From 5a433b3ad497120d80f1045d37bd1a9ce897388f Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Mon, 21 Apr 2008 10:41:10 -0700 Subject: mac80211: remove unnecessary byteshifts in frame control testing Byteswap the constants rather than the frame_control member. Signed-off-by: Harvey Harrison Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 0b5e03eae6d2..a9102bc78b61 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -552,16 +552,17 @@ enum ieee80211_back_parties { */ static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr) { - u8 *raw = (u8 *) hdr; - u8 tofrom = (*(raw+1)) & 3; /* get the TODS and FROMDS bits */ - - switch (tofrom) { - case 2: - return hdr->addr3; - case 3: - return hdr->addr4; + __le16 fc = hdr->frame_control; + fc &= cpu_to_le16(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS); + + switch (fc) { + case __constant_cpu_to_le16(IEEE80211_FCTL_FROMDS): + return hdr->addr3; + case __constant_cpu_to_le16(IEEE80211_FCTL_TODS|IEEE80211_FCTL_FROMDS): + return hdr->addr4; + default: + return hdr->addr2; } - return hdr->addr2; } /** @@ -577,12 +578,13 @@ static inline u8 *ieee80211_get_SA(struct ieee80211_hdr *hdr) */ static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr) { - u8 *raw = (u8 *) hdr; - u8 to_ds = (*(raw+1)) & 1; /* get the TODS bit */ + __le16 fc = hdr->frame_control; + fc &= cpu_to_le16(IEEE80211_FCTL_TODS); - if (to_ds) + if (fc) return hdr->addr3; - return hdr->addr1; + else + return hdr->addr1; } /** @@ -595,8 +597,8 @@ static inline u8 *ieee80211_get_DA(struct ieee80211_hdr *hdr) */ static inline int ieee80211_get_morefrag(struct ieee80211_hdr *hdr) { - return (le16_to_cpu(hdr->frame_control) & - IEEE80211_FCTL_MOREFRAGS) != 0; + __le16 fc = hdr->frame_control; + return !!(fc & cpu_to_le16(IEEE80211_FCTL_MOREFRAGS)); } #endif /* IEEE80211_H */ -- cgit v1.2.3 From 3e582db0783872a645f5236ef142be6579b300ad Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 6 May 2008 12:11:29 -0400 Subject: Input: gameport - remove rescan/reconnect facilities They have never been used and are unlikely to be used in the future so remove them altogether. Reported-by: Adrian Bunk Signed-off-by: Dmitry Torokhov --- include/linux/gameport.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/gameport.h b/include/linux/gameport.h index afad95272841..f64e29c0ef3f 100644 --- a/include/linux/gameport.h +++ b/include/linux/gameport.h @@ -68,7 +68,6 @@ struct gameport_driver { int gameport_open(struct gameport *gameport, struct gameport_driver *drv, int mode); void gameport_close(struct gameport *gameport); -void gameport_rescan(struct gameport *gameport); #if defined(CONFIG_GAMEPORT) || (defined(MODULE) && defined(CONFIG_GAMEPORT_MODULE)) -- cgit v1.2.3 From ccd3474569a101914444dc37cc108eec22578999 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Tue, 6 May 2008 12:11:39 -0400 Subject: Input: libps2 - remove delayed command execution Delayed command execution is not used by anyone so let's remove it. Reported-by: Adrian Bunk Signed-off-by: Dmitry Torokhov --- include/linux/libps2.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/libps2.h b/include/linux/libps2.h index f6f301e2b0f5..afc413369101 100644 --- a/include/linux/libps2.h +++ b/include/linux/libps2.h @@ -43,7 +43,6 @@ void ps2_init(struct ps2dev *ps2dev, struct serio *serio); int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout); void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout); int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command); -int ps2_schedule_command(struct ps2dev *ps2dev, unsigned char *param, int command); int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data); int ps2_handle_response(struct ps2dev *ps2dev, unsigned char data); void ps2_cmd_aborted(struct ps2dev *ps2dev); -- cgit v1.2.3 From 253b00f1e6619055d524188f254ccb951bffce5d Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 7 May 2008 11:15:23 -0400 Subject: Input: remove unused defines Remove unused to_dev, to_handler, to_handle from include/linux/input.h Move to_handle_h from include/linux/input.h to drivers/char/keyboard.c Signed-off-by: Joe Perches Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- include/linux/input.h | 5 ----- 1 file changed, 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/input.h b/include/linux/input.h index 28a094fcfe20..eff711d8a459 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -1213,11 +1213,6 @@ struct input_handle { struct list_head h_node; }; -#define to_dev(n) container_of(n, struct input_dev, node) -#define to_handler(n) container_of(n, struct input_handler, node) -#define to_handle(n) container_of(n, struct input_handle, d_node) -#define to_handle_h(n) container_of(n, struct input_handle, h_node) - struct input_dev *input_allocate_device(void); void input_free_device(struct input_dev *dev); -- cgit v1.2.3 From a33466e31213cd7c46696160d3db78680b58f6a3 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Wed, 7 May 2008 16:30:15 -0400 Subject: Input: gpio-keys debouncing support Signed-off-by: Dmitry Baryshkov Signed-off-by: Dmitry Torokhov --- include/linux/gpio_keys.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h index c6d3a9de5634..ec6ecd74781d 100644 --- a/include/linux/gpio_keys.h +++ b/include/linux/gpio_keys.h @@ -9,6 +9,7 @@ struct gpio_keys_button { char *desc; int type; /* input event type (EV_KEY, EV_SW) */ int wakeup; /* configure the button as a wake-up source */ + int debounce_interval; /* debounce ticks interval in msecs */ }; struct gpio_keys_platform_data { -- cgit v1.2.3 From 48adcf148c83faa41999fb0b3524299c4e160fd9 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 20 May 2008 01:03:16 +0300 Subject: [CPUFREQ] cpufreq: remove CVS keywords This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk Signed-off-by: Dave Jones --- include/linux/cpufreq.h | 3 --- 1 file changed, 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index e7e91dbfde0f..2270ca5ec631 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -4,9 +4,6 @@ * Copyright (C) 2001 Russell King * (C) 2002 - 2003 Dominik Brodowski * - * - * $Id: cpufreq.h,v 1.36 2003/01/20 17:31:48 db Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. -- cgit v1.2.3 From d1659fcc59b21ec442564fedb67a5ad371f82380 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 20 May 2008 12:17:39 -0400 Subject: Input: remove CVS keywords This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk Signed-off-by: Dmitry Torokhov --- include/linux/joystick.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/joystick.h b/include/linux/joystick.h index e2d3a18af456..b5e051295a67 100644 --- a/include/linux/joystick.h +++ b/include/linux/joystick.h @@ -2,8 +2,6 @@ #define _LINUX_JOYSTICK_H /* - * $Id: joystick.h,v 1.3 2000/11/30 11:07:05 vojtech Exp $ - * * Copyright (C) 1996-2000 Vojtech Pavlik * * Sponsored by SuSE -- cgit v1.2.3 From 59f0c4523fdea865fab7d69d878269992a9d08dd Mon Sep 17 00:00:00 2001 From: Allan Stephens Date: Wed, 21 May 2008 14:52:30 -0700 Subject: tipc: Fix skb_under_panic when configuring TIPC without privileges This patch prevents a TIPC configuration command requiring network administrator privileges from triggering an skbuff underrun if it is issued by a process lacking those privileges. The revised error handling code avoids the use of a potentially uninitialized global variable by transforming the unauthorized command into a new command, then following the standard command processing path to generate the required error message. Signed-off-by: Allan Stephens Signed-off-by: David S. Miller --- include/linux/tipc_config.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/tipc_config.h b/include/linux/tipc_config.h index b0c916d1f375..2bc6fa4adeb5 100644 --- a/include/linux/tipc_config.h +++ b/include/linux/tipc_config.h @@ -2,7 +2,7 @@ * include/linux/tipc_config.h: Include file for TIPC configuration interface * * Copyright (c) 2003-2006, Ericsson AB - * Copyright (c) 2005, Wind River Systems + * Copyright (c) 2005-2007, Wind River Systems * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -135,6 +135,14 @@ #define TIPC_CMD_SET_MAX_SLAVES 0x800A /* tx unsigned, rx none */ #define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */ +/* + * Reserved commands: + * May not be issued by any process. + * Used internally by TIPC. + */ + +#define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ + /* * TLV types defined for TIPC */ -- cgit v1.2.3 From edcdf8b21ac920e06b4180246123fe43b022e020 Mon Sep 17 00:00:00 2001 From: Ron Rindjunsky Date: Thu, 15 May 2008 13:53:55 +0800 Subject: mac80211: separate Tx and Rx MCS when configuring HT This patch follows the 11n spec in separation between Tx and Rx MCS capabilities. Up until now, when configuring the HT possible set of Tx MCS only Rx MCS were considered, assuming they are the same as the Tx MCS. This patch fixed this by looking at low level driver Tx capabilities. Signed-off-by: Ron Rindjunsky Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index a9102bc78b61..3c2ac0c37aa8 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -306,8 +306,18 @@ struct ieee80211_ht_addt_info { #define IEEE80211_HT_CAP_SGI_40 0x0040 #define IEEE80211_HT_CAP_DELAY_BA 0x0400 #define IEEE80211_HT_CAP_MAX_AMSDU 0x0800 +/* 802.11n HT capability AMPDU settings */ #define IEEE80211_HT_CAP_AMPDU_FACTOR 0x03 #define IEEE80211_HT_CAP_AMPDU_DENSITY 0x1C +/* 802.11n HT capability MSC set */ +#define IEEE80211_SUPP_MCS_SET_UEQM 4 +#define IEEE80211_HT_CAP_MAX_STREAMS 4 +#define IEEE80211_SUPP_MCS_SET_LEN 10 +/* maximum streams the spec allows */ +#define IEEE80211_HT_CAP_MCS_TX_DEFINED 0x01 +#define IEEE80211_HT_CAP_MCS_TX_RX_DIFF 0x02 +#define IEEE80211_HT_CAP_MCS_TX_STREAMS 0x0C +#define IEEE80211_HT_CAP_MCS_TX_UEQM 0x10 /* 802.11n HT IE masks */ #define IEEE80211_HT_IE_CHA_SEC_OFFSET 0x03 #define IEEE80211_HT_IE_CHA_WIDTH 0x04 @@ -316,10 +326,10 @@ struct ieee80211_ht_addt_info { #define IEEE80211_HT_IE_NON_HT_STA_PRSNT 0x0010 /* MIMO Power Save Modes */ -#define WLAN_HT_CAP_MIMO_PS_STATIC 0 -#define WLAN_HT_CAP_MIMO_PS_DYNAMIC 1 -#define WLAN_HT_CAP_MIMO_PS_INVALID 2 -#define WLAN_HT_CAP_MIMO_PS_DISABLED 3 +#define WLAN_HT_CAP_MIMO_PS_STATIC 0 +#define WLAN_HT_CAP_MIMO_PS_DYNAMIC 1 +#define WLAN_HT_CAP_MIMO_PS_INVALID 2 +#define WLAN_HT_CAP_MIMO_PS_DISABLED 3 /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 -- cgit v1.2.3 From 57e6983cbde91b4569b4014b933f3a16e12b99fd Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Sun, 25 May 2008 23:48:31 -0700 Subject: tg3: Add 5785 ASIC revision This patch added the 5785 device ID and ASIC revision to the code. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: Benjamin Li Signed-off-by: David S. Miller --- include/linux/pci_ids.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index cf6dbd759395..72c038560e7d 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1979,6 +1979,7 @@ #define PCI_DEVICE_ID_TIGON3_5787M 0x1693 #define PCI_DEVICE_ID_TIGON3_5782 0x1696 #define PCI_DEVICE_ID_TIGON3_5784 0x1698 +#define PCI_DEVICE_ID_TIGON3_5785 0x1699 #define PCI_DEVICE_ID_TIGON3_5786 0x169a #define PCI_DEVICE_ID_TIGON3_5787 0x169b #define PCI_DEVICE_ID_TIGON3_5788 0x169c -- cgit v1.2.3 From a9daf36746b1fb5c2db8d164ca70c30c63a0d7b2 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Sun, 25 May 2008 23:49:44 -0700 Subject: tg3: Add shmem options. This patch adds some options obtained through shared memory. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: Benjamin Li Signed-off-by: David S. Miller --- include/linux/brcmphy.h | 6 ++++++ 1 file changed, 6 insertions(+) create mode 100644 include/linux/brcmphy.h (limited to 'include/linux') diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h new file mode 100644 index 000000000000..9b64b6d67873 --- /dev/null +++ b/include/linux/brcmphy.h @@ -0,0 +1,6 @@ +#define PHY_BRCM_WIRESPEED_ENABLE 0x00000001 +#define PHY_BRCM_AUTO_PWRDWN_ENABLE 0x00000002 +#define PHY_BRCM_APD_CLK125_ENABLE 0x00000004 +#define PHY_BRCM_STD_IBND_DISABLE 0x00000008 +#define PHY_BRCM_EXT_IBND_RX_ENABLE 0x00000010 +#define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00000020 -- cgit v1.2.3 From 75a9cd524c6bb441c61c85bae7020ce5e8b2e807 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 29 May 2008 01:43:48 -0700 Subject: wanrouter: Fix ioctl handler declaration. Signed-off-by: David S. Miller --- include/linux/wanrouter.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/wanrouter.h b/include/linux/wanrouter.h index 3add87465b1f..e0aa39612eba 100644 --- a/include/linux/wanrouter.h +++ b/include/linux/wanrouter.h @@ -522,7 +522,7 @@ extern int wanrouter_proc_init(void); extern void wanrouter_proc_cleanup(void); extern int wanrouter_proc_add(struct wan_device *wandev); extern int wanrouter_proc_delete(struct wan_device *wandev); -extern int wanrouter_ioctl( struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg); +extern long wanrouter_ioctl(struct file *file, unsigned int cmd, unsigned long arg); /* Public Data */ /* list of registered devices */ -- cgit v1.2.3 From b79eeeb9e48457579cb742cd02e162fcd673c4a3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Thu, 29 May 2008 03:25:23 -0700 Subject: tcp: Reorganize tcp_sock to fill 64-bit holes & improve locality MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I tried to group recovery related fields nearby (non-CA_Open related variables, to be more accurate) so that one to three cachelines would not be necessary in CA_Open. These are now contiguously deployed: struct sk_buff_head out_of_order_queue; /* 1968 80 */ /* --- cacheline 32 boundary (2048 bytes) --- */ struct tcp_sack_block duplicate_sack[1]; /* 2048 8 */ struct tcp_sack_block selective_acks[4]; /* 2056 32 */ struct tcp_sack_block recv_sack_cache[4]; /* 2088 32 */ /* --- cacheline 33 boundary (2112 bytes) was 8 bytes ago --- */ struct sk_buff * highest_sack; /* 2120 8 */ int lost_cnt_hint; /* 2128 4 */ int retransmit_cnt_hint; /* 2132 4 */ u32 lost_retrans_low; /* 2136 4 */ u8 reordering; /* 2140 1 */ u8 keepalive_probes; /* 2141 1 */ /* XXX 2 bytes hole, try to pack */ u32 prior_ssthresh; /* 2144 4 */ u32 high_seq; /* 2148 4 */ u32 retrans_stamp; /* 2152 4 */ u32 undo_marker; /* 2156 4 */ int undo_retrans; /* 2160 4 */ u32 total_retrans; /* 2164 4 */ ...and they're then followed by URG slowpath & keepalive related variables. Head of the out_of_order_queue always needed for empty checks, if that's empty (and TCP is in CA_Open), following ~200 bytes (in 64-bit) shouldn't be necessary for anything. If only OFO queue exists but TCP is in CA_Open, selective_acks (and possibly duplicate_sack) are necessary besides the out_of_order_queue but the rest of the block again shouldn't be (ie., the other direction had losses). As the cacheline boundaries depend on many factors in the preceeding stuff, trying to align considering them doesn't make too much sense. Commented one ordering hazard. There are number of low utilized u8/16s that could be combined get 2 bytes less in total so that the hole could be made to vanish (includes at least ecn_flags, urg_data, urg_mode, frto_counter, nonagle). Signed-off-by: Ilpo Järvinen Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/tcp.h | 50 +++++++++++++++++++++++++------------------------- 1 file changed, 25 insertions(+), 25 deletions(-) (limited to 'include/linux') diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 18e62e3d406f..9881295f3857 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -296,10 +296,9 @@ struct tcp_sock { u32 rcv_ssthresh; /* Current window clamp */ u32 frto_highmark; /* snd_nxt when RTO occurred */ - u8 reordering; /* Packet reordering metric. */ + u16 advmss; /* Advertised MSS */ u8 frto_counter; /* Number of new acks after RTO */ u8 nonagle; /* Disable Nagle algorithm? */ - u8 keepalive_probes; /* num of allowed keep alive probes */ /* RTT measurement */ u32 srtt; /* smoothed round trip time << 3 */ @@ -310,6 +309,10 @@ struct tcp_sock { u32 packets_out; /* Packets which are "in flight" */ u32 retrans_out; /* Retransmitted packets out */ + + u16 urg_data; /* Saved octet of OOB data and control flags */ + u8 urg_mode; /* In urgent mode */ + u8 ecn_flags; /* ECN status bits. */ /* * Options received (usually on last packet, some only on SYN packets). */ @@ -325,13 +328,24 @@ struct tcp_sock { u32 snd_cwnd_used; u32 snd_cwnd_stamp; - struct sk_buff_head out_of_order_queue; /* Out of order segments go here */ - u32 rcv_wnd; /* Current receiver window */ u32 write_seq; /* Tail(+1) of data held in tcp send buffer */ u32 pushed_seq; /* Last pushed seq, required to talk to windows */ + u32 lost_out; /* Lost packets */ + u32 sacked_out; /* SACK'd packets */ + u32 fackets_out; /* FACK'd packets */ + u32 tso_deferred; + u32 bytes_acked; /* Appropriate Byte Counting - RFC3465 */ -/* SACKs data */ + /* from STCP, retrans queue hinting */ + struct sk_buff* lost_skb_hint; + struct sk_buff *scoreboard_skb_hint; + struct sk_buff *retransmit_skb_hint; + struct sk_buff *forward_skb_hint; + + struct sk_buff_head out_of_order_queue; /* Out of order segments go here */ + + /* SACKs data, these 2 need to be together (see tcp_build_and_update_options) */ struct tcp_sack_block duplicate_sack[1]; /* D-SACK block */ struct tcp_sack_block selective_acks[4]; /* The SACKS themselves*/ @@ -342,23 +356,14 @@ struct tcp_sock { * sacked_out > 0) */ - /* from STCP, retrans queue hinting */ - struct sk_buff* lost_skb_hint; - - struct sk_buff *scoreboard_skb_hint; - struct sk_buff *retransmit_skb_hint; - struct sk_buff *forward_skb_hint; - int lost_cnt_hint; int retransmit_cnt_hint; u32 lost_retrans_low; /* Sent seq after any rxmit (lowest) */ - u16 advmss; /* Advertised MSS */ + u8 reordering; /* Packet reordering metric. */ + u8 keepalive_probes; /* num of allowed keep alive probes */ u32 prior_ssthresh; /* ssthresh saved at recovery start */ - u32 lost_out; /* Lost packets */ - u32 sacked_out; /* SACK'd packets */ - u32 fackets_out; /* FACK'd packets */ u32 high_seq; /* snd_nxt at onset of congestion */ u32 retrans_stamp; /* Timestamp of the last retransmit, @@ -366,25 +371,18 @@ struct tcp_sock { * the first SYN. */ u32 undo_marker; /* tracking retrans started here. */ int undo_retrans; /* number of undoable retransmissions. */ + u32 total_retrans; /* Total retransmits for entire connection */ + u32 urg_seq; /* Seq of received urgent pointer */ - u16 urg_data; /* Saved octet of OOB data and control flags */ - u8 urg_mode; /* In urgent mode */ - u8 ecn_flags; /* ECN status bits. */ u32 snd_up; /* Urgent pointer */ - u32 total_retrans; /* Total retransmits for entire connection */ - u32 bytes_acked; /* Appropriate Byte Counting - RFC3465 */ - unsigned int keepalive_time; /* time before keep alive takes place */ unsigned int keepalive_intvl; /* time interval between keep alive probes */ - int linger2; struct tcp_deferred_accept_info defer_tcp_accept; unsigned long last_synq_overflow; - u32 tso_deferred; - /* Receiver side RTT estimation */ struct { u32 rtt; @@ -412,6 +410,8 @@ struct tcp_sock { /* TCP MD5 Signagure Option information */ struct tcp_md5sig_info *md5sig_info; #endif + + int linger2; }; static inline struct tcp_sock *tcp_sk(const struct sock *sk) -- cgit v1.2.3 From f6d65610df3bd4e7138da03aec391224219df135 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 2 Jun 2008 00:39:45 -0400 Subject: Input: atkbd - use ushort instead of uchar keymap Since some of the keycodes defined in input.h have values greater than 255 we should use unsigned shorts in keymaps. Tested-by: Carlos Corbacho Signed-off-by: Dmitry Torokhov --- include/linux/input.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/input.h b/include/linux/input.h index eff711d8a459..af9c6314153b 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -373,6 +373,8 @@ struct input_absinfo { #define KEY_WIMAX 246 +/* Range 248 - 255 is reserved for special needs of AT keyboard driver */ + #define BTN_MISC 0x100 #define BTN_0 0x100 #define BTN_1 0x101 -- cgit v1.2.3 From 9306102ea5696a3815f8d24ac0c0fbd1e19be7d3 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 29 May 2008 16:35:23 +0800 Subject: mac80211: allow disable FAT in specific configurations This patch allows to disable FAT channel in specific configurations. For example the configuration (8, +1), (primary channel 8, extension channel 12) isn't permitted in U.S., but (8, -1), (primary channel 8, extension channel 4) is. When FAT channel configuration is not permitted, FAT channel should be reported as not supported in the capabilities of the HT IE in association request. And sssociation is performed on 20Mhz channel. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville --- include/linux/ieee80211.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 3c2ac0c37aa8..9300f37cd7e8 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -320,6 +320,8 @@ struct ieee80211_ht_addt_info { #define IEEE80211_HT_CAP_MCS_TX_UEQM 0x10 /* 802.11n HT IE masks */ #define IEEE80211_HT_IE_CHA_SEC_OFFSET 0x03 +#define IEEE80211_HT_IE_CHA_SEC_ABOVE 0x01 +#define IEEE80211_HT_IE_CHA_SEC_BELOW 0x03 #define IEEE80211_HT_IE_CHA_WIDTH 0x04 #define IEEE80211_HT_IE_HT_PROTECTION 0x0003 #define IEEE80211_HT_IE_NON_GF_STA_PRSNT 0x0004 -- cgit v1.2.3 From ba569b4c68f11906da2996ee252bcff0df61cb90 Mon Sep 17 00:00:00 2001 From: Masakazu Mokuno Date: Fri, 30 May 2008 16:52:23 +0900 Subject: WEXT: Add support for passing PMK and capability flags to WEXT This defines the flags for setting the PMK to the driver and the capability flag for this so that the user space program can figure out whether the target driver wants to do 4-way hand shake by itself and pass the PMK which is needed before 4-way handshake to the driver. Signed-off-by: Masakazu Mokuno Signed-off-by: John W. Linville --- include/linux/wireless.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/wireless.h b/include/linux/wireless.h index 0a9b5b41ed67..4a95a0e5eeca 100644 --- a/include/linux/wireless.h +++ b/include/linux/wireless.h @@ -611,6 +611,7 @@ #define IW_ENCODE_ALG_WEP 1 #define IW_ENCODE_ALG_TKIP 2 #define IW_ENCODE_ALG_CCMP 3 +#define IW_ENCODE_ALG_PMK 4 /* struct iw_encode_ext ->ext_flags */ #define IW_ENCODE_EXT_TX_SEQ_VALID 0x00000001 #define IW_ENCODE_EXT_RX_SEQ_VALID 0x00000002 @@ -630,6 +631,7 @@ #define IW_ENC_CAPA_WPA2 0x00000002 #define IW_ENC_CAPA_CIPHER_TKIP 0x00000004 #define IW_ENC_CAPA_CIPHER_CCMP 0x00000008 +#define IW_ENC_CAPA_4WAY_HANDSHAKE 0x00000010 /* Event capability macros - in (struct iw_range *)->event_capa * Because we have more than 32 possible events, we use an array of -- cgit v1.2.3 From 9457afee85e0dfc2b5075a391d6f34463b4c2b90 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Thu, 5 Jun 2008 11:23:39 -0700 Subject: netlink: Remove nonblock parameter from netlink_attachskb Signed-off-by: Denis V. Lunev Signed-off-by: David S. Miller --- include/linux/netlink.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netlink.h b/include/linux/netlink.h index bec1062a25a1..9ff1b54908f3 100644 --- a/include/linux/netlink.h +++ b/include/linux/netlink.h @@ -193,7 +193,7 @@ extern int netlink_unregister_notifier(struct notifier_block *nb); /* finegrained unicast helpers: */ struct sock *netlink_getsockbyfilp(struct file *filp); -int netlink_attachskb(struct sock *sk, struct sk_buff *skb, int nonblock, +int netlink_attachskb(struct sock *sk, struct sk_buff *skb, long *timeo, struct sock *ssk); void netlink_detachskb(struct sock *sk, struct sk_buff *skb); int netlink_sendskb(struct sock *sk, struct sk_buff *skb); -- cgit v1.2.3 From 93f65158723ceb7078ee9a0fd4830c0de00f4b9e Mon Sep 17 00:00:00 2001 From: Kuo-lang Tseng Date: Mon, 9 Jun 2008 15:55:45 -0700 Subject: netfilter: ebtables: add IPv6 support It implements matching functions for IPv6 address & traffic class (merged from the patch sent by Jan Engelhardt [jengelh@computergmbh.de] http://marc.info/?l=netfilter-devel&m=120182168424052&w=2), protocol, and layer-4 port id. Corresponding watcher logging function is also added for IPv6. Signed-off-by: Kuo-lang Tseng Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_bridge/ebt_ip6.h | 40 ++++++++++++++++++++++++++++++++ include/linux/netfilter_bridge/ebt_log.h | 3 ++- 2 files changed, 42 insertions(+), 1 deletion(-) create mode 100644 include/linux/netfilter_bridge/ebt_ip6.h (limited to 'include/linux') diff --git a/include/linux/netfilter_bridge/ebt_ip6.h b/include/linux/netfilter_bridge/ebt_ip6.h new file mode 100644 index 000000000000..2273c3ae33ca --- /dev/null +++ b/include/linux/netfilter_bridge/ebt_ip6.h @@ -0,0 +1,40 @@ +/* + * ebt_ip6 + * + * Authors: + * Kuo-Lang Tseng + * Manohar Castelino + * + * Jan 11, 2008 + * + */ + +#ifndef __LINUX_BRIDGE_EBT_IP6_H +#define __LINUX_BRIDGE_EBT_IP6_H + +#define EBT_IP6_SOURCE 0x01 +#define EBT_IP6_DEST 0x02 +#define EBT_IP6_TCLASS 0x04 +#define EBT_IP6_PROTO 0x08 +#define EBT_IP6_SPORT 0x10 +#define EBT_IP6_DPORT 0x20 +#define EBT_IP6_MASK (EBT_IP6_SOURCE | EBT_IP6_DEST | EBT_IP6_TCLASS |\ + EBT_IP6_PROTO | EBT_IP6_SPORT | EBT_IP6_DPORT) +#define EBT_IP6_MATCH "ip6" + +/* the same values are used for the invflags */ +struct ebt_ip6_info +{ + struct in6_addr saddr; + struct in6_addr daddr; + struct in6_addr smsk; + struct in6_addr dmsk; + uint8_t tclass; + uint8_t protocol; + uint8_t bitmask; + uint8_t invflags; + uint16_t sport[2]; + uint16_t dport[2]; +}; + +#endif diff --git a/include/linux/netfilter_bridge/ebt_log.h b/include/linux/netfilter_bridge/ebt_log.h index 96e231ae7554..b76e653157e5 100644 --- a/include/linux/netfilter_bridge/ebt_log.h +++ b/include/linux/netfilter_bridge/ebt_log.h @@ -4,7 +4,8 @@ #define EBT_LOG_IP 0x01 /* if the frame is made by ip, log the ip information */ #define EBT_LOG_ARP 0x02 #define EBT_LOG_NFLOG 0x04 -#define EBT_LOG_MASK (EBT_LOG_IP | EBT_LOG_ARP) +#define EBT_LOG_IP6 0x08 +#define EBT_LOG_MASK (EBT_LOG_IP | EBT_LOG_ARP | EBT_LOG_IP6) #define EBT_LOG_PREFIX_SIZE 30 #define EBT_LOG_WATCHER "log" -- cgit v1.2.3 From a258860e01b80e8f554a4ab1a6c95e6042eb8b73 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 9 Jun 2008 15:56:39 -0700 Subject: netfilter: ctnetlink: add full support for SCTP to ctnetlink This patch adds full support for SCTP to ctnetlink. This includes three new attributes: state, original vtag and reply vtag. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter/nfnetlink_conntrack.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index 0a383ac083cb..759bc043dc65 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -81,6 +81,7 @@ enum ctattr_protoinfo { CTA_PROTOINFO_UNSPEC, CTA_PROTOINFO_TCP, CTA_PROTOINFO_DCCP, + CTA_PROTOINFO_SCTP, __CTA_PROTOINFO_MAX }; #define CTA_PROTOINFO_MAX (__CTA_PROTOINFO_MAX - 1) @@ -103,6 +104,15 @@ enum ctattr_protoinfo_dccp { }; #define CTA_PROTOINFO_DCCP_MAX (__CTA_PROTOINFO_DCCP_MAX - 1) +enum ctattr_protoinfo_sctp { + CTA_PROTOINFO_SCTP_UNSPEC, + CTA_PROTOINFO_SCTP_STATE, + CTA_PROTOINFO_SCTP_VTAG_ORIGINAL, + CTA_PROTOINFO_SCTP_VTAG_REPLY, + __CTA_PROTOINFO_SCTP_MAX +}; +#define CTA_PROTOINFO_SCTP_MAX (__CTA_PROTOINFO_SCTP_MAX - 1) + enum ctattr_counters { CTA_COUNTERS_UNSPEC, CTA_COUNTERS_PACKETS, /* old 64bit counters */ -- cgit v1.2.3 From 560ee653b67074b805f1b661988a72a0e58811a5 Mon Sep 17 00:00:00 2001 From: James Morris Date: Mon, 9 Jun 2008 15:57:24 -0700 Subject: netfilter: ip_tables: add iptables security table for mandatory access control rules The following patch implements a new "security" table for iptables, so that MAC (SELinux etc.) networking rules can be managed separately to standard DAC rules. This is to help with distro integration of the new secmark-based network controls, per various previous discussions. The need for a separate table arises from the fact that existing tools and usage of iptables will likely clash with centralized MAC policy management. The SECMARK and CONNSECMARK targets will still be valid in the mangle table to prevent breakage of existing users. Signed-off-by: James Morris Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_ipv4.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netfilter_ipv4.h b/include/linux/netfilter_ipv4.h index 650318b0c405..29c7727ff0e8 100644 --- a/include/linux/netfilter_ipv4.h +++ b/include/linux/netfilter_ipv4.h @@ -60,6 +60,7 @@ enum nf_ip_hook_priorities { NF_IP_PRI_MANGLE = -150, NF_IP_PRI_NAT_DST = -100, NF_IP_PRI_FILTER = 0, + NF_IP_PRI_SECURITY = 50, NF_IP_PRI_NAT_SRC = 100, NF_IP_PRI_SELINUX_LAST = 225, NF_IP_PRI_CONNTRACK_CONFIRM = INT_MAX, -- cgit v1.2.3 From 17e6e59f0a1d7188d783c15dc3ccebd95a0840cd Mon Sep 17 00:00:00 2001 From: James Morris Date: Mon, 9 Jun 2008 15:58:05 -0700 Subject: netfilter: ip6_tables: add ip6tables security table This is a port of the IPv4 security table for IPv6. Signed-off-by: James Morris Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller --- include/linux/netfilter_ipv6.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netfilter_ipv6.h b/include/linux/netfilter_ipv6.h index 3475a65dae9b..fd50988b83ec 100644 --- a/include/linux/netfilter_ipv6.h +++ b/include/linux/netfilter_ipv6.h @@ -64,6 +64,7 @@ enum nf_ip6_hook_priorities { NF_IP6_PRI_MANGLE = -150, NF_IP6_PRI_NAT_DST = -100, NF_IP6_PRI_FILTER = 0, + NF_IP6_PRI_SECURITY = 50, NF_IP6_PRI_NAT_SRC = 100, NF_IP6_PRI_SELINUX_LAST = 225, NF_IP6_PRI_LAST = INT_MAX, -- cgit v1.2.3 From 19792a0859f96e9fc8ce87d97b269bcb895389e5 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 5 May 2008 21:25:47 +0300 Subject: PCI: drivers/pci/pci.c: add prototypes This patch adds prototypes for pcibios_disable_device() and pcibios_set_pcie_reset_state() in include/linux/pci.h While I was at it, I also removed the unneeded "extern" from the prototype of pcibios_add_platform_entries(). Signed-off-by: Adrian Bunk Signed-off-by: Jesse Barnes --- include/linux/pci.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 509159bcd4e7..aaa9f333fb44 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1059,7 +1059,10 @@ extern int pci_pci_problems; extern unsigned long pci_cardbus_io_size; extern unsigned long pci_cardbus_mem_size; -extern int pcibios_add_platform_entries(struct pci_dev *dev); +int pcibios_add_platform_entries(struct pci_dev *dev); +void pcibios_disable_device(struct pci_dev *dev); +int pcibios_set_pcie_reset_state(struct pci_dev *dev, + enum pcie_reset_state state); #ifdef CONFIG_PCI_MMCONFIG extern void __init pci_mmcfg_early_init(void); -- cgit v1.2.3 From e1a2a51e684bfe9d6165992d4a065439617a3107 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Thu, 15 May 2008 21:51:31 +0200 Subject: Suspend/Resume bug in PCI layer wrt quirks Some quirks should be called with interrupt disabled, we can't directly call them in .resume_early. Also the patch introduces pci_fixup_resume_early and pci_fixup_suspend, which matches current device core callbacks (.suspend/.resume_early). TBD: Somebody knows why we need quirk resume should double check if a quirk should be called in resume or resume_early. I changed some per my understanding, but can't make sure I fixed all. Signed-off-by: Shaohua Li Signed-off-by: Jesse Barnes --- include/linux/pci.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index aaa9f333fb44..700704ef70f3 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -1013,7 +1013,9 @@ enum pci_fixup_pass { pci_fixup_header, /* After reading configuration header */ pci_fixup_final, /* Final phase of device fixups */ pci_fixup_enable, /* pci_enable_device() time */ - pci_fixup_resume, /* pci_enable_device() time */ + pci_fixup_resume, /* pci_device_resume() */ + pci_fixup_suspend, /* pci_device_suspend */ + pci_fixup_resume_early, /* pci_device_resume_early() */ }; /* Anonymous variables would be nice... */ @@ -1035,6 +1037,12 @@ enum pci_fixup_pass { #define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \ resume##vendor##device##hook, vendor, device, hook) +#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \ + resume_early##vendor##device##hook, vendor, device, hook) +#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \ + DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \ + suspend##vendor##device##hook, vendor, device, hook) void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev); -- cgit v1.2.3 From 1eede070a59e1cc73da51e1aaa00d9ab86572cfc Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 20 May 2008 23:00:01 +0200 Subject: Introduce new top level suspend and hibernation callbacks Introduce 'struct pm_ops' and 'struct pm_ext_ops' ('ext' meaning 'extended') representing suspend and hibernation operations for bus types, device classes, device types and device drivers. Modify the PM core to use 'struct pm_ops' and 'struct pm_ext_ops' objects, if defined, instead of the ->suspend(), ->resume(), ->suspend_late(), and ->resume_early() callbacks (the old callbacks will be considered as legacy and gradually phased out). The main purpose of doing this is to separate suspend (aka S2RAM and standby) callbacks from hibernation callbacks in such a way that the new callbacks won't take arguments and the semantics of each of them will be clearly specified. This has been requested for multiple times by many people, including Linus himself, and the reason is that within the current scheme if ->resume() is called, for example, it's difficult to say why it's been called (ie. is it a resume from RAM or from hibernation or a suspend/hibernation failure etc.?). The second purpose is to make the suspend/hibernation callbacks more flexible so that device drivers can handle more than they can within the current scheme. For example, some drivers may need to prevent new children of the device from being registered before their ->suspend() callbacks are executed or they may want to carry out some operations requiring the availability of some other devices, not directly bound via the parent-child relationship, in order to prepare for the execution of ->suspend(), etc. Ultimately, we'd like to stop using the freezing of tasks for suspend and therefore the drivers' suspend/hibernation code will have to take care of the handling of the user space during suspend/hibernation. That, in turn, would be difficult within the current scheme, without the new ->prepare() and ->complete() callbacks. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Jesse Barnes --- include/linux/device.h | 9 ++ include/linux/pm.h | 314 ++++++++++++++++++++++++++++++++++++++++++++----- 2 files changed, 295 insertions(+), 28 deletions(-) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 6a2d04c011bc..f71a78d123ae 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -68,6 +68,8 @@ struct bus_type { int (*resume_early)(struct device *dev); int (*resume)(struct device *dev); + struct pm_ext_ops *pm; + struct bus_type_private *p; }; @@ -131,6 +133,8 @@ struct device_driver { int (*resume) (struct device *dev); struct attribute_group **groups; + struct pm_ops *pm; + struct driver_private *p; }; @@ -197,6 +201,8 @@ struct class { int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); + + struct pm_ops *pm; }; extern int __must_check class_register(struct class *class); @@ -248,8 +254,11 @@ struct device_type { struct attribute_group **groups; int (*uevent)(struct device *dev, struct kobj_uevent_env *env); void (*release)(struct device *dev); + int (*suspend)(struct device *dev, pm_message_t state); int (*resume)(struct device *dev); + + struct pm_ops *pm; }; /* interface for exporting device attributes */ diff --git a/include/linux/pm.h b/include/linux/pm.h index 39a7ee859b67..4ad9de94449a 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -112,7 +112,9 @@ typedef struct pm_message { int event; } pm_message_t; -/* +/** + * struct pm_ops - device PM callbacks + * * Several driver power state transitions are externally visible, affecting * the state of pending I/O queues and (for drivers that touch hardware) * interrupts, wakeups, DMA, and other hardware state. There may also be @@ -120,6 +122,284 @@ typedef struct pm_message { * to the rest of the driver stack (such as a driver that's ON gating off * clocks which are not in active use). * + * The externally visible transitions are handled with the help of the following + * callbacks included in this structure: + * + * @prepare: Prepare the device for the upcoming transition, but do NOT change + * its hardware state. Prevent new children of the device from being + * registered after @prepare() returns (the driver's subsystem and + * generally the rest of the kernel is supposed to prevent new calls to the + * probe method from being made too once @prepare() has succeeded). If + * @prepare() detects a situation it cannot handle (e.g. registration of a + * child already in progress), it may return -EAGAIN, so that the PM core + * can execute it once again (e.g. after the new child has been registered) + * to recover from the race condition. This method is executed for all + * kinds of suspend transitions and is followed by one of the suspend + * callbacks: @suspend(), @freeze(), or @poweroff(). + * The PM core executes @prepare() for all devices before starting to + * execute suspend callbacks for any of them, so drivers may assume all of + * the other devices to be present and functional while @prepare() is being + * executed. In particular, it is safe to make GFP_KERNEL memory + * allocations from within @prepare(). However, drivers may NOT assume + * anything about the availability of the user space at that time and it + * is not correct to request firmware from within @prepare() (it's too + * late to do that). [To work around this limitation, drivers may + * register suspend and hibernation notifiers that are executed before the + * freezing of tasks.] + * + * @complete: Undo the changes made by @prepare(). This method is executed for + * all kinds of resume transitions, following one of the resume callbacks: + * @resume(), @thaw(), @restore(). Also called if the state transition + * fails before the driver's suspend callback (@suspend(), @freeze(), + * @poweroff()) can be executed (e.g. if the suspend callback fails for one + * of the other devices that the PM core has unsuccessfully attempted to + * suspend earlier). + * The PM core executes @complete() after it has executed the appropriate + * resume callback for all devices. + * + * @suspend: Executed before putting the system into a sleep state in which the + * contents of main memory are preserved. Quiesce the device, put it into + * a low power state appropriate for the upcoming system state (such as + * PCI_D3hot), and enable wakeup events as appropriate. + * + * @resume: Executed after waking the system up from a sleep state in which the + * contents of main memory were preserved. Put the device into the + * appropriate state, according to the information saved in memory by the + * preceding @suspend(). The driver starts working again, responding to + * hardware events and software requests. The hardware may have gone + * through a power-off reset, or it may have maintained state from the + * previous suspend() which the driver may rely on while resuming. On most + * platforms, there are no restrictions on availability of resources like + * clocks during @resume(). + * + * @freeze: Hibernation-specific, executed before creating a hibernation image. + * Quiesce operations so that a consistent image can be created, but do NOT + * otherwise put the device into a low power device state and do NOT emit + * system wakeup events. Save in main memory the device settings to be + * used by @restore() during the subsequent resume from hibernation or by + * the subsequent @thaw(), if the creation of the image or the restoration + * of main memory contents from it fails. + * + * @thaw: Hibernation-specific, executed after creating a hibernation image OR + * if the creation of the image fails. Also executed after a failing + * attempt to restore the contents of main memory from such an image. + * Undo the changes made by the preceding @freeze(), so the device can be + * operated in the same way as immediately before the call to @freeze(). + * + * @poweroff: Hibernation-specific, executed after saving a hibernation image. + * Quiesce the device, put it into a low power state appropriate for the + * upcoming system state (such as PCI_D3hot), and enable wakeup events as + * appropriate. + * + * @restore: Hibernation-specific, executed after restoring the contents of main + * memory from a hibernation image. Driver starts working again, + * responding to hardware events and software requests. Drivers may NOT + * make ANY assumptions about the hardware state right prior to @restore(). + * On most platforms, there are no restrictions on availability of + * resources like clocks during @restore(). + * + * All of the above callbacks, except for @complete(), return error codes. + * However, the error codes returned by the resume operations, @resume(), + * @thaw(), and @restore(), do not cause the PM core to abort the resume + * transition during which they are returned. The error codes returned in + * that cases are only printed by the PM core to the system logs for debugging + * purposes. Still, it is recommended that drivers only return error codes + * from their resume methods in case of an unrecoverable failure (i.e. when the + * device being handled refuses to resume and becomes unusable) to allow us to + * modify the PM core in the future, so that it can avoid attempting to handle + * devices that failed to resume and their children. + * + * It is allowed to unregister devices while the above callbacks are being + * executed. However, it is not allowed to unregister a device from within any + * of its own callbacks. + */ + +struct pm_ops { + int (*prepare)(struct device *dev); + void (*complete)(struct device *dev); + int (*suspend)(struct device *dev); + int (*resume)(struct device *dev); + int (*freeze)(struct device *dev); + int (*thaw)(struct device *dev); + int (*poweroff)(struct device *dev); + int (*restore)(struct device *dev); +}; + +/** + * struct pm_ext_ops - extended device PM callbacks + * + * Some devices require certain operations related to suspend and hibernation + * to be carried out with interrupts disabled. Thus, 'struct pm_ext_ops' below + * is defined, adding callbacks to be executed with interrupts disabled to + * 'struct pm_ops'. + * + * The following callbacks included in 'struct pm_ext_ops' are executed with + * the nonboot CPUs switched off and with interrupts disabled on the only + * functional CPU. They also are executed with the PM core list of devices + * locked, so they must NOT unregister any devices. + * + * @suspend_noirq: Complete the operations of ->suspend() by carrying out any + * actions required for suspending the device that need interrupts to be + * disabled + * + * @resume_noirq: Prepare for the execution of ->resume() by carrying out any + * actions required for resuming the device that need interrupts to be + * disabled + * + * @freeze_noirq: Complete the operations of ->freeze() by carrying out any + * actions required for freezing the device that need interrupts to be + * disabled + * + * @thaw_noirq: Prepare for the execution of ->thaw() by carrying out any + * actions required for thawing the device that need interrupts to be + * disabled + * + * @poweroff_noirq: Complete the operations of ->poweroff() by carrying out any + * actions required for handling the device that need interrupts to be + * disabled + * + * @restore_noirq: Prepare for the execution of ->restore() by carrying out any + * actions required for restoring the operations of the device that need + * interrupts to be disabled + * + * All of the above callbacks return error codes, but the error codes returned + * by the resume operations, @resume_noirq(), @thaw_noirq(), and + * @restore_noirq(), do not cause the PM core to abort the resume transition + * during which they are returned. The error codes returned in that cases are + * only printed by the PM core to the system logs for debugging purposes. + * Still, as stated above, it is recommended that drivers only return error + * codes from their resume methods if the device being handled fails to resume + * and is not usable any more. + */ + +struct pm_ext_ops { + struct pm_ops base; + int (*suspend_noirq)(struct device *dev); + int (*resume_noirq)(struct device *dev); + int (*freeze_noirq)(struct device *dev); + int (*thaw_noirq)(struct device *dev); + int (*poweroff_noirq)(struct device *dev); + int (*restore_noirq)(struct device *dev); +}; + +/** + * PM_EVENT_ messages + * + * The following PM_EVENT_ messages are defined for the internal use of the PM + * core, in order to provide a mechanism allowing the high level suspend and + * hibernation code to convey the necessary information to the device PM core + * code: + * + * ON No transition. + * + * FREEZE System is going to hibernate, call ->prepare() and ->freeze() + * for all devices. + * + * SUSPEND System is going to suspend, call ->prepare() and ->suspend() + * for all devices. + * + * HIBERNATE Hibernation image has been saved, call ->prepare() and + * ->poweroff() for all devices. + * + * QUIESCE Contents of main memory are going to be restored from a (loaded) + * hibernation image, call ->prepare() and ->freeze() for all + * devices. + * + * RESUME System is resuming, call ->resume() and ->complete() for all + * devices. + * + * THAW Hibernation image has been created, call ->thaw() and + * ->complete() for all devices. + * + * RESTORE Contents of main memory have been restored from a hibernation + * image, call ->restore() and ->complete() for all devices. + * + * RECOVER Creation of a hibernation image or restoration of the main + * memory contents from a hibernation image has failed, call + * ->thaw() and ->complete() for all devices. + */ + +#define PM_EVENT_ON 0x0000 +#define PM_EVENT_FREEZE 0x0001 +#define PM_EVENT_SUSPEND 0x0002 +#define PM_EVENT_HIBERNATE 0x0004 +#define PM_EVENT_QUIESCE 0x0008 +#define PM_EVENT_RESUME 0x0010 +#define PM_EVENT_THAW 0x0020 +#define PM_EVENT_RESTORE 0x0040 +#define PM_EVENT_RECOVER 0x0080 + +#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE) + +#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, }) +#define PMSG_QUIESCE ((struct pm_message){ .event = PM_EVENT_QUIESCE, }) +#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, }) +#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, }) +#define PMSG_RESUME ((struct pm_message){ .event = PM_EVENT_RESUME, }) +#define PMSG_THAW ((struct pm_message){ .event = PM_EVENT_THAW, }) +#define PMSG_RESTORE ((struct pm_message){ .event = PM_EVENT_RESTORE, }) +#define PMSG_RECOVER ((struct pm_message){ .event = PM_EVENT_RECOVER, }) +#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, }) + +/** + * Device power management states + * + * These state labels are used internally by the PM core to indicate the current + * status of a device with respect to the PM core operations. + * + * DPM_ON Device is regarded as operational. Set this way + * initially and when ->complete() is about to be called. + * Also set when ->prepare() fails. + * + * DPM_PREPARING Device is going to be prepared for a PM transition. Set + * when ->prepare() is about to be called. + * + * DPM_RESUMING Device is going to be resumed. Set when ->resume(), + * ->thaw(), or ->restore() is about to be called. + * + * DPM_SUSPENDING Device has been prepared for a power transition. Set + * when ->prepare() has just succeeded. + * + * DPM_OFF Device is regarded as inactive. Set immediately after + * ->suspend(), ->freeze(), or ->poweroff() has succeeded. + * Also set when ->resume()_noirq, ->thaw_noirq(), or + * ->restore_noirq() is about to be called. + * + * DPM_OFF_IRQ Device is in a "deep sleep". Set immediately after + * ->suspend_noirq(), ->freeze_noirq(), or + * ->poweroff_noirq() has just succeeded. + */ + +enum dpm_state { + DPM_INVALID, + DPM_ON, + DPM_PREPARING, + DPM_RESUMING, + DPM_SUSPENDING, + DPM_OFF, + DPM_OFF_IRQ, +}; + +struct dev_pm_info { + pm_message_t power_state; + unsigned can_wakeup:1; + unsigned should_wakeup:1; + enum dpm_state status; /* Owned by the PM core */ +#ifdef CONFIG_PM_SLEEP + struct list_head entry; +#endif +}; + +/* + * The PM_EVENT_ messages are also used by drivers implementing the legacy + * suspend framework, based on the ->suspend() and ->resume() callbacks common + * for suspend and hibernation transitions, according to the rules below. + */ + +/* Necessary, because several drivers use PM_EVENT_PRETHAW */ +#define PM_EVENT_PRETHAW PM_EVENT_QUIESCE + +/* * One transition is triggered by resume(), after a suspend() call; the * message is implicit: * @@ -164,35 +444,13 @@ typedef struct pm_message { * or from system low-power states such as standby or suspend-to-RAM. */ -#define PM_EVENT_ON 0 -#define PM_EVENT_FREEZE 1 -#define PM_EVENT_SUSPEND 2 -#define PM_EVENT_HIBERNATE 4 -#define PM_EVENT_PRETHAW 8 - -#define PM_EVENT_SLEEP (PM_EVENT_SUSPEND | PM_EVENT_HIBERNATE) - -#define PMSG_FREEZE ((struct pm_message){ .event = PM_EVENT_FREEZE, }) -#define PMSG_PRETHAW ((struct pm_message){ .event = PM_EVENT_PRETHAW, }) -#define PMSG_SUSPEND ((struct pm_message){ .event = PM_EVENT_SUSPEND, }) -#define PMSG_HIBERNATE ((struct pm_message){ .event = PM_EVENT_HIBERNATE, }) -#define PMSG_ON ((struct pm_message){ .event = PM_EVENT_ON, }) - -struct dev_pm_info { - pm_message_t power_state; - unsigned can_wakeup:1; - unsigned should_wakeup:1; - bool sleeping:1; /* Owned by the PM core */ -#ifdef CONFIG_PM_SLEEP - struct list_head entry; -#endif -}; +#ifdef CONFIG_PM_SLEEP +extern void device_pm_lock(void); +extern void device_power_up(pm_message_t state); +extern void device_resume(pm_message_t state); +extern void device_pm_unlock(void); extern int device_power_down(pm_message_t state); -extern void device_power_up(void); -extern void device_resume(void); - -#ifdef CONFIG_PM_SLEEP extern int device_suspend(pm_message_t state); extern int device_prepare_suspend(pm_message_t state); -- cgit v1.2.3 From bbb44d9f23d868a2837c6b22b8dfb123d8e7800c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 20 May 2008 00:49:04 +0200 Subject: PCI: implement new suspend/resume callbacks Implement new suspend and hibernation callbacks for the PCI bus type. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Jesse Barnes --- include/linux/pci.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 700704ef70f3..507ee52323cd 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -389,7 +389,7 @@ struct pci_driver { int (*resume_early) (struct pci_dev *dev); int (*resume) (struct pci_dev *dev); /* Device woken up */ void (*shutdown) (struct pci_dev *dev); - + struct pm_ext_ops *pm; struct pci_error_handlers *err_handler; struct device_driver driver; struct pci_dynids dynids; -- cgit v1.2.3 From 25e18499e08cb097cbbfeab5de25d094d5312ee5 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Wed, 21 May 2008 01:40:43 +0200 Subject: Implement new suspend and hibernation callbacks for platform busses Implement new suspend and hibernation callbacks for the platform bus type. Signed-off-by: Rafael J. Wysocki Acked-by: Pavel Machek Signed-off-by: Greg KH Signed-off-by: Jesse Barnes --- include/linux/platform_device.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 3261681c82a4..95ac21ab3a09 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -53,6 +53,7 @@ struct platform_driver { int (*suspend_late)(struct platform_device *, pm_message_t state); int (*resume_early)(struct platform_device *); int (*resume)(struct platform_device *); + struct pm_ext_ops *pm; struct device_driver driver; }; -- cgit v1.2.3 From ac9c052d10d8d6f46a30cb46c0d6d753997c299f Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Wed, 28 May 2008 15:01:03 +0900 Subject: shpchp: check firmware before taking control Fix the following problems of shpchp driver about getting hotplug control from firmware. - The shpchp driver must not control the hotplug controller if it fails to get control from the firmware. But current shpchp controls the hotplug controller regardless the result, because it doesn't check the return value of get_hp_hw_control_from_firmware(). - Current shpchp driver doesn't support _OSC. The pciehp driver already have the code for evaluating _OSC and OSHP and shpchp and pciehp can share it. So this patch move that code from pciehp to acpi_pcihp.c. Signed-off-by: Kenji Kaneshige Signed-off-by: Jesse Barnes --- include/linux/pci_hotplug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index 8f67e8f2a3cc..dbdcd1ad3c6a 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -227,9 +227,9 @@ struct hotplug_params { #include #include #include -extern acpi_status acpi_run_oshp(acpi_handle handle); extern acpi_status acpi_get_hp_params_from_firmware(struct pci_bus *bus, struct hotplug_params *hpp); +int acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev, u32 flags); int acpi_root_bridge(acpi_handle handle); #endif #endif -- cgit v1.2.3 From f46753c5e354b857b20ab8e0fe7b2579831dc369 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 10 Jun 2008 15:28:50 -0600 Subject: PCI: introduce pci_slot Currently, /sys/bus/pci/slots/ only exposes hotplug attributes when a hotplug driver is loaded, but PCI slots have attributes such as address, speed, width, etc. that are not related to hotplug at all. Introduce pci_slot as the primary data structure and kobject model. Hotplug attributes described in hotplug_slot become a secondary structure associated with the pci_slot. This patch only creates the infrastructure that allows the separation of PCI slot attributes and hotplug attributes. In this patch, the PCI hotplug core remains the only user of this infrastructure, and thus, /sys/bus/pci/slots/ will still only become populated when a hotplug driver is loaded. A later patch in this series will add a second user of this new infrastructure and demonstrate splitting the task of exposing pci_slot attributes from hotplug_slot attributes. - Make pci_slot the primary sysfs entity. hotplug_slot becomes a subsidiary structure. o pci_create_slot() creates and registers a slot with the PCI core o pci_slot_add_hotplug() gives it hotplug capability - Change the prototype of pci_hp_register() to take the bus and slot number (on parent bus) as parameters. - Remove all the ->get_address methods since this functionality is now handled by pci_slot directly. [achiang@hp.com: rpaphp-correctly-pci_hp_register-for-empty-pci-slots] Tested-by: Badari Pulavarty Acked-by: Benjamin Herrenschmidt [akpm@linux-foundation.org: build fix] [akpm@linux-foundation.org: make headers_check happy] [akpm@linux-foundation.org: nuther build fix] [akpm@linux-foundation.org: fix typo in #include] Signed-off-by: Alex Chiang Signed-off-by: Matthew Wilcox Cc: Greg KH Cc: Kristen Carlson Accardi Cc: Len Brown Acked-by: Kenji Kaneshige Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes --- include/linux/pci.h | 19 +++++++++++++++++-- include/linux/pci_hotplug.h | 12 +++--------- 2 files changed, 20 insertions(+), 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/pci.h b/include/linux/pci.h index 507ee52323cd..f1f73f79a180 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -17,8 +17,7 @@ #ifndef LINUX_PCI_H #define LINUX_PCI_H -/* Include the pci register defines */ -#include +#include /* The pci register defines */ /* * The PCI interface treats multi-function devices as independent @@ -49,12 +48,22 @@ #include #include #include +#include #include #include /* Include the ID list */ #include +/* pci_slot represents a physical slot */ +struct pci_slot { + struct pci_bus *bus; /* The bus this slot is on */ + struct list_head list; /* node in list of slots on this bus */ + struct hotplug_slot *hotplug; /* Hotplug info (migrate over time) */ + unsigned char number; /* PCI_SLOT(pci_dev->devfn) */ + struct kobject kobj; +}; + /* File state for mmap()s on /proc/bus/pci/X/Y */ enum pci_mmap_state { pci_mmap_io, @@ -142,6 +151,7 @@ struct pci_dev { void *sysdata; /* hook for sys-specific extension */ struct proc_dir_entry *procent; /* device entry in /proc/bus/pci */ + struct pci_slot *slot; /* Physical slot this device is in */ unsigned int devfn; /* encoded device & function index */ unsigned short vendor; @@ -266,6 +276,7 @@ struct pci_bus { struct list_head children; /* list of child buses */ struct list_head devices; /* list of devices on this bus */ struct pci_dev *self; /* bridge device as seen by parent */ + struct list_head slots; /* list of slots on this bus */ struct resource *resource[PCI_BUS_NUM_RESOURCES]; /* address space routed to this bus */ @@ -488,6 +499,10 @@ struct pci_bus *pci_create_bus(struct device *parent, int bus, struct pci_ops *ops, void *sysdata); struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr); +struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr, + const char *name); +void pci_destroy_slot(struct pci_slot *slot); +void pci_update_slot_number(struct pci_slot *slot, int slot_nr); int pci_scan_slot(struct pci_bus *bus, int devfn); struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn); void pci_device_add(struct pci_dev *dev, struct pci_bus *bus); diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index dbdcd1ad3c6a..a08cd06b541a 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -95,9 +95,6 @@ struct hotplug_slot_attribute { * @get_adapter_status: Called to get see if an adapter is present in the slot or not. * If this field is NULL, the value passed in the struct hotplug_slot_info * will be used when this value is requested by a user. - * @get_address: Called to get pci address of a slot. - * If this field is NULL, the value pass