From 517f43e5a922d51ac960424de4f72676fe6a7390 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 23 Jul 2011 01:20:07 +0200 Subject: bcma: add functions to scan cores needed on SoCs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The chip common and mips core have to be setup early in the boot process to get the cpu clock. bcma_bus_early_register() gets pointers to some space to store the core data and searches for the chip common and mips core and initializes chip common. After that was done and the kernel is out of early boot we just have to run bcma_bus_register() and it will search for the other cores, initialize and register them. The cores are getting the same numbers as before. Acked-by: Rafał Miłecki Signed-off-by: Hauke Mehrtens Acked-by: Ralf Baechle Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 1 + include/linux/bcma/bcma_driver_chipcommon.h | 1 + 2 files changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index 8c96654bef16..e31c9b462221 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -190,6 +190,7 @@ struct bcma_bus { struct bcma_device *mapped_core; struct list_head cores; u8 nr_cores; + u8 init_done:1; struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index a0f684615ae5..c8b4cf7f9fae 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -252,6 +252,7 @@ struct bcma_drv_cc { u32 status; u32 capabilities; u32 capabilities_ext; + u8 setup_done:1; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; -- cgit v1.2.3 From ecd177c21640e92b059a71139f5850243a8f0942 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 23 Jul 2011 01:20:08 +0200 Subject: bcma: add SOC bus MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds support for using bcma on a Broadcom SoC as the system bus. An SoC like the bcm4716 could register this bus and use it to searches for the bcma cores and register the devices on this bus. BCMA_HOSTTYPE_NONE was intended for SoCs at first but BCMA_HOSTTYPE_SOC is a better name. Acked-by: Rafał Miłecki Signed-off-by: Hauke Mehrtens Acked-by: Ralf Baechle Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 5 ++++- include/linux/bcma/bcma_soc.h | 16 ++++++++++++++++ 2 files changed, 20 insertions(+), 1 deletion(-) create mode 100644 include/linux/bcma/bcma_soc.h (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index e31c9b462221..c70cec59d80e 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -14,9 +14,9 @@ struct bcma_device; struct bcma_bus; enum bcma_hosttype { - BCMA_HOSTTYPE_NONE, BCMA_HOSTTYPE_PCI, BCMA_HOSTTYPE_SDIO, + BCMA_HOSTTYPE_SOC, }; struct bcma_chipinfo { @@ -138,6 +138,9 @@ struct bcma_device { u32 addr; u32 wrap; + void __iomem *io_addr; + void __iomem *io_wrap; + void *drvdata; struct list_head list; }; diff --git a/include/linux/bcma/bcma_soc.h b/include/linux/bcma/bcma_soc.h new file mode 100644 index 000000000000..4203c5593b9f --- /dev/null +++ b/include/linux/bcma/bcma_soc.h @@ -0,0 +1,16 @@ +#ifndef LINUX_BCMA_SOC_H_ +#define LINUX_BCMA_SOC_H_ + +#include + +struct bcma_soc { + struct bcma_bus bus; + struct bcma_device core_cc; + struct bcma_device core_mips; +}; + +int __init bcma_host_soc_register(struct bcma_soc *soc); + +int bcma_bus_register(struct bcma_bus *bus); + +#endif /* LINUX_BCMA_SOC_H_ */ -- cgit v1.2.3 From 21e0534ad7415559bb8dee0dc00e39646fed83c9 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 23 Jul 2011 01:20:09 +0200 Subject: bcma: add mips driver This adds a mips driver to bcma. This is only found on embedded devices. For now the driver just initializes the irqs used on this system. Signed-off-by: Hauke Mehrtens Acked-by: Ralf Baechle Signed-off-by: John W. Linville --- include/linux/bcma/bcma.h | 3 ++ include/linux/bcma/bcma_driver_chipcommon.h | 13 ++++++++ include/linux/bcma/bcma_driver_mips.h | 49 +++++++++++++++++++++++++++++ 3 files changed, 65 insertions(+) create mode 100644 include/linux/bcma/bcma_driver_mips.h (limited to 'include/linux') diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h index c70cec59d80e..5dbd7055cb86 100644 --- a/include/linux/bcma/bcma.h +++ b/include/linux/bcma/bcma.h @@ -6,6 +6,7 @@ #include #include +#include #include /* SPROM sharing */ #include "bcma_regs.h" @@ -130,6 +131,7 @@ struct bcma_device { struct device dev; struct device *dma_dev; + unsigned int irq; bool dev_registered; @@ -197,6 +199,7 @@ struct bcma_bus { struct bcma_drv_cc drv_cc; struct bcma_drv_pci drv_pci; + struct bcma_drv_mips drv_mips; /* We decided to share SPROM struct with SSB as long as we do not need * any hacks for BCMA. This simplifies drivers code. */ diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index c8b4cf7f9fae..03cde8d22e5f 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -24,6 +24,7 @@ #define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ #define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ #define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ +#define BCMA_CC_FLASHT_NFLASH 0x00000200 #define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ #define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ #define BCMA_PLLTYPE_NONE 0x00000000 @@ -178,6 +179,7 @@ #define BCMA_CC_PROG_CFG 0x0120 #define BCMA_CC_PROG_WAITCNT 0x0124 #define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_CFG_DS 0x0010 /* Data size, 0=8bit, 1=16bit */ #define BCMA_CC_FLASH_WAITCNT 0x012C /* 0x1E0 is defined as shared BCMA_CLKCTLST */ #define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ @@ -247,6 +249,14 @@ struct bcma_chipcommon_pmu { u32 crystalfreq; /* The active crystal frequency (in kHz) */ }; +#ifdef CONFIG_BCMA_DRIVER_MIPS +struct bcma_pflash { + u8 buswidth; + u32 window; + u32 window_size; +}; +#endif /* CONFIG_BCMA_DRIVER_MIPS */ + struct bcma_drv_cc { struct bcma_device *core; u32 status; @@ -256,6 +266,9 @@ struct bcma_drv_cc { /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; struct bcma_chipcommon_pmu pmu; +#ifdef CONFIG_BCMA_DRIVER_MIPS + struct bcma_pflash pflash; +#endif /* CONFIG_BCMA_DRIVER_MIPS */ }; /* Register access */ diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h new file mode 100644 index 000000000000..82b3bfd32c76 --- /dev/null +++ b/include/linux/bcma/bcma_driver_mips.h @@ -0,0 +1,49 @@ +#ifndef LINUX_BCMA_DRIVER_MIPS_H_ +#define LINUX_BCMA_DRIVER_MIPS_H_ + +#define BCMA_MIPS_IPSFLAG 0x0F08 +/* which sbflags get routed to mips interrupt 1 */ +#define BCMA_MIPS_IPSFLAG_IRQ1 0x0000003F +#define BCMA_MIPS_IPSFLAG_IRQ1_SHIFT 0 +/* which sbflags get routed to mips interrupt 2 */ +#define BCMA_MIPS_IPSFLAG_IRQ2 0x00003F00 +#define BCMA_MIPS_IPSFLAG_IRQ2_SHIFT 8 +/* which sbflags get routed to mips interrupt 3 */ +#define BCMA_MIPS_IPSFLAG_IRQ3 0x003F0000 +#define BCMA_MIPS_IPSFLAG_IRQ3_SHIFT 16 +/* which sbflags get routed to mips interrupt 4 */ +#define BCMA_MIPS_IPSFLAG_IRQ4 0x3F000000 +#define BCMA_MIPS_IPSFLAG_IRQ4_SHIFT 24 + +/* MIPS 74K core registers */ +#define BCMA_MIPS_MIPS74K_CORECTL 0x0000 +#define BCMA_MIPS_MIPS74K_EXCEPTBASE 0x0004 +#define BCMA_MIPS_MIPS74K_BIST 0x000C +#define BCMA_MIPS_MIPS74K_INTMASK_INT0 0x0014 +#define BCMA_MIPS_MIPS74K_INTMASK(int) \ + ((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0) +#define BCMA_MIPS_MIPS74K_NMIMASK 0x002C +#define BCMA_MIPS_MIPS74K_GPIOSEL 0x0040 +#define BCMA_MIPS_MIPS74K_GPIOOUT 0x0044 +#define BCMA_MIPS_MIPS74K_GPIOEN 0x0048 +#define BCMA_MIPS_MIPS74K_CLKCTLST 0x01E0 + +#define BCMA_MIPS_OOBSELOUTA30 0x100 + +struct bcma_device; + +struct bcma_drv_mips { + struct bcma_device *core; + u8 setup_done:1; + unsigned int assigned_irqs; +}; + +#ifdef CONFIG_BCMA_DRIVER_MIPS +extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); +#else +static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } +#endif + +extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); + +#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ -- cgit v1.2.3 From e3afe0e5be7576ac1282ea9fbbc9b352bb379227 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 23 Jul 2011 01:20:10 +0200 Subject: bcma: add serial console support This adds support for serial console to bcma, when operating on an SoC. Signed-off-by: Hauke Mehrtens Acked-by: Ralf Baechle Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 03cde8d22e5f..b9a930eb44cd 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -241,6 +241,9 @@ #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ #define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ +/* ALP clock on pre-PMU chips */ +#define BCMA_CC_PMU_ALP_CLOCK 20000000 + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ @@ -255,6 +258,14 @@ struct bcma_pflash { u32 window; u32 window_size; }; + +struct bcma_serial_port { + void *regs; + unsigned long clockspeed; + unsigned int irq; + unsigned int baud_base; + unsigned int reg_shift; +}; #endif /* CONFIG_BCMA_DRIVER_MIPS */ struct bcma_drv_cc { @@ -268,6 +279,9 @@ struct bcma_drv_cc { struct bcma_chipcommon_pmu pmu; #ifdef CONFIG_BCMA_DRIVER_MIPS struct bcma_pflash pflash; + + int nr_serial_ports; + struct bcma_serial_port serial_ports[4]; #endif /* CONFIG_BCMA_DRIVER_MIPS */ }; -- cgit v1.2.3 From 908debc8da0d5a91418f71c6a462f62bd2ac69ef Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 23 Jul 2011 01:20:11 +0200 Subject: bcma: get CPU clock Add method to return the clock of the CPU. This is needed by the arch code to calculate the mips_hpt_frequency. Signed-off-by: Hauke Mehrtens Acked-by: Ralf Baechle Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 39 +++++++++++++++++++++++++++++ include/linux/bcma/bcma_driver_mips.h | 2 ++ 2 files changed, 41 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index b9a930eb44cd..6083725dd22e 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -241,8 +241,47 @@ #define BCMA_CC_SPROM 0x0800 /* SPROM beginning */ #define BCMA_CC_SPROM_PCIE6 0x0830 /* SPROM beginning on PCIe rev >= 6 */ +/* Divider allocation in 4716/47162/5356 */ +#define BCMA_CC_PMU5_MAINPLL_CPU 1 +#define BCMA_CC_PMU5_MAINPLL_MEM 2 +#define BCMA_CC_PMU5_MAINPLL_SSB 3 + +/* PLL usage in 4716/47162 */ +#define BCMA_CC_PMU4716_MAINPLL_PLL0 12 + +/* PLL usage in 5356/5357 */ +#define BCMA_CC_PMU5356_MAINPLL_PLL0 0 +#define BCMA_CC_PMU5357_MAINPLL_PLL0 0 + +/* 4706 PMU */ +#define BCMA_CC_PMU4706_MAINPLL_PLL0 0 + /* ALP clock on pre-PMU chips */ #define BCMA_CC_PMU_ALP_CLOCK 20000000 +/* HT clock for systems with PMU-enabled chipcommon */ +#define BCMA_CC_PMU_HT_CLOCK 80000000 + +/* PMU rev 5 (& 6) */ +#define BCMA_CC_PPL_P1P2_OFF 0 +#define BCMA_CC_PPL_P1_MASK 0x0f000000 +#define BCMA_CC_PPL_P1_SHIFT 24 +#define BCMA_CC_PPL_P2_MASK 0x00f00000 +#define BCMA_CC_PPL_P2_SHIFT 20 +#define BCMA_CC_PPL_M14_OFF 1 +#define BCMA_CC_PPL_MDIV_MASK 0x000000ff +#define BCMA_CC_PPL_MDIV_WIDTH 8 +#define BCMA_CC_PPL_NM5_OFF 2 +#define BCMA_CC_PPL_NDIV_MASK 0xfff00000 +#define BCMA_CC_PPL_NDIV_SHIFT 20 +#define BCMA_CC_PPL_FMAB_OFF 3 +#define BCMA_CC_PPL_MRAT_MASK 0xf0000000 +#define BCMA_CC_PPL_MRAT_SHIFT 28 +#define BCMA_CC_PPL_ABRAT_MASK 0x08000000 +#define BCMA_CC_PPL_ABRAT_SHIFT 27 +#define BCMA_CC_PPL_FDIV_MASK 0x07ffffff +#define BCMA_CC_PPL_PLLCTL_OFF 4 +#define BCMA_CC_PPL_PCHI_OFF 5 +#define BCMA_CC_PPL_PCHI_MASK 0x0000003f /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) diff --git a/include/linux/bcma/bcma_driver_mips.h b/include/linux/bcma/bcma_driver_mips.h index 82b3bfd32c76..c0043645cdcb 100644 --- a/include/linux/bcma/bcma_driver_mips.h +++ b/include/linux/bcma/bcma_driver_mips.h @@ -44,6 +44,8 @@ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore); static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { } #endif +extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore); + extern unsigned int bcma_core_mips_irq(struct bcma_device *dev); #endif /* LINUX_BCMA_DRIVER_MIPS_H_ */ -- cgit v1.2.3 From 454496fd05b1463efa46ec7a42576e3d319cc291 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sat, 23 Jul 2011 11:10:11 +0200 Subject: ssb: define boardflags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit They are SPROM specific, so all should be defined in ssb code. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/ssb/ssb_regs.h | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index efbf459d571c..98941203a27f 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -462,6 +462,46 @@ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ +/* Values for boardflags_lo read from SPROM */ +#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ +#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ +#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ +#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ +#define SSB_BFL_ENETSPI 0x0010 /* has ephy roboswitch spi */ +#define SSB_BFL_XTAL_NOSLOW 0x0020 /* no slow clock available */ +#define SSB_BFL_CCKHIPWR 0x0040 /* can do high power CCK transmission */ +#define SSB_BFL_ENETADM 0x0080 /* has ADMtek switch */ +#define SSB_BFL_ENETVLAN 0x0100 /* can do vlan */ +#define SSB_BFL_AFTERBURNER 0x0200 /* supports Afterburner mode */ +#define SSB_BFL_NOPCI 0x0400 /* board leaves PCI floating */ +#define SSB_BFL_FEM 0x0800 /* supports the Front End Module */ +#define SSB_BFL_EXTLNA 0x1000 /* has an external LNA */ +#define SSB_BFL_HGPA 0x2000 /* had high gain PA */ +#define SSB_BFL_BTCMOD 0x4000 /* BFL_BTCOEXIST is given in alternate GPIOs */ +#define SSB_BFL_ALTIQ 0x8000 /* alternate I/Q settings */ + +/* Values for boardflags_hi read from SPROM */ +#define SSB_BFH_NOPA 0x0001 /* has no PA */ +#define SSB_BFH_RSSIINV 0x0002 /* RSSI uses positive slope (not TSSI) */ +#define SSB_BFH_PAREF 0x0004 /* uses the PARef LDO */ +#define SSB_BFH_3TSWITCH 0x0008 /* uses a triple throw switch shared with bluetooth */ +#define SSB_BFH_PHASESHIFT 0x0010 /* can support phase shifter */ +#define SSB_BFH_BUCKBOOST 0x0020 /* has buck/booster */ +#define SSB_BFH_FEM_BT 0x0040 /* has FEM and switch to share antenna with bluetooth */ + +/* Values for boardflags2_lo read from SPROM */ +#define SSB_BFL2_RXBB_INT_REG_DIS 0x0001 /* external RX BB regulator present */ +#define SSB_BFL2_APLL_WAR 0x0002 /* alternative A-band PLL settings implemented */ +#define SSB_BFL2_TXPWRCTRL_EN 0x0004 /* permits enabling TX Power Control */ +#define SSB_BFL2_2X4_DIV 0x0008 /* 2x4 diversity switch */ +#define SSB_BFL2_5G_PWRGAIN 0x0010 /* supports 5G band power gain */ +#define SSB_BFL2_PCIEWAR_OVR 0x0020 /* overrides ASPM and Clkreq settings */ +#define SSB_BFL2_CAESERS_BRD 0x0040 /* is Caesers board (unused) */ +#define SSB_BFL2_BTC3WIRE 0x0080 /* used 3-wire bluetooth coexist */ +#define SSB_BFL2_SKWRKFEM_BRD 0x0100 /* 4321mcm93 uses Skyworks FEM */ +#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ +#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ + /* Values for SSB_SPROM1_BINF_CCODE */ enum { SSB_SPROM1CCODE_WORLD = 0, -- cgit v1.2.3 From 32e9de846be885444358b67267f837088c05e0c2 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Wed, 10 Aug 2011 23:53:31 +0300 Subject: nl80211/cfg80211: Allow SSID to be specified in new beacon command This makes it easier for drivers that generate Beacon and Probe Response frames internally (in firmware most likely) in AP mode. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 8ad70dcac3f9..227ee9a0ff1a 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -161,6 +161,9 @@ * @NL80211_CMD_SET_BEACON: set the beacon on an access point interface * using the %NL80211_ATTR_BEACON_INTERVAL, %NL80211_ATTR_DTIM_PERIOD, * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. + * Following attributes are provided for drivers that generate full Beacon + * and Probe Response frames internally: %NL80211_ATTR_SSID, + * %NL80211_ATTR_HIDDEN_SSID. * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, * parameters are like for %NL80211_CMD_SET_BEACON. * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it @@ -1019,6 +1022,10 @@ enum nl80211_commands { * being a list of supported rates as defined by IEEE 802.11 7.3.2.2 but * without the length restriction (at most %NL80211_MAX_SUPP_RATES). * + * @NL80211_ATTR_HIDDEN_SSID: indicates whether SSID is to be hidden from Beacon + * and Probe Response (when response to wildcard Probe Request); see + * &enum nl80211_hidden_ssid, represented as a u32 + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1224,6 +1231,8 @@ enum nl80211_attrs { NL80211_ATTR_SCAN_SUPP_RATES, + NL80211_ATTR_HIDDEN_SSID, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2430,4 +2439,19 @@ enum nl80211_rekey_data { MAX_NL80211_REKEY_DATA = NUM_NL80211_REKEY_DATA - 1 }; +/** + * enum nl80211_hidden_ssid - values for %NL80211_ATTR_HIDDEN_SSID + * @NL80211_HIDDEN_SSID_NOT_IN_USE: do not hide SSID (i.e., broadcast it in + * Beacon frames) + * @NL80211_HIDDEN_SSID_ZERO_LEN: hide SSID by using zero-length SSID element + * in Beacon frames + * @NL80211_HIDDEN_SSID_ZERO_CONTENTS: hide SSID by using correct length of SSID + * element in Beacon frames but zero out each byte in the SSID + */ +enum nl80211_hidden_ssid { + NL80211_HIDDEN_SSID_NOT_IN_USE, + NL80211_HIDDEN_SSID_ZERO_LEN, + NL80211_HIDDEN_SSID_ZERO_CONTENTS +}; + #endif /* __LINUX_NL80211_H */ -- cgit v1.2.3 From 5fb628e9105eef6796789b1ae93289e1566ccdf0 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Wed, 10 Aug 2011 23:54:35 +0300 Subject: nl80211/cfg80211: Add crypto settings into NEW_BEACON This removes need from drivers to parse the beacon tail/head data to figure out what crypto settings are to be used in AP mode in case the Beacon and Probe Response frames are fully constructed in the driver/firmware. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 227ee9a0ff1a..580fcdceed2c 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -163,7 +163,10 @@ * %NL80211_ATTR_BEACON_HEAD and %NL80211_ATTR_BEACON_TAIL attributes. * Following attributes are provided for drivers that generate full Beacon * and Probe Response frames internally: %NL80211_ATTR_SSID, - * %NL80211_ATTR_HIDDEN_SSID. + * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, + * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, + * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, + * %NL80211_ATTR_AUTH_TYPE. * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, * parameters are like for %NL80211_CMD_SET_BEACON. * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it @@ -845,18 +848,20 @@ enum nl80211_commands { * @NL80211_ATTR_STATUS_CODE: StatusCode for the %NL80211_CMD_CONNECT * event (u16) * @NL80211_ATTR_PRIVACY: Flag attribute, used with connect(), indicating - * that protected APs should be used. + * that protected APs should be used. This is also used with NEW_BEACON to + * indicate that the BSS is to use protection. * - * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT and ASSOCIATE to - * indicate which unicast key ciphers will be used with the connection + * @NL80211_ATTR_CIPHERS_PAIRWISE: Used with CONNECT, ASSOCIATE, and NEW_BEACON + * to indicate which unicast key ciphers will be used with the connection * (an array of u32). - * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT and ASSOCIATE to indicate - * which group key cipher will be used with the connection (a u32). - * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT and ASSOCIATE to indicate - * which WPA version(s) the AP we want to associate with is using + * @NL80211_ATTR_CIPHER_GROUP: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which group key cipher will be used with the connection (a + * u32). + * @NL80211_ATTR_WPA_VERSIONS: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which WPA version(s) the AP we want to associate with is using * (a u32 with flags from &enum nl80211_wpa_versions). - * @NL80211_ATTR_AKM_SUITES: Used with CONNECT and ASSOCIATE to indicate - * which key management algorithm(s) to use (an array of u32). + * @NL80211_ATTR_AKM_SUITES: Used with CONNECT, ASSOCIATE, and NEW_BEACON to + * indicate which key management algorithm(s) to use (an array of u32). * * @NL80211_ATTR_REQ_IE: (Re)association request information elements as * sent out by the card, for ROAM and successful CONNECT events. -- cgit v1.2.3 From 9946ecfb510462e59afddb2a992da804d58b6bcd Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Wed, 10 Aug 2011 23:55:56 +0300 Subject: nl80211/cfg80211: Add extra IE configuration to AP mode setup The NL80211_CMD_NEW_BEACON command is, in practice, requesting AP mode operations to be started. Add new attributes to provide extra IEs (e.g., WPS IE, P2P IE) for drivers that build Beacon, Probe Response, and (Re)Association Response frames internally (likely in firmware). Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/linux/nl80211.h | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 580fcdceed2c..89dec16b4697 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -166,7 +166,8 @@ * %NL80211_ATTR_HIDDEN_SSID, %NL80211_ATTR_CIPHERS_PAIRWISE, * %NL80211_ATTR_CIPHER_GROUP, %NL80211_ATTR_WPA_VERSIONS, * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, - * %NL80211_ATTR_AUTH_TYPE. + * %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_IE, %NL80211_ATTR_IE_PROBE_RESP, + * %NL80211_ATTR_IE_ASSOC_RESP. * @NL80211_CMD_NEW_BEACON: add a new beacon to an access point interface, * parameters are like for %NL80211_CMD_SET_BEACON. * @NL80211_CMD_DEL_BEACON: remove the beacon, stop sending it @@ -1031,6 +1032,16 @@ enum nl80211_commands { * and Probe Response (when response to wildcard Probe Request); see * &enum nl80211_hidden_ssid, represented as a u32 * + * @NL80211_ATTR_IE_PROBE_RESP: Information element(s) for Probe Response frame. + * This is used with %NL80211_CMD_NEW_BEACON and %NL80211_CMD_SET_BEACON to + * provide extra IEs (e.g., WPS/P2P IE) into Probe Response frames when the + * driver (or firmware) replies to Probe Request frames. + * @NL80211_ATTR_IE_ASSOC_RESP: Information element(s) for (Re)Association + * Response frames. This is used with %NL80211_CMD_NEW_BEACON and + * %NL80211_CMD_SET_BEACON to provide extra IEs (e.g., WPS/P2P IE) into + * (Re)Association Response frames when the driver (or firmware) replies to + * (Re)Association Request frames. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1238,6 +1249,9 @@ enum nl80211_attrs { NL80211_ATTR_HIDDEN_SSID, + NL80211_ATTR_IE_PROBE_RESP, + NL80211_ATTR_IE_ASSOC_RESP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -- cgit v1.2.3 From 4dc83dfd3efa015628ebaa7245d342c8d5ca0298 Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Mon, 8 Aug 2011 01:33:53 +0000 Subject: if_ether: add new Ethernet Protocol ID for af_iucv Add a new ethertype for af_iucv over s/390 HiperSockets transport. Since HiperSockets is not a real ethernet hw this is not an officially registered ID. Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- include/linux/if_ether.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/if_ether.h b/include/linux/if_ether.h index a3d99ff6e3b5..c63bbd754a84 100644 --- a/include/linux/if_ether.h +++ b/include/linux/if_ether.h @@ -88,6 +88,7 @@ #define ETH_P_QINQ2 0x9200 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_QINQ3 0x9300 /* deprecated QinQ VLAN [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_EDSA 0xDADA /* Ethertype DSA [ NOT AN OFFICIALLY REGISTERED ID ] */ +#define ETH_P_AF_IUCV 0xFBFB /* IBM af_iucv [ NOT AN OFFICIALLY REGISTERED ID ] */ /* * Non DIX types. Won't clash for 1500 types. -- cgit v1.2.3 From 2bb698412d8aab0bfc3f269f5ebe8eb67d7cc8f4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Sun, 14 Aug 2011 22:52:04 -0700 Subject: net: Move sungem_phy.h under include/linux Fixes build failures of the spider_net driver because it tries to use a convoluted path to include this header. Reported-by: Stephen Rothwell Signed-off-by: David S. Miller --- include/linux/sungem_phy.h | 132 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 132 insertions(+) create mode 100644 include/linux/sungem_phy.h (limited to 'include/linux') diff --git a/include/linux/sungem_phy.h b/include/linux/sungem_phy.h new file mode 100644 index 000000000000..af02f9479cbb --- /dev/null +++ b/include/linux/sungem_phy.h @@ -0,0 +1,132 @@ +#ifndef __SUNGEM_PHY_H__ +#define __SUNGEM_PHY_H__ + +struct mii_phy; + +/* Operations supported by any kind of PHY */ +struct mii_phy_ops +{ + int (*init)(struct mii_phy *phy); + int (*suspend)(struct mii_phy *phy); + int (*setup_aneg)(struct mii_phy *phy, u32 advertise); + int (*setup_forced)(struct mii_phy *phy, int speed, int fd); + int (*poll_link)(struct mii_phy *phy); + int (*read_link)(struct mii_phy *phy); + int (*enable_fiber)(struct mii_phy *phy, int autoneg); +}; + +/* Structure used to statically define an mii/gii based PHY */ +struct mii_phy_def +{ + u32 phy_id; /* Concatenated ID1 << 16 | ID2 */ + u32 phy_id_mask; /* Significant bits */ + u32 features; /* Ethtool SUPPORTED_* defines */ + int magic_aneg; /* Autoneg does all speed test for us */ + const char* name; + const struct mii_phy_ops* ops; +}; + +enum { + BCM54XX_COPPER, + BCM54XX_FIBER, + BCM54XX_GBIC, + BCM54XX_SGMII, + BCM54XX_UNKNOWN, +}; + +/* An instance of a PHY, partially borrowed from mii_if_info */ +struct mii_phy +{ + struct mii_phy_def* def; + u32 advertising; + int mii_id; + + /* 1: autoneg enabled, 0: disabled */ + int autoneg; + + /* forced speed & duplex (no autoneg) + * partner speed & duplex & pause (autoneg) + */ + int speed; + int duplex; + int pause; + + /* Provided by host chip */ + struct net_device *dev; + int (*mdio_read) (struct net_device *dev, int mii_id, int reg); + void (*mdio_write) (struct net_device *dev, int mii_id, int reg, int val); + void *platform_data; +}; + +/* Pass in a struct mii_phy with dev, mdio_read and mdio_write + * filled, the remaining fields will be filled on return + */ +extern int mii_phy_probe(struct mii_phy *phy, int mii_id); + + +/* MII definitions missing from mii.h */ + +#define BMCR_SPD2 0x0040 /* Gigabit enable (bcm54xx) */ +#define LPA_PAUSE 0x0400 + +/* More PHY registers (model specific) */ + +/* MII BCM5201 MULTIPHY interrupt register */ +#define MII_BCM5201_INTERRUPT 0x1A +#define MII_BCM5201_INTERRUPT_INTENABLE 0x4000 + +#define MII_BCM5201_AUXMODE2 0x1B +#define MII_BCM5201_AUXMODE2_LOWPOWER 0x0008 + +#define MII_BCM5201_MULTIPHY 0x1E + +/* MII BCM5201 MULTIPHY register bits */ +#define MII_BCM5201_MULTIPHY_SERIALMODE 0x0002 +#define MII_BCM5201_MULTIPHY_SUPERISOLATE 0x0008 + +/* MII BCM5221 Additional registers */ +#define MII_BCM5221_TEST 0x1f +#define MII_BCM5221_TEST_ENABLE_SHADOWS 0x0080 +#define MII_BCM5221_SHDOW_AUX_STAT2 0x1b +#define MII_BCM5221_SHDOW_AUX_STAT2_APD 0x0020 +#define MII_BCM5221_SHDOW_AUX_MODE4 0x1a +#define MII_BCM5221_SHDOW_AUX_MODE4_IDDQMODE 0x0001 +#define MII_BCM5221_SHDOW_AUX_MODE4_CLKLOPWR 0x0004 + +/* MII BCM5241 Additional registers */ +#define MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR 0x0008 + +/* MII BCM5400 1000-BASET Control register */ +#define MII_BCM5400_GB_CONTROL 0x09 +#define MII_BCM5400_GB_CONTROL_FULLDUPLEXCAP 0x0200 + +/* MII BCM5400 AUXCONTROL register */ +#define MII_BCM5400_AUXCONTROL 0x18 +#define MII_BCM5400_AUXCONTROL_PWR10BASET 0x0004 + +/* MII BCM5400 AUXSTATUS register */ +#define MII_BCM5400_AUXSTATUS 0x19 +#define MII_BCM5400_AUXSTATUS_LINKMODE_MASK 0x0700 +#define MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT 8 + +/* 1000BT control (Marvell & BCM54xx at least) */ +#define MII_1000BASETCONTROL 0x09 +#define MII_1000BASETCONTROL_FULLDUPLEXCAP 0x0200 +#define MII_1000BASETCONTROL_HALFDUPLEXCAP 0x0100 + +/* Marvell 88E1011 PHY control */ +#define MII_M1011_PHY_SPEC_CONTROL 0x10 +#define MII_M1011_PHY_SPEC_CONTROL_MANUAL_MDIX 0x20 +#define MII_M1011_PHY_SPEC_CONTROL_AUTO_MDIX 0x40 + +/* Marvell 88E1011 PHY status */ +#define MII_M1011_PHY_SPEC_STATUS 0x11 +#define MII_M1011_PHY_SPEC_STATUS_1000 0x8000 +#define MII_M1011_PHY_SPEC_STATUS_100 0x4000 +#define MII_M1011_PHY_SPEC_STATUS_SPD_MASK 0xc000 +#define MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX 0x2000 +#define MII_M1011_PHY_SPEC_STATUS_RESOLVED 0x0800 +#define MII_M1011_PHY_SPEC_STATUS_TX_PAUSE 0x0008 +#define MII_M1011_PHY_SPEC_STATUS_RX_PAUSE 0x0004 + +#endif /* __SUNGEM_PHY_H__ */ -- cgit v1.2.3 From 19e2f6fe9601ca5c846b7163e6d6d00f87b34760 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 15 Aug 2011 23:10:39 -0700 Subject: net: Fix sungem_phy sharing. Since sungem_phy is used by multiple, unrelated, drivers make it build as a real module under drivers/net. depmod will pick up the symbol dependency and make sure sungem_phy.ko gets loaded any time sungem.ko or spider_net.ko is loaded. Tested-by: Stephen Rothwell Signed-off-by: David S. Miller --- include/linux/sungem_phy.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/sungem_phy.h b/include/linux/sungem_phy.h index af02f9479cbb..bd9be9f59d3a 100644 --- a/include/linux/sungem_phy.h +++ b/include/linux/sungem_phy.h @@ -61,7 +61,7 @@ struct mii_phy /* Pass in a struct mii_phy with dev, mdio_read and mdio_write * filled, the remaining fields will be filled on return */ -extern int mii_phy_probe(struct mii_phy *phy, int mii_id); +extern int sungem_phy_probe(struct mii_phy *phy, int mii_id); /* MII definitions missing from mii.h */ -- cgit v1.2.3 From 5f308d195ed2ae227bea569c7c8a4563e04e0110 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 15 Aug 2011 14:06:20 +0000 Subject: ethtool: Reformat struct ethtool_coalesce comments into kernel-doc format This reorders and duplicates some wording, but should make no substantive changes. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/ethtool.h | 135 +++++++++++++++++++++++------------------------- 1 file changed, 64 insertions(+), 71 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index c6e427ab65fe..be32dd03e10c 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -117,99 +117,92 @@ struct ethtool_eeprom { __u8 data[0]; }; -/* for configuring coalescing parameters of chip */ +/** + * struct ethtool_coalesce - coalescing parameters of chip + * @cmd: ETHTOOL_{G,S}COALESCE + * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after + * a packet arrives. If 0, only @rx_max_coalesced_frames is used. + * @rx_max_coalesced_frames: How many packets to delay an RX interrupt + * after a packet arrives. If 0, only @rx_coalesce_usecs is used. + * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that + * this value applies while an IRQ is being serviced by the host. + * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames, + * except that this value applies while an IRQ is being serviced + * by the host. + * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after + * a packet is sent. If 0, only @tx_max_coalesced_frames + * is used. + * @tx_max_coalesced_frames: How many packets to delay a TX interrupt + * after a packet is sent. If 0, only @tx_coalesce_usecs is + * used. + * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that + * this value applies while an IRQ is being serviced by the host. + * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames, + * except that this value applies while an IRQ is being serviced + * by the host. + * @stats_block_coalesce_usecs: How many usecs to delay in-memory + * statistics block updates. Some drivers do not have an + * in-memory statistic block, and in such cases this value is + * ignored. This value must not be zero. + * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing. + * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing. + * @pkt_rate_low: Threshold for low packet rate (packets per second). + * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after + * a packet arrives, when the packet rate is below @pkt_rate_low. + * @rx_max_coalesced_frames_low: How many packets to delay an RX interrupt + * after a packet arrives, when the packet rate is below @pkt_rate_low. + * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after + * a packet is sent, when the packet rate is below @pkt_rate_low. + * @tx_max_coalesced_frames_low: How many packets to delay a TX interrupt + * after a packet is sent, when the packet rate is below @pkt_rate_low. + * @pkt_rate_high: Threshold for high packet rate (packets per second). + * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after + * a packet arrives, when the packet rate is above @pkt_rate_high. + * @rx_max_coalesced_frames_high: How many packets to delay an RX interrupt + * after a packet arrives, when the packet rate is above @pkt_rate_high. + * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after + * a packet is sent, when the packet rate is above @pkt_rate_high. + * @tx_max_coalesced_frames_high: How many packets to delay a TX interrupt + * after a packet is sent, when the packet rate is above @pkt_rate_high. + * @rate_sample_interval: How often to do adaptive coalescing packet rate + * sampling, measured in seconds. Must not be zero. + * + * It is illegal to set both usecs and max frames to zero as this + * would cause interrupts to never be generated. + * + * Adaptive RX/TX coalescing is an algorithm implemented by some + * drivers to improve latency under low packet rates and improve + * throughput under high packet rates. Some drivers only implement + * one of RX or TX adaptive coalescing. Anything not implemented by + * the driver causes these values to be silently ignored. + * + * When the packet rate is below @pkt_rate_high but above + * @pkt_rate_low (both measured in packets per second) the + * normal {rx,tx}_* coalescing parameters are used. + */ struct ethtool_coalesce { - __u32 cmd; /* ETHTOOL_{G,S}COALESCE */ - - /* How many usecs to delay an RX interrupt after - * a packet arrives. If 0, only rx_max_coalesced_frames - * is used. - */ + __u32 cmd; __u32 rx_coalesce_usecs; - - /* How many packets to delay an RX interrupt after - * a packet arrives. If 0, only rx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause RX interrupts to never be - * generated. - */ __u32 rx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being serviced by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ __u32 rx_coalesce_usecs_irq; __u32 rx_max_coalesced_frames_irq; - - /* How many usecs to delay a TX interrupt after - * a packet is sent. If 0, only tx_max_coalesced_frames - * is used. - */ __u32 tx_coalesce_usecs; - - /* How many packets to delay a TX interrupt after - * a packet is sent. If 0, only tx_coalesce_usecs is - * used. It is illegal to set both usecs and max frames - * to zero as this would cause TX interrupts to never be - * generated. - */ __u32 tx_max_coalesced_frames; - - /* Same as above two parameters, except that these values - * apply while an IRQ is being serviced by the host. Not - * all cards support this feature and the values are ignored - * in that case. - */ __u32 tx_coalesce_usecs_irq; __u32 tx_max_coalesced_frames_irq; - - /* How many usecs to delay in-memory statistics - * block updates. Some drivers do not have an in-memory - * statistic block, and in such cases this value is ignored. - * This value must not be zero. - */ __u32 stats_block_coalesce_usecs; - - /* Adaptive RX/TX coalescing is an algorithm implemented by - * some drivers to improve latency under low packet rates and - * improve throughput under high packet rates. Some drivers - * only implement one of RX or TX adaptive coalescing. Anything - * not implemented by the driver causes these values to be - * silently ignored. - */ __u32 use_adaptive_rx_coalesce; __u32 use_adaptive_tx_coalesce; - - /* When the packet rate (measured in packets per second) - * is below pkt_rate_low, the {rx,tx}_*_low parameters are - * used. - */ __u32 pkt_rate_low; __u32 rx_coalesce_usecs_low; __u32 rx_max_coalesced_frames_low; __u32 tx_coalesce_usecs_low; __u32 tx_max_coalesced_frames_low; - - /* When the packet rate is below pkt_rate_high but above - * pkt_rate_low (both measured in packets per second) the - * normal {rx,tx}_* coalescing parameters are used. - */ - - /* When the packet rate is (measured in packets per second) - * is above pkt_rate_high, the {rx,tx}_*_high parameters are - * used. - */ __u32 pkt_rate_high; __u32 rx_coalesce_usecs_high; __u32 rx_max_coalesced_frames_high; __u32 tx_coalesce_usecs_high; __u32 tx_max_coalesced_frames_high; - - /* How often to do adaptive coalescing packet rate sampling, - * measured in seconds. Must not be zero. - */ __u32 rate_sample_interval; }; -- cgit v1.2.3 From 725b361b29ba9fb72705a30743d288ee66055209 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 15 Aug 2011 14:07:15 +0000 Subject: ethtool: Specify what kind of coalescing struct ethtool_coalesce covers Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/ethtool.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index be32dd03e10c..71d45a199f96 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -118,7 +118,7 @@ struct ethtool_eeprom { }; /** - * struct ethtool_coalesce - coalescing parameters of chip + * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates * @cmd: ETHTOOL_{G,S}COALESCE * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after * a packet arrives. If 0, only @rx_max_coalesced_frames is used. -- cgit v1.2.3 From 2d7c79390eccd743a643db3fa577f4837e7f2b85 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 15 Aug 2011 14:07:47 +0000 Subject: ethtool: Correct description of 'max_coalesced_frames' fields The current descriptions state that these fields specify 'How many packets to delay ... after a packet ...' which implies that the hardware should wait for (max_coalesced_frames + 1) completions before generating an interrupt. It is also stated that setting both this field and the corresponding 'coalesce_usecs' field to 0 is invalid. Together, this implies that the hardware must always be configured to delay a completion IRQ for at least 1 usec or 1 more completion. I believe that the addition of 1 is not intended, and David Miller confirms that the original implementation (in tg3) does not do this. Clarify the descriptions of these fields to avoid this interpretation. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/ethtool.h | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 71d45a199f96..18059ca41f09 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -122,8 +122,8 @@ struct ethtool_eeprom { * @cmd: ETHTOOL_{G,S}COALESCE * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after * a packet arrives. If 0, only @rx_max_coalesced_frames is used. - * @rx_max_coalesced_frames: How many packets to delay an RX interrupt - * after a packet arrives. If 0, only @rx_coalesce_usecs is used. + * @rx_max_coalesced_frames: Maximum number of packets to receive + * before an RX interrupt. If 0, only @rx_coalesce_usecs is used. * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that * this value applies while an IRQ is being serviced by the host. * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames, @@ -132,9 +132,9 @@ struct ethtool_eeprom { * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after * a packet is sent. If 0, only @tx_max_coalesced_frames * is used. - * @tx_max_coalesced_frames: How many packets to delay a TX interrupt - * after a packet is sent. If 0, only @tx_coalesce_usecs is - * used. + * @tx_max_coalesced_frames: Maximum number of packets to be sent + * before a TX interrupt. If 0, only @tx_coalesce_usecs is + * used. * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that * this value applies while an IRQ is being serviced by the host. * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames, @@ -149,21 +149,21 @@ struct ethtool_eeprom { * @pkt_rate_low: Threshold for low packet rate (packets per second). * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after * a packet arrives, when the packet rate is below @pkt_rate_low. - * @rx_max_coalesced_frames_low: How many packets to delay an RX interrupt - * after a packet arrives, when the packet rate is below @pkt_rate_low. + * @rx_max_coalesced_frames_low: Maximum number of packets to be received + * before an RX interrupt, when the packet rate is below @pkt_rate_low. * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after * a packet is sent, when the packet rate is below @pkt_rate_low. - * @tx_max_coalesced_frames_low: How many packets to delay a TX interrupt - * after a packet is sent, when the packet rate is below @pkt_rate_low. + * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before + * a TX interrupt, when the packet rate is below @pkt_rate_low. * @pkt_rate_high: Threshold for high packet rate (packets per second). * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after * a packet arrives, when the packet rate is above @pkt_rate_high. - * @rx_max_coalesced_frames_high: How many packets to delay an RX interrupt - * after a packet arrives, when the packet rate is above @pkt_rate_high. + * @rx_max_coalesced_frames_high: Maximum number of packets to be received + * before an RX interrupt, when the packet rate is above @pkt_rate_high. * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after * a packet is sent, when the packet rate is above @pkt_rate_high. - * @tx_max_coalesced_frames_high: How many packets to delay a TX interrupt - * after a packet is sent, when the packet rate is above @pkt_rate_high. + * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before + * a TX interrupt, when the packet rate is above @pkt_rate_high. * @rate_sample_interval: How often to do adaptive coalescing packet rate * sampling, measured in seconds. Must not be zero. * -- cgit v1.2.3 From acf42a2a575777681fee45ed59d7140be38e9142 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 15 Aug 2011 14:08:37 +0000 Subject: ethtool: Explicitly state the exit condition for interrupt coalescing Also explicitly state how to disable interrupt coalescing. Remove the now-redundant text from field descriptions. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/ethtool.h | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 18059ca41f09..42378b34ae8f 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -121,20 +121,18 @@ struct ethtool_eeprom { * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates * @cmd: ETHTOOL_{G,S}COALESCE * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after - * a packet arrives. If 0, only @rx_max_coalesced_frames is used. + * a packet arrives. * @rx_max_coalesced_frames: Maximum number of packets to receive - * before an RX interrupt. If 0, only @rx_coalesce_usecs is used. + * before an RX interrupt. * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that * this value applies while an IRQ is being serviced by the host. * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames, * except that this value applies while an IRQ is being serviced * by the host. * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after - * a packet is sent. If 0, only @tx_max_coalesced_frames - * is used. + * a packet is sent. * @tx_max_coalesced_frames: Maximum number of packets to be sent - * before a TX interrupt. If 0, only @tx_coalesce_usecs is - * used. + * before a TX interrupt. * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that * this value applies while an IRQ is being serviced by the host. * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames, @@ -167,8 +165,13 @@ struct ethtool_eeprom { * @rate_sample_interval: How often to do adaptive coalescing packet rate * sampling, measured in seconds. Must not be zero. * - * It is illegal to set both usecs and max frames to zero as this - * would cause interrupts to never be generated. + * Each pair of (usecs, max_frames) fields specifies this exit + * condition for interrupt coalescing: + * (usecs > 0 && time_since_first_completion >= usecs) || + * (max_frames > 0 && completed_frames >= max_frames) + * It is illegal to set both usecs and max_frames to zero as this + * would cause interrupts to never be generated. To disable + * coalescing, set usecs = 0 and max_frames = 1. * * Adaptive RX/TX coalescing is an algorithm implemented by some * drivers to improve latency under low packet rates and improve -- cgit v1.2.3 From a27fc96b0317b732b68b5f781bbdeb56ab5082a8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 15 Aug 2011 14:09:22 +0000 Subject: ethtool: Note common alternate exit condition for interrupt coalescing Many implementations ignore the value of max_frames and do not treat usecs == 0 as special. Document this as deprecated. Signed-off-by: Ben Hutchings Signed-off-by: David S. Miller --- include/linux/ethtool.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 42378b34ae8f..3829712ccc05 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -173,6 +173,12 @@ struct ethtool_eeprom { * would cause interrupts to never be generated. To disable * coalescing, set usecs = 0 and max_frames = 1. * + * Some implementations ignore the value of max_frames and use the + * condition: + * time_since_first_completion >= usecs + * This is deprecated. Drivers for hardware that does not support + * counting completions should validate that max_frames == !rx_usecs. + * * Adaptive RX/TX coalescing is an algorithm implemented by some * drivers to improve latency under low packet rates and improve * throughput under high packet rates. Some drivers only implement -- cgit v1.2.3 From bdeab991918663aed38757904219e8398214334c Mon Sep 17 00:00:00 2001 From: Tom Herbert Date: Sun, 14 Aug 2011 19:45:55 +0000 Subject: rps: Add flag to skb to indicate rxhash is based on L4 tuple The l4_rxhash flag was added to the skb structure to indicate that the rxhash value was computed over the 4 tuple for the packet which includes the port information in the encapsulated transport packet. This is used by the stack to preserve the rxhash value in __skb_rx_tunnel. Signed-off-by: Tom Herbert Signed-off-by: David S. Miller --- include/linux/skbuff.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 7b996ed86d5b..f902c331217b 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -414,6 +414,7 @@ struct sk_buff { __u8 ndisc_nodetype:2; #endif __u8 ooo_okay:1; + __u8 l4_rxhash:1; kmemcheck_bitfield_end(flags2); /* 0/13 bit hole */ @@ -572,11 +573,11 @@ extern unsigned int skb_find_text(struct sk_buff *skb, unsigned int from, unsigned int to, struct ts_config *config, struct ts_state *state); -extern __u32 __skb_get_rxhash(struct sk_buff *skb); +extern void __skb_get_rxhash(struct sk_buff *skb); static inline __u32 skb_get_rxhash(struct sk_buff *skb) { if (!skb->rxhash) - skb->rxhash = __skb_get_rxhash(skb); + __skb_get_rxhash(skb); return skb->rxhash; } -- cgit v1.2.3 From 01789349ee52e4a3faf376f1485303d9723c4f1f Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 16 Aug 2011 06:29:00 +0000 Subject: net: introduce IFF_UNICAST_FLT private flag Use IFF_UNICAST_FTL to find out if driver handles unicast address filtering. In case it does not, promisc mode is entered. Patch also fixes following drivers: stmmac, niu: support uc filtering and yet it propagated ndo_set_multicast_list bna, benet, pxa168_eth, ks8851, ks8851_mll, ksz884x : has set ndo_set_rx_mode but do not support uc filtering Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/if.h | 1 + include/linux/netdevice.h | 2 ++ 2 files changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/if.h b/include/linux/if.h index 03489ca92ded..db20bd4fd16b 100644 --- a/include/linux/if.h +++ b/include/linux/if.h @@ -78,6 +78,7 @@ * datapath port */ #define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing * skbs on transmit */ +#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */ #define IF_GET_IFACE 0x0001 /* for querying only */ #define IF_GET_PROTO 0x0002 diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index ddee79bb8f15..96e4f7e0ad68 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -723,6 +723,8 @@ struct netdev_tc_txq { * * void (*ndo_set_rx_mode)(struct net_device *dev); * This function is called device changes address list filtering. + * If driver handles unicast address filtering, it should set + * IFF_UNICAST_FLT to its priv_flags. * * void (*ndo_set_multicast_list)(struct net_device *dev); * This function is called when the multicast address list changes. -- cgit v1.2.3 From b81693d9149c598302e8eb9c20cb20330d922c8e Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Tue, 16 Aug 2011 06:29:02 +0000 Subject: net: remove ndo_set_multicast_list callback Remove no longer used operation. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- include/linux/netdevice.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 96e4f7e0ad68..125f9fb8ece4 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -726,9 +726,6 @@ struct netdev_tc_txq { * If driver handles unicast address filtering, it should set * IFF_UNICAST_FLT to its priv_flags. * - * void (*ndo_set_multicast_list)(struct net_device *dev); - * This function is called when the multicast address list changes. - * * int (*ndo_set_mac_address)(struct net_device *dev, void *addr); * This function is called when the Media Access Control address * needs to be changed. If this interface is not defined, the @@ -870,7 +867,6 @@ struct net_device_ops { void (*ndo_change_rx_flags)(struct net_device *dev, int flags); void (*ndo_set_rx_mode)(struct net_device *dev); - void (*ndo_set_multicast_list)(struct net_device *dev); int (*ndo_set_mac_address)(struct net_device *dev, void *addr); int (*ndo_validate_addr)(struct net_device *dev); -- cgit v1.2.3 From 4ca2462e94b3b0a2fdd3b777ff2bd9bcd82c6096 Mon Sep 17 00:00:00 2001 From: Changli Gao Date: Fri, 19 Aug 2011 07:26:44 -0700 Subject: net: add the comment for skb->l4_rxhash Signed-off-by: Changli Gao Signed-off-by: David S. Miller --- include/linux/skbuff.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index f902c331217b..ea0b37463860 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -322,6 +322,8 @@ typedef unsigned char *sk_buff_data_t; * @queue_mapping: Queue mapping for multiqueue devices * @ndisc_nodetype: router type (from link layer) * @ooo_okay: allow the mapping of a socket to a queue to be changed + * @l4_rxhash: indicate rxhash is a canonical 4-tuple hash over transport + * ports. * @dma_cookie: a cookie to one of several possible DMA operations * done by skb DMA functions * @secmark: security marking -- cgit v1.2.3 From c1407b6cb22245ae8653cfc195530a9b8eb52879 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Thu, 11 Aug 2011 16:17:41 +0200 Subject: wireless: Introduce defines for BAR TID_INFO & MULTI_TID fields While at it also fix the indention of the other IEEE80211_BAR_CTRL_ defines. Signed-off-by: Helmut Schaa Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 54c878960872..5286de5fe989 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -816,9 +816,11 @@ struct ieee80211_bar { } __attribute__((packed)); /* 802.11 BAR control masks */ -#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 -#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 - +#define IEEE80211_BAR_CTRL_ACK_POLICY_NORMAL 0x0000 +#define IEEE80211_BAR_CTRL_MULTI_TID 0x0002 +#define IEEE80211_BAR_CTRL_CBMTID_COMPRESSED_BA 0x0004 +#define IEEE80211_BAR_CTRL_TID_INFO_MASK 0xf000 +#define IEEE80211_BAR_CTRL_TID_INFO_SHIFT 12 #define IEEE80211_HT_MCS_MASK_LEN 10 -- cgit v1.2.3 From 984e5befbafe2799be28c2209226a82fb3a3be7a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Thu, 11 Aug 2011 23:46:44 +0200 Subject: bcma: implement BCM4331 workaround for external PA lines MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We need to disable ext. PA lines for reading SPROM. It's disabled by default, but this patch allows using bcma after loading wl, which leaves workaround enabled. Cc: Arend van Spriel Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/bcma/bcma_driver_chipcommon.h | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 6083725dd22e..a7ae33d06f24 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -283,6 +283,22 @@ #define BCMA_CC_PPL_PCHI_OFF 5 #define BCMA_CC_PPL_PCHI_MASK 0x0000003f +/* BCM4331 ChipControl numbers. */ +#define BCMA_CHIPCTL_4331_BT_COEXIST BIT(0) /* 0 disable */ +#define BCMA_CHIPCTL_4331_SECI BIT(1) /* 0 SECI is disabled (JATG functional) */ +#define BCMA_CHIPCTL_4331_EXT_LNA BIT(2) /* 0 disable */ +#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15 BIT(3) /* sprom/gpio13-15 mux */ +#define BCMA_CHIPCTL_4331_EXTPA_EN BIT(4) /* 0 ext pa disable, 1 ext pa enabled */ +#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS BIT(5) /* set drive out GPIO_CLK on sprom_cs pin */ +#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS BIT(6) /* use sprom_cs pin as PCIE mdio interface */ +#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5 BIT(7) /* aband extpa will be at gpio2/5 and sprom_dout */ +#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN BIT(8) /* override core control on pipe_AuxClkEnable */ +#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN BIT(9) /* override core control on pipe_AuxPowerDown */ +#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN BIT(10) /* pcie_auxclkenable */ +#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN BIT(11) /* pcie_pipe_pllpowerdown */ +#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4 BIT(16) /* enable bt_shd0 at gpio4 */ +#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5 BIT(17) /* enable bt_shd1 at gpio5 */ + /* Data for the PMU, if available. * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) */ @@ -342,6 +358,8 @@ extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); extern void bcma_chipco_resume(struct bcma_drv_cc *cc); +void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable); + extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks); -- cgit v1.2.3 From 6709a6d96e0f9b05a07999f720a15389ad242a4a Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Thu, 11 Aug 2011 19:35:11 -0700 Subject: ieee80211: introduce Self Protected Action codes 802.11s introduces a new action frame category, add action codes as well as an entry in ieee80211_mgmt. Signed-off-by: Thomas Pedersen Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 5286de5fe989..0750987f2a1d 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -749,6 +749,10 @@ struct ieee80211_mgmt { */ u8 variable[0]; } __attribute__((packed)) plink_action; + struct { + u8 action_code; + u8 variable[0]; + } __attribute__((packed)) self_prot; struct{ u8 action_code; u8 variable[0]; @@ -1311,6 +1315,16 @@ enum ieee80211_ht_actioncode { WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7, }; +/* Self Protected Action codes */ +enum ieee80211_self_protected_actioncode { + WLAN_SP_RESERVED = 0, + WLAN_SP_MESH_PEERING_OPEN = 1, + WLAN_SP_MESH_PEERING_CONFIRM = 2, + WLAN_SP_MESH_PEERING_CLOSE = 3, + WLAN_SP_MGK_INFORM = 4, + WLAN_SP_MGK_ACK = 5, +}; + /* Security key length */ enum ieee80211_key_len { WLAN_KEY_LEN_WEP40 = 5, -- cgit v1.2.3 From 8db098507c5cbe499061d0f6aea426a36e7c72d7 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Fri, 12 Aug 2011 20:01:00 -0700 Subject: mac80211: update mesh peering frame format This patch updates the mesh peering frames to the format specified in the recently ratified 802.11s standard. Several changes took place to make this happen: - Change RX path to handle new self-protected frames - Add new Peering management IE - Remove old Peer Link IE - Remove old plink_action field in ieee80211_mgmt header These changes by themselves would either break peering, or work by coincidence, so squash them all into this patch. Signed-off-by: Thomas Pedersen Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 18 ------------------ 1 file changed, 18 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 0750987f2a1d..819954a607f1 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -736,19 +736,6 @@ struct ieee80211_mgmt { __le16 params; __le16 reason_code; } __attribute__((packed)) delba; - struct{ - u8 action_code; - /* capab_info for open and confirm, - * reason for close - */ - __le16 aux; - /* Followed in plink_confirm by status - * code, AID and supported rates, - * and directly by supported rates in - * plink_open and plink_close - */ - u8 variable[0]; - } __attribute__((packed)) plink_action; struct { u8 action_code; u8 variable[0]; @@ -1200,11 +1187,6 @@ enum ieee80211_eid { WLAN_EID_MESH_ID = 114, WLAN_EID_LINK_METRIC_REPORT = 115, WLAN_EID_CONGESTION_NOTIFICATION = 116, - /* Note that the Peer Link IE has been replaced with the similar - * Peer Management IE. We will keep the former definition until mesh - * code is changed to comply with latest 802.11s drafts. - */ - WLAN_EID_PEER_LINK = 55, /* no longer in 802.11s drafts */ WLAN_EID_PEER_MGMT = 117, WLAN_EID_CHAN_SWITCH_PARAM = 118, WLAN_EID_MESH_AWAKE_WINDOW = 119, -- cgit v1.2.3 From 36c704fded53ee0d6866e8ae7f7e3d29cd4315b9 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Thu, 11 Aug 2011 19:35:14 -0700 Subject: ieee80211: add mesh action codes Signed-off-by: Thomas Pedersen Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 15 +