE80211_HT_PARAM_RIFS_MODE 0x08 + +/* for operation_mode */ +#define IEEE80211_HT_OP_MODE_PROTECTION 0x0003 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONE 0 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER 1 +#define IEEE80211_HT_OP_MODE_PROTECTION_20MHZ 2 +#define IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED 3 +#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT 0x0004 +#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT 0x0010 +#define IEEE80211_HT_OP_MODE_CCFS2_SHIFT 5 +#define IEEE80211_HT_OP_MODE_CCFS2_MASK 0x1fe0 + +/* for stbc_param */ +#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON 0x0040 +#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT 0x0080 +#define IEEE80211_HT_STBC_PARAM_STBC_BEACON 0x0100 +#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT 0x0200 +#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE 0x0400 +#define IEEE80211_HT_STBC_PARAM_PCO_PHASE 0x0800 + + +/* block-ack parameters */ +#define IEEE80211_ADDBA_PARAM_AMSDU_MASK 0x0001 +#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002 +#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C +#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0 +#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000 +#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800 + +/* + * A-MPDU buffer sizes + * According to HT size varies from 8 to 64 frames + * HE adds the ability to have up to 256 frames. + * EHT adds the ability to have up to 1K frames. + */ +#define IEEE80211_MIN_AMPDU_BUF 0x8 +#define IEEE80211_MAX_AMPDU_BUF_HT 0x40 +#define IEEE80211_MAX_AMPDU_BUF_HE 0x100 +#define IEEE80211_MAX_AMPDU_BUF_EHT 0x400 + + +/* Spatial Multiplexing Power Save Modes (for capability) */ +#define WLAN_HT_CAP_SM_PS_STATIC 0 +#define WLAN_HT_CAP_SM_PS_DYNAMIC 1 +#define WLAN_HT_CAP_SM_PS_INVALID 2 +#define WLAN_HT_CAP_SM_PS_DISABLED 3 + +/* for SM power control field lower two bits */ +#define WLAN_HT_SMPS_CONTROL_DISABLED 0 +#define WLAN_HT_SMPS_CONTROL_STATIC 1 +#define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 + +/* HT action codes */ +enum ieee80211_ht_actioncode { + WLAN_HT_ACTION_NOTIFY_CHANWIDTH = 0, + WLAN_HT_ACTION_SMPS = 1, + WLAN_HT_ACTION_PSMP = 2, + WLAN_HT_ACTION_PCO_PHASE = 3, + WLAN_HT_ACTION_CSI = 4, + WLAN_HT_ACTION_NONCOMPRESSED_BF = 5, + WLAN_HT_ACTION_COMPRESSED_BF = 6, + WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7, +}; + +/* BACK action code */ +enum ieee80211_back_actioncode { + WLAN_ACTION_ADDBA_REQ = 0, + WLAN_ACTION_ADDBA_RESP = 1, + WLAN_ACTION_DELBA = 2, +}; + +/* BACK (block-ack) parties */ +enum ieee80211_back_parties { + WLAN_BACK_RECIPIENT = 0, + WLAN_BACK_INITIATOR = 1, +}; + +#endif /* LINUX_IEEE80211_HT_H */ diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index fe78b150ab45..0a9b4a8025cd 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -239,13 +239,6 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2) /* 30 byte 4 addr hdr, 2 byte QoS, 2304 byte MSDU, 12 byte crypt, 4 byte FCS */ #define IEEE80211_MAX_FRAME_LEN 2352 -/* Maximal size of an A-MSDU that can be transported in a HT BA session */ -#define IEEE80211_MAX_MPDU_LEN_HT_BA 4095 - -/* Maximal size of an A-MSDU */ -#define IEEE80211_MAX_MPDU_LEN_HT_3839 3839 -#define IEEE80211_MAX_MPDU_LEN_HT_7935 7935 - #define IEEE80211_MAX_MPDU_LEN_VHT_3895 3895 #define IEEE80211_MAX_MPDU_LEN_VHT_7991 7991 #define IEEE80211_MAX_MPDU_LEN_VHT_11454 11454 @@ -302,8 +295,6 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2) #define IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK 0x03 #define IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT 5 -#define IEEE80211_HT_CTL_LEN 4 - /* trigger type within common_info of trigger frame */ #define IEEE80211_TRIGGER_TYPE_MASK 0xf #define IEEE80211_TRIGGER_TYPE_BASIC 0x0 @@ -997,11 +988,6 @@ struct ieee80211_tim_ie { }; } __packed; -enum ieee80211_ht_chanwidth_values { - IEEE80211_HT_CHANWIDTH_20MHZ = 0, - IEEE80211_HT_CHANWIDTH_ANY = 1, -}; - /** * enum ieee80211_vht_opmode_bits - VHT operating mode field bits * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK: channel width mask @@ -1677,146 +1663,6 @@ struct ieee80211_p2p_noa_attr { #define IEEE80211_P2P_OPPPS_ENABLE_BIT BIT(7) #define IEEE80211_P2P_OPPPS_CTWINDOW_MASK 0x7F -/** - * struct ieee80211_bar - Block Ack Request frame format - * @frame_control: Frame Control - * @duration: Duration - * @ra: RA - * @ta: TA - * @control: BAR Control - * @start_seq_num: Starting Sequence Number (see Figure 9-37) - * - * This structure represents the "BlockAckReq frame format" - * as described in IEEE Std 802.11-2020 section 9.3.1.7. -*/ -struct ieee80211_bar { - __le16 frame_control; - __le16 duration; - __u8 ra[ETH_ALEN]; - __u8 ta[ETH_ALEN]; - __le16 control; - __le16 start_seq_num; -} __packed; - -/* 802.11 BAR control masks */ -#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 -#define IEEE80211_BAR_CTRL_MULTI_TID 0x0002 -#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 -#define IEEE80211_BAR_CTRL_TID_INFO_MASK 0xf000 -#define IEEE80211_BAR_CTRL_TID_INFO_SHIFT 12 - -#define IEEE80211_HT_MCS_MASK_LEN 10 - -/** - * struct ieee80211_mcs_info - Supported MCS Set field - * @rx_mask: RX mask - * @rx_highest: highest supported RX rate. If set represents - * the highest supported RX data rate in units of 1 Mbps. - * If this field is 0 this value should not be used to - * consider the highest RX data rate supported. - * @tx_params: TX parameters - * @reserved: Reserved bits - * - * This structure represents the "Supported MCS Set field" as - * described in IEEE Std 802.11-2020 section 9.4.2.55.4. - */ -struct ieee80211_mcs_info { - u8 rx_mask[IEEE80211_HT_MCS_MASK_LEN]; - __le16 rx_highest; - u8 tx_params; - u8 reserved[3]; -} __packed; - -/* 802.11n HT capability MSC set */ -#define IEEE80211_HT_MCS_RX_HIGHEST_MASK 0x3ff -#define IEEE80211_HT_MCS_TX_DEFINED 0x01 -#define IEEE80211_HT_MCS_TX_RX_DIFF 0x02 -/* value 0 == 1 stream etc */ -#define IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK 0x0C -#define IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT 2 -#define IEEE80211_HT_MCS_TX_MAX_STREAMS 4 -#define IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION 0x10 - -#define IEEE80211_HT_MCS_CHAINS(mcs) ((mcs) == 32 ? 1 : (1 + ((mcs) >> 3))) - -/* - * 802.11n D5.0 20.3.5 / 20.6 says: - * - indices 0 to 7 and 32 are single spatial stream - * - 8 to 31 are multiple spatial streams using equal modulation - * [8..15 for two streams, 16..23 for three and 24..31 for four] - * - remainder are multiple spatial streams using unequal modulation - */ -#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START 33 -#define IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE \ - (IEEE80211_HT_MCS_UNEQUAL_MODULATION_START / 8) - -/** - * struct ieee80211_ht_cap - HT capabilities element - * @cap_info: HT Capability Information - * @ampdu_params_info: A-MPDU Parameters - * @mcs: Supported MCS Set - * @extended_ht_cap_info: HT Extended Capabilities - * @tx_BF_cap_info: Transmit Beamforming Capabilities - * @antenna_selection_info: ASEL Capability - * - * This structure represents the payload of the "HT Capabilities - * element" as described in IEEE Std 802.11-2020 section 9.4.2.55. - */ -struct ieee80211_ht_cap { - __le16 cap_info; - u8 ampdu_params_info; - - /* 16 bytes MCS information */ - struct ieee80211_mcs_info mcs; - - __le16 extended_ht_cap_info; - __le32 tx_BF_cap_info; - u8 antenna_selection_info; -} __packed; - -/* 802.11n HT capabilities masks (for cap_info) */ -#define IEEE80211_HT_CAP_LDPC_CODING 0x0001 -#define IEEE80211_HT_CAP_SUP_WIDTH_20_40 0x0002 -#define IEEE80211_HT_CAP_SM_PS 0x000C -#define IEEE80211_HT_CAP_SM_PS_SHIFT 2 -#define IEEE80211_HT_CAP_GRN_FLD 0x0010 -#define IEEE80211_HT_CAP_SGI_20 0x0020 -#define IEEE80211_HT_CAP_SGI_40 0x0040 -#define IEEE80211_HT_CAP_TX_STBC 0x0080 -#define IEEE80211_HT_CAP_RX_STBC 0x0300 -#define IEEE80211_HT_CAP_RX_STBC_SHIFT 8 -#define IEEE80211_HT_CAP_DELAY_BA 0x0400 -#define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 -#define IEEE80211_HT_CAP_DSSSCCK40 0x1000 -#define IEEE80211_HT_CAP_RESERVED 0x2000 -#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000 -#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000 - -/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */ -#define IEEE80211_HT_EXT_CAP_PCO 0x0001 -#define IEEE80211_HT_EXT_CAP_PCO_TIME 0x0006 -#define IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT 1 -#define IEEE80211_HT_EXT_CAP_MCS_FB 0x0300 -#define IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT 8 -#define IEEE80211_HT_EXT_CAP_HTC_SUP 0x0400 -#define IEEE80211_HT_EXT_CAP_RD_RESPONDER 0x0800 - -/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */ -#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03 -#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C -#define IEEE80211_HT_AMPDU_PARM_DENSITY_SHIFT 2 - -/* - * Maximum length of AMPDU that the STA can receive in high-throughput (HT). - * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets) - */ -enum ieee80211_max_ampdu_length_exp { - IEEE80211_HT_MAX_AMPDU_8K = 0, - IEEE80211_HT_MAX_AMPDU_16K = 1, - IEEE80211_HT_MAX_AMPDU_32K = 2, - IEEE80211_HT_MAX_AMPDU_64K = 3 -}; - /* * Maximum length of AMPDU that the STA can receive in VHT. * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets) @@ -1832,98 +1678,6 @@ enum ieee80211_vht_max_ampdu_length_exp { IEEE80211_VHT_MAX_AMPDU_1024K = 7 }; -#define IEEE80211_HT_MAX_AMPDU_FACTOR 13 - -/* Minimum MPDU start spacing */ -enum ieee80211_min_mpdu_spacing { - IEEE80211_HT_MPDU_DENSITY_NONE = 0, /* No restriction */ - IEEE80211_HT_MPDU_DENSITY_0_25 = 1, /* 1/4 usec */ - IEEE80211_HT_MPDU_DENSITY_0_5 = 2, /* 1/2 usec */ - IEEE80211_HT_MPDU_DENSITY_1 = 3, /* 1 usec */ - IEEE80211_HT_MPDU_DENSITY_2 = 4, /* 2 usec */ - IEEE80211_HT_MPDU_DENSITY_4 = 5, /* 4 usec */ - IEEE80211_HT_MPDU_DENSITY_8 = 6, /* 8 usec */ - IEEE80211_HT_MPDU_DENSITY_16 = 7 /* 16 usec */ -}; - -/** - * struct ieee80211_ht_operation - HT operation IE - * @primary_chan: Primary Channel - * @ht_param: HT Operation Information parameters - * @operation_mode: HT Operation Information operation mode - * @stbc_param: HT Operation Information STBC params - * @basic_set: Basic HT-MCS Set - * - * This structure represents the payload of the "HT Operation - * element" as described in IEEE Std 802.11-2020 section 9.4.2.56. - */ -struct ieee80211_ht_operation { - u8 primary_chan; - u8 ht_param; - __le16 operation_mode; - __le16 stbc_param; - u8 basic_set[16]; -} __packed; - -/* for ht_param */ -#define IEEE80211_HT_PARAM_CHA_SEC_OFFSET 0x03 -#define IEEE80211_HT_PARAM_CHA_SEC_NONE 0x00 -#define IEEE80211_HT_PARAM_CHA_SEC_ABOVE 0x01 -#define IEEE80211_HT_PARAM_CHA_SEC_BELOW 0x03 -#define IEEE80211_HT_PARAM_CHAN_WIDTH_ANY 0x04 -#define IEEE80211_HT_PARAM_RIFS_MODE 0x08 - -/* for operation_mode */ -#define IEEE80211_HT_OP_MODE_PROTECTION 0x0003 -#define IEEE80211_HT_OP_MODE_PROTECTION_NONE 0 -#define IEEE80211_HT_OP_MODE_PROTECTION_NONMEMBER 1 -#define IEEE80211_HT_OP_MODE_PROTECTION_20MHZ 2 -#define IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED 3 -#define IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT 0x0004 -#define IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT 0x0010 -#define IEEE80211_HT_OP_MODE_CCFS2_SHIFT 5 -#define IEEE80211_HT_OP_MODE_CCFS2_MASK 0x1fe0 - -/* for stbc_param */ -#define IEEE80211_HT_STBC_PARAM_DUAL_BEACON 0x0040 -#define IEEE80211_HT_STBC_PARAM_DUAL_CTS_PROT 0x0080 -#define IEEE80211_HT_STBC_PARAM_STBC_BEACON 0x0100 -#define IEEE80211_HT_STBC_PARAM_LSIG_TXOP_FULLPROT 0x0200 -#define IEEE80211_HT_STBC_PARAM_PCO_ACTIVE 0x0400 -#define IEEE80211_HT_STBC_PARAM_PCO_PHASE 0x0800 - - -/* block-ack parameters */ -#define IEEE80211_ADDBA_PARAM_AMSDU_MASK 0x0001 -#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002 -#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C -#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0 -#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000 -#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800 - -/* - * A-MPDU buffer sizes - * According to HT size varies from 8 to 64 frames - * HE adds the ability to have up to 256 frames. - * EHT adds the ability to have up to 1K frames. - */ -#define IEEE80211_MIN_AMPDU_BUF 0x8 -#define IEEE80211_MAX_AMPDU_BUF_HT 0x40 -#define IEEE80211_MAX_AMPDU_BUF_HE 0x100 -#define IEEE80211_MAX_AMPDU_BUF_EHT 0x400 - - -/* Spatial Multiplexing Power Save Modes (for capability) */ -#define WLAN_HT_CAP_SM_PS_STATIC 0 -#define WLAN_HT_CAP_SM_PS_DYNAMIC 1 -#define WLAN_HT_CAP_SM_PS_INVALID 2 -#define WLAN_HT_CAP_SM_PS_DISABLED 3 - -/* for SM power control field lower two bits */ -#define WLAN_HT_SMPS_CONTROL_DISABLED 0 -#define WLAN_HT_SMPS_CONTROL_STATIC 1 -#define WLAN_HT_SMPS_CONTROL_DYNAMIC 3 - /** * struct ieee80211_vht_mcs_info - VHT MCS information * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams @@ -3807,18 +3561,6 @@ enum ieee80211_spectrum_mgmt_actioncode { WLAN_ACTION_SPCT_CHL_SWITCH = 4, }; -/* HT action codes */ -enum ieee80211_ht_actioncode { - WLAN_HT_ACTION_NOTIFY_CHANWIDTH = 0, - WLAN_HT_ACTION_SMPS = 1, - WLAN_HT_ACTION_PSMP = 2, - WLAN_HT_ACTION_PCO_PHASE = 3, - WLAN_HT_ACTION_CSI = 4, - WLAN_HT_ACTION_NONCOMPRESSED_BF = 5, - WLAN_HT_ACTION_COMPRESSED_BF = 6, - WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7, -}; - /* VHT action codes */ enum ieee80211_vht_actioncode { WLAN_VHT_ACTION_COMPRESSED_BF = 0, @@ -4155,19 +3897,6 @@ struct ieee80211_bss_max_idle_period_ie { u8 idle_options; } __packed; -/* BACK action code */ -enum ieee80211_back_actioncode { - WLAN_ACTION_ADDBA_REQ = 0, - WLAN_ACTION_ADDBA_RESP = 1, - WLAN_ACTION_DELBA = 2, -}; - -/* BACK (block-ack) parties */ -enum ieee80211_back_parties { - WLAN_BACK_RECIPIENT = 0, - WLAN_BACK_INITIATOR = 1, -}; - /* SA Query action */ enum ieee80211_sa_query_action { WLAN_ACTION_SA_QUERY_REQUEST = 0, @@ -5889,6 +5618,7 @@ static inline u32 ieee80211_eml_trans_timeout_in_us(u16 eml_cap) #define NAN_DEV_CAPA_NDPE_SUPPORTED 0x08 #define NAN_DEV_CAPA_S3_SUPPORTED 0x10 +#include "ieee80211-ht.h" #include "ieee80211-mesh.h" #endif /* LINUX_IEEE80211_H */ -- cgit v1.2.3 From 7cb14da1d7bbfa4a6417ed7f1bc07dd77bcd9c83 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 5 Nov 2025 15:36:51 +0100 Subject: wifi: ieee80211: split VHT definitions out The ieee80211.h file has gotten very long, continue splitting it by putting VHT definitions into a separate file. Link: https://patch.msgid.link/20251105153843.c31cb771a250.I787a13064db7d80440101de3445be17881daf1b6@changeid Signed-off-by: Johannes Berg --- include/linux/ieee80211-vht.h | 236 ++++++++++++++++++++++++++++++++++++++++++ include/linux/ieee80211.h | 216 +------------------------------------- 2 files changed, 237 insertions(+), 215 deletions(-) create mode 100644 include/linux/ieee80211-vht.h (limited to 'include/linux') diff --git a/include/linux/ieee80211-vht.h b/include/linux/ieee80211-vht.h new file mode 100644 index 000000000000..898dfb561fef --- /dev/null +++ b/include/linux/ieee80211-vht.h @@ -0,0 +1,236 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * IEEE 802.11 VHT definitions + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * + * Copyright (c) 2002-2003, Jouni Malinen + * Copyright (c) 2005, Devicescape Software, Inc. + * Copyright (c) 2006, Michael Wu + * Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright (c) 2016 - 2017 Intel Deutschland GmbH + * Copyright (c) 2018 - 2025 Intel Corporation + */ + +#ifndef LINUX_IEEE80211_VHT_H +#define LINUX_IEEE80211_VHT_H + +#include +#include + +#define IEEE80211_MAX_MPDU_LEN_VHT_3895 3895 +#define IEEE80211_MAX_MPDU_LEN_VHT_7991 7991 +#define IEEE80211_MAX_MPDU_LEN_VHT_11454 11454 + +/** + * enum ieee80211_vht_opmode_bits - VHT operating mode field bits + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK: channel width mask + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: 20 MHz channel width + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: 40 MHz channel width + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: 80 MHz channel width + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: 160 MHz or 80+80 MHz channel width + * @IEEE80211_OPMODE_NOTIF_BW_160_80P80: 160 / 80+80 MHz indicator flag + * @IEEE80211_OPMODE_NOTIF_RX_NSS_MASK: number of spatial streams mask + * (the NSS value is the value of this field + 1) + * @IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT: number of spatial streams shift + * @IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF: indicates streams in SU-MIMO PPDU + * using a beamforming steering matrix + */ +enum ieee80211_vht_opmode_bits { + IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK = 0x03, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ = 0, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ = 1, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ = 2, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ = 3, + IEEE80211_OPMODE_NOTIF_BW_160_80P80 = 0x04, + IEEE80211_OPMODE_NOTIF_RX_NSS_MASK = 0x70, + IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT = 4, + IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF = 0x80, +}; + +/* + * Maximum length of AMPDU that the STA can receive in VHT. + * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets) + */ +enum ieee80211_vht_max_ampdu_length_exp { + IEEE80211_VHT_MAX_AMPDU_8K = 0, + IEEE80211_VHT_MAX_AMPDU_16K = 1, + IEEE80211_VHT_MAX_AMPDU_32K = 2, + IEEE80211_VHT_MAX_AMPDU_64K = 3, + IEEE80211_VHT_MAX_AMPDU_128K = 4, + IEEE80211_VHT_MAX_AMPDU_256K = 5, + IEEE80211_VHT_MAX_AMPDU_512K = 6, + IEEE80211_VHT_MAX_AMPDU_1024K = 7 +}; + +/** + * struct ieee80211_vht_mcs_info - VHT MCS information + * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams + * @rx_highest: Indicates highest long GI VHT PPDU data rate + * STA can receive. Rate expressed in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest RX data rate supported. + * The top 3 bits of this field indicate the Maximum NSTS,total + * (a beamformee capability.) + * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams + * @tx_highest: Indicates highest long GI VHT PPDU data rate + * STA can transmit. Rate expressed in units of 1 Mbps. + * If this field is 0 this value should not be used to + * consider the highest TX data rate supported. + * The top 2 bits of this field are reserved, the + * 3rd bit from the top indiciates VHT Extended NSS BW + * Capability. + */ +struct ieee80211_vht_mcs_info { + __le16 rx_mcs_map; + __le16 rx_highest; + __le16 tx_mcs_map; + __le16 tx_highest; +} __packed; + +/* for rx_highest */ +#define IEEE80211_VHT_MAX_NSTS_TOTAL_SHIFT 13 +#define IEEE80211_VHT_MAX_NSTS_TOTAL_MASK (7 << IEEE80211_VHT_MAX_NSTS_TOTAL_SHIFT) + +/* for tx_highest */ +#define IEEE80211_VHT_EXT_NSS_BW_CAPABLE (1 << 13) + +/** + * enum ieee80211_vht_mcs_support - VHT MCS support definitions + * @IEEE80211_VHT_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the + * number of streams + * @IEEE80211_VHT_MCS_SUPPORT_0_8: MCSes 0-8 are supported + * @IEEE80211_VHT_MCS_SUPPORT_0_9: MCSes 0-9 are supported + * @IEEE80211_VHT_MCS_NOT_SUPPORTED: This number of streams isn't supported + * + * These definitions are used in each 2-bit subfield of the @rx_mcs_map + * and @tx_mcs_map fields of &struct ieee80211_vht_mcs_info, which are + * both split into 8 subfields by number of streams. These values indicate + * which MCSes are supported for the number of streams the value appears + * for. + */ +enum ieee80211_vht_mcs_support { + IEEE80211_VHT_MCS_SUPPORT_0_7 = 0, + IEEE80211_VHT_MCS_SUPPORT_0_8 = 1, + IEEE80211_VHT_MCS_SUPPORT_0_9 = 2, + IEEE80211_VHT_MCS_NOT_SUPPORTED = 3, +}; + +/** + * struct ieee80211_vht_cap - VHT capabilities + * + * This structure is the "VHT capabilities element" as + * described in 802.11ac D3.0 8.4.2.160 + * @vht_cap_info: VHT capability info + * @supp_mcs: VHT MCS supported rates + */ +struct ieee80211_vht_cap { + __le32 vht_cap_info; + struct ieee80211_vht_mcs_info supp_mcs; +} __packed; + +/** + * enum ieee80211_vht_chanwidth - VHT channel width + * @IEEE80211_VHT_CHANWIDTH_USE_HT: use the HT operation IE to + * determine the channel width (20 or 40 MHz) + * @IEEE80211_VHT_CHANWIDTH_80MHZ: 80 MHz bandwidth + * @IEEE80211_VHT_CHANWIDTH_160MHZ: 160 MHz bandwidth + * @IEEE80211_VHT_CHANWIDTH_80P80MHZ: 80+80 MHz bandwidth + */ +enum ieee80211_vht_chanwidth { + IEEE80211_VHT_CHANWIDTH_USE_HT = 0, + IEEE80211_VHT_CHANWIDTH_80MHZ = 1, + IEEE80211_VHT_CHANWIDTH_160MHZ = 2, + IEEE80211_VHT_CHANWIDTH_80P80MHZ = 3, +}; + +/** + * struct ieee80211_vht_operation - VHT operation IE + * + * This structure is the "VHT operation element" as + * described in 802.11ac D3.0 8.4.2.161 + * @chan_width: Operating channel width + * @center_freq_seg0_idx: center freq segment 0 index + * @center_freq_seg1_idx: center freq segment 1 index + * @basic_mcs_set: VHT Basic MCS rate set + */ +struct ieee80211_vht_operation { + u8 chan_width; + u8 center_freq_seg0_idx; + u8 center_freq_seg1_idx; + __le16 basic_mcs_set; +} __packed; + +/* 802.11ac VHT Capabilities */ +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001 +#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 +#define IEEE80211_VHT_CAP_MAX_MPDU_MASK 0x00000003 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK 0x0000000C +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_SHIFT 2 +#define IEEE80211_VHT_CAP_RXLDPC 0x00000010 +#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 +#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 +#define IEEE80211_VHT_CAP_TXSTBC 0x00000080 +#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100 +#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200 +#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 +#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 +#define IEEE80211_VHT_CAP_RXSTBC_MASK 0x00000700 +#define IEEE80211_VHT_CAP_RXSTBC_SHIFT 8 +#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 +#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 +#define IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT 13 +#define IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK \ + (7 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT) +#define IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT 16 +#define IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK \ + (7 << IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT) +#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 +#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 +#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 +#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000 +#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT 23 +#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK \ + (7 << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT) +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000 +#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000 +#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 +#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 +#define IEEE80211_VHT_CAP_EXT_NSS_BW_SHIFT 30 +#define IEEE80211_VHT_CAP_EXT_NSS_BW_MASK 0xc0000000 + +/** + * ieee80211_get_vht_max_nss - return max NSS for a given bandwidth/MCS + * @cap: VHT capabilities of the peer + * @bw: bandwidth to use + * @mcs: MCS index to use + * @ext_nss_bw_capable: indicates whether or not the local transmitter + * (rate scaling algorithm) can deal with the new logic + * (dot11VHTExtendedNSSBWCapable) + * @max_vht_nss: current maximum NSS as advertised by the STA in + * operating mode notification, can be 0 in which case the + * capability data will be used to derive this (from MCS support) + * Return: The maximum NSS that can be used for the given bandwidth/MCS + * combination + * + * Due to the VHT Extended NSS Bandwidth Support, the maximum NSS can + * vary for a given BW/MCS. This function parses the data. + * + * Note: This function is exported by cfg80211. + */ +int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap, + enum ieee80211_vht_chanwidth bw, + int mcs, bool ext_nss_bw_capable, + unsigned int max_vht_nss); + +/* VHT action codes */ +enum ieee80211_vht_actioncode { + WLAN_VHT_ACTION_COMPRESSED_BF = 0, + WLAN_VHT_ACTION_GROUPID_MGMT = 1, + WLAN_VHT_ACTION_OPMODE_NOTIF = 2, +}; + +#endif /* LINUX_IEEE80211_VHT_H */ diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 0a9b4a8025cd..0b247b28c661 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -239,10 +239,6 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2) /* 30 byte 4 addr hdr, 2 byte QoS, 2304 byte MSDU, 12 byte crypt, 4 byte FCS */ #define IEEE80211_MAX_FRAME_LEN 2352 -#define IEEE80211_MAX_MPDU_LEN_VHT_3895 3895 -#define IEEE80211_MAX_MPDU_LEN_VHT_7991 7991 -#define IEEE80211_MAX_MPDU_LEN_VHT_11454 11454 - #define IEEE80211_MAX_SSID_LEN 32 #define IEEE80211_FIRST_TSPEC_TSID 8 @@ -988,32 +984,6 @@ struct ieee80211_tim_ie { }; } __packed; -/** - * enum ieee80211_vht_opmode_bits - VHT operating mode field bits - * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK: channel width mask - * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: 20 MHz channel width - * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: 40 MHz channel width - * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: 80 MHz channel width - * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: 160 MHz or 80+80 MHz channel width - * @IEEE80211_OPMODE_NOTIF_BW_160_80P80: 160 / 80+80 MHz indicator flag - * @IEEE80211_OPMODE_NOTIF_RX_NSS_MASK: number of spatial streams mask - * (the NSS value is the value of this field + 1) - * @IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT: number of spatial streams shift - * @IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF: indicates streams in SU-MIMO PPDU - * using a beamforming steering matrix - */ -enum ieee80211_vht_opmode_bits { - IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK = 0x03, - IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ = 0, - IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ = 1, - IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ = 2, - IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ = 3, - IEEE80211_OPMODE_NOTIF_BW_160_80P80 = 0x04, - IEEE80211_OPMODE_NOTIF_RX_NSS_MASK = 0x70, - IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT = 4, - IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF = 0x80, -}; - /** * enum ieee80211_s1g_chanwidth - S1G channel widths * These are defined in IEEE802.11-2016ah Table 10-20 @@ -1663,119 +1633,6 @@ struct ieee80211_p2p_noa_attr { #define IEEE80211_P2P_OPPPS_ENABLE_BIT BIT(7) #define IEEE80211_P2P_OPPPS_CTWINDOW_MASK 0x7F -/* - * Maximum length of AMPDU that the STA can receive in VHT. - * Length = 2 ^ (13 + max_ampdu_length_exp) - 1 (octets) - */ -enum ieee80211_vht_max_ampdu_length_exp { - IEEE80211_VHT_MAX_AMPDU_8K = 0, - IEEE80211_VHT_MAX_AMPDU_16K = 1, - IEEE80211_VHT_MAX_AMPDU_32K = 2, - IEEE80211_VHT_MAX_AMPDU_64K = 3, - IEEE80211_VHT_MAX_AMPDU_128K = 4, - IEEE80211_VHT_MAX_AMPDU_256K = 5, - IEEE80211_VHT_MAX_AMPDU_512K = 6, - IEEE80211_VHT_MAX_AMPDU_1024K = 7 -}; - -/** - * struct ieee80211_vht_mcs_info - VHT MCS information - * @rx_mcs_map: RX MCS map 2 bits for each stream, total 8 streams - * @rx_highest: Indicates highest long GI VHT PPDU data rate - * STA can receive. Rate expressed in units of 1 Mbps. - * If this field is 0 this value should not be used to - * consider the highest RX data rate supported. - * The top 3 bits of this field indicate the Maximum NSTS,total - * (a beamformee capability.) - * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams - * @tx_highest: Indicates highest long GI VHT PPDU data rate - * STA can transmit. Rate expressed in units of 1 Mbps. - * If this field is 0 this value should not be used to - * consider the highest TX data rate supported. - * The top 2 bits of this field are reserved, the - * 3rd bit from the top indiciates VHT Extended NSS BW - * Capability. - */ -struct ieee80211_vht_mcs_info { - __le16 rx_mcs_map; - __le16 rx_highest; - __le16 tx_mcs_map; - __le16 tx_highest; -} __packed; - -/* for rx_highest */ -#define IEEE80211_VHT_MAX_NSTS_TOTAL_SHIFT 13 -#define IEEE80211_VHT_MAX_NSTS_TOTAL_MASK (7 << IEEE80211_VHT_MAX_NSTS_TOTAL_SHIFT) - -/* for tx_highest */ -#define IEEE80211_VHT_EXT_NSS_BW_CAPABLE (1 << 13) - -/** - * enum ieee80211_vht_mcs_support - VHT MCS support definitions - * @IEEE80211_VHT_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the - * number of streams - * @IEEE80211_VHT_MCS_SUPPORT_0_8: MCSes 0-8 are supported - * @IEEE80211_VHT_MCS_SUPPORT_0_9: MCSes 0-9 are supported - * @IEEE80211_VHT_MCS_NOT_SUPPORTED: This number of streams isn't supported - * - * These definitions are used in each 2-bit subfield of the @rx_mcs_map - * and @tx_mcs_map fields of &struct ieee80211_vht_mcs_info, which are - * both split into 8 subfields by number of streams. These values indicate - * which MCSes are supported for the number of streams the value appears - * for. - */ -enum ieee80211_vht_mcs_support { - IEEE80211_VHT_MCS_SUPPORT_0_7 = 0, - IEEE80211_VHT_MCS_SUPPORT_0_8 = 1, - IEEE80211_VHT_MCS_SUPPORT_0_9 = 2, - IEEE80211_VHT_MCS_NOT_SUPPORTED = 3, -}; - -/** - * struct ieee80211_vht_cap - VHT capabilities - * - * This structure is the "VHT capabilities element" as - * described in 802.11ac D3.0 8.4.2.160 - * @vht_cap_info: VHT capability info - * @supp_mcs: VHT MCS supported rates - */ -struct ieee80211_vht_cap { - __le32 vht_cap_info; - struct ieee80211_vht_mcs_info supp_mcs; -} __packed; - -/** - * enum ieee80211_vht_chanwidth - VHT channel width - * @IEEE80211_VHT_CHANWIDTH_USE_HT: use the HT operation IE to - * determine the channel width (20 or 40 MHz) - * @IEEE80211_VHT_CHANWIDTH_80MHZ: 80 MHz bandwidth - * @IEEE80211_VHT_CHANWIDTH_160MHZ: 160 MHz bandwidth - * @IEEE80211_VHT_CHANWIDTH_80P80MHZ: 80+80 MHz bandwidth - */ -enum ieee80211_vht_chanwidth { - IEEE80211_VHT_CHANWIDTH_USE_HT = 0, - IEEE80211_VHT_CHANWIDTH_80MHZ = 1, - IEEE80211_VHT_CHANWIDTH_160MHZ = 2, - IEEE80211_VHT_CHANWIDTH_80P80MHZ = 3, -}; - -/** - * struct ieee80211_vht_operation - VHT operation IE - * - * This structure is the "VHT operation element" as - * described in 802.11ac D3.0 8.4.2.161 - * @chan_width: Operating channel width - * @center_freq_seg0_idx: center freq segment 0 index - * @center_freq_seg1_idx: center freq segment 1 index - * @basic_mcs_set: VHT Basic MCS rate set - */ -struct ieee80211_vht_operation { - u8 chan_width; - u8 center_freq_seg0_idx; - u8 center_freq_seg1_idx; - __le16 basic_mcs_set; -} __packed; - /** * struct ieee80211_he_cap_elem - HE capabilities element * @mac_cap_info: HE MAC Capabilities Information @@ -2045,71 +1902,6 @@ struct ieee80211_eht_operation_info { u8 optional[]; } __packed; -/* 802.11ac VHT Capabilities */ -#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 -#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 0x00000001 -#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 -#define IEEE80211_VHT_CAP_MAX_MPDU_MASK 0x00000003 -#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 -#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 -#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK 0x0000000C -#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_SHIFT 2 -#define IEEE80211_VHT_CAP_RXLDPC 0x00000010 -#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 -#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 -#define IEEE80211_VHT_CAP_TXSTBC 0x00000080 -#define IEEE80211_VHT_CAP_RXSTBC_1 0x00000100 -#define IEEE80211_VHT_CAP_RXSTBC_2 0x00000200 -#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 -#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 -#define IEEE80211_VHT_CAP_RXSTBC_MASK 0x00000700 -#define IEEE80211_VHT_CAP_RXSTBC_SHIFT 8 -#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 -#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 -#define IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT 13 -#define IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK \ - (7 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT) -#define IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT 16 -#define IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_MASK \ - (7 << IEEE80211_VHT_CAP_SOUNDING_DIMENSIONS_SHIFT) -#define IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE 0x00080000 -#define IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE 0x00100000 -#define IEEE80211_VHT_CAP_VHT_TXOP_PS 0x00200000 -#define IEEE80211_VHT_CAP_HTC_VHT 0x00400000 -#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT 23 -#define IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK \ - (7 << IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_SHIFT) -#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_UNSOL_MFB 0x08000000 -#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000 -#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 -#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 -#define IEEE80211_VHT_CAP_EXT_NSS_BW_SHIFT 30 -#define IEEE80211_VHT_CAP_EXT_NSS_BW_MASK 0xc0000000 - -/** - * ieee80211_get_vht_max_nss - return max NSS for a given bandwidth/MCS - * @cap: VHT capabilities of the peer - * @bw: bandwidth to use - * @mcs: MCS index to use - * @ext_nss_bw_capable: indicates whether or not the local transmitter - * (rate scaling algorithm) can deal with the new logic - * (dot11VHTExtendedNSSBWCapable) - * @max_vht_nss: current maximum NSS as advertised by the STA in - * operating mode notification, can be 0 in which case the - * capability data will be used to derive this (from MCS support) - * Return: The maximum NSS that can be used for the given bandwidth/MCS - * combination - * - * Due to the VHT Extended NSS Bandwidth Support, the maximum NSS can - * vary for a given BW/MCS. This function parses the data. - * - * Note: This function is exported by cfg80211. - */ -int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap, - enum ieee80211_vht_chanwidth bw, - int mcs, bool ext_nss_bw_capable, - unsigned int max_vht_nss); - /* 802.11ax HE MAC capabilities */ #define IEEE80211_HE_MAC_CAP0_HTC_HE 0x01 #define IEEE80211_HE_MAC_CAP0_TWT_REQ 0x02 @@ -3561,13 +3353,6 @@ enum ieee80211_spectrum_mgmt_actioncode { WLAN_ACTION_SPCT_CHL_SWITCH = 4, }; -/* VHT action codes */ -enum ieee80211_vht_actioncode { - WLAN_VHT_ACTION_COMPRESSED_BF = 0, - WLAN_VHT_ACTION_GROUPID_MGMT = 1, - WLAN_VHT_ACTION_OPMODE_NOTIF = 2, -}; - /* Self Protected Action codes */ enum ieee80211_self_protected_actioncode { WLAN_SP_RESERVED = 0, @@ -5619,6 +5404,7 @@ static inline u32 ieee80211_eml_trans_timeout_in_us(u16 eml_cap) #define NAN_DEV_CAPA_S3_SUPPORTED 0x10 #include "ieee80211-ht.h" +#include "ieee80211-vht.h" #include "ieee80211-mesh.h" #endif /* LINUX_IEEE80211_H */ -- cgit v1.2.3 From 02a2cf302557eb59794bba0b05d6755f44928d78 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 5 Nov 2025 15:36:52 +0100 Subject: wifi: ieee80211: split HE definitions out The ieee80211.h file has gotten very long, continue splitting it by putting HE definitions into a separate file. Link: https://patch.msgid.link/20251105153843.6998c0802104.I3dd7cfea6abbd118b999ecdedd48437d39cb0533@changeid Signed-off-by: Johannes Berg --- include/linux/ieee80211-he.h | 824 +++++++++++++++++++++++++++++++++++++++++++ include/linux/ieee80211.h | 806 +----------------------------------------- 2 files changed, 827 insertions(+), 803 deletions(-) create mode 100644 include/linux/ieee80211-he.h (limited to 'include/linux') diff --git a/include/linux/ieee80211-he.h b/include/linux/ieee80211-he.h new file mode 100644 index 000000000000..904d50db5bb8 --- /dev/null +++ b/include/linux/ieee80211-he.h @@ -0,0 +1,824 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * IEEE 802.11 HE definitions + * + * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen + * + * Copyright (c) 2002-2003, Jouni Malinen + * Copyright (c) 2005, Devicescape Software, Inc. + * Copyright (c) 2006, Michael Wu + * Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH + * Copyright (c) 2016 - 2017 Intel Deutschland GmbH + * Copyright (c) 2018 - 2025 Intel Corporation + */ + +#ifndef LINUX_IEEE80211_HE_H +#define LINUX_IEEE80211_HE_H + +#include +#include + +#define IEEE80211_TWT_CONTROL_NDP BIT(0) +#define IEEE80211_TWT_CONTROL_RESP_MODE BIT(1) +#define IEEE80211_TWT_CONTROL_NEG_TYPE_BROADCAST BIT(3) +#define IEEE80211_TWT_CONTROL_RX_DISABLED BIT(4) +#define IEEE80211_TWT_CONTROL_WAKE_DUR_UNIT BIT(5) + +#define IEEE80211_TWT_REQTYPE_REQUEST BIT(0) +#define IEEE80211_TWT_REQTYPE_SETUP_CMD GENMASK(3, 1) +#define IEEE80211_TWT_REQTYPE_TRIGGER BIT(4) +#define IEEE80211_TWT_REQTYPE_IMPLICIT BIT(5) +#define IEEE80211_TWT_REQTYPE_FLOWTYPE BIT(6) +#define IEEE80211_TWT_REQTYPE_FLOWID GENMASK(9, 7) +#define IEEE80211_TWT_REQTYPE_WAKE_INT_EXP GENMASK(14, 10) +#define IEEE80211_TWT_REQTYPE_PROTECTION BIT(15) + +enum ieee80211_twt_setup_cmd { + TWT_SETUP_CMD_REQUEST, + TWT_SETUP_CMD_SUGGEST, + TWT_SETUP_CMD_DEMAND, + TWT_SETUP_CMD_GROUPING, + TWT_SETUP_CMD_ACCEPT, + TWT_SETUP_CMD_ALTERNATE, + TWT_SETUP_CMD_DICTATE, + TWT_SETUP_CMD_REJECT, +}; + +struct ieee80211_twt_params { + __le16 req_type; + __le64 twt; + u8 min_twt_dur; + __le16 mantissa; + u8 channel; +} __packed; + +struct ieee80211_twt_setup { + u8 dialog_token; + u8 element_id; + u8 length; + u8 control; + u8 params[]; +} __packed; + +/** + * struct ieee80211_he_cap_elem - HE capabilities element + * @mac_cap_info: HE MAC Capabilities Information + * @phy_cap_info: HE PHY Capabilities Information + * + * This structure represents the fixed fields of the payload of the + * "HE capabilities element" as described in IEEE Std 802.11ax-2021 + * sections 9.4.2.248.2 and 9.4.2.248.3. + */ +struct ieee80211_he_cap_elem { + u8 mac_cap_info[6]; + u8 phy_cap_info[11]; +} __packed; + +#define IEEE80211_TX_RX_MCS_NSS_DESC_MAX_LEN 5 + +/** + * enum ieee80211_he_mcs_support - HE MCS support definitions + * @IEEE80211_HE_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the + * number of streams + * @IEEE80211_HE_MCS_SUPPORT_0_9: MCSes 0-9 are supported + * @IEEE80211_HE_MCS_SUPPORT_0_11: MCSes 0-11 are supported + * @IEEE80211_HE_MCS_NOT_SUPPORTED: This number of streams isn't supported + * + * These definitions are used in each 2-bit subfield of the rx_mcs_* + * and tx_mcs_* fields of &struct ieee80211_he_mcs_nss_supp, which are + * both split into 8 subfields by number of streams. These values indicate + * which MCSes are supported for the number of streams the value appears + * for. + */ +enum ieee80211_he_mcs_support { + IEEE80211_HE_MCS_SUPPORT_0_7 = 0, + IEEE80211_HE_MCS_SUPPORT_0_9 = 1, + IEEE80211_HE_MCS_SUPPORT_0_11 = 2, + IEEE80211_HE_MCS_NOT_SUPPORTED = 3, +}; + +/** + * struct ieee80211_he_mcs_nss_supp - HE Tx/Rx HE MCS NSS Support Field + * + * This structure holds the data required for the Tx/Rx HE MCS NSS Support Field + * described in P802.11ax_D2.0 section 9.4.2.237.4 + * + * @rx_mcs_80: Rx MCS map 2 bits for each stream, total 8 streams, for channel + * widths less than 80MHz. + * @tx_mcs_80: Tx MCS map 2 bits for each stream, total 8 streams, for channel + * widths less than 80MHz. + * @rx_mcs_160: Rx MCS map 2 bits for each stream, total 8 streams, for channel + * width 160MHz. + * @tx_mcs_160: Tx MCS map 2 bits for each stream, total 8 streams, for channel + * width 160MHz. + * @rx_mcs_80p80: Rx MCS map 2 bits for each stream, total 8 streams, for + * channel width 80p80MHz. + * @tx_mcs_80p80: Tx MCS map 2 bits for each stream, total 8 streams, for + * channel width 80p80MHz. + */ +struct ieee80211_he_mcs_nss_supp { + __le16 rx_mcs_80; + __le16 tx_mcs_80; + __le16 rx_mcs_160; + __le16 tx_mcs_160; + __le16 rx_mcs_80p80; + __le16 tx_mcs_80p80; +} __packed; + +/** + * struct ieee80211_he_operation - HE Operation element + * @he_oper_params: HE Operation Parameters + BSS Color Information + * @he_mcs_nss_set: Basic HE-MCS And NSS Set + * @optional: Optional fields VHT Operation Information, Max Co-Hosted + * BSSID Indicator, and 6 GHz Operation Information + * + * This structure represents the payload of the "HE Operation + * e