From 6ecec74520d8a357726e6c12f99080dbe7b347dd Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Wed, 26 Sep 2012 12:49:27 -0600 Subject: NVMe: Define SMART log This data structure is defined in the NVMe specification. It's not used by the kernel, but is available for use by userspace software. Signed-off-by: Keith Busch Signed-off-by: Matthew Wilcox --- include/linux/nvme.h | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nvme.h b/include/linux/nvme.h index c25cccaa555a..4fa3b0b9b071 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -137,6 +137,34 @@ enum { NVME_LBAF_RP_DEGRADED = 3, }; +struct nvme_smart_log { + __u8 critical_warning; + __u8 temperature[2]; + __u8 avail_spare; + __u8 spare_thresh; + __u8 percent_used; + __u8 rsvd6[26]; + __u8 data_units_read[16]; + __u8 data_units_written[16]; + __u8 host_reads[16]; + __u8 host_writes[16]; + __u8 ctrl_busy_time[16]; + __u8 power_cycles[16]; + __u8 power_on_hours[16]; + __u8 unsafe_shutdowns[16]; + __u8 media_errors[16]; + __u8 num_err_log_entries[16]; + __u8 rsvd192[320]; +}; + +enum { + NVME_SMART_CRIT_SPARE = 1 << 0, + NVME_SMART_CRIT_TEMPERATURE = 1 << 1, + NVME_SMART_CRIT_RELIABILITY = 1 << 2, + NVME_SMART_CRIT_MEDIA = 1 << 3, + NVME_SMART_CRIT_VOLATILE_MEMORY = 1 << 4, +}; + struct nvme_lba_range_type { __u8 type; __u8 attributes; -- cgit v1.2.3 From 9807a54cd74149988f5d20088bf7a7957c205bfb Mon Sep 17 00:00:00 2001 From: Jarno Rajahalme Date: Mon, 7 Jan 2013 09:54:31 -0800 Subject: linux/openvswitch.h: Make OVSP_LOCAL 32-bit. OVS ports are now 32-bit, so OVSP_LOCAL should be too. (Internally, kernel module still keeps port numbers 16-bit, though.) Signed-off-by: Jarno Rajahalme Signed-off-by: Jesse Gross --- include/linux/openvswitch.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/openvswitch.h b/include/linux/openvswitch.h index d42e174bd0c8..99e6414a40d9 100644 --- a/include/linux/openvswitch.h +++ b/include/linux/openvswitch.h @@ -94,7 +94,7 @@ struct ovs_vport_stats { }; /* Fixed logical ports. */ -#define OVSP_LOCAL ((__u16)0) +#define OVSP_LOCAL ((__u32)0) /* Packet transfer. */ -- cgit v1.2.3 From 345046673449b5c35840e5cc34a60059cbec9305 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 10 Jan 2013 19:00:53 +0000 Subject: slab: Move kmalloc related function defs Move these functions higher up in slab.h so that they are grouped with other generic kmalloc related definitions. Acked-by: Glauber Costa Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slab.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/slab.h b/include/linux/slab.h index 5d168d7e0a28..ccbb37685c6c 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -147,6 +147,15 @@ void kmem_cache_free(struct kmem_cache *, void *); sizeof(struct __struct), __alignof__(struct __struct),\ (__flags), NULL) +/* + * Common kmalloc functions provided by all allocators + */ +void * __must_check __krealloc(const void *, size_t, gfp_t); +void * __must_check krealloc(const void *, size_t, gfp_t); +void kfree(const void *); +void kzfree(const void *); +size_t ksize(const void *); + /* * The largest kmalloc size supported by the slab allocators is * 32 megabyte (2^25) or the maximum allocatable page order if that is @@ -224,15 +233,6 @@ struct seq_file; int cache_show(struct kmem_cache *s, struct seq_file *m); void print_slabinfo_header(struct seq_file *m); -/* - * Common kmalloc functions provided by all allocators - */ -void * __must_check __krealloc(const void *, size_t, gfp_t); -void * __must_check krealloc(const void *, size_t, gfp_t); -void kfree(const void *); -void kzfree(const void *); -size_t ksize(const void *); - /* * Allocator specific definitions. These are mainly used to establish optimized * ways to convert kmalloc() calls to kmem_cache_alloc() invocations by -- cgit v1.2.3 From ce6a50263d4ddeba1f0d08f16716a82770c03690 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 10 Jan 2013 19:14:19 +0000 Subject: slab: Common kmalloc slab index determination Extract the function to determine the index of the slab within the array of kmalloc caches as well as a function to determine maximum object size from the nr of the kmalloc slab. This is used here only to simplify slub bootstrap but will be used later also for SLAB. Acked-by: Glauber Costa Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slab.h | 172 +++++++++++++++++++++++++++++++++-------------- include/linux/slub_def.h | 63 ----------------- 2 files changed, 122 insertions(+), 113 deletions(-) (limited to 'include/linux') diff --git a/include/linux/slab.h b/include/linux/slab.h index ccbb37685c6c..c97fe92532d1 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -94,29 +94,6 @@ #define ZERO_OR_NULL_PTR(x) ((unsigned long)(x) <= \ (unsigned long)ZERO_SIZE_PTR) -/* - * Common fields provided in kmem_cache by all slab allocators - * This struct is either used directly by the allocator (SLOB) - * or the allocator must include definitions for all fields - * provided in kmem_cache_common in their definition of kmem_cache. - * - * Once we can do anonymous structs (C11 standard) we could put a - * anonymous struct definition in these allocators so that the - * separate allocations in the kmem_cache structure of SLAB and - * SLUB is no longer needed. - */ -#ifdef CONFIG_SLOB -struct kmem_cache { - unsigned int object_size;/* The original size of the object */ - unsigned int size; /* The aligned/padded/added on size */ - unsigned int align; /* Alignment as calculated */ - unsigned long flags; /* Active flags on the slab */ - const char *name; /* Slab name for sysfs */ - int refcount; /* Use counter */ - void (*ctor)(void *); /* Called on object slot creation */ - struct list_head list; /* List of all slab caches on the system */ -}; -#endif struct mem_cgroup; /* @@ -156,6 +133,35 @@ void kfree(const void *); void kzfree(const void *); size_t ksize(const void *); +#ifdef CONFIG_SLOB +/* + * Common fields provided in kmem_cache by all slab allocators + * This struct is either used directly by the allocator (SLOB) + * or the allocator must include definitions for all fields + * provided in kmem_cache_common in their definition of kmem_cache. + * + * Once we can do anonymous structs (C11 standard) we could put a + * anonymous struct definition in these allocators so that the + * separate allocations in the kmem_cache structure of SLAB and + * SLUB is no longer needed. + */ +struct kmem_cache { + unsigned int object_size;/* The original size of the object */ + unsigned int size; /* The aligned/padded/added on size */ + unsigned int align; /* Alignment as calculated */ + unsigned long flags; /* Active flags on the slab */ + const char *name; /* Slab name for sysfs */ + int refcount; /* Use counter */ + void (*ctor)(void *); /* Called on object slot creation */ + struct list_head list; /* List of all slab caches on the system */ +}; + +#define KMALLOC_MAX_SIZE (1UL << 30) + +#include + +#else /* CONFIG_SLOB */ + /* * The largest kmalloc size supported by the slab allocators is * 32 megabyte (2^25) or the maximum allocatable page order if that is @@ -171,6 +177,99 @@ size_t ksize(const void *); #define KMALLOC_MAX_SIZE (1UL << KMALLOC_SHIFT_HIGH) #define KMALLOC_MAX_ORDER (KMALLOC_SHIFT_HIGH - PAGE_SHIFT) +/* + * Kmalloc subsystem. + */ +#if defined(ARCH_DMA_MINALIGN) && ARCH_DMA_MINALIGN > 8 +#define KMALLOC_MIN_SIZE ARCH_DMA_MINALIGN +#else +#ifdef CONFIG_SLAB +#define KMALLOC_MIN_SIZE 32 +#else +#define KMALLOC_MIN_SIZE 8 +#endif +#endif + +#define KMALLOC_SHIFT_LOW ilog2(KMALLOC_MIN_SIZE) + +/* + * Figure out which kmalloc slab an allocation of a certain size + * belongs to. + * 0 = zero alloc + * 1 = 65 .. 96 bytes + * 2 = 120 .. 192 bytes + * n = 2^(n-1) .. 2^n -1 + */ +static __always_inline int kmalloc_index(size_t size) +{ + if (!size) + return 0; + + if (size <= KMALLOC_MIN_SIZE) + return KMALLOC_SHIFT_LOW; + + if (KMALLOC_MIN_SIZE <= 32 && size > 64 && size <= 96) + return 1; + if (KMALLOC_MIN_SIZE <= 64 && size > 128 && size <= 192) + return 2; + if (size <= 8) return 3; + if (size <= 16) return 4; + if (size <= 32) return 5; + if (size <= 64) return 6; + if (size <= 128) return 7; + if (size <= 256) return 8; + if (size <= 512) return 9; + if (size <= 1024) return 10; + if (size <= 2 * 1024) return 11; + if (size <= 4 * 1024) return 12; + if (size <= 8 * 1024) return 13; + if (size <= 16 * 1024) return 14; + if (size <= 32 * 1024) return 15; + if (size <= 64 * 1024) return 16; + if (size <= 128 * 1024) return 17; + if (size <= 256 * 1024) return 18; + if (size <= 512 * 1024) return 19; + if (size <= 1024 * 1024) return 20; + if (size <= 2 * 1024 * 1024) return 21; + if (size <= 4 * 1024 * 1024) return 22; + if (size <= 8 * 1024 * 1024) return 23; + if (size <= 16 * 1024 * 1024) return 24; + if (size <= 32 * 1024 * 1024) return 25; + if (size <= 64 * 1024 * 1024) return 26; + BUG(); + + /* Will never be reached. Needed because the compiler may complain */ + return -1; +} + +#ifdef CONFIG_SLAB +#include +#elif defined(CONFIG_SLUB) +#include +#else +#error "Unknown slab allocator" +#endif + +/* + * Determine size used for the nth kmalloc cache. + * return size or 0 if a kmalloc cache for that + * size does not exist + */ +static __always_inline int kmalloc_size(int n) +{ + if (n > 2) + return 1 << n; + + if (n == 1 && KMALLOC_MIN_SIZE <= 32) + return 96; + + if (n == 2 && KMALLOC_MIN_SIZE <= 64) + return 192; + + return 0; +} +#endif /* !CONFIG_SLOB */ + /* * Some archs want to perform DMA into kmalloc caches and need a guaranteed * alignment larger than the alignment of a 64-bit integer. @@ -233,33 +332,6 @@ struct seq_file; int cache_show(struct kmem_cache *s, struct seq_file *m); void print_slabinfo_header(struct seq_file *m); -/* - * Allocator specific definitions. These are mainly used to establish optimized - * ways to convert kmalloc() calls to kmem_cache_alloc() invocations by - * selecting the appropriate general cache at compile time. - * - * Allocators must define at least: - * - * kmem_cache_alloc() - * __kmalloc() - * kmalloc() - * - * Those wishing to support NUMA must also define: - * - * kmem_cache_alloc_node() - * kmalloc_node() - * - * See each allocator definition file for additional comments and - * implementation notes. - */ -#ifdef CONFIG_SLUB -#include -#elif defined(CONFIG_SLOB) -#include -#else -#include -#endif - /** * kmalloc_array - allocate memory for an array. * @n: number of elements. diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 9db4825cd393..99c3e05ff1f0 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -115,17 +115,6 @@ struct kmem_cache { struct kmem_cache_node *node[MAX_NUMNODES]; }; -/* - * Kmalloc subsystem. - */ -#if defined(ARCH_DMA_MINALIGN) && ARCH_DMA_MINALIGN > 8 -#define KMALLOC_MIN_SIZE ARCH_DMA_MINALIGN -#else -#define KMALLOC_MIN_SIZE 8 -#endif - -#define KMALLOC_SHIFT_LOW ilog2(KMALLOC_MIN_SIZE) - /* * Maximum kmalloc object size handled by SLUB. Larger object allocations * are passed through to the page allocator. The page allocator "fastpath" @@ -152,58 +141,6 @@ struct kmem_cache { */ extern struct kmem_cache *kmalloc_caches[SLUB_PAGE_SHIFT]; -/* - * Sorry that the following has to be that ugly but some versions of GCC - * have trouble with constant propagation and loops. - */ -static __always_inline int kmalloc_index(size_t size) -{ - if (!size) - return 0; - - if (size <= KMALLOC_MIN_SIZE) - return KMALLOC_SHIFT_LOW; - - if (KMALLOC_MIN_SIZE <= 32 && size > 64 && size <= 96) - return 1; - if (KMALLOC_MIN_SIZE <= 64 && size > 128 && size <= 192) - return 2; - if (size <= 8) return 3; - if (size <= 16) return 4; - if (size <= 32) return 5; - if (size <= 64) return 6; - if (size <= 128) return 7; - if (size <= 256) return 8; - if (size <= 512) return 9; - if (size <= 1024) return 10; - if (size <= 2 * 1024) return 11; - if (size <= 4 * 1024) return 12; -/* - * The following is only needed to support architectures with a larger page - * size than 4k. We need to support 2 * PAGE_SIZE here. So for a 64k page - * size we would have to go up to 128k. - */ - if (size <= 8 * 1024) return 13; - if (size <= 16 * 1024) return 14; - if (size <= 32 * 1024) return 15; - if (size <= 64 * 1024) return 16; - if (size <= 128 * 1024) return 17; - if (size <= 256 * 1024) return 18; - if (size <= 512 * 1024) return 19; - if (size <= 1024 * 1024) return 20; - if (size <= 2 * 1024 * 1024) return 21; - BUG(); - return -1; /* Will never be reached */ - -/* - * What we really wanted to do and cannot do because of compiler issues is: - * int i; - * for (i = KMALLOC_SHIFT_LOW; i <= KMALLOC_SHIFT_HIGH; i++) - * if (size <= (1 << i)) - * return i; - */ -} - /* * Find the slab cache for a given combination of allocation flags and size. * -- cgit v1.2.3 From e33660165c901d18e7d3df2290db070d3e4b46df Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 10 Jan 2013 19:14:18 +0000 Subject: slab: Use common kmalloc_index/kmalloc_size functions Make slab use the common functions. We can get rid of a lot of old ugly stuff as a results. Among them the sizes array and the weird include/linux/kmalloc_sizes file and some pretty bad #include statements in slab_def.h. The one thing that is different in slab is that the 32 byte cache will also be created for arches that have page sizes larger than 4K. There are numerous smaller allocations that SLOB and SLUB can handle better because of their support for smaller allocation sizes so lets keep the 32 byte slab also for arches with > 4K pages. Reviewed-by: Glauber Costa Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/kmalloc_sizes.h | 45 ----------------------------------------- include/linux/slab_def.h | 47 +++++++++++-------------------------------- 2 files changed, 12 insertions(+), 80 deletions(-) delete mode 100644 include/linux/kmalloc_sizes.h (limited to 'include/linux') diff --git a/include/linux/kmalloc_sizes.h b/include/linux/kmalloc_sizes.h deleted file mode 100644 index e576b848ce10..000000000000 --- a/include/linux/kmalloc_sizes.h +++ /dev/null @@ -1,45 +0,0 @@ -#if (PAGE_SIZE == 4096) - CACHE(32) -#endif - CACHE(64) -#if L1_CACHE_BYTES < 64 - CACHE(96) -#endif - CACHE(128) -#if L1_CACHE_BYTES < 128 - CACHE(192) -#endif - CACHE(256) - CACHE(512) - CACHE(1024) - CACHE(2048) - CACHE(4096) - CACHE(8192) - CACHE(16384) - CACHE(32768) - CACHE(65536) - CACHE(131072) -#if KMALLOC_MAX_SIZE >= 262144 - CACHE(262144) -#endif -#if KMALLOC_MAX_SIZE >= 524288 - CACHE(524288) -#endif -#if KMALLOC_MAX_SIZE >= 1048576 - CACHE(1048576) -#endif -#if KMALLOC_MAX_SIZE >= 2097152 - CACHE(2097152) -#endif -#if KMALLOC_MAX_SIZE >= 4194304 - CACHE(4194304) -#endif -#if KMALLOC_MAX_SIZE >= 8388608 - CACHE(8388608) -#endif -#if KMALLOC_MAX_SIZE >= 16777216 - CACHE(16777216) -#endif -#if KMALLOC_MAX_SIZE >= 33554432 - CACHE(33554432) -#endif diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h index 8bb6e0eaf3c6..e0f30ef9525d 100644 --- a/include/linux/slab_def.h +++ b/include/linux/slab_def.h @@ -11,8 +11,6 @@ */ #include -#include /* kmalloc_sizes.h needs PAGE_SIZE */ -#include /* kmalloc_sizes.h needs L1_CACHE_BYTES */ #include /* @@ -104,15 +102,8 @@ struct kmem_cache { */ }; -/* Size description struct for general caches. */ -struct cache_sizes { - size_t cs_size; - struct kmem_cache *cs_cachep; -#ifdef CONFIG_ZONE_DMA - struct kmem_cache *cs_dmacachep; -#endif -}; -extern struct cache_sizes malloc_sizes[]; +extern struct kmem_cache *kmalloc_caches[PAGE_SHIFT + MAX_ORDER]; +extern struct kmem_cache *kmalloc_dma_caches[PAGE_SHIFT + MAX_ORDER]; void *kmem_cache_alloc(struct kmem_cache *, gfp_t); void *__kmalloc(size_t size, gfp_t flags); @@ -133,26 +124,19 @@ static __always_inline void *kmalloc(size_t size, gfp_t flags) void *ret; if (__builtin_constant_p(size)) { - int i = 0; + int i; if (!size) return ZERO_SIZE_PTR; -#define CACHE(x) \ - if (size <= x) \ - goto found; \ - else \ - i++; -#include -#undef CACHE - return NULL; -found: + i = kmalloc_index(size); + #ifdef CONFIG_ZONE_DMA if (flags & GFP_DMA) - cachep = malloc_sizes[i].cs_dmacachep; + cachep = kmalloc_dma_caches[i]; else #endif - cachep = malloc_sizes[i].cs_cachep; + cachep = kmalloc_caches[i]; ret = kmem_cache_alloc_trace(cachep, flags, size); @@ -186,26 +170,19 @@ static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node) struct kmem_cache *cachep; if (__builtin_constant_p(size)) { - int i = 0; + int i; if (!size) return ZERO_SIZE_PTR; -#define CACHE(x) \ - if (size <= x) \ - goto found; \ - else \ - i++; -#include -#undef CACHE - return NULL; -found: + i = kmalloc_index(size); + #ifdef CONFIG_ZONE_DMA if (flags & GFP_DMA) - cachep = malloc_sizes[i].cs_dmacachep; + cachep = kmalloc_dma_caches[i]; else #endif - cachep = malloc_sizes[i].cs_cachep; + cachep = kmalloc_caches[i]; return kmem_cache_alloc_node_trace(cachep, flags, node, size); } -- cgit v1.2.3 From 6744f087ba2a49f6d6935d9daa0b20a0f03567b5 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 10 Jan 2013 19:12:17 +0000 Subject: slab: Common name for the per node structures Rename the structure used for the per node structures in slab to have a name that expresses that fact. Acked-by: Glauber Costa Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slab_def.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h index e0f30ef9525d..8b5b2f6b36d3 100644 --- a/include/linux/slab_def.h +++ b/include/linux/slab_def.h @@ -95,7 +95,7 @@ struct kmem_cache { * pointer for each node since "nodelists" uses the remainder of * available pointers. */ - struct kmem_list3 **nodelists; + struct kmem_cache_node **nodelists; struct array_cache *array[NR_CPUS + MAX_NUMNODES]; /* * Do not add fields after array[] -- cgit v1.2.3 From 6a67368c36e2c0c2578ba62f6264ab739af08cce Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 10 Jan 2013 19:14:19 +0000 Subject: slab: Rename nodelists to node Have a common naming between both slab caches for future changes. Acked-by: Glauber Costa Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slab_def.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h index 8b5b2f6b36d3..4ff50e8d1a2c 100644 --- a/include/linux/slab_def.h +++ b/include/linux/slab_def.h @@ -95,7 +95,7 @@ struct kmem_cache { * pointer for each node since "nodelists" uses the remainder of * available pointers. */ - struct kmem_cache_node **nodelists; + struct kmem_cache_node **node; struct array_cache *array[NR_CPUS + MAX_NUMNODES]; /* * Do not add fields after array[] -- cgit v1.2.3 From 95a05b428cc675694321c8f762591984f3fd2b1e Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 10 Jan 2013 19:14:19 +0000 Subject: slab: Common constants for kmalloc boundaries Standardize the constants that describe the smallest and largest object kept in the kmalloc arrays for SLAB and SLUB. Differentiate between the maximum size for which a slab cache is used (KMALLOC_MAX_CACHE_SIZE) and the maximum allocatable size (KMALLOC_MAX_SIZE, KMALLOC_MAX_ORDER). Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slab.h | 34 ++++++++++++++++++++++++---------- include/linux/slub_def.h | 19 +++---------------- 2 files changed, 27 insertions(+), 26 deletions(-) (limited to 'include/linux') diff --git a/include/linux/slab.h b/include/linux/slab.h index c97fe92532d1..c01780540054 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -163,7 +163,12 @@ struct kmem_cache { #else /* CONFIG_SLOB */ /* - * The largest kmalloc size supported by the slab allocators is + * Kmalloc array related definitions + */ + +#ifdef CONFIG_SLAB +/* + * The largest kmalloc size supported by the SLAB allocators is * 32 megabyte (2^25) or the maximum allocatable page order if that is * less than 32 MB. * @@ -173,9 +178,24 @@ struct kmem_cache { */ #define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \ (MAX_ORDER + PAGE_SHIFT - 1) : 25) +#define KMALLOC_SHIFT_MAX KMALLOC_SHIFT_HIGH +#define KMALLOC_SHIFT_LOW 5 +#else +/* + * SLUB allocates up to order 2 pages directly and otherwise + * passes the request to the page allocator. + */ +#define KMALLOC_SHIFT_HIGH (PAGE_SHIFT + 1) +#define KMALLOC_SHIFT_MAX (MAX_ORDER + PAGE_SHIFT) +#define KMALLOC_SHIFT_LOW 3 +#endif -#define KMALLOC_MAX_SIZE (1UL << KMALLOC_SHIFT_HIGH) -#define KMALLOC_MAX_ORDER (KMALLOC_SHIFT_HIGH - PAGE_SHIFT) +/* Maximum allocatable size */ +#define KMALLOC_MAX_SIZE (1UL << KMALLOC_SHIFT_MAX) +/* Maximum size for which we actually use a slab cache */ +#define KMALLOC_MAX_CACHE_SIZE (1UL << KMALLOC_SHIFT_HIGH) +/* Maximum order allocatable via the slab allocagtor */ +#define KMALLOC_MAX_ORDER (KMALLOC_SHIFT_MAX - PAGE_SHIFT) /* * Kmalloc subsystem. @@ -183,15 +203,9 @@ struct kmem_cache { #if defined(ARCH_DMA_MINALIGN) && ARCH_DMA_MINALIGN > 8 #define KMALLOC_MIN_SIZE ARCH_DMA_MINALIGN #else -#ifdef CONFIG_SLAB -#define KMALLOC_MIN_SIZE 32 -#else -#define KMALLOC_MIN_SIZE 8 -#endif +#define KMALLOC_MIN_SIZE (1 << KMALLOC_SHIFT_LOW) #endif -#define KMALLOC_SHIFT_LOW ilog2(KMALLOC_MIN_SIZE) - /* * Figure out which kmalloc slab an allocation of a certain size * belongs to. diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 99c3e05ff1f0..032028ef9a34 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -115,19 +115,6 @@ struct kmem_cache { struct kmem_cache_node *node[MAX_NUMNODES]; }; -/* - * Maximum kmalloc object size handled by SLUB. Larger object allocations - * are passed through to the page allocator. The page allocator "fastpath" - * is relatively slow so we need this value sufficiently high so that - * performance critical objects are allocated through the SLUB fastpath. - * - * This should be dropped to PAGE_SIZE / 2 once the page allocator - * "fastpath" becomes competitive with the slab allocator fastpaths. - */ -#define SLUB_MAX_SIZE (2 * PAGE_SIZE) - -#define SLUB_PAGE_SHIFT (PAGE_SHIFT + 2) - #ifdef CONFIG_ZONE_DMA #define SLUB_DMA __GFP_DMA #else @@ -139,7 +126,7 @@ struct kmem_cache { * We keep the general caches in an array of slab caches that are used for * 2^x bytes of allocations. */ -extern struct kmem_cache *kmalloc_caches[SLUB_PAGE_SHIFT]; +extern struct kmem_cache *kmalloc_caches[KMALLOC_SHIFT_HIGH + 1]; /* * Find the slab cache for a given combination of allocation flags and size. @@ -211,7 +198,7 @@ static __always_inline void *kmalloc_large(size_t size, gfp_t flags) static __always_inline void *kmalloc(size_t size, gfp_t flags) { if (__builtin_constant_p(size)) { - if (size > SLUB_MAX_SIZE) + if (size > KMALLOC_MAX_CACHE_SIZE) return kmalloc_large(size, flags); if (!(flags & SLUB_DMA)) { @@ -247,7 +234,7 @@ kmem_cache_alloc_node_trace(struct kmem_cache *s, static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node) { if (__builtin_constant_p(size) && - size <= SLUB_MAX_SIZE && !(flags & SLUB_DMA)) { + size <= KMALLOC_MAX_CACHE_SIZE && !(flags & SLUB_DMA)) { struct kmem_cache *s = kmalloc_slab(size); if (!s) -- cgit v1.2.3 From 9425c58e5445277699ff3c2a87bac1cfebc1b48d Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 10 Jan 2013 19:12:17 +0000 Subject: slab: Common definition for the array of kmalloc caches Have a common definition fo the kmalloc cache arrays in SLAB and SLUB Acked-by: Glauber Costa Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slab.h | 5 +++++ include/linux/slab_def.h | 3 --- include/linux/slub_def.h | 6 ------ 3 files changed, 5 insertions(+), 9 deletions(-) (limited to 'include/linux') diff --git a/include/linux/slab.h b/include/linux/slab.h index c01780540054..f2327a898a85 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -206,6 +206,11 @@ struct kmem_cache { #define KMALLOC_MIN_SIZE (1 << KMALLOC_SHIFT_LOW) #endif +extern struct kmem_cache *kmalloc_caches[KMALLOC_SHIFT_HIGH + 1]; +#ifdef CONFIG_ZONE_DMA +extern struct kmem_cache *kmalloc_dma_caches[KMALLOC_SHIFT_HIGH + 1]; +#endif + /* * Figure out which kmalloc slab an allocation of a certain size * belongs to. diff --git a/include/linux/slab_def.h b/include/linux/slab_def.h index 4ff50e8d1a2c..113ec080313f 100644 --- a/include/linux/slab_def.h +++ b/include/linux/slab_def.h @@ -102,9 +102,6 @@ struct kmem_cache { */ }; -extern struct kmem_cache *kmalloc_caches[PAGE_SHIFT + MAX_ORDER]; -extern struct kmem_cache *kmalloc_dma_caches[PAGE_SHIFT + MAX_ORDER]; - void *kmem_cache_alloc(struct kmem_cache *, gfp_t); void *__kmalloc(size_t size, gfp_t flags); diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 032028ef9a34..3701896f7f8a 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -122,12 +122,6 @@ struct kmem_cache { #define SLUB_DMA (__force gfp_t)0 #endif -/* - * We keep the general caches in an array of slab caches that are used for - * 2^x bytes of allocations. - */ -extern struct kmem_cache *kmalloc_caches[KMALLOC_SHIFT_HIGH + 1]; - /* * Find the slab cache for a given combination of allocation flags and size. * -- cgit v1.2.3 From 2c59dd6544212faa5ce761920d2251f4152f408d Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 10 Jan 2013 19:14:19 +0000 Subject: slab: Common Kmalloc cache determination Extract the optimized lookup functions from slub and put them into slab_common.c. Then make slab use these functions as well. Joonsoo notes that this fixes some issues with constant folding which also reduces the code size for slub. https://lkml.org/lkml/2012/10/20/82 Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slub_def.h | 41 ++++++++++------------------------------- 1 file changed, 10 insertions(+), 31 deletions(-) (limited to 'include/linux') diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 3701896f7f8a..16341e5316de 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -115,29 +115,6 @@ struct kmem_cache { struct kmem_cache_node *node[MAX_NUMNODES]; }; -#ifdef CONFIG_ZONE_DMA -#define SLUB_DMA __GFP_DMA -#else -/* Disable DMA functionality */ -#define SLUB_DMA (__force gfp_t)0 -#endif - -/* - * Find the slab cache for a given combination of allocation flags and size. - * - * This ought to end up with a global pointer to the right cache - * in kmalloc_caches. - */ -static __always_inline struct kmem_cache *kmalloc_slab(size_t size) -{ - int index = kmalloc_index(size); - - if (index == 0) - return NULL; - - return kmalloc_caches[index]; -} - void *kmem_cache_alloc(struct kmem_cache *, gfp_t); void *__kmalloc(size_t size, gfp_t flags); @@ -195,13 +172,14 @@ static __always_inline void *kmalloc(size_t size, gfp_t flags) if (size > KMALLOC_MAX_CACHE_SIZE) return kmalloc_large(size, flags); - if (!(flags & SLUB_DMA)) { - struct kmem_cache *s = kmalloc_slab(size); + if (!(flags & GFP_DMA)) { + int index = kmalloc_index(size); - if (!s) + if (!index) return ZERO_SIZE_PTR; - return kmem_cache_alloc_trace(s, flags, size); + return kmem_cache_alloc_trace(kmalloc_caches[index], + flags, size); } } return __kmalloc(size, flags); @@ -228,13 +206,14 @@ kmem_cache_alloc_node_trace(struct kmem_cache *s, static __always_inline void *kmalloc_node(size_t size, gfp_t flags, int node) { if (__builtin_constant_p(size) && - size <= KMALLOC_MAX_CACHE_SIZE && !(flags & SLUB_DMA)) { - struct kmem_cache *s = kmalloc_slab(size); + size <= KMALLOC_MAX_CACHE_SIZE && !(flags & GFP_DMA)) { + int index = kmalloc_index(size); - if (!s) + if (!index) return ZERO_SIZE_PTR; - return kmem_cache_alloc_node_trace(s, flags, node, size); + return kmem_cache_alloc_node_trace(kmalloc_caches[index], + flags, node, size); } return __kmalloc_node(size, flags, node); } -- cgit v1.2.3 From ca34956b804b7554fc4e88826773380d9d5122a8 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 10 Jan 2013 19:14:19 +0000 Subject: slab: Common definition for kmem_cache_node Put the definitions for the kmem_cache_node structures together so that we have one structure. That will allow us to create more common fields in the future which could yield more opportunities to share code. Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slub_def.h | 11 ----------- 1 file changed, 11 deletions(-) (limited to 'include/linux') diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 16341e5316de..027276fa8713 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -53,17 +53,6 @@ struct kmem_cache_cpu { #endif }; -struct kmem_cache_node { - spinlock_t list_lock; /* Protect partial list and nr_partial */ - unsigned long nr_partial; - struct list_head partial; -#ifdef CONFIG_SLUB_DEBUG - atomic_long_t nr_slabs; - atomic_long_t total_objects; - struct list_head full; -#endif -}; - /* * Word size structure that can be atomically updated or read and that * contains both the order and the number of objects that a slab of the -- cgit v1.2.3 From c601fd6956e92b0eb268d4af754073c76155b99d Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Tue, 5 Feb 2013 16:36:47 +0000 Subject: slab: Handle ARCH_DMA_MINALIGN correctly James Hogan hit boot problems in next-20130204 on Meta: META213-Thread0 DSP [LogF] kobject (4fc03980): tried to init an initialized object, something is seriously wrong. META213-Thread0 DSP [LogF] META213-Thread0 DSP [LogF] Call trace: META213-Thread0 DSP [LogF] [<4000888c>] _show_stack+0x68/0x7c META213-Thread0 DSP [LogF] [<400088b4>] _dump_stack+0x14/0x28 META213-Thread0 DSP [LogF] [<40103794>] _kobject_init+0x58/0x9c META213-Thread0 DSP [LogF] [<40103810>] _kobject_create+0x38/0x64 META213-Thread0 DSP [LogF] [<40103eac>] _kobject_create_and_add+0x14/0x8c META213-Thread0 DSP [LogF] [<40190ac4>] _mnt_init+0xd8/0x220 META213-Thread0 DSP [LogF] [<40190508>] _vfs_caches_init+0xb0/0x160 META213-Thread0 DSP [LogF] [<401851f4>] _start_kernel+0x274/0x340 META213-Thread0 DSP [LogF] [<40188424>] _metag_start_kernel+0x58/0x6c META213-Thread0 DSP [LogF] [<40000044>] __start+0x44/0x48 META213-Thread0 DSP [LogF] META213-Thread0 DSP [LogF] devtmpfs: initialized META213-Thread0 DSP [LogF] L2 Cache: Not present META213-Thread0 DSP [LogF] BUG: failure at fs/sysfs/dir.c:736/sysfs_read_ns_type()! META213-Thread0 DSP [LogF] Kernel panic - not syncing: BUG! META213-Thread0 DSP [Thread Exit] Thread has exited - return code = 4294967295 And bisected the problem to commit 95a05b4 ("slab: Common constants for kmalloc boundaries"). As it turns out, a fixed KMALLOC_SHIFT_LOW does not work for arches with higher alignment requirements. Determine KMALLOC_SHIFT_LOW from ARCH_DMA_MINALIGN instead. Reported-and-tested-by: James Hogan Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg --- include/linux/slab.h | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/slab.h b/include/linux/slab.h index f2327a898a85..0c621752caa6 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -133,6 +133,19 @@ void kfree(const void *); void kzfree(const void *); size_t ksize(const void *); +/* + * Some archs want to perform DMA into kmalloc caches and need a guaranteed + * alignment larger than the alignment of a 64-bit integer. + * Setting ARCH_KMALLOC_MINALIGN in arch headers allows that. + */ +#if defined(ARCH_DMA_MINALIGN) && ARCH_DMA_MINALIGN > 8 +#define ARCH_KMALLOC_MINALIGN ARCH_DMA_MINALIGN +#define KMALLOC_MIN_SIZE ARCH_DMA_MINALIGN +#define KMALLOC_SHIFT_LOW ilog2(ARCH_DMA_MINALIGN) +#else +#define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long) +#endif + #ifdef CONFIG_SLOB /* * Common fields provided in kmem_cache by all slab allocators @@ -179,7 +192,9 @@ struct kmem_cache { #define KMALLOC_SHIFT_HIGH ((MAX_ORDER + PAGE_SHIFT - 1) <= 25 ? \ (MAX_ORDER + PAGE_SHIFT - 1) : 25) #define KMALLOC_SHIFT_MAX KMALLOC_SHIFT_HIGH +#ifndef KMALLOC_SHIFT_LOW #define KMALLOC_SHIFT_LOW 5 +#endif #else /* * SLUB allocates up to order 2 pages directly and otherwise @@ -187,8 +202,10 @@ struct kmem_cache { */ #define KMALLOC_SHIFT_HIGH (PAGE_SHIFT + 1) #define KMALLOC_SHIFT_MAX (MAX_ORDER + PAGE_SHIFT) +#ifndef KMALLOC_SHIFT_LOW #define KMALLOC_SHIFT_LOW 3 #endif +#endif /* Maximum allocatable size */ #define KMALLOC_MAX_SIZE (1UL << KMALLOC_SHIFT_MAX) @@ -200,9 +217,7 @@ struct kmem_cache { /* * Kmalloc subsystem. */ -#if defined(ARCH_DMA_MINALIGN) && ARCH_DMA_MINALIGN > 8 -#define KMALLOC_MIN_SIZE ARCH_DMA_MINALIGN -#else +#ifndef KMALLOC_MIN_SIZE #define KMALLOC_MIN_SIZE (1 << KMALLOC_SHIFT_LOW) #endif @@ -289,17 +304,6 @@ static __always_inline int kmalloc_size(int n) } #endif /* !CONFIG_SLOB */ -/* - * Some archs want to perform DMA into kmalloc caches and need a guaranteed - * alignment larger than the alignment of a 64-bit integer. - * Setting ARCH_KMALLOC_MINALIGN in arch headers allows that. - */ -#ifdef ARCH_DMA_MINALIGN -#define ARCH_KMALLOC_MINALIGN ARCH_DMA_MINALIGN -#else -#define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long) -#endif - /* * Setting ARCH_SLAB_MINALIGN in arch headers allows a different alignment. * Intended for arches that get misalignment faults even for 64 bit integer -- cgit v1.2.3 From f43f627d2f17e95c78647eeddf968d12f5c286b1 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 4 Feb 2013 13:37:20 +0000 Subject: PM: make VT switching to the suspend console optional v3 KMS drivers can potentially restore the display configuration without userspace help. Such drivers can can call a new funciton, pm_vt_switch_required(false) if they support this feature. In that case, the PM layer won't VT switch to the suspend console at suspend time and then back to the original VT on resume, but rather leave things alone for a nicer looking suspend and resume sequence. v2: make a function so we can handle multiple drivers (Alan) v3: use a list to track device requests (Rafael) v4: Squash in build fix from Jesse for CONFIG_VT_CONSOLE_SLEEP=n v5: Squash in patch from Wu Fengguang to add a few missing static qualifiers. v6: Add missing EXPORT_SYMBOL. Signed-off-by: Jesse Barnes Reviewed-by: Rafael J. Wysocki (v3) Signed-off-by: Daniel Vetter --- include/linux/pm.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pm.h b/include/linux/pm.h index 03d7bb145311..e5da2f353e8f 100644 --- a/include/linux/pm.h +++ b/include/linux/pm.h @@ -35,6 +35,19 @@ extern void (*pm_idle)(void); extern void (*pm_power_off)(void); extern void (*pm_power_off_prepare)(void); +struct device; /* we have a circular dep with device.h */ +#ifdef CONFIG_VT_CONSOLE_SLEEP +extern void pm_vt_switch_required(struct device *dev, bool required); +extern void pm_vt_switch_unregister(struct device *dev); +#else +static inline void pm_vt_switch_required(struct device *dev, bool required) +{ +} +static inline void pm_vt_switch_unregister(struct device *dev) +{ +} +#endif /* CONFIG_VT_CONSOLE_SLEEP */ + /* * Device power management */ -- cgit v1.2.3 From 3cf2667b9f8b2c2fe298a427deb399e52321da6b Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 4 Feb 2013 13:37:21 +0000 Subject: fb: add support for drivers not needing VT switch at suspend/resume time Use the new PM routines to indicate whether we need to VT switch at suspend and resume time. When a new driver is bound, set its flag accordingly, and when unbound, remove it from the PM's console tracking list. Signed-off-by: Jesse Barnes Acked-by: Rafael J. Wysocki Signed-off-by: Daniel Vetter --- include/linux/fb.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fb.h b/include/linux/fb.h index 58b98606ac26..d49c60f5aa4c 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -501,6 +501,8 @@ struct fb_info { resource_size_t size; } ranges[0]; } *apertures; + + bool skip_vt_switch; /* no VT switch on suspend/resume required */ }; static inline struct apertures_struct *alloc_apertures(unsigned int max_num) { -- cgit v1.2.3 From 4490108b4a5ada14c7be712260829faecc814ae5 Mon Sep 17 00:00:00 2001 From: Ben Pfaff Date: Fri, 15 Feb 2013 17:29:22 -0800 Subject: openvswitch: Allow OVS_USERSPACE_ATTR_USERDATA to be variable length. Until now, the optional OVS_USERSPACE_ATTR_USERDATA attribute had to be exactly 64 bits long, if it was present. However, 64 bits is not enough space to associate as much information with a flow as would be convenient for some userspace features now under development. This commit generalizes the attribute, allowing it to be any length. This generalization is backward-compatible: if userspace only uses 64-bit attributes, then it will not see any change in behavior. CC: Romain Lenglet Signed-off-by: Ben Pfaff Signed-off-by: Jesse Gross --- include/linux/openvswitch.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/openvswitch.h b/include/linux/openvswitch.h index 99e6414a40d9..67d6c7b03581 100644 --- a/include/linux/openvswitch.h +++ b/include/linux/openvswitch.h @@ -127,7 +127,8 @@ enum ovs_packet_cmd { * for %OVS_PACKET_CMD_EXECUTE. It has nested %OVS_ACTION_ATTR_* attributes. * @OVS_PACKET_ATTR_USERDATA: Present for an %OVS_PACKET_CMD_ACTION * notification if the %OVS_ACTION_ATTR_USERSPACE action specified an - * %OVS_USERSPACE_ATTR_USERDATA attribute. + * %OVS_USERSPACE_ATTR_USERDATA attribute, with the same length and content + * specified there. * * These attributes follow the &struct ovs_header within the Generic Netlink * payload for %OVS_PACKET_* commands. @@ -137,7 +138,7 @@ enum ovs_packet_attr { OVS_PACKET_ATTR_PACKET, /* Packet data. */ OVS_PACKET_ATTR_KEY, /* Nested OVS_KEY_ATTR_* attributes. */ OVS_PACKET_ATTR_ACTIONS, /* Nested OVS_ACTION_ATTR_* attributes. */ - OVS_PACKET_ATTR_USERDATA, /* u64 OVS_ACTION_ATTR_USERSPACE arg. */ + OVS_PACKET_ATTR_USERDATA, /* OVS_ACTION_ATTR_USERSPACE arg. */ __OVS_PACKET_ATTR_MAX }; @@ -389,13 +390,13 @@ enum ovs_sample_attr { * enum ovs_userspace_attr - Attributes for %OVS_ACTION_ATTR_USERSPACE action. * @OVS_USERSPACE_ATTR_PID: u32 Netlink PID to which the %OVS_PACKET_CMD_ACTION * message should be sent. Required. - * @OVS_USERSPACE_ATTR_USERDATA: If present, its u64 argument is copied to the - * %OVS_PACKET_CMD_ACTION message as %OVS_PACKET_ATTR_USERDATA, + * @OVS_USERSPACE_ATTR_USERDATA: If present, its variable-length argument is + * copied to the %OVS_PACKET_CMD_ACTION message as %OVS_PACKET_ATTR_USERDATA. */ enum ovs_userspace_attr { OVS_USERSPACE_ATTR_UNSPEC, OVS_USERSPACE_ATTR_PID, /* u32 Netlink PID to receive upcalls. */ - OVS_USERSPACE_ATTR_USERDATA, /* u64 optional user-specified cookie. */ + OVS_USERSPACE_ATTR_USERDATA, /* Optional user-specified cookie. */ __OVS_USERSPACE_ATTR_MAX }; -- cgit v1.2.3 From e90a6df80dc45ab53d2f4f4db297434e48c0208e Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Mon, 25 Feb 2013 11:31:43 +0100 Subject: HID: Extend the interface with report requests Some drivers send reports directly to underlying device, creating an unwanted dependency on the underlying transport layer. This patch adds hid_hw_request() to the interface, thereby removing usbhid from the lion share of the drivers. Signed-off-by: Henrik Rydberg Signed-off-by: Benjamin Tissoires Reviewed-by: Mika Westerberg Signed-off-by: Jiri Kosina --- include/linux/hid.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hid.h b/include/linux/hid.h index e14b465b1146..261c713d4842 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -662,6 +662,7 @@ struct hid_driver { * @hidinput_input_event: event input event (e.g. ff or leds) * @parse: this method is called only once to parse the device data, * shouldn't allocate anything to not leak memory + * @request: send report request to device (e.g. feature report) */ struct hid_ll_driver { int (*start)(struct hid_device *hdev); @@ -676,6 +677,10 @@ struct hid_ll_driver { unsigned int code, int value); int (*parse)(struct hid_device *hdev); + + void (*request)(struct hid_device *hdev, + struct hid_report *report, int reqtype); + }; #define PM_HINT_FULLON 1<<5 @@ -883,6 +888,21 @@ static inline int hid_hw_power(struct hid_device *hdev, int level) return hdev->ll_driver->power ? hdev->ll_driver->power(hdev, level) : 0; } + +/** + * hid_hw_request - send report request to device + * + * @hdev: hid device + * @report: report to send + * @reqtype: hid request type + */ +static inline void hid_hw_request(struct hid_device *hdev, + struct hid_report *report, int reqtype) +{ + if (hdev->ll_driver->request) + hdev->ll_driver->request(hdev, report, reqtype); +} + int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size, int interrupt); -- cgit v1.2.3 From 3373443befa73ee60e4275e7699b26058b01455a Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Mon, 25 Feb 2013 11:31:44 +0100 Subject: HID: Extend the interface with wait io request Some drivers need to wait for an io from the underlying device, creating an unwanted dependency on the underlying transport layer. This patch adds wait() to the interface, thereby removing usbhid from the lion share of the drivers. Signed-off-by: Henrik Rydberg Signed-off-by: Benjamin Tissoires Reviewed-by: Mika Westerberg Signed-off-by: Jiri Kosina --- include/linux/hid.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/hid.h b/include/linux/hid.h index 261c713d4842..7071eb3d36c7 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -663,6 +663,7 @@ struct hid_driver { * @parse: this method is called only once to parse the device data, * shouldn't allocate anything to not leak memory * @request: send report request to device (e.g. feature report) + * @wait: wait for buffered io to complete (send/recv reports) */ struct hid_ll_driver { int (*start)(struct hid_device *hdev); @@ -681,6 +682,8 @@ struct hid_ll_driver { void (*request)(struct hid_device *hdev, struct hid_report *report, int reqtype); + int (*wait)(struct hid_device *hdev); + }; #define PM_HINT_FULLON 1<<5 @@ -903,6 +906,17 @@ static inline void hid_hw_request(struct hid_device *hdev, hdev->ll_driver->request(hdev, report, reqtype); } +/** + * hid_hw_wait - wait for buffered io to complete + * + * @hdev: hid device + */ +static inline void hid_hw_wait(struct hid_device *hdev) +{ + if (hdev->ll_driver->wait) + hdev->ll_driver->wait(hdev); +} + int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, int size, int interrupt); -- cgit v1.2.3 From c849a6143bec520aff2a6646518b0d041402428b Mon Sep 17 00:00:00 2001 From: Andrew de los Reyes Date: Mon, 18 Feb 2013 09:20:21 -0800 Subject: HID: Separate struct hid_device's driver_lock into two locks. This patch separates struct hid_device's driver_lock into two. The goal is to allow hid device drivers to receive input during their probe() or remove() function calls. This is necessary because some drivers need to communicate with the device to determine parameters needed during probe (e.g., size of a multi-touch surface), and if possible, may perfer to communicate with a device on host-initiated disconnect (e.g., to put it into a low-power state). Historically, three functions used driver_lock: - hid_device_probe: blocks to acquire lock - hid_device_remove: blocks to acquire lock - hid_input_report: if locked returns -EBUSY, else acquires lock This patch adds another lock (driver_input_lock) which is used to block input from occurring. The lock behavior is now: - hid_device_probe: blocks to acq. driver_lock, then driver_input_lock - hid_device_remove: blocks to acq. driver_lock, then driver_input_lock - hid_input_report: if driver_input_lock locked returns -EBUSY, else acquires driver_input_lock This patch also adds two helper functions to be called during probe() or remove(): hid_device_io_start() and hid_device_io_stop(). These functions lock and unlock, respectively, driver_input_lock; they also make a note of whether they did so that hid-core knows if a driver has changed the lock state. This patch results in no behavior change for existing devices and drivers. However, during a probe() or remove() function call in a driver, that driver may now selectively call hid_device_io_start() to let input events come through, then optionally call hid_device_io_stop() to stop them. Signed-off-by: Andrew de los Reyes Signed-off-by: Jiri Kosina --- include/linux/hid.h | 46 +++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 45 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/hid.h b/include/linux/hid.h index e14b465b1146..895b85639dec 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -456,7 +456,8 @@ struct hid_device { /* device report descriptor */ unsigned country; /* HID country */ struct hid_report_enum report_enum[HID_REPORT_TYPES]; - struct semaphore driver_lock; /* protects the current driver */ + struct semaphore driver_lock; /* protects the current driver, except during input */ + struct semaphore driver_input_lock; /* protects the current driver */ struct device dev; /* device */ struct hid_driver *driver; struct hid_ll_driver *ll_driver; @@ -477,6 +478,7 @@ struct hid_device { /* device report descriptor */ unsigned int status; /* see STAT flags above */ unsigned claimed; /* Claimed by hidinput, hiddev? */ unsigned quirks; /* Various quirks the device can pull on us */ + bool io_started; /* Protected by driver_lock. If IO has started */ struct list_head inputs; /* The list of inputs */ void *hiddev; /* The hiddev structure */ @@ -599,6 +601,10 @@ struct hid_usage_id { * @resume: invoked on resume if device was not reset (NULL means nop) * @reset_resume: invoked on resume if device was reset (NULL means nop) * + * probe should return -errno on error, or 0 on success. During probe, + * input will not be passed to raw_event unless hid_device_io_start is + * called. + * * raw_event and event should return 0 on no action performed, 1 when no * further processing should be done and negative on error * @@ -737,6 +743,44 @@ const struct hid_device_id *hid_match_id(struct hid_device *hdev, const struct hid_device_id *id); s32 hid_snto32(__u32 value, unsigned n); +/** + * hid_device_io_start - enable HID input during probe, remove + * + * @hid - the device + * + * This should only be called during probe or remove and only be + * called by the thread calling probe or remove. It will allow + * incoming packets to be delivered to the driver. + */ +static inline void hid_device_io_start(struct hid_device *hid) { + if (hid->io_started) { + dev_warn(&hid->dev, "io already started"); + return; + } + hid->io_started = true; + up(&hid->driver_input_lock); +} + +/** + * hid_device_io_stop - disable HID input during probe, remove + * + * @hid - the device + * + * Should only be called after hid_device_io_start. It will prevent + * incoming packets from going to the driver for the duration of + * probe, remove. If called during probe, packets will still go to the + * driver after probe is complete. This function should only be called + * by the thread calling probe or remove. + */ +static inline void hid_device_io_stop(struct hid_device *hid) { + if (!hid->io_started) { + dev_warn(&hid->dev, "io already stopped"); + return; + } + hid->io_started = false; + down(&hid->driver_input_lock); +} + /** * hid_map_usage - map usage input bits * -- cgit v1.2.3 From c8801a8e715d7793e1e7bcd2f6fe132234741753 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 19 Mar 2012 16:35:48 +0000 Subject: regulator: core: Mark all get and enable calls as __must_check It's generally important that devices have power when they expect it so drivers really ought to be checking for errors on the power up paths. Signed-off-by: Mark Brown --- include/linux/regulator/consumer.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 7bc732ce6e50..145022a83085 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -141,18 +141,18 @@ void regulator_put(struct regulator *regulator); void devm_regulator_put(struct regulator *regulator); /* regulator output control and status */ -int regulator_enable(struct regulator *regulator); +int __must_check regulator_enable(struct regulator *regulator); int regulator_disable(struct regulator *regulator); int regulator_force_disable(struct regulator *regulator); int regulator_is_enabled(struct regulator *regulator); int regulator_disable_deferred(struct regulator *regulator, int ms); -int regulator_bulk_get(struct device *dev, int num_consumers, - struct regulator_bulk_data *consumers); -int devm_regulator_bulk_get(struct device *dev, int num_consumers, - struct regulator_bulk_data *consumers); -int regulator_bulk_enable(int num_consumers, - struct regulator_bulk_data *consumers); +int __must_check regulator_bulk_get(struct device *dev, int num_consumers, + struct regulator_bulk_data *consumers); +int __must_check devm_regulator_bulk_get(struct device *dev, int num_consumers, + struct regulator_bulk_data *consumers); +int __must_check regulator_bulk_enable(int num_consumers, + struct regulator_bulk_data *consumers); int regulator_bulk_disable(int num_consumers, struct regulator_bulk_data *consumers); int regulator_bulk_force_disable(int num_consumers, -- cgit v1.2.3 From f19b00da8ed37db4e3891fe534fcf3a605a0e562 Mon Sep 17 00:00:00 2001 From: "Kim, Milo" Date: Mon, 18 Feb 2013 06:50:39 +0000 Subject: regulator: core: support shared enable GPIO concept A Regulator can be enabled by external GPIO pin. This is configurable in the regulator_config. At this moment, the GPIO can be owned by only one regulator device. In some devices, multiple regulators are enabled by shared one GPIO pin. This patch extends this limitation, enabling shared enable GPIO of regulators. New list for enable GPIO: 'regulator_ena_gpio_list' This manages enable GPIO list. New structure for supporting shared enable GPIO: 'regulator_enable_gpio' The enable count is used for balancing GPIO control count. This count is incremented when GPIO is enabled. On the other hand, it's decremented when GPIO is disabled. Reference count: 'request_count' The reference count, 'request_count' is incremented/decremented on requesting/freeing the GPIO. This count makes sure only free the GPIO when it has no users. How it works If the GPIO is already used, skip requesting new GPIO usage. The GPIO is new one, request GPIO function and add it to the list of enable GPIO. This list is used for balancing enable GPIO count and pin control. Updating a GPIO and invert code moved 'ena_gpio' and 'ena_gpio_invert' of the regulator_config were moved to new function, regulator_ena_gpio_request(). Use regulator_enable_pin structure rather than regulator_dev. Signed-off-by: Milo(Woogyom) Kim Reviewed-by: Axel Lin Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 23070fd83872..a467d11dd67d 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -22,6 +22,7 @@ struct regmap; struct regulator_dev; struct regulator_init_data; +struct regulator_enable_gpio; enum regulator_status { REGULATOR_STATUS_OFF, @@ -300,6 +301,7 @@ struct regulator_dev { struct dentry *debugfs; + struct regulator_enable_gpio *ena_pin; int ena_gpio; unsigned int ena_gpio_invert:1; unsigned int ena_gpio_state:1; -- cgit v1.2.3 From 7b74d149247c8972da1cec3e4c70b67049aaeb69 Mon Sep 17 00:00:00 2001 From: "Kim, Milo" Date: Mon, 18 Feb 2013 06:50:55 +0000 Subject: regulator: core: use regulator_ena_pin member The regulator_dev has regulator_enable_gpio structure. 'ena_gpio' and 'ena_gpio_invert' were moved to in regulator_enable_gpio. regulator_dev ---> regulator_enable_gpio .ena_gpio .gpio .ena_gpio_invert .ena_gpio_invert Pointer, 'ena_pin' is used for checking valid enable GPIO pin. Signed-off-by: Milo(Woogyom) Kim Reviewed-by: Axel Lin Signed-off-by: Mark Brown --- include/linux/regulator/driver.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index a467d11dd67d..7b7aeec04f86 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -302,8 +302,6 @@ struct regulator_dev { struct dentry *debugfs; struct regulator_enable_gpio *ena_pin; - int ena_gpio; - unsigned int ena_gpio_invert:1; unsigned int ena_gpio_state:1; }; -- cgit v1.2.3 From 07fe6e00f6cca6fef85a14a1dc3ed4f2e35d3f0b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 21 Jan 2013 15:03:44 -0500 Subject: get rid of duplicate logics in __SC_....[1-6] definitions All those guys have the same form - "take a list of type/name pairs, apply some macro to each of them". Abstract that part away, convert all __SC_FOO##x(__VA_ARGS__) to __MAP(x,__SC_FOO,__VA_ARGS__). Signed-off-by: Al Viro --- include/linux/compat.h | 18 ++++------- include/linux/syscalls.h | 82 +++++++++++++++++++----------------------------- 2 files changed, 38 insertions(+), 62 deletions(-) (limited to 'include/linux') diff --git a/include/linux/compat.h b/include/linux/compat.h index 76a87fb57ac2..8c1dfc8d830d 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -27,12 +27,6 @@ #define __SC_DELOUSE(t,v) ((t)(unsigned long)(v)) #endif -#define __SC_CCAST1(t1, a1) __SC_DELOUSE(t1,a1) -#define __SC_CCAST2(t2, a2, ...) __SC_DELOUSE(t2,a2), __SC_CCAST1(__VA_ARGS__) -#define __SC_CCAST3(t3, a3, ...) __SC_DELOUSE(t3,a3), __SC_CCAST2(__VA_ARGS__) -#define __SC_CCAST4(t4, a4, ...) __SC_DELOUSE(t4,a4), __SC_CCAST3(__VA_ARGS__) -#define __SC_CCAST5(t5, a5, ...) __SC_DELOUSE(t5,a5), __SC_CCAST4(__VA_ARGS__) -#define __SC_CCAST6(t6, a6, ...) __SC_DELOUSE(t6,a6), __SC_CCAST5(__VA_ARGS__) #define COMPAT_SYSCALL_DEFINE1(name, ...) \ COMPAT_SYSCALL_DEFINEx(1, _##name, __VA_ARGS__) #define COMPAT_SYSCALL_DEFINE2(name, ...) \ @@ -49,19 +43,19 @@ #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS #define COMPAT_SYSCALL_DEFINEx(x, name, ...) \ - asmlinkage long compat_sys##name(__SC_DECL##x(__VA_ARGS__)); \ - static inline long C_SYSC##name(__SC_DECL##x(__VA_ARGS__)); \ - asmlinkage long compat_SyS##name(__SC_LONG##x(__VA_ARGS__)) \ + asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__));\ + static inline long C_SYSC##name(__MAP(x,__SC_DECL,__VA_ARGS__));\ + asmlinkage long compat_SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__))\ { \ - return (long) C_SYSC##name(__SC_CCAST##x(__VA_ARGS__)); \ + return C_SYSC##name(__MAP(x,__SC_DELOUSE,__VA_ARGS__)); \ } \ SYSCALL_ALIAS(compat_sys##name, compat_SyS##name); \ - static inline long C_SYSC##name(__SC_DECL##x(__VA_ARGS__)) + static inline long C_SYSC##name(__MAP(x,__SC_DECL,__VA_ARGS__)) #else /* CONFIG_HAVE_SYSCALL_WRAPPERS */ #define COMPAT_SYSCALL_DEFINEx(x, name, ...) \ - asmlinkage long compat_sys##name(__SC_DECL##x(__VA_ARGS__)) + asmlinkage long compat_sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) #endif /* CONFIG_HAVE_SYSCALL_WRAPPERS */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 313a8e0a6553..f9411f0c1c80 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -78,49 +78,31 @@ struct sigaltstack; #include #include -#define __SC_DECL1(t1, a1) t1 a1 -#define __SC_DECL2(t2, a2, ...) t2 a2, __SC_DECL1(__VA_ARGS__) -#define __SC_DECL3(t3, a3, ...) t3 a3, __SC_DECL2(__VA_ARGS__) -#define __SC_DECL4(t4, a4, ...) t4 a4, __SC_DECL3(__VA_ARGS__) -#define __SC_DECL5(t5, a5, ...) t5 a5, __SC_DECL4(__VA_ARGS__) -#define __SC_DECL6(t6, a6, ...) t6 a6, __SC_DECL5(__VA_ARGS__) - -#define __SC_LONG1(t1, a1) long a1 -#define __SC_LONG2(t2, a2, ...) long a2, __SC_LONG1(__VA_ARGS__) -#define __SC_LONG3(t3, a3, ...) long a3, __SC_LONG2(__VA_ARGS__) -#define __SC_LONG4(t4, a4, ...) long a4, __SC_LONG3(__VA_ARGS__) -#define __SC_LONG5(t5, a5, ...) long a5, __SC_LONG4(__VA_ARGS__) -#define __SC_LONG6(t6, a6, ...) long a6, __SC_LONG5(__VA_ARGS__) - -#define __SC_CAST1(t1, a1) (t1) a1 -#define __SC_CAST2(t2, a2, ...) (t2) a2, __SC_CAST1(__VA_ARGS__) -#define __SC_CAST3(t3, a3, ...) (t3) a3, __SC_CAST2(__VA_ARGS__) -#define __SC_CAST4(t4, a4, ...) (t4) a4, __SC_CAST3(__VA_ARGS__) -#define __SC_CAST5(t5, a5, ...) (t5) a5, __SC_CAST4(__VA_ARGS__) -#define __SC_CAST6(t6, a6, ...) (t6) a6, __SC_CAST5(__VA_ARGS__) - -#define __SC_TEST(type) BUILD_BUG_ON(sizeof(type) > sizeof(long)) -#define __SC_TEST1(t1, a1) __SC_TEST(t1) -#define __SC_TEST2(t2, a2, ...) __SC_TEST(t2); __SC_TEST1(__VA_ARGS__) -#define __SC_TEST3(t3, a3, ...) __SC_TEST(t3); __SC_TEST2(__VA_ARGS__) -#define __SC_TEST4(t4, a4, ...) __SC_TEST(t4); __SC_TEST3(__VA_ARGS__) -#define __SC_TEST5(t5, a5, ...) __SC_TEST(t5); __SC_TEST4(__VA_ARGS__) -#define __SC_TEST6(t6, a6, ...) __SC_TEST(t6); __SC_TEST5(__VA_ARGS__) +/* + * __MAP - apply a macro to syscall arguments + * __MAP(n, m, t1, a1, t2, a2, ..., tn, an) will expand to + * m(t1, a1), m(t2, a2), ..., m(tn, an) + * The first argument must be equal to the amount of type/name + * pairs given. Note that this list of pairs (i.e. the arguments + * of __MAP starting at the third one) is in the same format as + * for SYSCALL_DEFINE/COMPAT_SYSCALL_DEFINE + */ +#define __MAP1(m,t,a) m(t,a) +#define __MAP2(m,t,a,...) m(t,a), __MAP1(m,__VA_ARGS__) +#define __MAP3(m,t,a,...) m(t,a), __MAP2(m,__VA_ARGS__) +#define __MAP4(m,t,a,...) m(t,a), __MAP3(m,__VA_ARGS__) +#define __MAP5(m,t,a,...) m(t,a), __MAP4(m,__VA_ARGS__) +#define __MAP6(m,t,a,...) m(t,a), __MAP5(m,__VA_ARGS__) +#define __MAP(n,...) __MAP##n(__VA_ARGS__) + +#define __SC_DECL(t, a) t a +#define __SC_LONG(t, a) long a +#define __SC_CAST(t, a) (t) a +#define __SC_TEST(t, a) (void)BUILD_BUG_ON_ZERO(sizeof(type) > sizeof(long)) #ifdef CONFIG_FTRACE_SYSCALLS -#define __SC_STR_ADECL1(t, a) #a -#define __SC_STR_ADECL2(t, a, ...) #a, __SC_STR_ADECL1(__VA_ARGS__) -#define __SC_STR_ADECL3(t, a, ...) #a, __SC_STR_ADECL2(__VA_ARGS__) -#define __SC_STR_ADECL4(t, a, ...) #a, __SC_STR_ADECL3(__VA_ARGS__) -#define __SC_STR_ADECL5(t, a, ...) #a, __SC_STR_ADECL4(__VA_ARGS__) -#define __SC_STR_ADECL6(t, a, ...) #a, __SC_STR_ADECL5(__VA_ARGS__) - -#define __SC_STR_TDECL1(t, a) #t -#define __SC_STR_TDECL2(t, a, ...) #t, __SC_STR_TDECL1(__VA_ARGS__) -#define __SC_STR_TDECL3(t, a, ...) #t, __SC_STR_TDECL2(__VA_ARGS__) -#define __SC_STR_TDECL4(t, a, ...) #t, __SC_STR_TDECL3(__VA_ARGS__) -#define __SC_STR_TDECL5(t, a, ...) #t, __SC_STR_TDECL4(__VA_ARGS__) -#define __SC_STR_TDECL6(t, a, ...) #t, __SC_STR_TDECL5(__VA_ARGS__) +#define __SC_STR_ADECL(t, a) #a +#define __SC_STR_TDECL(t, a) #t extern struct ftrace_event_class event_class_syscall_enter; extern struct ftrace_event_class event_class_syscall_exit; @@ -217,10 +199,10 @@ extern struct trace_event_functions exit_syscall_print_funcs; #ifdef CONFIG_FTRACE_SYSCALLS #define SYSCALL_DEFINEx(x, sname, ...) \ static const char *types_##sname[] = { \ - __SC_STR_TDECL##x(__VA_ARGS__) \ + __MAP(x,__SC_STR_TDECL,__VA_ARGS__) \ }; \ static const char *args_##sname[] = { \ - __SC_STR_ADECL##x(__VA_ARGS__) \ + __MAP(x,__SC_STR_ADECL,__VA_ARGS__) \ }; \ SYSCALL_METADATA(sname, x); \ __SYSCALL_DEFINEx(x, sname, __VA_ARGS__) @@ -234,21 +216,21 @@ extern struct trace_event_functions exit_syscall_print_funcs; #define SYSCALL_DEFINE(name) static inline long SYSC_##name #define __SYSCALL_DEFINEx(x, name, ...) \ - asmlinkage long sys##name(__SC_DECL##x(__VA_ARGS__)); \ - static inline long SYSC##name(__SC_DECL##x(__VA_ARGS__)); \ - asmlinkage long SyS##name(__SC_LONG##x(__VA_ARGS__)) \ + asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)); \ + static inline long SYSC##name(__MAP(x,__SC_DECL,__VA_ARGS__)); \ + asmlinkage long SyS##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \ { \ - __SC_TEST##x(__VA_ARGS__); \ - return (long) SYSC##name(__SC_CAST##x(__VA_ARGS__)); \ + __MAP(x,__SC_TEST,__VA_ARGS__); \ + return SYSC##name(__MAP(x,__SC_CAST,__VA_ARGS__)); \ } \ SYSCALL_ALIAS(sys##name, SyS##name); \ - static inline long SYSC##name(__SC_DECL##x(__VA_ARGS__)) + static inline long SYSC##name(__MAP(x,__SC_DECL,__VA_ARGS__)) #else /* CONFIG_HAVE_SYSCALL_WRAPPERS */ #define SYSCALL_DEFINE(name) asmlinkage long sys_##name #define __SYSCALL_DEFINEx(x, name, ...) \ - asmlinkage long sys##name(__SC_DECL##x(__VA_ARGS__)) + asmlinkage long sys##name(__MAP(x,__SC_DECL,__VA_ARGS__)) #endif /* CONFIG_HAVE_SYSCALL_WRAPPERS */ -- cgit v1.2.3 From 4a0fd5bf0fd0795af8f1be3b261f5cf146a4cb9b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 21 Jan 2013 15:16:58 -0500 Subject: teach SYSCALL_DEFINE how to deal with long long/unsigned long long ... and convert a bunch of SYSCALL_DEFINE ones to SYSCALL_DEFINE, killing the boilerplate crap around them. Signed-off-by: Al Viro --- include/linux/syscalls.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deleti