From d1fb57435c108b8dd66d7f47b4c60c1798dcae4c Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Tue, 16 Oct 2012 12:55:39 +0530 Subject: input: TSC: ti_tscadc: Add Step configuration as platform data There are 16 programmable Step Configuration registers which are used by the sequencer. Program the Steps in order to configure a channel input to be sampled. If the same step is applied several times, the coordinate values read are more accurate. Hence we provide the user an option of how many steps should be configured. For ex: If this value is assigned as 4, This means that 4 steps are applied to read x co-ordinate and 4 steps to read y co-ordinate. Furtheron the interrupt handler already holds code to use delta filter and report the best value out of these values to the input sub-system. Signed-off-by: Patil, Rachna Signed-off-by: Samuel Ortiz --- include/linux/input/ti_tscadc.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/input/ti_tscadc.h b/include/linux/input/ti_tscadc.h index b10a527a92a4..ad442a3eb68b 100644 --- a/include/linux/input/ti_tscadc.h +++ b/include/linux/input/ti_tscadc.h @@ -7,11 +7,17 @@ * i.e. 4/5/8 wire touchscreen support * on the platform. * @x_plate_resistance: X plate resistance. + * @steps_to_configure: The sequencer supports a total of + * 16 programmable steps. + * A step configured to read a single + * co-ordinate value, can be applied + * more number of times for better results. */ struct tsc_data { int wires; int x_plate_resistance; + int steps_to_configure; }; #endif -- cgit v1.2.3 From 55c04de5176ea3eac6fdc469a6a063c5cb91ed7c Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Tue, 16 Oct 2012 12:55:42 +0530 Subject: input: TSC: ti_tscadc: Rename the existing touchscreen driver Make way for addition of MFD driver. The existing touchsreen driver is a MFD client. For better readability we rename the file to indicate its functionality as only touchscreen. Signed-off-by: Patil, Rachna Signed-off-by: Samuel Ortiz --- include/linux/input/ti_am335x_tsc.h | 23 +++++++++++++++++++++++ include/linux/input/ti_tscadc.h | 23 ----------------------- 2 files changed, 23 insertions(+), 23 deletions(-) create mode 100644 include/linux/input/ti_am335x_tsc.h delete mode 100644 include/linux/input/ti_tscadc.h (limited to 'include/linux') diff --git a/include/linux/input/ti_am335x_tsc.h b/include/linux/input/ti_am335x_tsc.h new file mode 100644 index 000000000000..49269a2aa329 --- /dev/null +++ b/include/linux/input/ti_am335x_tsc.h @@ -0,0 +1,23 @@ +#ifndef __LINUX_TI_AM335X_TSC_H +#define __LINUX_TI_AM335X_TSC_H + +/** + * struct tsc_data Touchscreen wire configuration + * @wires: Wires refer to application modes + * i.e. 4/5/8 wire touchscreen support + * on the platform. + * @x_plate_resistance: X plate resistance. + * @steps_to_configure: The sequencer supports a total of + * 16 programmable steps. + * A step configured to read a single + * co-ordinate value, can be applied + * more number of times for better results. + */ + +struct tsc_data { + int wires; + int x_plate_resistance; + int steps_to_configure; +}; + +#endif diff --git a/include/linux/input/ti_tscadc.h b/include/linux/input/ti_tscadc.h deleted file mode 100644 index ad442a3eb68b..000000000000 --- a/include/linux/input/ti_tscadc.h +++ /dev/null @@ -1,23 +0,0 @@ -#ifndef __LINUX_TI_TSCADC_H -#define __LINUX_TI_TSCADC_H - -/** - * struct tsc_data Touchscreen wire configuration - * @wires: Wires refer to application modes - * i.e. 4/5/8 wire touchscreen support - * on the platform. - * @x_plate_resistance: X plate resistance. - * @steps_to_configure: The sequencer supports a total of - * 16 programmable steps. - * A step configured to read a single - * co-ordinate value, can be applied - * more number of times for better results. - */ - -struct tsc_data { - int wires; - int x_plate_resistance; - int steps_to_configure; -}; - -#endif -- cgit v1.2.3 From 01636eb970a029897b06fb96026941429212ddd9 Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Tue, 16 Oct 2012 12:55:43 +0530 Subject: mfd: ti_tscadc: Add support for TI's TSC/ADC MFDevice Add the mfd core driver which supports touchscreen and ADC. With this patch we are only adding infrastructure to support the MFD clients. Signed-off-by: Patil, Rachna Signed-off-by: Samuel Ortiz --- include/linux/mfd/ti_am335x_tscadc.h | 137 +++++++++++++++++++++++++++++++++++ 1 file changed, 137 insertions(+) create mode 100644 include/linux/mfd/ti_am335x_tscadc.h (limited to 'include/linux') diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h new file mode 100644 index 000000000000..b7232b157061 --- /dev/null +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -0,0 +1,137 @@ +#ifndef __LINUX_TI_AM335X_TSCADC_MFD_H +#define __LINUX_TI_AM335X_TSCADC_MFD_H + +/* + * TI Touch Screen / ADC MFD driver + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +#define REG_RAWIRQSTATUS 0x024 +#define REG_IRQSTATUS 0x028 +#define REG_IRQENABLE 0x02C +#define REG_IRQCLR 0x030 +#define REG_IRQWAKEUP 0x034 +#define REG_CTRL 0x040 +#define REG_ADCFSM 0x044 +#define REG_CLKDIV 0x04C +#define REG_SE 0x054 +#define REG_IDLECONFIG 0x058 +#define REG_CHARGECONFIG 0x05C +#define REG_CHARGEDELAY 0x060 +#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) +#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) +#define REG_FIFO0CNT 0xE4 +#define REG_FIFO0THR 0xE8 +#define REG_FIFO1CNT 0xF0 +#define REG_FIFO1THR 0xF4 +#define REG_FIFO0 0x100 +#define REG_FIFO1 0x200 + +/* Register Bitfields */ +/* IRQ wakeup enable */ +#define IRQWKUP_ENB BIT(0) + +/* Step Enable */ +#define STEPENB_MASK (0x1FFFF << 0) +#define STEPENB(val) ((val) << 0) +#define STPENB_STEPENB STEPENB(0x1FFFF) + +/* IRQ enable */ +#define IRQENB_HW_PEN BIT(0) +#define IRQENB_FIFO0THRES BIT(2) +#define IRQENB_FIFO1THRES BIT(5) +#define IRQENB_PENUP BIT(9) + +/* Step Configuration */ +#define STEPCONFIG_MODE_MASK (3 << 0) +#define STEPCONFIG_MODE(val) ((val) << 0) +#define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2) +#define STEPCONFIG_AVG_MASK (7 << 2) +#define STEPCONFIG_AVG(val) ((val) << 2) +#define STEPCONFIG_AVG_16 STEPCONFIG_AVG(4) +#define STEPCONFIG_XPP BIT(5) +#define STEPCONFIG_XNN BIT(6) +#define STEPCONFIG_YPP BIT(7) +#define STEPCONFIG_YNN BIT(8) +#define STEPCONFIG_XNP BIT(9) +#define STEPCONFIG_YPN BIT(10) +#define STEPCONFIG_INM_MASK (0xF << 15) +#define STEPCONFIG_INM(val) ((val) << 15) +#define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8) +#define STEPCONFIG_INP_MASK (0xF << 19) +#define STEPCONFIG_INP(val) ((val) << 19) +#define STEPCONFIG_INP_AN2 STEPCONFIG_INP(2) +#define STEPCONFIG_INP_AN3 STEPCONFIG_INP(3) +#define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4) +#define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8) +#define STEPCONFIG_FIFO1 BIT(26) + +/* Delay register */ +#define STEPDELAY_OPEN_MASK (0x3FFFF << 0) +#define STEPDELAY_OPEN(val) ((val) << 0) +#define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098) +#define STEPDELAY_SAMPLE_MASK (0xFF << 24) +#define STEPDELAY_SAMPLE(val) ((val) << 24) +#define STEPCONFIG_SAMPLEDLY STEPDELAY_SAMPLE(0) + +/* Charge Config */ +#define STEPCHARGE_RFP_MASK (7 << 12) +#define STEPCHARGE_RFP(val) ((val) << 12) +#define STEPCHARGE_RFP_XPUL STEPCHARGE_RFP(1) +#define STEPCHARGE_INM_MASK (0xF << 15) +#define STEPCHARGE_INM(val) ((val) << 15) +#define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1) +#define STEPCHARGE_INP_MASK (0xF << 19) +#define STEPCHARGE_INP(val) ((val) << 19) +#define STEPCHARGE_INP_AN1 STEPCHARGE_INP(1) +#define STEPCHARGE_RFM_MASK (3 << 23) +#define STEPCHARGE_RFM(val) ((val) << 23) +#define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1) + +/* Charge delay */ +#define CHARGEDLY_OPEN_MASK (0x3FFFF << 0) +#define CHARGEDLY_OPEN(val) ((val) << 0) +#define CHARGEDLY_OPENDLY CHARGEDLY_OPEN(1) + +/* Control register */ +#define CNTRLREG_TSCSSENB BIT(0) +#define CNTRLREG_STEPID BIT(1) +#define CNTRLREG_STEPCONFIGWRT BIT(2) +#define CNTRLREG_POWERDOWN BIT(4) +#define CNTRLREG_AFE_CTRL_MASK (3 << 5) +#define CNTRLREG_AFE_CTRL(val) ((val) << 5) +#define CNTRLREG_4WIRE CNTRLREG_AFE_CTRL(1) +#define CNTRLREG_5WIRE CNTRLREG_AFE_CTRL(2) +#define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3) +#define CNTRLREG_TSCENB BIT(7) + +#define ADC_CLK 3000000 +#define MAX_CLK_DIV 7 + +#define TSCADC_CELLS 0 + +struct mfd_tscadc_board { + struct tsc_data *tsc_init; +}; + +struct ti_tscadc_dev { + struct device *dev; + struct regmap *regmap_tscadc; + void __iomem *tscadc_base; + int irq; + struct mfd_cell cells[TSCADC_CELLS]; +}; + +#endif -- cgit v1.2.3 From 2b99bafab19145a72e2c557326fc4662a864a162 Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Tue, 16 Oct 2012 12:55:44 +0530 Subject: input: TSC: ti_tsc: Convert TSC into a MFDevice This patch converts touchscreen into a MFD client. All the register definitions, clock initialization, etc has been moved to MFD core driver. Signed-off-by: Patil, Rachna Signed-off-by: Samuel Ortiz --- include/linux/mfd/ti_am335x_tscadc.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index b7232b157061..fc18b2ef753f 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -47,6 +47,7 @@ #define STEPENB_MASK (0x1FFFF << 0) #define STEPENB(val) ((val) << 0) #define STPENB_STEPENB STEPENB(0x1FFFF) +#define STPENB_STEPENB_TC STEPENB(0x1FFF) /* IRQ enable */ #define IRQENB_HW_PEN BIT(0) @@ -120,7 +121,11 @@ #define ADC_CLK 3000000 #define MAX_CLK_DIV 7 -#define TSCADC_CELLS 0 +#define TSCADC_CELLS 1 + +enum tscadc_cells { + TSC_CELL, +}; struct mfd_tscadc_board { struct tsc_data *tsc_init; @@ -132,6 +137,9 @@ struct ti_tscadc_dev { void __iomem *tscadc_base; int irq; struct mfd_cell cells[TSCADC_CELLS]; + + /* tsc device */ + struct titsc *tsc; }; #endif -- cgit v1.2.3 From 5e53a69b44e893227b046a7bc74db3cb40d7f39b Mon Sep 17 00:00:00 2001 From: "Patil, Rachna" Date: Tue, 16 Oct 2012 12:55:45 +0530 Subject: IIO : ADC: tiadc: Add support of TI's ADC driver This patch adds support for TI's ADC driver. This is a multifunctional device. Analog input lines are provided on which voltage measurements can be carried out. You can have upto 8 input lines. Signed-off-by: Patil, Rachna Acked-by: Jonathan Cameron Signed-off-by: Samuel Ortiz --- include/linux/mfd/ti_am335x_tscadc.h | 9 ++++++++- include/linux/platform_data/ti_am335x_adc.h | 14 ++++++++++++++ 2 files changed, 22 insertions(+), 1 deletion(-) create mode 100644 include/linux/platform_data/ti_am335x_adc.h (limited to 'include/linux') diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index fc18b2ef753f..c79ad5d2f271 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -120,15 +120,19 @@ #define ADC_CLK 3000000 #define MAX_CLK_DIV 7 +#define TOTAL_STEPS 16 +#define TOTAL_CHANNELS 8 -#define TSCADC_CELLS 1 +#define TSCADC_CELLS 2 enum tscadc_cells { TSC_CELL, + ADC_CELL, }; struct mfd_tscadc_board { struct tsc_data *tsc_init; + struct adc_data *adc_init; }; struct ti_tscadc_dev { @@ -140,6 +144,9 @@ struct ti_tscadc_dev { /* tsc device */ struct titsc *tsc; + + /* adc device */ + struct adc_device *adc; }; #endif diff --git a/include/linux/platform_data/ti_am335x_adc.h b/include/linux/platform_data/ti_am335x_adc.h new file mode 100644 index 000000000000..e41d5834cb84 --- /dev/null +++ b/include/linux/platform_data/ti_am335x_adc.h @@ -0,0 +1,14 @@ +#ifndef __LINUX_TI_AM335X_ADC_H +#define __LINUX_TI_AM335X_ADC_H + +/** + * struct adc_data ADC Input information + * @adc_channels: Number of analog inputs + * available for ADC. + */ + +struct adc_data { + unsigned int adc_channels; +}; + +#endif -- cgit v1.2.3 From ada8a8a13b13a2749818524a7949935f68d2b3eb Mon Sep 17 00:00:00 2001 From: Wei WANG Date: Mon, 29 Oct 2012 13:49:33 +0800 Subject: mfd: Add realtek pcie card reader driver Realtek PCI-E card reader driver adapts requests from upper-level sdmmc/memstick layer to the real physical card reader. Signed-off-by: Wei WANG Reviewed-by: Arnd Bergmann Tested-by: Borislav Petkov Signed-off-by: Samuel Ortiz --- include/linux/mfd/rtsx_common.h | 48 +++ include/linux/mfd/rtsx_pci.h | 794 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 842 insertions(+) create mode 100644 include/linux/mfd/rtsx_common.h create mode 100644 include/linux/mfd/rtsx_pci.h (limited to 'include/linux') diff --git a/include/linux/mfd/rtsx_common.h b/include/linux/mfd/rtsx_common.h new file mode 100644 index 000000000000..a8d393e3066b --- /dev/null +++ b/include/linux/mfd/rtsx_common.h @@ -0,0 +1,48 @@ +/* Driver for Realtek driver-based card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see . + * + * Author: + * Wei WANG + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#ifndef __RTSX_COMMON_H +#define __RTSX_COMMON_H + +#define DRV_NAME_RTSX_PCI "rtsx_pci" +#define DRV_NAME_RTSX_PCI_SDMMC "rtsx_pci_sdmmc" +#define DRV_NAME_RTSX_PCI_MS "rtsx_pci_ms" + +#define RTSX_REG_PAIR(addr, val) (((u32)(addr) << 16) | (u8)(val)) + +#define RTSX_SSC_DEPTH_4M 0x01 +#define RTSX_SSC_DEPTH_2M 0x02 +#define RTSX_SSC_DEPTH_1M 0x03 +#define RTSX_SSC_DEPTH_500K 0x04 +#define RTSX_SSC_DEPTH_250K 0x05 + +#define RTSX_SD_CARD 0 +#define RTSX_MS_CARD 1 + +struct platform_device; + +struct rtsx_slot { + struct platform_device *p_dev; + void (*card_event)(struct platform_device *p_dev); +}; + +#endif diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h new file mode 100644 index 000000000000..060b721fcbfb --- /dev/null +++ b/include/linux/mfd/rtsx_pci.h @@ -0,0 +1,794 @@ +/* Driver for Realtek PCI-Express card reader + * + * Copyright(c) 2009 Realtek Semiconductor Corp. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see . + * + * Author: + * Wei WANG + * No. 450, Shenhu Road, Suzhou Industry Park, Suzhou, China + */ + +#ifndef __RTSX_PCI_H +#define __RTSX_PCI_H + +#include +#include + +#include "rtsx_common.h" + +#define MAX_RW_REG_CNT 1024 + +/* PCI Operation Register Address */ +#define RTSX_HCBAR 0x00 +#define RTSX_HCBCTLR 0x04 +#define RTSX_HDBAR 0x08 +#define RTSX_HDBCTLR 0x0C +#define RTSX_HAIMR 0x10 +#define RTSX_BIPR 0x14 +#define RTSX_BIER 0x18 + +/* Host command buffer control register */ +#define STOP_CMD (0x01 << 28) + +/* Host data buffer control register */ +#define SDMA_MODE 0x00 +#define ADMA_MODE (0x02 << 26) +#define STOP_DMA (0x01 << 28) +#define TRIG_DMA (0x01 << 31) + +/* Host access internal memory register */ +#define HAIMR_TRANS_START (0x01 << 31) +#define HAIMR_READ 0x00 +#define HAIMR_WRITE (0x01 << 30) +#define HAIMR_READ_START (HAIMR_TRANS_START | HAIMR_READ) +#define HAIMR_WRITE_START (HAIMR_TRANS_START | HAIMR_WRITE) +#define HAIMR_TRANS_END (HAIMR_TRANS_START) + +/* Bus interrupt pending register */ +#define CMD_DONE_INT (1 << 31) +#define DATA_DONE_INT (1 << 30) +#define TRANS_OK_INT (1 << 29) +#define TRANS_FAIL_INT (1 << 28) +#define XD_INT (1 << 27) +#define MS_INT (1 << 26) +#define SD_INT (1 << 25) +#define GPIO0_INT (1 << 24) +#define OC_INT (1 << 23) +#define SD_WRITE_PROTECT (1 << 19) +#define XD_EXIST (1 << 18) +#define MS_EXIST (1 << 17) +#define SD_EXIST (1 << 16) +#define DELINK_INT GPIO0_INT +#define MS_OC_INT (1 << 23) +#define SD_OC_INT (1 << 22) + +#define CARD_INT (XD_INT | MS_INT | SD_INT) +#define NEED_COMPLETE_INT (DATA_DONE_INT | TRANS_OK_INT | TRANS_FAIL_INT) +#define RTSX_INT (CMD_DONE_INT | NEED_COMPLETE_INT | \ + CARD_INT | GPIO0_INT | OC_INT) + +#define CARD_EXIST (XD_EXIST | MS_EXIST | SD_EXIST) + +/* Bus interrupt enable register */ +#define CMD_DONE_INT_EN (1 << 31) +#define DATA_DONE_INT_EN (1 << 30) +#define TRANS_OK_INT_EN (1 << 29) +#define TRANS_FAIL_INT_EN (1 << 28) +#define XD_INT_EN (1 << 27) +#define MS_INT_EN (1 << 26) +#define SD_INT_EN (1 << 25) +#define GPIO0_INT_EN (1 << 24) +#define OC_INT_EN (1 << 23) +#define DELINK_INT_EN GPIO0_INT_EN +#define MS_OC_INT_EN (1 << 23) +#define SD_OC_INT_EN (1 << 22) + +#define READ_REG_CMD 0 +#define WRITE_REG_CMD 1 +#define CHECK_REG_CMD 2 + +/* + * macros for easy use + */ +#define rtsx_pci_writel(pcr, reg, value) \ + iowrite32(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readl(pcr, reg) \ + ioread32((pcr)->remap_addr + reg) +#define rtsx_pci_writew(pcr, reg, value) \ + iowrite16(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readw(pcr, reg) \ + ioread16((pcr)->remap_addr + reg) +#define rtsx_pci_writeb(pcr, reg, value) \ + iowrite8(value, (pcr)->remap_addr + reg) +#define rtsx_pci_readb(pcr, reg) \ + ioread8((pcr)->remap_addr + reg) + +#define rtsx_pci_read_config_byte(pcr, where, val) \ + pci_read_config_byte((pcr)->pci, where, val) + +#define rtsx_pci_write_config_byte(pcr, where, val) \ + pci_write_config_byte((pcr)->pci, where, val) + +#define rtsx_pci_read_config_dword(pcr, where, val) \ + pci_read_config_dword((pcr)->pci, where, val) + +#define rtsx_pci_write_config_dword(pcr, where, val) \ + pci_write_config_dword((pcr)->pci, where, val) + +#define STATE_TRANS_NONE 0 +#define STATE_TRANS_CMD 1 +#define STATE_TRANS_BUF 2 +#define STATE_TRANS_SG 3 + +#define TRANS_NOT_READY 0 +#define TRANS_RESULT_OK 1 +#define TRANS_RESULT_FAIL 2 +#define TRANS_NO_DEVICE 3 + +#define RTSX_RESV_BUF_LEN 4096 +#define HOST_CMDS_BUF_LEN 1024 +#define HOST_SG_TBL_BUF_LEN (RTSX_RESV_BUF_LEN - HOST_CMDS_BUF_LEN) +#define HOST_SG_TBL_ITEMS (HOST_SG_TBL_BUF_LEN / 8) +#define MAX_SG_ITEM_LEN 0x80000 + +#define HOST_TO_DEVICE 0 +#define DEVICE_TO_HOST 1 + +#define MAX_PHASE 31 +#define RX_TUNING_CNT 3 + +/* SG descriptor */ +#define SG_INT 0x04 +#define SG_END 0x02 +#define SG_VALID 0x01 + +#define SG_NO_OP 0x00 +#define SG_TRANS_DATA (0x02 << 4) +#define SG_LINK_DESC (0x03 << 4) + +/* SD bank voltage */ +#define SD_IO_3V3 0 +#define SD_IO_1V8 1 + + +/* Card Clock Enable Register */ +#define SD_CLK_EN 0x04 +#define MS_CLK_EN 0x08 + +/* Card Select Register */ +#define SD_MOD_SEL 2 +#define MS_MOD_SEL 3 + +/* Card Output Enable Register */ +#define SD_OUTPUT_EN 0x04 +#define MS_OUTPUT_EN 0x08 + +/* CARD_SHARE_MODE */ +#define CARD_SHARE_MASK 0x0F +#define CARD_SHARE_MULTI_LUN 0x00 +#define CARD_SHARE_NORMAL 0x00 +#define CARD_SHARE_48_SD 0x04 +#define CARD_SHARE_48_MS 0x08 +/* CARD_SHARE_MODE for barossa */ +#define CARD_SHARE_BAROSSA_SD 0x01 +#define CARD_SHARE_BAROSSA_MS 0x02 + +/* SD30_DRIVE_SEL */ +#define DRIVER_TYPE_A 0x05 +#define DRIVER_TYPE_B 0x03 +#define DRIVER_TYPE_C 0x02 +#define DRIVER_TYPE_D 0x01 + +/* FPDCTL */ +#define SSC_POWER_DOWN 0x01 +#define SD_OC_POWER_DOWN 0x02 +#define ALL_POWER_DOWN 0x07 +#define OC_POWER_DOWN 0x06 + +/* CLK_CTL */ +#define CHANGE_CLK 0x01 + +/* LDO_CTL */ +#define BPP_LDO_POWB 0x03 +#define BPP_LDO_ON 0x00 +#define BPP_LDO_SUSPEND 0x02 +#define BPP_LDO_OFF 0x03 + +/* CD_PAD_CTL */ +#define CD_DISABLE_MASK 0x07 +#define MS_CD_DISABLE 0x04 +#define SD_CD_DISABLE 0x02 +#define XD_CD_DISABLE 0x01 +#define CD_DISABLE 0x07 +#define CD_ENABLE 0x00 +#define MS_CD_EN_ONLY 0x03 +#define SD_CD_EN_ONLY 0x05 +#define XD_CD_EN_ONLY 0x06 +#define FORCE_CD_LOW_MASK 0x38 +#define FORCE_CD_XD_LOW 0x08 +#define FORCE_CD_SD_LOW 0x10 +#define FORCE_CD_MS_LOW 0x20 +#define CD_AUTO_DISABLE 0x40 + +/* SD_STAT1 */ +#define SD_CRC7_ERR 0x80 +#define SD_CRC16_ERR 0x40 +#define SD_CRC_WRITE_ERR 0x20 +#define SD_CRC_WRITE_ERR_MASK 0x1C +#define GET_CRC_TIME_OUT 0x02 +#define SD_TUNING_COMPARE_ERR 0x01 + +/* SD_STAT2 */ +#define SD_RSP_80CLK_TIMEOUT 0x01 + +/* SD_BUS_STAT */ +#define SD_CLK_TOGGLE_EN 0x80 +#define SD_CLK_FORCE_STOP 0x40 +#define SD_DAT3_STATUS 0x10 +#define SD_DAT2_STATUS 0x08 +#define SD_DAT1_STATUS 0x04 +#define SD_DAT0_STATUS 0x02 +#define SD_CMD_STATUS 0x01 + +/* SD_PAD_CTL */ +#define SD_IO_USING_1V8 0x80 +#define SD_IO_USING_3V3 0x7F +#define TYPE_A_DRIVING 0x00 +#define TYPE_B_DRIVING 0x01 +#define TYPE_C_DRIVING 0x02 +#define TYPE_D_DRIVING 0x03 + +/* SD_SAMPLE_POINT_CTL */ +#define DDR_FIX_RX_DAT 0x00 +#define DDR_VAR_RX_DAT 0x80 +#define DDR_FIX_RX_DAT_EDGE 0x00 +#define DDR_FIX_RX_DAT_14_DELAY 0x40 +#define DDR_FIX_RX_CMD 0x00 +#define DDR_VAR_RX_CMD 0x20 +#define DDR_FIX_RX_CMD_POS_EDGE 0x00 +#define DDR_FIX_RX_CMD_14_DELAY 0x10 +#define SD20_RX_POS_EDGE 0x00 +#define SD20_RX_14_DELAY 0x08 +#define SD20_RX_SEL_MASK 0x08 + +/* SD_PUSH_POINT_CTL */ +#define DDR_FIX_TX_CMD_DAT 0x00 +#define DDR_VAR_TX_CMD_DAT 0x80 +#define DDR_FIX_TX_DAT_14_TSU 0x00 +#define DDR_FIX_TX_DAT_12_TSU 0x40 +#define DDR_FIX_TX_CMD_NEG_EDGE 0x00 +#define DDR_FIX_TX_CMD_14_AHEAD 0x20 +#define SD20_TX_NEG_EDGE 0x00 +#define SD20_TX_14_AHEAD 0x10 +#define SD20_TX_SEL_MASK 0x10 +#define DDR_VAR_SDCLK_POL_SWAP 0x01 + +/* SD_TRANSFER */ +#define SD_TRANSFER_START 0x80 +#define SD_TRANSFER_END 0x40 +#define SD_STAT_IDLE 0x20 +#define SD_TRANSFER_ERR 0x10 +/* SD Transfer Mode definition */ +#define SD_TM_NORMAL_WRITE 0x00 +#define SD_TM_AUTO_WRITE_3 0x01 +#define SD_TM_AUTO_WRITE_4 0x02 +#define SD_TM_AUTO_READ_3 0x05 +#define SD_TM_AUTO_READ_4 0x06 +#define SD_TM_CMD_RSP 0x08 +#define SD_TM_AUTO_WRITE_1 0x09 +#define SD_TM_AUTO_WRITE_2 0x0A +#define SD_TM_NORMAL_READ 0x0C +#define SD_TM_AUTO_READ_1 0x0D +#define SD_TM_AUTO_READ_2 0x0E +#define SD_TM_AUTO_TUNING 0x0F + +/* SD_VPTX_CTL / SD_VPRX_CTL */ +#define PHASE_CHANGE 0x80 +#define PHASE_NOT_RESET 0x40 + +/* SD_DCMPS_TX_CTL / SD_DCMPS_RX_CTL */ +#define DCMPS_CHANGE 0x80 +#define DCMPS_CHANGE_DONE 0x40 +#define DCMPS_ERROR 0x20 +#define DCMPS_CURRENT_PHASE 0x1F + +/* SD Configure 1 Register */ +#define SD_CLK_DIVIDE_0 0x00 +#define SD_CLK_DIVIDE_256 0xC0 +#define SD_CLK_DIVIDE_128 0x80 +#define SD_BUS_WIDTH_1BIT 0x00 +#define SD_BUS_WIDTH_4BIT 0x01 +#define SD_BUS_WIDTH_8BIT 0x02 +#define SD_ASYNC_FIFO_NOT_RST 0x10 +#define SD_20_MODE 0x00 +#define SD_DDR_MODE 0x04 +#define SD_30_MODE 0x08 + +#define SD_CLK_DIVIDE_MASK 0xC0 + +/* SD_CMD_STATE */ +#define SD_CMD_IDLE 0x80 + +/* SD_DATA_STATE */ +#define SD_DATA_IDLE 0x80 + +/* DCM_DRP_CTL */ +#define DCM_RESET 0x08 +#define DCM_LOCKED 0x04 +#define DCM_208M 0x00 +#define DCM_TX 0x01 +#define DCM_RX 0x02 + +/* DCM_DRP_TRIG */ +#define DRP_START 0x80 +#define DRP_DONE 0x40 + +/* DCM_DRP_CFG */ +#define DRP_WRITE 0x80 +#define DRP_READ 0x00 +#define DCM_WRITE_ADDRESS_50 0x50 +#define DCM_WRITE_ADDRESS_51 0x51 +#define DCM_READ_ADDRESS_00 0x00 +#define DCM_READ_ADDRESS_51 0x51 + +/* IRQSTAT0 */ +#define DMA_DONE_INT 0x80 +#define SUSPEND_INT 0x40 +#define LINK_RDY_INT 0x20 +#define LINK_DOWN_INT 0x10 + +/* DMACTL */ +#define DMA_RST 0x80 +#define DMA_BUSY 0x04 +#define DMA_DIR_TO_CARD 0x00 +#define DMA_DIR_FROM_CARD 0x02 +#define DMA_EN 0x01 +#define DMA_128 (0 << 4) +#define DMA_256 (1 << 4) +#define DMA_512 (2 << 4) +#define DMA_1024 (3 << 4) +#define DMA_PACK_SIZE_MASK 0x30 + +/* SSC_CTL1 */ +#define SSC_RSTB 0x80 +#define SSC_8X_EN 0x40 +#define SSC_FIX_FRAC 0x20 +#define SSC_SEL_1M 0x00 +#define SSC_SEL_2M 0x08 +#define SSC_SEL_4M 0x10 +#define SSC_SEL_8M 0x18 + +/* SSC_CTL2 */ +#define SSC_DEPTH_MASK 0x07 +#define SSC_DEPTH_DISALBE 0x00 +#define SSC_DEPTH_4M 0x01 +#define SSC_DEPTH_2M 0x02 +#define SSC_DEPTH_1M 0x03 +#define SSC_DEPTH_500K 0x04 +#define SSC_DEPTH_250K 0x05 + +/* System Clock Control Register */ +#define CLK_LOW_FREQ 0x01 + +/* System Clock Divider Register */ +#define CLK_DIV_1 0x01 +#define CLK_DIV_2 0x02 +#define CLK_DIV_4 0x03 +#define CLK_DIV_8 0x04 + +/* MS_CFG */ +#define SAMPLE_TIME_RISING 0x00 +#define SAMPLE_TIME_FALLING 0x80 +#define PUSH_TIME_DEFAULT 0x00 +#define PUSH_TIME_ODD 0x40 +#define NO_EXTEND_TOGGLE 0x00 +#define EXTEND_TOGGLE_CHK 0x20 +#define MS_BUS_WIDTH_1 0x00 +#define MS_BUS_WIDTH_4 0x10 +#define MS_BUS_WIDTH_8 0x18 +#define MS_2K_SECTOR_MODE 0x04 +#define MS_512_SECTOR_MODE 0x00 +#define MS_TOGGLE_TIMEOUT_EN 0x00 +#define MS_TOGGLE_TIMEOUT_DISEN 0x01 +#define MS_NO_CHECK_INT 0x02 + +/* MS_TRANS_CFG */ +#define WAIT_INT 0x80 +#define NO_WAIT_INT 0x00 +#define NO_AUTO_READ_INT_REG 0x00 +#define AUTO_READ_INT_REG 0x40 +#define MS_CRC16_ERR 0x20 +#define MS_RDY_TIMEOUT 0x10 +#define MS_INT_CMDNK 0x08 +#define MS_INT_BREQ 0x04 +#define MS_INT_ERR 0x02 +#define MS_INT_CED 0x01 + +/* MS_TRANSFER */ +#define MS_TRANSFER_START 0x80 +#define MS_TRANSFER_END 0x40 +#define MS_TRANSFER_ERR 0x20 +#define MS_BS_STATE 0x10 +#define MS_TM_READ_BYTES 0x00 +#define MS_TM_NORMAL_READ 0x01 +#define MS_TM_WRITE_BYTES 0x04 +#define MS_TM_NORMAL_WRITE 0x05 +#define MS_TM_AUTO_READ 0x08 +#define MS_TM_AUTO_WRITE 0x0C + +/* SD Configure 2 Register */ +#define SD_CALCULATE_CRC7 0x00 +#define SD_NO_CALCULATE_CRC7 0x80 +#define SD_CHECK_CRC16 0x00 +#define SD_NO_CHECK_CRC16 0x40 +#define SD_NO_CHECK_WAIT_CRC_TO 0x20 +#define SD_WAIT_BUSY_END 0x08 +#define SD_NO_WAIT_BUSY_END 0x00 +#define SD_CHECK_CRC7 0x00 +#define SD_NO_CHECK_CRC7 0x04 +#define SD_RSP_LEN_0 0x00 +#define SD_RSP_LEN_6 0x01 +#define SD_RSP_LEN_17 0x02 +/* SD/MMC Response Type Definition */ +#define SD_RSP_TYPE_R0 0x04 +#define SD_RSP_TYPE_R1 0x01 +#define SD_RSP_TYPE_R1b 0x09 +#define SD_RSP_TYPE_R2 0x02 +#define SD_RSP_TYPE_R3 0x05 +#define SD_RSP_TYPE_R4 0x05 +#define SD_RSP_TYPE_R5 0x01 +#define SD_RSP_TYPE_R6 0x01 +#define SD_RSP_TYPE_R7 0x01 + +/* SD_CONFIURE3 */ +#define SD_RSP_80CLK_TIMEOUT_EN 0x01 + +/* Card Transfer Reset Register */ +#define SPI_STOP 0x01 +#define XD_STOP 0x02 +#define SD_STOP 0x04 +#define MS_STOP 0x08 +#define SPI_CLR_ERR 0x10 +#define XD_CLR_ERR 0x20 +#define SD_CLR_ERR 0x40 +#define MS_CLR_ERR 0x80 + +/* Card Data Source Register */ +#define PINGPONG_BUFFER 0x01 +#define RING_BUFFER 0x00 + +/* Card Power Control Register */ +#define PMOS_STRG_MASK 0x10 +#define PMOS_STRG_800mA 0x10 +#define PMOS_STRG_400mA 0x00 +#define SD_POWER_OFF 0x03 +#define SD_PARTIAL_POWER_ON 0x01 +#define SD_POWER_ON 0x00 +#define SD_POWER_MASK 0x03 +#define MS_POWER_OFF 0x0C +#define MS_PARTIAL_POWER_ON 0x04 +#define MS_POWER_ON 0x00 +#define MS_POWER_MASK 0x0C +#define BPP_POWER_OFF 0x0F +#define BPP_POWER_5_PERCENT_ON 0x0E +#define BPP_POWER_10_PERCENT_ON 0x0C +#define BPP_POWER_15_PERCENT_ON 0x08 +#define BPP_POWER_ON 0x00 +#define BPP_POWER_MASK 0x0F + +/* PWR_GATE_CTRL */ +#define PWR_GATE_EN 0x01 +#define LDO3318_PWR_MASK 0x06 +#define LDO_ON 0x00 +#define LDO_SUSPEND 0x04 +#define LDO_OFF 0x06 + +/* CARD_CLK_SOURCE */ +#define CRC_FIX_CLK (0x00 << 0) +#define CRC_VAR_CLK0 (0x01 << 0) +#define CRC_VAR_CLK1 (0x02 << 0) +#define SD30_FIX_CLK (0x00 << 2) +#define SD30_VAR_CLK0 (0x01 << 2) +#define SD30_VAR_CLK1 (0x02 << 2) +#define SAMPLE_FIX_CLK (0x00 << 4) +#define SAMPLE_VAR_CLK0 (0x01 << 4) +#define SAMPLE_VAR_CLK1 (0x02 << 4) + +#define MS_CFG 0xFD40 +#define MS_TPC 0xFD41 +#define MS_TRANS_CFG 0xFD42 +#define MS_TRANSFER 0xFD43 +#define MS_INT_REG 0xFD44 +#define MS_BYTE_CNT 0xFD45 +#define MS_SECTOR_CNT_L 0xFD46 +#define MS_SECTOR_CNT_H 0xFD47 +#define MS_DBUS_H 0xFD48 + +#define SD_CFG1 0xFDA0 +#define SD_CFG2 0xFDA1 +#define SD_CFG3 0xFDA2 +#define SD_STAT1 0xFDA3 +#define SD_STAT2 0xFDA4 +#define SD_BUS_STAT 0xFDA5 +#define SD_PAD_CTL 0xFDA6 +#define SD_SAMPLE_POINT_CTL 0xFDA7 +#define SD_PUSH_POINT_CTL 0xFDA8 +#define SD_CMD0 0xFDA9 +#define SD_CMD1 0xFDAA +#define SD_CMD2 0xFDAB +#define SD_CMD3 0xFDAC +#define SD_CMD4 0xFDAD +#define SD_CMD5 0xFDAE +#define SD_BYTE_CNT_L 0xFDAF +#define SD_BYTE_CNT_H 0xFDB0 +#define SD_BLOCK_CNT_L 0xFDB1 +#define SD_BLOCK_CNT_H 0xFDB2 +#define SD_TRANSFER 0xFDB3 +#define SD_CMD_STATE 0xFDB5 +#define SD_DATA_STATE 0xFDB6 + +#define SRCTL 0xFC13 + +#define DCM_DRP_CTL 0xFC23 +#define DCM_DRP_TRIG 0xFC24 +#define DCM_DRP_CFG 0xFC25 +#define DCM_DRP_WR_DATA_L 0xFC26 +#define DCM_DRP_WR_DATA_H 0xFC27 +#define DCM_DRP_RD_DATA_L 0xFC28 +#define DCM_DRP_RD_DATA_H 0xFC29 +#define SD_VPCLK0_CTL 0xFC2A +#define SD_VPCLK1_CTL 0xFC2B +#define SD_DCMPS0_CTL 0xFC2C +#define SD_DCMPS1_CTL 0xFC2D +#define SD_VPTX_CTL SD_VPCLK0_CTL +#define SD_VPRX_CTL SD_VPCLK1_CTL +#define SD_DCMPS_TX_CTL SD_DCMPS0_CTL +#define SD_DCMPS_RX_CTL SD_DCMPS1_CTL +#define CARD_CLK_SOURCE 0xFC2E + +#define CARD_PWR_CTL 0xFD50 +#define CARD_CLK_SWITCH 0xFD51 +#define CARD_SHARE_MODE 0xFD52 +#define CARD_DRIVE_SEL 0xFD53 +#define CARD_STOP 0xFD54 +#define CARD_OE 0xFD55 +#define CARD_AUTO_BLINK 0xFD56 +#define CARD_GPIO_DIR 0xFD57 +#define CARD_GPIO 0xFD58 +#define CARD_DATA_SOURCE 0xFD5B +#define CARD_SELECT 0xFD5C +#define SD30_DRIVE_SEL 0xFD5E +#define CARD_CLK_EN 0xFD69 +#define SDIO_CTRL 0xFD6B +#define CD_PAD_CTL 0xFD73 + +#define FPDCTL 0xFC00 +#define PDINFO 0xFC01 + +#define CLK_CTL 0xFC02 +#define CLK_DIV 0xFC03 +#define CLK_SEL 0xFC04 + +#define SSC_DIV_N_0 0xFC0F +#define SSC_DIV_N_1 0xFC10 +#define SSC_CTL1 0xFC11 +#define SSC_CTL2 0xFC12 + +#define RCCTL 0xFC14 + +#define FPGA_PULL_CTL 0xFC1D +#define OLT_LED_CTL 0xFC1E +#define GPIO_CTL 0xFC1F + +#define LDO_CTL 0xFC1E +#define SYS_VER 0xFC32 + +#define CARD_PULL_CTL1 0xFD60 +#define CARD_PULL_CTL2 0xFD61 +#define CARD_PULL_CTL3 0xFD62 +#define CARD_PULL_CTL4 0xFD63 +#define CARD_PULL_CTL5 0xFD64 +#define CARD_PULL_CTL6 0xFD65 + +/* PCI Express Related Registers */ +#define IRQEN0 0xFE20 +#define IRQSTAT0 0xFE21 +#define IRQEN1 0xFE22 +#define IRQSTAT1 0xFE23 +#define TLPRIEN 0xFE24 +#define TLPRISTAT 0xFE25 +#define TLPTIEN 0xFE26 +#define TLPTISTAT 0xFE27 +#define DMATC0 0xFE28 +#define DMATC1 0xFE29 +#define DMATC2 0xFE2A +#define DMATC3 0xFE2B +#define DMACTL 0xFE2C +#define BCTL 0xFE2D +#define RBBC0 0xFE2E +#define RBBC1 0xFE2F +#define RBDAT 0xFE30 +#define RBCTL 0xFE34 +#define CFGADDR0 0xFE35 +#define CFGADDR1 0xFE36 +#define CFGDATA0 0xFE37 +#define CFGDATA1 0xFE38 +#define CFGDATA2 0xFE39 +#define CFGDATA3 0xFE3A +#define CFGRWCTL 0xFE3B +#define PHYRWCTL 0xFE3C +#define PHYDATA0 0xFE3D +#define PHYDATA1 0xFE3E +#define PHYADDR 0xFE3F +#define MSGRXDATA0 0xFE40 +#define MSGRXDATA1 0xFE41 +#define MSGRXDATA2 0xFE42 +#define MSGRXDATA3 0xFE43 +#define MSGTXDATA0 0xFE44 +#define MSGTXDATA1 0xFE45 +#define MSGTXDATA2 0xFE46 +#define MSGTXDATA3 0xFE47 +#define MSGTXCTL 0xFE48 +#define PETXCFG 0xFE49 + +#define CDRESUMECTL 0xFE52 +#define WAKE_SEL_CTL 0xFE54 +#define PME_FORCE_CTL 0xFE56 +#define ASPM_FORCE_CTL 0xFE57 +#define PM_CLK_FORCE_CTL 0xFE58 +#define PERST_GLITCH_WIDTH 0xFE5C +#define CHANGE_LINK_STATE 0xFE5B +#define RESET_LOAD_REG 0xFE5E +#define EFUSE_CONTENT 0xFE5F +#define HOST_SLEEP_STATE 0xFE60 +#define SDIO_CFG 0xFE70 + +#define NFTS_TX_CTRL 0xFE72 + +#define PWR_GATE_CTRL 0xFE75 +#define PWD_SUSPEND_EN 0xFE76 +#define LDO_PWR_SEL 0xFE78 + +#define DUMMY_REG_RESET_0 0xFE90 + +/* Memory mapping */ +#define SRAM_BASE 0xE600 +#define RBUF_BASE 0xF400 +#define PPBUF_BASE1 0xF800 +#define PPBUF_BASE2 0xFA00 +#define IMAGE_FLAG_ADDR0 0xCE80 +#define IMAGE_FLAG_ADDR1 0xCE81 + +#define rtsx_pci_init_cmd(pcr) ((pcr)->ci = 0) + +struct rtsx_pcr; + +struct pcr_handle { + struct rtsx_pcr *pcr; +}; + +struct pcr_ops { + int (*extra_init_hw)(struct rtsx_pcr *pcr); + int (*optimize_phy)(struct rtsx_pcr *pcr); + int (*turn_on_led)(struct rtsx_pcr *pcr); + int (*turn_off_led)(struct rtsx_pcr *pcr); + int (*enable_auto_blink)(struct rtsx_pcr *pcr); + int (*disable_auto_blink)(struct rtsx_pcr *pcr); + int (*card_power_on)(struct rtsx_pcr *pcr, int card); + int (*card_power_off)(struct rtsx_pcr *pcr, int card); + unsigned int (*cd_deglitch)(struct rtsx_pcr *pcr); +}; + +enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN}; + +struct rtsx_pcr { + struct pci_dev *pci; + unsigned int id; + + /* pci resources */ + unsigned long addr; + void __iomem *remap_addr; + int irq; + + /* host reserved buffer */ + void *rtsx_resv_buf; + dma_addr_t rtsx_resv_buf_addr; + + void *host_cmds_ptr; + dma_addr_t host_cmds_addr; + int ci; + + void *host_sg_tbl_ptr; + dma_addr_t host_sg_tbl_addr; + int sgi; + + u32 bier; + char trans_result; + + unsigned int card_inserted; + unsigned int card_removed; + + struct delayed_work carddet_work; + struct delayed_work idle_work; + + spinlock_t lock; + struct mutex pcr_mutex; + struct completion *done; + struct completion *finish_me; + + unsigned int cur_clock; + bool ms_pmos; + bool remove_pci; + bool msi_en; + +#define EXTRA_CAPS_SD_SDR50 (1 << 0) +#define EXTRA_CAPS_SD_SDR104 (1 << 1) +#define EXTRA_CAPS_SD_DDR50 (1 << 2) +#define EXTRA_CAPS_MMC_HSDDR (1 << 3) +#define EXTRA_CAPS_MMC_HS200 (1 << 4) +#define EXTRA_CAPS_MMC_8BIT (1 << 5) + u32 extra_caps; + +#define IC_VER_A 0 +#define IC_VER_B 1 +#define IC_VER_C 2 +#define IC_VER_D 3 + u8 ic_version; + + const u32 *sd_pull_ctl_enable_tbl; + const u32 *sd_pull_ctl_disable_tbl; + const u32 *ms_pull_ctl_enable_tbl; + const u32 *ms_pull_ctl_disable_tbl; + + const struct pcr_ops *ops; + enum PDEV_STAT state; + + int num_slots; + struct rtsx_slot *slots; +}; + +#define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid)) +#define PCI_VID(pcr) ((pcr)->pci->vendor) +#define PCI_PID(pcr) ((pcr)->pci->device) + +void rtsx_pci_start_run(struct rtsx_pcr *pcr); +int rtsx_pci_write_register(struct rtsx_pcr *pcr, u16 addr, u8 mask, u8 data); +int rtsx_pci_read_register(struct rtsx_pcr *pcr, u16 addr, u8 *data); +int rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val); +int rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val); +void rtsx_pci_stop_cmd(struct rtsx_pcr *pcr); +void rtsx_pci_add_cmd(struct rtsx_pcr *pcr, + u8 cmd_type, u16 reg_addr, u8 mask, u8 data); +void rtsx_pci_send_cmd_no_wait(struct rtsx_pcr *pcr); +int rtsx_pci_send_cmd(struct rtsx_pcr *pcr, int timeout); +int rtsx_pci_transfer_data(struct rtsx_pcr *pcr, struct scatterlist *sglist, + int num_sg, bool read, int timeout); +int rtsx_pci_read_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); +int rtsx_pci_write_ppbuf(struct rtsx_pcr *pcr, u8 *buf, int buf_len); +int rtsx_pci_card_pull_ctl_enable(struct rtsx_pcr *pcr, int card); +int rtsx_pci_card_pull_ctl_disable(struct rtsx_pcr *pcr, int card); +int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock, + u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk); +int rtsx_pci_card_power_on(struct rtsx_pcr *pcr, int card); +int rtsx_pci_card_power_off(struct rtsx_pcr *pcr, int card); +unsigned int rtsx_pci_card_exist(struct rtsx_pcr *pcr); +void rtsx_pci_complete_unfinished_transfer(struct rtsx_pcr *pcr); + +static inline u8 *rtsx_pci_get_cmd_data(struct rtsx_pcr *pcr) +{ + return (u8 *)(pcr->host_cmds_ptr); +} + +#endif -- cgit v1.2.3 From 76f93992e4c44f30be797d5c99d6f369ed001747 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Mon, 5 Nov 2012 16:10:31 +0100 Subject: mfd: Provide the STMPE driver with its own IRQ domain The STMPE driver is yet another IRQ controller which requires its own IRQ domain. So, we provide it with one. Acked-by: Arnd Bergmann Acked-by: Linus Walleij Signed-off-by: Lee Jones Signed-off-by: Samuel Ortiz --- include/linux/mfd/stmpe.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index f8d5b4d5843f..15dac790365f 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -62,6 +62,7 @@ struct stmpe_client_info; * @lock: lock protecting I/O operations * @irq_lock: IRQ bus lock * @dev: device, mostly for dev_dbg() + * @irq_domain: IRQ domain * @client: client - i2c or spi * @ci: client specific information * @partnum: part number @@ -79,6 +80,7 @@ struct stmpe { struct mutex lock; struct mutex irq_lock; struct device *dev; + struct irq_domain *domain; void *client; struct stmpe_client_info *ci; enum stmpe_partnum partnum; -- cgit v1.2.3 From 90a38d999739f35f4fc925c875e6ee518546b66c Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 15 Oct 2012 22:44:45 +0200 Subject: mfd: Remove Unicode Byte Order Marks from da9055 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Older gcc (< 4.4) doesn't like files starting with Unicode BOMs: include/linux/mfd/da9055/core.h:1: error: stray ‘\357’ in program include/linux/mfd/da9055/core.h:1: error: stray ‘\273’ in program include/linux/mfd/da9055/core.h:1: error: stray ‘\277’ in program include/linux/mfd/da9055/pdata.h:1: error: stray ‘\357’ in program include/linux/mfd/da9055/pdata.h:1: error: stray ‘\273’ in program include/linux/mfd/da9055/pdata.h:1: error: stray ‘\277’ in program include/linux/mfd/da9055/reg.h:1: error: stray ‘\357’ in program include/linux/mfd/da9055/reg.h:1: error: stray ‘\273’ in program include/linux/mfd/da9055/reg.h:1: error: stray ‘\277’ in program Remove the BOMs, the rest of the files is plain ASCII anyway. Output of "file" before: include/linux/mfd/da9055/core.h: UTF-8 Unicode (with BOM) C program text include/linux/mfd/da9055/pdata.h: UTF-8 Unicode (with BOM) C program text include/linux/mfd/da9055/reg.h: UTF-8 Unicode (with BOM) C program text Output of "file" after: include/linux/mfd/da9055/core.h: ASCII C program text include/linux/mfd/da9055/pdata.h: ASCII C program text include/linux/mfd/da9055/reg.h: ASCII C program text Signed-off-by: Geert Uytterhoeven Signed-off-by: Samuel Ortiz --- include/linux/mfd/da9055/core.h | 2 +- include/linux/mfd/da9055/pdata.h | 2 +- include/linux/mfd/da9055/reg.h | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/da9055/core.h b/include/linux/mfd/da9055/core.h index c96ad682c59e..956afa445998 100644 --- a/include/linux/mfd/da9055/core.h +++ b/include/linux/mfd/da9055/core.h @@ -1,4 +1,4 @@ -/* +/* * da9055 declarations for DA9055 PMICs. * * Copyright(c) 2012 Dialog Semiconductor Ltd. diff --git a/include/linux/mfd/da9055/pdata.h b/include/linux/mfd/da9055/pdata.h index 147293b4471d..b9b204edb4e9 100644 --- a/include/linux/mfd/da9055/pdata.h +++ b/include/linux/mfd/da9055/pdata.h @@ -1,4 +1,4 @@ -/* Copyright (C) 2012 Dialog Semiconductor Ltd. +/* Copyright (C) 2012 Dialog Semiconductor Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/include/linux/mfd/da9055/reg.h b/include/linux/mfd/da9055/reg.h index df237ee54803..2b592e072dbf 100644 --- a/include/linux/mfd/da9055/reg.h +++ b/include/linux/mfd/da9055/reg.h @@ -1,4 +1,4 @@ -/* +/* * DA9055 declarations for DA9055 PMICs. * * Copyright(c) 2012 Dialog Semiconductor Ltd. -- cgit v1.2.3 From ab7edb149c7548541ee588b8372c2041b6f1cbc8 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Thu, 11 Oct 2012 13:55:32 +0200 Subject: mfd: twl6040: Convert to use regmap_irq With regmap_irq it is possible to remove the twl6040-irq.c file and simplify the code. Signed-off-by: Peter Ujfalusi Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/twl6040.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h index a8eff4ad9be5..94ac944d12f0 100644 --- a/include/linux/mfd/twl6040.h +++ b/include/linux/mfd/twl6040.h @@ -207,10 +207,12 @@ struct twl6040_platform_data { }; struct regmap; +struct regmap_irq_chips_data; struct twl6040 { struct device *dev; struct regmap *regmap; + struct regmap_irq_chip_data *irq_data; struct regulator_bulk_data supplies[2]; /* supplies for vio, v2v1 */ struct mutex mutex; struct mutex irq_mutex; @@ -228,9 +230,8 @@ struct twl6040 { unsigned int mclk; unsigned int irq; - unsigned int irq_base; - u8 irq_masks_cur; - u8 irq_masks_cache; + unsigned int irq_ready; + unsigned int irq_th; }; int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg); @@ -245,8 +246,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id, unsigned int freq_in, unsigned int freq_out); int twl6040_get_pll(struct twl6040 *twl6040); unsigned int twl6040_get_sysclk(struct twl6040 *twl6040); -int twl6040_irq_init(struct twl6040 *twl6040); -void twl6040_irq_exit(struct twl6040 *twl6040); + /* Get the combined status of the vibra control register */ int twl6040_get_vibralr_status(struct twl6040 *twl6040); -- cgit v1.2.3 From 605511a848ae3ac4b2ce272ae6cbf8930b29ebb3 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 13 Nov 2012 19:18:05 +0530 Subject: mfd: Convert tps6586x to irq_domain Allocate the irq base if it base is not porvided i.e. in case of device tree invocation of this driver. Convert the tps6586x driver to irq domain, using a legacy IRQ mapping if an irq_base is specified in platform data or dynamically allocated and otherwise using a linear mapping. Signed-off-by: Laxman Dewangan Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/tps6586x.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/tps6586x.h b/include/linux/mfd/tps6586x.h index 2dd123194958..ebd8b08a386b 100644 --- a/include/linux/mfd/tps6586x.h +++ b/include/linux/mfd/tps6586x.h @@ -93,5 +93,6 @@ extern int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask); extern int tps6586x_clr_bits(struct device *dev, int reg, uint8_t bit_mask); extern int tps6586x_update(struct device *dev, int reg, uint8_t val, uint8_t mask); +extern int tps6586x_irq_get_virq(struct device *dev, int irq); #endif /*__LINUX_MFD_TPS6586X_H */ -- cgit v1.2.3 From 43c1af0f4861b721def8c67ed6af2a69a4efcca3 Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 13 Nov 2012 19:33:57 +0530 Subject: mfd: tps65910: Use regmap irq framework for interrupt support Implement irq support of tps65910 with regmap irq framework in place of implementing locally. This reduces the code size significantly and easy to maintain. Signed-off-by: Laxman Dewangan Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/tps65910.h | 139 ++++++++++++++++++++++++++++++------------- 1 file changed, 99 insertions(+), 40 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index 02e894f3ff45..b564ac29590a 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -572,6 +572,49 @@ #define SPARE_SPARE_MASK 0xFF #define SPARE_SPARE_SHIFT 0 +#define TPS65910_INT_STS_RTC_PERIOD_IT_MASK 0x80 +#define TPS65910_INT_STS_RTC_PERIOD_IT_SHIFT 7 +#define TPS65910_INT_STS_RTC_ALARM_IT_MASK 0x40 +#define TPS65910_INT_STS_RTC_ALARM_IT_SHIFT 6 +#define TPS65910_INT_STS_HOTDIE_IT_MASK 0x20 +#define TPS65910_INT_STS_HOTDIE_IT_SHIFT 5 +#define TPS65910_INT_STS_PWRHOLD_F_IT_MASK 0x10 +#define TPS65910_INT_STS_PWRHOLD_F_IT_SHIFT 4 +#define TPS65910_INT_STS_PWRON_LP_IT_MASK 0x08 +#define TPS65910_INT_STS_PWRON_LP_IT_SHIFT 3 +#define TPS65910_INT_STS_PWRON_IT_MASK 0x04 +#define TPS65910_INT_STS_PWRON_IT_SHIFT 2 +#define TPS65910_INT_STS_VMBHI_IT_MASK 0x02 +#define TPS65910_INT_STS_VMBHI_IT_SHIFT 1 +#define TPS65910_INT_STS_VMBDCH_IT_MASK 0x01 +#define TPS65910_INT_STS_VMBDCH_IT_SHIFT 0 + +#define TPS65910_INT_MSK_RTC_PERIOD_IT_MSK_MASK 0x80 +#define TPS65910_INT_MSK_RTC_PERIOD_IT_MSK_SHIFT 7 +#define TPS65910_INT_MSK_RTC_ALARM_IT_MSK_MASK 0x40 +#define TPS65910_INT_MSK_RTC_ALARM_IT_MSK_SHIFT 6 +#define TPS65910_INT_MSK_HOTDIE_IT_MSK_MASK 0x20 +#define TPS65910_INT_MSK_HOTDIE_IT_MSK_SHIFT 5 +#define TPS65910_INT_MSK_PWRHOLD_IT_MSK_MASK 0x10 +#define TPS65910_INT_MSK_PWRHOLD_IT_MSK_SHIFT 4 +#define TPS65910_INT_MSK_PWRON_LP_IT_MSK_MASK 0x08 +#define TPS65910_INT_MSK_PWRON_LP_IT_MSK_SHIFT 3 +#define TPS65910_INT_MSK_PWRON_IT_MSK_MASK 0x04 +#define TPS65910_INT_MSK_PWRON_IT_MSK_SHIFT 2 +#define TPS65910_INT_MSK_VMBHI_IT_MSK_MASK 0x02 +#define TPS65910_INT_MSK_VMBHI_IT_MSK_SHIFT 1 +#define TPS65910_INT_MSK_VMBDCH_IT_MSK_MASK 0x01 +#define TPS65910_INT_MSK_VMBDCH_IT_MSK_SHIFT 0 + +#define TPS65910_INT_STS2_GPIO0_F_IT_SHIFT 2 +#define TPS65910_INT_STS2_GPIO0_F_IT_MASK 0x02 +#define TPS65910_INT_STS2_GPIO0_R_IT_SHIFT 1 +#define TPS65910_INT_STS2_GPIO0_R_IT_MASK 0x01 + +#define TPS65910_INT_MSK2_GPIO0_F_IT_MSK_SHIFT 2 +#define TPS65910_INT_MSK2_GPIO0_F_IT_MSK_MASK 0x02 +#define TPS65910_INT_MSK2_GPIO0_R_IT_MSK_SHIFT 1 +#define TPS65910_INT_MSK2_GPIO0_R_IT_MSK_MASK 0x01 /*Register INT_STS (0x80) register.RegisterDescription */ #define INT_STS_RTC_PERIOD_IT_MASK 0x80 @@ -580,16 +623,16 @@ #define INT_STS_RTC_ALARM_IT_SHIFT 6 #define INT_STS_HOTDIE_IT_MASK 0x20 #define INT_STS_HOTDIE_IT_SHIFT 5 -#define INT_STS_PWRHOLD_IT_MASK 0x10 -#define INT_STS_PWRHOLD_IT_SHIFT 4 +#define INT_STS_PWRHOLD_R_IT_MASK 0x10 +#define INT_STS_PWRHOLD_R_IT_SHIFT 4 #define INT_STS_PWRON_LP_IT_MASK 0x08 #define INT_STS_PWRON_LP_IT_SHIFT 3 #define INT_STS_PWRON_IT_MASK 0x04 #define INT_STS_PWRON_IT_SHIFT 2 #define INT_STS_VMBHI_IT_MASK 0x02 #define INT_STS_VMBHI_IT_SHIFT 1 -#define INT_STS_VMBDCH_IT_MASK 0x01 -#define INT_STS_VMBDCH_IT_SHIFT 0 +#define INT_STS_PWRHOLD_F_IT_MASK 0x01 +#define INT_STS_PWRHOLD_F_IT_SHIFT 0 /*Register INT_MSK (0x80) register.RegisterDescription */ @@ -599,16 +642,16 @@ #define INT_MSK_RTC_ALARM_IT_MSK_SHIFT 6 #define INT_MSK_HOTDIE_IT_MSK_MASK 0x20 #define INT_MSK_HOTDIE_IT_MSK_SHIFT 5 -#define INT_MSK_PWRHOLD_IT_MSK_MASK 0x10 -#define INT_MSK_PWRHOLD_IT_MSK_SHIFT 4 +#define INT_MSK_PWRHOLD_R_IT_MSK_MASK 0x10 +#define INT_MSK_PWRHOLD_R_IT_MSK_SHIFT 4 #define INT_MSK_PWRON_LP_IT_MSK_MASK 0x08 #define INT_MSK_PWRON_LP_IT_MSK_SHIFT 3 #define INT_MSK_PWRON_IT_MSK_MASK 0x04 #define INT_MSK_PWRON_IT_MSK_SHIFT 2 #define INT_MSK_VMBHI_IT_MSK_MASK 0x02 #define INT_MSK_VMBHI_IT_MSK_SHIFT 1 -#define INT_MSK_VMBDCH_IT_MSK_MASK 0x01 -#define INT_MSK_VMBDCH_IT_MSK_SHIFT 0 +#define INT_MSK_PWRHOLD_F_IT_MSK_MASK 0x01 +#define INT_MSK_PWRHOLD_F_IT_MSK_SHIFT 0 /*Register INT_STS2 (0x80) register.RegisterDescription */ @@ -650,6 +693,14 @@ /*Register INT_STS3 (0x80) register.RegisterDescription */ +#define INT_STS3_PWRDN_IT_MASK 0x80 +#define INT_STS3_PWRDN_IT_SHIFT 7 +#define INT_STS3_VMBCH2_L_IT_MASK 0x40 +#define INT_STS3_VMBCH2_L_IT_SHIFT 6 +#define INT_STS3_VMBCH2_H_IT_MASK 0x20 +#define INT_STS3_VMBCH2_H_IT_SHIFT 5 +#define INT_STS3_WTCHDG_IT_MASK 0x10 +#define INT_STS3_WTCHDG_IT_SHIFT 4 #define INT_STS3_GPIO5_F_IT_MASK 0x08 #define INT_STS3_GPIO5_F_IT_SHIFT 3 #define INT_STS3_GPIO5_R_IT_MASK 0x04 @@ -661,6 +712,14 @@ /*Register INT_MSK3 (0x80) register.RegisterDescription */ +#define INT_MSK3_PWRDN_IT_MSK_MASK 0x80 +#define INT_MSK3_PWRDN_IT_MSK_SHIFT 7 +#define INT_MSK3_VMBCH2_L_IT_MSK_MASK 0x40 +#define INT_MSK3_VMBCH2_L_IT_MSK_SHIFT 6 +#define INT_MSK3_VMBCH2_H_IT_MSK_MASK 0x20 +#define INT_MSK3_VMBCH2_H_IT_MSK_SHIFT 5 +#define INT_MSK3_WTCHDG_IT_MSK_MASK 0x10 +#define INT_MSK3_WTCHDG_IT_MSK_SHIFT 4 #define INT_MSK3_GPIO5_F_IT_MSK_MASK 0x08 #define INT_MSK3_GPIO5_F_IT_MSK_SHIFT 3 #define INT_MSK3_GPIO5_R_IT_MSK_MASK 0x04 @@ -721,34 +780,32 @@ #define TPS65910_IRQ_GPIO_F 9 #define TPS65910_NUM_IRQ 10 -#define TPS65911_IRQ_VBAT_VMBDCH 0 -#define TPS65911_IRQ_VBAT_VMBDCH2L 1 -#define TPS65911_IRQ_VBAT_VMBDCH2H 2 -#define TPS65911_IRQ_VBAT_VMHI 3 -#define TPS65911_IRQ_PWRON 4 -#define TPS65911_IRQ_PWRON_LP 5 -#define TPS65911_IRQ_PWRHOLD_F 6 -#define TPS65911_IRQ_PWRHOLD_R 7 -#define TPS65911_IRQ_HOTDIE 8 -#define TPS65911_IRQ_RTC_ALARM 9 -#define TPS65911_IRQ_RTC_PERIOD 10 -#define TPS65911_IRQ_GPIO0_R 11 -#define TPS65911_IRQ_GPIO0_F 12 -#define TPS65911_IRQ_GPIO1_R 13 -#define TPS65911_IRQ_GPIO1_F 14 -#define TPS65911_IRQ_GPIO2_R 15 -#define TPS65911_IRQ_GPIO2_F 16 -#define TPS65911_IRQ_GPIO3_R 17 -#define TPS65911_IRQ_GPIO3_F 18 -#define TPS65911_IRQ_GPIO4_R 19 -#define TPS65911_IRQ_GPIO4_F 20 -#define TPS65911_IRQ_GPIO5_R 21 -#define TPS65911_IRQ_GPIO5_F 22 -#define TPS65911_IRQ_WTCHDG 23 -#define TPS65911_IRQ_PWRDN 24 - -#define TPS65911_NUM_IRQ 25 - +#define TPS65911_IRQ_PWRHOLD_F 0 +#define TPS65911_IRQ_VBAT_VMHI 1 +#define TPS65911_IRQ_PWRON 2 +#define TPS65911_IRQ_PWRON_LP 3 +#define TPS65911_IRQ_PWRHOLD_R 4 +#define TPS65911_IRQ_HOTDIE 5 +#define TPS65911_IRQ_RTC_ALARM 6 +#define TPS65911_IRQ_RTC_PERIOD 7 +#define TPS65911_IRQ_GPIO0_R 8 +#define TPS65911_IRQ_GPIO0_F 9 +#define TPS65911_IRQ_GPIO1_R 10 +#define TPS65911_IRQ_GPIO1_F 11 +#define TPS65911_IRQ_GPIO2_R 12 +#define TPS65911_IRQ_GPIO2_F 13 +#define TPS65911_IRQ_GPIO3_R 14 +#define TPS65911_IRQ_GPIO3_F 15 +#define TPS65911_IRQ_GPIO4_R 16 +#define TPS65911_IRQ_GPIO4_F 17 +#define TPS65911_IRQ_GPIO5_R 18 +#define TPS65911_IRQ_GPIO5_F 19 +#define TPS65911_IRQ_WTCHDG 20 +#define TPS65911_IRQ_VMBCH2_H 21 +#define TPS65911_IRQ_VMBCH2_L 22 +#define TPS65911_IRQ_PWRDN 23 + +#define TPS65911_NUM_IRQ 24 /* GPIO Register Definitions */ #define TPS65910_GPIO_DEB BIT(2) @@ -848,11 +905,8 @@ struct tps65910 { struct tps65910_board *of_plat_data; /* IRQ Handling */ - struct mutex irq_lock; int chip_irq; - int irq_base; - int irq_num; - u32 irq_mask; + struct regmap_irq_chip_data *irq_data; struct irq_domain *domain; }; @@ -900,4 +954,9 @@ static inline int tps65910_reg_update_bits(struct tps65910 *tps65910, u8 reg, return regmap_update_bits(tps65910->regmap, reg, mask, val); } +static inline int tps65910_irq_get_virq(struct tps65910 *tps65910, int irq) +{ + return regmap_irq_get_virq(tps65910->irq_data, irq); +} + #endif /* __LINUX_MFD_TPS65910_H */ -- cgit v1.2.3 From 4aab3fadad32ff4df05832beff7c16fd6ad938aa Mon Sep 17 00:00:00 2001 From: Laxman Dewangan Date: Tue, 13 Nov 2012 19:33:58 +0530 Subject: mfd: tps65910: Move interrupt implementation code to mfd file In place of implementing the irq support in separate file, moving implementation to main mfd file. The irq files only contains the table and init steps only and does not need extra file to have this only for this purpose. Signed-off-by: Laxman Dewangan Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/tps65910.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/tps65910.h b/include/linux/mfd/tps65910.h index b564ac29590a..0b16903f7e88 100644 --- a/include/linux/mfd/tps65910.h +++ b/include/linux/mfd/tps65910.h @@ -915,10 +915,6 @@ struct tps65910_platform_data { int irq_base; }; -int tps65910_irq_init(struct tps65910 *tps65910, int irq, - struct tps65910_platform_data *pdata); -int tps65910_irq_exit(struct tps65910 *tps65910); - static inline int tps65910_chip_id(struct tps65910 *tps65910) { return tps65910->id; -- cgit v1.2.3 From 8bad1abd6303476d6f77878aa8ea737d5d1b625c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 4 Oct 2012 00:15:05 -0300 Subject: mfd: da9052: Introduce da9052-irq.c Create a da9052-irq.c file so that it can handle interrupt related functions. This is useful for allowing the da9052 drivers to use such functions when dealing with da9052 interrupts. Signed-off-by: Fabio Estevam Acked-by: Arnd Bergmann Reviewed-by: Mark Brown Signed-off-by: Samuel Ortiz --- include/linux/mfd/da9052/da9052.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/da9052/da9052.h b/include/linux/mfd/da9052/da9052.h index 0507c4c21a7d..86dd93de6ff2 100644 --- a/include/linux/mfd/da9052/da9052.h +++ b/include/linux/mfd/da9052/da9052.h @@ -146,4 +146,14 @@ void da9052_device_exit(struct da9052 *da9052); extern struct regmap_config da9052_regmap_config; +int da9052_irq_init(struct da9052 *da9052); +int da9052_irq_exit(struct da9052 *da9052); +int da9052_request_irq(struct da9052 *da9052, int irq, char *name, + irq_handler_t handler, void *data); +void da9052_free_irq(struct da9052 *da9052, int irq, void *data); + +int da9052_enable_irq(struct da9052 *da9052, int irq); +int da9052_disable_irq(struct da9052 *da9052, int irq); +int da9052_disable_irq_nosync(struct da9052 *da9052, int irq); + #endif /* __MFD_DA9052_DA9052_H */ -- cgit v1.2.3 From f01312d846016dbd38cc9865e580298fb61f2aa7 Mon Sep 17 00:00:00 2001 From: Lars Poeschel Date: Mon, 5 Nov 2012 15:48:23 +0100 Subject: mfd: Add viperboard driver Add mfd driver for Nano River Technologies viperboard. Signed-off-by: Lars Poeschel Signed-off-by: Samuel Ortiz --- include/linux/mfd/viperboard.h | 105 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 105 insertions(+) create mode 100644 include/linux/mfd/viperboard.h (limited to 'include/linux') diff --git a/include/linux/mfd/viperboard.h b/include/linux/mfd/viperboard.h new file mode 100644 index 000000000000..0d1342466db5 --- /dev/null +++ b/include/linux/mfd/viperboard.h @@ -0,0 +1,105 @@ +/* + * include/linux/mfd/viperboard.h + * + * Nano River Technologies viperboard definitions + * + * (C) 2012 by Lemonage GmbH + * Author: Lars Poeschel + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_VIPERBOARD_H__ +#define __MFD_VIPERBOARD_H__ + +#include +#include + +#define VPRBRD_EP_OUT 0x02 +#define VPRBRD_EP_IN 0x86 + +#define VPRBRD_I2C_MSG_LEN 512 /* max length of a msg on USB level */ + +#define VPRBRD_I2C_FREQ_6MHZ 1 /* 6 MBit/s */ +#define VPRBRD_I2C_FREQ_3MHZ 2 /* 3 MBit/s */ +#define VPRBRD_I2C_FREQ_1MHZ 3 /* 1 MBit/s */ +#define VPRBRD_I2C_FREQ_FAST 4 /* 400 kbit/s */ +#define VPRBRD_I2C_FREQ_400KHZ VPRBRD_I2C_FREQ_FAST +#define VPRBRD_I2C_FREQ_200KHZ 5 /* 200 kbit/s */ +#define VPRBRD_I2C_FREQ_STD 6 /* 100 kbit/s */ +#define VPRBRD_I2C_FREQ_100KHZ VPRBRD_I2C_FREQ_STD +#define VPRBRD_I2C_FREQ_10KHZ 7 /* 10 kbit/s */ + +#define VPRBRD_I2C_CMD_WRITE 0x00 +#define VPRBRD_I2C_CMD_READ 0x01 +#define VPRBRD_I2C_CMD_ADDR 0x02 + +#define VPRBRD_USB_TYPE_OUT 0x40 +#define VPRBRD_USB_TYPE_IN 0xc0 +#define VPRBRD_USB_TIMEOUT_MS 100 +#define VPRBRD_USB_REQUEST_MAJOR 0xea +#define VPRBRD_USB_REQUEST_MINOR 0xeb + +struct vprbrd_i2c_write_hdr { + u8 cmd; + u16 addr; + u8 len1; + u8 len2; + u8 last; + u8 chan; + u16 spi; +} __packed; + +struct vprbrd_i2c_read_hdr { + u8 cmd; + u16 addr; + u8 len0; + u8 len1; + u8 len2; + u8 len3; + u8 len4; + u8 len5; + u16 tf1; /* transfer 1 length */ + u16 tf2; /* transfer 2 length */ +} __packed; + +struct vprbrd_i2c_status { + u8 unknown[11]; + u8 status; +} __packed; + +struct vprbrd_i2c_write_msg { + struct vprbrd_i2c_write_hdr header; + u8 data[VPRBRD_I2C_MSG_LEN + - sizeof(struct vprbrd_i2c_write_hdr)]; +} __packed; + +struct vprbrd_i2c_read_msg { + struct vprbrd_i2c_read_hdr header; + u8 data[VPRBRD_I2C_MSG_LEN + - sizeof(struct vprbrd_i2c_read_hdr)]; +} __packed; + +struct vprbrd_i2c_addr_msg { + u8 cmd; + u8 addr; + u8 unknown1; + u16 len; + u8 unknown2; + u8 unknown3; +} __packed; + +/* Structure to hold all device specific stuff */ +struct vprbrd { + struct usb_device *usb_dev; /* the usb device for this device */ + struct mutex lock; + u8 buf[sizeof(struct vprbrd_i2c_write_msg)]; + struct platform_device pdev; +}; + +#endif /* __MFD_VIPERBOARD_H__ */ -- cgit v1.2.3 From 9d5b72de0d1627b130fa69c5edf58b5b2df4ca50 Mon Sep 17 00:00:00 2001 From: Lars Poeschel Date: Mon, 5 Nov 2012 15:48:24 +0100 Subject: gpio: Add viperboard gpio driver This adds the mfd cell to use the gpio a and gpio b part of the Nano River Technologies viperboard. Signed-off-by: Lars Poeschel Reviewed-by: Linus Walleij Signed-off-by: Samuel Ortiz --- include/linux/mfd/viperboard.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/viperboard.h b/include/linux/mfd/viperboard.h index 0d1342466db5..42d339fac3e5 100644 --- a/include/linux/mfd/viperboard.h +++ b/include/linux/mfd/viperboard.h @@ -44,6 +44,8 @@ #define VPRBRD_USB_TIMEOUT_MS 100 #define VPRBRD_USB_REQUEST_MAJOR 0xea #define VPRBRD_USB_REQUEST_MINOR 0xeb +#define VPRBRD_USB_REQUEST_GPIOA 0xed +#define VPRBRD_USB_REQUEST_GPIOB 0xdd struct vprbrd_i2c_write_hdr { u8 cmd; -- cgit v1.2.3 From 174a13aa8669331605b138aaf61569dd7189e453 Mon Sep 17 00:00:00 2001 From: Lars Poeschel Date: Mon, 19 Nov 2012 16:36:04 +0100 Subject: i2c: Add viperboard i2c master driver This adds the mfd cell to use the i2c part of the Nano River Technologies viperboard as i2c master. Signed-off-by: Lars Poeschel Signed-off-by: Samuel Ortiz --- include/linux/mfd/viperboard.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/viperboard.h b/include/linux/mfd/viperboard.h index 42d339fac3e5..ef7851430d86 100644 --- a/include/linux/mfd/viperboard.h +++ b/include/linux/mfd/viperboard.h @@ -42,6 +42,8 @@ #define VPRBRD_USB_TYPE_OUT 0x40 #define VPRBRD_USB_TYPE_IN 0xc0 #define VPRBRD_USB_TIMEOUT_MS 100 +#define VPRBRD_USB_REQUEST_I2C_FREQ 0xe6 +#define VPRBRD_USB_REQUEST_I2C 0xe9 #define VPRBRD_USB_REQUEST_MAJOR 0xea #define VPRBRD_USB_REQUEST_MINOR 0xeb #define VPRBRD_USB_REQUEST_GPIOA 0xed -- cgit v1.2.3 From ffd8a6e7a77802dd09559be78dea63956aa8f1d5 Mon Sep 17 00:00:00 2001 From: Lars Poeschel Date: Mon, 5 Nov 2012 15:48:26 +0100 Subject: iio: adc: Add viperboard adc driver This adds the mfd cell to use the adc part of the Nano River Technologies viperboard. Signed-off-by: Lars Poeschel Reviewed-by: Lars-Peter Clausen Acked-by: Jonathan Cameron Signed-off-by: Samuel Ortiz --- include/linux/mfd/viperboard.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mfd/viperboard.h b/include/linux/mfd/viperboard.h index ef7851430d86..193452848c04 100644 --- a/include/linux/mfd/viperboard.h +++ b/include/linux/mfd/viperboard.h @@ -46,6 +46,7 @@ #define VPRBRD_USB_REQUEST_I2C 0xe9 #define VPRBRD_USB_REQUEST_MAJOR 0xea #define VPRBRD_USB_REQUEST_MINOR 0xeb +#define VPRBRD_USB_REQUEST_ADC 0xec #define VPRBRD_USB_REQUEST_GPIOA 0xed #define VPRBRD_USB_REQUEST_GPIOB 0xdd -- cgit v1.2.3 From 1950c7164646bfeeb82c34bc299d82119706afb5 Mon Sep 17 00:00:00 2001 From: Davide Ciminaghi Date: Fri, 9 Nov 2012 15:19:52 +0100 Subject: mfd: sta2x11-mfd: Add apb-soc regs driver and factor out common code A driver for the apb-soc registers is needed by the clock infrastructure code to configure and control clocks on the sta2x11 chip. Since some of the functions in sta2x11-mfd.c were almost identical for the two existing platform devices, the following changes have been performed to avoid further code duplication while adding the apb-soc-regs driver: * The sctl_regs and apbreg_regs fields in struct sta2x11_mfd have been turned into just one array of pointers accessed by device index. * Platform probe methods have become one-liners invoking a common probe with the device's index as second parameter. * For loops have been inserted where the same operations were performed for each of the two bars of a pci device. * The apbreg_mask and sctl_mask functions were almost identical, so they were turned into inline functions invoking a common __sta2x11_mfd_mask() with the platform device's index as last parameter. To do this, enum sta2x11_mfd_plat_dev has been declared in sta2x11-mfd.h and more device types have been added to it. Reviewed-by: Mark Brown Signed-off-by: Davide Ciminaghi Acked-by: Alessandro Rubini Signed-off-by: Samuel Ortiz --- include/linux/mfd/sta2x11-mfd.h | 156 +++++++++++++++++++++++++++++++++++++++- 1 file changed, 154 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mfd/sta2x11-mfd.h b/include/linux/mfd/sta2x11-mfd.h index d179227e866f..4d858797d7e2 100644 --- a/include